Formation of Hengchun Accretionary Prism Turbidites and Implications for Deep‐water Transport Processes in the Northern South China Sea

Located at the end of the northern Manila Trench,the Hengchun Peninsula is the latest exposed part of Taiwan Island,and preserves a complete sequence of accretionary deep-sea turbidite sandstones.Combined with extensive field observations,a’source-to-sink’approach was employed to systematically analyze the formation and evolutionary process of the accretionary prism turbidites on the Hengchun Peninsula.Lying at the base of the Hengchun turbidites are abundant mafic normal oceanic crust gravels with a certain degree of roundness.The gravels with U-Pb ages ranging from 25.4 to23.6 Ma are underlain by hundreds-of-meters thickness of younger deep-sea sandstone turbidites with interbedded gravels.This indicates that large amounts of terrigenous materials from both the’Kontum-Ying-Qiong’River of Indochina and the Pearl River of South China were transported into the deep-water areas of the northern South China Sea during the late Miocene and further eastward in the form of turbidity currents.The turbidity flow drastically eroded and snatched mafic materials from the normal South China Sea oceanic crust along the way,and subsequently unloaded large bodies of basic gravel-bearing sandstones to form turbidites near the northern Manila Trench.With the Philippine Sea Plate drifting clockwise to the northwest,these turbidite successions eventually migrated and,since the Middle Pleistocene,were exposed as an accretionary prism on the Hengchun Peninsula.     

Coastal landscape evolution tracked from late Holocene wave-cut benches in the Sinan Archipelago,Southwest Korea

Glacio-isostatic adjustment(GIA)and tectonic activity are important factors in the formation of marine terraces.Late Holocene wave-cut benches in the eastern part of the West Sea of Korea,also called the Yellow Sea,can be divided into two steps:531 cm above sea level(ASL)for the upper bench(T2)and 464-481 cm ASL for the lower bench(T1).Sediments on the benches a re classified into four units,and are interpreted to be beach deposits acco rding to gravel shape,textu re,and seaward inclination.The ove rlying sediment indicates that T2 was formed at approximately 530 cm ASL before 2900 yr BP,and T1 at approximately 460-480 cm ASL before 1520 yr BP.Late Holocene(4000-2000 yr BP)relative sea level(RSL)curves based on GIA models are inconsistent with the wave-cut bench elevations.Comparing T1 and T2 benches to the RSL curves of the West Sea,the upper and the lower benches were uplifted by approximately 5-8 m and 4-7 m,respectively.Although the area is several hundred kilometers away from plate boundaries,the high frequency of earthquakes in the West Sea may have induced the uplift of wave-cut benches during the last 2000 years.These indicate that the west coast of the Korean Peninsula(KP)should no longer be considered an area of subsidence,but be assigned to a regime of uplift during the late Holocene.     

Metallogenic Epoch of Nonferrous Metallic and Silver Deposits in the Jiaodong Peninsula, China and its Geological Significance

