Ground motion simulations for the 23 October 2011 Van,Eastern Turkey earthquake using stochastic finite fault approach

The 23 October 2011 Van (Mw 7.1) earthquake that occurred in Eastern Turkey resulted in heavy damage particularly in the city of Van and town of Ercis. This paper presents ground motion simulations of Van earthquake by using stochastic finite fault method (EXSIM, Motazedian and Atkinson in Bull Seismol Soc Am 95:995–1010, 2005; Boore in Bull Seismol Soc Am 99:3202–3216, 2009) that provides a simple and effective tool to generate high frequency strong motion. The input parameters related to source, path, and site effects are calibrated on the basis of minimizing the error functions between simulations and observations both in time and frequency domain. Validated model parameters are used to produce synthetics in regional extent with the aim of understanding the level and distribution of the ground shaking particularly in the near fault region where no recordings are available within the 40 km of the epicenter. This paper evaluates the effect of two different slip models on ground motion intensity measures over the area of interest and addresses the variability in the near fault region associated with the source effect. The synthetics are compared with the corresponding estimations of ground motion prediction equations by Boore and Atkinson (Earthq Spectra 24:99–138, 2008), Akkar and Bommer (Seismol Res Lett 81:195–206, 2010) and Akkar and Cagnan (Bull Seismol Soc Am 100:2978–2995, 2010). Our results indicate that despite the limitation of the method for incorporating the directivity effect and inadequate representation of the soil conditions at the individual stations, a satisfactory match between synthetics and observations are obtained both in time and frequency domain. Spatial distributions of the synthetics in regional level also show reasonable correlation with ground motion prediction equations and damage observations.     

Real-time risk assessment in seismic early warning and rapid response: a feasibility study in Bishkek (Kyrgyzstan)

Earthquake early warning systems (EEWS) are considered to be an effective, pragmatic, and viable tool for seismic risk reduction in cities. While standard EEWS approaches focus on the real-time estimation of an earthquake’s location and magnitude, innovative developments in EEWS include the capacity for the rapid assessment of damage. Clearly, for all public authorities that are engaged in coordinating emergency activities during and soon after earthquakes, real-time information about the potential damage distribution within a city is invaluable. In this work, we present a first attempt to design an early warning and rapid response procedure for real-time risk assessment. In particular, the procedure uses typical real-time information (i.e., P-wave arrival times and early waveforms) derived from a regional seismic network for locating and evaluating the size of an earthquake, information which in turn is exploited for extracting a risk map representing the potential distribution of damage from a dataset of predicted scenarios compiled for the target city. A feasibility study of the procedure is presented for the city of Bishkek, the capital of Kyrgyzstan, which is surrounded by the Kyrgyz seismic network by mimicking the ground motion associated with two historical events that occurred close to Bishkek, namely the 1911 Kemin (M?=?8.2; ±0.2) and the 1885 Belovodsk (M?=?6.9; ±0.5) earthquakes. Various methodologies from previous studies were considered when planning the implementation of the early warning and rapid response procedure for real-time risk assessment: the Satriano et al. (Bull Seismol Soc Am 98(3):1482–1494, 2008) approach to real-time earthquake location; the Caprio et al. (Geophys Res Lett 38:L02301, 2011) approach for estimating moment magnitude in real time; the EXSIM method for ground motion simulation (Motazedian and Atkinson, Bull Seismol Soc Am 95:995–1010, 2005); the Sokolov (Earthquake Spectra 161: 679–694, 2002) approach for estimating intensity from Fourier amplitude spectra; and the Tyagunov et al. (Nat Hazard Earth Syst Sci 6:573–586, 2006) approach for risk computation. Innovatively, all these methods are jointly applied to assess in real time the seismic risk of a particular target site, namely the city of Bishkek. Finally, the site amplification and vulnerability datasets considered in the proposed methodology are taken from previous studies, i.e., Parolai et al. (Bull Seismol Soc Am, 2010) and Bindi et al. (Soil Dyn Earthq Eng, 2011), respectively.     

