Tectonically induced climate and its control on the distribution of depositional systems in a continental foreland basin, Cloverly and Lakota Formations (Lower Cretaceous) of Wyoming, U.S.A.

Continental sediments of the Cloverly and Lakota Formations (Lower Cretaceous) in Wyoming are subdivided into three depositional systems: perennial to intermittent alluvial, intermittent to ephemeral alluvial, and playa. Chert-bearing sandstones, conglomerates, carbonaceous mudrocks, blocky mudrocks, and skeletal limestones were deposited by perennial to intermittent alluvial systems. Carbonaceous mudrocks contain abundant wood fragments, cuticle and cortical debris, and other vascular plant remains representing deposition in oxbow lakes, abandoned channels, and on floodplains under humid to seasonal conditions. Intraformational conglomerates, sandstones, bioturbated and blocky mudrocks with caliche nodules, and bioturbated limestones characterize deposition in intermittent to ephemeral alluvial systems. Bioturbated limestones are encased in bioturbated mudrocks with abundant pseudo-slickensides. The presence of caliche nodules in some of the blocky to bioturbated mudrocks is consistent with supersaturation and precipitation of calcium carbonate from groundwater under semi-arid conditions. Caliche nodules, pseudo-slickensides, and carbonate-rich floodplain sediments are interpreted to have been deposited by intermittent to ephemeral alluvial systems under seasonal to semi-arid climatic conditions. Laminated mudrocks, siltstones, vuggy carbonates, bedded to nodular evaporites, pebbly mudrocks, and diamictites were deposited in evaporative alkaline lakes or playas. Pebbly mudrocks and diamictites are interpreted to represent deposition from channelized and unchannelized hyperconcentrated flows on a playa, resulting from intense rain events within the basin.The areal abundance and distribution of these depositional systems change systematically across the overfilled portion of the Early Cretaceous Cordilleran foreland basin in Wyoming. The lower part (A-interval) of the Cloverly and Lakota Formations is characterized by deposits of perennial to intermittent rivers that existed 300 to 1000 km east of the Sevier fold-and-thrust belt. Proximal to the Sevier fold-and-thrust belt, the A-interval of the Cloverly Formation and upper Ephraim Formation of the Gannett Group are typified by deposits of intermittent to ephemeral rivers and their associated floodplains. In the middle part (B-interval) of the Cloverly Formation, intermittent to ephemeral alluvial systems expand to 600 km into the basin. The upper part (C-interval) of the Cloverly Formation is characterized by playa deposits in the Bighorn and Wind River Basins and intermittent to ephemeral alluvial deposits along the front of the ancestral Sevier Mountains. Deposits of perennial to intermittent alluvial systems in the C-interval of the Cloverly and Lakota Formations are restricted to the Black Hills region, almost 900 km to the east of the Sevier Mountains. The change in the areal distribution of depositional systems through time within this continental foreland basin may be attributed to the development of a rain shadow associated with the uplift of the Sevier Mountains in the Early Cretaceous.     

Eocene fan delta-submarine fan deposition in the Wagwater Trough, east-central Jamaica

ABSTRACT The Wagwater Trough is a fault-bounded basin which cuts across east-central Jamaica. The basin formed during the late Palaeocene or early Eocene and the earliest sediments deposited in the trough were the Wagwater and Richmond formations of the Wagwater Group. These formations are composed of up to 7000 m of conglomerates, sandstones, and shales. Six facies have been recognized in the Wagwater Group: Facies I-unfossiliferous massive conglomerates; Facies II—channelized, non-marine conglomerates, sandstones, and shales; Facies III-interbedded, fossiliferous conglomerates and sandstones; Facies IV—fossiliferous muddy conglomerates; Facies V—channelized, marine conglomerates, sandstones, and shales; and Facies VI—thin-bedded sheet sandstones and shales. The Wagwater and Richmond formations are interpreted as fan delta-submarine fan deposits. Facies associations suggest that humid-region fan deltas prograded into the basin from the adjacent highlands and discharged very coarse sediments on to a steep submarine slope. At the coast waves reworked the braided-fluvial deposits of the subaerial fan delta into coarse sand and gravel beaches. Sediments deposited on the delta-front slope were frequently remobilized and moved downslope as slumps, debris flows, and turbidity currents. At the slope-basin break submarine fans were deposited. The submarine fans are characterized by coarse inner and mid-fan deposits which grade laterally into thin bedded turbidites of the outer fan and basin floor.     

