Partial melting due to breakdown of an epidote‐group mineral during exhumation of ultrahigh‐pressure eclogite: An example from the North‐East Greenland Caledonides

In the North‐East Greenland Caledonides, P–T conditions and textures are consistent with partial melting of ultrahigh‐pressure (UHP) eclogite during exhumation. The eclogite contains a peak assemblage of garnet, omphacite, kyanite, coesite, rutile, and clinozoisite; in addition, phengite is inferred to have been present at peak conditions. An isochemical phase equilibrium diagram, along with garnet isopleths, constrains peak P–T conditions to be subsolidus at 3.4 GPa and 940°C. Zr‐in‐rutile thermometry on inclusions in garnet yields values of ~820°C at 3.4 GPa. In the eclogite, plagioclase may exhibit cuspate textures against surrounding omphacite and has low dihedral angles in plagioclase–clinopyroxene–garnet aggregates, features that are consistent with former melt–solid–solid boundaries and crystallized melt pockets. Graphic intergrowths of plagioclase and amphibole are present in the matrix. Small euhedral neoblasts of garnet against plagioclase are interpreted as formed from a peritectic reaction during partial melting. Polymineralic inclusions of albite+K‐feldspar and clinopyroxene+quartz±kyanite±plagioclase in large anhedral garnet display plagioclase cusps pointing into the host, which are interpreted as crystallized melt pockets. These textures, along with the mineral composition, suggest partial melting of the eclogite by reactions involving phengite and, to a large extent, an epidote‐group mineral. Calculated and experimentally determined phase relations from the literature reveal that partial melting occurred on the exhumation path, at pressures below the coesite to quartz transition. A calculated P–T phase diagram for a former melt‐bearing domain shows that the formation of the peritectic garnet rim occurred at 1.4 GPa and 900°C, with an assemblage of clinopyroxene, amphibole, and plagioclase equilibrated at 1.3 GPa and 720°C. Isochemical phase equilibrium modelling of a symplectite of clinopyroxene, plagioclase, and amphibole after omphacite, combined with the mineral composition, yields a P–T range at 1.0–1. 6 GPa, 680–1,000°C. The assemblage of amphibole and plagioclase is estimated to reach equilibrium at 717–732°C, calculated by amphibole–plagioclase thermometry for the former melt‐bearing domain and symplectite respectively. The results of this study demonstrate that partial melt formed in the UHP eclogite through breakdown of an epidote‐group mineral with minor involvement of phengite during exhumation from peak pressure; melt was subsequently crystallized on the cooling path.     

苏鲁地体超高压矿物的三维空间分布

采用激光拉曼技术,配备电子探针和阴极发光测试,确认苏鲁地体大多数花岗质片麻岩,所有类型片麻岩、斜长角闪岩、蓝晶石英岩和大理岩的锆石中均隐藏以柯石英为代表的超高压包体矿物组合。其中花岗质片麻岩典型超高压包体矿物为柯石英±多硅白云母;副片麻岩为柯石英+石榴子石+绿辉石、柯石英±石榴子石+硬玉+多硅白云母+磷灰石、柯石英+多硅白云母±磷灰石;斜长角闪岩为柯石英+石榴子石+绿辉石±金红石;蓝晶石英岩为柯石英+蓝晶石+金红石+磷灰石、柯石英+蓝晶石+多硅白云母+金红石;大理岩为柯石英+透辉石、柯石英+橄榄石。表明苏鲁地体由榴辉岩及其围岩所组成的巨量陆壳物质曾普遍发生深俯冲,并经历了超高压变质作用。锆石的矿物包体分布特征及相应的阴极发光图像研究表明,在同一样品中,锆石的成因特征存在明显差异。有的锆石显示继承性(碎屑)锆石的核(core)、超高压变质的幔(mantle)和退变质的边(rim);有的锆石则具有超高压的核、幔和退变质的边;而有的锆石却记录了深俯冲的核、超高压的幔和退变质的边。标志着苏鲁超高压变质带各类岩石副矿物锆石均具有十分复杂的结晶生长演化历史。因此,在充分研究锆石中矿物包体性质、分布特征以及相应阴极发光图像的基础上,采用SHRIMP离子探针技术,在锆石晶体的不同     

