基于海洋溢油溯源数值模拟方法的长岛保护区污染风险分析

渤海海域油气开发和输运活动频繁，溢油风险源较多，无主漂油事件时有发生。本文采用海洋溢油溯源数值模拟方法对山东长岛国家级自然保护区（即长岛保护区）进行了污染风险分析。利用非结构有限体积法海洋模式（Finite-Volume Community Ocean Model,FVCOM）模拟了渤海海域的潮流，结合欧洲中期天气预报中心的ERA5风场资料，通过一次真实溢油事故的后报验证方法的有效性。将该方法应用在长岛保护区的溯源模拟中，评估月平均统计条件下保护区整体污染危害风险。研究表明，溯源数值模拟方法可以提供对保护区造成危害的溢油来源区域及溢油对保护区造成污染影响的概率等信息，可为保护区相关工作提供参考。     

蓬莱19-3 油田事故溢油数值模拟

利用FVCOM(Finite-volume coastal ocean numerical model)数值模型和MM5风场预报模式,在对渤海海域水动力场进行数值模拟的基础上,基于"油粒子"的欧拉-拉格朗日跟踪法和随机走动原理,并考虑风对溢油油膜漂移扩散的直接作用,建立了海洋溢油油膜漂移轨迹和扩散的数值预测模型。利用建立的模型对2011年6月蓬莱19-3油田事故溢油进行了数值模拟,模拟结果与RADARSAT卫星遥感监测数据相吻合。研究结果表明:在渤海中部地区夏季事故溢油模拟预测中,风漂移因子取0.024最为合理,模型可用于渤海蓬莱19-3油田附近事故溢油轨迹和扩散的快速预报,从而为该区域的溢油事故应急响应提供科学依据。     

渤海溢油数值预报研究

以溢油漂移扩散模式为核心,采用"油粒子"方法来模拟溢油在海洋环境中的漂移扩散行为,与业务化渤海三维海洋数值预报模式、中尺度海洋风场数值预报模式相衔接,获得海流、海面风场等海洋环境预报产品作为溢油模式的外强迫,建立了渤海溢油数值预报系统.本文简要介绍了该系统的组成、运行机制和模拟试验情况,并讨论了建立我国全海域溢油预报系统的有关问题.     

区域海上溢油应急处理能力评价研究

文章应用数值模拟方法,针对不同等级溢油事故发生时的油膜飘移扩散轨迹进行模拟研究。同时,根据上海港海域水文气象条件和应急处理措施,选取合理的影响因素,建立区域海上溢油应急处理能力评价指标,并对上海港海域的溢油应急处理能力进行了评价与分析。     

无主漂油源集合预测方法研究

采用基于"拉格朗日"粒子追踪方法的油粒子数值溯源模式,引入天气预报中的"集合预报"方法,考虑气象、海洋环境背景场误差因素,研究无主溢油源的集合预测方法。对某次渤海中西部溢油溯源事件的数值模拟结果表明,溢油源集合预测分析结果与溢油源实际调查情况相符,表明无主漂油源集合预测方法科学、结论可信。     

珠江口溢油数值模拟

对珠江口海域流场进行了数值模拟。考虑风场对海面溢油物理和化学过程的影响,建立了考虑油膜扩展的溢油漂移轨迹数学模型,并对珠江口海域“12.7”溢油事故进行了数值模拟,为较全面了解溢油事故给珠海海域环境带来污染的过程提供了科学依据。     

辽东湾海洋溢油风险区划及防范对策研究

海洋溢油风险区划是海洋溢油风险管理的重要手段,科学合理的风险区划可为预防和减少事故的发生提供管理依据。文章在海洋溢油风险系统研究和溢油污染事故机理分析的基础上,建立了辽东湾海洋溢油风险区划指标体系和风险量化模型,结合GIS空间分析方法,获得了辽东湾海洋溢油风险区划图。在分析辽东湾海洋溢油风险区主导因子和风险特征的基础上,提出了不同风险区的防范对策,为区域海洋溢油风险管理提供了决策依据。     

