An analysis of the factors contributing to the settling potential of fine fluvial sediment

The settling potential of fine sediment is known to be influenced by particle size, shape, density and porosity, and is commonly predicted using Stokes's law, despite its known limitations for modelling the behaviour of natural particles. In order to develop an improved understanding of the potential for fine sediment to settle out of suspension or undergo transport by hydraulic processes, it is important to examine the role of particle structure in detail. In this study, stepwise regression was used to identify which structural properties of particles exert an important control on fine sediment behaviour in river systems. The presence of composite particles and their associated particle size, porosity and fractal dimension were shown to be the most important controls on settling potential. Composite particles that form in the aquatic environment (flocs) were shown to have significantly different form and behaviour from composite particles of terrestrial origin (aggregates). Importantly, it was demonstrated that particle structure and behaviour exhibited consistencies between contrasting river catchments in different locations. An understanding of the mechanisms responsible for the formation of composite particles is viewed as providing a valuable input to efforts to model the mobilisation, transport and fate of fine sediment. Copyright © 2008 John Wiley & Sons, Ltd.     

A MATHEMATICAL MODEL OF RESERVOIR SEDIMENTATION

1 INTRODUCTIONBed aggradation and degradation haPpen to be the most imPOrtant aspects of the alluvial processes instreams if the equilibrium conditions among water discharge, sediment flow, and channel shaPe areclistuIbed by natural or man-made factOfs, e.g., the constrUchon of a dam, change in the sediment suPplyrate, or base level changing. Reliable and quanhtative estimation of the bed aggradation or degradation isimPortant in rivertalning engineering and water management projects. …     

Fine sediment carrying capacity of combined wave and current flows

The so-called fine sediment in many coastal areas and estuaries in China is mostly referred to the mixture of cohesive sediment and non-cohesive sediment. To predict the mixed type time sediment transport, sediment carrying capacity formulae combined with the 2-D suspended sediment transport equation and morphologic equation have been widely used in China. In the present study, the sediment carrying capacity formula suggested by Dou et al. （1995） for wave conditions has been improved and implemented for the prediction of sediment transport in nearshore regions where wave activities are significant. The improvement is based on the wave energy dissipation principle inside and outside the surf zone. In the improved formula, sediment in suspension increases with the magnitude of the wave period and this feature complies with general observations. More than 300 laboratory and field measured data sets have been reviewed and 12 of them have been used to verify and determine the major coefficients in the improved formula. The application of the sediment carrying capacity model in combined wave and current situations shows that the model can faithfully reproduce the cross-shore sediment concentration distributions at the southwest coast of Bohai Bay.     

Significance of particle interaction to the modelling of cohesive sediment transport in rivers

Aggregation processes of fine sediments have rarely been integrated in numerical simulations of cohesive sediment transport in riverine systems. These processes, however, can significantly alter the hydrodynamic characteristics of suspended particulate matter (SPM), modifying the particle settling velocity, which is one of the most important parameters in modelling suspended sediment dynamics. The present paper presents data from field measurements and an approach to integrate particle aggregation in a hydrodynamic sediment transport model. The aggregation term used represents the interaction of multiple sediment classes (fractions) with corresponding multiple deposition behaviour. The k–ε–turbulence model was used to calculate the coefficient of vertical turbulent mixing needed for the two‐dimensional vertical‐plane simulations. The model has been applied to transport and deposition of tracer particles and natural SPM in a lake‐outlet lowland river (Spree River, Germany). The results of simulations were evaluated by comparison with field data obtained for two levels of river discharge. Experimental data for both discharge levels showed that under the prevailing uniform hydraulic conditions along the river reach, the settling velocity distribution did not change significantly downstream, whereas the amount of SPM declined. It was also shown that higher flow velocities (higher fluid shear) resulted in higher proportions of fast settling SPM fractions. We conclude that in accordance with the respective prevailing turbulence structures, typical aggregation mechanisms occur that continuously generate similar distribution patterns, including particles that settle toward the river bed and thus mainly contribute to the observed decline in the total SPM concentration. In order to determine time‐scales of aggregation and related mass fluxes between the settling velocity fractions, results of model simulations were fitted to experimental data for total SPM concentration and of settling velocity frequency distributions. The comparison with simulations for the case of non‐interacting fractions clearly demonstrated the practical significance of particle interaction for a more realistic modelling of cohesive sediment and contaminant transport. Copyright © 2004 John Wiley & Sons, Ltd.     

