Assessing building vulnerability to tsunami using the PTVA-3 model: A case study of Chabahar Bay,Iran

Chabahar Bay, in southeastern Iran, lies at the north of the Gulf of Oman and close to the Makran Subduction Zone, which makes it a region that is susceptible to tsunamis. This bay has an increasingly important role in Iran’s international trade, and therefore the assessment of the regional vulnerability to the effects of a tsunami is vital. Based on both the details of historical events and the results of numerical modeling of the propagation pattern of a tsunami in this region, this study assessed the vulnerability of buildings within the Chabahar Bay region to a tsunami event. The Papathoma Tsunami Vulnerability Assessment (PTVA) model was used to calculate a relative vulnerability index (RVI) for the affected buildings based on their physical and structural characteristics. The results showed that in a postulated worst-case-scenario tsunami event in the Chabahar Bay area, approximately 60 % of the residential buildings would be affected, a level of damage that is categorized as “Average” in the RVI classification. Overall, the economic losses related to the damage of residential buildings due to a tsunami in the Chabahar Bay area are anticipated to be the equivalent of US$ 16.5 million.     

Confidence levels for tsunami-inundation limits in northern Oregon inferred from a 10,000-year history of great earthquakes at the Cascadia subduction zone

To explore the local tsunami hazard from the Cascadia subduction zone we (1) evaluate geologically reasonable variability of the earthquake rupture process, (2) specify 25 deterministic earthquake sources, and (3) use resulting vertical coseismic deformations for simulation of tsunami inundation at Cannon Beach, Oregon. Maximum runup was 9–30 m (NAVD88) from earthquakes with slip of ~8–38 m and M _w ~8.3–9.4. Minimum subduction zone slip consistent with three tsunami deposits was 14–15 m. By assigning variable weights to the source scenarios using a logic tree, we derived percentile inundation lines that express the confidence level (percentage) that a Cascadia tsunami will not exceed the line. Ninety-nine percent of Cascadia tsunami variation is covered by runup ≤30 m and 90% ≤16 m with a “preferred” (highest weight) value of ~10 m. A hypothetical maximum-considered distant tsunami had runup of ~11 m, while the historical maximum was ~6.5 m.     

Source parameters controlling the generation and propagation of potential local tsunamis along the Cascadia margin

The largest uncertainty in assessing hazards from local tsunamis along the Cascadia margin is estimating the possible earthquake source parameters. We investigate which source parameters exert the largest influence on tsunami generation and determine how each parameter affects the amplitude of the local tsunami. The following source parameters were analyzed: (1) type of faulting characteristic of the Cascadia subduction zone, (2) amount of slip during rupture, (3) slip orientation, (4) duration of rupture, (5) physical properties of the accretionary wedge, and (6) influence of secondary faulting. The effect of each of these source parameters on the quasi-static displacement of the ocean floor is determined by using elastic three-dimensional, finite-element models. The propagation of the resulting tsunami is modeled both near the coastline using the two-dimensional (x-t) Peregrine equations that includes the effects of dispersion and near the source using the three-dimensional (x-y-t) linear long-wave equations. The source parameters that have the largest influence on local tsunami excitation are the shallowness of rupture and the amount of slip. In addition, the orientation of slip has a large effect on the directivity of the tsunami, especially for shallow dipping faults, which consequently has a direct influence on the length of coastline inundated by the tsunami. Duration of rupture, physical properties of the accretionary wedge, and secondary faulting all affect the excitation of tsunamis but to a lesser extent than the shallowness of rupture and the amount and orientation of slip. Assessment of the severity of the local tsunami hazard should take into account that relatively large tsunamis can be generated from anomalous tsunami earthquakes that rupture within the accretionary wedge in comparison to interplate thrust earthquakes of similar magnitude.     

Tsunami vulnerability assessment of Casablanca-Morocco using numerical modelling and GIS tools

Earthquakes and tsunamis along Morocco’s coasts have been reported since historical times. The threat posed by tsunamis must be included in coastal risk studies. This study focuses on the tsunami impact and vulnerability assessment of the Casablanca harbour and surrounding area using a combination of tsunami inundation numerical modelling, field survey data and geographic information system. The tsunami scenario used here is compatible with the 1755 Lisbon event that we considered to be the worst case tsunami scenario. Hydrodynamic modelling was performed with an adapted version of the Cornell Multigrid Coupled Tsunami Model from Cornell University. The simulation covers the eastern domain of the Azores-Gibraltar fracture zone corresponding to the largest tsunamigenic area in the North Atlantic. The proposed vulnerability model attempts to provide an insight into the tsunami vulnerability of building stock. Results in the form of a vulnerability map will be useful for decision makers and local authorities in preventing the community resiliency for tsunami hazards.     

Application of fragility curves to estimate building damage and economic loss at a community scale: a case study of Seaside,Oregon

Community-scale estimates of building damage and economic loss are modeled for Seaside, Oregon, for Cascadia subduction zone events ranging from 8.7 to 9.3 M_W with corresponding slip distances of 3–25 m considering only the effects of the tsunami. Numerical simulations are obtained from the National Oceanic and Atmospheric Administration’s method of splitting tsunami model which includes a source model, subsidence, and calculations of the propagation and inundation flow characteristics. The damage estimates are based on fragility curves from the literature which relate flow depth with probability of damage for two different structural materials of buildings. Calculations are performed at the parcel level for the inundation hazard without including damage caused by the earthquake itself. Calculations show that the severity of building damage in Seaside is sensitive to the magnitude of the event or degree of slip because the majority of the city is located on low-lying coastal land within the estimated inundation zone. For the events modeled, the percentage of building within the inundation zone ranges from 9 to 88 %, with average direct economic losses ranging from $2 million to $1.2 billion.     

Coastal inundation and damage exposure estimation: a case study for Jakarta

Coastal flooding poses serious threats to coastal areas, and the vulnerability of coastal communities and economic sectors to flooding will increase in the coming decades due to environmental and socioeconomic changes. It is increasingly recognised that estimates of the vulnerability of cities are essential for planning adaptation measures. Jakarta is a case in point, since parts of the city are subjected to regular flooding on a near-monthly basis. In order to assess the current and future coastal flood hazard, we set up a GIS-based flood model of northern Jakarta to simulate inundated area and value of exposed assets. Under current conditions, estimated damage exposure to extreme coastal flood events with return periods of 100 and 1,000 years is high (€4.0 and €5.2 billion, respectively). Under the scenario for 2100, damage exposure associated with these events increases by a factor 4–5, with little difference between low/high sea-level rise scenarios. This increase is mainly due to rapid land subsidence and excludes socioeconomic developments. We also develop a detemporalised inundation scenario for assessing impacts associated with any coastal flood scenario. This allows for the identification of critical points above which large increases in damage exposure can be expected and also for the assessment of adaptation options against hypothetical user-defined levels of change, rather than being bound to a discrete set of a priori scenarios. The study highlights the need for urgent attention to the land subsidence problem; a continuation of the current rate would result in catastrophic increases in damage exposure.     

Validating a Tsunami Vulnerability Assessment Model (the PTVA Model) Using Field Data from the 2004 Indian Ocean Tsunami

The “PTVAM” tsunami vulnerability assessment model [Papathoma and Dominey-Howes: 2003, Nat. Hazards Earth Syst. Sci. 3, 733–744; Papathoma et al.: 2003, Nat. Hazards Earth Syst. Sci. 3, 377–389], like all models, requires validation. We use the results from post-tsunami surveys in the Maldives following the December 26, 2004 Indian Ocean tsunami to ‘evaluate’ the appropriateness of the PTVAM attributes to understanding spatial and temporal vulnerability to tsunami damage and loss. We find that some of the PTVAM attributes are significantly important and others moderately important to understanding and assessing vulnerability. Some attributes require further investigation. Based upon the ground-truth data, we make several modifications to the model framework and propose a revised version of the PTVAM (PTVAM 2).     

A semi-probabilistic procedure for developing societal risk function

Among the coastal districts of mega city Istanbul, Bakirkoy is one of the most critical one with the importance of air and marine transportation and presence of many other coastal facilities and structures that are prone to suffer from marine hazards. In the history, the Sea of Marmara has experienced numerous earthquake and landslide events and associated tsunamis. Therefore, tsunami risk assessment is essential for all coastal districts of Istanbul, including Bakirkoy district. In this study, a further developed methodology for tsunami human vulnerability and risk assessment Metropolitan Tsunami Human Vulnerability Assessment (MeTHuVA) is applied for Bakirkoy district of Istanbul, considering earthquake generated tsunamis. High-resolution tsunami hazard analysis is performed with the integration of coastal inundation computation with tsunami numerical tool NAMI DANCE and tsunami human vulnerability assessment with GIS-based multi-criteria decision analysis methods (MCDA). Using analytical hierarchy process method of MCDA, a hierarchical structure is established, composed of two main elements of tsunami human vulnerability: Vulnerability at Location and Evacuation Resilience. Tsunami risk assessment for Bakirkoy district is calculated by integrating result of hazard and vulnerability assessments with a risk relation that includes a parameter (n), which represents the preparedness and awareness level of the community. Tsunami simulations revealed that the maximum inundation distance is over 350 m on land and water penetrates almost 1700 m along Ayamama stream. Inundation is observed in eleven neighborhoods of Bakirkoy district. In the inundation zone, maximum flow depth is found to be over 5.7 m. The inundated area forms 4.2% of whole Bakirkoy district, and 62 buildings are located in the inundation zone. Hazard, vulnerability and risk assessment results for different neighborhoods of Bakirkoy district are presented and discussed.     

Tsunami inundation in Napier, New Zealand, due to local earthquake sources

Deterministic analysis of local tsunami generated by subduction zone earthquakes demonstrates the potential for extensive inundation and building damage in Napier, New Zealand. We present the first high-resolution assessments of tsunami inundation in Napier based on full simulation from tsunami generation to inundation and demonstrate the potential variability of onshore impacts due to local earthquakes. In the most extreme scenario, rupture of the whole Hikurangi subduction margin, maximum onshore flow depth exceeds 8.0 m within 200 m of the shore and exceeds 5.0 m in the city centre, with high potential for major damage to buildings. Inundation due to single-segment or splay fault rupture is relatively limited despite the magnitudes of M_W 7.8 and greater. There is approximately 30 min available for evacuation of the inundation zone following a local rupture, and inundation could reach a maximum extent of 4 km. The central city is inundated by up to three waves, and Napier Port could be inundated repeatedly for 12 h. These new data on potential flow depth, arrival time and flow kinematics provide valuable information for tsunami education, exposure analysis and evacuation planning.     

A 3-tier tsunami vulnerability assessment technique for the north-west coast of Peninsular Malaysia

The 2004 tsunami that struck the Sumatra coast gave a warning sign to Malaysia that it is no longer regarded as safe from a future tsunami attack. Since the event, the Malaysian Government has formulated its plan of action by developing an integrated tsunami vulnerability assessment technique to determine the vulnerability levels of each sector along the 520-km-long coastline of the north-west coast of Peninsular Malaysia. The scope of assessment is focused on the vulnerability of the physical characteristics of the coastal area, and the vulnerability of the built environment in the area that includes building structures and infrastructures. The assessment was conducted in three distinct stages which stretched across from a macro-scale assessment to several local-scale and finally a micro-scale assessment. On a macro-scale assessment, Tsunami Impact Classification Maps were constructed based on the results of the tsunami propagation modelling of the various tsunami source scenarios. At this stage, highly impacted areas were selected for an assessment of the local hazards in the form of local flood maps based on the inundation modelling output. Tsunami heights and flood depths obtained from these maps were then used to produce the Tsunami Physical Vulnerability Index (PVI) maps. These maps recognize sectors within the selected areas that are highly vulnerable to a maximum tsunami run-up and flood event. The final stage is the development of the Structural Vulnerability Index (SVI) maps, which may qualitatively and quantitatively capture the physical and economic resources that are in the tsunami inundation zone during the worst-case scenario event. The results of the assessment in the form of GIS-based Tsunami-prone Vulnerability Index (PVI and SVI) maps are able to differentiate between the various levels of vulnerability, based on the tsunami height and inundation, the various levels of impact severity towards existing building structures, property and land use, and also indicate the resources and human settlements within the study area. Most importantly, the maps could help planners to establish a zoning scheme for potential coastline development based on its sensitivity to tsunami. As a result, some recommendations on evacuation routes and tsunami shelters in the potentially affected areas were also proposed to the Government as a tool for relief agencies to plan for safe evacuation.     

Building damage characteristics based on surveyed data and fragility curves of the 2011 Great East Japan tsunami

A large amount of buildings was damaged or destroyed by the 2011 Great East Japan tsunami. Numerous field surveys were conducted in order to collect the tsunami inundation extents and building damage data in the affected areas. Therefore, this event provides us with one of the most complete data set among tsunami events in history. In this study, fragility functions are derived using data provided by the Ministry of Land, Infrastructure and Transportation of Japan, with more than 250,000 structures surveyed. The set of data has details on damage level, structural material, number of stories per building and location (town). This information is crucial to the understanding of the causes of building damage, as differences in structural characteristics and building location can be taken into account in the damage probability analysis. Using least squares regression, different sets of fragility curves are derived to demonstrate the influence of structural material, number of stories and coastal topography on building damage levels. The results show a better resistant performance of reinforced concrete and steel buildings over wood or masonry buildings. Also, buildings taller than two stories were confirmed to be much stronger than the buildings of one or two stories. The damage characteristic due to the coastal topography based on limited number of data in town locations is also shortly discussed here. At the same tsunami inundation depth, buildings along the Sanriku ria coast were much greater damaged than buildings from the plain coast in Sendai. The difference in damage states can be explained by the faster flow velocities in the ria coast at the same inundation depth. These findings are key to support better future building damage assessments, land use management and disaster planning.     

Damage to residential buildings due to flooding of New Orleans after hurricane Katrina

This article analyzes the direct damage to residential buildings caused by the flooding of New Orleans after hurricane Katrina in the year 2005. A public dataset has been analyzed that contains information on the economic damage levels for approximately 95,000 residential buildings in the flooded area. The relationship between the flood characteristics and economic damage to residential buildings has been investigated. Results of hydrodynamic flood simulations have been used that give insight in water depths and flow velocities in the study area. In general, differences between the three polders in the observed distributions of damage estimates are related to differences in flood conditions. The highest damage percentages and structural damage mainly occurred in areas where higher flow velocities occurred, especially near the breaches in the Lower 9th Ward neighborhood. Further statistical analysis indicated that there is not any strong one-to-one relationship between the damage percentage and the water depth or the depth–velocity product. This suggests that there is considerable uncertainty associated with stage-damage functions, especially when they are applied to individual structures or smaller clusters of buildings. Based on the data, a more general approach has been proposed that could be used to distinguish different damage zones based on water depth and flow velocity for an area that is affected by flooding due to breaching of flood defenses. Further validation of existing damage models with the dataset and further inclusion of information on building type in the analysis of damage levels is recommended.     

Spatial and temporal variations in the incidence of dust events over Iran

Large near-field tsunamis pose a significant threat to the Canadian West Coast due to its proximity to the circum-Pacific belt where a significant tsunami-inducing earthquake event from the Cascadia subduction zone is expected. This study investigated the risks associated with such an event in terms of pedestrian evacuation needs and plans for the Town of Tofino, a small community located on the West Coast of Vancouver Island. The population-at-risk within the hazard zone and its ability to evacuate to safety is evaluated using anisotropic path-distance modelling. Mitigation measures, such as vertical evacuation buildings, are quantitatively evaluated. Site-specific inundation modelling was not performed as part of this study; tsunami hazard and safe zones were computed using a range of run-ups varying between 3 and 25 m. It was established that up to 80% of the population is within the maximum hazard zone considered. This evacuation modelling exercise indicates that a maximum of 13% of the population would have insufficient time to reach safety when using a mobility-impaired ambulatory speed. The use of three vertical evacuation buildings can reduce the risk of losing population in this category by 99%. Although some conservative assumptions were used (vertical datum at higher high water, reductions in safe zones by generalization process and mobility-impaired evacuation speeds), the evacuation potential is likely overestimated due to the coarseness of the topographic data used in the evacuation modelling and from an overestimated first wave arrival time. This is the first Canadian study which used anisotropic evacuation modelling to evaluate the vulnerability of a Canadian community to tsunami inundation.

