Large phreatomagmatic vent complex at Coombs Hills, Antarctica: Wet, explosive initiation of flood basalt volcanism in the Ferrar-Karoo LIP

The Mawson Formation and correlatives in the Transantarctic Mountains and South Africa record an early eruption episode related to the onset of Ferrar-Karoo flood basalt volcanism. Mawson Formation rocks at Coombs Hills comprise mainly (≥80% vol) structureless tuff breccia and coarse lapilli tuff cut by irregular dikes and sills, within a large vent complex (>30 km²). Quenched juvenile fragments of generally low but variable vesicularity, accretionary lapilli and country rock clasts within vent-fill, and pyroclastic density current deposits point to explosive interaction of basalt with groundwater in porous country rock and wet vent filling debris. Metre-scale dikes and pods of coherent basalt in places merge imperceptibly into peperite and then into surrounding breccia. Steeply dipping to sub-vertical depositional contacts juxtapose volcaniclastic rocks of contrasting componentry and grainsize. These sub-vertical tuff breccia zones are inferred to have formed when jets of debris + steam + water passed through unconsolidated vent-filling deposits. These jets of debris may have sometimes breached the surface to form subaerial tephra jets which fed subaerial pyroclastic density currents and fall deposits. Others, however, probably died out within vent fill before reaching the surface, allowing mixing and recycling of clasts which never reached the atmosphere. Most of the ejecta that did escape the debris-filled vents was rapidly recycled as vents broadened via lateral quarrying of country rock and bedded pyroclastic vent-rim deposits, which collapsed along the margins into individual vents. The unstratified, poorly sorted deposits comprising most of the complex are capped by tuff, lapilli tuff and tuff breccia beds inferred to have been deposited on the floor of the vent complex by pyroclastic density currents. Development of the extensive Coombs Hills vent-complex involved interaction of large volumes of magma and water. We infer that recycling of water, as well as recycling of pyroclasts, was important in maintaining water supply for phreatomagmatic interactions even when aquifer rock in the vent walls lay far from eruption sites as a consequence of vent-complex widening. The proportion of recycled water increased with vent-complex size in the same way that the proportion of recycled tephra did. Though water recycling leaves no direct rock record, the volcaniclastic deposits within the vent complex show through their lithofacies/structural architecture, lithofacies characteristics, and particle properties clear evidence for extensive and varied recycling of material as the complex evolved. Editorial responsibility: J. Donnelly-Nolan     

The San Venanzo maar and tuff ring,Umbria, Italy: eruptive behaviour of a carbonatite-melilitite volcano

The late Pleistocene San Venanzo maar and nearby Pian di Celle tuff ring in the San Venanzo area of Umbria, central Italy, appear to represent different aspects of an eruptive cycle accompanied by diatreme formation. Approximately 6x10⁶ m³ of mostly lapillisized, juvenile ejecta with lesser amounts of lithics and 1x10⁶ m³ of lava were erupted. The stratigraphy indicates intense explosive activity followed by lava flows and subvolcanic intrusions. The pyroclastic material includes lithic breccia derived from vent and diatreme wall erosion, roughly stratified lapilli tuff deposited by concentrated pyroclastic surge, chaotic scoriaceous pyroclastic flow and inverse graded grain-flow deposits. The key feature of the pyroclastics is the presence of concentric-shelled lapilli generated by accretion around the lithics during magma ascent in the diatreme conduits. The rock types range from kalsilite leucite olivine melilitite lavas and subvolcanic intrusions to carbonatite, phonolite and calcitic melilitite pyroclasts. Juvenile ejecta contain essential calcite whose composition and texture indicate a magmatic origin. Pyroclastic carbonatite activity is also indicated by the presence of carbonatite ash beds. The San Venanzo maar-forming event is believed to have been trigered by fluid-rich carbonatite-phonolite magma. The eruptive centre the moved to the Pian di Celle tuff ring, where the eruption of degassed olivine melilititic magma and late intrusions ended magmatic activity in the area. In both volcanoes the absence of phreatomagmatic features together with the presence of large amounts of primary calcite suggests carbonatite segregation and violent exsolution of CO₂ which, flowing through the diatremes, produced the peculiar intrusive pyroclastic facies and triggered explosions.     

