Modelling of steady‐state fluid flow in 3D fractured isotropic porous media: application to effective permeability calculation

In this paper, 3D steady‐state fluid flow in a porous medium with a large number of intersecting fractures is derived numerically by using collocation method. Fluid flow in the matrix and fractures is described by Darcy's law and Poiseuille's law, respectively. The recent theoretical development presented a general potential solution to model the steady‐state flow in fractured porous media under a far‐field condition. This solution is a hypersingular integral equation with pressure field in the fracture surfaces as the main unknown. The numerical procedure can resolve the problem for any form of fractures and also takes into account the interactions and the intersection between fractures. Once the pressure field and then the flux field in fractures have been determined, the pressure field in the porous matrix is computed completely. The basic problem of a single fracture is investigated, and a semi‐analytical solution is presented. Using the solution obtained for a single fracture, Mori‐Tanaka and self‐consistent schemes are employed for upscaling the effective permeability of 3D fractured porous media. Copyright © 2012 John Wiley & Sons, Ltd.     

Numerical study of two‐phase fluid distributions in fractured porous media

Two‐phase fluid distributions in fractured porous media were studied using a single‐component multiphase (SCMP) lattice Boltzmann method (LBM), which was selected among three commonly used numerical approaches through a comparison against the available results of micro X‐ray computed tomography. The influence of the initial configuration and the periodic boundary conditions in the SCMP LBM for the fluid distribution analysis were investigated as well. It was revealed that regular porous media are sensitive to the initial distribution, whereas irregular porous media are insensitive. Moreover, to eliminate the influence of boundaries, the model's buffer size of an SCMP LBM simulation was suggested to be taken as approximately 12.5 times the average particle size. Then, the two‐phase fluid distribution of a porous medium was numerically studied using the SCMP LBM. Both detailed distribution patterns and macroscopic morphology parameters were reasonably well captured. Finally, the two‐phase fluid distributions in a fractured porous media were investigated. The influence of the degree of saturation, fracture length, and fracture width on the fluid distributions and migration was explored. Copyright © 2015 John Wiley & Sons, Ltd.     

Transverse and longitudinal fluid flow modelling in fractured porous media with non‐matching meshes

A new discrete fracture model is introduced to simulate the steady‐state fluid flow in discontinuous porous media. The formulation uses a multi‐layered approach to capture the effect of both longitudinal and transverse permeability of the discontinuities in the pressure distribution. The formulation allows the independent discretisation of mesh and discontinuities, which do not need to conform. Given that the formulation is developed at the element level, no additional degrees of freedom or special integration procedures are required for coupling the non‐conforming meshes. The proposed model is shown to be reliable regardless of the permeability of the discontinuity being higher or lower than the surrounding domain. Four numerical examples of increasing complexity are solved to demonstrate the efficiency and accuracy of the new technique when compared with results available in the literature. Results show that the proposed method can simulate the fluid pressure distribution in fractured porous media. Furthermore, a sensitivity analysis demonstrated the stability regarding the condition number for wide range values of the coupling parameter.     

采用复合单元法模拟裂隙多孔介质变饱和流动

采用复合单元法建立了模拟裂隙多孔介质变饱和流动的数值模型。该模型具有以下特点:裂隙不需要离散成特定单元,而是根据几何位置插入到孔隙基质单元中形成复合单元;在复合单元中,分别建立裂隙流和孔隙基质流的计算方程,二者通过裂隙-基质界面产生联系并整合成复合单元方程;复合单元方程具有和常规有限单元方程相同的格式,因此,可以使用常规有限单元方程的求解技术。采用欠松弛迭代、集中质量矩阵以及自适应时步调节等技术,开发了裂隙多孔介质变饱和流动计算程序。通过模拟一维干土入渗和复杂裂隙含水层内的流动问题,验证了该模型的合理性和适用性。模拟结果为进一步认识非饱和裂隙含水层地下水流动特性提供了理论依据。     

A finite element method for modeling coupled flow and deformation in porous fractured media

