利用VSP资料直达波的包络峰值处瞬时频率提取介质品质因子

本文采用一个具有4个待定参数的函数去逼近震源子波,利用黏弹介质中单程波传播理论推导出了地震子波包络峰值处瞬时频率(EPIF)和品质因子之间的解析关系;同时,为提高瞬时频率的估计精度和抗噪性能,在小波域中发展了一种计算瞬时频率的方法,并在此基础上提出了估算VSP资料Q值的方法,简称小波域包络峰值处瞬时频率法(WEPIF)．合成的VSP数据衰减估计结果表明,与对数谱比法和中心频率偏移法相比较,WEPIF法受到界面反射波影响相对较小、计算结果稳定、精度相对较高．将WEPIF法用于某气田的单炮零偏6级VSP资料Q值估计,结果表明,吸收强弱与储层含气性高低有良好的对应关系．     

瞬时频谱分析及其在地震趋势估计中的应用

首先简述了瞬时频谱分析理论,并用3个信号的瞬时频谱计算结果与其 Fourier 谱的比较,说明了瞬时谱的优越性.最后,将瞬时频谱分析用于华北地区几个地震带的地震趋势估计的研究中.结果表明,用地震序列的瞬时谱分析,不仅对未来大震的发生时间,而且对大地震的震级,都能给出较好的估计.     

基于Hilbert-Huang变换的地震瞬时属性提取方法及应用(英文)

希尔伯特—黄变换(Hilbert-Huang transform,HHT)是一种新的适合非平稳和非线性信号的分析方法,由于地震信号一般呈现出非平稳与非线性特性,因此HHT非常适合地震信号的分析。本文首先介绍了HHT中关于经验模态分解(Empirical Mode Decomposition,EMD)的实现过程,在此基础上分析了几种基于EMD获得本征模态函数(Intrinsic Mode Functions,IMF)来计算瞬时频率的算法,其中利用了两个采样间隔瞬时频率的平均来计算瞬时频率,较好地反映了地震信号频率成分随时间变化的特征。将该方法应用于四川东北部某地区海相碳酸盐岩地层三维地震叠后偏移数据处理,提取"三瞬"地震属性,与传统的希尔伯特变换提取的"三瞬"地震属性进行对比,结果表明基于HHT的"三瞬"地震属性结果具有更高的分辨率,IMF2的瞬时相位能够较好地刻画台地边缘生物礁相,IMF2的瞬时频率亦具有较好的分带性。将IMF2的"三瞬"地震属性与钻井等资料结合分析,能够更好地识别沉积相的分布。     

地震信号瞬时频率的估算

本文比较了四类计算瞬时频率的方法.基于相位差分的方法对噪声敏感;基于零交叉点的方法是针对周期信号提出的,对非周期信号效果不理想,通过插值改善估算结果;基于FIR微分器的方法有三种,基于两点的FIR方法与标准公式较为接近,但会引入半个采样间隔的时移;基于三点的FIR方法可以消除时移,但计算结果会出现负频尖峰;Claerbout方法不仅会引入半个采样间隔的时移,而且估算的频率值可能超过Nyqusit频率.本文在Claerbout公式的基础上导出了一种估算瞬时频率的公式,该公式消除了时移,且负频尖峰也得到抑制;基于时频表示一阶矩的方法的计算结果较为平滑,同时具有一定的抗噪能力.最后用本文导出的公式和时频表示一阶矩两种方法计算了南海东北部一条地震剖面的瞬时频率,并将其结果与Seismic Unix中相关函数的计算结果做了比较,表明本文导出公式的计算结果较为理想.     

基于地震剖面瞬时峰值能量频率的衰减分析与气藏预测方法

由于流体本身的粘滞性和摩擦性,使得地震波在含油气地层中传播时衰减形成低频阴影.通过对叠后地震资料做时频分解,分析地层衰减特征,是当前除了AVO技术之外,比较流行的直接识别流体和气藏的技术.本文基于波动方程正演,模拟了地震波对含油气地层的响应.然后采用连续小波变换分析不同尺度剖面的瞬时能量特征,提取分频剖面上每一个点的峰值能量对应的频率,得到瞬时峰值能量频率剖面.通过分析瞬时峰值能量频率剖面,分析了地震波在地下介质中传播时的衰减特征.最后应用此方法对实际地震剖面进行了分析,验证了其有效性.     

瞬时频域衰减属性及其在碳酸盐岩裂缝检测中的应用

基于AVO梯度、走时及速度的纵波方位角裂缝检测已有较多研究和应用.由于裂缝及所含流体的综合作用,碳酸岩裂缝性储层的地震响应具有高频衰减、频带低移及方位各向异性的特点,因此应用衰减属性进行裂缝预测具有重要价值.基于小波变换计算的瞬时频域振幅谱及以此为基础提取的衰减属性,由于在时域和频域都有较好的分辨率能力,能够准确地刻画出碳酸岩裂缝性储层的非均质性.结合三维地震纵波数据的分方位角处理和分析技术,可以由方位衰减属性估算裂缝相对密度.对Z区下古生界潜山碳酸岩储层进行的裂缝预测表明,由衰减梯度和85%能量比频率两种属性导出的裂缝发育密度具有很好的相关性,且与实际情况符合.     

