Holocene faulting on a tectonic margin: Georgia Basin,British Columbia,Canada

Multibeam bathymetric data collected in the Strait of Georgia, British Columbia, have revealed two areas of seabed disturbance, interpreted to be faults. The easterly fault zone (Fraser Delta Fault) is demarked by a pockmark chain extending along strike of a southwesterly-dipping fault offset 1 km to the northeast and having a throw of over 50 m. The pockmarks occur in a region of high sedimentation, located in the Fraser River prodelta. The eastern strait fault zone (Porlier Pass Fault) occurs within a fold of the Cretaceous Nanaimo Group. Here, a series of thrust faults displace sediments from Cretaceous to Holocene by up to 40 m with over 2 km of surface expression. Based on Holocene stratigraphic displacement in an area of significant sedimentation, these fault zones are considered to be active.     

Active tectonic morphology and submarine deformation of the northern Gulf of Eilat/Aqaba from analyses of multibeam data

A high-resolution marine geophysical study was conducted during October-November 2006 in the northern Gulf of Aqaba/Eilat, providing the first multibeam imaging of the seafloor across the entire gulf head spanning both Israeli and Jordanian territorial waters. Analyses of the seafloor morphology show that the gulf head can be subdivided into the Eilat and Aqaba subbasins separated by the north-south-trending Ayla high. The Aqaba submarine basin appears starved of sediment supply, apparently causing erosion and a landward retreat of the shelf edge. Along the eastern border of this subbasin, the shelf is largely absent and its margin is influenced by the Aqaba Fault zone that forms a steep slope partially covered by sedimentary fan deltas from the adjacent ephemeral drainages. The Eilat subbasin, west of the Ayla high, receives a large amount of sediment derived from the extensive drainage basins of the Arava Valley (Wadi ’Arabah) and Yutim River to the north–northeast. These sediments and those entering from canyons on the south-western border of this subbasin are transported to the deep basin by turbidity currents and gravity slides, forming the Arava submarine fan. Large detached blocks and collapsed walls of submarine canyons and the western gulf margin indicate that mass wasting may be triggered by seismic activity. Seafloor lineaments defined by slope gradient analyses suggest that the Eilat Canyon and the boundaries of the Ayla high align along north- to northwest-striking fault systems—the Evrona Fault zone to the west and the Ayla Fault zone to the east. The shelf–slope break that lies along the 100 m isobath in the Eilat subbasin, and shallower (70–80 m isobaths) in the Aqaba subbasin, is offset by approx. 150 m along the eastern edge of the Ayla high. This offset might be the result of horizontal and vertical movements along what we call the Ayla Fault on the east side of the structure. Remnants of two marine terraces at 100 m and approx. 150 m water depths line the southwest margin of the gulf. These terraces are truncated by faulting along their northern end. Fossil coral reefs, which have a similar morphological appearance to the present-day, basin margin reefs, crop out along these deeper submarine terraces and along the shelf–slope break. One fossil reef is exposed on the shelf across the Ayla high at about 60–63 m water depth but is either covered or eroded in the adjacent subbasins. The offshore extension of the Evrona Fault offsets a fossil reef along the shelf and extends south of the canyon to linear fractures on the deep basin floor.     

Investigation of Fethiye-Marmaris Bay (SW Anatolia): seismic and morphologic evidences from the missing link between the Pliny Trench and the Fethiye-Burdur Fault Zone