Fourier spectral- and duration models for the generation of response spectra adjustable to different source-, propagation-, and site conditions

One of the major challenges related with the current practice in seismic hazard studies is the adjustment of empirical ground motion prediction equations (GMPEs) to different seismological environments. We believe that the key to accommodating differences in regional seismological attributes of a ground motion model lies in the Fourier spectrum. In the present study, we attempt to explore a new approach for the development of response spectral GMPEs, which is fully consistent with linear system theory when it comes to adjustment issues. This approach consists of developing empirical prediction equations for Fourier spectra and for a particular duration estimate of ground motion which is tuned to optimize the fit between response spectra obtained through the random vibration theory framework and the classical way. The presented analysis for the development of GMPEs is performed on the recently compiled reference database for seismic ground motion in Europe (RESORCE-2012). Although, the main motivation for the presented approach is the adjustability and the use of the corresponding model to generate data driven host-to-target conversions, even as a standalone response spectral model it compares reasonably well with the GMPEs of Ambraseys et al. (Bull Earthq Eng 3:1–53, 2005), Akkar and Bommer (Seismol Res Lett 81(2):195–206, 2010) and Akkar and Cagnan (Bull Seismol Soc Am 100(6):2978–2995, 2010).     

Ground motion estimation in Delhi from postulated regional and local earthquakes

Ground motions are estimated at 55 sites in Delhi, the capital of India from four postulated earthquakes (three regional M _w?=?7.5, 8.0, and 8.5 and one local). The procedure consists of (1) synthesis of ground motion at a hard reference site (NDI) and (2) estimation of ground motion at other sites in the city via known transfer functions and application of the random vibration theory. This work provides a more extensive coverage than earlier studies (e.g., Singh et al., Bull Seism Soc Am 92:555–569, 2002; Bansal et al., J Seismol 13:89–105, 2009). The Indian code response spectra corresponding to Delhi (zone IV) are found to be conservative at hard soil sites for all postulated earthquakes but found to be deficient for M _w?=?8.0 and 8.5 earthquakes at soft soil sites. Spectral acceleration maps at four different natural periods are strongly influenced by the shallow geological and soil conditions. Three pockets of high acceleration values are seen. These pockets seem to coincide with the contacts of (a) Aravalli quartzite and recent Yamuna alluvium (towards the East), (b) Aravalli quartzite and older quaternary alluvium (towards the South), and (c) older quaternary alluvium and recent Yamuna alluvium (towards the North).     

Compatible ground-motion prediction equations for damping scaling factors and vertical-to-horizontal spectral amplitude ratios for the broader Europe region

In a companion article Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4, 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) present a new ground-motion prediction equation (GMPE) for estimating 5 %-damped horizontal pseudo-acceleration spectral (PSA) ordinates for shallow active crustal regions in Europe and the Middle East. This study provides a supplementary viscous damping model to modify 5 %-damped horizontal spectral ordinates of Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) for damping ratios ranging from 1 to 50 %. The paper also presents another damping model for scaling 5 %-damped vertical spectral ordinates that can be estimated from the vertical-to-horizontal (V/H) spectral ratio GMPE that is also developed within the context of this study. For consistency in engineering applications, the horizontal and vertical damping models cover the same damping ratios as noted above. The article concludes by introducing period-dependent correlation coefficients to compute horizontal and vertical conditional mean spectra (Baker in J Struct Eng 137:322–331, 2011). The applicability range of the presented models is the same as of the horizontal GMPE proposed by Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b): as for spectral periods $0.01 \hbox { s}\le \,\hbox {T}\le \,4\hbox { s}$ as well as PGA and PGV for V/H model; and in terms of seismological estimator parameters $4\le \hbox {M}_\mathrm{w} \le 8, \hbox { R} \le 200 \hbox { km}, 150\hbox { m/s}\le \hbox { V}_\mathrm{S30}\le $ 1,200 m/s, for reverse, normal and strike-slip faults. The source-to-site distance measures that can be used in the computations are epicentral $(\hbox {R}_\mathrm{epi})$ , hypocentral $(\hbox {R}_\mathrm{hyp})$ and Joyner–Boore $(\hbox {R}_\mathrm{JB})$ distances. The implementation of the proposed GMPEs will facilitate site-specific adjustments of the spectral amplitudes predicted from probabilistic seismic hazard assessment in Europe and the Middle East region. They can also help expressing the site-specific design ground motion in several formats. The consistency of the proposed models together with the Akkar et al. (Bull Earthq Eng, doi:10.1007/s10518-013-9461-4 2013a; Bull Earthq Eng, doi:10.1007/s10518-013-9508-6, 2013b) GMPE may be advantageous for future modifications in the ground-motion definition in Eurocode 8 (CEN in Eurocode 8, Design of structures for earthquake resistance—part 1: general rules, seismic actions and rules for buildings. European Standard NF EN 1998-1, Brussels, 2004).     

New Seismic Noise Models Obtained Using Very Broadband Stations

It has been two decades since the last comprehensive standard model of ambient earth noise was published Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993). The PETERSON model was updated by analyzing the absolute quietest conditions for stations within the GSN (Berger et al. in J Geophys Res 109, 2005; Mcnamara and Buland in Bull Seism Soc Am 94:1517–1527, 2004; Ringler et al. in Seismol Res Lett 81(4) doi:10.1785/gssrl.81.4.605, 2010). Unfortunately, both the original model and the updated models did not include any deployed station in North Africa and Middle East, which reflects the noise levels within the desert environment of those regions. In this study, a survey was conducted to create a new seismic noise model from very broadband stations which recently deployed in North Africa. For this purpose, 1 year of continuous recording of seismic noise data of the Egyptian National Seismic Network (ENSN) was analyzed in order to create a new noise model. Seasonal and diurnal variations in noise spectra were recorded at each station. Moreover, we constructed a new noise model for each individual station. Finally, we obtained a new cumulative noise model for all the stations. We compared the new high-noise model (EHNM) and new low-noise model (ELNM) with both the high-noise model (NHNM) and low-noise model (NLNM) of Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993). The obtained noise levels are considerably lower than low-noise model of Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993) at ultra long period band (ULP band), but they are still below the high-noise model of Peterson (Observations and modelling of seismic background noise, US Geological Survey, open-file report 93–322, 1993). The results of this study could be considered as a first step to create permanent seismic noise models for North Africa and Middle East regions.     

Empirical equations for the prediction of PGA and pseudo spectral accelerations using Iranian strong-motion data

A recently compiled, comprehensive, and good-quality strong-motion database of the Iranian earthquakes has been used to develop local empirical equations for the prediction of peak ground acceleration (PGA) and 5%-damped pseudo-spectral accelerations (PSA) up to 4.0 s. The equations account for style of faulting and four site classes and use the horizontal distance from the surface projection of the rupture plane as a distance measure. The model predicts the geometric mean of horizontal components and the vertical-to-horizontal ratio. A total of 1551 free-field acceleration time histories recorded at distances of up to 200 km from 200 shallow earthquakes (depth < 30 km) with moment magnitudes ranging from M_w 4.0 to 7.3 are used to perform regression analysis using the random effects algorithm of Abrahamson and Youngs (Bull Seism Soc Am 82:505–510, 1992), which considers between-events as well as within-events errors. Due to the limited data used in the development of previous Iranian ground motion prediction equations (GMPEs) and strong trade-offs between different terms of GMPEs, it is likely that the previously determined models might have less precision on their coefficients in comparison to the current study. The richer database of the current study allows improving on prior works by considering additional variables that could not previously be adequately constrained. Here, a functional form used by Boore and Atkinson (Earthquake Spect 24:99–138, 2008) and Bindi et al. (Bull Seism Soc Am 9:1899–1920, 2011) has been adopted that allows accounting for the saturation of ground motions at close distances. A regression has been also performed for the V/H in order to retrieve vertical components by scaling horizontal spectra. In order to take into account epistemic uncertainty, the new model can be used along with other appropriate GMPEs through a logic tree framework for seismic hazard assessment in Iran and Middle East region.     

Locations and magnitudes of earthquakes in Central Asia from seismic intensity data

We apply the Bakun and Wentworth (Bull Seism Soc Am 87:1502–1521, 1997) method to determine the location and magnitude of earthquakes occurred in Central Asia using MSK-64 intensity assignments. The attenuation model previously derived and validated by Bindi et al. (Geophys J Int, 2013) is used to analyse 21 earthquakes that occurred over the period 1885–1964, and the estimated locations and magnitudes are compared to values available in literature. Bootstrap analyses are performed to estimate the confidence intervals of the intensity magnitudes, as well as to quantify the location uncertainty. The analyses of seven significant earthquakes for the hazard assessment are presented in detail, including three large historical earthquakes that struck the northern Tien-Shan between the end of the nineteenth and the beginning of the twentieth centuries: the 1887, M 7.3 Verny, the 1889, M 8.3 Chilik and the 1911, M 8.2 Kemin earthquakes. Regarding the 1911, Kemin earthquake the magnitude values estimated from intensity data are lower (i.e. MI_LH?=?7.8 and MI_W?=?7.6 considering surface wave and moment magnitude, respectively) than the value M?=?8.2 listed in the considered catalog. These values are more in agreement with the value M _S?=?7.8 revised by Abe and Noguchi (Phys Earth Planet In, 33:1–11, 1983b) for the surface wave magnitude. For the Kemin earthquake, the distribution of the bootstrap solutions for the intensity centre reveal two minima, indicating that the distribution of intensity assignments do not constrain a unique solution. This is in agreement with the complex source rupture history of the Kemin earthquake, which involved several fault segments with different strike orientations, dipping angles and focal mechanisms (e.g. Delvaux et al. in Russ Geol Geophys 42:1167–1177, 2001; Arrowsmith et al. in Eos Trans Am Geophys Union 86(52), 2005). Two possible locations for the intensity centre are obtained. The first is located on the easternmost sub-faults (i.e. the Aksu and Chon-Aksu segments), where most of the seismic moment was released (Arrowsmith et al. in Eos Trans Am Geophys Union 86(52), 2005). The second location is located on the westernmost sub-faults (i.e. the Dzhil'-Aryk segment), close to the intensity centre location obtained for the 1938, M 6.9 Chu-Kemin earthquake (MI_LH?=?6.9 and MI_W?=?6.8).     

\tau_p^{{\rm max}} magnitude estimation, the case of the April 6, 2009 L’Aquila earthquake

Rapid magnitude estimate procedures represent a crucial part of proposed earthquake early warning systems. Most of these estimates are focused on the first part of the P-wave train, the earlier and less destructive part of the ground motion that follows an earthquake. Allen and Kanamori (Science 300:786–789, 2003) proposed to use the predominant period of the P-wave to determine the magnitude of a large earthquake at local distance and Olivieri et al. (Bull Seismol Soc Am 185:74–81, 2008) calibrated a specific relation for the Italian region. The Mw 6.3 earthquake hit Central Italy on April 6, 2009 and the largest aftershocks provide a useful dataset to validate the proposed relation and discuss the risks connected to the extrapolation of magnitude relations with a poor dataset of large earthquake waveforms. A large discrepancy between local magnitude (ML) estimated by means of $\tau_p^{{\rm max}}$ evaluation and standard ML (6.8 ± 1.5 vs. 5.9 ± 0.4) suggests using caution when ML vs. $\tau_p^{{\rm max}}$ calibrations do not include a relevant dataset of large earthquakes. Effects from large residuals could be mitigated or removed introducing selection rules on τ _p function, by regionalizing the ML vs. $\tau_p^{{\rm max}}$ function in the presence of significant tectonic or geological heterogeneity, and using probabilistic and evolutionary methods.     

Empirical ground-motion models for point- and extended-source crustal earthquake scenarios in Europe and the Middle East

This article presents the latest generation of ground-motion models for the prediction of elastic response (pseudo-) spectral accelerations, as well as peak ground acceleration and velocity, derived using pan-European databases. The models present a number of novelties with respect to previous generations of models (Ambraseys et al. in Earthq Eng Struct Dyn 25:371–400, 1996, Bull Earthq Eng 3:1–53, 2005; Bommer et al. in Bull Earthq Eng 1:171–203, 2003; Akkar and Bommer in Seismol Res Lett 81:195–206, 2010), namely: inclusion of a nonlinear site amplification function that is a function of $\text{ V }_\mathrm{S30}$ and reference peak ground acceleration on rock; extension of the magnitude range of applicability of the model down to $\text{ M }_\mathrm{w}$ 4; extension of the distance range of applicability out to 200 km; extension to shorter and longer periods (down to 0.01 s and up to 4 s); and consistent models for both point-source (epicentral, $\text{ R }_\mathrm{epi}$ , and hypocentral distance, $\text{ R }_\mathrm{hyp}$ ) and finite-fault (distance to the surface projection of the rupture, $\text{ R }_\mathrm{JB}$ ) distance metrics. In addition, data from more than 1.5 times as many earthquakes, compared to previous pan-European models, have been used, leading to regressions based on approximately twice as many records in total. The metadata of these records have been carefully compiled and reappraised in recent European projects. These improvements lead to more robust ground-motion prediction equations than have previously been published for shallow (focal depths less than 30 km) crustal earthquakes in Europe and the Middle East. We conclude with suggestions for the application of the equations to seismic hazard assessments in Europe and the Middle East within a logic-tree framework to capture epistemic uncertainty.     

An Evaluation of Earthquake Hazard Potential for Different Regions in Western Anatolia Using the Historical and Instrumental Earthquake Data

We applied the maximum likelihood method produced by Kijko and Sellevoll (Bull Seismol Soc Am 79:645–654, 1989; Bull Seismol Soc Am 82:120–134, 1992) to study the spatial distributions of seismicity and earthquake hazard parameters for the different regions in western Anatolia (WA). Since the historical earthquake data are very important for examining regional earthquake hazard parameters, a procedure that allows the use of either historical or instrumental data, or even a combination of the two has been applied in this study. By using this method, we estimated the earthquake hazard parameters, which include the maximum regional magnitude $ \hat{M}_{\max } , $ the activity rate of seismic events and the well-known $ \hat{b} $ value, which is the slope of the frequency-magnitude Gutenberg-Richter relationship. The whole examined area is divided into 15 different seismic regions based on their tectonic and seismotectonic regimes. The probabilities, return periods of earthquakes with a magnitude M?≥?m and the relative earthquake hazard level (defined as the index K) are also evaluated for each seismic region. Each of the computed earthquake hazard parameters is mapped on the different seismic regions to represent regional variation of these parameters. Furthermore, the investigated regions are classified into different seismic hazard level groups considering the K index. According to these maps and the classification of seismic hazard, the most seismically active regions in WA are 1, 8, 10 and 12 related to the Alia?a Fault and the Büyük Menderes Graben, Aegean Arc and Aegean Islands.     

The 2014 Earthquake Model of the Middle East: ground motion model and uncertainties

We summarize the main elements of a ground-motion model, as built in three-year effort within the Earthquake Model of the Middle East (EMME) project. Together with the earthquake source, the ground-motion models are used for a probabilistic seismic hazard assessment (PSHA) of a region covering eleven countries: Afghanistan, Armenia, Azerbaijan, Cyprus, Georgia, Iran, Jordan, Lebanon, Pakistan, Syria and Turkey. Given the wide variety of ground-motion predictive models, selecting the appropriate ones for modeling the intrinsic epistemic uncertainty can be challenging. In this respect, we provide a strategy for ground-motion model selection based on data-driven testing and sensitivity analysis. Our testing procedure highlights the models of good performance in terms of both data-driven and non-data-driven testing criteria. The former aims at measuring the match between the ground-motion data and the prediction of each model, whereas the latter aims at identification of discrepancies between the models. The selected set of ground models were directly used in the sensitivity analyses that eventually led to decisions on the final logic tree structure. The strategy described in great details hereafter was successfully applied to shallow active crustal regions, and the final logic tree consists of four models (Akkar and Ça?nan in Bull Seismol Soc Am 100:2978–2995, 2010; Akkar et al. in Bull Earthquake Eng 12(1):359–387, 2014; Chiou and Youngs in Earthq Spectra 24:173–215, 2008; Zhao et al. in Bull Seismol Soc Am 96:898–913, 2006). For other tectonic provinces in the considered region (i.e., subduction), we adopted the predictive models selected within the 2013 Euro-Mediterranean Seismic Hazard Model (Woessner et al. in Bull Earthq Eng 13(12):3553–3596, 2015). Finally, we believe that the framework of selecting and building a regional ground-motion model represents a step forward in ground-motion modeling, particularly for large-scale PSHA models.     

Scaling Transition in Earthquake Sources: A Possible Link Between Seismic and Laboratory Measurements

We estimate the corner frequencies of 20 crustal seismic events from mainshock–aftershock sequences in different tectonic environments (mainshocks 5.7 < M _W < 7.6) using the well-established seismic coda ratio technique (Mayeda et al. in Geophys Res Lett 34:L11303, 2007; Mayeda and Malagnini in Geophys Res Lett, 2010), which provides optimal stability and does not require path or site corrections. For each sequence, we assumed the Brune source model and estimated all the events’ corner frequencies and associated apparent stresses following the MDAC spectral formulation of Walter and Taylor (A revised magnitude and distance amplitude correction (MDAC2) procedure for regional seismic discriminants, 2001), which allows for the possibility of non-self-similar source scaling. Within each sequence, we observe a systematic deviation from the self-similar \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - 3} \) line, all data being rather compatible with \( M_{0} \propto \mathop f\nolimits_{\text{c}}^{ - (3 + \varepsilon )} \) , where ε > 0 (Kanamori and Rivera in Bull Seismol Soc Am 94:314–319, 2004). The deviation from a strict self-similar behavior within each earthquake sequence of our collection is indicated by a systematic increase in the estimated average static stress drop and apparent stress with increasing seismic moment (moment magnitude). Our favored physical interpretation for the increased apparent stress with earthquake size is a progressive frictional weakening for increasing seismic slip, in agreement with recent results obtained in laboratory experiments performed on state-of-the-art apparatuses at slip rates of the order of 1 m/s or larger. At smaller magnitudes (M _W < 5.5), the overall data set is characterized by a variability in apparent stress of almost three orders of magnitude, mostly from the scatter observed in strike-slip sequences. Larger events (M _W > 5.5) show much less variability: about one order of magnitude. It appears that the apparent stress (and static stress drop) does not grow indefinitely at larger magnitudes: for example, in the case of the Chi–Chi sequence (the best sampled sequence between M _W 5 and 6.5), some roughly constant stress parameters characterize earthquakes larger than M _W ~ 5.5. A representative fault slip for M _W 5.5 is a few tens of centimeters (e.g., Ide and Takeo in J Geophys Res 102:27379–27391, 1997), which corresponds to the slip amount at which effective lubrication is observed, according to recent laboratory friction experiments performed at seismic slip velocities (V ~ 1 m/s) and normal stresses representative of crustal depths (Di Toro et al. in Nature in press, 2011, and references therein). If the observed deviation from self-similar scaling is explained in terms of an asymptotic increase in apparent stress (Malagnini et al. in Pure Appl Geophys, 2014, this volume), which is directly related to dynamic stress drop on the fault, one interpretation is that for a seismic slip of a few tens of centimeters (M _W ~ 5.5) or larger, a fully lubricated frictional state may be asymptotically approached.     

An evaluation of 3-D velocity models of the Kanto basin for long-period ground motion simulations

We performed three-dimensional (3-D) finite difference simulations of long-period ground motions (2–10 s) in the Kanto basin using the Japan Seismic Hazard Information Station (J-SHIS 2009), Yamada and Yamanaka (Exploration Geophysics 65(3):139–150, 2012) (YY), and Head Quarter for Earthquake Research Promotion (HERP 2012) velocity models for two intermediate depth (68–80 km) moderate earthquakes (Mw 5.8–5.9), which occurred beneath the Kanto basin. The models primarily differ in the basic data set used in the construction of the velocity models. The J-SHIS and HERP models are the results of integration of mainly geological, geophysical, and earthquake data. On the other hand, the YY model is oriented towards the microtremor-array-observation data. We obtained a goodness of fit between the observed and synthetic data based on three parameters, peak ground velocities (PGVs), smoothed Fourier spectra (FFT), and cross-correlations, using an algorithm proposed by Olsen and Mayhew (Seism Res Lett 81:715–723, 2010). We found that the three models reproduced the PGVs and FFT satisfactorily at most sites. However, the models performed poorly in terms of cross-correlations especially at the basin edges. We found that the synthetics using the YY model overestimate the observed waveforms at several sites located in the areas having V _s 0.3 km/s in the top layer; on the other hand, the J-SHIS and HERP models explain the waveforms better at the sites and perform similarly at most sites. We also found that the J-SHIS and HERP models consist of thick sediments beneath some sites, where the YY model is preferable. Thus, we have concluded that the models require revisions for the reliable prediction of long-period ground motions from future large earthquakes.     