四川会理—会东及邻区中元古界昆阳群沉积特征及演化

四川会理 会东及邻区中元古界昆阳群 ,由下而上可分为力马河组、凤山营组和天宝山组 ,与古元古界河口群为不整合接触 ,其代表年龄值为 1 70 0± 1 0 0Ma～ 1 2 0 0± 1 0 0Ma。对这套地层的沉积学研究 ,前人涉及甚少。笔者在野外考察和室内分析的基础上 ,对其沉积相和沉积环境进行了详细的研究。初步认为研究区的中元古界昆阳群可分为 7种沉积相 ,进而探讨了该区的沉积演化历史。     

贵州平坝白垩纪地层及沉积特征

通过对平坝一带区域地质的调查,认为这套白垩系砾岩、紫红色泥岩为山麓—河湖相沉积,是燕山期构造控制的山前盆地沉积。在紫红色泥岩中首次发现介形类Ｔａｌｉｃｙｐｒｉｄｅａｓｐ．、Ｔ．ｌａ－ｔｉｏｖａｔａ、Ｃｙｐｒｉｓｓｐ．,证明其属上白垩统扎佐组,而不是侏罗系。根据沉积学研究将其划分为４种沉积类型,并圈定了各类型空间展布。砾岩,砂岩属碎屑流沉积产物,而紫红色泥岩为湖相沉积,两者在很大程度上属同时异相沉积。     

Alluvial fan–lacustrine association in the fault tip end of a half-graben, northern Triassic Cuyo basin, western Argentina

The Triassic deposits of Cerro Puntudo in the San Juan province of western Argentina constitute the northernmost exposures of the northern portion of the nonmarine Cuyo rift basin, also known as the Las Peñas-Tamberías half-graben. The local column, with an exposed thickness of approximately 400 m, consists of abundant basal and topmost coarse alluvial fan conglomerates and breccias (facies associations I and II) and a relatively thin (approximately 50 m) intervening sequence of marginal, shallow lacustrine deposits characterized by stromatolitic (domal) limestones, tuffaceous mudstones, and fine-grained sandstones (facies association III). Subaerial exposure in the lacustrine deposits is evidenced by desiccation cracks and brecciation. A very thin (0–6 m), laterally, discontinuous succession of lacustrine deposits with similar characteristics is interbedded with the basal conglomerates. Laterally, this lacustrine interval was eroded by overlying conglomerates. The basal conglomerates commonly show crude normal grading, faint cross-bedding, and b-axis clast imbrication. The predominance of coarse deposits and paleocurrents from NW to SE, indicative of an axial flow pattern, suggest that these exposures correspond to the northern end of the Cuyo basin, which is characterized by a shallow, alluvial fan-encased, carbonate-rich lake margin. This lacustrine interval can be correlated with the thicker lacustrine section exposed to the south at Quebrada del Tigre and Ciénaga Larga along the border fault margin of a nonmarine half-graben. The correlation with these sections suggests that the Cerro Puntudo lacustrine deposits are the shallowest equivalent of more profundal, organic-rich lacustrine sediments exposed in the deepest segment of the border fault margin. These thickness and facies variations are the result of differential subsidence along the border fault margin between the low accommodation, fault tip end represented by the Cerro Puntudo section and the high accommodation, central segment located to the south.     

The geologic history of the passive margin off new england and the canadian maritime provinces

The geologic history of the passive continental margin off the east coast of North America from New England to Newfoundland is described using all available geological and geophysical information. “Rift” and “drift” phases of the margin's evolution are recognized, with rifting initiated in Late Triassic and completed by Early Jurassic. The plate decoupling process created a complex block-faulted terrain as a result of uplift and tensional fracturing. The approximate plane of continental separation is marked by a “hinge zone” characterized by a pronounced steepening of basement gradients. Since the Early Jurassic, the margin has undergone continual subsidence in response to cooling and sediment loading. This “drift” sequence attains its maximum thickness in the vicinity of the continental slope and thins both landward and seaward. On the shelf, this unit consists of Mesozoic evaporites, carbonates, and deltaic deposits. Overlying these sediments is a prograding wedge of Cenozoic elastics. On the rise, the Mesozoic sediments are evaporites, hemipelagic limestones and shales and carbonaceous clays. The Cenozoic is dominantly terrigenous material. Separating these two sedimentary provinces is the continental slope, a site of major facies changes and a Mesozoic reef complex.     

