Hierarchically nested river landform sequences. Part 2: Bankfull channel morphodynamics governed by valley nesting structure

River corridors exhibit landforms nested within landforms repeatedly down spatial scales. In Pasternack et al. ( 2018 ), a new, scale‐independent, hierarchical river classification was developed that uses five landform types to map the domains of a single fluvial process – flow convergence routing – at each of three–five spatial scales. Given those methods, this study investigated the details of how flow convergence routing organizes nested landform sequences. The method involved analyzing landform abundance, sequencing, and hierarchical nesting along the 35 km gravel/cobble lower Yuba River in California. Independent testing of flow convergence routing found that hydraulic patterns at every flow matched the essential predictions from classification, substantiating the process–morphology link. River width and bed elevation sequences exhibit large, nonrandom, and linked oscillations structured to preferentially yield wide bars and constricted pools at base flow and bankfull flow. At a flow of 8.44 times bankfull, there is still an abundance of wide bar and constricted pool landforms, but larger topographic drivers also yield an abundance of nozzle and oversized landforms. The nested structure of flow convergence routing landforms reveals that base flow and bankfull landforms are nested together within specific floodprone valley landform types, and these landform types control channel morphodynamics during moderate to large floods. As a result, this study calls into question the prevailing theory that the bankfull channel of a gravel/cobble river is controlled by in‐channel, bankfull, and/or small flood flows. Such flows may initiate sediment transport, but they are too small to control landform organization in a gravel/cobble river with topographic complexity. Copyright © 2018 John Wiley & Sons, Ltd.     

Hierarchically nested river landform sequences. Part 1: Theory

Past river classifications use incommensurate typologies at each spatial scale and do not capture the pivotal role of topographic variability at each scale in driving the morphodynamics responsible for evolving hierarchically nested fluvial landforms. This study developed a new way to create geomorphic classifications using metrics diagnostic of individual processes the same way at every spatial scale and spanning a wide range of scales. We tested the approach on flow convergence routing, a geomorphically and ecologically important process with different morphodynamic states of erosion, routing, and deposition depending on the structure of nondimensional topographic variability. Five nondimensional landform types with unique functionality represent this process at any flow; they are nozzle, wide bar, normal channel, constricted pool, and oversized. These landforms are then nested within themselves by considering their longitudinal sequencing at key flows representing geomorphically important stages. A data analysis framework was developed to answer questions about the stage‐dependent spatial structure of topographic variability. Nesting permutations constrain and reveal how flow convergence routing morphodynamics functions in any river the framework is applied to. The methodology may also be used with other physical and biological datasets to evaluate the extent to which the patterning in that data is influenced by flow convergence routing. Copyright © 2018 John Wiley & Sons, Ltd.     

Influence of microclimate and geomorphological factors on alpine vegetation in the Western Swiss Alps

Among the numerous environmental factors affecting plant communities in alpine ecosystems, the influence of geomorphic processes and landforms has been minimally investigated. Subjected to persistent climate warming, it is vital to understand how these factors affect vegetation properties. Here, we studied 72 vegetation plots across three sites located in the Western Swiss Alps, characterized by high geomorphological variability and plant diversity. For each plot, vascular plant species were inventoried and ground surface temperature, soil moisture, topographic variables, earth surface processes (ESPs) and landform morphodynamics were assessed. The relationships between plant communities and environmental variables were analysed using non-metric multi-dimensional scaling (NMDS) and multivariate regression techniques (generalized linear model, GLM, and generalized additive model, GAM). Landform morphodynamics, growing degree days (sum of degree days above 5°C) and mean ground surface temperature were the most important explanatory variables of plant community composition. Furthermore, the regression models for species cover and species richness were significantly improved by adding a morphodynamics variable. This study provides complementary support that landform morphodynamics is a key factor, combined with growing degree days, to explain alpine plant distribution and community composition. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.     