Empirical ground-motion relations using moderate earthquakes recorded by Medellín–Aburrá Valley (Colombia) strong-motion networks

We tested attenuation relations obtained for different regions of the world to verify their suitability to predict strong-motion data recorded by Medellín and Aburrá Valley Accelerographic Networks. We used as comparison criteria, the average of the difference between the observed and the predicted data as a function of epicenter distance and its standard deviation. We also used the approach developed by Sherbaum et al. (Bull Seism Soc Am 94:2164–2185, 2004) that provides a method to evaluate the overall goodness-of-fit of ground-motion prediction equations. The predictive models selected use a generic focal depth. We found that this parameter has an important influence in the ground-motion predictions and must be taken into account as an independent variable. We also found important to characterize the local soil amplification to improve the attenuation relations. We found empirical relations for peak horizontal acceleration PGA and velocity PGV based on the Kamiyama and Yanagisawa (Soils Found 26:16–32, 1986) approach. $$\begin{aligned} \log _{10} (PGA)=0.5886M_L -1.0902\log _{10}(R)-0.0035H+C_{st}\pm 0.\text{29} \end{aligned}$$ $$\begin{aligned} \log _{10} (PGV)=0.7255M_L -1.8812\log _{10}(R)-0.0016H+C_{st}\pm 0.36 \end{aligned}$$ where PGA is measured in cm/s $^{2}$ and PGV in cm/s, $M_{L}$ is local magnitude in the range 2.8–6.5, $R$ is epicentral distance up to 290 km, $H$ is focal depth in km and $C_{st}$ is a coefficient that accounts for the site response due to soil conditions of each recording station. The introduction of focal depth and local site conditions as independent variables, minimize the residuals and the dispersion of the predicted data. We conclude that $H$ and $C_{st}$ are sensitive parameters, having a strong influence on the strong-motion predictions. Using the same functional form, we also propose an empirical relation for the root mean square acceleration a $_\mathrm{rms}$ : $$\begin{aligned} \log _{10} \left( {a_{rms} } \right)=0.4797M_L -1.1665\log _{10} (R)-0.00201H+C_{st}\pm 0.40 \end{aligned}$$ where a $_\mathrm{rms}$ is measured in cm/s $^{2}$ , from the S-wave arrival and using a window length equal to the rupture duration. The other variables are the same as those for PGA and PGV. The site correction coefficients $C_{st}$ found for PGA, PGV and a $_\mathrm{rms}$ show a similar trend indicating a good correlation with the soil conditions of the recording sites.     

Velocity and Attenuation Structure of the Tibetan Lithosphere Under the Hi-CLIMB Array From the Modeling of Pn Attributes

Using seismic data from regional earthquakes in Tibet recorded by the Hi-CLIMB experiment, Pn attributes are used to constrain the velocity gradient and attenuation structure of the Tibetan lithosphere under the Hi-CLIMB array. Numerical modeling is performed using the spectral-element method (SEM) for laterally varying upper-mantle velocity and attenuation, and the seismic attributes considered include the Pn travel-time, envelope amplitude, and pulse frequency. The results from the SEM modeling provide two alternative models for the upper-mantle beneath the Hi-CLIMB array in Tibet. The first model is derived from the 3D velocity model of Griffin et al. (Bull Seism Soc Am 101:1938–1947, 2011) with a constant upper-mantle velocity gradient, and laterally varying upper mantle attenuation. The second model has a laterally varying upper-mantle velocity gradient, and constant upper-mantle attenuation. In both cases, the Qiangtang terrane is distinguished from the Lhasa terrane by a change in Moho depth and upper-mantle velocities. The lower upper-mantle velocities, as well as higher Pn attenuation, suggest hotter temperatures beneath the Qiangtang terrane as compared to the Lhasa terrane. Although the fits to the Pn amplitude and pulse frequency data are comparable between the two models, the first model with the constant upper-mantle velocity gradient fits the travel times somewhat better in relation to the data errors.     