Storm-influenced siliciclastic and carbonate ramp deposits, the Lower Ordovician Dumugol Formation, South Korea

The Dumugol Formation (Lower Ordovician) in the southern part of the Baegunsan syncline, South Korea, contains mixed siliciclastic and carbonate ramp deposits. The ramp sediments were frequently influenced by storm events resulting in tempestites of sandstone-mudstone couplets, bioclastic grainstones to packstones, flat-pebble conglomerates, a skeletal lag layer and laminated calcisiltites. All tempestites are characterized by an erosive to sharp base, poor grading and a transitional upper boundary. The difference in lithology of tempestites appears to have been controlled by the nature of substrates and by proximality. For example, laminated calcisiltites have developed on the shallow carbonate ramp, flat-pebble conglomerates are closely associated with nodular limestones on shallow and deep ramps, and thin skeletal lag layers from fossiliferous argillaceous sediments formed in a basinal setting. The stratigraphic succession of the Dumugol Formation represents an initial transgression followed by a regression. The vertical facies change records the transition from a shallow siliciclastic ramp to a deep carbonate ramp, to a basin, shallowing to a deep carbonate ramp, and to a shallow carbonate ramp. Storm effects are mostly well preserved in shallow to deep ramp deposits.     

Diagenetic paths in the margin of a Triassic Basin: NW zone of the Iberian Chain, Spain

Buntsandstein deposits generated in a slowly subsiding basin on the western margin of the Iberian Chain are represented by a stratigraphic succession of fluvial deposits less than 100 m thick (conglomerates, sandstones, and shales). Diagenetic processes in sandstones can be grouped as eodiagenetic, mesodiagenetic, and telodiagenetic. Eodiagenesis can be associated with Muschelkalk, Keuper, and probably early Jurassic times. Mesodiagenesis is probably related to Jurassic times. Diagenetic chemical reactions suggest a maximum burial less than 1.5 km and low temperatures (<120°C). Patterns of porosity reduction by compaction and cementation suggest four diagenetic stages: (1) Loss of primary porosity by early mechanical compaction; (2) early cementation (K-feldspar and dolomite); (3) dissolution of cements; and (4) framework collapse by re-compaction. These stages are manifested by the presence of two types of sandstone. Type I sandstones present high intergranular volume (mean, 30%). Type II sandstones are characterized by high compactional porosity loss and exhibit low values of intergranular volume (mean, 16.9%). Type II sandstones are associated with the dissolution of cement and later re-compaction of type I sandstones. An intermediate telodiagenetic phase is deduced and related to the sharp unconformity between Lower Cretaceous sediments and the underlying sediments. This suggests that a mechanically unstable framework collapsed during the Cretaceous, generating type II sandstones. The analyzed diagenetic paths have a wide applicability on similar marginal areas of rift basins.     

Devonian to Triassic Successions of the Changning-Menglian Belt, Western Yunnan, China

Phanerozoic strata are distributed in several north-south trending zones in the central part of the Changning-Menglian Belt. Four types of Devonian to Triassic stratigraphic successions can be identified: (1) elastics with limestone lenses in the mid-section, changing up-section into alternations of fine elastics and cherts; (2) elastics with chert intercalations and limestone lenses, and topped by Permian basic volcanics; (3) elastics-basic volcanics-carbonates-clastics; and (4) limestones, dolomitic limestones-dark gray thin-bedded limestones, argillaceous limestones, mudstones and siliceous mudstones. Devonian to Triassic cherts occur in different horizons and different zones from east to west. These cherts are usually transitional to their neighboring elastics. There is no continuous Devonian to Middle Triassic chert sequence in the central zone of the Changning-Menglian Belt as Liu et al. (1991,1993) reported. Volcanics and the overlying carbonates described by some workers as "seamount" sequences     