Optimization of UAVs-SfM data collection in aeolian landform morphodynamics: a case study from the Gonghe Basin,China

UAVs-SfM (unmanned aerial vehicles-structure-from-motion) systems can generate high-resolution three-dimensional (3D) topographic models of aeolian landforms. To explore the optimization of UAVs-SfM for use in aeolian landform morphodynamics, this study tested flight parameters for two contrasting aeolian landform areas (free dune and blowout) to assess the 3D reconstruction accuracy of the UAV survey compared with field point measurements using differential RTK-GPS (real-time kinematic-global positioning system). The results reveal the optimum UAVs-SfM flight set-up at the free-dune site was: flying height = 74 m, camera tilt angle = −90°, photograph overlap ratio = 85%/70% (heading/sideways). The horizontal/vertical location error was around 0.028–0.055 m and 0.053–0.069 m, respectively, and a point cloud density of 463/m³ was found to generate a clear texture using these flying parameters. For the < 20 m deep blowout the optimum set-up with highest accuracy and the lowest cliff texture distortion was: flying height = 74 m combined camera tilt angle = −90° and −60°, photograph overlap ratio = 85%/70% (heading/sideways), and an evenly distributed GCPs (ground control points) density of 42/km² using these flying parameters. When the depth of the blowouts exceeded 40 m, the optimum flight/survey parameters changed slightly to account for more challenging cliff texture generation: flying height = 80 m (with −90° and −60°combined camera tilt angle), GCPs density = 63/km² to generate horizontal and vertical location error of 0.024 m and 0.050 m, respectively, and point cloud density of 2597.11/m³. The main external factors that affect the successful 3D reconstruction of aeolian landforms using UAVs-SfM are the weather conditions, manipulation errors, and instrument system errors. The UAVs-SfM topographic monitoring results demonstrate that UAVs provide a viable and robust means for aeolian landform morphodynamics monitoring. Importantly, the rapid and high precision 3D reconstruction processes were significantly advanced using the optimal flight parameters reported here. © 2020 John Wiley & Sons, Ltd.     

局部地形下入射波散射效应对场地地震响应的影响

局部地形下入射波散射效应对场地地震响应的影响是目前众多学者所关注的问题.其影响主要由入射波频率、入射角度、地形几何形状、介质性质等几个因素所制约,所反应出来的散射效应主要体现在地表位移变化上.本文归纳了凹陷地形、凸起地形、沉积谷地以及复合地形这四类局部地形入射波散射效应对场地地震响应的影响,对目前研究成果进行了评述,并针对数学技术、工程应用、模型建立等7个方面指出了现今存在的问题和今后发展的方向.     

Reflections on the history of research on large wood in rivers

Dynamics and functions of large wood have become integral considerations in the science and management of river systems. Study of large wood in rivers took place as monitoring of fish response to wooden structures placed in rivers in the central United States in the early 20th century, but did not begin in earnest until the 1970s. Research has increased in intensity and thematic scope ever since. A wide range of factors has prompted these research efforts, including basic understanding of stream systems, protection and restoration of aquatic ecosystems, and environmental hazards in mountain environments. Research and management have adopted perspectives from ecology, geomorphology, and engineering, using observational, experimental, and modelling approaches. Important advances have been made where practical information needs converge with institutional and science leadership capacities to undertake multi-pronged research programmes. Case studies include ecosystem research to inform regulations for forest management; storage and transport of large wood as a component in global carbon dynamics; and the role of wood transport in environmental hazards in mountain regions, including areas affected by severe landscape disturbances, such as volcanic eruptions. As the field of research has advanced, influences of large wood on river structures and processes have been merged with understanding of streamflow and sediment regimes, so river form and function are now viewed as involving the tripartite system of water, sediment, and wood. A growing community of researchers and river managers is extending understanding of large wood in rivers to climatic, forest, landform, and social contexts not previously investigated. © 2020 John Wiley & Sons, Ltd.     

Geomorphic response to an active transpressive regime: a case study along the Chaman strike‐slip fault,western Pakistan

The Chaman left‐lateral strike‐slip fault bounds the rigid Indian plate boundary at the western end of the Himalayan‐Tibetan orogen and is marked by contrasting topographic relief. Deformed landforms along the fault provide an excellent record for understanding this actively evolving intra‐continental strike‐slip fault. The geomorphic response of an active transpessional stretch of the Chaman fault was studied using digital elevation model (DEM) data integrated with Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Visible and Near Infrared/Short Wave Infrared (VNIR/SWIR) and images from GeoEye‐1. Geologic and geomorphic mapping helped in reconstructing the Late Quaternary landscape history of this transpessional strand of the Chaman strike‐slip fault and the associated Spinatizha thrust fault in western Pakistan. Topographic analysis of a part of the transpression (the thrust bounded Roghani ridge) revealed northward growth of the Spinatizha fault with the presence of three water gaps and two corresponding wind gaps. Geomorphic indices including stream length‐gradient index, mountain front sinuosity, valley floor width to valley height ratios, and entrenchment of recent alluvial fan deposits were used to define the lateral growth and direction of propagation of the Spinatizha fault. Left‐lateral displacement along Chaman fault and uplift along the Spinatizha fault was defined using topographic analysis of the Roghani ridge and geomorphic mapping of an impressive alluvial fan, the Bostankaul fan. The landforms and structures record slip partitioning along the Indian plate boundary, and account for the convergence resulting from the difference in the Chaman fault azimuth and orientation of the velocity vector of the Indian plate. Copyright © 2012 John Wiley & Sons, Ltd.     