Seismic Source Characteristics of Nuclear and Chemical Explosions in Granite from Hydrodynamic Simulations

Seismic source characteristics of low-yield (0.5–5 kt) underground explosions are inferred from hydrodynamic simulations using a granite material model on high-performance (parallel) computers. We use a non-linear rheological model for granite calibrated to historical near-field nuclear test data. Equivalent elastic P-wave source spectra are derived from the simulated hydrodynamic response using reduced velocity potentials. Source spectra and parameters are compared with the models of Mueller and Murphy (Bull Seism Soc Am 61:1675–1692, 1971, hereafter MM71) and Denny and Johnson (Explosion source phenomenology, pp 1–24, 1991, hereafter DJ91). The source spectra inferred from the simulations of different yields at normal scaled depth-of-burial (SDOB) match the MM71 spectra reasonably well. For normally buried nuclear explosions, seismic moments are larger for the hydrodynamic simulations than MM71 (by 25 %) and for DJ91 (by over a factor of 2), however, the scaling of moment with yield across this low-yield range is consistent for our calculations and the two models. Spectra from our simulations show higher corner frequencies at the lower end of the 0.5–5.0 kt yield range and stronger variation with yield than the MM71 and DJ91 models predict. The spectra from our simulations have additional energy above the corner frequency, probably related to non-linear near-source effects, but at high frequencies the spectral slopes agree with the f ^?2 predictions of MM71. Simulations of nuclear explosions for a range of SDOB from 0.5 to 3.9 show stronger variations in the seismic moment than predicted by the MM71 and DJ91 models. Chemical explosions are found to generate higher moments by a factor of about two compared to nuclear explosions of the same yield in granite and at normal depth-of-burial, broadly consistent with comparisons of nuclear and chemical shots at the US Nevada Test Site (Denny, Proceeding of symposium on the non-proliferation experiment, Rockville, Maryland, 1994). For all buried explosions, the region of permanent deformation and material damage is not spherical but extends along the free surface above and away from the source. The effect of damage induced by a normally buried nuclear explosion on seismic radiation is explored by comparing the motions from hydrodynamic simulations with those for point-source elastic Green’s functions. Results show that radiation emerging at downward takeoff angles appears to be dominated by the expected isotropic source contribution, while at shallower angles the motions are complicated by near-surface damage and cannot be represented with the addition of a simple secondary compensated linear vector dipole point source above the shot point. The agreement and differences of simulated source spectra with the MM71 and DJ91 models motivates the use of numerical simulations to understand observed motions and investigate seismic source features for underground explosions in various emplacement media and conditions, including non-linear rheological effects such as material strength and porosity.     

Electrical resistivity tomography study of Taal volcano hydrothermal system, Philippines

Taal volcano (311?m in altitude) is located in The Philippines (14°N, 121°E) and since 1572 has erupted 33 times, causing more than 2,000 casualties during the most violent eruptions. In March 2010, the shallow structures in areas where present-day surface activity takes place were investigated by DC resistivity surveys. Electrical resistivity tomography (ERT) lines were performed above the two identified hydrothermal areas located on the northern flank of the volcano and in the Main Crater, respectively. Due to rough topography, deep valleys, and dense vegetation, most measurements were collected using a remote method based on a laboratory-made equipment. This allowed retrieval of information down to a depth of 250?m. ERTs results detail the outlines of the two geothermal fields defined by previous self-potential, CO₂ soil degassing, ground temperature, and magnetic mapping (Harada et al. Japan Acad Sci 81:261–266, 2005; Zlotnicki et al. Bull Volcanol 71:29–49, 2009a, Phys Chem Earth 34:294–408, 2009b). Hydrothermal fluids originate mainly from inside the northern part of the Main Crater at a depth greater than the bottom of the Crater Lake, and flow upward to the ground surface. Furthermore, water from the Main Crater Lake infiltrates inside the surrounding geological formations. The hydrothermal fluids, outlined by gas releases and high temperatures, cross the crater rim and interact with the northern geothermal field located outside the Main Crater.     

f max and fault zone property of Lushan earthquake of 20 April 2013, Sichuan,China

In this study, we determined f _max from near-field accelerograms of the Lushan earthquake of April 20, 2013 through spectra analysis. The result shows that the values of f _max derived from five different seismography stations are very close though these stations roughly span about 100 km along the strike. This implies that the cause of f _max is mainly the seismic source process rather than the site effect. Moreover, according to the source–cause model of Papageorgiou and Aki (Bull Seism Soc Am 73:693–722, 1983), we infer that the cohesive zone width of the rupture of the Lushan earthquake is about 204 with an uncertainty of 13 m. We also find that there is a significant bulge between 30 and 45 Hz in the amplitude spectra of accelerograms of stations 51YAL and 51QLY, and we confirm that it is due to seismic waves’ reverberation of the sedimentary soil layer beneath these stations.