New (2009) multi-beam bathymetric and previously published seismic reflection data from the NE-SW-oriented Fethiye Bay and the neighboring N-S-oriented Marmaris Bay off SW Anatolia were evaluated in order to interpret the seafloor morphology in terms of the currently still active regional tectonic setting. This area lies between the Pliny Trench, which constitutes the eastern sector of the subduction zone between the African and Eurasian plates in the Eastern Mediterranean, and the Fethiye-Burdur Fault Zone of the Anatolian Plate. The bathymetric data document the very narrow shelf of the Anatolian coast, a submarine plain between the island of Rhodes and Marmaris Bay, and a large canyon connecting the abyssal floor of the Rhodes Basin with Fethiye Bay. The latter are here referred to as the Marmaris Plain and Fethiye Canyon, respectively. Several active and inactive faults have been identified. Inactive faults (faults f1) delineate a buried basin beneath the Marmaris Plain, here referred to as the Marmaris Basin. Other faults that affect all stratigraphic units are interpreted as being active. Of these, the NE-SW-oriented Marmaris Fault Zone located on the Marmaris Plain is interpreted as a transtensional fault zone in the seismic and bathymetric data. The transtensional character of this fault zone and associated normal faults (faults f3) on the Marmaris Plain correlates well with the Fethiye-Burdur Fault Zone on land. Another important fault zone (f4) occurs along the Fethiye Canyon, forming the northeastern extension of the Pliny Trench. The transpressional character of faults f4 inferred from the seismic data is well correlated with the compressional structures along the Pliny Trench in the Rhodes Basin and its vicinity. These observations suggest that the Marmaris Fault Zone and faults f3 have evolved independently of faults f4. The evidence for this missing link between the Pliny Trench and the Fethiye-Burdur Fault Zone implies possible kinematic problems in this tectonic zone that deserve further detailed studies. Notably, several active channels and submarine landslides interpreted as having been triggered by ongoing faulting attest to substantial present-day sediment transport from the coast into the Rhodes Basin.     

The role of the Spitsbergen shear zone in determining morphology,segmentation and evolution of the Knipovich Ridge

In 1989–1990 the SeaMARC II side-looking sonar and swath bathymetric system imaged more than 80 000 km² of the seafloor in the Norwegian-Greenland Sea and southern Arctic Ocean. One of our main goals was to investigate the morphotectonic evolution of the ultra-slow spreading Knipovich Ridge from its oblique (115° ) intersection with the Mohns Ridge in the south to its boundary with the Molloy Transform Fault in the north, and to determine whether or not the ancient Spitsbergen Shear Zone continued to play any involvement in the rise axis evolution and segmentation. Structural evidence for ongoing northward rift propagation of the Mohns Ridge into the ancient Spitsbergen Shear Zone (forming the Knipovich Ridge in the process) includes ancient deactivated and migrated transforms, subtle V-shaped-oriented flank faults which have their apex at the present day Molloy Transform, and rift related faults that extend north of the present Molloy Transform Fault. The Knipovich Ridge is segmented into distinct elongate basins; the bathymetric inverse of the very-slow spreading Reykjanes Ridge to the south. Three major fault directions are detected: the N-S oriented rift walls, the highly oblique en-echelon faults, which reside in the rift valley, and the structures, defining the orientation of many of the axial highs, which are oblique to both the rift walls and the faults in the axial rift valley. The segmentation of this slow spreading center is dominated by quasi stationary, focused magma centers creating (axial highs) located between long oblique rift basins. Present day segment discontinuities on the Knipovich Ridge are aligned along highly oblique, probably strike-slip faults, which could have been created in response to rotating shear couples within zones of transtension across the multiple faults of the Spitsbergen Shear Zone. Fault interaction between major strike slip shears may have lead to the formation of en-echelon pull apart basins. The curved stress trajectories create arcuate faults and subsiding elongate basins while focusing most of the volcanism through the boundary faults. As a result, the Knipovich Ridge is characterized by Underlapping magma centers, with long oblique rifts. This style of basin-dominated segmentation probably evolved in a simple shear detachment fault environment which led to the extreme morphotectonic and geophysical asymmetries across the rise axis. The influence of the Spitsbergen Shear Zone on the evolution of the Knipovich Ridge is the primary reason that the segment discontinuities are predominantly volcanic. Fault orientation data suggest that different extension directions along the Knipovich Ridge and Mohns Ridge (280° vs. 330°, respectively) cause the crust on the western side of the intersection of these two ridges to buckle and uplift via compression as is evidenced by the uplifted western wall province and the large 60 mGal free air gravity anomalies in this area. In addition, the structural data suggest that the northwards propagation of the spreading center is ongoing and that a `normal' pure shear spreading regime has not evolved along this ridge. This revised version was published online in November 2006 with corrections to the Cover Date.     