Determining transition reaches between torrents and downstream rivers using a valley morphology index in a mountainous landscape

Dividing rivers into homogeneous reaches is key for river processes and watershed management. In contrast to downstream fluvially dominated rivers, upstream debris-flow dominated torrents have steeper channel slopes and smaller valley width/depth ratios. Investigating transition reaches between torrents and fluvially dominated rivers, not only explores the structure of the landscape, but also contributes to hazard management. This study proposed a valley morphology index combining two variables, channel slope and valley width/depth ratio, to determine transition reaches between torrents and rivers. The methodology was applied to 41 mountain streams in Taiwan using a Geographic Information System (GIS)-based topographic analysis. Plots of valley width/depth ratio versus channel slope were used to determine boundary values of the valley morphology index (I_v) separating torrents from rivers. The plots showed that about 80% of the river basins present “L-shaped” curves, which indicate sharp decreases in slope for upstream sections and dramatic increases of valley width/depth ratio for downstream sections. Results further demonstrated an average value of I_v 0.0047 across the study sites. Spatial comparison between geographic regions indicated that transition reaches in eastern rivers tend to occur lower in the drainage basin due, in part, to higher terrain. Local factors, such as tributary confluences and landslides promote the transition from torrents to fluvially dominated rivers. Satellite images verified that the approach correctly identified transition reaches, suggesting that it may provide a useful reference for river management.     

Experimental analysis of reservoir release wave routing in upland boulder bed rivers

Reservoir release wave routing during 33 controlled reservoir releases, along 15 upland boulder bed river channel reaches, on five different regulated rivers were monitored to assess the importance of river channel roughness and reservoir release magnitude on reservoir release wave speeds. Wave speeds varied between 0.52 and 3.01 m s^?1. Reservoir release wave translation, steepening, and attenuation occurred. With high channel roughness values reservoir release wave arrival speed is retarded in comparison to peak stage and wave steepening occurs, but with a reduction in channel roughness reservoir release wave front arrival is accelerated producing attentuation. The threshold between reservoir release wave front attenuation and steepening occurs at a pre-release discharge/channel width of approximately 0.1, an index of channel roughness. The paper also demonstrates, via comparison of observed and calculated reservoir release wave speeds on the River Washburn, Yorkshire, the difficulty of accurately predicting flood wave movement in upland boulder bed channels using existing prediction equations. The calculated values, however, revealed systematic error with pre-release discharge and reservoir release magnitude. Apparently the equations fail to account for the effects of high channel roughness together with pressure gradient forces, induced by rapid rates of stage change on the rising limb of reservoir releases. In order to accurately predict reservoir release wave movement in regulated rivers, this paper demonstrates that hydraulic studies need to be undertaken and pre-release discharges prescribed to determine desired reservoir release wave routing behaviour. Manipulation of the reservoir release pattern at the dam alone, cannot dictate reservoir release wave front form downstream or wave speed.     

The variability in the morphological active width: Results from physical models of gravel‐bed braided rivers