中国大陆科学钻探主孔0～4500米变质岩石锆石中保存的超高压矿物包体

中国大陆科学钻探主孔0-4500米的岩心主要由榴辉岩、斜长角闪岩、副片麻岩、正片麻岩以及少量的超基性岩所组成。岩相学研究结果表明,榴辉岩的围岩普遍经历了强烈角闪岩相退变质作用的改造,峰期超高压变质的矿物组合已完全被后期退变质过程中角闪岩相矿物组合所替代。采用激光拉曼技术,配备电子探针和阴极发光测试,发现主孔224件岩心中有121件(包括榴辉岩、斜长角闪岩、副片麻岩和正片麻岩)样品的锆石中普遍隐藏以柯石英为代表的超高压矿物包体,且不同岩石类型锆石中所保存的超高压矿物包体组合存在明显差异。(含多硅白云母)金红石石英榴辉岩锆石中保存的典型超高压包体矿物组合为柯石英 石榴石、柯石英 石榴石 绿辉石 金红石和柯石英 多硅白云母 磷灰石。黑云绿帘斜长角闪岩锆石中保存的超高压矿物组合为柯石英 石榴石 绿辉石、柯石英 石榴石 多硅白云母和柯石英 绿辉石 金红石,与榴辉岩所保存的超高压矿物组合十分相似,表明该类斜长角闪岩是由超高压榴辉岩在构造折返过程中退变质而成。在副片麻岩类岩石,如石榴绿帘黑云二长片麻岩锆石中,代表性的超高压包体矿物组合为柯石英 多硅白云母和柯石英 石榴石等;而在石榴黑云角闪钠长片麻岩锆石中,则保存柯石英 硬玉 石榴石 磷灰石、柯石英 硬玉 多硅白云母 磷灰石和柯石英 石榴石 磷灰石等超高压矿物包体。在正片麻岩锆石中,标志性的超高压矿物包体为柯石英、柯石英 多硅白云母、柯石英 蓝晶石 磷灰石和柯石英 蓝晶石 榍石等。此外,在南苏鲁东海至临沭一带的地表露头以及一系列卫星孔岩心的锆石中,也普遍发现以柯石英为代表的标志性超高压矿物包体,表明在南苏鲁地区由榴辉岩及其围岩的原岩所组成的巨量陆壳物质(方圆>5000km2,厚度超过4.5km)曾整体发生深俯冲,并经历了超高压变质作用。该项研究对于重塑苏鲁-大别超高压变质带俯冲-折返的动力学模式有着重要的科学意义。     

Coesite inclusions and prograde compositional zonation of garnet in whiteschist of the HP-UHPM Kokchetav massif, Kazakhstan: a record of progressive UHP metamorphism

Coarse-grained whiteschist, containing the assemblage: garnet+kyanite+phengite+talc+quartz/coesite, is an abundant constituent of the ultrahigh-pressure metamorphic (UHPM) belt in the Kulet region of the Kokchetav massif of Kazakhstan.

Garnet displays prograde compositional zonation, with decreasing spessartine and increasing pyrope components, from core to rim. Cores were recrystallized at T=380°C (inner) to 580°C (outer) at P<10 kbar (garnet–ilmenite geothermometry, margarite+quartz stability), and mantles at T=720–760°C and P_H20=34–36 kbar (coesite+graphite stability, phengite geobarometer, KFMASH system reaction equilibria). Textural evidence indicates that rims grew during decompression and cooling, within the Qtz-stability field.

Silica inclusions (quartz and/or coesite) of various textural types within garnets display a systematic zonal distribution. Cores contain abundant inclusions of euhedral quartz (type 1 inclusions). Inner mantle regions contain inclusions of polycrystalline quartz pseudomorphs after coesite (type 2), with minute dusty micro-inclusions of chlorite, and more rarely, talc and kyanite in their cores; intense radial and concentric fractures are well developed in the garnet. Intermediate mantle regions contain bimineralic inclusions with coesite cores and palisade quartz rims (type 3), which are also surrounded by radial fractures. Subhedral inclusions of pure coesite without quartz overgrowths or radial fractures (type 4) occur in the outer part of the mantle. Garnet rims are silica-inclusion-free.

Type 1 inclusions in garnet cores represent the low-P, low-T precursor stage to UHPM recrystallization, and attest to the persistence of low-P assemblages in the coesite-stability field. Coesites in inclusion types 2, 3, and 4 are interpreted to have sequentially crystallized by net transfer reaction (kyanite+talc=garnet+coesite+H₂O), and were sequestered within the garnet with progressively decreasing amounts of intragranular aqueous fluid.

During the retrograde evolution of the rock, all three inclusion types diverged from the host garnet P–T path at the coesite–quartz equilibrium, and followed a trajectory parallel to the equilibrium boundary resulting in inclusion overpressure. Coesite in type 2 inclusions suffered rapid intragranular H₂O-catalysed transformation to quartz, and ruptured the host garnet at about 600°C (when inclusion P27 kbar, garnet host P9 kbar). Instantaneous decompression to the host garnet P–T path, passed through the kyanite+talc=chlorite+quartz reaction equilibrium, resulting in the dusty micro-assemblage in inclusion cores. Type 3 inclusions suffered a lower volumetric proportion transformation to quartz at the coesite–quartz equilibrium, and finally underwent rupture and decompression when T<400°C, facilitating coesite preservation. Type 4 coesite inclusions are interpreted to have suffered minimal transformation to quartz and proceeded to surface temperature conditions along or near the coesite–quartz equilibrium boundary.     

Geothermobarometry of UHP and HP eclogites and schists – an evaluation of equilibria among garnet–clinopyroxene–kyanite–phengite–coesite/quartz

