A simplified two-component model for the lateral growth of pahoehoe lobes

Unconfined pahoehoe lobes, composed of networks of numerous pahoehoe toes, often show a transverse profile with central thickening and crude bilateral symmetry. The overall widths of individual lobes are often relatively constant compared to the large diversity in widths of individual toes. These observations collectively suggest that there is a lateral self-confinement mechanism at the scale of a lobe. Although previous correlated random walk models successfully address the nature of this mechanism, the underlying physical processes are still not clearly understood. Here, we propose a simplified two-component model for the lateral self-confinement mechanism. The model assumes that the surface crust retains an inner hot core until its overpressure surpasses the strength of the crust. It also assumes that fracturing of the crust occurs at the top of the flow where the crust has the weakest strength, and then a breakout of the hot core spills out to form a new flow unit. Episodic fracturing and subsequent coalescence of multiple toes form a broad lobe, which is then considered theoretically to behave as a single large flow unit. Although simplified, the model can determine the inflated thickness necessary to fracture the crust and the width scale of the lateral spreading with a self-confinement effect. The model also provides theoretical support for the correlated random walk model for pahoehoe emplacement.     

Slabby pahoehoe from the western Deccan Volcanic Province: evidence for incipient pahoehoe–aa transitions

The pahoehoe–aa transition for a flow exposed near Bodshil village from the western part of the Deccan Volcanic Province (DVP) is reported for the first time. The 1-km-long Bodshil flow issued as a small sheet from a pre-existing lobe. Near the source, the crust is characterised by numerous squeeze-ups. A number of gaping fractures, parallel to sub-parallel to the flow direction, are exposed on the surface in the medial portion of the flow. About 800 m away, the flow completely transforms to slabby pahoehoe. The terminal portion of the flow is characterised by concentrations of slabs, blocks and lava balls. The size and concentrations of the slabs and lava balls appear to increase along the length of the flow. Petrographic studies reveal a dominant hypohyaline texture. The flow core is coarse and is characterised by plagioclase set in a glassy matrix. The presence of clinopyroxene in addition to plagioclase and glass distinguishes the crust and interslab crust from the core. On the basis of mineralogy, a temperature range of 1146±15°C to 1169±15°C is inferred for the Bodshil flow. Increased vesicle deformation across the transition is discernible and an average D-value of <0.4 indicates moderate strain rates during emplacement. In light of the morphology and petrography, the cooling history and the mode of emplacement of the Bodshil flow is discussed. The flow originated as a small toe at the leading edge of a pahoehoe flow, and grew into a sheet by the mechanism of inflation. Continuous inflation caused the brittle crust to uplift and produce a network of inflation clefts that were subsequently occupied by squeeze-ups. Temporary stagnation of the flow due to cessation of lava supply or storage allowed the crust to grow and thicken. Renewed movement of the stored and cooled lava to the flow front at a fairly high volumetric rate was responsible for the initial disruption of the crust. High rates of crustal disruption induced higher rates of degassing and cooling, which resulted in rapid crystallisation of the fluid core. Increase in crystallinity lead to the onset of yield strength, and it is envisaged that at least the terminal parts of the flow behaved as a Bingham fluid. The Bodshil flow is unique to the DVP because it is the first to record slabby pahoehoe and provide evidence for the incipient transformation of basaltic lava from pahoehoe to aa.     

Morphological and textural diversity of the Steens Basalt lava flows,Southeastern Oregon,USA: implications for emplacement style and nature of eruptive episodes

This study focuses on Middle Miocene tholeiitic flood basalt lava flows from the Oregon Plateau, northwestern USA (Steens Basalt), and is the first to comprehensively document and evaluate their morphology. Field observations of flows from several sections within and proximal to the main exposures at Steens Mountain have been supplemented with textural and geochemical data, and are used to offer preliminary insights into their emplacement. Compound pahoehoe flows of variable thickness appear to be common throughout the study area, laterally and vertically. These tend to be plagioclase phyric and the morphology and disposition of constituent flow lobes are quite similar to those from other provinces such as Hawaii and the Snake River Plain. Classic a’a flows with brecciated upper and basal crusts are not abundant, but by no means uncommon. Flows with characters different from typical pahoehoe and a’a are also common. Such flows display a range in morphology; flows with preserved upper crusts but brecciated basal crusts, as well as those displaying well-developed flow-top breccias and preserved basal crusts (rubbly pahoehoe) are observed. The Steens Basalt appears to display greater morphological and textural diversity at the outcrop scale than that described for some other flood basalt provinces. The abundant compound pahoehoe flows (often rich in plagioclase phenocrysts) were likely emplaced during slow but sustained eruptive episodes; their constituent lobes show clear evidence for endogenous growth. The relatively aphyric flows with brecciated surfaces (including a’a) hint at higher strain rates and/or higher viscosity, probably caused by higher effusion rates. A couple of sections are characterized by compositionally similar, but morphologically different flows that were possibly part of the same eruption. While differences in pre-eruptive topography could explain this, it is also possible that certain physical parameters changed substantially and abruptly during eruption and that such changes were accompanied by differentiation processes within the plumbing system. It is possible that such observations indicate temporal fluctuations within complex magmatic and eruptive systems, and deserve closer scrutiny.     