Morphodynamics and sediment dynamics on intertidal mudflats in China (1961–1994)

This paper presents an overview of the significant research on morphodynamics and sediment dynamics on intertidal mudflats in China (1961–1994), particularly in the past 15 years (1980–1994). Development of intertidal mudflats has long been regarded as the response of the intertidal profile to tides, waves and storms. It has been found that there were long-term and short-term cyclic developments of intertidal mudflats in China. Three sedimentological zones have generally been identified from land to sea within the intertidal zone: high mudflat, middle mudflat and low mudflat. In addition, the sediments in the middle mudflat are relatively coarser than those in the high mudflat and low mudflat. Storms have great impacts on the intertidal morphology, sediment textures and sedimentary structures. Based on field investigations of intertidal sedimentary processes, many researchers have found that “settling and scour lags” were only applicable to intertidal cohesive sediment transport during periods of weak waves, but not during storms. In fact, flood fronts, waves, storm surges and longshore drift play important roles in suspended sediment transport on open intertidal mudflats in China. Despite of these extensive studies in the past several decades, there is still a need for an improved understanding of fundamental physical and biological processes governing erosion and deposition of cohesive fine sediment within the intertidal zone in China.     

A one‐dimensional model for simulating armouring and erosion on hillslopes: 1. model development and event‐scale dynamics

This paper presents an erosion model, ARMOUR, which simulates time‐varying runoff, erosion, deposition and surface armour evolution down a hillslope either as a result of a single erosion event or as the cumulative impact of many events over periods up to decades. ARMOUR simulates sediment transport for both cohesive and non‐cohesive soil and dynamically differentiates between ‘transport‐limited’ and ‘source‐limited’ processes. A variety of feasible processes for entrainment of different size classes can be modelled and evaluated against data. The generalized likelihood of uncertainty estimation (GLUE) technique was used to calibrate and validate ARMOUR using data collected during rainfall simulator experiments at two contrasting sites: (1) non‐cohesive stony sediments at Ranger Uranium Mine, Northern Territory, Australia; and (2) cohesive silty sediments at Northparkes Gold Mine, NSW, Australia. The spatial and temporal variations of model predictions within the individual runoff events showed that some entrainment processes could not model the spikes in concentration and subsequent depletion, while the hiding model of Andrews and Parker best simulated the concentration trends for both calibrated and independent runoff events. ARMOUR also successfully captured the coarsening of the surface material, though small, over the duration of the rainfall simulator trials. This was driven by the depletion of the finest size class of the soil. For a constant discharge, ARMOUR simulated higher sediment flux at the start of the storm with the sediment flux and concentration diminishing with time. For natural rainfall a power law relationship between sediment flux and discharge was observed. The calibration exercise showed that sediment concentration and discharge alone are insufficient to calibrate all aspects of the physics, in particular the armour depth. This appears to be because the armouring during the short duration events is driven by depletion of the finest classes of the sediments (diameters less then 62·5 mm), which are not normally measured. Copyright © 2006 John Wiley & Sons, Ltd.     

Physical controls on the dynamics of inlet sandbar systems

Knowledge of the physical processes acting at inlet systems and their interaction with sediments and sediment bodies is important to the understanding of such environments. The objectives of this study are to identify and assess the relative importance of the controlling processes across the complex sandbar system at the Teign inlet (Teignmouth, UK) through the combined application of a numerical model, field data and Argus video images. This allows the determination of the regions dominated by wave processes or by tidal processes and definition of the variability of these regions under different wave, tide and river-discharge conditions. Modelling experiments carried out for one stage of the evolution of the system show that the interaction between tidal motion and waves generates complex circulation patterns that drive the local sediment transport and sandbar dynamics, producing a cyclic morphological behaviour of the sandbars that form the ebb-tidal delta. The relative importance of each physical process on the sediment transport and consequent morphodynamics varies across the region. The main inlet channel is dominated by tidal action that directs the sediment transport as a consequence of the varying tidal flow asymmetry, resulting in net offshore transport. Sediment transport over the shoals and secondary channels at both sides of the main channel is dominated by wave-related processes, displacing sediment in the onshore direction. The interaction between waves and tide-generated currents controls the transport over the submerged sandbar that defines the channels seaward extend. High river discharge events are also proven to be important in this region, as they can change sediment-transport patterns across the area.Responsible Editor: Iris Grabemann     

Comparing the behaviour of spherical beads and natural grains in bedload mixtures

It is common to use idealised materials to study the dynamics of granular transport in fluid flows, but the impact of this choice upon sediment behaviour has not been extensively explored. To tackle this research gap, two experiments were undertaken to explore the influence of a finer grain input to a channelized coarser granular flow driven by a shallow fluid flow. The first set of runs was undertaken using spherical glass beads, and the second set with natural fluvial sediment. The transport system approximates a narrow slice through the bedload at the bottom of a river. In the runs with natural grains, the infiltration of fine sediment into the bed was similar to the spherical glass beads, but with reduced infiltration capacity. We ascribe this behaviour to irregular and variable pore shapes and sizes in the natural material. The behaviour of the bedload in the natural material runs matched that of the bead runs only when the feed contained a high content of fines. When the feed contained a low content of fines the transport of natural grains was more complex, including the emergence of migrating collections of grains. However, the overall changes in bed and water slope due to the finer grain input were comparable in both sets of experiments. We conclude that artificial, idealised materials qualitatively represent sedimentary phenomena, but that quantitative differences in the outcomes must be expected. © 2020 John Wiley & Sons, Ltd.     

The settling dynamics of flocculating mud and sand mixtures: part 2—numerical modelling

Estuarine and coastal sediment transport is characterised by the transport of both sand-sized particles (of diameter greater than 63?μm) and muddy fine-grained sediments (silt, diameter less than 63?μm; clay, diameter less than 2?μm). These fractions are traditionally considered as non-cohesive and cohesive, respectively, because of the negligible physico-chemical attraction that occurs between sand grains. However, the flocculation of sediment particles is not only caused by physico-chemical attraction. Cohesivity of sediment is also caused by biology, in particular the sticky extra-cellular polymeric substances secreted by diatoms, and the effect of biology in binding sediment particles can be much larger than that of physico-chemical attraction. As demonstrated by Manning (2008) and further expanded in part 1 of this paper (Manning et al., submitted), the greater binding effect of biology allows sand particles to flocculate with mud. In many estuaries, both the sand and fine sediment fractions are transported in significant quantities. Many of the more common sediment transport modelling suites now have the capability to combine mud and sand transport. However, in all of these modelling approaches, the modelling of mixed sediment transport has still essentially separated the modelling of sand and mud fractions assuming that these different fractions do not interact except at the bed. However, the use of in situ video techniques has greatly enhanced the accuracy and reliability of settling velocity measurements and has led to a re-appraisal of this widely held assumption. Measurements of settling velocity in mixed sands presented by Manning et al. (2009) have shown strong evidence for the flocculation of mixed sediments, whilst the greater understanding of the role of biology in flocculation has identified mechanisms by which this mud-sand flocculation can occur. In the first part of this paper (Manning et al., submitted), the development of an empirical flocculation model is described which represents the interaction between sand and mud particles in the flocculation process. Measurements of the settling velocity of varying mud-sand mixtures are described, and empirical algorithms governing the variation of settling velocity with turbulence, suspended sediment concentration and mud-sand content are derived. The second part of this paper continues the theme of examination of the effects of mud-sand interaction on flocculation. A 1DV mixed transport model is developed and used to reproduce the vertical transport of mixed sediment fractions. The 1DV model is used to reproduce the measured settling velocities in the laboratory experiments described in the part 1 paper and also to reproduce measurements of concentration of mixed sediments in the Outer Thames. In both modelling exercises, the model is run using the algorithms developed in part 1 and repeated using an assumption of no interaction between mud and sand in the flocculation process. The results of the modelling show a significant improvement in the ability of the 1DV to reproduce the observed sediment behaviour when the empirical equations are used. This represents further strong evidence of the interaction between sand and mud in the flocculation process.     

High spatio-temporal resolution measurements of cohesive sediment erosion

In this study, we present a novel approach to measure fundamental processes of cohesive sediment erosion. The experimental setup consists of a laboratory erosion flume (SETEG) and a photogrammetric method to detect sediment erosion (PHOTOSED). Detailed data are presented for three erosion experiments, which were conducted with a natural non-cohesive/cohesive sediment mixture at increasing sediment depths (4, 8, 16 cm). In each experiment, the sediment was exposed to a set of incrementally increasing shear stresses and the erosion was measured dynamically, pixel-based, and approximate to the process scale given the resolution of PHOTOSED. This enables us to distinguish between (i) individual emerging erosion spots caused by surface erosion and (ii) large holes torn open by detached aggregate chunks. Moreover, interrelated processes were observed, such as (iii) propagation of the erosion in the longitudinal and lateral direction leading to merging of disconnected erosion areas and (iv) progressive vertical erosion of already affected areas. By complementing the (bulk) erosion volume profiles with additional quantitative variables, which contain spatial information (erosion area, specific deepening, number of disconnected erosion areas), conclusions on the erosion behaviour (and the dominant processes) can be drawn without requiring qualitative information (such as visual observations). In addition, we provide figures indicating the spatio-temporal erosion variability and the (bulk) erosion rates for selected time periods. We evaluate the variability by statistical quantities and show that significant erosion is mainly confined to only a few events during temporal progression, but then considerably exceeds the time-averaged median of the erosion (factors between 7.0 and 16.0). Further, we point to uncertainties in using (bulk) erosion rates to assess cohesive sediment erosion and particularly the underlying processes. As a whole, the results emphasise the need to measure cohesive sediment erosion with high spatio-temporal resolution to obtain reliable and robust information. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Changes to sediment sources following wildfire in a forested upland catchment,southeastern Australia

Few investigations link post‐fire changes to sediment sources and erosion processes with sediment yield response at the catchment scale. This linkage is essential if downstream impacts on sediment transport after fire are to be understood in the context of fire effects across different forest environments. In this study, we quantify changing source contributions to fine sediment (<63 µm) exported from a eucalypt forest catchment (136 ha) burnt by wildfire. The study catchment is one of a pair of research catchments located in the East Kiewa River valley in southeastern Australia that have been the subject of a research program investigating wildfire effects on runoff, erosion, and catchment sediment/nutrient exports. This previous research provided the opportunity to couple insights gained from a range of measurement techniques with the application of fallout radionuclides ¹³⁷Cs and ²¹⁰Pb_ex to trace sediment sources. It was found that hillslope surface erosion dominated exports throughout the 3·5‐year post‐fire measurement period. During this time there was a pronounced decline in the proportional surface contribution from close to 100% in the first six months to 58% in the fourth year after fire. Over the study period, hillslope surface sources accounted for 93% of the fine sediment yield from the burnt catchment. The largest decline in the hillslope contribution occurred between the first and second years after fire, which corresponded with the previously reported large decline in sediment yield, breakdown of water repellency in burnt soils, substantial reduction in hillslope erodibility, and rapid surface vegetation recovery. Coupling the information on sediment sources with hillslope process measurements indicated that only a small proportion of slopes contributed sediment to the catchment outlet, with material derived from near‐channel areas dominating the post‐fire catchment sediment yield response. Copyright © 2011 John Wiley & Sons, Ltd.     

Three-dimensional numerical modeling of cohesive sediment transport and wind wave impact in a shallow oxbow lake

It was observed that in some closed inland lakes sediment transport was dominated by wind-induced currents, and the sediment resuspension was primarily driven by wind-induced waves. This paper presents the development and application of a three-dimensional numerical model for simulating cohesive sediment transport in water bodies where wind-induced currents and waves are important. In the model, the bottom shear stresses induced by currents and waves were calculated, and the processes of resuspension (erosion), deposition, settling, etc. were considered. This model was first verified by a simple test case consisting of the movement of a non-conservative tracer in a prismatic channel with uniform flow, and the model output agreed well with the analytical solution. Then it was applied to Deep Hollow Lake, a small oxbow lake in Mississippi. Simulated sediment concentrations were compared with available field observations, with generally good agreement. The transport and resuspension processes of cohesive sediment due to wind-induced current and wave in Deep Hollow Lake were also discussed.     

Sedimentation processes in silt-rich sediment systems

Sediment found in China’s Yangtze and Yellow River systems is characterized by large silt fractions. In contrast to sand and clay, sedimentation and erosion behaviour of silt and silt–clay–sand mixtures is relatively unknown. Therefore, settling and consolidation behaviour of silt-rich sediment from these river systems is analysed under laboratory conditions in specially designed settling columns. Results show that a transition in consolidation behaviour occurs around clay contents of about 10 %, which is in analogy with the transition from non-cohesive to cohesive erosion behaviour. Above this threshold, sediment mixtures consolidate in a cohesive way, whereas for smaller clay percentages only weak cohesive behaviour occurs. The settling behaviour of silt-rich sediment is found to be in analogy with granular material at concentration below 150 g/l. Above 150–200 g/l, the material settles in a hindered settling regime where segregation is limited or even prevented. The results indicate that for modelling purposes, multiple sediment fractions need to be assessed in order to produce accurate modelling results.     

Insight into sediment transport processes on saline rangeland hillslopes using three‐dimensional soil microtopography changes

In arid and semi‐arid rangeland environments, an accurate understanding of runoff generation and sediment transport processes is key to developing effective management actions and addressing ecosystem response to changes. Yet, many primary processes (namely sheet and splash and concentrated flow erosion, as well as deposition) are still poorly understood due to a historic lack of measurement techniques capable of parsing total soil loss into these primary processes. Current knowledge gaps can be addressed by combining traditional erosion and runoff measurement techniques with image‐based three‐dimensional (3D) soil surface reconstructions. In this study, data (hydrology, erosion and high‐resolution surface microtopography changes) from rainfall simulation experiments on 24 plots in saline rangelands communities of the Upper Colorado River Basin were used to improve understanding on various sediment transport processes. A series of surface change metrics were developed to quantify and characterize various erosion and transport processes (e.g. plot‐wide versus concentrated flow detachment and deposition) and were related to hydrology and biotic and abiotic land surface characteristics. In general, erosivity controlled detachment and transport processes while factors modulating surface roughness such as vegetation controlled deposition. The extent of the channel network was a positive function of slope, discharge and vegetation. Vegetation may deflect runoff in many flow paths but promoted deposition. From a management perspective, this study suggests that effective runoff soil and salt load reduction strategies should aim to promote deposition of transported sediments rather than reducing detachment which might not be feasible in these resource‐limited environments. Copyright © 2016 John Wiley & Sons, Ltd.     

Infiltration of fine sediment into a coarse mobile bed: a phenomenological study

Experiments were undertaken to study the nature of granular interaction in running water by examining the influence of fine grain inputs to a coarser sediment bed with a mobile surface. Video recordings of grain sorting by both kinetic sieving and spontaneous percolation are used to diagnose the critical processes controlling the overall bed response. Kinetic sieving takes place in the mobile bed surface, with the finer sediment moving to the bottom of the bedload transport layer at the interface with the underlying quasi‐static coarse bed. We show that the behavior at this interface dictates how a channel responds to a fine sediment input. If, by spontaneous percolation, the fine sediment is able to infiltrate into the underlying quasi‐static bed, the total transport increases and the channel degrades. However, if the fine sediment input rate exceeds the transport capacity or is geometrically unable to infiltrate into the underlying bed, it forms a quasi‐static layer underneath the transport layer that inhibits entrainment from the underlying bed, resulting in aggradation and an increase in bed slope. Copyright © 2016 John Wiley & Sons, Ltd.     