Geothermometry of eclogites and other high pressure (HP)/ultrahigh‐pressure (UHP) rocks has been a challenge, due to severe problems related to the reliability of the garnet–clinopyroxene Fe–Mg exchange thermometer to omphacite‐bearing assemblages. Likewise, reliable geobarometers for eclogites and related HP/UHP rocks are scarce. In this paper, a set of internally consistent geothermobarometric expressions have been formulated for reactions between the UHP assemblage garnet–clinopyroxene–kyanite–phengite–coesite, and the corresponding HP assemblage garnet–clinopyroxene–kyanite–phengite–quartz. In the system KCMASH, the end members grossular (Grs) and pyrope (Prp) in garnet, diopside (Di) in clinopyroxene, muscovite (Ms) and celadonite (Cel) in phengite together with kyanite and coesite or quartz define invariant points in the coesite and quartz stability field, respectively, depending on which SiO₂ polymorph is stable. Thus, a set of net transfer reactions including these end members will uniquely define equilibrium temperatures and pressures for phengite–kyanite–SiO₂‐bearing eclogites. Application to relevant eclogites from various localities worldwide show good consistency with petrographic evidence. Eclogites containing either coesite or polycrystalline quartz after coesite all plot within the coesite stability field, while typical quartz‐bearing eclogites with no evidence of former coesite fall within the quartz stability field. Diamondiferous coesite–kyanite eclogite and grospydite xenoliths in kimberlites all fall into the diamond stability field. The present method also yields consistent values as compared with the garnet–clinopyroxene Fe–Mg geothermometer for these kinds of rocks, but also indicates some unsystematic scatter of the latter thermometer. The net transfer geothermobarometric method presented in this paper is suggested to be less affected by later thermal re‐equilibration than common cation exchange thermometers.     

Evidence for UHP anatexis in the Shuanghe UHP paragneiss from inclusions in clinozoisite,garnet, and zircon

The Shuanghe garnet-bearing paragneiss from the Dabie ultra-high–pressure (UHP) orogen occurs as an interlayer within partially retrogressed eclogite. A first UHP metamorphic stage at 680°C, 3.8–4.1 GPa is documented by Zr-in-rutile temperatures coupled with phengite inclusions (Si = 3.55) in clinozoisite and grossular-rich garnet. Relic matrix phengite and phengite inclusions in zircon rims display lower Si of 3.42. Combined with garnet compositions and Ti-in-zircon temperatures, they provide evidence for a second UHP metamorphic stage at 800–850°C, ~3.8 GPa. Such isobaric heating at UHP conditions has not been documented so far from the adjacent eclogites and other rock types in the Dabie orogen and indicates proximity to the hot, convecting mantle wedge. The dominant mineral assemblage consisting of plagioclase, epidote, biotite, and amphibole provides evidence for widespread retrogression during the exhumation of the UHP paragneiss. Several types of polyphase mineral inclusions were identified. Phengite inclusions hosted by clinozoisite are partially replaced by kyanite and K-feldspar, whereas inclusions in host garnet consist of relic phengite, K-feldspar, and garnet, indicating limited sub-solidus dehydration of phengite by the reaction Ph→Kfs+Ky±Grt+fluid. Tightly intergrown K-feldspar and quartz are preserved as inclusions with sharp boundaries and radial cracks in garnet. Analyses of whole inclusions also show small enrichments in light rare earth elements. These inclusions are interpreted to be derived from melting of an inclusion assemblage consisting of Ph+Coe±Czo. A third type of polyphase inclusion consists of typical nanogranite (Ab+Kfs+Qz±Ep) inclusions in recrystallized metamorphic zircon. Ti-in-zircon thermometry and the Si content of phengite included in these zircon domains indicate that melting occurred at 800–850°C and 3.8–4.0 GPa during isobaric heating at UHP conditions. The partial melting event led to an equilibration of trace elements in garnet, phengite, and apatite. Using published partition coefficients between these minerals and hydrous granitic melt, the trace element composition of the UHP anatectic melt can be constrained. The melts are characterized by high LILE contents and pronounced relative enrichments of U over Th and Ta over Nb. The REE are below primitive mantle values, likely due to the presence of residual clinozoisite and garnet during partial melting. So far, no major granitic bodies have been found that share the same trace element pattern as the partial melts from the UHP anatexis of the Shuanghe paragneiss.     

Integrating X‐ray mapping and microtomography of garnet with thermobarometry to define the P–T evolution of the (near) UHP Międzygórze eclogite,Sudetes, SW Poland

Detailed X‐ray compositional mapping and microtomography have revealed the complex zoning and growth history of garnet in a kyanite‐bearing eclogite. The garnet occurs as clusters of coalesced grains with cores revealing slightly higher Ca and lower Mg than the rims forming the coalescence zones between the grains. Core regions of the garnet host inclusions of omphacite with the highest jadeite, and phengite with the highest Si, similar to values in the cores of omphacite and phengite located in the matrix. Therefore, the core compositions of garnet, omphacite, and phengite have been chosen for the peak pressure estimate. Coupled conventional thermobarometry, average P–T, and phase equilibrium modelling in the NCKFMMnASHT system yields P–T conditions of 26–30 kbar at 800–930°C. Although coesite is not preserved, these P–T conditions partially overlap the coesite stability field, suggesting near ultra‐high–pressure (UHP) conditions during the formation of this eclogite. Therefore, the peak pressure assemblage is suggested to have been garnet–omphacite–kyanite–phengite–coesite/quartz–rutile. Additional lines of evidence for the possible UHP origin of the Mi?dzygórze eclogite are the presence of rod‐shaped inclusions of quartz parallel to the c‐axis in omphacite as well as relatively high values of Ca‐Tschermak and Ca‐Eskola components. Late zoisite, rare diopside–plagioclase symplectites rimming omphacite, and minor phlogopite–plagioclase symplectites replacing phengite formed during retrogression together with later amphibole. These retrograde assemblages lack minerals typical of granulite facies, which suggests simultaneous decompression and cooling during exhumation before the crustal‐scale folding that was responsible for final exhumation of the eclogite.     

Dehydration melting of ultrahigh‐pressure eclogite in the Dabie orogen: evidence from multiphase solid inclusions in garnet

Several types of multiphase solid (MS) inclusions are identified in garnet from ultrahigh‐pressure (UHP) eclogite in the Dabie orogen. The mineralogy of MS inclusions ranges from pure K‐feldspar to pure quartz, with predominance of intermediate types consisting of K‐feldspar + quartz ± silicate (plagioclase or epidote) ± barite. The typical MS inclusions are usually surrounded with radial cracks in the host garnet, similar to where garnet contains relict coesite. Barite aggregates display significant heterogeneity in major element composition, with total contents of only 57–73% and highly variable SiO₂ contents of 0.32–25.85% that are positively correlated with BaO and SO₃ contents. The occurrence of MS inclusions provides petrographic evidence for partial melting in the UHP metamorphic rock. The occurrence of barite aggregates with variably high SiO₂ contents suggests the coexistence of aqueous fluid with hydrous melt under HP eclogite facies conditions. Thus, local dehydration melting is inferred to take place inside the UHP metamorphic slice during continental collision. This is ascribed to phengite breakdown during ‘hot’ exhumation of the deeply subducted continental crust. As a consequence, the aqueous fluid is internally buffered in chemical composition and its local sink is a basic trigger to the partial melting during the continental subduction‐zone metamorphism.     

The pyrope-coesite rocks and their country rocks at Parigi,Dora Maira Massif,Western Alps: detailed petrography,mineral chemistry and PT-path

Both the coarse- and fine-grained varieties of the partly coesite-bearing pyrope-quartzites, their interlayered jadeite-kyanite rocks, and the biotite-phengite gneiss country rock common to all of them were subjected to detailed petrographic and textural studies in order to determine the sequence of crystallisation of their mineral constituents, which were also studied analytically by microprobe. Prior to pyrope and coesite growth, the Mg-rich metapelites were talc-kyanite-chlorite-rutile-ellenbergerite schists which — upon continued prograde metamorphism — developed first pyrope megacrysts in silica-deficient local environments at the expense of chlorite + talc + kyanite, and subsequently the smaller pyrope crystals with coesite inclusions from reacting talc + kyanite. Based on geobarometrically useful mineral inclusions as well as on experimentally determined phase relations, a prograde PT-path — simplified for water activity = 1 — is constructed which passes through the approximate PT-conditions 16 kbar and 560° C, 29 kbar and 720° C, and finally up to 37 kbar at about 800° C, where the Mg-rich metapelite was a pyrope-coesite rock with phengite, kyanite, and talc still present. During the retrograde path, pyrope was altered metasomatically either into phlogopite + kyanite + quartz or, at a later stage, to chlorite + muscovite + quartz. Both assemblages yield PT-constraints, the latter about 7–9 kbar, 500–600° C. The country rock gneisses have also endured high-pressures of at least 15 kbar, but they provide mostly constraints on the lowest portion of the uplift conditions within the greenschist facies (about 5 kbar, 450° C). Microprobe data are presented for the following minerals: pyrope, ellenbergerite, dumortierite (unusually MgTi-rich), jadeite, vermiculite (formed after Na-phlogopite?), paragonite, and for several generations of phengite, chlorite, talc, phlogopite, dravite, and glaucophane in the high-pressure rocks, as well as for biotite, chlorite, phengites, epidote, garnet, albite, and K-feldspar in the country rock gneisses. An outstanding open problem identified in this study is the preservation of minerals as inclusions within kyanite and pyrope beyond their PT-stability limits.     

Experimental evidence for diamond-facies metamorphism in the Dora-Maira massif

The peak metamorphic conditions of subducted continental crust in the Dora-Maira massif (Western Alps) have been revised by combining experimental results in the KCMASH system with petrologic information from whiteschists. Textural observations in whiteschists suggest that the peak metamorphic assemblage garnet+phengite+kyanite+coesite±talc originates from the reaction kyanite+talc↔garnet+coesite+liquid. In the experimentally determined petrogenetic grid, this reaction occurs above 45 kbar at 730 °C. At lower pressures, talc reacts either to orthopyroxene and coesite or, together with phengite, to biotite, coesite and kyanite. The liberated liquid contains probably similar amounts of H₂O and dissolved granitic components. The composition of the liquid in the whiteschists at peak metamorphic conditions, a major unknown in earlier studies, was probably very similar to the liquid composition produced in the experiments. Therefore, the experimentally determined petrogenetic grid represents a good model for the estimation of the peak metamorphic conditions in whiteschists. Experimentally determined Si-isopleths for phengite further constrain peak pressures to 43 kbar for the measured Si=3.60 of phengite in the natural whiteschists. All these data provide evidence that the whiteschists reached diamond-facies conditions.

The fluid-absent equilibrium 4 kyanite+3 CELADONITE=4 coesite+3 muscovite+pyrope has been calibrated on the basis of garnet and phengite compositions in the experiments and serves as a geothermobarometer for ultra-high-pressure (UHP) metapelites. For graphite-bearing metapelites and kyanite–phengite eclogites, forming the country rocks of the whiteschists, peak metamorphic pressures of about 44±3 kbar were calculated from this barometer for temperatures of 750 °C estimated from garnet–phengite thermometry. Therefore, the whole ultra-high-pressure unit of the Dora-Maira massif most likely experienced peak metamorphic conditions in the diamond stability field. While graphite is common in the metapelites, diamond has not been found so far. The absence of metamorphic microdiamonds might be explained by the low temperature of metamorphism, the absence of a free fluid phase in the metapelites and a short residence time in diamond-facies conditions resulting in kinetic problems in the conversion of graphite to diamond.     

P–T evolution of kyanite eclogite from the Pirin Mountains (SW Bulgaria): implications for the Rhodope UHP Metamorphic Complex

A new occurrence of kyanite eclogite in the Pirin Mountains of southwestern Bulgaria within the rocks belonging to the Obidim Unit of the Rhodope Metamorphic Complex is presented. This eclogite provides important information about the peak–pressure conditions despite strong thermal overprint at low pressure. Textural relationships, phase equilibrium modelling and conventional geothermobarometry were used to constrain the metamorphic evolution. Garnet porphyroblasts with inclusions of omphacite (up to 43 mol.% Jd), phengite (up to 3.5 Si p.f.u.), kyanite, polycrystalline quartz, pargasitic amphibole, zoisite and rutile in the Mg‐rich cores (X_Mg = 0.44–0.46) record a prograde increase in P–T conditions from ～2.5 GPa and 650 °C to ～3 GPa and 700–750 °C. Maximum pressure values fall within the stability field of coesite. During exhumation, the peak–pressure assemblage garnet + omphacite + phengite + kyanite was variably overprinted by a lower pressure one forming symplectitic textures, such as diopside + plagioclase after omphacite and biotite + plagioclase after phengite. The development of spinel (X_Mg = 0.4–0.45) + corundum + anorthite assemblage in the kyanite‐bearing domains at ～1.1 GPa and 800–850 °C suggests a thermal overprint in the high‐pressure granulite facies stability field. This thermal event was followed by cooling at ～0.8 GPa under amphibolite facies conditions; retrograde kelyphite texture involving plagioclase and amphibole was developed around garnet. Our results add to the already existing evidence for ultra high pressure (UHP) metamorphism in the Upper Allochthon of the Rhodope Metamorphic Complex as in the Kimi Unit and show that it is more widespread than previously known. Published age data and field structural relations suggest that the Obidim Unit represents Variscan continental crust involved into the Alpine nappe edifice of the Rhodopes and that eclogite facies metamorphism was Palaeozoic, in contrast to the Kimi Unit where age determinations suggest a Jurassic or Cretaceous age for UHP metamorphism. This implies that UHP metamorphism in the Upper Allochthon of the Rhodopes may have occurred twice, during Alpine and pre‐Alpine orogenic events, and that two independent HP/UHP provinces of different age overlap in this area.     

苏北东海青龙山变斑状榴辉岩的变质演化

青龙山部分榴辉岩以含绿帘石、蓝晶石和滑石变斑晶为特征,但是其峰变质矿物组合由基质中细粒的石榴石+绿辉石+多硅白云母+柯石英+金红石+绿帘石构成,它们定向分布形成片理构造。相图中石榴石组成等值线温压计确定的峰变质组合为:石榴石+绿辉石+多硅白云母+蓝晶石+金红石+柯石英+硬柱石+滑石,与岩相学观察结果不符。这可能是超高压变质流体显著偏离计算相图假设的流体相为纯水所致。无定向的变斑晶切割片理,晚于峰变质组合结晶于弱剪切应力的环境。岩相学观察和相图模拟结果显示,变斑晶的形成顺序为蓝晶石-绿帘石-滑石。绿帘石在<2GPa大量生长形成变斑晶,它包含柯石英并不一定说明二者平衡共生,更可能是温压快速下降后峰变质组合被绿帘石变斑晶包含。由矿物组合限定的青龙山变斑状榴辉岩P-T路径为典型的"发卡式"。含水矿物出现于岩石的各个变质组合,并且沿退变质P-T路径陆续结晶数量增多,表明在退变质过程中不断有流体渗入岩石。     

Petrology of ultrahigh-pressure rocks from the southern Su-Lu region, eastern China

Abstract In the Su-Lu ultrahigh- P terrane, eastern China, many coesite-bearing eclogite pods and layers within biotite gneiss occur together with interlayered metasediments now represented by garnet-quartz-jadeite rock and kyanite quartzite. In addition to garnet + omphacite + rutile + coesite, other peak-stage minerals in some eclogites include kyanite, phengite, epidote, zoisite, talc, nyböite and high-Al titanite. The garnet-quartz-jadeite rock and kyanite quartzite contain jadeite + quartz + garnet + rutile ± zoisite ± apatite and quartz + kyanite + garnet + epidote + phengite + rutile ± omphacite assemblages, respectively. Coesite and quartz pseudomorphs after coesite occur as inclusions in garnet, omphacite, jadeite, kyanite and epidote from both eclogites and metasediments. Study of major elements indicates that the protolith of the garnet-quartz jadeite rock and the kyanite quartzite was supracrustal sediments. Most eclogites have basaltic composition; some have experienced variable 'crustal'contamination or metasomatism, and others may have had a basaltic tuff or pyroclastic rock protolith.
The Su-Lu ultrahigh- P rocks have been subjected to multi-stage recrystallization and exhibit a clockwise P-T path. Inclusion assemblages within garnet record a pre-eclogite epidote amphibolite facies metamorphic event. Ultrahigh- P peak metamorphism took place at 700–890° C and P >28 kbar at c . 210–230 Ma. The symplectitic assemblage plagioclase + hornblende ± epidote ± biotite + titanite implies amphibolite facies retrogressive metamorphism during exhumation at c . 180–200 Ma. Metasedimentary and metamafic lithologies have similar P-T paths. Several lines of evidence indicate that the supracrustal rocks were subducted to mantle depths and experienced in-situ ultrahigh- P metamorphism during the Triassic collision between the Sino-Korean and Yangtze cratons.     

The Habutengsu metapelites and metagreywackes in western Tianshan,China: metamorphic evolution and tectonic implications

The HP‐UHP metamorphic belt of western Tianshan in northwestern China is a rarely preserved oceanic UHP terrane which consists predominantly of meta‐siliciclastic rocks, occasionally accompanied by lens‐shaped metabasites. The metapelites and metagreywackes from the Habutengsu Valley and adjacent area within this belt contain quartz, albite, garnet, white mica, chlorite and rutile/titanite, with or without minor amounts of barroisite, glaucophane, clinozoisite, allanite, graphite, carbonate and tourmaline. Included in coarse‐grained garnet, pseudomorphs of clinozoisite + paragonite after lawsonite are common, seldom also together with inclusions of chloritoid, jadeite and glaucophane. In the northern Habutengsu area, garnet is compositionally characterized by similar cores with consistently low‐Ca content. Similar garnet armouring coesite has been reported in UHP schists from the same area. Deduced P–T conditions during formation of these Ca‐poor garnet cores are 25–31 kbar and 430–510 °C, which are consistent with the computed stability of the observed assemblage Grt + Gln + Lws ± Jd ± Cld in the coesite stability field. Thus, the occurrences of the UHP metapelites and metagreywackes define an internally coherent UHP unit in the north of the Habutengsu area, the spatial extension of which is much larger than previously known. Compared with the northern ones, the southern metapelites and metagreywackes in the Habutengsu area consist of similar minerals and have similar bulk rock compositions but significantly different garnet chemistry, indicating an abrupt variation in P–T conditions during garnet growth. The derived conditions initiating the garnet growth for the southern rocks in a similar range (18–21 kbar and 450–500 °C) and thus constrain a coherent HP unit in the south of the Habutengsu area. The juxtaposition of two exhumed slices of contrasting metamorphic grades probably indicates the change of subduction dynamics of the palaeo‐Tianshan oceanic crust, the subduction polarity (from south to north) of which accounts for the spatial relationship between these two units.     

Phase equilibria and metamorphic evolution of glaucophane‐bearing UHP eclogites from the Western Dabieshan Terrane,Central China

Glaucophane‐bearing ultrahigh pressure (UHP) eclogites from the western Dabieshan terrane consist of garnet, omphacite, glaucophane, kyanite, epidote, phengite, quartz/coesite and rutile with or without talc and paragonite. Some garnet porphyroblasts exhibit a core–mantle zoning profile with slight increase in pyrope content and minor or slight decrease in grossular and a mantle–rim zoning profile characterized by a pronounced increase in pyrope and rapid decrease in grossular. Omphacite is usually zoned with a core–rim decrease in j(o) [=Na/(Ca + Na)]. Glaucophane occurs as porphyroblasts in some samples and contains inclusions of garnet, omphacite and epidote. Pseudosections calculated in the NCKMnFMASHO system for five representative samples, combined with petrographic observations suggest that the UHP eclogites record four stages of metamorphism. (i) The prograde stage, on the basis of modelling of garnet zoning and inclusions in garnet, involves P–T vectors dominated by heating with a slight increase in pressure, suggesting an early slow subduction process, and P–T vectors dominated by a pronounced increase in pressure and slight heating, pointing to a late fast subduction process. The prograde metamorphism is predominated by dehydration of glaucophane and, to a lesser extent, chlorite, epidote and paragonite, releasing ～27 wt% water that was bound in the hydrous minerals. (ii) The peak stage is represented by garnet rim compositions with maximum pyrope and minimum grossular contents, and P–T conditions of 28.2–31.8 kbar and 605–613 °C, with the modelled peak‐stage mineral assemblage mostly involving garnet + omphacite + lawsonite + talc + phengite + coesite ± glaucophane ± kyanite. (iii) The early decompression stage is characterized by dehydration of lawsonite, releasing ～70–90 wt% water bound in the peak mineral assemblages, which results in the growth of glaucophane, j(o) decrease in omphacite and formation of epidote. And, (iv) The late retrograde stage is characterized by the mineral assemblage of hornblendic amphibole + epidote + albite/oligoclase + quartz developed in the margins or strongly foliated domains of eclogite blocks due to fluid infiltration at P–T conditions of 5–10 kbar and 500–580 °C. The proposed metamorphic stages for the UHP eclogites are consistent with the petrological observations, but considerably different from those presented in the previous studies.     

Vapor-Absent Melting of Tonalite at 15-32 kbar

The behavior of igneous continental crust during subductionis modeled by means of vapor-absent partial melting experimentson a tonalite, containing equal amounts of biotite and hornblende,at pressures of 15–32 kbar. The experiments produce leucograniticmelts coexisting with garnet + omphacitic clinopyroxene + K-feldspar+ kyanite + quartz/coesite ± phengite ± zoisite.Experimental constraints and geometrical analysis of phase equilibriashow that the hydrous phases that control dehydration-meltingof tonalites in deep thickened continental crust and in theupper mantle are phengite and zoisite. The negatively slopingamphibole + quartz vapor-absent solidus characteristic of amphibolitesis largely suppressed in tonalites, because amphibole is eliminatedby water-conserving reactions that also consume K-feldspar andkyanite and produce phengite and zoisite. The temperature atwhich melt first appears in the experiments varies from <900°Cat 15 kbar, to 1000°C at 27 kbar, to <925°C at 32kbar. Moderate degrees of partial melting (20–30%) yieldresidual assemblages with mantle-like densities but which canstill contain minor amounts of hydrous phases. Partial meltingof tonalitic crust during continental subduction can thus generateincompatible element-rich residues that would be able to remainin the mantle indefinitely, acting as long-term sources of metasomaticfluids. KEY WORDS: mantle; melting; metasomatism; tonalite; UHP metamorphism     

Factors affecting preservation of coesite in ultrahigh‐pressure metamorphic rocks: Insights from TEM observations of dislocations within kyanite

To understand the preservation of coesite inclusions in ultrahigh‐pressure (UHP) metamorphic rocks, an integrated petrological, Raman spectroscopic and focussed ion beam (FIB) system–transmission electron microscope (TEM) study was performed on a UHP kyanite eclogite from the Sulu belt in eastern China. Coesite grains have been observed only as rare inclusions in kyanite from the outer segment of garnet and in the matrix. Raman mapping analysis shows that a coesite inclusion in kyanite from the garnet rim records an anisotropic residual stress and retains a maximum residual pressure of ~0.35 GPa. TEM observations show quartz is absent from the coesite inclusion–host kyanite grain boundaries. Numerous dislocations and sub‐grain boundaries are present in the kyanite, but dislocations are not confirmed in the coesite. In particular, dislocations concentrate in the kyanite adjacent to the boundary with the coesite inclusion, and they form a dislocation concentration zone with a dislocation density of ~10⁹ cm^?2. A high‐resolution TEM image and a fast Fourier transform‐filtered image reveal that a tiny dislocation in the dislocation concentration zone is composed of multiple edge dislocations. The estimated dislocation density in most of the kyanite away from the coesite inclusion–host kyanite grain boundaries is ~10⁸ cm^?2, being lower than that in kyanite adjacent to the coesite. In the case of a coesite inclusion in a matrix kyanite, using Raman and TEM analyses, we could not identify any quartz at the grain boundaries. Dislocations are not observed in the coesite, but numerous dislocations and stacking faults are developed in the kyanite. The estimated overall dislocation density in the coesite‐bearing matrix kyanite is ~10⁸ cm^?2, but a high dislocation density region of ~10⁹ cm^?2 is also present near the coesite inclusion–host kyanite grain boundaries. Inclusion and matrix kyanite grains with no coesite have dislocation densities of ≤10⁸ cm^?2. Dislocation density is generally reduced during an annealing process, but our results show that not all dislocations in the kyanite have recovered uniformly during exhumation of the UHP rocks. Hence, one of the key factors acting as a buffer to inhibit the coesite to quartz transformation is the mechanical interaction between the host and the inclusion that lead to the formation of dislocations in the kyanite. The kyanite acts as an excellent pressure container that can preserve coesite during the decompression of rocks from UHP conditions. The search for and study of inclusions in kyanite may be a more suitable approach for tracing the spatial distribution of UHP metamorphic rocks.     

Mixing properties of phengitic micas and revised garnet-phengite thermobarometers

Mixing properties for muscovite–celadonite–ferroceladonite solid solutions are derived from combining available experimental phase equilibrium data with tabulated thermodynamic data for mineral end‐members. When a partially ordered solution model is assumed, the enthalpy of mixing among the end‐members muscovite–celadonite–ferroceladonite is nearly ideal, although the Gibbs energies of muscovite–celadonite and muscovite–ferroceladonite solutions are asymmetric due to an asymmetry in the entropy of mixing. Thermodynamic consistency is achieved for data on phengite compositions inassemblages with (a) pyrope+kyanite+quartz/coesite (b) almandine+kyanite+quartz/coesite (c)talc+kyanite+quartz/coesite and (d) garnet–phengite pairs equilibrated both experimentally at high temperatures and natural pairs from low‐grade schists. The muscovite–paragonite solvus has been reanalysed using the asymmetric van Laar model, and the effects of the phengite substitution into muscovite have been quantitatively addressed in order to complete the simple thermodynamic mixing model for the solid solution among the mica end‐members. Results are applied to a natural pyrope–coesite–phengite–talc rock from the Western Alps, and to investigate the conditions under which biotite‐bearing mica schists transform to whiteschist‐like biotite‐absent assemblages for average pelite bulk compositions.     