豫西太原组、山西组中潮道沉积的类型和特征

豫西太原组中的潮道为陆表海滨岸潮道类型,其特点为:向上变细的层序,冲刷切割下伏的灰岩层,具大型板状、槽状交错层理和双向交错层理,潮道曲流砂坝发育。山西组下段的潮道为障壁后潮道,位于障壁砂坝后的潮坪区;潮道砂岩泥质杂基较高,正粒序,砂体自海向陆分叉尖灭;潮坪、潮道等亚环境组合影响了其上发育的煤层的厚度变化。山西组上段的潮道为下三角洲平原潮道类型,多位于分流河口,砂岩为正粒序,双(单)粘土层和潮汐周期层序发育。     

Allogenic and autogenic controls on facies and stratigraphic architecture of the Lower Jurassic Mashabba Formation,Gebel Al-Maghara,North Sinai,Egypt

The Lower Jurassic Mashabba Formation crops out in the core of the doubly plunging Al-Maghara anticline, North Sinai, Egypt. It represents a marine to terrestrial succession deposited within a rift basin associated with the opening of the Neotethys. Despite being one of the best and the only exposed Lower Jurassic strata in Egypt, its sedimentological and sequence stratigraphic framework has not been addressed yet. The formation is subdivided informally into a lower and upper member with different depositional settings and sequence stratigraphic framework. The sedimentary facies of the lower member include shallow-marine, fluvial, tidal flat and incised valley fill deposits. In contrast, the upper member consists of strata with limited lateral extension including fossiliferous lagoonal limestones alternating with burrowed deltaic sandstones. The lower member contains three incomplete sequences (SQ1-SQ3). The depositional framework shows transgressive middle shoreface to offshore transition deposits sharply overlain by forced regressive upper shoreface sandstones (SQ1), lowstand fluvial to transgressive tidal flat and shallow subtidal sandy limestones (SQ2), and lowstand to transgressive incised valley fills and shallow subtidal sandy limestones (SQ3). In contrast, the upper member consists of eight coarsening-up depositional cycles bounded by marine flooding surfaces. The cycles are classified as carbonate-dominated, siliciclastic-dominated, and mixed siliciclastic-carbonate. The strata record rapid changes in accommodation space. The unpredictable facies stacking pattern, the remarkable rapid facies changes, and chaotic stratigraphic architecture suggest an interplay between allogenic and autogenic processes. Particularly syndepositional tectonic pulses and occasional eustatic sea-level changes controlled the rate and trends of accommodation space, the shoreline morphology, the amount and direction of siliciclastic sediment input and rapid switching and abandonment of delta systems.     

Carboniferous calcretes in the Canadian Arctic

Calcrete palaeosols have been found in the Upper Carboniferous Canyon Fiord Formation of southwestern Ellesmere Island, Canadian Arctic. These calcretes were developed in fluvial and shallow marine sediments that accumulated within two adjacent subbasins, in which the tectono-sedimentary environment led to the deposition of five different sedimentary facies: (i) floodbasin sandstones; (ii) alluvial fan sandstones; (iii) alluvial fan conglomerates; (iv) braided fluvial sandstones; and (v) shallow marine limestones. Nodular/massive palaeosol profiles, consisting of cryptic, nodular, massive and laminar horizons, occur within the floodbasin sandstone and alluvial fan sandstone facies. Plugged palaeosol profiles, consisting of cryptic, plugged and laminar horizons, are restricted to the alluvial fan conglomerate facies. Massive/brecciated palaeosol profiles, consisting of cryptic, massive/brecciated and laminar horizons, occur essentially within the shallow marine limestone facies. The relationships between calcrete profiles and sedimentary facies suggest that profile types were controlled mainly by the texture and composition of the parent material: nodular/massive profiles are restricted to silicate-rich sandstone hosts, plugged profiles are restricted to carbonate-rich conglomerate hosts and massive/brecciated profiles are restricted to limestone hosts. Important relationships also exist between the maturity levels of nodular/massive profiles and sedimentary facies: profiles are generally mature in the floodbasin sandstones, invariably immature in the alluvial fan sandstones and absent from the braided fluvial sandstones. These different maturity levels were probably controlled mainly by exposure time, vegetation and substrate composition.     