Tracing the middle strand of the North Anatolian Fault Zone through the southern Sea of Marmara based on seismic reflection studies

We studied the active deformation zone of the middle strand of the North Anatolian Fault Zone through the southern part of the Sea of Marmara by means of high-resolution as well as deep seismic reflection data. Our main objective was to investigate the active deformation within the uppermost sedimentary layers at high resolution as well as deeper sedimentary layers, focusing on the tectonic and stratigraphic setting between Gemlik and Bandırma. The middle strand of the North Anatolian Fault reaching the Gulf of Gemlik is a main fault which has a lazy-S shape in the Gulf of Gemlik, and extends westwards to Bandırma as a main fault which is an E–W-trending single right-lateral fault controlling the zone along the Gemlik and Bandırma sub-basins. Small-scale faults, consistent with a dextral shear regime, are present in the vicinity of the main fault. Several oblique fault groups parallel to the main fault were detected. The deformation in the Gulf of Gemlik is characterized by a series of synthetic and antithetic faults emanating from the main fault. The boundary faults in the Gulf of Gemlik have a compressive component, which indicates the sill areas of the gulfs of Gemlik and Bandırma to be push-up structures. Four seismic stratigraphic units were identified in the sediments of the gulfs of Gemlik and Bandırma, providing evidence of tectonic influence. The present tectonic structure between Gemlik and Bandırma is not a pull-apart structure. The microseismic study in this area has shown that fault planes are either strike-slip or compressional, and that the stress tensor is compatible with pure strike-slip in the E–W fault system.     

Evolution history of transtensional pull-apart,oblique rift basin and its implication on hydrocarbon exploration: A case study from Sufyan Sub-basin,Muglad Basin,Sudan

Sufyan Sub-basin is an East-West trending Sub-basin located in the northwestern part of the Muglad Basin (Sudan), in the eastern extension of the West and Central Africa Rift System (WCARS). The trend of the Sufyan Sub-basin (E-W) is different from the general trend of Muglad Basin (NW-SE) and similar to Baggara basin in the west of Sudan and other basins in east Chad. The unique E-W trend, suggests that this Sub-basin originated by a mechanism different from Muglad Basin that is considered more extensional in origin. Five regional seismic lines are included to illustrate the structural and stratigraphic variation across the Sub-basin. Fault polygons maps for six horizons, four isopach maps, five cross-sections, and two associated kinematic models are presented in this study. Sufyan Sub-basin is characterized by rhombic geometry with three boundary faults; two of those faults exhibit dextral strike slip movement, with two depocenters at the western and eastern segments of the southern fault. Structural interpretation of Sufyan Sub-basin based on 2D seismic data highlights the style of strike-slip related structure. Negative flower structures, en-echelon faults, and rhombic geometry all suggest a significant component of a pull-apart transtensional movement in Sufyan Sub-basin. Other alternative scenarios for evolutionary history and the forming mechanism were introduced such as the oblique extension model. The Sufyan Sub-basin is believed to be highly affected by the Central African Shear Zone (CASZ). In this study, several transtension and oblique rift related features interpreted from Bouguer gravity map and seismic data are briefly described and illustrated. Based on this study, the favorable areas for hydrocarbon accumulation are the areas of flower structure and the areas that near to the two depocenters that controlled by the southern boundary fault.     

The western Svalbard margin (74°–80°N)

A regional study of the continental margin between the Senja and Molloy-Spitsbergen fracture zones reveals that the transition from continental to oceanic crust occurs in a narrow zone beneath the outer shelf and uppermost slope. The postulated continent-ocean boundary appears to be fault-related consisting of sheared and rifted segments. The marginal structures are compatible with a plate tectonic model in which the southern Greenland Sea opened along a northeasterly propagating plate boundary in the Eocene, whereas the northern Greenland Sea started opening in the early Oligocene. The main structure at the margin is the Hornsund Fault Zone which probably reflects an old zone of weakness rejuvenated in the Tertiary, first by shear and later by extensional movements. In the early Tertiary local transpressional and transtensional components along the plate boundary are associated with the Spitsbergen Orogeny, emplacement of belts of high-density oceanic crust and tectonism in the western Barents Sea. A complex volcanic rifted margin characterized by the Bjørnøya Marginal High links the predominantly sheared margin segments on either side. The main ridge-like segment of the Hovgaard Fracture Zone was originally part of the Spitsbergen margin. In a regional sense, the Hornsund Fault Zone demarcates the eastern boundary of the Tertiary sedimentary wedge which reaches a total thickness of more than 7 km. There appears to have been a considerable increase in deposition of sediments the last 5–6 my. Depocentres located seaward of the east-west fjord systems and submarine depressions indicate a relationship between late Cenozoic glaciations and high sedimentation rates.     