The morphological active width, defined as the lateral extent of bed material displacement over time, is a fundamental parameter in multi‐threaded gravel‐bed rivers, linking complex channel dynamics to bedload transport. Here, results are presented from five constant discharge experiments, and three event hydrographs, covering a range of flow strengths and channel configurations for which morphological change, bedload transport rates, and stream power were measured in a physical model. Changes in channel morphology were determined via differencing of photogrammetrically‐derived digital elevation models (DEMs) of the model surface generated at regular intervals over the course of ~115 h of experimental runs. Independent measures of total bedload output were made using downstream sediment baskets. Results indicate that the morphological active width increases with total and dimensionless stream power and is strongly and positively correlated with bulk change (total volume of bed material displaced over time) and active braiding intensity (ABI). Although there is considerable scatter due to the inherent variability in braided river morphodynamics, the active width is positively correlated with independent measurements of bedload transport rate. Active width, bulk change, and bedload transport rates were all negligible below a dimensionless stream power threshold value of ~ 0.09, above which all increase with flow strength. Therefore, the active width could be used as a general predictor of bulk change and bedload transport rates, which in turn could be approximated from total and dimensionless stream power or ABI in gravel‐bed braided rivers. Furthermore, results highlight the importance of the active width, rather than the morphological active depth, in predicting volumes of change and bedload transport rates. The results contribute to the larger goals of better understanding braided river morphodynamics, creating large high‐resolution datasets of channel change for model calibration and validation, and developing morphological methods for predicting bedload transport rates in braiding river systems. Copyright © 2018 John Wiley & Sons, Ltd.     

Riparian vegetation life stages control the impact of flood sequencing on braided river morphodynamics

With riverine flooding set to be more frequent in many parts of the world as a result of climate change, the interactions between fluvial morphodynamics and riparian vegetation may depend in part on the sequence of flood events. This paper describes a laboratory study of the geomorphic adjustment of a braided river to sequences of floods across five different strengths of braidplain vegetation. By using alfalfa as a proxy for braidplain vegetation, the differing plant life stages were used to represent the varying strengths of biogeomorphic feedbacks across the floods. Boundary conditions were constrained by sets of experimental runs with both equilibrium sediment loads and deficit loads. Changes in bed topography were monitored and assessed using a detailed digital elevation model, digital imagery and continuous monitoring of the transported sediment. Results demonstrate that in absence of plant colonization, vegetation placed the rivers in a non-equilibrium condition, in which riparian vegetation encouraged the development of new channels, increased the system channel width and enhanced topographic irregularity, these effects being more noticeable during the low-flow periods. The morphodynamics was found to be less sensitive to variations in flood discharges as the vegetation influence (strength) increased from minimum to maximum, until vegetation began to die back and the impacts of flood sequences became yet again evident. Although the overall sediment transport rate was reduced under full-grown vegetation conditions, the presence of the mature plants across the braid bars resulted in the greatest channel scour depths. Results are considered in light of expected changes in flood frequency with climate and likely morphodynamic responses of river systems as a result.     

Local variations of solifluction activity and environment in the Abisko Mountains,Northern Sweden

Seven sites within the mountain region of Abisko, northern Sweden, were selected for measurement of solifluction movement rates and correlation with the local environmental factors. Grids with sizes from 20 m × 30 m to 50 m × 100 m included both solifluction landforms and adjacent ground. Positions of movement markers and the terrain were recorded and the grid areas were digitally reconstructed. This allowed topography, vegetation and soil texture (fraction of fine material) surfaces to be interpolated and used together with data on soil moisture in statistical analyses. Significant correlations differ from site to site indicating that environmental factors have varying importance and inter‐relations depending on the local setting. Geomorphic work was also assessed within the grids. The results indicate measurable geomorphic work where no landforms are present. These areas may make larger contributions to sediment displacement than where solifluction landforms exist. Solifluction is an important denudational agent in the region and has its greatest impact on landscape development in the western part of the region. Copyright © 2011 John Wiley & Sons, Ltd.     

The legacy of initial conditions in landscape evolution

Landscapes subject to constant forcing tend to evolve toward equilibrium states in which individual landforms have similar characteristics. Yet, even in landscapes at or near equilibrium, there can be significant variability among individual landforms. Furthermore, sites subject to similar processes and conditions can have different mean landform characteristics. This variability is often ascribed to on‐going transient evolution, or to heterogeneity in processes, material properties, forcing, or boundary conditions. Three surprising outcomes of landform evolution models suggest, however, that such variability could arise in equilibrium landscapes without any heterogeneity in the physical processes shaping the topography. First, homogeneous systems subjected to constant forcing can generate a heterogeneous distribution of equilibrium landforms. Second, even simple non‐linear systems can have multiple stable equilibrium states. Third, evolving landscapes can exhibit path dependence and hysteresis. We show how these three mechanisms can produce variability in landforms that arises from the characteristics of the initial topographic surface rather than from heterogeneity in geomorphic processes. Numerical experiments on the formation of low‐order fluvial valleys and transportational cyclic steps in erodible streambeds illustrate why it is important to consider the influence of initial conditions when comparing models with natural topography, estimating the uncertainty of model predictions, and studying how landscapes respond to disturbances. Copyright © 2011 John Wiley & Sons, Ltd.     