     

Tsunami vulnerability assessment in urban areas using numerical model and GIS

Natural disasters can neither be predicted nor prevented. Urban areas with a high population density coupled with the construction of man-made structures are subjected to greater levels of risk to life and property in the event of natural hazards. One of the major and densely populated urban areas in the east coast of India is the city of Chennai (Madras), which was severely affected by the 2004 Tsunami, and mitigation efforts were severely dampened due to the non-availability of data on the vulnerability on the Chennai coast to tsunami hazard. Chennai is prone to coastal hazards and hence has hazard maps on its earth-quake prone areas, cyclone prone areas and flood prone areas but no information on areas vulnerable to tsunamis. Hence, mapping has to be done of the areas where the tsunami of December 2004 had directly hit and flooded the coastal areas in Chennai in order to develop tsunami vulnerability map for coastal Chennai. The objective of this study is to develop a GIS-based tsunami vulnerability map for Chennai by using a numerical model of tsunami propagation together with documented observations and field measurements of the evidence left behind by the tsunami in December 2004. World-renowned and the second-longest tourist beach in the world “Marina” present in this region witnessed maximum death toll due to its flat topography, resulting in an inundation of about 300 m landward with high flow velocity of the order of 2 m/s.     

Experimental vulnerability curves for the residential buildings of Iran

Iran is one of the most seismically active countries of the world located on the Alpine-Himalayan earthquake belt. More than 180,000 people were killed due to earthquakes in Iran during the last five decades. Considering the fact that most Iranians live in masonry and non-engineered houses, having a comprehensive program for decreasing the vulnerability of society holds considerable importance. For this reason, loss estimation should be done before an earthquake strikes to prepare proper information for designing and selection of emergency plans and the retrofitting strategies prior to occurrence of earthquake. The loss estimation process consists of two principal steps of hazard analysis and vulnerability assessment. After identifying the earthquake hazard, the first step is to evaluate the vulnerability of residential buildings and lifelines and also the social and economic impacts of the earthquake scenarios. Among these, residential buildings have specific importance, because their destruction will disturb the daily life and result in casualties. Consequently, the vulnerability assessment of the buildings in Iran is important to identify the weak points in the built environment structure. The aim of this research is to prepare vulnerability curves for the residential buildings of Iran to provide a proper base for estimating probable damage features by future earthquakes. The estimation may contribute fundamentally for better seismic performance of Iranian societies. After a brief review of the vulnerability assessment methods in Iran and other countries, through the use of the European Macroseismic method, a model for evaluating the vulnerability of the Iranian buildings is proposed. This method allows the vulnerability assessment for numerous sets of buildings by defining the vulnerability curves for each building type based on the damage observations of previous earthquakes. For defining the vulnerability curves, a building typology classification is presented in this article, which is representative of Iranian building characteristics. The hazard is described in terms of the macroseismic intensity and the EMS-98 damage grades have been considered for classifying the physical damage to the buildings. The calculated vulnerability indexes and vulnerability curves show that for engineered houses there is not any notable difference between the vulnerability of Iranian and Risk-UE building types. For the non-engineered houses, the vulnerability index of brick and steel structures is less than the corresponding values of the other unreinforced masonry buildings of Iran. The vulnerability index of unreinforced and masonry buildings of Iran are larger than the values of the similar types in Risk-UE and so the Iranian buildings are more vulnerable in this regard.     

Driving forces of the villages hollowing based on geographically weighted regression model: a case study of Longde County,the Ningxia Hui Autonomous Region,China

Flooding is a serious problem in Jakarta, and detailed estimation of flood damage is necessary to design optimal flood management strategies. This study aims to estimate flood damage in a densely populated area in Jakarta by means of a survey, to develop the relationship between flood characteristics and flood damage, and to compare the damage estimates from the survey with the damage estimates obtained by a flood damage model for Jakarta, i.e. the damage scanner model. We collected data on economic losses of the January 2013 flood in a survey of flood-affected households and business units in Pesanggrahan River. The actual flood damage in the survey area is US$ 0.5 million for the residential sector and US$ 0.7 million for the business sector. The flood damage for a similar event in the same area based on the damage scanner model is estimated to be US$ 1.3 million for the residential sector and US$ 9.2 million for the business sector. The flood damage estimates obtained by the survey approach are lower compared to the damage scanner approach due to different ways in obtaining flood damage data and in defining the maximum flood damage per object, the different spatial levels of analysis, and uncertainties in constructing the flood damage curves that were applied in the damage scanner model.     