Seismic stratigraphy and structure of the Northland Plateau and the development of the Vening Meinesz transform margin,SW Pacific Ocean

The Northland Plateau and the Vening Meinesz “Fracture” Zone (VMFZ), separating southwest Pacific backarc basins from New Zealand Mesozoic crust, are investigated with new data. The 12–16 km thick Plateau comprises a volcanic outer plateau and an inner plateau sedimentary basin. The outer plateau has a positive magnetic anomaly like that of the Three Kings Ridge. A rift margin was found between the Three Kings Ridge and the South Fiji Basin. Beneath the inner plateau basin, is a thin body interpreted as allochthon and parautochthon, which probably includes basalt. The basin appears to have been created by Early Miocene mainly transtensive faulting, which closely followed obduction of the allochthon and was coeval with arc volcanism. VMFZ faulting was eventually concentrated along the edge of the continental shelf and upper slope. Consequently arc volcanoes in a chain dividing the inner and outer plateau are undeformed whereas volcanoes, in various stages of burial, within the basin and along the base of the upper slope are generally faulted. Deformed and flat-lying Lower Miocene volcanogenic sedimentary rocks are intimately associated with the volcanoes and the top of the allochthon; Middle Miocene to Recent units are, respectively, mildly deformed to flat-lying, calcareous and turbiditic. Many parts of the inner plateau basin were at or above sea level in the Early Miocene, apparently as isolated highs that later subsided differentially to 500–2,000 m below sea level. A mild, Middle Miocene compressive phase might correlate with events of the Reinga and Wanganella ridges to the west. Our results agree with both arc collision and arc unzipping regional kinematic models. We present a continental margin model that begins at the end of the obduction phase. Eastward rifting of the Norfolk Basin, orthogonal to the strike of the Norfolk and Three Kings ridges, caused the Northland Plateau to tear obliquely from the Reinga Ridge portion of the margin, initiating the inner plateau basin and the Cavalli core complex. Subsequent N115° extension and spreading parallel with the Cook Fracture Zone completed the southeastward translation of the Three Kings Ridge and Northland Plateau and further opened the inner plateau basin, leaving a complex dextral transform volcanic margin.     

红河活动断裂带在南海西北部的反映

红河断裂带是一条走滑的活动断裂带，它控制着南海西北部的构造活动，也控制着莺歌海盆地的形成和演化。根据南海西北部中穿过莺歌海盆地的地震剖面和历史资料进行解释，结果表明，莺歌海盆地的形成可分3个阶段：自50MaB．P．开始，沿红河断裂带的左旋错动和在印支地块的顺时针旋转的应力作用下，形成了莺歌海盆地的雏形；24MaB．P．之后在左旋压扭应力场作用下，形成了盆地西北部的反转构造；5MaB．P．之后发生了右旋错动，盆地内快速沉降，发育巨厚沉积层。根据盆地内最老和最新的沉积中心之间的距离，推测沿红河断裂带的左旋位错约200km。该断裂带发展到现代，其活动性大为减弱，曾发生10次小于5级地震。     

The antipodes fracture zone,a major structure of the south‐west pacific

The steep Antipodes Scarp, along the eastern boundary of the Campbell Plateau south‐east of New Zealand, is attributed to dextral tear‐faulting within a NE‐SW belt, the Antipodes Fracture Zone, which also truncates the eastern end of the Chatham Rise. A complementary zone of sinistral movement, the Waipounamu Fracture, separates the Campbell Plateau and Chatham Rise from mainland New Zealand.

The origin of these fracture zones is linked with that of the parallel Alpine Fault of South Island, and is related to a phase of NE‐SW crustal compression that dominated the New Zealand region during the Mesozoic era. It is suggested that this compression resulted from the north‐eastward “drift” of the Australian craton and the simultaneous elevation of the Darwin Rise in the central Pacific.     