Topographic change and numerically modelled near surface wind flow in a bowl blowout

A number of studies have measured and numerically modelled near surface wind velocity over a range of aeolian landforms and made suppositions about topographic change and landform evolution. However, the precise measurement and correlation of flow dynamics and resulting topographic change have not yet been fully realized. Here, using repeated high-resolution terrestrial laser scanning and numerical flow modelling within a bowl blowout, we statistically analyse the relationship between wind speed, vertical wind velocity, turbulent kinetic energy and topographic change over a 33-day period. Topographic results showed that erosion and deposition occurred in distinct regions within the blowout. Deposition occurred in the upwind third of the deflation basin, where wind flow became separated and velocity and turbulent kinetic energy decreased, and erosion occurred in the downwind third of the deflation basin, where wind flow reattached and aligned with incident wind direction. Statistical analysis of wind flow and topographic change indicated that wind speed had a strong correlation with overall topographic change and that vertical wind velocity (including both positive and negative) displayed a strong correlation with negative topographic change (erosion). Only weak or very weak correlations exist for wind flow parameters and positive topographic change (accretion). This study demonstrates that wind flow modelling using average incident wind conditions can be utilized successfully to identify regions of overall change and erosion for a complex aeolian landform, but not to identify and predict regions where solely accretion will occur. © 2019 John Wiley & Sons, Ltd.     

EXTRACTING FEATURES OF ALLUVIAL FAN AND DISCUSSING LANDFORMS EVOLUTION BASED ON HIGH-RESOLUTION TOPOGRAPHY DATA: TAKING ALLUVIAL FAN OF LAOHUSHAN ALONG HAIYUAN FAULT ZONE AS AN INSTANCE

Range-front alluvial fan deposition in arid and semiarid environments records vast amounts of climatic and tectonic information. Differentiating and characterizing alluvial fan morphology is an important part in Quaternary alluvial fan research. Traditional method such as field observations is a most important part of deciphering and mapping the alluvial fan. Large-scale automatically mapping of alluvial fan stratigraphy before traditional field observations could provide guidance for mapping alluvial fan morphology, thus improving subsequent field work efficiency. In this research, high-resolution topographic data were used to quantify relief and roughness of alluvial fan within the Laohushan. These data suggest that mean surface roughness plotted against the size of the moving window is characterized by an initial increase in surface roughness with increased window size, but it shows no longer increase as a function of windows size. These data also suggest that alluvial fans in this study site smooth out with time until a threshold is crossed where roughness increases at greater wavelength with age as a result of surface runoff and headward tributary incision into the oldest surfaces which suggests the evolution process of alluvial fan. Researchers usually differentiate alluvial morphology by mapping characteristics of fan surface in the field by describing surface clast size, rock varnish accumulation, and desert pavement development and analysis of aerial photographs or satellite imagery. Recently, the emergence of high-resolution topographic data has renewed interest in the quantitative characterization of alluvial and colluvium landforms. Surface morphology that fan surface initially tends to become smoother with increasing age due to the formation of desert pavement and the degradation of bar-and-swale topography and subsequently, landforms become more dissected due to tectonics and climatic change induced increased erosion and channelization of the surface with time is widely used to distinguish alluvial fan types. Those characteristics would reflect various kinds of morphology metrics extracted from high-resolution topographic data. In the arid and semiarid regions of northwestern China, plenty of alluvial fans are preserved completely for lack of artificial reforming, and there exists sparse surface vegetation. In the meantime, range-front alluvial fan displaced by a number of active faults formed a series of dislocated landforms with different offsets which is a major reference mark in fault activity research. In this research, six map units(Qf₆-Qf₁), youngest to oldest, were observed in the study area by mapping performed by identifying geomorphic features in the field that are spatially discernible using hill-shade and digital orthophoto map. Alluvial fan relief and roughness were computed across multiple observation scales(2m×2m to 100m×100m)based on the topographic parameters of altitude difference and standard deviation of slope, curvature and aspect. In this research, mean relief keeps increasing with increased window size while mean surface roughness is characterized by a rapid increase over wavelengths of 6~15m, representing the typical length scale of bar-and-swale topography. At longer wavelengths, surface roughness values increase by only minor amounts, suggesting the topographic saturation length is 6~15m for those fan surfaces in which saturation length of standard deviation of curvature is less than 8m. Box and whisker plot of surface roughness averaged over 8m² for each alluvial fan unit in the study area suggests that the pattern of surfaces smoothing out with age and then starting to become rougher again as age increases further beyond Qf₄ or Qf₃ unit. The younger alluvial fan is characterized by prominent bar-and-swale while the older alluvial fan is characterized by tributaries headward incision. Cumulative frequency distributions of relief and surface roughness in Figure 8 are determined in an 8m by 8m moving window for the comparison of six alluvial fan units in the northeast piedmont of Laohushan. From these distributions we know that Qf₆ and Qf₁ reflect the prominent relief which is related to bar-and-swale and tributaries headward incision respectively, while Qf₄ and Qf₃ reflect the moderate relief which is related to subdued topography. Surface roughness, in addition to facilitating the characterization of individual fan units, lends insight to alluvial landform development. We summarize an alluvial landform evolutionary scheme which evolves four stages depending on characteristics of alluvial fan morphology development and features of relief and roughness. The initial stage in this study site is defined as the active alluvial fan channels with bars of coarse cobbles and boulders and swales consisting of finer-grained pebbles and sand which could be reflected by high mean relief and mean roughness values. As time goes, bar-and-swale topography is still present, but an immature pavement, composed of finer grained clasts, has started to form. In the third stage, the bar-and-swale topography on the fan surface is subdued, yet still observable, with clasts ranging from pebbles to cobbles in size and there exists obvious headward tributary incision. Eventually, tributary channels form from erosion by surface runoff. Headward incision of these tributaries wears down the steep walls of channels that are incised through the stable, planar surface, transforming the oldest alluvial landforms into convex hillslopes, leaving only small remnants of the planar surface intact. Those evolutionary character suggests that alluvial fans in this area smooth out with time, however, relief or roughness would be translated to increase at greater wavelength with age until a threshold is crossed. This research suggests that relief and roughness calculated from high-resolution topographic data of this study site could reflect alluvial fan morphology development and provide constraint data to differentiate alluvial fan unit.     