Strombolian and phreatomagmatic deposits of Ohakune craters, Ruapehu, New Zealand: A complex interaction between external water and rising basaltic magma

The Ohakune Craters form one of several parasitic centres surrounding Ruapehu volcano, at the southern end of the Taupo Volcanic Zone. An inner scoria cone and an outer, probably older, tuff ring are the principal structures in a nested cluster of four vents.The scoria cone consists of alternating lava flows and coarse, welded and unwelded, strombolian block and bomb beds. The strombolian beds consist of principally two discrete types of essential clast, vesicular bombs and dense angular blocks. Rare finer-grained beds are unusually block-rich. The tuff ring consists of alternating strombolian and phreatomagmatic units. Strombolian beds have similar grain size characteristics to scoria cone units, but contain more highly vesicular unoxidised bombs and few blocks. Phreatomagmatic deposits, which contain clasts with variable degrees of palagonitisation, consist of less well-sorted airfall deposits and very poorly sorted, crystal-rich pyroclastic surge deposits.Disruption by expanding magmatic gas bubbles was a major but relatively constant influence on both strombolian and phreatomagmatic eruptions at Ohakune. Instead, the nature of deposits was principally controlled by two other variables, vent geometry and the relative influence of external water during volcanism. During tuff-ring construction, magma is considered to have risen rapidly to the surface, and to have been ejected without sufficient residence time in the vent for non-explosive degassing. Availability of external water principally governed the eruption mechanism and hence the nature of the deposits. Essentials clasts of the scoria cone are, by comparison, dense, degassed and oxidised. It is suggested that a change in vent geometry, possibly the construction of the tuff ring itself, permitted lava ponding and degassing during scoria cone growth. During strombolian eruptions, magma remaining in the vent probably became depleted in gas, leading to the formation of an inert zone, or crust, above actively degassing magma. Subsequent explosions had therefore to disrupt both this passive crust and underlying, vesiculating magma “driving” the eruption. Cycles of strombolian eruption are thought to have stopped when the thickness of the inert crust precluded explosive eruption and only recommenced when some of this material was removed, either as a lava flow or during phreatomagmatic explosions when external water entered the vent. Such explosions probably formed the unusually fine-grained and block-rich beds in the strombolian sequence.The Ohakune deposits are an excellent example of the products of explosive eruption of fluid, gas-rich basic magma vesiculating under very near-surface conditions. A complex interplay of rate of magma rise, rate and depth of formation of gas bubbles, vent geometry, abundance of shallow external water, wind velocity and accumulation rate of ejecta determines the nature of deposits of such eruptions.     

Maar-diatreme phreatomagmatism at Hopi Buttes,Navajo Nation (Arizona), USA

Remnants of an extensive maar-diatreme volcanic field are magnificently exposed at various depths of erosion in the Hopi Buttes volcanic field of northeastern Arizona. Field and petrographic studies of both the maar and diatreme elements of a selection of volcanoes within the field show that: (1) lower sections of the maar rim sequences are typically rich in sandy mudrock derived from the pre-eruptive Mio-Pliocene Bidahochi Formation, and the muddy Bidahochi sediment was soft and wet at the time of maar eruptions; (2) beds higher within the rims contain generally increased proportions of sandstone clasts from the Triassic Wingate Formation. In the diatremes, late-emplaced breccia has deeper-seated lithics than more marginal breccia emplaced earlier; and (3) many vents are topped by megacryst-enriched scoria and spatter, and deep-seated xenoliths are known only from upper diatreme and craterfilling tephra. These observations show that: (1) eruptions at Hopi Buttes involved interaction of magma with unconsolidated mudrock at shallow levels, and the phreatomagmatic processes that provided the bulk of the energy involved in the violent eruptions were driven by the interaction of magma and wet sediment; (2) the locus of explosive activity migrated downward as eruptions progressed; and (3) the closing stage of many eruptions was characterized by rapid magma rise and relative depletion of water.     

The geology of split butte — A maar of the south-central snake river plain,Idaho

Split Butte is a volcanic crater of Quaternary age consisting of a tephra ring which at one time retained a lava lake. The tephra is thinly bedded and is composed of partially palagonitized sideromelane clasts and subordinate lithic fragments. The beds typically dip radially away from the center of the crater, but locally dip toward the crater center. The tephra ring resulted from phreatomagmatic eruptions as a result of interaction of groundwater with rising basaltic magma, evidenced by glassy and granulated pyroclastic debris, the presence of abundant palagonite and other secondary minerals, numerous armored lapilli, and plastically deformed ash layers below ejecta blocks. Statistical analysis of the grain size distribution of the ash also indicates a phreatomagmatic origin of Split Butte tephra. In addition, the analysis reveals that the stratigraphically lowest tephra was deposited primarily by pyroclastic flow mechanisms while the upper tephra layers, comprising the bulk of the deposits, were deposited dominantly by airfall and pyroclastic surge. The lava lake and four en echelon basalt dikes were emplaced when phreatomagmatic activity at the vent ceased. Subsequent collapse caused a broad, shallow pit crater to form in the laval lake, and minor spattering occurred at one point along the pit crater scarp. Partial erosion of the tephra, deposition of aeolian sediments and encroachment of the Butte by later lava flows completed the development of Split Butte.     