As China's most important gold-producing district,the Jiaodong Peninsula also contains copper,lead-zinc,molybdenum(tungsten),and other nonferrous metal ore deposits,but the space-time and genetic relationships with gold deposits remain uncertain.To investigate the temporal relationship between these nonferrous metal and gold ore deposits,We collected the samples from a number of nonferrous metallic and silver deposits and metallogenetic rock bodies in the eastern Jiaodong Peninsula for isotopic dating.The results show that the Re-Os isotopic model ages of the Lengjia molybdenum deposit in Rongcheng range from 114.5± 1.8 Ma to 112.6± 1.5 Ma,with an average age of 113.6± 1.6Ma;the LA-ICP-MS ~(206)Pb/~(238)U ages of 33 zircons in the sericitization porphyritic monzogranite that hosts the Tongjiazhuang silver deposit in Rongcheng range between 122 Ma and 109 Ma,with a weighted mean age of 116.04± 0.95 Ma;the LA-ICP-MS ~(206)Pb/~(238)U ages of 31 zircons in the copper metallogenic pyroxene monzodiorite that hosts the Kuangbei copper deposit in Rongcheng range from126 Ma to 106 Ma,with a weighted mean age of 116.6± 1.7 Ma;and the LA-ICP-MS ~(206)Pb/~(238)U ages of19 zircons in the pyroxene monzodiorite surrounding the Dadengge gold and multimetal deposit in Weihai range from 113 Ma to 110 Ma,with a weighted mean age of 111.7± 0.6 Ma.All these results indicate that the metallogenic ages of the silver and nonferrous metallic deposits in the Jiaodong Peninsula are in a limited range from 118 Ma to 111 Ma.Previous studies have demonstrated that the isotopic ages of gold deposits in the Jiaodong Peninsula range from 123 Ma to 110 Ma,while Weideshanian magmatism occurred between 126 Ma to 108 Ma.Both these ranges are grossly consistent with the metallogenic ages of silver and nonferrous metallic deposits in this study,suggesting that the large-scale mineralization occurred in the Early Cretaceous when magmatic activities were strong.This epoch may be linked to the lithosphere thinning and the thermo-upwelling extension in eastern China at that time.In addition,field investigation also shows that gold and nonferrous metallic deposits are distributed nearby the Weideshanian granite,with the nonferrous metallic deposits lying within or surrounding the granite pluton and the gold deposits outside the granite pluton.We propose the following mineralization scenario:In the Early Cretaceous,an intensive lithospheric extension induced partial melting and degassing of the metasomatized lithospheric mantle,which resulted in the formation of mantle-derived fluids enriched in metal elements.During the rapid process of magma ascent and intrusion,crust-derived fluids were activated by the magmatic thermal dome and served to further extract ore-forming materials from the crust.These fluids may have mixed with the mantle-derived fluid to form a crust-mantle mixing-type ore-forming fluid.The high-temperature conditions in the center or in contact with the granitic magmatic thermal dome would have been favorable for the formation of porphyry-type,skarn-type,and hydrothermal-vein-type ores,thus forming a series of Mo(W),Cu,and Pb-Zn deposits in the mid-eastern Jiaodong Peninsula.In contrast,the medium-to low-temperature conditions in the periphery of the magmatic thermal dome would have favored the deposition of gold(silver) ores under the appropriate physiochemical and structural conditions.The metallogenic epoch of the molybdenum,copper,and silver deposits,and their spatio-temporal and genetic relations to the gold deposits,as demonstrated in this study,not only provide important insights to the study of regional metallogeny,our understanding of the metallogenesis of the Jiaodong type gold deposit,and the geodynamic background of the large-scale mineralization in the Jiaodong Peninsula,but also have practical value in guiding the mineral exploration.     

Discovery of the Archean Magmatic Cu-Ni Sulfide Deposit in China—Taoke Deposit,Shandong Province

The formation ages of global magmatic sulfide Ni-Cu deposits are from Archean to Mesozoic,the Neoarchean and Neoproterozoic are the two peaks.In China,the formation ages of magmatic sulfide deposits are from Proterozoic to Mesozoic,and the Neoproterozoic and late Paleozoic are the two peaks,.Compared with the global magmatic deposits,there is no case study of the Archean magmatic Ni-Cu sulfide deposits in China before.The nickel deposits formed in Neoproterozoic are located on the margin of the North China Block and Yangtze Block(e.g.Jinchuan,Dapoling),and those formed in the late Paleozoic are mainly distributed in the Central Asian Orogenic Belt(CAOB).Emeishan and Tarim Large Igneous Provinces(LIPs).such as Kalatongke,Yangliuping,and Pobei.     

Giant Mineral Deposits and Their Geodynamic Setting in the Lanping Basin, Yunnan, China

There are giant mineral deposits, including the Jinding Zn-Pb and Baiyangping Ag-Co-Cu, and otherimportant mineral deposits (e.g., Baiyangchang Ag-Cu, Jinman Cu deposits, etc.) in the Lanping Mesozoic-Cenozoic Basin, Yunnan Province, China. The tabular ore-bodies and some veins hosted in terrestrial clastic rocks of the Mesozoic-Cenozoic age and no outcropping of igneous rocks in the giant deposits lead to the proposal of syngenetic origin, but the giant mineral deposits are not stratabound (e.g. MVT, sandstone- and Sedex-type). They formed in a continental red basin with intense crust movement. The mineralization is controlled by structures and lithology and occurs in different strata, and no sedimentary nature and no exhalative sediments are identified in the deposits. The deposits show some relations with organic matter (now asphalt and petroleum) and evaporates (gypsum). The middle-low-temperature (mainly 110℃ to 280℃) mineralization took place at a depth of about 0.9 km to 3.1 km during the early     