Modeling the flow in highly fractured porous media by finite element method (FEM) has met two difficulties: mesh generation for fractured domains and a rigorous formulation of the flow problem accounting for fracture/matrix, fracture/fracture, and fracture/boundary fluid mass exchanges. Based on the recent theoretical progress for mass balance conditions in multifractured porous bodies, the governing equations for coupled flow and deformation in these bodies are first established in this paper. A weak formulation for this problem is then established allowing to build a FEM. Taking benefit from recent development of mesh‐generating tools for fractured media, this weak formulation has been implemented in a numerical code and applied to some typical problems of hydromechanical coupling in fractured porous media. It is shown that in this way, the FEM that has proved its efficiency to model hydromechanical phenomena in porous media is extended with all its performances (calculation time, couplings, and nonlinearities) to fractured porous media. Copyright © 2015 John Wiley & Sons, Ltd.     

A fracture mapping and extended finite element scheme for coupled deformation and fluid flow in fractured porous media

This paper presents a fracture mapping (FM) approach combined with the extended finite element method (XFEM) to simulate coupled deformation and fluid flow in fractured porous media. Specifically, the method accurately represents the impact of discrete fractures on flow and deformation, although the individual fractures are not part of the finite element mesh. A key feature of FM‐XFEM is its ability to model discontinuities in the domain independently of the computational mesh. The proposed FM approach is a continuum‐based approach that is used to model the flow interaction between the porous matrix and existing fractures via a transfer function. Fracture geometry is defined using the level set method. Therefore, in contrast to the discrete fracture flow model, the fracture representation is not meshed along with the computational domain. Consequently, the method is able to determine the influence of fractures on fluid flow within a fractured domain without the complexity of meshing the fractures within the domain. The XFEM component of the scheme addresses the discontinuous displacement field within elements that are intersected by existing fractures. In XFEM, enrichment functions are added to the standard finite element approximation to adequately resolve discontinuous fields within the simulation domain. Numerical tests illustrate the ability of the method to adequately describe the displacement and fluid pressure fields within a fractured domain at significantly less computational expense than explicitly resolving the fracture within the finite element mesh. Copyright © 2013 John Wiley & Sons, Ltd.     

A mixed solution for two-dimensional unsteady flow in fractured porous media

A mixed finite element–boundary element solution for the analysis of two-dimensional flow in porous media composed of rock blocks and discrete fractures is described. The rock blocks are modelled implicitly by using boundary elements whereas finite elements are adopted to model the discrete fractures. The computational procedure has been implemented in a hybrid code which has been validated first by comparing the numerical results with the closed-form solution for flow in a porous aquifer intercepted by a vertical fracture only. Then, a more complex problem has been solved where a pervious, homogeneous and isotropic matrix containing a net of fractures is considered. The results obtained are shown to describe satisfactorily the main features of the flow problem under study. © 1997 by John Wiley & Sons, Ltd.     

Calculating the internodal transmissibilities using finite analytic method and its application for multi‐phase flow in heterogeneous porous media

In the traditional numerical reservoir simulations, the internodal transmissibility is usually defined as the harmonic mean of the permeabilities of the adjacent grids. This definition underestimates the phase flux and the speed of the saturation front, especially for the strong heterogeneous case. In this article, the internodal transmissibility is recalculated according to the nodal analytic solution. The redefined internodal transmissibility can be used directly to calculate the multiphase flow in the numerical reservoir simulations. Numerical examples show that, compared to the traditional numerical methods, the proposed scheme makes the convergences much faster as the refinement parameter increases, and the accuracy is independent of the heterogeneity. Copyright © 2016 John Wiley & Sons, Ltd.     