Averno tuff ring in Campi Flegrei (south Italy)

The tuff ring of Averno (3700 years BP) is a wide maar-type, lake-filled volcano which formed during one of the most recent explosive eruptions inside the Campi Flegrei caldera.The eruptive products consist of (a) a basal coarse unit, intercalated ballistic fallout breccia, subplinian pumice deposits and pyroclastic surge bedsets and (b) an upper fine-grained, stratified, pyroclastic surge sequence.During the deposition of the lower unit both purely magmatic (lapilli breccia) and hydromagmatic episodes (wavy and planar bedded, fine ash pyroclastic surge bedsets) coexisted. The hydromagmatic deposits exhibit both erosive and depositional features. The upper unit mostly comprises fine grained, wet pyroclastic surge deposits. The pyroclastic surges were controlled by a highly irregular pre-existing topography, produced by volcano-tectonic dislocation of older tuff rings and cones.Both the upper and lower units show decreasing depletion of fines with increasing distance from the vent. The ballistic fallout layers, however, exhibit only a weak increase in fines with distance from the vent, in spite of marked fining of the lapilli and blocks. The deposits consist dominantly of moderately to highly vesicular juvenile material, generated by primary magmatic volatile driven fragmentation followed by episodes of near-surface magma-water interaction.The evolution of the eruption toward increased fragmentation and a more hydromagmatic character may reflect that the progressive depletion in magmatic volatiles and a decrease in conduit pressure during the last stage of the eruption, possibly associated with a widening of the vent at sea level.     

Volcanology of the Aries micaceous kimberlite,central Kimberley Basin,Western Australia

The Neoproterozoic (815.4 ± 4.3 Ma) Aries kimberlite intrudes the King Leopold Sandstone and the Carson Volcanics in the central Kimberley Basin, northern Western Australia. Aries is comprised of a N–NNE-trending series of three diatremes and associated hypabyssal kimberlite dykes and plugs. The diatremes are volumetrically dominated by massive, clast-supported, accidental lithic-rich kimberlite breccias that were intruded by hypabyssal macrocrystic phlogopite kimberlite dykes and plugs with variably uniform- to globular segregationary-textured groundmasses. Lower-diatreme facies, accidental lithic-rich breccias probably formed through fall-back of debris into the vent with a major contribution from the collapse of the vent walls. These massive breccias are overlain by a sequence of bedded volcaniclastic breccias in the upper part of the north lobe diatreme. Abundant, poorly vesicular to nonvesicular, juvenile kimberlite ash and lapilli, with morphologies that are indicative of phreatomagmatic fragmentation processes, occur in a reversely graded volcaniclastic kimberlite breccia unit at the base of this sequence. This unit and overlying bedded accidental lithic-rich breccias are interpreted to be sediment gravity-flow deposits (including possible debris flows) derived from the collapse of the crater walls and/or tephra ring deposits that surrounded the crater. Diatreme-forming eruptions may have been initiated by magma–water interactions along fracture and joint-controlled aquifers within the King Leopold Sandstone. The current level of exposure of the diatremes probably extends from the lower-diatreme facies up into the base of a bedded upper-diatreme sequence.     

Root zone processes in the phreatomagmatic pipe emplacement model and consequences for the evolution of maar–diatreme volcanoes

The understanding of processes within the root zone of maar–diatreme volcanoes is important for the interpretation of the geology, volcanology and even hazard assessment of these volcanoes. In the phreatomagmatic model of pipe formation, the irregularly shaped root zone is the site of the phreatomagmatic explosions, and thus functions as the “engine” for pipe formation. In this model the root zone grows over a period of time in a series of many single thermohydraulic, i.e. phreatomagmatic, explosions. The explosions initially occur close to the surface and with ongoing explosive activity penetrate towards deeper levels. The ejection of country rock clasts from the root zone results in a mass deficiency in the root zone that causes the overlying tephra and the adjacent country rocks to subside passively in a sinkhole-like fashion into the root zone. Many phreatomagmatic eruptions consequently result in the formation of a cone-shaped diatreme. Thus with ongoing eruptions the cone-shaped diatreme has to grow systematically both in depth and diameter. During its growth, processes in the lower diatreme levels successively destroy the upper levels of the evolving root zone. At the surface, the maar crater in turn reacts to the underlying subsidence processes and also grows both in depth and diameter.Thermohydraulic explosions, which fragment both magma and the surrounding country rocks, mostly occur within the bottom part of the root zone. Violent explosions in small pipes may clear the overlying diatreme for a short period of time before tephra fall and collapse of the walls of the new crater refill the small initial diatreme. In larger pipes, via expansion of the mixture of highly pressurized water vapor, juvenile gas phases and explosively produced tephra, the confined and expanding eruption cloud has to pierce through the diatreme fill in a feeder conduit in order to erupt. Diatreme-clearing events in large pipes are difficult or impossible to maintain, since the explosive force in the root zone is only in exceptional instances strong enough to lift or entrain the entire diatreme tephra. Knowledge of the genetic relationships between root zones and diatremes is critical to understand pipe growth processes. The combination of such processes can lead to substantial variation in volcanic behavior and thus produce fundamentally different volcano and rock types.It is the purpose of this paper to outline important features of root zones and suggest their significance for the genesis and evolution of maar–diatreme and related volcanoes.     