A Preliminary Study of the Gas Hydrate Stability Zone in the South China Sea

Based on the analysis of sea-bottom temperature and geothermal gradient, and by means of the phase boundary curve of gas hydrate and the sea-bottom temperature versus water depth curve in the South China Sea, this paper studies the temperature and pressure conditions for gas hydrate to keep stable. In a marine environment, methane hydrate keeps stable at water depths greater than 550 m in the South China Sea. Further, the thickness of the gas hydrate stability zone in the South China Sea was calculated by using the phase boundary curve and temperature-depth equations. The result shows that gas hydrate have a better perspective in the southeast of the Dongsha Islands, the northeast of the Xisha Islands and the north of the Nansha Islands for thicker stability zones.     

Isotope Geochemistry of Gold Ore Deposits in the Gezhen Shear Zone, Qiongxi, Hainan Island

Gold deposits hosted in the Gezhen shear zone at Qingxi, Hainan Island occur in the Preeambrian metamorphic rock series and are regionally developed in the N-E direction along the tectonic zone. From northeast to southwest are distributed the Tuwaishan-Baoban gold mining district, the Erjia gold mining district and the Bumo gold mining district, making up the most industrially important gold metallogenesis zone on the Hainan Island. Isotope geochemical studies of the typical gold deposits in this metallogenesis zone indicate that their ore-forming materials stemmed largely from the Baoban Group migmatite series, though the involvement of some plutonic materials could not be ruled out. The ore fluids are the mixture of migrnatitized hydrothermal solutions and meteoric waters in addition to the involvement of local magmatic hydrothermal solutions. The superimposition of plutonie materials and magmatic hydrothermal solutions is controlled by the deformation environment of the shear zone and later magrnatic activities. Obvious variations are noticed in isotopic composition in the region studied, probably related to tectonic deformation, metamorphism and other evolutionary characteristics. This study is of great significance in understanding the relationship between the shear zone and gold metallogenesis,the rules of gold metallogenesis and gold ore prognosis.     

Petrogenesis and Dating of Two Types of Granite from North Qilian, China

1 IntroductionThree E-W-trending lithologic belts of the Paleozoic ageoccur in the eastern part of north Qilian. From north tosouth they are (a) the Huangyanghe-Gulang-Dajing-Beidengzi belt (the northern lithologic belt), (b) theLeigongshan-Maomaoshan-Laohushan belt (the middlelithologic belt) and (c) the Mayaxieshan-Shihuigou-Beiyinbelt (the southern lithologic belt) (Fig. 1). The rocks inthese belts are mainly Paleozoic volcanics and sandysiltstone. There are some Mesozoic and Cenozo…     

PHYSICAL ENRICHMENT--A NEW THEORY ON THE GENESIS OF INDUSTRIAL PHOSPHORITE DEPOSITS

Sedimentary mineral deposits were not formed simply as product of simplereactions through a single kind of factors,but were outputs of intricate reactionsamong a complex set of evolutionary natural environmental agents.They were formedat least through three different stages,viz.,the imbibition and concentration ofore forming materials;the geochemical enrichment;and the physical concentrationstages(Fig.1).As to industrial phosphorites,physical enrichmnt is of paramountimportance.It seems,almost all of the world industrial phosphorite deposits wereformed as such.Our idea of physical enrichment was first set up in 1980,during the 2ndNational Symposium on Mineral Deposits at Hongchow.Since then,lots of newevidences had been added up.In this paper,only those of phosphorite deposits are described.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Mountains,nations, parks,and conservation

Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km² and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world.     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

NEW SET OF LOW CONCENTRATION STANDARDS FOR LA, CE, SM, YB, LU, Y, SC, V, NB AND TA IN SILICATES

We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al₂O₃-SiO₂ ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses.