Evidence for hydrothermal venting and sediment volcanism discharged after recent short-lived volcanic eruptions at Deception Island,Bransfield Strait,Antarctica

The results of a combined geophysical and geochemical research programme on Deception Island, an active volcano at 62°43′S, 60°57′W in Bransfield Strait (Antarctica), are presented. Ultrahigh-resolution acoustic data obtained with a TOPAS (TOpographic PArameter Sonar) system and multibeam bathymetry (Simrad EM1000) allow a detailed analysis of submarine vents in Port Foster, the submerged caldera of Deception Island. The data show three different types of seafloor structures: low-relief mounds, high-relief mounds (‘wasp nest’-like) and spire-like structures. We interpret these structures as products of sediment volcanism and seeps caused by heating and boiling of pore fluids in gas-charged sediments, and related to recent short-lived volcanic events, possibly those that occurred in 1967, 1969 and 1970. In addition, subsurface vertical disturbed zones, formed by increased amplitude and phase-inverse reflectors beneath the mounds, suggest the presence of fluidised and brecciated sediments within hydrofracture systems. A key finding of this study is that there appears to be a close relationship between the submarine mounds detected by our ultrahigh-resolution seismic study, geochemical haloes, fault-pathways and present-day thermal anomalies in surface waters. We suggest that seafloor hydrofracture systems and subsurface pipes can be re-used as fluid migration pathways, resulting in hydrothermal seeps and vents on the seafloor, possibly up to decades after coeval volcanic eruptions.     

Characterizing the thermal regime of cold vents at the northern Cascadia margin from bottom-simulating reflector distributions, heat-probe measurements and borehole temperature data

Several cold vents are observed at the northern Cascadia margin offshore Vancouver Island in a 10 km² region around Integrated Ocean Drilling Program Expedition 311 Site U1328. All vents are linked to fault systems that provide pathways for upward migrating fluids and at three vents methane plumes were detected acoustically in the water column. Downhole temperature measurements at Site U1328 revealed a geothermal gradient of 0.056 ± 0.004°C/m. With the measured in situ pore-water salinities the base of methane hydrate stability is predicted at 218–245 meters below seafloor. Heat-probe measurements conducted across Site U1328 and other nearby vents showed an average thermal gradient of 0.054 ± 0.004°C/m. Assuming that the bottom-simulating reflector (BSR) marks the base of the gas hydrate stability zone variations in BSR depths were used to investigate the linkages between the base of the gas hydrate stability zone and fluid migration. Variations in BSR depth can be attributed to lithology-related velocity changes or variations of in situ pore-fluid compositions. Prominent BSR depressions and reduced heat flow are seen below topographic highs, but only a portion of the heat flow reduction can be due to topography-linked cooling. More than half of the reduction may be due to thrust faulting or to pore-water freshening. Distinct changes in BSR depth below seafloor are observed at all cold vents studied and some portion of the observed decrease in the BSR depth was attributed to fault-related upwelling of warmer fluids. The observed decrease in BSR depth below seafloor underneath the vents ranges between 7 and 24 m (equivalent to temperature shifts of 0.07–0.15°C).     

Newly discovered hydrothermal fields along the ultraslow-spreading Southwest Indian Ridge around 63°E

The ultraslow-spreading Southwest Indian Ridge(SWIR) to the east of the Melville fracture zone is characterized by very low melt supply and intensive tectonic activity. Due to its weak thermal budget and extremely slow spreading rate, the easternmost SWIR was considered to be devoid of hydrothermal activity until the discovery of the inactive Mt. Jourdanne hydrothermal field(27°51′S, 63°56′E) in 1998. During the COMRA DY115-20 cruise in2009, two additional hydrothermal fields(i.e., the Tiancheng(27°51′S, 63°55′E) and Tianzuo(27°57′S, 63°32′E)fields) were discovered. Further detailed investigations of these two hydrothermal sites were conducted by Chinese manned submersible Jiaolong in 2014–2015. The Tiancheng filed can be characterized as a lowtemperature(up to 13.2°C) diffuse flow hydrothermal field, and is hosted by fractured basalts with hydrothermal fauna widespread on the seafloor. The Tianzuo hydrothermal field is an inactive sulfide field, which is hosted by ultramafic rocks and controlled by detachment fault. The discovery of the three hydrothermal fields around Segment #11 which receives more melt than the regional average, provided evidence for local enhanced magmatism providing heat source to drive hydrothermal circulation. We further imply that hydrothermal activity and sulfide deposits may be rather promising along the easternmost SWIR.     