Evidence for mid- to late-Holocene palaeotsunami deposits,Kakawis Lake,Vancouver Island,British Columbia

Kakawis Lake situated four metres above sea level on western Vancouver Island, British Columbia, Canada, was the target of a palaeotsunami investigation. Six percussion cores recovered from this lake contain six anomalous deposits interbedded within the unconsolidated lacustrine sediments. Detailed sedimentological, geophysical and macro-fraction analyses were performed. The methods new to palaeoseismic approaches proved to be successful tools to characterize the anomalously coarse layers enriched in terrestrial plant detritus and marine shells. Based on at least eight types of evidence, six tsunami inundations are suggested as mechanisms responsible for the anomalous deposition, spanning from 3,634 to 2,534 cal yrs BP. Each tsunami event consists of a combination of different lithological facies resulting from different stages of tsunami inundation and settling of the material in the lake basin (pulses and inter-pulses). Tsunami deposits in lakes are shown to be less vulnerable to erosional and bioturbation processes than those found in marshes or beaches as well as underwater marine environments. However, few palaeoseismic studies have been carried out in low-elevation lakes along the Cascadia Subduction Zone region. The three last tsunami events known to have inundated areas along the Pacific shores of southern British Columbia, Canada and northern USA are not present at Kakawis Lake, establishing a current <4 m above mean sea level vertical limit as possible maximum tsunami height for areas located away from fjord heads on Vancouver Island. The anomalous deposits found in Kakawis Lake may be the oldest geological evidence of inferred tsunami on Vancouver Island, providing a possible recurrence interval between 200 and 400 years.     

What do people think about the flood risk? An experience with the residents of Talcahuano city,Chile

In the province of Concepción (Chile), floods are considered one of the main natural hazards. One of the most important cities of this area is Talcahuano. During the last years, Talcahuano has been affected by a number of flood episodes, as a consequence of an increase in the frequency of extraordinary atmospheric events, along with a higher exposure to the flood risk caused by an intense urban development. On 27 February 2010, an 8.8° earthquake (Richter scale) occurred in central southern Chile and originated the tsunami which flooded a large percentage of the residential area and military base of the Talcahuano city. This flood event affected a population higher than 180,000 people (including 23 casualties and invaluable economic and environmental losses). The objective of this study is to investigate the social perception and knowledge of Talcahuano residents affected by different types of flood, including tsunami, emphasizing which are their risks, vulnerability, resilience and coping capacity concepts. In addition, the kind of measures that have been proposed to improve their capacity to face floods after having suffered the natural disaster will be determined. This social assessment has been carried out based on a survey to permanent residents. Research results reveal that their endogenous and exogenous characteristics have resulted determinant to explain their perception.     

Reconstruction management policies in residential and commercial sectors after the 2003 bam earthquake in Iran

In the very early hours of 26th December 2003, a devastating and strong earthquake with a magnitude of 6.5 struck Bam, one of the historical cities of Kerman province in the south of Iran. According to the official reports, more than 30,000 were killed and about 25,000 injured. More than 80% of the town’s buildings were also destroyed. After the disaster, Bam’s reconstruction management process was presented with a lot of challenges and faced many fundamental questions. The number of human losses and related social issues, extensive destruction of the historical town, and also the lack of good experience in the reconstruction of a city or town made the reconstruction project of Bam more complicated. The reconstruction of Bam was the most important post-disaster reconstruction project among recent reconstructions in Iran. Many factors, such as concern over the government and international agencies, the new managerial approaches, and the application of appropriate reconstruction methods, made it different from the other reconstruction programs. Thus, the post-earthquake reconstruction of Bam is investigated in this research with respect to the importance of this issue. The aim behind this article is to give a brief explanation of the earthquake reconstruction management policies in Bam and also the plans for the reconstruction and rebuilding of urban residential and commercial units.     

Building damage assessment after the <Emphasis Type="Italic">Riviera del Brenta</Emphasis> tornado,northeast Italy

A tornado with severe intensity hit the municipalities of Pianiga, Dolo and Mira close to Venice, northeast Italy, causing damages on a wide number of residential and industrial buildings and destroying some historical villas. In this study, the authors show the results of the damage assessment survey performed in the first days after the occurrence of the extreme event. Limited literature deals with damage assessment of European building types due to wind actions, and the available one does not consider building vulnerability as key factor in the structural response of existing structures subject to tornado hazard. In this paper, structural damages surveyed in reinforced concrete frame structures and masonry buildings, representative of common Italian building types, are critically discussed. Additionally, this work provides a database of past tornado events in northeast Italy, evidencing how the analyzed area has been found to be quite prone to tornado hazard.