Surface velocity fields of active rock glaciers and ice-debris complexes in the Central Andes of Argentina

Rock glaciers and transitional ice-debris complexes predominate the Central Andean landform assemblage, yet regional studies on their state of activity and their kinematics remain sparse. Here we utilize the national glacier inventory of Argentina to quantify surface velocity fields of 244 rock glaciers and 51 ice-debris complexes, located in the Cordón del Plata range, Argentina. Applying a feature-tracking approach to repeated RapidEye satellite imagery acquired between 2010 and 2017/18, we find mean displacement rates between 0.37 and 2.61 m year⁻¹ for 149 landforms, while for the remaining 146 features, surface movement remains below our level of detection. We compare our satellite-derived velocity fields with ground-truth data from two local field sites and find closely matching results in magnitude and spatial distribution. With average displacement of one-third of the active rock glaciers and ice-debris complexes exceeding 1 m year⁻¹, the region hosts an exceptional number of fast-flowing periglacial landforms, compared to other mountain belts. Using a random forest model, we test the predictive power of 25 morphometric and topoclimatic candidate predictors for modelling the state of activity of rock glaciers and ice-debris complexes on two different scales. For entire landforms and individual landform segments, constructed along displacement centrelines, we can predict the state of activity with overall accuracies of 70.08% (mean AUROC = 0.785) and 74.86% (mean AUROC = 0.753), respectively. While topoclimatic parameters such as solar radiation and elevation are most important for entire landforms, geometric parameters become more important at the scale of landform segments. Despite tentative correlations between local slope and surface kinematics, our results point to factors integrating slope and distance to the source to govern local deformation. We conclude that feature tracking in optical imagery is feasible for regional studies in remote regions and provides valuable insight into the current state of the Andean cryosphere. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Application of globally available,coarse-resolution digital elevation models for delineating valley bottom segments of varying length across a catchment

The worldwide availability of digital elevation models (DEMs) has enabled rapid (semi-)automated mapping of earth surface landforms. In this paper, we first present an approach for delineating valley bottom extent across a large catchment using only publicly available, coarse-resolution DEM input. We assess the sensitivity of our results to variable DEM resolution and find that coarse-resolution datasets (90 m resolution) provide superior results. We also find that LiDAR-derived DEMs produce more realistic results than satellite-derived DEMs across the full range of topographic settings tested. Satellite-derived DEMs perform more effectively in moderate topographic settings, but fail to capture the subtleties of valley bottom extent in mild gradient, low-lying topography and in narrow headwater reaches. Second, we present a semi-automated technique within ArcGIS for delineating valley bottom segments using DEM-derived network scale metrics of valley bottom width and slope. We use an unsupervised machine-learning technique based on the k-means clustering algorithm to solve a conundrum in GIS-based geomorphic analysis of rivers: the delineation of valley bottom segments of variable length. The delineation of valley bottom segments provides a coarse-scale entry point into automated geomorphic analysis and characterization of river systems. © 2020 John Wiley & Sons, Ltd.     

Observations of several characteristics of aeolian sand movement in the Taklimakan Desert

With both sides of the Taklimakan Desert highway line as the study area, three typical aeolian sand landforms, i.e. complex dune ridge, barchan dune and flat sand land, were selected as sand beds for the observation, analysis and research of the characteristics of aeolian sand movement such as aeolian sand stream structure, sand transport intensity, etc. in the Taklimakan Desert. The results show that there is a linear relation between the height and the log of sand transport rate over transverse dune chain, longitudinal dune ridge and flat sand land, i.e. the sand transport percentage decreases exponentially with increasing height. Sand transport rate within the 10 cm height above the bed surface accounts for 80%-95% of the total sand transport rate of the observed height (40 cm), while the sand transport rate in 20 cm occupies 98% of the total amount. Sand transport rate (g·cm-1·min-1) differs greatly with respect to different landform types and different topographic positions. Based on the investig     

Experimental study on the influence of river flow confluences on the open channel stage–discharge relationship

ABSTRACT

Accurate assessment of stage–discharge relationships in open channel flows is important to the design and management of hydraulic structures and engineering. Flow junctions commonly occur at the confluence of natural rivers or streams. The effect of flow junctions on the stage–discharge relationship at mountain river confluences was found by measuring velocity fields and water levels in experimental models. The results show that the backwater and accumulation–separation at flow junctions affect the flow structures and patterns in the channel; also, flow confluences may induce complex flow characteristics of backwater and flow separation at river junctions, indicating potential submerged flooding disasters within the confluence zone. The impacts of flow junctions on the stage–discharge relationship are investigated for two physical confluence models built from river confluence prototype systems in southwest China. The results show that the presence of tributary river inflows tends to increase the water level of the main river. This is important for flood control, flood-risk evaluation and engineering (e.g. hydropower station construction) in mountain rivers. Finally, a comparative quantitative analysis based on flow motion equations is conducted to evaluate the stage–discharge relationship in both uniform and regular confluence systems. The results indicate that more accurate prediction can be made when taking into account the flow non-uniformity induced by flow separation, backwater and distorted bed in the junction region.     

Convergent development of experimental landforms with differing rainfall and substrate properties

Four runs of experimental landform development, with the same uplift rate, different rainfall intensity, and the same material of different permeability adjusted by the degree of compaction, showed complicated effects of rainfall and mound-forming material. In the run with more rainfall on less permeable material, low separated ridges developed in the uplifted area, because abundant overland flow promoted valley erosion and slope processes from early stages. In the run with less rainfall on less permeable material, valley incision proceeded mostly in major valleys where surface water converges. Canyons developed during early stages and later a high massive mountain emerged. The effect of rainfall difference, however, appeared completely opposite on more permeable material accompanied by lower shear strength. In the run with more rainfall on more permeable material, a massive mountain similar to that with less rainfall on less permeable material appeared, and low separated ridges appeared in the run with less rainfall on more permeable material as in the run with more rainfall on less permeable material. In the former case, similar amount of water available for Hortonian overland flow in early stages estimated from rainfall rate and permeability can explain the development of similar landforms. In the latter case, while abundant surface water with more rainfall on less permeable material made fluvial erosion active from early stages, the deficiency in surface water with less rainfall on more permeable material apparently attenuated fluvial erosion but possibly accentuated slope processes and slope failures by seepage water flow through more permeable material of low shear strength. The active erosion from early stages apparently resulted in the development of enduring similar low landforms later in the dynamic equilibrium stage. These experimental results indicate that similar landforms can emerge from different environmental and lithologic controls, and that process does not necessarily follow from form.