塔里木盆地西南地区白垩系沉积相特征

塔西南白垩系发育,可分为上、下两统。下白垩统克孜勒苏群可分4段,多以陆相沉积为主,富含棕红色砂砾岩夹少许砂岩、粉砂岩、泥岩和砾岩。上白垩统英吉沙群为海陆相并存,库克拜组可分2段,常见泥岩、膏岩和海相化石;乌依塔格组多为红色泥岩、泥质粉砂岩夹砂岩;依格孜牙组多见灰岩、白云质灰岩,富含海相化石;吐依洛克组为棕红色泥岩、石膏和砂、砾岩,含海相化石。通过勾勒9个岩性单元的沉积相展布,分析昆仑山前白垩纪的沉积环境演化过程。克孜勒苏群西区多为陆相快速堆积,东区远离陆源为三角洲和滨岸沉积,具有宽泛的冲积扇—辫状河三角洲相分布。库克拜组总体显示为辫状河三角洲—潮坪相变的过程;乌依塔格组以潮坪为主;依格孜牙组表现为碳酸盐岩台地—台地边缘的演化;吐依洛克组为宽广潮坪。     

赵凹油田安棚区核三下段的沉积模式

在对赵凹油田安棚深层系核（核桃园组）三下段砂体的研究中，从岩性特征，结构和成分成熟,沉只构造及古生物特征等方面总经了该区沉积的相标志，结合研究区的沉积背景，笔者认为该区沉积环境为扇三角洲相，并进一步划分了亚相和同相，提出了研究区扇三角洲相的沉积模式，并对扇三角洲砂体的类型进行了研究。该区发育扇三角洲前缘亚相和前扇三角洲两种亚相，近岸水道和远岸水道微相比较发育；距离物源较近，沉积物搬运距离短，沉积物粒度较粗，结构成熟度和成分成熟度较低，水动力较强，在砾岩和粗砂岩中发育有块状层理，平行层理和交错层理，砂体类型对储集层物性有明显的控制作用。     

Architecture and development of the alluvial sediments of the Upper Jurassic Tordillo Formation in the Cañada Ancha Valley, northern Neuquén Basin, Argentina

The Upper Jurassic Tordillo Formation at Cañada Ancha area, northern Neuquén Basin, Argentina, comprises a multi-stage suit of predominantly alluvial sediments that is heterolithic in nature. In that suit, several lithofacies, architectural elements, and bounding surfaces of different order have been identified and their lateral and vertical distribution characterized. This analysis allowed the differentiation of 3 main units (lower, middle and upper), 20 subunits (C-1 to C-20), and the characterization of their alluvial styles.The lower unit (which comprises subunits C-1 to C-4) is mainly formed by fine- to medium-grained sandstones, which become medium- to coarse-grained towards the top. These sandstones characterize settings ranging from floodplains with isolated, unconfined flows, to more complex, vertically stacked, multi-storey sheet sandstones of braided fluvial systems. The middle unit (C-5 to C-10) is dominated by pale brown-grey fine-to coarse-grained sands and medium size subangular to angular conglomerates, which reflect amalgamated complexes of sandstone sheets and downstream accretion macroforms. Remarkably, this alluvial sedimentation was episodically punctuated by volcaniclastic flows. The upper unit (C-11 to C-20) consists of finer sediments, mainly pink to white fine-to medium grained sandstones and red to green siltstones. Towards the top, bioturbation becomes important, and also the presence of volcanosedimentary flows is noticeable. Fluvial settings include braided sheet sandstones with waning flood deposits evolving to isolated high-sinuosity fluvial systems, with flash flood deposits. At the top of this unit, facies may suggest marine influence.Vertical changes in the fluvial style result from both climatic and tectonic controls. A semiarid to arid climate and the active tectonism linked to the eastward migration of the Andean volcanic arc determined major bounding surfaces, fluvial style evolution and the presence of the volcano-sedimentary deposits. Different stages of high and low subsidence rates has been deduced from the vertical stacking of sediments.     