模拟裂隙多孔介质中变饱和渗流的广义等效连续体方法

描述了一种计算裂隙多孔介质中变饱和渗流的广义等效连续体方法。这种方法忽略裂隙的毛细作用,设定一个与某孔隙饱和度相对应的综合饱和度极限值,并假定：（1）如果裂隙多孔介质的综合饱和度小于该极限值,水只在孔隙中存在并流动,而裂隙中则没有水的流动;（2）如果综合饱和度等于或大于该极限值,水将进入裂隙,并在裂隙内运动。分析比较了等效连续体模型的不同计算方法,并给出了一个模拟裂隙岩体中变饱和渗流与传热耦合问题的应用算例。结果表明,所述方法具有一般性,可以有效地模拟裂隙多孔介质中变饱和渗流的基本特征。     

Three‐dimensional nonlinear finite element analysis of pile groups in saturated porous media using a new transmitting boundary

The dynamic behaviour of pile groups subjected to an earthquake base shaking is analysed. An analysis is formulated in the time domain and the effects of material nonlinearity of soil, pile–soil–pile kinematic interaction and the superstructure–foundation inertial interaction on seismic response are investigated. Prediction of response of pile group–soil system during a large earthquake requires consideration of various aspects such as the nonlinear and elasto‐plastic behaviour of soil, pore water pressure generation in soil, radiation of energy away from the pile, etc. A fully explicit dynamic finite element scheme is developed for saturated porous media, based on the extension of the original formulation by Biot having solid displacement (u) and relative fluid displacement (w) as primary variables (u–w formulation). All linear relative fluid acceleration terms are included in this formulation. A new three‐dimensional transmitting boundary that was developed in cartesian co‐ordinate system for dynamic response analysis of fluid‐saturated porous media is implemented to avoid wave reflections towards the structure. In contrast to traditional methods, this boundary is able to absorb surface waves as well as body waves. The pile–soil interaction problem is analysed and it is shown that the results from the fully coupled procedure, using the advanced transmitting boundary, compare reasonably well with centrifuge data. Copyright © 2007 John Wiley & Sons, Ltd.     

On the calculation of cumulative strain around full‐flow penetrometers in steady‐state conditions

An approximate solution for the effects of high strain rates, and gradual strength degradation, on the penetration resistance of penetrometers can be obtained by combining the strain‐path method with the classical upper bound theorem. The stream path calculations require the integration of the material constitutive equation along the streamlines. Unless the geometry is simple so that the integration can be evaluated analytically, numerical procedures are required to backtrack streamlines. The strain at any location is calculated by finding the streamline that passes through the given point and integrating the strain rate along that streamline from its inlet boundary. Thus, the calculations can be complicated, and errors can be accumulated during the calculation procedure. This paper presents an efficient approach for evaluating cumulative strains around penetrometers without the need to backtrack individual streamlines. In this approach, the strain components are treated as field variables. The global solution is obtained using the streamline upwind Petrov–Galerkin method. The new method together with an Eulerian‐based finite element formulation was used to study the cone penetration test and evaluate the effect of strain softening on the cone resistance. Copyright © 2014 John Wiley & Sons, Ltd.     

A model for moisture and heat flow in fractured unsaturated porous media

The present study investigates propagation of a cohesive crack in non‐isothermal unsaturated porous medium under mode I conditions. Basic points of skeleton deformation, moisture, and heat transfer for unsaturated porous medium are presented. Boundary conditions on the crack surface that consist of mechanical interaction of the crack and the porous medium, water, and heat flows through the crack are taken into consideration. For spatial discretization, the extended finite element method is used. This method uses enriched shape functions in addition to ordinary shape functions for approximation of displacement, pressure, and temperature fields. The Heaviside step function and the distance function are exploited as enrichment functions for representing the crack surfaces displacement and the discontinuous vertical gradients of the pressure and temperature fields along the crack, respectively. For temporal discretization, backward finite difference scheme is applied. Problems solved from the literature show the validity of the model as well as the dependency of structural response on the material properties and loading. Copyright © 2016 John Wiley & Sons, Ltd.     

Demonstration and application of NMM‐based fractured porous medium flow model

In natural rock masses, the shapes of three‐dimensional (3‐D) blocks cut by arbitrary fracture networks may be very complex. Owing to the geometric complexity and difficulty of mesh discretization of 3‐D blocks and fracture facets, explicit consideration of fracture networks in flow analysis of fractured porous medium (FPM) is very challenging. Using the numerical manifold method based on independent covers (NMMIC), an FPM flow model was proposed that can deal with very complex 3‐D fracture networks. In this paper, the convergence of NMMIC was first demonstrated. The theoretical basis of the arbitrary refinement of computational meshes was proven. Moreover, three peculiarities of NMMIC meshes, that is, arbitrary shape, arbitrary connection, and arbitrary refinement of independent covers, were concluded. Finally, some two‐dimensional (2‐D) tunnel flow examples were analyzed and the numerical results were compared with the analytical results. 3‐D examples with complex fracture distributions were also analyzed. In addition, the computational scale of the developed program was tested by increasing the number of computational elements. The results show that our model can accurately analyze the groundwater flow of rocks surrounding tunnels with complex fracture distributions.     

