Evaluation of seismic hazard at Roermond, The Netherlands: A comparison of results after the 13 April 1992 earthquake

Mean return periods, RP, for the site of Roermond, The Netherlands, as calculated by different methods, are compared, and its quality evaluated by a simple two-tail test of hypothesis. Results show that RP values by the EGO-method are statistically more likely. They can be considered, despite their broad 90% probability intervals, and for the site and data used, more reliable, since the Roermond earthquake was not an unusual or surprising event for the Lower Rhine Embayment area, where earthquakes of comparable size have occurred since the 18th century.     

Time independent seismic hazard analysis in Alborz and surrounding area

The Bayesian probability estimation seems to have efficiencies that make it suitable for calculating different parameters of seismicity. Generally this method is able to combine prior information on seismicity while at the same time including statistical uncertainty associated with the estimation of the parameters used to quantify seismicity, in addition to the probabilistic uncertainties associated with the inherent randomness of earthquake occurrence. In this article a time-independent Bayesian approach, which yields the probability that a certain cut-off magnitude will be exceeded at certain time intervals is examined for the region of Alborz, Iran, in order to consider the following consequences for the city of Tehran. This area is located within the Alpine-Himalayan active mountain belt. Many active faults affect the Alborz, most of which are parallel to the range and accommodate the present day oblique convergence across it. Tehran, the capital of Iran, with millions of inhabitants is located near the foothills of the southern Central Alborz. This region has been affected several times by historical and recent earthquakes that confirm the importance of seismic hazard assessment through it. As the first step in this study an updated earthquake catalog is compiled for the Alborz. Then, by assuming a Poisson distribution for the number of earthquakes which occur at a certain time interval, the probabilistic earthquake occurrence is computed by the Bayesian approach. The highest probabilities are found for zone AA and the lowest probabilities for zones KD and CA, meanwhile the overall probability is high.     

Development of spectral hazard maps for a proposed revision of the Indonesian Seismic Building Code

The need to revise the current Indonesian Seismic Hazard Map contained in Indonesian Earthquake Resistant Building Code SNI 03-1726-2002 which partially adopts the concept of UBC 1997, was driven among others by the desire to better reflect the potential larger earthquake disasters faced by the nation in the future. The much larger than maximum predicted Aceh Earthquake (M _w 9.0–9.3) of 2004, followed by the destruction observed during the 2005 Nias Earthquake (M _w 8.7) urgently underline to need to consider the new conceptual approach and technological shift shown in the transition of UBC 1997 to IBC 2006. This paper presents research works for developing spectral hazard maps for Indonesia. Some improvements in seismic hazard analysis were implemented using recent seismic records. Seismic sources were modeled by background, fault, and subduction zones by considering a truncated exponential model, pure characteristic model or both models. A logic tree method was performed to account for the epistemic uncertainty and several attenuation functions were selected. Maps of PGA and spectral accelerations for a short period (0.2 s) and for a 1-s period were then developed using a probabilistic approach. The maps will be proposed as a revision for the current seismic hazard map in the Indonesian Seismic Building Code.     

Seismic hazard in Northern Algeria using spatially smoothed seismicity. Results for peak ground acceleration

Seismic hazard in terms of peak ground acceleration (PGA) has been evaluated in northern Algeria using spatially smoothed seismicity data. We present here a preliminary seismic zoning in northern Algeria as derived from the obtained results.Initially, we have compiled an earthquake catalog of the region taking data from several agencies. Afterwards, we have delimited seismic areas where the b and m_max parameters are different. Finally, by applying the methodology proposed by Frankel [Seismol. Res. Lett. 66 (1995) 8], and using four complete and Poissonian seismicity models, we are able to compute the seismic hazard maps in terms of PGA with 39.3% and 10% probability of exceedance in 50 years.A significant result of this work is the observation of mean PGA values of the order of 0.20 and 0.45 g, for return periods of 100 and 475 years, respectively, in the central area of the Tell Atlas.     

Assessment of earthquake hazard in Panama based on seismotectonic regionalization

Assessment of seismic hazard in Panama is made using a seismotectonic regionalization model. The coefficients of Gumbel's Type-I distribution are calculated and return periods for several magnitudes are found. From these coefficients intensities, peak ground acceleration and earthquake hazard for a set of return periods and epicentral distances are estimated and substantial variations in the probability of occurrence are noted. The Panama Fracture Zone (PFZ) and the Panama-South America Suture Zone (PSZ) provinces are the most active in producing earthquakes with a magnitude of about 7.0 in less than 16 yr. Magnitude 7.0 earthquakes in the Azuero province have a return period of about 160 yr, whereas in the Panama Deformed Belt (PDB) province the return period for magnitude 7.5 events is about 175 yr.     