Emplacement and inflation of natrocarbonatitic lava flows during the March–April 2006 eruption of Oldoinyo Lengai,Tanzania

The most voluminous eruption of natrocarbonatite lava hitherto recorded on Earth occurred at Oldoinyo Lengai in March–April 2006. The lava flows produced in this eruption range from blocky 'a'a type to smooth-surfaced inflated pahoehoe. We measured lava inflation features (i.e. one tumulus and three pressure ridges) that formed in the various pahoehoe flows emplaced in this event. The inflation features within the main crater of Oldoinyo Lengai are relatively small-scale, measuring 1-5 m in width, 2.5–24.4 m in length and with inflation clefts less than 0.4 m deep. Their small sizes are in contrast to a tumulus that formed on the northwestern slope of the volcano (situated ~1140 m below the crater floor). The tumulus is roughly circular, measures 17.5 × 16.0 m, and is cut by a 4.4 m deep axial inflation cleft exposing two separate flow units. We measured the elastic properties (i.e. shear- and bulk moduli) of natrocarbonatitic crust and find that these are similar to those reported for basaltic crust, and that there is no direct correlation between magmastatic head and pressure required to form tumuli. All inflated flows in the 2006 event were confined by lateral barriers (main crater, erosional channel or erosional gully) suggesting that the two most important factors for endogenous growth in natrocarbonatitic lava flows are (1) lateral barriers that prevent widening of the flow, and (2) influx of new material beneath the viscoelastic and brittle crust.     

Tumuli and associated features from the western Deccan Volcanic Province, India

Whale-back-shaped uplifts called "tumuli" are common in the pahoehoe flows of the western Deccan Volcanic Province (DVP). Although they usually occur in hummocky flows, they are also associated with thicker sheet lobes. They have been subjected to a detailed morphometric and petrographic study for the first time. The tumuli are characterised by positive relief and "lava-inflation clefts" occupied by squeeze-ups. They display elongate as well as equant forms; some are constituted of a single flow lobe, whereas others display multiple flow lobes. Some tumuli appear to have developed along anastomosing tube systems. The detailed study of one of the tumuli reveals considerable petrographic and textural variations among the constituent flow units. Some of these, such as the enrichment of phenocrysts in squeeze-ups and breakouts, could be related to the emplacement dynamics of the tumulus. All the observed tumuli display much evidence of inflation or endogenous growth. Field observations and measurements reveal that the tumuli and associated pahoehoe features display a close similarity with their Hawaiian counterparts. This is a very significant observation since it points out to a similarity in nature and style of eruptions in Hawaii and at least in the western part of the DVP. This has an important bearing on determining the short, medium and long-term effusion rates in the Deccan; however, any concrete inference will have to await systematic volcanological studies of the lava features in the DVP.     

Development of lava tubes in the light of observations at Mauna Ulu,Kilauea Volcano,Hawaii

During the 1969–1974 Mauna Ulu eruption on Kilauea's upper east rift zone, lava tubes were observed to develop by four principal processes: (1) flat, rooted crusts grew across streams within confined channels; (2) overflows and spatter accreted to levees to build arched roofs across streams; (3) plates of solidified crust floating downstream coalesced to form a roof; and (4) pahoehoe lobes progressively extended, fed by networks of distributaries beneath a solidified crust. Still another tube-forming process operated when pahoehoe entered the ocean; large waves would abruptly chill a crust across the entire surface of a molten stream crossing through the surf zone. These littoral lava tubes formed abruptly, in contrast to subaerial tubes, which formed gradually. All tube-forming processes were favored by low to moderate volume-rates of flow for sustained periods of time. Tubes thereby became ubiquitous within the pahoehoe flows and distributed a very large proportionof the lava that was produced during this prolonged eruption. Tubes transport lava efficiently. Once formed, the roofs of tubes insulate the active streams within, allowing the lava to retain its fluidity for a longer time than if exposed directly to ambient air temperature. Thus the flows can travel greater distances and spread over wider areas. Even though supply rates during most of 1970–1974 were moderate, ranging from 1 to 5 m³/s, large tube systems conducted lava as far as the coast, 12–13 km distant, where they fed extensive pahoehoe fields on the coastal flats. Some flows entered the sea to build lava deltas and add new land to the island. The largest and most efficient tubes developed during periods of sustained extrusion, when new lava was being supplied at nearly constant rates. Tubes can play a major role in building volcanic edifices with gentle slopes because they can deliver a substantial fraction of lava erupted at low to moderate rates to sites far down the flank of a volcano. We conclude, therefore, that the tendency of active pahoehoe flows to form lava tubes is a significant factor in producing the common shield morphology of basaltic volcanoes.     

The internal structure of lava flows—insights from AMS measurements II: Hawaiian pahoehoe, toothpaste lava and 'a'

We studied the anisotropy of magnetic susceptibility (AMS) of 22 basaltic flow units, including S-type pahoehoe, P-type pahoehoe, toothpaste lava and 'a' emplaced over different slopes in two Hawaiian islands. Systematic differences occur in several aspects of AMS (mean susceptibility, degree of anisotropy, magnetic fabric and orientation of the principal susceptibilities) among the morphological types that can be related to different modes of lava emplacement. AMS also detects systematic changes in the rate of shear with position in a unit, allowing us to infer local flow direction and some other aspects of the velocity field of each unit. 'A' flows are subject to stronger deformation than pahoehoe, and also their internal parts behave more like a unit. According to AMS, the central part of pahoehoe commonly reveals a different deformation history than the upper and lower extremes, probably resulting from endogenous growth.     

Lava tubes,terraces and megatumuli on the 1614–24 pahoehoe lava flow field,Mount Etna,sicily

The 1614–1624 lava flow of Mt. Etna was formed during a long-duration flank eruption involving predominantly pahoehoe flows which produced unusual surface features including mega-tumuli (here defined) and terraces. Detailed mapping of the flow units, surface features, and associated tubes reveals a complex sequence of emplacement for the field. The stair-stepped terraces appear to have been formed as a consequence of self-damming of tube-fed flows which developed «perched» ponds of lava. Surges of lava through tubes elevated sections of crusted lava at the distal ends of the flow to generate tumuli, some as high as 130 m, as a consequence of pressure via «hydrostatic head» conditions within the tube. Although pahoehoe lavas and the related features described here are atypical of Mt. Etna, they may reflect styles of eruption and lava emplacement found on volcanoes elsewhere.     

Pahoehoe and aa in Hawaii: volumetric flow rate controls the lava structure

The historical records of Kilauea and Mauna Loa volcanoes reveal that the rough-surfaced variety of basalt lava called aa forms when lava flows at a high volumetric rate (>5–10 m³/s), and the smooth-surfaced variety called pahoehoe forms at a low volumetric rate (<5–10 m³/s). This relationship is well illustrated by the 1983–1990 and 1969–1974 eruptions of Kilauea and the recent eruptions of Mauna Loa. It is also illustrated by the eruptions that produced the remarkable paired flows of Mauna Loa, in which aa formed during an initial short period of high discharge rate (associated with high fountaining) and was followed by the eruption of pahoehoe over a sustained period at a low discharge rate (with little or no fountaining). The finest examples of paired lava flows are those of 1859 and 1880–1881. We attribute aa formation to rapid and concentrated flow in open channels. There, rapid heat loss causes an increase in viscosity to a threshold value (that varies depending on the actual flow velocity) at which, when surface crust is torn by differential flow, the underlying lava is unable to move sufficiently fast to heal the tear. We attribute pahoehoe formation to the flowage of lava at a low volumetric rate, commonly in tubes that minimize heat loss. Flow units of pahoehoe are small (usually <1 m thick), move slowly, develop a chilled skin, and become virtually static before the viscosity has risen, to the threshold value. We infer that the high-discharge-rate eruptions that generate aa flows result from the rapid emptying of major or subsidiary magma chambers. Rapid near-surface vesiculation of gas-rich magma leads to eruptions with high discharge rates, high lava fountains, and fast-moving channelized flows. We also infer that long periods of sustained flow at a low discharge rate, which favor pahoehoe, result from the development of a free and unimpeded pathway from the deep plumbing system of the volcano and the separation of gases from the magma before eruption. Achievement of this condition requires one or more episodes of rapid magma excursion through the rift zone to establish a stable magma pathway.     

A laboratory investigation into the effects of slope on lava flow morphology

In an attempt to model the effect of slope on the dynamics of lava flow emplacement, four distinct morphologies were repeatedly produced in a series of laboratory simulations where polyethylene glycol (PEG) was extruded at a constant rate beneath cold sucrose solution onto a uniform slope which could be varied from 1° through 60°. The lowest extrusion rates and slopes, and highest cooling rates, produced flows that rapidly crusted over and advanced through bulbous toes, or pillows (similar to subaerial “toey” pahoehoe flows and to submarine pillowed flows). As extrusion rate and slope increased, and cooling rate decreased, pillowed flows gave way to rifted flows (linear zones of liquid wax separated by plates of solid crust, similar to what is observed on the surface of convecting lava lakes), then to folded flows with surface crusts buckled transversely to the flow direction, and, at the highest extrusion rates and slopes, and lowest cooling rates, to leveed flows, which solidified only at their margins. A dimensionless parameter, Ψ, primarily controlled by effusion rate, cooling rate and flow viscosity, quantifies these flow types. Increasing the underlying slope up to 30° allows the liquid wax to advance further before solidifying, with an effect similar to that of increasing the effusion rate. For example, conditions that produce rifted flows on a 10° slope result in folded flows on a 30° slope. For underlying slopes of 40°, however, this trend reverses, slightly owing to increased gravitational forces relative to the strength of the solid wax. Because of its significant influence on heat advection and the disruption of a solid crust, slope must be incorporated into any quantitative attempt to correlate eruption parameters and lava flow morphologies. These experiments and subsequent scaling incorporate key physical parameters of both an extrusion and its environment, allowing their results to be used to interpret lava flow morphologies on land, on the sea floor, and on other planets.     

Emplacement conditions of the c. 1,600-year bp Collier Cone lava flow, Oregon: a LiDAR investigation

A long-standing question in lava flow studies has been how to infer emplacement conditions from information preserved in solidified flows. From a hazards perspective, volumetric flux (effusion rate) is the parameter of most interest for open-channel lava flows, as the effusion rate is important for estimating the final flow length, the rate of flow advance, and the eruption duration. The relationship between effusion rate, flow length, and flow advance rate is fairly well constrained for basaltic lava flows, where there are abundant recent examples for calibration. Less is known about flows of intermediate compositions (basaltic andesite to andesite), which are less frequent and where field measurements are limited by the large block sizes and the topographic relief of the flows. Here, we demonstrate ways in which high-resolution digital topography obtained using Light Detection and Ranging (LiDAR) systems can provide access to terrains where field measurements are difficult or impossible to collect. We map blocky lava flow units using LiDAR-generated bare earth digital terrain models (DTMs) of the Collier Cone lava flow in the central Oregon Cascades. We also develop methods using geographic information systems to extract and quantify morphologic features such as channel width, flow width, flow thickness, and slope. Morphometric data are then analyzed to estimate both effusion rates and emplacement times for the lava flow field. Our data indicate that most of the flow outline (which comprises the earliest, and most voluminous, flow unit) can be well explained by an average volumetric flux ～14–18?m³/s; channel data suggest an average flux ～3?m³/s for a later, channel-filling, flow unit. When combined with estimates of flow volume, these data suggest that the Collier Cone lava flow was most likely emplaced over a time scale of several months. This example illustrates ways in which high-resolution DTMs can be used to extract and analyze morphologic measurements and how these measurements can be analyzed to estimate emplacement conditions for inaccessible, heavily vegetated, or extraterrestrial lava flows.     

Development of the 1990 Kalapana Flow Field,Kilauea Volcano,Hawaii

The 1990 Kalapana flow field is a complex patchwork of tube-fed pahoehoe flows erupted from the Kupaianaha vent at a low effusion rate (approximately 3.5 m³/s). These flows accumulated over an 11-month period on the coastal plain of Kilauea Volcano, where the pre-eruption slope angle was less than 2°. the composite field thickened by the addition of new flows to its surface, as well as by inflation of these flows and flows emplaced earlier. Two major flow types were identified during the development of the flow field: large primary flows and smaller breakouts that extruded from inflated primary flows. Primary flows advanced more quickly and covered new land at a much higher rate than breakouts. The cumulative area covered by breakouts exceeded that of primary flows, although breakouts frequently covered areas already buried by recent flows. Lava tubes established within primary flows were longer-lived than those formed within breakouts and were often reoccupied by lava after a brief hiatus in supply; tubes within breakouts were never reoccupied once the supply was interrupted. During intervals of steady supply from the vent, the daily areal coverage by lava in Kalapana was constant, whereas the forward advance of the flows was sporadic. This implies that planimetric area, rather than flow length, provides the best indicator of effusion rate for pahoehoe flow fields that form on lowangle slopes.     

The initial cooling of pahoehoe flow lobes

 In this paper we describe a new thermal model for the initial cooling of pahoehoe lava flows. The accurate modeling of this initial cooling is important for understanding the formation of the distinctive surface textures on pahoehoe lava flows as well as being the first step in modeling such key pahoehoe emplacement processes as lava flow inflation and lava tube formation. This model is constructed from the physical phenomena observed to control the initial cooling of pahoehoe flows and is not an empirical fit to field data. We find that the only significant processes are (a) heat loss by thermal radiation, (b) heat loss by atmospheric convection, (c) heat transport within the flow by conduction with temperature and porosity-dependent thermal properties, and (d) the release of latent heat during crystallization. The numerical model is better able to reproduce field measurements made in Hawai'i between 1989 and 1993 than other published thermal models. By adjusting one parameter at a time, the effect of each of the input parameters on the cooling rate was determined. We show that: (a) the surfaces of porous flows cool more quickly than the surfaces of dense flows, (b) the surface cooling is very sensitive to the efficiency of atmospheric convective cooling, and (c) changes in the glass forming tendency of the lava may have observable petrographic and thermal signatures. These model results provide a quantitative explanation for the recently observed relationship between the surface cooling rate of pahoehoe lobes and the porosity of those lobes (Jones 1992, 1993). The predicted sensitivity of cooling to atmospheric convection suggests a simple field experiment for verification, and the model provides a tool to begin studies of the dynamic crystallization of real lavas. Future versions of the model can also be made applicable to extraterrestrial, submarine, silicic, and pyroclastic flows. Received: 26 November 1994 / Accepted: 1 December 1995     

The 1975 sub-terminal lavas, mount etna: a case history of the formation of a compound lava field

The 1975 sub-terminal activity was characterised by low effusion rates (0.3–0.5 m³ s⁻¹) and the formation of a compound lava field composed of many thousands of flow units. Several boccas were active simultaneously and effusion rates from individual boccas varied from about 10⁻⁴ to 0.25 m³s⁻¹. The morphology of lava flows was determined by effusion rate (E): aa flows with well-developed channels and levees formed when E > 2 × 10⁻³ m³ s⁻¹, small pahoehoe flows formed when 2 × 10⁻³ m³ s⁻¹ >E > 5 > 10⁻⁴ m³ s⁻¹ and pahoehoe toes formed when E < 5 × 10⁻⁴ m³ s⁻¹. There was very little variation with time in the effusion temperature, composition or phenocryst content of the lava.New boccas were commonly formed at the fronts of mature lava flows which had either ceased to flow or were moving slowly. These secondary boccas developed when fluid lava in the interior of mature aa flows either found a weakness in the flow front or was exposed by avalanching of the moving flow front. The resulting release of fluid lava was accompanied by either partial drainage of the mature flow or by the formation of a lava tube in the parent flow. The temperature of the lava forming the new bocca decreased with increasing distance from the source bocca (0.035°C m⁻¹). It is demonstrated from the rate of temperature decrease and from theoretical considerations that many of the Etna lavas still contained a substantial proportion of uncooled material in their interior as they came to rest. The formation of secondary boccas is postulated to be one reason why direct measurements of effusion rates tend, in general, to overestimate the total effusion rates of sub-terminal Etna lava fields.     

The pit-craters and pit-crater-filling lavas of Masaya volcano

Lava flowing into a pit crater will become entrapped to form an inactive lava lake. At Masaya volcano (Nicaragua) pit filling lavas are exposed in the walls of Nindiri, Santiago and San Pedro pits. Mapping of these lavas shows that fill can involve emplacement of both ’a’a and pahoehoe, with single fill units ranging in thickness from 2 to 22 m. Thick units with columnar joints were emplaced as simple inactive lava lakes during high effusion rate episodes. Sequences of thinner units, which can form pit floor shields or compound lakes, were emplaced at lower effusion rates. Lava withdrawal caused unsupported sections of three 20-m-thick units to subside, resulting in unit flexure and faulting, and viscous peeling features reveal that subsidence occurred while at least one unit was still partially molten. Where withdrawal has not occurred, fill sequences are flat lying and symmetrically distributed around the feeder structures (cinder cones and dykes). The filled Nindiri pit holds 5 × 10⁷ m³ of lava in a 215-m-thick sequence. Partial fill of Santiago pit with 1 × 10⁷ m³ of lava has filled the pit with a 110-m-thick lava sequence, of which ∼50% has been consumed by formation of a secondary pit. Altogether, 6.4 × 10⁷ m³ of lava was erupted into Nindiri and Santiago during 1525–1965, with 94% of this volume remaining pit-contained; the remainder forms a north flank lava flow field. Pit development and filling is a dynamic and ephemeral process, having short-lived effects on volcano morphology, where pits develop and fill over hours-to-centuries. However, pits play an important role in shaping an edifice, representing lava sinks and controlling whether lavas are trapped or able to spread onto the flanks.     

Morphology of rubbly pahoehoe (simple) flows from the Deccan Volcanic Province: Implications for style of emplacement

Lava flows with preserved bases and brecciated upper crusts constitute a morphological type that differs in character from typical pahoehoe and a'a: such flows have been reported from many provinces around the world. Previous studies had referred to these flows informally as ‘pahoehoe flows with rubbly tops’, ‘broken-top pahoehoe’ and ‘rubbly pahoehoe’. Recent studies have formally applied the latter term to describe parts of the well-studied Laki flow in Iceland as well as flows from the Columbia River Basalt province. Rubbly pahoehoe flows are abundant in the upper stratigraphic formations of the Deccan Volcanic Province (DVP), and are more commonly known as simple flows. This study presents detailed observations of such flows from various parts of the DVP and discusses their implications for understanding flow emplacement. These flows, which appear to be single units at the outcrop-scale, are generally much thicker and significantly more extensive than individual pahoehoe lobes that dominate the lower formations of the Deccan stratigraphy. They are characterised by preserved, gently undulating tachylitic bases but variably disrupted crustal zones that grade into flow-top breccias. The breccias are constituted of highly vesicular and oxidised fragments of varying sizes that appear to have been derived from previously formed pahoehoe crusts. Previous work has indicated that the morphology of these flows might be related to initial inflation, accompanied by rapid volatile exsolution and an increase in effusion rate and/or viscosity with time. This agrees reasonably well with the qualitative and quantitative models of emplacement developed for the Laki flow. The abundance of such flows in the upper formations of the Deccan stratigraphy clearly hints at a significant shift in the nature of the Deccan eruptions; this could be indicative of higher eruption rates during this period. This, in turn, raises the possibility of hazardous impact on the climate during the eruption of these flows, which is also discussed in the paper.     

Rock magnetic evidence of inflation of a flood basalt lava flow

The anisotropy of magnetic susceptibility (AMS) of lava flows is an innovative method which has been proved to be directly related to the shear history of lava. One of the advantages of this method is that it can be used in the absence of other morphological features commonly employed to study the mechanism of emplacement of lava flows. This feature of the AMS method makes it very attractive to gain insight into the mechanism of emplacement of massive, relatively featureless, long lava flows such as those forming flood basalt provinces. In this work, we report the results of the measurement of AMS as a function of vertical position within the Birkett lava flow, one of the Columbia River Basalt Group flows. The observed variation of AMS allows us to identify at least 16 discrete events of lava injection and to estimate the thickness of individual injection events. The AMS-estimated thickness of each injection event (in the range of 0.5-4.0 m) coincides with the range inferred for injected lava pulses in modern Hawaiian lava flows. Thus, the evidence provided by the AMS method supports the notion that at least some flood basalt lava flows were emplaced by the same mechanism as many present-day inflated pahoehoe flows. Regarding the orientation of the principal susceptibilities, in the central part of the flow they define a preferred orientation along an E-W trend, whereas in the outer parts of the flow they have a NNE-SSW trend. This difference in the orientation of the principal susceptibilities is interpreted as the result of a change of flow direction of the lava as emplacement progressed. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00445-002-0203-8.     