Tectonic Significance of the Taitung Canyon, Huatung Basin, East of Taiwan

Since the beginning of formation of Proto-Taiwan, the subducting Philippine (PH) Sea plate has moved continuously through time in the N307° direction with respect to Eurasia (EU), tearing the EU plate. The subducting EU plate includes a continental part in the north and an oceanic part in the south. The boundary B between these two domains corresponds to the eastern prolongation of the northeastern South China Sea ocean-continent transition zone. In the Huatung Basin (east of Taiwan), the Taitung Canyon is N065° oriented and is close and parallel to B. Seismic profiles show that the southern flank of the canyon corresponds to a fault with a normal component of a few tens of meters in the sediments and possible dextral shearing. Several crustal earthquakes of magnitude >%6 are located beneath the trend of the Taitung Canyon and focal mechanisms suggest that the motion is right-lateral. Thus, faulting within the sedimentary sequence beneath the Taitung Canyon is a consequence of underlying dextral strike-slip crustal motions. As the continental part of the EU slab located north of B has been recently detached, some subsequent dextral strike-slip motion might be expected within the EU slab, along the ocean-continent transition zone, which is a potential zone of weakness. We suggest that the dextral strike-slip motion along the ocean-continent boundary of the EU slab might trigger the observed dextral strike-slip motion within the overlying PH Sea crust and the associated faulting within the sediments of the Huatung Basin, beneath the Taitung Canyon. An erratum to this article is available at .     

Morphologic and seismic features of the Gulf of Gökova, SW Anatolia: evidence of strike-slip faulting with compression in the Aegean extensional regime

Recently acquired (2005) multi-beam bathymetric and high-resolution seismic reflection data from the E–W-oriented Gulf of Gökova off SW Anatolia were evaluated in order to assess the uneven seafloor morphology and its evolution in terms of present-day active regional tectonics. Stratigraphically, the three identified seismic units, i.e., the basement, deltaic sediments deposited during Quaternary glacial periods, and modern gulf deposits, are consistent with those observed in previous studies. Structurally, the folds and faults with strike-slip and reverse components have been regionally mapped for the first time. Of these, NE–SW-oriented left-lateral strike-slip faults with compressional components forming the so-called Gökova Fault Zone intersect and displace two WNW–ESE-oriented submarine ridges and deep submarine plains. Thus, strike-slip faults are the youngest major structures in the gulf, and control present-day active tectonism. E–W-oriented folds on the inner and outer shelf, which are generally accompanied by reverse faults, delimit the margins of these submarine ridges, and deform the young basin deposits. These features also reveal the concomitant existence of a compressional tectonic regime. The compressional structures probably represent pressure ridges along left-lateral strike-slip fault segments. However, some E–W-oriented normal faults occur on the northwestern and partly also southern shelf, and along the borders of the adjacent deep submarine plains. They are intersected and displaced by the strike-slip faults. The lower seismicity along the normal faults relative to the NE–SW-oriented strike-slip faults suggests that the former are at present inactive or at least less active.     

Submarine structures in the Gulf of İzmit,based on multichannel seismic reflection and multibeam bathymetry

Multichannel seismic reflection and multi-beam bathymetry data were used to study the active tectonic and syn-tectonic stratigraphic setting of the Gulf of ?zmit in the Marmara Sea (Turkey). The gulf and its near surroundings are deformed by the northern strand of the dextral North Anatolian Fault. Three connected basins of the gulf, the western (Dar?ca), central (Karamürsel) and eastern (Gölcük) basins are formed by active faults, as observed in the stacked and migrated seismic sections, as well as the bathymetry map. The main branch and its surrounding sedimentary strata are confined by normal faults to the north and south. These normal faults converge at depth towards the main fault, forming a negative flower structure in the gulf. The average maximum sedimentation rate is 0.4 mm/year according to the three most recent seismo-stratigraphic units that are located to the south of the main fault branch within the central basin. A 20° south-dipping major discontinuity along the northern shoreline of the gulf represents the top of Paleozoic basement.     

Second-order ridge axis discontinuities in the south Atlantic: Morphology,structure, and evolution