Seismic hazard evaluation for dams in northern Colorado, U.S.A.

A seismic hazard evaluation for three dams in the Rocky Mountains of northern Colorado is based on a study of the historical seismicity. To model earthquake occurrence as a random process utilizing a maximum likelihood method, the catalog must exhibit random space-time characteristics. This was achieved using a declustering procedure and correction for completeness of recording. On the basis of the resulting a- and b-values, probabilistic epicentral distances for a 2 × 10^–5 annual probability were calculated. For a random earthquake of magnitude M _L 6.0–6.5, this distance is 15 km. Suggested ground motion parameters were estimated using a probabilistic seismic hazard analysis. Critical peak horizontal accelerations at the dams are 0.22g if median values are assumed and 0.39g if variable attenuation and seismicity rates are taken into account. For structural analysis of the dams, synthetic acceleration time series were calculated to match the empirical response spectra. In addition, existing horizontal strong motion records from two Mammoth Lakes, California earthquakes were selected and scaled to fit the target horizontal acceleration response spectra.     

Seismic hazard assessment using the theory of records

This article is a review of some basic results for analysis of records. First, the general methods appropriate for seismic hazard are discussed. Then, in view of the frequency-magnitude law of Gutenberg and Richter, some results relevant for hazard assessment related to earthquakes are presented. The discussion is concluded with an example of application and comparison with classical methods.     

Seismic hazard computations for regions with low earthquake activity — A case study for the Belgium,The Netherlands and NW Germany area

The algorithms to evaluate seismic hazard, used and/or developed by five teams participating in the TERESA project, applied to the low seismicity area Belgium, The Netherlands and NW Germany are compared. The main differences in the results can be explained by the majority criterion of Egozcue et al. (1989), the differences in the upper bound and zonification and, in some cases, by a higher attenuation.     

On the long-term seismic hazard analysis in the Zhangjiakou–Penglai seismotectonic zone, China

The Zhangjiakou–Penglai seismotectonic zone (ZPSZ) lies in the northern part of North China and extends along the Zhangjiakou–Beijing–Tianjin–Bohai Bay–Penglai–Yellow Sea. It is about 900 km long and some 250 km wide in a northwest direction. The great Sanhe-Pinggu (M_S=8.0) earthquake occurred on September 1679 and the Tangshan (M_S=7.8) earthquake on July 1976 caused serious economic and life losses. According to some differences in crust structure and regional tectonic stress field, the ZPSZ is divided into western and eastern segment by the 117°E line for study on long-term seismic hazard analysis. An analysis of Gutenberg–Richter's empirical relation of earthquake-frequency and time process of historic and recent earthquakes along the eastern and western segments shows that the earthquake activity obeys a Poisson process, and these calculations indicate that the earthquake occurrence probability of M_S=6.0–6.9 is 0.77–0.83 in the eastern segment and the earthquake occurrence probability of M_S=7.0–7.9 is 0.78–0.80 in the western segment of the ZPSZ during a period from 2005 to 2015.     

An estimate of probabilistic seismic hazard for five cities in Greece by using the parametric-historic procedure

A probabilistic procedure was applied to assess seismic hazard for the sites of five Greek cities (Athens, Heraklion, Patras, Thessaloniki and Volos) using peak ground acceleration as the hazard parameter. The methodology allows the use of either historical or instrumental data, or a combination of both. It has been developed specifically for the estimation of seismic hazard at a given site and does not require any specification of seismic sources or/and seismic zones. A new relation for the attenuation of peak ground acceleration was employed for the shallow seismicity in Greece. The computations involved the area- and site-specific parts. When assessing magnitude recurrence for the areas surrounding the five cities, the maximum magnitude, m_max, was estimated using a recently derived equation. The site-specific results were expressed as probabilities that a given peak ground acceleration value will be exceeded at least once during a time interval of 1, 50 and 100 years at the sites of the cities. They were based on the maximum peak ground acceleration values computed by assuming the occurrence of the strongest possible earthquake (of magnitude m_max) at a very short distance from the site and using the mean value obtained with the help of the attenuation law. This gave 0.24 g for Athens, 0.53 g for Heraklion (shallow) and 0.39 g Heraklion (intermediate-depth seismicity), 0.30 g for Patras, 0.35 g for Thessaloniki and 0.30 g for Volos. In addition, the probabilities of exceedance of the estimated maximum peak ground acceleration values were calculated for the sites. The standard deviation of the new Greek attenuation law demonstrates the uncertainty and large variation of predicted peak ground acceleration values.