Behavior of rare earth elements in coexisting manganese macronodules,micronodules, and sediments from the central Indian basin

Distribution characteristics of cobalt‐rich manganese deposits were evaluated from stereo photographs and video data on a seamount in the central Pacific Ocean by image analysis, photogrammetric technique, and visual observations. The results show that many locations have high crust coverages with highly undulating micro‐topography. High nodule coverages occur on relatively flat seafloor, and the nodule size distribution varies from uniform to inhomogeneous among different locations. Distribution of these deposits along detailed topographic sections show that the seafloor can be divided into nodule dominant zones between 0° and 3° slopes, with sediment patches up to 4° slopes; and crust dominant zones, which occur on slopes higher than 15°. The transition zone, between 4° and 15° slopes, has many locations, where nodules and crusts co‐occur in varying percentages. The observation of crust outcrops among sediments and nodules, as well as in the gravity core samples, indicates the presence of shallow buried crusts as well, which can substantially enhance resource evaluation of the deposits.     

Discovery of a new hydrothermal vent based on an underwater,high-resolution geophysical survey

A new hydrothermal vent site in the Southern Mariana Trough has been discovered using acoustic and magnetic surveys conducted by the Japan Agency for Marine-Earth Science and Technology's (JAMSTEC) autonomous underwater vehicle (AUV), Urashima. The high-resolution magnetic survey, part of a near-bottom geophysical mapping around a previously known hydrothermal vent site, the Pika site, during the YK09-08 cruise in June–July 2009, found that a clear magnetization low extends ∼500 m north from the Pika site. Acoustic signals, suggesting hydrothermal plumes, and 10 m-scale chimney-like topographic highs were detected within this low magnetization zone by a 120 kHz side-scan sonar and a 400 kHz multibeam echo sounder. In order to confirm the seafloor sources of the geophysical signals, seafloor observations were carried out using the deep-sea manned submersible Shinkai 6500 during the YK 10-10 cruise in August 2010. This discovered a new hydrothermal vent site (12°55.30′N, 143°38.89′E; at a depth of 2922 m), which we have named the Urashima site. This hydrothermal vent site covers an area of approximately 300 m×300 m and consists of black and clear smoker chimneys, brownish-colored shimmering chimneys, and inactive chimneys. All of the fluids sampled from the Urashima and Pika sites have chlorinity greater than local ambient seawater, suggesting subseafloor phase separation or leaching from rocks in the hydrothermal reaction zone. End-member compositions of the Urashima and Pika fluids suggest that fluids from two different sources feed the two sites, even though they are located on the same knoll and separated by only ∼500 m. We demonstrate that investigations on hydrothermal vent sites located in close proximity to one another can provide important insights into subseafloor hydrothermal fluid flow, and also that, while such hydrothermal sites are difficult to detect by conventional plume survey methods, high-resolution underwater geophysical surveys provide an effective means.     

An Angus/Argo study of the neovolcanic zone along the East Pacific rise from the Clipperton fracture zone to 12°N

Still photographs and video images collected along the Neovolcanic Zone of the East Pacific Rise from 10°15′N to 11°53′N show that recent volcanic sheet flows, possibly less than 100 years old, are superimposed on an older sediment-laden pillow terrane. This recent activity is restricted to a narrow zone that crosses two topographic highs at 10°55′N and 11°26′N and diminishes along-axis away from these highs. The association of recent sheet flows with older flows and collapse structures on the overlapping spreading centers at 11°45′N supports the evolutionary model for the occurrence and evolution of overlapping spreading centers by MacDonald and others (1986, 1988).     

Multiple resolution seismic imaging of a shallow hydrocarbon plumbing system,Woolsey Mound,Northern Gulf of Mexico

The northern Gulf of Mexico is dominated by salt tectonics, resulting fracturing and numerous seafloor seeps and vents. Woolsey Mound, site of the Gulf of Mexico Hydrates Research Consortium's seafloor observatory, has been investigated extensively via surveys, direct sampling and seafloor instrument systems. This study presents an innovative approach to seismic data interpretation, integrating three different resolution datasets and maximizing seismic coverage of the complex natural hydrocarbon plumbing system at Woolsey Mound.3D industry seismic data reveal the presence of a salt body at in the shallow subsurface that has generated an extended network of faults, some extending from the salt body to the seafloor (master faults). Higher resolution seismic data show acoustic wipe-out zones along the master faults with expulsion features – seafloor pockmarks and craters – located immediately above them and associated, in the subsurface, with high-amplitude, negative anomalies at constant depth of 0.2 s TWTT b.s.f., interpreted as free gas. Since pockmarks and craters provide pathways for hydrocarbons to escape from depth into the water column, related sub-surface seismic anomalies may indicate free gas at the base of the gas hydrates stability zone (GHSZ). Fluid flow and gas hydrates formation are segmented laterally along faults. Gas hydrates formation and dissociation vary temporally in the vicinity of active faults, and can temporarily seal them as conduits for thermogenic fluids. Periodic migrations of gases and other fluids may perturb the GHSZ in terms of temperature and pressure, producing the observed lack of classical BSRs.     

Definition of the plate boundary along the East Pacific Rise off Mexico

Tectonic and volcanic activity along the East Pacific Rise near Lat. 21°N is generally restricted to a 3–4‐km‐wide area centered over the rise axis. The East Pacific Rise is a medium‐rate (60 mm/yr) spreading center characterized by modest (100–200 m) relief of hills and seapeaks across the crestal region that is typical for such spreading centers. Few tectonic features appear in an axial volcanic zone 600–1, 200 m wide characterized by fresh, glassy pillow basalt and little or no sediment cover. This volcanic terrain is commonly flanked by tectonic zones where older lavas are cut by numerous normal faults bounding horst and graben systems and open fissures; these tectonic zones are commonly of unequal width on each side of the central volcanic zone and locally may be absent on one side. Bottom photographs and visual observations from a manned submersible indicate that most faults and fissures in the tectonic zones are young. Farther than 2 or 3 km from the axial volcanic zone, recent tectonic activity appears limited to a few faults that bound linear abyssal hills with total offset, suggesting relatively minor extension, so that instrumentation to measure the rate of plate separation along the rise crest will have to span both the volcanic and tectonic zones. The total width of the active plate boundary is at least 20 km, although less than 10% of the separation of the oceanic plates is accounted for by fault displacement and open fissures observed in the tectonic zones and on adjacent rise flanks. The asymmetric widths of the extensional tectonic zones result from migration of the volcanic extrusive zone over time.     

大洋岩石圈俯冲过程中流体活动的岩石地球化学记录:以中国西南天山(超)高压变质带为例

大洋岩石圈俯冲变质作用直接影响俯冲带岩浆作用和地幔组成的不均一性。近年的研究发现,大洋岩石圈俯冲变质作用非常复杂。本研究以采自西南天山富含脉体的变质岩样品为例来探讨大洋岩石圈俯冲作用过程中流体对元素地球化学行为的影响。根据岩石学特征,将该样品分为三部分:榴辉岩部分、退变蓝片岩部分和脉体。脉体以绿辉石为主、并普遍含有碳酸盐矿物和磷灰石,反映该样品经历过榴辉岩相变质条件下富CO_2、P和卤族元素的流体改造。样品的全岩Lu-Hf等时线年龄为332±24 Ma,这与前人用SHRIMPU-Pb锆石定年等方法得到的西天山峰期变质年龄一致。这三部分样品的全岩Th-U-Nb-Ta-Zr-Hf、稀土元素等不易迁移元素的配分模式均类似于洋岛玄武岩(OIB)的特征,表明其原岩与OIB类似。这三部分样品的K、Rb、Cs、Ba等元素相对亏损,且含量变化较大,在蓝片岩部分的含量明显高于榴辉岩部分,表现了这些元素的活动性。另外,白云母中富集Rb、Cs、Ba元素,以及K和Rb、Cs、Ba之间很好的相关性体现了白云母的存在对这些元素的控制作用。这些岩石样品主要经历了两阶段变质作用,即榴辉岩化过程和不同程度水化作用改造。第一阶段中,K、Rb、Cs、Ba等水溶性元素丢失,而第二阶段中,外来流体造成水化作用改造,并使水化程度高的蓝片岩部分形成了大量白云母等含水矿物,使这些元素表现出再富集并得以保存。因此,如果白云母稳定存在,俯冲大洋岩石圈简单变质脱水则难以解释岛弧岩浆高K、Rb、Cs、Ba等水溶性元素特征。     

A geological transect across the crest of the East Pacific Rise at 21°N latitude made from the deep submersible ALVIN

This paper is a report of geological observations made using the submersible ALVIN on the crest of the East Pacific Rise near 21°N. The profile is 6 km long and crosses a 5–10 km wide plateau which rises 100 m±above the rise flanks. At the axis are exposed fresh glassy pillow lavas with no sediment accumulation in a region termed the neovolcanic zone. This zone is about one kilometer wide and includes elongate ridges of pillow lavas and seventeen hydrothermal vent fields in the study area. Outside the neovolcanic zone the seafloor is extensively fissured in another zone which is up to two kilometers wide. The neovolcanic zone and the fissured zone are included within a rift valley or graben about 3 to 5 km wide and 50 m±deep. This rift valley is asymmetrically located on the west side of the axial plateau; the neovolcanic zone in the study area is asymmetrically located on the east side of the rift graben. Fissured crust is not common outside the rift graben or in the neovolcanic zone; similarly, large throw faults such as those which form the edges of the graben are not found outside of it. These observations can be interpreted according to a volcanic-tectonic cycle in which volcanic eruptions and hydrothermal circulation are followed by a tectonic phase which includes fissuring and vertical movements. When a new cycle starts it may involve a lateral shift of the spreading axis. Lavas along the dive profile are suggested to be no older than a few thousand years based on sediment accumulation. In contrast, seafloor spreading rates here predict crust up to 10⁵ yr old. This observation suggests that lavas from the neovolcanic zone can spread laterally about a kilometer or more and overlap on older crust.     

On the distribution of isothermal layers in the vicinity of the shoal,Kokushô-sone

Data from XBT observations in the vicinity of the shoal, Kokushô-sone (30°00′N, 128°30′E) which is located in the current zone of the Kuroshio in the East China Sea, are analysed to show the distribution of isothermal layers. Isothermal layers are found in abundance in and near a cold water region along the slope of the shoal where the existence of upwelling is suggested. It is found that there is a good spatial correlation between the distribution of isothermal layers and that of cold waters along the slope, and that the distribution of isothermal layers is a helpful indicator for elucidating the nature of oceanic structures in the vicinity of the shoal.     

Rare earth element geochemistry of hydrothermal deposits from Southwest Indian Ridge

The REE compositions of hydrothermal deposits and basalt samples from the Southwest Indian Ridge (SWIR) were determined with ICP-MS.The results show that there are significant differences between different types of samples although all samples show relative LREE enrichment.The contents of REE in hydrothermal sulfides and alterated rocks samples are lower (from 7.036 × 10 6 to 23.660 × 10 6),while those in the white chimney deposits are relatively higher (ranging from 84.496 × 10 6 to 103.511 × 10 6).Both of them are lower than basalts.Chondrite-normalized REE distribution patterns show that sulfides and alterated rocks samples are characterized by significant positive Eu anomalies.On the contrary,white chimney deposits have obvious negative Eu anomalies,which may be caused by abundant calcite existing in the white chimney samples.Both the content and distribution pattern of REE in sulfides suggest that REE most possibly is originally derived from hydrothermal fluids,but influenced by the submarine reducing ore-forming environment,seawater convection,mineral compositions as well as the constraint of mineral crystallizations.     

Hydrothermal Vent Geology and Biology at Earth’s Fastest Spreading Rates

Earth’s fastest present seafloor spreading occurs along the East Pacific Rise near 31°–32° S. Two of the major hydrothermal plume areas discovered during a 1998 multidisciplinary geophysical/hydrothermal investigation of these mid-ocean ridge axes were explored during a 1999 Alvin expedition. Both occur in recently eruptive areas where shallow collapse structures mark the neovolcanic axis. The 31° S vent area occurs in a broad linear zone of collapses and fractures coalescing into an axial summit trough. The 32° S vent area has been volcanically repaved by a more recent eruption, with non-linear collapses that have not yet coalesced. Both sites occur in highly inflated areas, near local inflation peaks, which is the best segment-scale predictor of hydrothermal activity at these superfast spreading rates (150 mm/yr).     

Phase-reversed seabed reflections in seismic data: examples related to mud volcanoes from the South Caspian Sea

The sediment–water interface is usually marked by an increase in acoustic impedance and is therefore displayed in a seismic section as a positive polarity reflection. Here, we use the term “seabed phase reversal” to describe areas of seafloor which are instead expressed as a negative polarity reflection in seismic data. We describe in detail a number of examples of seafloor phase reversals and use a simple one-dimensional geophysical model to test the hypothesis that they are the result of the presence of gas within the seafloor sediment. Our examples are all related to seismically imaged mud volcanoes located within the South Caspian Sea. Sections of phase-reversed seafloor at the summit area of these volcanoes have been mapped to reveal the existence of seafloor mud pools (salses) and recently erupted mud flows which show a strong similarity to smaller-scale features at onshore volcanoes in Azerbaijan. Synthetic geophysical modelling indicates that under the physical conditions likely to occur when the seabed sediment is gas-bearing, the seafloor will be expressed as a strong negative polarity reflection. Unlike other indicators of seafloor gas, such as pockmarks, which merely record the transient expulsion of fluids from sedimentary basins, seafloor phase reversals indicate the presence of gas in marine sediment at the time of survey acquisition. They therefore are of significance to engineering and site survey operations as well as the identification of biological communities and gas flux calculations.     

Crustal structure and mantle transition zone thickness beneath a hydrothermal vent at the ultra-slow spreading Southwest Indian Ridge (49°39′E): a supplementary study based on passive seismic receiver functions

As a supplementary study, we used passive seismic data recorded by one ocean bottom seismometer (OBS) station (49°41.8′E) close to a hydrothermal vent (49°39′E) at the Southwest Indian Ridge to invert the crustal structure and mantle transition zone (MTZ) thickness by P-to-S receiver functions to investigate previous active seismic tomographic crustal models and determine the influence of the deep mantle thermal anomaly on seafloor hydrothermal venting at an ultra-slow spreading ridge. The new passive seismic S-wave model shows that the crust has a low velocity layer (2.6 km/s) from 4.0 to 6.0 km below the sea floor, which is interpreted as partial melting. We suggest that the Moho discontinuity at ~9.0 km is the bottom of a layer (2–3 km thick); the Moho (at depth of ~6–7 km), defined by active seismic P-wave models, is interpreted as a serpentinized front. The velocity spectrum stacking plot made from passive seismic data shows that the 410 discontinuity is depressed by ~15 km, the 660 discontinuity is elevated by ~18 km, and a positive thermal anomaly between 182 and 237 K is inferred.     

西南印度洋49°～56°E洋脊段的热液羽状流:来自深水中的氦同位素异常证据

海水中的氦同位素能对海底热液活动进行有效示踪。本文对在西南印度洋49°~56°E洋脊段采集的5条CTD拖曳剖面共14件深水样品进行了氦氖同位素分析。通过分析水体中存在的氦同位素异常,探讨调查区热液异常的特征和热液羽状流的分布。分析表明,5条CTD剖面均存在δ3He异常,其中CTD7-2(位置:37.927°S、49.412°E,水深2 140m,离底高度100m)的δ3He值最大,达到49.2%。根据δ3He分布特征,认为调查区内存在至少6处热液羽状流,其中37.927°S、49.412°E以西数千米范围内可能存在海底热液喷口。     

Heat flow in the southern Chile forearc controlled by large-scale tectonic processes

Between 33°S and 47°S, the southern Chile forearc is affected by the subduction of the aseismic Juan Fernandez Ridge, several major oceanic fracture zones on the subducting Nazca Plate, the active Chile Ridge spreading centre, and the underthrusting Antarctic Plate. The heat flow through the forearc was estimated using the depth of the bottom simulating reflector obtained from a comprehensive database of reflection seismic profiles. On the upper and middle continental slope along the whole forearc, heat flow is about 30–60 mW m^–2, a range of values common for the continental basement and overlying slope sediments. The actively deforming accretionary wedge on the lower slope, however, in places shows heat flow reaching about 90 mW m^–2. This indicates that advecting pore fluids from deeper in the subduction zone may transport a substantial part of the heat there. The large size of the anomalies suggests that fluid advection and outflow at the seafloor is overall diffuse, rather than being restricted to individual fault structures or mud volcanoes and mud mounds. One large area with very high heat flow is associated with a major tectonic feature. Thus, above the subducting Chile Ridge at 46°S, values of up to 280 mW m^–2 indicate that the overriding South American Plate is effectively heated by subjacent zero-age oceanic plate material.     

Two-stage influences of hydrothermal fluids on pumice near the Iheya North hydrothermal field,Okinawa Trough

Hydrothermal precipitates and hydrothermal alteration products could record important information about temporal variations of seafloor hydrothermal systems. Geochemistry, mineralogy, and microscopic features of three pumice samples (T3-1, T3-2, and T3-3) near the Iheya North hydrothermal field were analyzed in this article. The results show that T3-3 sample has undergone at least two-stage influences by hydrothermal fluids. In the first stage, pure amorphous silica from hydrothermal fluid precipitated in the vesicles of all three T3 samples as a result of conductive cooling and fluid–seawater mixing. The precipitation temperatures according to oxygen isotope thermometer are approximately 13–21°C. In the second stage, T3-3 pumice underwent low-temperature hydrothermal alteration, during which the amorphous silica precipitates were redissolved, together resulting in losses of FeO and SiO₂ and gains of MgO, Pb, Zn, and Cu. Furthermore, ferruginous filamentous silica, which might be related to activities of Fe-oxidizing bacteria, was formed in the altered pumice. The transformation from pure amorphous silica precipitation to redissolution of the silica in T3-3 pumice might indicate a rise of temperature and/or decrease in silica concentrations in hydrothermal fluids, implying a changing hydrothermal environment.     

Geological controls on focused fluid flow through the gas hydrate stability zone on the southern Hikurangi Margin of New Zealand, evidenced from multi-channel seismic data

Highly concentrated gas hydrate deposits are likely to be associated with geological features that promote increased fluid flux through the gas hydrate stability zone (GHSZ). We conduct conventional seismic processing techniques and full-waveform inversion methods on a multi-channel seismic line that was acquired over a 125 km transect of the southern Hikurangi Margin off the eastern coast of New Zealand’s North Island. Initial processing, employed with an emphasis on preservation of true amplitude information, was used to identify three sites where structures and stratal fabrics likely encourage focused fluid flow into and through the GHSZ. At two of the sites, Western Porangahau Trough and Eastern Porangahau Ridge, sub-vertical blanking zones occur in regions of intensely deformed sedimentary layering. It is interpreted that increased fluid flow occurs in these regions and that fluids may dissipate upwards and away from the deformed zone along layers that trend towards the seafloor. At Eastern Porangahau Ridge we also observe a coherent bottom simulating reflection (BSR) that increases markedly in intensity with proximity to the centre of the anticlinal ridge. 1D full-waveform inversions conducted at eight points along the BSR reveal much more pronounced low-velocity zones near the centre of the ridge, indicating a local increase in the flux of gas-charged fluids into the anticline. At another anticline, Western Porangahau Ridge, a dipping high-amplitude feature extends from the BSR upwards towards the seafloor within the regional GHSZ. 1D full-waveform inversions at this site reveal that the dipping feature is characterised by a high-velocity zone overlying a low-velocity zone, which we interpret as gas hydrates overlying free gas. These results support a previous interpretation that this high-amplitude feature represents a local “up-warping” of the base of hydrate stability in response to advective heat flow from upward migrating fluids. These three sites provide examples of geological frameworks that encourage prolific localised fluid flow into the hydrate system where it is likely that gas-charged fluids are converting to highly concentrated hydrate deposits.