Morphology and emplacement of flows from the Deccan Volcanic Province,India

The present study is probably the first of its kind in the Deccan Volcanic Province (DVP) that deals in detail with the morphology and emplacement of the Deccan Trap flows, and employs modern terminology and concepts of flow emplacement. We describe in detail the two major types of flows that occur in this province. Compound pahoehoe flows, similar to those in Hawaii and the Columbia River Basalts (CRB) constitute the older stratigraphic Formations. These are thick flows, displaying the entire range of pahoehoe morphology including inflated sheets, hummocky flows, and tumuli. In general, they show the same three-part structure associated with pahoehoe flows from other provinces. However, in contrast to the CRB, pahoehoe lobes in the DVP are smaller, and hummocky flows are quite common. 'Simple' flows occur in the younger Formations and form extensive sheets capped by highly vesicular, weathered crusts, or flow-top breccias. These flows have few analogues in other provinces. Although considered to be a'a flows by previous workers, the present study clearly reveals that the simple flows differ considerably from typical a'a flows, especially those of the proximal variety. This is very significant in the context of models of flood basalt emplacement. At the same time, they do not display direct evidence of endogenous growth. Understanding the emplacement of these flows will go a long way in determining whether all extensive flows are indeed inflated flows, as has recently been postulated.Most of the studies relating to the emplacement of Continental Flood Basalt (CFB) lavas have relied on observations of flows from the CRB. Much of the current controversy surrounding the emplacement of CFB flows centers around the comparison of Hawaiian lava flows to those from the CRB. We demonstrate that the DVP displays a variety of lava features that are similar to those from the CRB as well as those from Hawaii. This suggests that there may have been more than one mechanism or style for the emplacement of CFB flows. These need to be taken into account before arriving at any general model for flood basalt emplacement.Editorial responsibility: T. Druitt     

Pahoehoe flows from the central Paraná Continental Flood Basalts

Inflated and compound pahoehoe flows have been identified within the central Paraná Continental Flood Basalts based upon their morphology, surface features, and internal zonation. Pahoehoe flow features have been studied at five localities in the western portion of Paraná State, Brazil: Ponte Queimada, Toledo, Rio Quitéria, Matelandia and Cascavel. We have interpreted the newly recognized flow features using concepts of Hawaiian pahoehoe formation and emplacement that have been previously applied to the Columbia River Basalt and Deccan Plateau. Surface features and/or internal structure typical from pahoehoe lavas are observed in all studied areas and features like inflation clefts, squeeze-ups, breakouts, and P-type lobes with two levels of pipe vesicles are indicative of inflation in these flows. The thinner, compound pahoehoe flows are predominantly composed of P-type lobes and probably emerged at the end of large inflated flows on shallow slopes. The presence of vesicular cores in the majority of compound lobes and the common occurrence of segregation structures suggests high water content in the pahoehoe lavas from the central PCFB. More volcanological studies are necessary to determinate the rheology of lavas and refine emplacement models.Editorial responsibility: C. Kilburn     

Emplacement of the 1907 Mauna Loa basalt flow as derived from precision topography and satellite imaging

An eruption in January of 1907, from the southwest rift zone of Mauna Loa, produced a substantial lava flow field. Satellite images and Differential Global Positioning System (DGPS) survey data, along with observations and photographs from the field, are combined to provide a new perspective on the 1907 eruption. Boundaries of the flow field from the satellite data, combined with field measurements of flow thickness, indicate an area of 25.1 km² and a volume of 86.6 million m³. The eastern lobe of the flow field covers an area of 13.1 km², with a volume of 55.0 million m³, and was emplaced with an average effusion rate of 119 m³/s (at least, for the upper portion of the lobe). Ten DGPS topographic profiles across the eastern lobe aid in distinguishing the characteristics of, and transitions between, the zones identified during the emplacement of the 1984 Mauna Loa flow. Several subdivisions have been built directly on top of or adjacent to the 1907 lava flow. The strong likelihood of future eruptions from the Mauna Loa southwest rift zone makes these housing developments of particular importance for assessments of potential volcanic hazards.