海上溢油量评估方法研究综述

近年来,国内外海上溢油污染事故的频发,使得全社会对海洋污染的关注不断升温。海上溢油量是评价海上溢油事故威胁程度和确定溢油事故等级的重要指标,也是污染赔偿追责的重要依据,同时对于现场溢油应急处置和科学决策也有重要作用。本文总结分析了目前主要的4种海上溢油量初步评估方法,包括质量平衡法、工艺流程法、现场观测法和数值模拟法。不同溢油量估算方法适用的溢油源和溢油方式各有不同,估算的溢油量也不尽相同。实际应用中,通常根据具体情况选择多种方法进行溢油量综合评估。本文从实际应用出发,探讨几种可用的溢油量评估方法,并结合案例进行说明。     

福宁湾海域溢油扩散影响的数值模拟研究

应用非结构化网格形式的MIKE 21水动力模型及溢油模块建立福宁湾海域海工工程施工期溢油扩散的数学模型,对在静风、全年主导风及不利风等3种不同风况条件下,一个潮周期内包括涨憩、落急、落憩、涨急等4个典型潮时分别发生100 t燃料油持续泄露30 min的事故溢油工况进行溢油扩散数值模拟.分析显示,事故溢油在福宁湾海域的扩散过程主要受潮流和风的影响.计算结果给出了事故溢油发生后24 h内的影响范围及0. 05 mg/dm3油浓度(一类或二类水质标准)溢油最快到达福宁湾内主要敏感目标的时间,为海洋环境影响评价和溢油事故应急措施的制定提供了科学依据.     

海洋溢油生态损害快速预评估模式研究

海洋作为石油资源的主要产地和运输路线,海上溢油事故对海洋生态系统的损害十分巨大.为了评估溢油对海洋生态系统的损害,研制一套海洋溢油生态损害的快速预评估方法和模式非常必要,且对于海洋管理和生态索赔具有重要意义.本文建立了一套适用于渤海海域的海洋溢油生态损害快速预评估模式,该模式将海洋溢油生态损失分为两部分,即海洋环境容量...     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Phylogenetic diversity and phenotypic characterization of cultivable bacterioplankton isolated from polar oceans

A set of 27 marine planktonic bacteria isolated from the polar regions was characterized by 16S rDNA sequencing and physiological and biochemical testing. More than half of these bacteria were positive for caseinase, gelatinase and 13-glucosidase, and could utilize glucose, maltose or malic acid as carbon source for cell growth. Twelve isolates expressed nitrate reduction activities. Except for one antarctic isolate BSwlO175 belonging to Actinobacteria phylum, these isolates were classified as γ-Proteobacteria, suggesting that γ-Proteobacteria dominated in cultivable marine bacterioplankton at both poles. Genus Pseudoalteromonas was the predominant group in the Chukchi Sea and the Bering Sea, and genus ShewaneUa dominated in cultivable bacterioplankton in the Prydz Bay. With sequence similarities above 97%, genus Psychrobacter was found at both poles. These 27 isolates were psychrotolerant, and significant 16S rDNA sequence similarities were found not only between arctic and antarctic marine bacteria （ 〉 99% ）, but also between polar marine bacteria and bacteria from other aquatic environments （ ≥ 98.8% ）, including temperate ocean, deep sea, pond and lake, suggesting that in the polar oceans less temperature-sensitive bacteria may be cosmopolitan and have a bipolar, even global, distribution at the species level.     

Deep-Sea Sediment Compression Curves: Some Controlling Factors, Spurious Overconsolidation, Predictions, and Geophysical Reproduction

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.     

INFORMATION FOR AUTHORS

<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology,     

Estimation of Sediment Properties during Benthic Impact Experiments

Sediment properties, such as water content and density, have been used to estimate the dry and wet weights, as well as the volume of sediment recovered and discharged, during benthic impact experiments conducted in the Pacific and Indian Oceans. The estimates show that the weights of dry (355-1332 t) and wet sediment (1651-4888 t) recovered during the experiments, are not only a function of the total duration and distance covered during the experiment, but also depend on water content and density of the sediment. Estimation of dry sediment and its volumetric ratio in the discharge, are key parameters for calculating the discharged volume. The estimated volume of wet sediment recovered (1427-4049 m 3 ) as well as discharged (2693-6951 m 3 ) during the experiments, provide important inputs to evaluate the sediment resettlement and migration. Using these estimates, the average depth of excavation on the seafloor, can also been calculated. However, the stages of sediment recovery and discharge are expressed differently in some of the experiments. In order to standardize these, different stages have been identified, and definitions of certain terms have been suggested, for use in the future. The methods of calculating different properties, as well as weight and volume of discharged sediment are described in the paper for use in other applications concerning deep-sea discharges.