Alluvial fan and lacustrine sediments from the Stephanian A and B (La Magdalena, Ciñera—Matallana and Sabero) coalfields, northern Spain

Vertical sequence analysis within 1500-2500 m thick coarse-grained coalfield successions allows six sedimentary associations to be distinguished. These are interpreted in terms of depositional environments on, or related to alluvial fans which fringed a fault bounded source region. (i) Topographic valley and fanhead canyon fills: occurring at the bases of the coalfield successions and comprising sporadically reddened, scree, conglomeratic thinning and fining upward sequences, and fine-grained coal-bearing sediments. (ii) Alluvial fan channels: conglomerate and sandstone filled. (iii) Mid-fan conglomeratic and sandstone lobes: laterally extensive, thickly bedded (1-25 m) and varying from structureless coarse conglomerates and pebbly sandstones, to stratified fine conglomerates and cross-bedded sandstones. (iv) Interlobe and interchannel: siltstones, fine-grained sheet sandstones, abundant floras, thin coals and upright trees. (v) Distal fan: 10 cm-1.5 m thick sheet sandstones which preserve numerous upright trees, separated by silt-stones and mudstones with abundant floras, and coal seams. The sheet sandstones and normally arranged in sequences of beds which become thicker and coarser or thinner and finer upwards. These trends also occur in combination. (vi) Lacustrine: coals, limestones, and fine-grained, low-energy, regressive, coarsening upward sequences. Proximal fan sediments are only preserved in certain basal deposits of these coalfields. The majority of the successions comprise mid and distal alluvial fan and lacustrine sediments. Mid-fan depositional processes consisted of debris flows and turbulent streamflows, whilst sheetfloods dominated active distal areas. A tropical and seasonal climate allowed vegetation to colonize abandoned fan surfaces and perhaps resulted in localized diagenetic reddening. Worked coals, from 10s cm-20 m thick, occur in the distal fan and lacustrine environments. These alluvial fan deposits infill‘California-like’basins developed and preserved along major structural zones. In many of their characteristics, in particular the occurrence of thinning and fining, and thickening and coarsening upward sequences and megasequences, these sediments have similarities to documented ancient submarine fan deposits.     

The Silurian geology of Gotland, Sweden

Gotland is an island in the central Baltic, long recognized as the most outstanding outcrop of Silurian shallow-water marine sediments in the world. These represent deposition in tropical environments in an epeiric sea on the small continent of Baltica. The sediments are interbedded limestones and shales with subordinate sandstones and are developed as a carbonate platform on the underlying Precambrian, Cambrian and Ordovician. Particularly spectacular are reef deposits, rich in stromatoporoid sponges, which occur throughout the Gotland sequence. The sequence is almost undisturbed and provides an excellent field laboratoy to study a variety of Silurian facies.     

Aeolian stratification and facies association in desert sediments, Arran basin (Permian), Scotland

ABSTRACT Permian aeolian sediments on the island of Arran are divisible into dune (including draa) and interdune deposits. Both types display a distinctive and unusually wide variation in grain size. The dominant features of the dune deposits are grainfall lamination, sandflow lamination, and inverse graded lamination associated with ripple-form lamination and normal graded lamination. The flat-lying aeolian interdune deposits are characterised by granule and sand ripples, horizontal lamination in coarse sand and granules, plane bed lamination and inverse graded lamination. Associated structures include ripple-form lamination and deflation lags. Three types of trace fossil associated with completely bioturbated horizons occur in some low-angle dune and interdune deposits.
The aeolian facies interfinger with alluvial fan deposits giving rise to three recognizable facies belts. Marginal aeolian deposits are associated with fluvial conglomerates and are dominated by interdune deposits and occasionally very thin barchan deposits (set height 3-37 cm). Intermediate aeolian deposits are characterized by interbedded crescentic dune, small draa (dune set height 5 cm-4.5 m) and interdune deposits, and rare fluvial and lake sediments. Basinal aeolian deposits are dominated by draa deposits (dune set height 0.2-28 m) associated with rare interdune sediments. Transverse dunes and draas were moved by north-eastern palaeowinds towards the foot of the alluvial fans. The aeolian sediments were deposited in a fault-bounded desert basin.