Subaqueous, basaltic lava dome and carapace breccia on King George Island, South Shetland Islands, Antarctica

 On King George Island during latest Oligocene/earliest Miocene time, submarine eruptions resulted in the emplacement of a small (ca. 500 m estimated original diameter) basalt lava dome at Low Head. The dome contains a central mass of columnar rock enveloped by fractured basalt and basalt breccia. The breccia is crystalline and is a joint-block deposit (lithic orthobreccia) interpreted as an unusually thick dome carapace breccia cogenetic with the columnar rock. It was formed in situ by a combination of intense dilation, fracturing and shattering caused by natural hydrofracturing during initial dome effusion and subsequent endogenous emplacement of further basalt melt, now preserved as the columnar rock. Muddy matrix with dispersed hyaloclastite and microfossils fills fractures and diffuse patches in part of the fractured basalt and breccia lithofacies. The sparse glass-rich clasts formed by cooling-contraction granulation during interaction between chilled basalt crust and surrounding water. Together with muddy sediment, they were injected into the dome by hydrofracturing, local steam fluidisation and likely explosive bulk interaction. The basalt lava was highly crystallised and degassed prior to extrusion. Together with a low effusion temperature and rapid convective heat loss in a submarine setting, these properties significantly affected the magma rheology (increased the viscosity and shear strength) and influenced the final dome-like form of the extrusion. Conversely, high heat retention was favoured by the degassed state of the magma (minimal undercooling), a thick breccia carapace and viscous shear heating, which helped to sustain magmatic (eruption) temperatures and enhanced the mobility of the flow. Received: 1 August 1996 / Accepted: 15 September 1997     

Compositionally diverse magmas erupted close together in space and time within a Karoo flood basalt crater complex

Geochemical data and mapping from a Karoo flood basalt crater complex reveals new information about the ascent and eruption of magma batches during the earliest phases of flood basalt volcanism. Flood basalt eruptions at Sterkspruit, South Africa began with emplacement of thin lava flows before abruptly switching to explosive phreatomagmatic and magmatic activity that formed a nest of craters, spatter and tuff rings and cones that collectively comprise a crater complex >40 km² filled by 9–18 km³ of volcaniclastic debris. Rising magma flux rates combined with reduced access of magma to external water led to effusion of thick Karoo flood basalts, burying the crater-complex beneath the >1.5 km-thick Lesotho lava pile. Geochemical data is consistent with flood basalt effusion from local dikes, and some lava flows likely shared or re-occupied vent sites active during explosive eruptions at Sterkspruit. Flood basalt magmas involved in Sterkspruit eruptions were chemically heterogenous. This study documents the rapid (perhaps simultaneous) eruption of three chemically distinct basaltic magmas which cannot be simply related to one another from one vent site within the Sterkspruit crater complex. Stratigraphic and map relationships indicate that eruption of the same three magma types took place from closely spaced vents over a short time during formation of the bulk of the crater-complex. Two magma types recognized there have not been recognized in the Karoo province before. The variable composition of flood basalts at Sterkspruit argues that magma batches in flood basalt fields may be small (0.5–1 km³) and not simply related to one another. This implies in turn that heterogeneities in the magma source region may be close to each other in time and space, and that eruptions of chemically distinct magmas may take place over short intervals of space and time without significant hybridisation in flood basalt fields.     