基于振幅和瞬时频率的震相自动识别方法

为了充分反映地震信号振幅增大和频率改变的特征,发展了一种以振幅和瞬时频率比乘积为特征参量的震相自动识别方法。谐波信号和有限实际地震记录的应用表明,本方法具有较高的识别精度。     

Contourlet变换在局部角度属性提取中的应用

为了直观展示地质的构造走向、暗示细小裂缝信息,便于地震资料解释,应用Contourlet变换和无抽样Contourlet变换提取地震剖面的局部角度属性,提出了基于Contourlet变换的局部角度属性提取方法.首先用Contourlet变换或无抽样Contourlet变换将地震剖面分解成为不同尺度下的方向子带,然后将不...     

三种变换在强震记录分析方面的研究

在简要地介绍比较了傅立叶变换、小波变换、希尔伯特-黄变换理论的基础上,针对集集地震大量强震记录进行各种变换分析比较,以探求希尔伯特-黄变换在强震记录分析中应用的前景.通过对集集地震60条不同震中距和场地的强震纪录,分别作傅立叶频谱、希尔伯特-黄边际谱和能量密度谱分析,列表归纳对比显示希尔伯特-黄变换在强震记录处理中基本表现出和其他变换相同的趋势,并有其新特点,能体现出强地震动的瞬时特性,是对现有强震数据处理方法重要的补充.     

基于瞬时相位和Curvelet变换的地层结构提取方法

储层的几何形态和空间展布预测是储层预测的主要内容.本文根据Curvelet变换的奇性分析特征及地震资料瞬时相位在追踪地质层位的优势,提出了基于Curvelet变换的地层结构提取方法.将提取的地层结构剖面和瞬时频率或其它与地层岩性相关属性联合显示,能更清晰、直观地解释有利储层的几何形态和空间展布特征.通过合成资料和实际数据的算例,验证了本文方法的有效性.     

叠前三维地震近地表吸收补偿技术在大庆油田的应用研究(英文)

与深层致密岩石相比,相对疏松的近地表地层严重吸收了地震波的高频成分,降低了地震数据的分辨率和高频成分的信噪比。本文利用井中雷管激发、地面检波器接收的微测井直达波资料,通过分析近地表地层不同传播距离的地震直达波频谱信息差异,采用维纳滤波方法,进行近地表吸收补偿反滤波器的求取,将不同微测井测量点对应的近地表吸收补偿反滤波器应用于相应的叠前共检波点道集地震数据,完成了叠前地震数据的空变吸收衰减补偿,克服了叠后地震数据无法实现空变补偿的难题。叠前三维地震近地表吸收补偿后的数据,较补偿前地震数据的优势信噪比频带宽度明显拓宽,低频成分基本保持,反射信息量有较大程度增加,而且与合成记录吻合更好,能更好的满足地质解释的需要,提高解释精度。     

Windowless Q-factor tomography by the instantaneous frequency

The estimation of the Q factor of rocks by seismic surveys is a powerful tool for reservoir characterization, as it helps detecting possible fractures and saturating fluids. Seismic tomography allows building 3D macro-models for the Q factor, using methods as the spectral ratio and the frequency shift. Both these algorithms require windowing the seismic signal accurately in the time domain; however, this process can hardly follow the continuous variations of the wavelet length as a function of offset and propagation effects, and it is biased by the interpreter choice. In this paper, we highlight some drawback of signal windowing in the frequency-shift method, and introduce a tomographic approach to estimate the Q factor using the complex attributes of the seismic trace. We show that such approach is particularly needed when the dispersion is broadening the waveforms of signals with a long wave-path. Our method still requires an interpretative event picking, but no other parameters as the time window length and its possible smoothing options. We validate the new method with synthetic and real data examples, involving the joint tomographic inversion of direct and reflected signals. We show that a calibration of the frequency-shift method is needed to improve the estimation of the absolute Q factor, otherwise only relative contrasts are obtained.     

