A natural cement analogue study to understand the long-term behaviour of cements in nuclear waste repositories: Maqarin (Jordan)

The geological storage of nuclear waste includes multibarrier engineered systems where a large amount of cement-based material is used. Predicting the long term behaviour of cement is approached by reactive transport modelling, where some of the boundary conditions can be defined through studying natural cement analogues (e.g. at the Maqarin natural analogue site). At Maqarin, pyrometamorphism of clay biomicrites and siliceous chalks, caused by the in-situ combustion of organic matter, produced various clinker minerals. The interaction of infiltrating groundwater with these clinker phases resulted in a portlandite-buffered hyperalkaline leachate plume, which migrated into the adjacent biomicrite host rock, resulting in the precipitation of hydrated cement minerals.In this study, rock samples with different degrees of interaction with the hyperalkaline plume were investigated by various methods (mostly SEM-EDS). The observations have identified a paragenetic sequence of hydrous cement minerals, and reveal how the fractures and porosity in the biomicrite have become sequentially filled. In the alkaline disturbed zone, C-A-S-H (an unstoichiometric gel of Ca, Al, Si and OH) is observed to fill the pores of the biomicrite wallrock, as a consequence of reaction with a high pH Ca-rich fluid circulating in fractures. Porosity profiles indicate that in some cases the pores of the rock adjacent to the fractures became tightly sealed, whereas in the veins some porosity is preserved. Later pulses of sulphate-rich groundwater precipitated ettringite and occasionally thaumasite in the veins, whereas downstream in the lower pH distal regions of the hyperalkaline plume, zeolite was precipitated.Comparing our observations with the reactive transport modelling results reveals two major discrepancies: firstly, the models predict that ettringite is precipitated before C-A-S-H, whereas the C-A-S-H is observed as the earlier phase in Maqarin; and, secondly, the models predict that ettringite acts as the principal pore-filling phase in contrast to the C-A-S-H observed in the natural system. These discrepancies are related to the fact that our data were not available at the time the modelling studies were performed. However, all models succeeded in reproducing the porosity reduction observed at the fracture–rock interface in the natural analogue system.     

Geochemical heterogeneity and isotope geochemistry of natural attenuation processes in a gasoline-contaminated aquifer at the Hnevice site,Czech Republic

The geochemical processes, water–rock interactions and stable isotopes distribution (δ¹³C of DIC and δ¹⁸O and δ³⁴S of \({\text{SO}}^{{{\text{2 - }}}}_{{\text{4}}} \)) were investigated in the gasoline-contaminated aquifer at the Hnevice site, 50  km northwest of Prague, Czech Republic. Diesel, gasoline and oil leaks originate from a large fuel storage area causing heavy contamination of the saturated and unsaturated zones in an area of about 0.7  km². Groundwater investigations were conducted using five multilevel sampler wells with emphasis on redox parameters and degradation by-products and a solid-phase study focused on iron speciation and determination of principal and secondary minerals. Based on the study of groundwater and solid-phase geochemistry, four different geochemical zones were described. Zone I is thought to be background consisting of an aerobic aquifer and the absence of reduced species in significant concentrations. Zone II is situated in the plume core with methanogenic, sulphate and iron-reducing conditions accompanied by ankerite and kutnahorite precipitates and significant depletion of the oxidation capacity of the aquifer. Zone III is a mixing (corona) zone, situated at the fringe of the plume with high biodegradation rates and Fe(III)-precipitants. In zone IV, reoxidation of Fe(II) minerals (with e.g. the occurrence of psilomelane and cornelite) is typical.     

Acid-gas injection at West Stoddart, British Columbia: An analogue for the detailed hydrogeological characterization of a CO2 sequestration site

Geological sequestration of CO₂ is an option for significantly reducing emissions into the atmosphere. Various hydrocarbon companies in western Canada are currently injecting acid-gas (CO₂ and H₂S) into deep subsurface formations. At West Stoddart, in northeast British Columbia, acid-gas has been injected since 1998 at 1600 m depth into sandstones of the Triassic Halfway Formation, which forms a regional aquifer. A comprehensive subsurface characterization was conducted of the regional and local-scale geology, reservoir characteristics, mineralogy, in situ fluid properties, and hydrogeology. Preliminary results from geochemical and numerical multi-phase flow modelling suggest that the majority of the injected acid-gas will dissolve in the formation water and remain within a radius of a few kilometres of the injection well. The experience with the acid-gas injection at West Stoddart and other operations in the Alberta Basin has shown that the process of large-scale CO₂-injection into deep aquifers is technically feasible.