Transport of moderately sorted gravel at low bed shear stresses: The role of fine sediment infiltration

A reliable estimation of sediment transport in gravel‐bed streams is important for various practical engineering and biological studies (e.g., channel stability design, bed degradation/aggradation, restoration of spawning habitat). In the present work, we report original laboratory experiments investigating the transport of gravel particles at low bed shear stresses. The laboratory tests were conducted under unsteady flow conditions inducing low bed shear stresses, with detailed monitoring of the bed topography using a laser scanner. Effects of bed surface arrangements were documented by testing loose and packed bed configurations. Effects of fine sediments were examined by testing beds with sand, artificial fine sand or cohesive silt infiltrated in the gravel matrix. Analysis of the experimental data revealed that the transport of gravel particles depends upon the bed arrangement, the bed material properties (e.g., size and shape, consolidation index, permeability) and the concentration of fine sediments within the surface layer of moving grains. This concentration is directly related to the distribution of fine particles within the gravel matrix (i.e., bottom‐up infiltration or bridging) and their transport mode (i.e., bedload or suspended load). Compared to loose beds, the mobility of gravel is reduced for packed beds and for beds clogged from the bottom up with cohesive fine sediments; in both cases, the bed shear stress for gravel entrainment increases by about 12%. On the other hand, the mobility of gravel increases significantly (bed shear stress for particle motion decreasing up to 40%) for beds clogged at the surface by non‐cohesive sand particles. Copyright © 2017 John Wiley & Sons, Ltd.     

Fine sediment delivery and transfer in lowland catchments: modelling suspended sediment concentrations in response to hydrological forcing

Fine sediment delivery to and storage in stream channel reaches can disrupt aquatic habitats, impact river hydromorphology, and transfer adsorbed nutrients and pollutants from catchment slopes to the fluvial system. This paper presents a modelling tool for simulating the time‐dependent response of the fine sediment system in catchments, using an integrated approach that incorporates both land phase and in‐stream processes of sediment generation, storage and transfer. The performance of the model is demonstrated by applying it to simulate in‐stream suspended sediment concentrations in two lowland catchments in southern England, the Enborne and the Lambourn, which exhibit contrasting hydrological and sediment responses due to differences in substrate permeability. The sediment model performs well in the Enborne catchment, where direct runoff events are frequent and peak suspended sediment concentrations can exceed 600 mg l^?1. The general trends in the in‐stream concentrations in the Lambourn catchment are also reproduced by the model, although the observed concentrations are low (rarely exceeding 50 mg l^?1) and the background variability in the concentrations is not fully characterized by the model. Direct runoff events are rare in this highly permeable catchment, resulting in a weak coupling between the sediment delivery system and the catchment hydrology. The generic performance of the model is also assessed using a generalized sensitivity analysis based on the parameter bounds identified in the catchment applications. Results indicate that the hydrological parameters contributing to the sediment response include those controlling (1) the partitioning of runoff between surface and soil zone flows and (2) the fractional loss of direct runoff volume prior to channel delivery. The principal sediment processes controlling model behaviour in the simulations are the transport capacity of direct runoff and the in‐stream generation, storage and release of the fine sediment fraction. The in‐stream processes appear to be important in maintaining the suspended sediment concentrations during low flows in the River Enborne and throughout much of the year in the River Lambourn. Copyright © 2007 John Wiley & Sons, Ltd.     

Properties of a cellular braided-stream model

We have shown in a previous paper that many of the main features of braided streams can be captured in a relatively simple cellular computer model. Here we examine some of the detailed characteristics of this model. We show the qualitative form of the braiding produced by the model is generally insensitive to changes in most of the numerical parameters used in the model. The most crucial parameter choice is the use of a non-linear exponent (>1) to describe the relation between sediment flux and local stream power. Use of water discharge instead of stream power to parameterize sediment flux produces braiding, but also unrealistically high-amplitude topography variations in the long term. Introduction of a threshold transport condition causes no noticeable change in the model's behaviour. Inclusion of lateral sediment transport due to gravitational effects on lateral slopes is not crucial to produce braiding, but is needed to provide reasonable lateral channel shifting, and to maintain a continuing dynamic behaviour. As long as lateral sediment transport is included, altering the initial topography for a run has no effect, other than a transient period of regrading. In addition, we show that there is a simple and apparently fundamental connection between braided-stream channel networks and erosional (dendritic) networks that has not been previously recognized. All that is needed to switch the model from braided to dendritic patterns is either to remove redeposition from the rules, simulating entrainment of cohesive sediment, or to add a cliff to the initial topography, making local redeposition unimportant. This result suggests that the presence or absence of significant local redeposition, which causes bar formation, channel division, and avulsion, determines whether a braided or dendritic pattern will form. © 1997 John Wiley & Sons, Ltd.