高精度频率衰减分析技术及其应用(英文)

本文从含流体孔隙介质中的地震波场的衰减理论出发,对常规的频率衰减分析技术中的"低频阴影"和"频率衰减梯度"分析方法进行了改进,提出了一种高精度的频率衰减分析技术。首先,通过引入三参数小波变换和时频聚焦准则,发展了一种基于自适应三参数小波变换的高精度时频分析方法,其不仅具有很高的时—频分辨率(有利于"低频阴影"分析),而且其频谱只有一个峰,旁瓣比较小(有利于"频率衰减梯度"分析)。其次,采用基于最小二乘法的Nelder-Mead非线性算法对频谱的衰减部分进行拟合计算,可以准确地计算衰减系数,提高了"频率衰减梯度"的计算精度。实际资料的计算结果表明,本文提出的综合"低频阴影"和"频率衰减梯度"方法的频率衰减分析技术能够有效地圈定碳酸盐岩鲕滩储层的发育区域,且两种方法具有很好的一致性,有效地提高了储层预测的可靠性,从而降低了勘探风险。     

Statistical estimation of corner frequency and its application to seismic event-identification

A statistical method is proposed for estimation of the corner frequency. It is based on inference for a stochastic model whose short-term behavior resembles the established source time functions. Properties of the estimates are investigated and some numerical examples are presented. A discussion concerning earthquake–explosion discrimination and the way corner frequency can be related to the rate of zero-crossings is also included. The paper is concluded with some numerical examples.     

Seismic attenuation tomography in frequency domain and its application to engineering

Seismic tomography is a new geophysical technique being developed to meet the needs of mining and engineering projects. Attenuation tomography, as one kind of seismic tomography technique, is a powerful prospecting tool for determining structure defaults such as fault, broken zone, and hidden voids, but it has been little discussed up to now. Its principle and applications are presented in detail. Attenuation tomography technology includes the following main points. First, on the basis of spectrum analysis to each seismic record, geometric correction is conducted, then common source parameters are introduced into common shot records in order to keep absorption effect of the geological media separate from source spectrum influence. Finally, an equation set is obtained which consists of absorption coefficients, common source parameters and energy field data observed. This technique can be employed together with velocity tomography to provide more evidence for engineering and geological diagnosis. Its applications to exploration of mineral and engineering have led to satisfactory results.     

浮游植物叶绿素a的微波法研究及其与反复冻融法的比较

为缩短样品处理时间和提高测定准确度,本文设计和优化了微波处理辅助提取浮游植物叶绿素a的方法,并比较了反复冻融法和微波法对浮游植物叶绿素a的提取效率.结果表明:(1)微波法提取叶绿素a的最优处理条件为:高火(额定输出功率800 W)处理60 s左右.过滤水量为:贫营养型水体为1000 ml以上,中、富营养水体为100~500 ml.(2)反复冻融法在测定贫营养型水体时更稳定,而微波法对中、富营养水样提取率显著高于冻融法,可提高7%~12%,对具胶被及硅质外壳的藻类提取效率极显著高于冻融法,测定结果的相对偏差更小,且提取时间较冻融法缩短一半以上,适用于富营养化水体的应急监测.     

The algorithm of decomposing superim-posed 2-D Poisson processes and its applica-tion to the extracting earthquake clustering pattern

IntroductionClusteringearthquakesareusuallyconsideredasomensofstrongearthquakesorasignaloftectonicmovement.Thus,theyarenotonlyoneoftheprimaryevidencestopredictearthquakesbutalsoasignificantindicatortorecognizetectonicmovement(MEI,etal,1993;EarthquakePre-dictionandPreventionDepartmentofChinaSeismologicalBureau,1998).Ongeneralconditions,webelievethatclusteringearthquakesexistrelativelytobackgroundearthquakes,howtoeffectivelyseparateonefromtheotherbecomesthekeypointofextractingtheclusteringea…     

Energy-consistent integration method and its application to hybrid testing

The time-integration algorithm is an indispensable element to determine response of the boundary of the numerical as well as physical parts in a hybrid test. Instability of the time-integration algorithm may directly lead to failure of the test, so stability of an integration algorithm is particularly important for hybrid testing. The explicit algorithms are very popular in hybrid testing, because iteration is not needed. Many unconditionally stable explicit-algorithms have been proposed for hybrid testing. However, the stability analysis approaches used in all these methods are valid only for linear systems. In this paper, a uniform formulation for energy-consistent time integrations, which are unconditionally stable, is proposed for nonlinear systems. The solvability and accuracy are analyzed for typical energy-consistent algorithms. Some numerical examples and the results of a hybrid test are provided to validate the effectiveness of energy-consistent algorithms.     

Gauss linear frequency modulation wavelet transforms and its application to seismic phases identification

Introduction The accurate gradual change style seismic phases identification is an older new question for discussion. Wavelet transform has good localization properties in time-frequency domain, and is a effective tool to analyze seismic signal which has been applied to detection of many kinds of signal, picture processing and other fields. When a kind of new signal stack up another kind of signal, more high frequency signal components will happen at onset time of new signal. Based on the wave…     

小波变换方法及其应用

简要介绍小波变换的方法,并给出了小波变换在地震前兆和爆破识别等方面的一些应用,探讨二进小波分析在地震前兆研究方面的应用前景。