A pore-scale numerical model for flow through porous media

A pore-scale numerical model based on Smoothed Particle Hydrodynamics (SPH) is described for modelling fluid flow phenomena in porous media. Originally developed for astrophysics applications, SPH is extended to model incompressible flows of low Reynolds number as encountered in groundwater flow systems. In this paper, an overview of SPH is provided and the required modifications for modelling flow through porous media are described, including treatment of viscosity, equation of state, and no-slip boundary conditions. The performance of the model is demonstrated for two-dimensional flow through idealized porous media composed of spatially periodic square and hexagonal arrays of cylinders. The results are in close agreement with solutions obtained using the finite element method and published solutions in the literature. Copyright © 1999 John Wiley & Sons, Ltd.     

Modelling of coupled fluid‐mechanical problems in fractured geological media using enriched finite elements

Geological environments, such as petroleum reservoirs, normally exhibit physical discontinuities, for example, fractures and faults. Because of the reduced thickness of these discontinuities, finite element formulations with strong discontinuity have been applied to the numerical modelling of geological environments. Until now, two relevant characteristics of petroleum reservoirs have not been addressed by these formulations. The first is the pore pressure jump in the direction normal to a discontinuity in a fluid‐mechanical coupling condition, which is present primarily in sealing faults owing to the contrast of permeability with the porous medium. The absence of this jump can affect the prediction of the deformability of a physical discontinuity. Furthermore, reservoir models frequently use coarse meshes. Thus, the method used to evaluate the pore pressure in the discontinuity may exhibit a strong dependence relative to the mesh refinement. Based on these characteristics, in this study, a formulation of an enriched finite element for application to coupled fluid‐mechanical problems with pre‐existing physical discontinuities saturated by a single fluid is presented. The formulation employs discontinuous interpolation functions and enables the reproduction of jumps of displacement and pore pressure associated with a discontinuity inside the element without the need to discretise it. An approximation to estimate the pore pressure in the discontinuity was developed, one which seeks to minimise the influence of refinement. The element's response is verified by comparison with a one‐dimensional analytical solution and simple examples that are simulated using commercial software. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel finite element double porosity model for multiphase flow through deformable fractured porous media

Based on the theory of double-porosity, a novel mathematical model for multiphase fluid flow in a deforming fractured reservoir is developed. The present formulation, consisting of both the equilibrium and continuity equations, accounts for the significant influence of coupling between fluid flow and solid deformation, usually ignored in the reservoir simulation literature. A Galerkin-based finite element method is applied to discretize the governing equations both in the space and time domain. Throughout the derived set of equations the solid displacements as well as the fluid pressure values are considered as the primary unknowns and may be used to determine other reservoir parameters such as stresses, saturations, etc. The final set of equations represents a highly non-linear system as the elements of the coefficient matrices are updated during each iteration in terms of the independent variables. The model is employed to solve a field scale example where the results are compared to those of ten other uncoupled models. The results illustrate a significantly different behaviour for the case of a reservoir where the impact of coupling is also considered. © 1997 by John Wiley & Sons, Ltd.     