Continuous along-axis Sea Beam coverage of the slow-intermediate spreading (34–38 mm yr⁻¹ full rate) southern Mid-Atlantic Ridge (25°–27°30′S and 31°–38° S) shows that the ridge axis is segmented by both rigid and non-rigid discontinuities. Following the model of Macdonald et al. (1988b), a hierarchy of four orders is proposed for ridge axis discontinuities based on a continuum of relative age and distance offset across the discontinuites. This paper discusses the characteristics associated with five second-order discontinuities found in the areas surveyed. First-order discontinuities represent rigid offsets, transform faults, whereas non-rigid discontinuities fall into the second, third and fourth orders. Like transform fault boundaries, second-order discontinuities have distinctive morphologic signatures both on and off-axis-discordant zones — and therefore are better defined than third- or fourth-order discontinuities. Second-order discontinuities are offsets that range in distance from less than 10 km to approximately 30 km and vary in age offset from 0.5 to approximately 2.0 m.y. The variable morphotectonic geometries associated with these discontinuities indicate that horizontal shear strains are accommodated by both extensional and strike-slip tectonism and that the geometries are unstable in time. Three characteristic geometries are recognized: (1)en echelon jog in the plate boundary where ridge axis tips overlap slightly, (2)en echelon jog in the plate boundary where ridge axes are separated by an extensional basin whose long axis is oriented parallel to the strike of the adjoining ridge axes, and (3) oblique offset characterized by a large extensional basin that is oriented approximately 45° to the strike of the ridge axes. In the case of the third type, evidence for short strands of strike-slip tectonism that link an obliquely oriented extensional basin flanking ridge tips is often apparent. Analysis of the detailed bathymetric and magnetic data collected over the second-order discontinuities and their off axis terrain out to 5–7 m.y. documents that second-order discontinuities can follow several evolutionary paths: they can evolve from transform fault boundaries through prolonged asymmetric spreading, they may migrate along strike leaving a V-shaped wake, and they may remain in approximately the same position but oscillate slightly back and forth. In addition, a small change in the pole of relative motion occurring 4–5 Ma is thought to have resulted in the initiation of at least one second-order discontinuity in the survey area. A geologic model is proposed which involves the interplay of lithospheric thickness, asymmetric spreading, temporal and spatial variability of along-axis magmatic input and changes in the poles of relative motion to explain the origin, morphology and evolution of second-order ridge axis discontinuities.     

Crustal structure and tectonic provinces of the Riiser-Larsen Sea area (East Antarctica): results of geophysical studies

About 16,000 km of multichannel seismic (MCS), gravity and magnetic data and 28 sonobuoys were acquired in the Riiser-Larsen Sea Basin and across the Gunnerus and Astrid Ridges, to study their crustal structure. The study area has contrasting basement morphologies and crustal thicknesses. The crust ranges in thickness from about 35 km under the Riiser-Larsen Sea shelf, 26–28 km under the Gunnerus Ridge, 12–17 km under the Astrid Ridge, and 9.5–10 km under the deep-water basin. A 50-km-wide block with increased density and magnetization is modeled from potential field data in the upper crust of the inshore zone and is interpreted as associated with emplacement of mafic intrusions into the continental margin of the southern Riiser-Larsen Sea. In addition to previously mapped seafloor spreading magnetic anomalies in the western Riiser-Larsen Sea, a linear succession from M2 to M16 is identified in the eastern Riiser-Larsen Sea. In the southwestern Riiser-Larsen Sea, a symmetric succession from M24B to 24n with the central anomaly M23 is recognized. This succession is obliquely truncated by younger lineation M22–M22n. It is proposed that seafloor spreading stopped at about M23 time and reoriented to the M22 opening direction. The seismic stratigraphy model of the Riiser-Larsen Sea includes five reflecting horizons that bound six seismic units. Ages of seismic units are determined from onlap geometry to magnetically dated oceanic basement and from tracing horizons to other parts of the southern Indian Ocean. The seaward edge of stretched and attenuated continental crust in the southern Riiser-Larsen Sea and the landward edge of unequivocal oceanic crust are mapped based on structural and geophysical characteristics. In the eastern Riiser-Larsen Sea the boundary between oceanic and stretched continental crust is better defined and is interpreted as a strike-slip fault lying along a sheared margin.     

Móron fault zone,north-central Venezuelan borderland: Identification,definition, and neotectonic character

Location of the southern Caribbean plate boundary has been hindered mainly because it is in large part submerged. Analysis of 28 acoustic reflection profiles along the north-central Venezuelan borderland, and a review of published data, suggest that this borderland is the site of a complex fault zone, formally defined as the Morón fault zone, which encompasses the nodal region of the Boconó-Oca-El Pilar fault system. The Morón fault zone consists of: (1) an eastward extension of the Oca-Chirinos fault zone at about 10° 50′ N latitude; (2) a probable eastward continuation of the Boconó-Morón faults along the Venezuelan coast, which splits into the Avila and Macuto faults, north and east of Caracas; (3) the Tacagua fault, which is a southeastward trending splinter fault of the Oca-Chirinos fault zone; (4) and the westward extension of the Cariaco pull-apart basin and the El Pilar fault zone. All of these faults and fault zones are active, as shown by offset sea bottom, offset Pleistocene-Holocene features, and seismicity. It is suggested that the Oca-Chirinos fault zone represents a formerly more active part of the plate boundary. Since the Late Tertiary (?) or Quaternary, the Boconó fault zone was incorporated into the plate boundary, and the northwestern block (Bonaire block) was thrust northeastward over the Caribbean crust.     