Constraining peak P–T conditions in UHP eclogites: calculated phase equilibria in kyanite‐ and phengite‐bearing eclogite of the Tromsø Nappe,Norway

Kyanite‐ and phengite‐bearing eclogites have better potential to constrain the peak metamorphic P–T conditions from phase equilibria between garnet + omphacite + kyanite + phengite + quartz/coesite than common, mostly bimineralic (garnet + omphacite) eclogites, as exemplified by this study. Textural relationships, conventional geothermobarometry and thermodynamic modelling have been used to constrain the metamorphic evolution of the Tromsdalstind eclogite from the Tromsø Nappe, one of the biggest exposures of eclogite in the Scandinavian Caledonides. The phase relationships demonstrate that the rock progressively dehydrated, resulting in breakdown of amphibole and zoisite at increasing pressure. The peak‐pressure mineral assemblage was garnet + omphacite + kyanite + phengite + coesite, inferred from polycrystalline quartz included in radially fractured omphacite. This omphacite, with up to 37 mol.% of jadeite and 3% of the Ca‐Eskola component, contains oriented rods of silica composition. Garnet shows higher grossular (X_Grs = 0.25–0.29), but lower pyrope‐content (X_Prp = 0. 37–0.39) in the core than the rim, while phengite contains up to 3.5 Si pfu. The compositional isopleths for garnet core, phengite and omphacite constrain the P–T conditions to 3.2–3.5 GPa and 720–800 °C, in good agreement with the results obtained from conventional geothermobarometry (3.2–3.5 GPa & 730–780 °C). Peak‐pressure assemblage is variably overprinted by symplectites of diopside + plagioclase after omphacite, biotite and plagioclase after phengite, and sapphirine + spinel + corundum + plagioclase after kyanite. Exhumation from ultrahigh‐pressure (UHP) conditions to 1.3–1.5 GPa at 740–770 °C is constrained by the garnet rim (X_Ca^Grt = 0.18–0.21) and symplectite clinopyroxene (X_Na^Cpx = 0.13–0.21), and to 0.5–0.7 GPa at 700–800 °C by sapphirine (X_Mg = 0.86–0.87) and spinel (X_Mg = 0.60–0.62) compositional isopleths. UHP metamorphism in the Tromsø Nappe is more widespread than previously known. Available data suggest that UHP eclogites were uplifted to lower crustal levels rapidly, within a short time interval (452–449 Ma) prior to the Scandian collision between Laurentia and Baltica. The Tromsø Nappe as the highest tectonic unit of the North Norwegian Caledonides is considered to be of Laurentian origin and UHP metamorphism could have resulted from subduction along the Laurentian continental margin. An alternative is that the Tromsø Nappe belonged to a continental margin of Baltica, which had already been subducted before the terminal Scandian collision, and was emplaced as an out‐of‐sequence thrust during the Scandian lateral transport of nappes.     

Superzoned garnets in the coesite-bearing Brossasco-Isasca Unit, Dora-Maira massif, Western Alps, and the origin of the whiteschists

Rare centimeter-sized superzoned garnets (SZGs) were discovered in two coesite-bearing whiteschists of the Brossasco-Isasca Unit (BIU), southern Dora-Maira massif (DMM), Western Alps. The superzoned garnet consists of a reddish-brown almandine core crowded with inclusions of staurolite, chloritoid, kyanite, chlorite and paragonite, and of a pinkish pyrope rim with sporadic inclusions of kyanite, and magnesian chlorite. The core–rim contact is relatively sharp and marks the termination of the inclusion-rich portion. The core composition of the superzoned garnet is almost identical to, or slightly richer in Mg, than that of the rim of porphyroblastic garnet in metapelites from the same unit. In the rim of the superzoned garnet, Mg–Fe ratio increases abruptly towards the outermost rim, whose composition is identical to that of the common pyrope in the whiteschist. At the core–rim boundary, there is no chemical gap. Chloritoid and staurolite are common inclusions in the core of the superzoned garnet in the whiteschist and in the porphyroblastic garnet in the metapelite. The staurolite composition (Si=2.00 and total R²⁺<2.0 for O=23 basis) and its reverse Fe–Mg distribution with respect to garnet suggest a HP origin. The Fe–Mg distribution between chloritoid and garnet is reverse in the superzoned garnet, but normal in the garnet of metapelite. Because normal Fe–Mg distribution was reported from other eclogite-facies metapelites, a model petrogenetic grid was constructed in the FMASH model system considering St, Cld, Ky, Chl, Grt, and assuming the following Fe–Mg partitioning of St>Grt>Cld>Chl. The resulting petrogenetic grid suggests that the core of the superzoned garnet contains incompatible assemblages, such as St–Cld–Chl vs. Cld–Chl–Ky. New and literature data and results of experiments in the KFASH system suggest that: (1) the superzoned garnet was formed under a single prograde high-pressure/ultra high-pressure (HP/UHP) Alpine metamorphism, (2) the almandine inclusion-rich core of the superzoned garnet crystallized at disequilibrium in a pelitic composition system at around 600°C and less than 16 kbar, probably from a former metapelite xenolith included in a Variscan granitoid, and (3) the chemical environment of the host rock suddenly changed from the normal pelite to the whiteschist composition by a metasomatic process during the rim growth, i.e., at a stage close to the UHP climax.