On the growth of maars and diatremes and its relevance to the formation of tuff rings

Small and large maars exist associated with small and large diatremes, respectively, their subsurface feeder structures. The problem of size and growth of maar-diatreme volcanoes is discussed from a phreatomagmatic point of view from field data, some geophysical data, and short-lived historic maar eruptions. A hydrostatic pressure barrier of usually about 20–30 bars is assumed to control the maximum depth level of explosive magma/groundwater interactions. Similar to the situation in submarine and subglacial volcanism, initial maar-forming water vapour explosions are therefore assumed to occur at shallow depth and to produce a small maar with a shallow diatreme. Because of limited availability of groundwater and ejection of groundwater in the form of steam, the confining pressure barrier is displaced downward. Consequently, water vapour explosions can take place at consecutively deeper levels with the result that the diatreme penetrates downward and grows in size. Since maars are collapse craters resulting from ejection of wallrocks fragmented by water vapour explosions at the level of the diatreme root zone, downward penetration of a diatreme not only results in increase in size of a diatreme but also in increase in size of the overlying maar. As availability of groundwater in limited amounts controls formation of diatremes and their downward penetration, lack of groundwater enables magma to rise within a diatreme and to form a scoria cone or lava lake within the maar, as is frequently found in volcanic fields such as the Eifel area in Germany. In contrast, availability of large amounts of water in near surface environments such as shallow marine, lake, water-rich coastal plains, or water-rich fluviatile gravel beds prevents formation of maars and deep diatremes but causes formation of tuff rings.     

Shallow-seated controls on styles of explosive basaltic volcanism: a case study from New Zealand

The pyroclastic deposits of many basaltic volcanic centres show abrupt transitions between contrasting eruptive styles, e.g., Hawaiian versus Strombolian, or `dry' magmatic versus `wet' phreatomagmatic. These transitions are controlled dominantly by variations in degassing patterns, magma ascent rates and degrees of interaction with external water. We use Crater Hill, a 29 ka explosive/effusive monogenetic centre in the Auckland volcanic field, New Zealand, as a case study of the transitions between these end-member eruptive styles. The Crater Hill eruption took place from at least 4 vents spaced along a NNE-trending, 600-m-long fissure that is contained entirely within a tuff ring generated during the earliest eruption phases. Early explosive phases at Crater Hill were characterised by eruption from multiple unstable and short-lived vents; later, dominantly extrusive, volcanism took place from a more stable point source. Most of the Crater Hill pyroclastic deposits were formed in 3 phreatomagmatic (P) and 4 `dry' magmatic (M) episodes, forming in turn the outer tuff ring and maar crater (P1, M1, P2) and scoria cone 1 (M2–M4). This activity was followed by formation of a lava shield and scoria cone 2. Purely `wet' activity is represented by the bulk of P1 and P2, and purely `dry' activity by much of M2–M4. However, M1 and parts of M2 and M4 show evidence for simultaneous eruptions of differing style from adjacent vents and rapid variations in the extent and timing of magma:water interaction at each vent. The nature of the wall-rock lithics, and these rapid variations in inferred water/magma ratios imply interaction was occurring mostly at depths of ≤80 m, and the vesicularity patterns in juvenile clasts from these and the P beds imply that rapid degassing occurred at these shallow levels. We suggest that abrupt transitions between eruptive styles, in time and space, at Crater Hill were linked to changes in the local magma supply rate and patterns and vigour of degassing during the final metres of ascent.     

Evolution of tuff ring-dome complex: the case study of Cerro Pinto, eastern Trans-Mexican Volcanic Belt

Cerro Pinto is a Pleistocene rhyolite tuff ring-dome complex located in the eastern Trans-Mexican Volcanic Belt. The complex is composed of four tuff rings and four domes that were emplaced in three eruptive stages marked by changes in vent location and eruptive character. During Stage I, vent clearing produced a 1.5-km-diameter tuff ring that was then followed by emplacement of two domes of approximately 0.2 km³ each. With no apparent hiatus in activity, Stage II began with the explosive formation of a tuff ring ~2 km in diameter adjacent to and north of the earlier ring. Subsequent Stage II eruptions produced two smaller tuff rings within the northern tuff ring as well as a small dome that was mostly destroyed by explosions during its growth. Stage III involved the emplacement of a 0.04 km³ dome within the southern tuff ring. Cerro Pinto’s eruptive history includes sequences that follow simple rhyolite-dome models, in which a pyroclastic phase is followed immediately by effusive dome emplacement. Some aspects of the eruption, however, such as the explosive reactivation of the system and explosive dome destruction, are more complex. These events are commonly associated with polygenetic structures, such as stratovolcanoes or calderas, in which multiple pulses of magma initiate reactivation. A comparison of major and trace element geochemistry with nearby Pleistocene silicic centers does not show indication of any co-genetic relationship, suggesting that Cerro Pinto was produced by a small, isolated magma chamber. The compositional variation of the erupted material at Cerro Pinto is minimal, suggesting that there were not multiple pulses of magma responsible for the complex behavior of the volcano and that the volcanic system was formed in a short time period. The variety of eruptive style observed at Cerro Pinto reflects the influence of quickly exhaustible water sources on a short-lived eruption. The rising magma encountered small amounts of groundwater that initiated eruption phases. Once a critical magma:water ratio was exceeded, the eruptions became dry and sub-plinian to plinian. The primary characteristic of Cerro Pinto is the predominance of fall deposits, suggesting that the level at which rising magma encountered water was deep enough to allow substantial fragmentation after the water source was exhausted. Isolated rhyolite domes are rare and are not currently viewed as prominent volcanic hazards, but the evolution of Cerro Pinto demonstrates that individual domes may have complex cycles, and such complexity must be taken into account when making hazard risk assessments.     

Geology of Tok Island,Korea: eruptive and depositional processes of a shoaling to emergent island volcano

Detailed mapping of Tok Island, located in the middle of the East Sea (Sea of Japan), along with lithofacies analysis and K-Ar age determinations reveal that the island is of early to late Pliocene age and comprises eight rock units: Trachyte I, Unit P-I, Unit P-II, Trachyandesite (2.7±0.1 Ma), Unit P-III, Trachyte II (2.7±0.1 Ma), Trachyte III (2.5±0.1 Ma) and dikes in ascending stratigraphic order. Trachyte I is a mixture of coherent trachytic lavas and breccias that are interpreted to be subaqueous lavas and related hyaloclastites. Unit P-I comprises massive and inversely graded basaltic breccias which resulted from subaerial gain flows and subaqueous debris flows. A basalt clast from the unit, derived from below Trachyte I, has an age of 4.6±0.4 Ma. Unit P-II is composed of graded and stratified lapilli tuffs with the characteristics of proximal pyroclastic surge deposits. The Trachyandesite is a massive subaerial lava ponded in a volcano-tectonic depression, probably a summit crater. A pyroclastic sequence containing flattened scoria clasts (Unit P-III) and a small volume subaerial lava (Trachyte II) occur above the Trachyandesite, suggesting resumption of pyroclastic activity and lava effusion. Afterwards, shallow intrusion of magma occurred, producing Trachyte III and trachyte dikes.The eight rock units provide an example of the changing eruptive and depositional processes and resultant succession of lithofacies as a seamount builds up above sea level to form an island volcano: Trachyte I represents a wholly subaqueous and effusive stage; Units P-I and P-II represent Surtseyan and Taalian eruptive phases during an explosive transitional (subaqueous to emergent) stage; and the other rock units represent later subaerial effusive and explosive stages. Reconstruction of volcano morphology suggests that the island is a remnant of the south-western crater rim of a volcano the vent of which lies several hundred meters to the north-east.     

Eruptive dynamics and caldera collapse during the Onano eruption, Vulsini, Italy

The Onano explosive eruption of the Latera Volcanic Complex (Vulsini Volcanoes, Quaternary potassic Roman Comagmatic Region, Italy) provides an interesting example of multiple changes of eruptive style that were concomitant with a late phase of collapse of the polygenetic Latera Caldera. This paper reports a reconstruction of the event based on field analysis, laboratory studies of grain size and density of juvenile clasts, and re-interpretation of available subsurface geology data. The Onano eruption took place in a structurally weak area, corresponding to a carbonate substrate high bordered by the pre-existing Latera caldera and Bolsena volcano-tectonic depression, which controlled the ascent and eruption of a shoshonitic-phonotephritic magma through intersecting rim fault systems. Temporal changes of magma vesiculation, fragmentation and discharge rate, and consequent eruptive dynamics, were strongly controlled by pressure evolution in the magma chamber and changing vent geometry. Initially, pumice-rich pyroclastic flows were emplaced, followed by spatter- and lithic-rich flows and fallout from energetic fire-fountaining. The decline of magma pressure due to the partial evacuation of the magma chamber induced trapdoor collapse of the chamber roof, which involved part of the pre-existing caldera and external volcano slopes and eventually led to the present-day caldera. The widening of the vent system and the emplacement of the main pyroclastic flow and associated co-ignimbrite lag breccia marked the eruption climax. A sudden drop of the confining pressure, which is attributed to a pseudo-rigid behaviour of the magma chamber wall rocks during a phase of rapid magma drainage, led to extensive magma vesiculation and fragmentation. The disruption of the magma chamber roof and waning magma pressure in the late eruption stage favoured the explosive interaction of residual magma with groundwater from the confined carbonate aquifer. Pulsating hydrostatic and magma pressures produced alternating hydromagmatic pyroclastic surges, strombolian fallout and spatter flows.     

Deep-bedded ultramafic diatremes in the Missouri River Breaks volcanic field,Montana, USA: 1 km of syn-eruptive subsidence

The ultramafic Eocene Missouri River Breaks volcanic field (MRBVF, Montana, USA) includes over 50 diatremes emplaced in a mostly soft substrate. The current erosion level is 1.3–1.5 km below the pre-eruptive surface, exposing the deep part of the diatreme structures and some dikes. Five representative diatremes are described here; they are 200-375 m across and have sub-vertical walls. Their infill consists mostly of 55-90 % bedded pyroclastic rocks (fine tuffs to coarse lapilli tuffs) with concave-upward bedding, and 45–10 % non-bedded pyroclastic rocks (medium lapilli tuffs to tuff breccias). The latter zones form steep columns 15–135 m in horizontal dimension, which cross-cut the bedded pyroclastic rocks. Megablocks of the host sedimentary formations are also present in the diatremes, some being found 1 km or more below their sources. The diatreme infill contains abundant lithic clasts and ash-sized particles, indicating efficient fragmentation of magma and country rocks. The spherical to sub-spherical juvenile clasts are non-vesicular. They are accompanied by minor accretionary lapilli and armored lapilli. The deposits of dilute pyroclastic density currents are locally observed. Our main interpretations are as follows: (1) the observations strongly support phreatomagmatic explosions as the energy source for fragmentation and diatreme excavation; (2) the bedded pyroclastic rocks were deposited on the crater floor, and subsided by 1.0–1.3 km to their current location, with subsidence taking place mostly during the eruption; (3) the observed non-bedded pyroclastic columns were created by debris jets that punched through the bedded pyroclastic material; the debris jets did not empty the mature diatreme, occupying only a fraction of its width, and some debris jets probably did not reach the crater floor; (4) the mature diatreme was nearly always filled and buttressed by pyroclastic debris at depth – there was never a 1.3–1.5-km-deep empty hole with sub-vertical walls, otherwise the soft substrate would have collapsed inward, which it only did near the surface, to create the megablocks. We infer that syn-eruptive subsidence shifted down bedded pyroclastic material and shallow sedimentary megablocks by 0.8–1.1 km or more, after which limited post-eruptive subsidence occurred. This makes the MRBVF diatremes an extreme end-member case of syn-eruptive subsidence in the spectrum of possibilities for maar-diatreme volcanoes worldwide.     

Reconstruction of a kimberlite eruption,using an integrated volcanological,geochemical and numerical approach: A case study of the Fox Kimberlite,NWT, Canada

An integrated approach involving volcanology, geochemistry and numerical modelling has enabled the reconstruction of the volcanic history of the Fox kimberlite pipe. The observed deposits within the vent include a basal massive, poorly sorted, matrix supported, lithic fragment rich, eruption column collapse lapilli tuff. Extensive vent widening during the climactic magmatic phase of the eruption led to overloading of the eruption column with cold dense country rock lithic fragments, dense juvenile pyroclasts and olivine crystals, triggering column collapse. > 40% dilution of the kimberlite by granodiorite country rock lithic fragments is observed both in the physical componentry of the rocks and in the geochemical signature, where enrichment in Al₂O₃ and Na₂O compared to average values for coherent kimberlite is seen. The wide, deep, open vent provided a trap for a significant proportion of the collapsing column material, preventing large scale run-away in the form of pyroclastic flow onto the ground surface, although minor flows probably also occurred. A massive to diffusely bedded, poorly sorted, matrix supported, accretionary-lapilli bearing, lithic fragment rich, lapilli tuff overlies the column collapse deposit providing evidence for a late phreatomagmatic eruption stage, caused by the explosive interaction of external water with residual magma. Correlation of pipe morphology and internal stratigraphy indicate that widening of the pipe occurred during this latter stage and a thick granodiorite cobble-boulder breccia was deposited. Ash- and accretionary lapilli-rich tephra, deposited on the crater rim during the late phreatomagmatic stage, was subsequently resedimented into the vent. Incompatible elements such as Nb are used as indicators of the proportion of the melt fraction, or kimberlite ash, retained or removed by eruptive processes. When compared to average coherent kimberlite the ash-rich deposits exhibit ~ 30% loss of fines whereas the column collapse deposit exhibits ~ 50% loss. This shows that despite the poorly sorted nature of the column collapse deposit significant elutriation has occurred during the eruption, indicating the existence of a high sustained eruption column. The deposits within Fox record a complex eruption sequence showing a transition from a probable violent sub-plinian style eruption, driven by instantaneous exsolution of magmatic volatiles, to a late phreatomagmatic eruption phase. Mass eruption rate and duration of the sub-plinian phase of the eruption have been determined based on the dimensions of milled country-rock boulders found within the intra-vent deposits. Calculations show a short lived eruption of one to eleven days for the sub-plinian magmatic phase, which is similar in duration to small volume basaltic eruptions. This is in general agreement with durations of kimberlite eruptions calculated using entirely different approaches and parameters, such as predictions of magma ascent rates in kimberlite dykes.     

一种特殊的火山作用形式 ——射汽岩浆喷发作用

高温岩浆在上升过程中遇到地下水或地表水发生水岩相互作用,产生大量水蒸汽导致的爆炸式喷发作用,可称为射汽岩浆喷发作用,是一种较为特殊的火山活动,主要产物为低平火山口和基浪堆积物.国内外许多火山学家对射汽岩浆喷发作用的喷发过程和产物开展了岩相学、沉积学、火山物理学和地球化学综合研究,通过实验、计算机模拟等方法探究了射汽岩浆...     

Mixed deposits of simultaneous strombolian and phreatomagmatic volcanism: Rothenberg volcano, east Eifel volcanic field

The Pleistocene basanite-tephrite Rothenberg cone complex in the East Eifel was constructed by alternating dominantly Strombolian (S1–3) and dominantly phreatomagmatic (P1–3) phases of volcanism along a NNE-SSW linear vent system. Strombolian eruptions, from the central vent of the S1 scoria cone, and phreatomagmatic eruptions, from a vent on the southern margin of the cone, occurred simultaneously during the second phreatomagmatic phase (P2). The P2 deposits are a complex sequence in which Strombolian fallout ejecta is intimately admixed with phreatomagmatic fallout and pyroclastic surge material. Every bed contains at least trace amounts of ejecta from both sources but, at every site, an alternation of Strombolian-dominant and phreatomagmatic-dominant units is recorded. Each bed also shows marked lateral changes with a progressive northward increase in the proportion of Strombolian material. The two eruptive styles produced morphologically distinct clast populations often with widely separated (5–7 φ) grain size modes. The phreatomagmatic component of the P2 deposits is inferred to be the result of shallow interaction of external water and cool, partially degassed magma which reached the surface at a time when the magma column was retreating from the northern Strombolian central vent.The Rothenberg deposits illustrate the complexity and sensitivity of controls on Strombolian and associated phreatomagmatic volcanism, and the shallow depth of fragmentation during such eruptions. During such shallow eruptions minor, ephemeral and localised variations in the rate of rise and discharge of magma, and vent geometry and hydrology significantly influence the magma:water ratio and hence eruptive style.     

Miocene lamproite volcanoes in south-eastern Spain—an association of phreatomagmatic and magmatic products

A series of small Miocene (8.3–6.7 Ma) lamproite rock occurrences (as monogenetic volcanoes and/or dykes) cover a large area in southeastern Spain. These rocks are associated with extensional basins filled by Neogene deposits in the Betic and Subbetic structural units. At Cancarix (Sierra de las Cabras), Calasparra, Barqueros, Cerro de Monagrillo, Jumilla, and Vera, eruptions occurred, whereas at Fortuna, Mula and Zeneta there were only small-scale intrusions (mainly dykes). This paper describes volcanic centers at Cancarix, Calasparra and Barqueros, which show initial phreatomagmatic eruptions driven by interaction of rising lamproite magma with groundwater. Tuff ring formed during this volcanic activity. Subsequent activity consisted of dome extrusion in the vent areas of Cancarix and Calasparra and by explosive to effusive magmatic activity accompanied by extensive lava flows at Barqueros.Calasparra and Cancarix are relatively symmetric monogenetic tuff rings filled by late stage massive vertical plug, extruded as degassed crystalline high-viscosity magma along the volcanic conduit. Barqueros was initially a tuff ring, whose late stage Hawaiian-style fountaining generated spatter and clastogenic lavas that built the intra-tuff ring cone of Cabezo del Morron. Finally, extensive lava flows spread from the base of the cone toward the northern part of the edifice. Variations in the tectonic (extensional regime) and local hydrogeologic conditions (shallow aquifers) influenced the occurrence of these lamproite volcanoes. Late stage magma rise was dependent on the magmatic volatile regime, being already degassed at Calasparra and Cancarix, by showing higher viscosity (high crystallization rate) of intra-tuff ring dome extrusions, or still rich in volatiles at Barqueros, displaying lower viscosity lava fountaining and then lava flows.