Evidence of NW extension of the North Anatolian Fault Zone in the Marmara Sea: a new interpretation of the Marmara Sea (Izmit) earthquake on 17 August 1999

Active faults aligning in NW–SE direction and forming flower structures of strike-slip faults were observed in shallow seismic data from the shelf offshore of Avcılar in the northern Marmara Sea. By following the parallel drainage pattern and scarps, these faults were traced as NW–SE-directed lineaments in the morphology of the northern onshore sector of the Marmara Sea (eastern Thrace Peninsula). Right-lateral displacements in two watersheds of drainage and on the coast of the Marmara Sea and Black Sea are associated with these lineaments. This right-lateral displacement along the course of these faults suggests a new, active strike-slip fault zone located at the NW extension of the northern boundary fault of the ?ınarcık Basin in the Marmara Sea. This new fault zone is interpreted as the NW extension of the northern branch of the North Anatolian Fault Zone (NAFZ), extending from the ?ınarcık Basin of the Marmara Sea to the Black Sea coast of the Thrace Peninsula, and passing through B üy ük ?ekmece and K ü ? ük ?ekmece lagoons. These data suggest that the rupture of the 17 August 1999 earthquake in the NAFZ may have extended through Avcılar. Indeed, Avcılar and İzmit, both located on the Marmara Sea coast along the rupture route, were strongly struck by the earthquake whereas the settlements between Avcılar and İzmit were much less affected. Therefore, this interpretation can explain the extraordinary damage in Avcılar, based on the newly discovered rupture of the NAFZ in the Marmara Sea. However, this suggestion needs to be confirmed by further seismological studies.     

Microearthquakes along the back-arc spreading system in the eastern Bismarck Sea

OBS’s were deployed for 26 to 29 days in the eastern Bismarck Sea to investigate the back-arc spreading. Hypocenters of 186 shallow earthquakes were determined using P- and S-waves from at least five stations. In the western survey area, a transform fault zone is marked by a linear micro-earthquake activity striking N65°W and less than 5 km wide. The predominant type of their focal mechanisms is strike-slip. In the eastern area, several intermittent zones of micro-earthquakes and their strike-slip type focal mechanisms suggest the location of short-length transform faults separating en-echelon spreading ridges.     

Microearthquakes along the back-arc spreading system in the eastern Bismarck Sea

OBS's were deployed for 26 to 29 days in the eastern Bismarck Sea to investigate the back-arc spreading. Hypocenters of 186 shallow earthquakes were determined using P- and S-waves from at least five stations. In the western survey area, a transform fault zone is marked by a linear micro-earthquake activity striking N65°W and less than 5 km wide. The predominant type of their focal mechanisms is strike-slip. In the eastern area, several intermittent zones of micro-earthquakes and their strike-slip type focal mechanisms suggest the location of short-length transform faults separating en-echelon spreading ridges.     

Morpho-tectonic evolution of the Marmara Sea inferred from multi-beam bathymetric and seismic data

In an initial stage, the Sea of Marmara developed as a graben and, in due course, considerable volumes of sediments were deposited in this basin. Before 200 ka, a new fault (New Marmara Fault) cutting through the whole basin developed, which postdated large sub-marine land sliding in the western part of the basin. This mass movement created the Western Ridge. The initiation of this strike-slip fault indicates that the extensional stress regime was replaced by a new, shearing stress field. In the eastern part of the Marmara Basin, the New Marmara Fault consists of two branches. The northern one replaces the normal faulting at the bottom of the northeastern slope of the basin. As a result, this slope has been rejuvenated. The southern branch is located along the central axis of the basin, forming the major extension of the North Anatolian Fault Zone within the region. Two restraining bends were formed because of the counterclockwise rotation of that part of the Anatolian Block. This resulted the uplifting of the Eastern Ridge and the formation of the positive flower structure within the Tekirdag Basin. The establishment of the compressional regime around the Sea of Marmara also resulted in the northwest–southeast shortening of the initial Marmara Basin.