Hydro‐mechanical modeling of cohesive crack propagation in multiphase porous media using the extended finite element method

In this paper, a numerical model is developed for the fully coupled hydro‐mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non‐wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two‐phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid skeleton is accounted. The cohesive crack model is integrated into the numerical modeling by means of which the nonlinear fracture processes occurring along the fracture process zone are simulated. The solid phase displacement, the wetting phase pressure and the capillary pressure are taken as the primary variables of the three‐phase formulation. The other variables are incorporated into the model via the experimentally determined functions, which specify the relationship between the hydraulic properties of the fracturing porous medium, that is saturation, permeability and capillary pressure. The spatial discretization is implemented by employing the extended finite element method, and the time domain discretization is performed using the generalized Newmark scheme to derive the final system of fully coupled nonlinear equations of the hydro‐mechanical problem. It is illustrated that by allowing for the interaction between various processes, that is the solid skeleton deformation, the wetting and the non‐wetting pore fluid flow and the cohesive crack propagation, the effect of the presence of the geomechanical discontinuity can be completely captured. Copyright © 2012 John Wiley & Sons, Ltd.     

Weak discontinuity in porous media: an enriched EFG method for fully coupled layered porous media

In this paper, a series of multimaterial benchmark problems in saturated and partially saturated two‐phase and three‐phase deforming porous media are addressed. To solve the process of fluid flow in partially saturated porous media, a fully coupled three‐phase formulation is developed on the basis of available experimental relations for updating saturation and permeabilities during the analysis. The well‐known element free Galerkin mesh‐free method is adopted. The partition of unity property of MLS shape functions allows for the field variables to be extrinsically enriched by appropriate functions that introduce existing discontinuities in the solution field. Enrichment of the main unknowns including solid displacement, water phase pressure, and gas phase pressure are accounted for, and a suitable enrichment strategy for different discontinuity types are discussed. In the case of weak discontinuity, the enrichment technique previously used by Krongauz and Belytschko [Int. J. Numer. Meth. Engng., 1998; 41:1215–1233] is selected. As these functions possess discontinuity in their first derivatives, they can be used for modeling material interfaces, generating only minor oscillations in derivative fields (strain and pressure gradients for multiphase porous media), as opposed to unenriched and constrained mesh‐free methods. Different problems of multimaterial poro‐elasticity including fully saturated, partially saturated one, and two‐phase flows under the assumption of fully coupled extended formulation of Biot are examined. As a further development, problems involved with both material interface and impermeable discontinuities, where no fluid exchange is permitted across the discontinuity, are considered and numerically discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Adaptive isogeometric finite element analysis of steady‐state groundwater flow

Numerical challenges occur in the simulation of groundwater flow problems because of complex boundary conditions, varying material properties, presence of sources or sinks in the flow domain, or a combination of these. In this paper, we apply adaptive isogeometric finite element analysis using locally refined (LR) B‐splines to address these types of problems. The fundamentals behind isogeometric analysis and LR B‐splines are briefly presented. Galerkin's method is applied to the standard weak formulation of the governing equation to derive the linear system of equations. A posteriori error estimates are calculated to identify which B‐splines should be locally refined. The error estimates are calculated based on recovery of the L₂‐projected solution. The adaptive analysis method is first illustrated by performing simulation of benchmark problems with analytical solutions. Numerical applications to two‐dimensional groundwater flow problems are then presented. The problems studied are flow around an impervious corner, flow around a cutoff wall, and flow in a heterogeneous medium. The convergence rates obtained with adaptive analysis using local refinement were, in general, observed to be of optimal order in contrast to simulations with uniform refinement. Copyright © 2015 John Wiley & Sons, Ltd.     

多孔介质油水两相k~s~p关系数学模型的实验研究

数学模型是研究相对渗透率与饱和度关系曲线的重要方法。采用自行开发设计的人工平面多孔介质模型,测定了相对渗透率与饱和度的关系曲线。多孔介质选择粒径为0.5~1mm、1~2mm的标准砂,纯净的水为湿润相,用3号苏丹红染色的93#汽油为非湿润相,组成多孔介质油水两相流动系统。采用Van Genuchten and Mualeum(VGM)和Brooks-Corey-Burdine(BCB)两种数学模型计算相对渗透率与饱和度的关系曲线,通过比较两种数学模型计算结果之间和模型计算结果与实测结果的差异以及模型的应用、多相渗流系统自身特征,得出VGM、BCB两种数学模型计算结果符合实际情况,VGM模型应用过程更为简便,但VGM模型具有一定适用条件;在砂性多孔介质中,BCB模型计算相对渗透率与饱和度关系曲线更准确。