Early diagenesis of trace metals (Cd, Cu, Co, Ni, U, Mo, and V) in the freshwater reaches of a macrotidal estuary

Vertical profiles from the water column, including the maximum turbidity zone (MTZ) to the consolidated sediment were sampled in September 2000 in the freshwater reaches of the Gironde Estuary during a complete neap tide-spring tide cycle. The vertical distributions of dissolved major redox parameters and metals (Mn, Fe, Cd, Cu, V, Co, Ni, Mo, and U) were determined. Reactive particulate metal fractions were also determined from selective leaching. The studied system is characterized by density layers functioning at different time-scales, consisting of two mobile layers, i.e., the liquid (LM) and the soft mud (SM), overlying consolidated sediments (CS). This results in a three-zone diagenetic regime where (1) O₂ dynamics are fast enough to show depletion in the rapidly mixed LM sequence (tidal time-scale), (2) denitrification occurs on the weekly time-scale mixing SM sequence, and (3) the Mn, Fe, and sulfate cycling occurs in the CS layer (annual time-scale). The studied trace metals show differential behavior during early diagenesis: (1) Cd, Cu, and V are released into pore water preferentially from organic matter in the SM, (2) Co, Ni, and U are released in the CS from Mn and Fe oxides during reductive dissolution, and (3) Mo from both processes. Transient conditions (i.e., oscillations of redox fronts and reoxidation processes), due to the dynamics of the mobile layers, strongly influence the trace metal distributions as inducing resolubilization (Cd, Cu, and Mo). In the CS, authigenic metal phases accumulate, either by direct precipitation with sulfides (Cu, Cd) or co-precipitation with Fe-sulfides (Mo). Microbially mediated reduction of Fe oxides is proposed to control U removal from pore water by reduction of U(VI) to U(IV) at depth. However, a significant fraction of the trace metals is trapped in the sediment in exchangeable forms, and therefore is susceptible to be mobilized due to resuspension of estuarine sediment during strong river flood periods and/or dredging activities.     

Diagenesis of oxyanions (V, U, Re, and Mo) in pore waters and sediments from a continental margin

This research tests the hypothesis that trace metals respond to the extent of reducing conditions in a predictable way. We describe pore water and sediment measurements of iron (Fe), manganese (Mn), vanadium (V), uranium (U), rhenium (Re), and molybdenum (Mo) along a transect off Washington State (USA). Sediments become less reducing away from the continent, and the stations have a range of oxygen penetration depths (depth to unmeasurable O₂ concentration) varying from a few millimeters to five centimeters. When oxygen penetrates ∼1 cm or less, Fe is reduced in the pore waters but reoxidized near the sediment-water interface, preventing a flux of Fe²⁺ to overlying waters, whereas Mn oxides are reduced and Mn²⁺ diffuses to overlying waters. Both Re and U authigenically accumulate in sediments. Only at the most reducing location, where the oxygen penetrates 0.3 cm below the sediment-water interface, does the surface 30 cm of sediments become reducing enough to authigenically accumulate Mo.Stations in close proximity to the Juan de Fuca Ridge crest are enriched in Mn and Fe from hydrothermal plume processes. Both V and Mo clearly associate with Mn cycling, whereas U may be associating with either Mn oxides and/or Fe oxyhydroxides. Rhenium is uncomplicated by adsorption to Mn oxides and/or Fe oxyhydroxides, and Re accumulation in sediments appears to be due solely to the extent of reducing conditions. Therefore, authigenic sediment Re enrichment appears to be the best indicator for intermediate reducing conditions, where oxygen penetrates less than ∼1 cm below the sediment-water interface, when coupled with negligible authigenic Mo enrichment.     

Cycling of trace metals (Mn, Fe, Mo, U, V, Cr) in deep pore waters of intertidal flat sediments

Trace metals (Mn, Fe, Mo, U, Cr, V) were studied in pore waters of an intertidal flat located in the German Wadden Sea. The study system is an example of a permeable tidal flat system where pore water exchange is affected by tidal driven pressure gradients besides diffusion. Permanently installed in situ samplers were used to extract pore waters down to 5 m depth throughout one year. The samplers were either located close to the tidal flat margin or in central parts of the tidal flat. Despite dynamic sedimentological and hydrological conditions, the general trends with depth in deep tidal flat pore waters are remarkably similar to those observed in deep sea environments. Rates of trace metal cycling must be comparably large in order to maintain the observed pore water profiles. Trace metals further show similar general trends with depth close to the margin and in central parts of the tidal flat. Seasonal sampling revealed that V and Cr vary concurrent with seasonal changes in dissolved organic carbon (DOC) concentration. This effect is most notable close to the tidal flat margin where sulphate, DOC, and nutrients vary with season down to some metres depth. Seasonal variations of Mn, Fe, Mo, and U are by contrast limited to the upper decimetres of the sediment. Their seasonal patterns depend on organic matter supply, redox stratification, and particulate matter deposited on sediment surfaces. Pore water sampling within one tidal cycle provides evidence for pore water advection in margin sediments. During low tide pore water flow towards the creekbank is generated by a hydraulic gradient suggesting that deep pore waters may be seeping out of creekbank sediments. Owing to the enrichment of specific elements like Mn in pore water compared to sea water, seeping pore waters may have an impact on the chemistry of the open water column. Mass balance calculations reveal that the impact of deep pore waters on the Mn budget in the open water column is below 4%. Mn deep pore water discharge of the whole Wadden Sea is estimated to be about 9% of the total dissolved riverine Mn input into the Southern North Sea.     

Trace metal speciation in sea and pore water of the Gotland Deep,Baltic Sea, 1994

Studies on the speciation (particulate, colloidal, anionic and cationic forms) of trace metals (Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, Zn) in the water column and in pore waters of the Gotland Deep following the 1993/94 salt-water inflows showed dramatic changes in the total “dissolved” metal concentrations and in the ratios between different metal species in the freshly re-oxygenated waters below 125 m. Changes in concentrations were greatest for those metals for which the solubility differs with the redox state (Fe, Mn, Co) but were also noted for those metals which form insoluble sulphides (Cd, Pb, Cu, Zn) and/or stable complexes with natural ligands (Cu). Pore water data from segmented surface muds (0–200 mm) indicated that significant redox and related metal speciation changes took place in the surface sediments only a few weeks after the inflow of the oxygenated sea water into the Gotland Deep.     

Colloidal and truly dissolved metal(oid) fractionation in sediment pore waters using tangential flow filtration

The partitioning of trace metal(oid)s between colloidal and “truly” dissolved fractions in sediment pore waters is often overlooked due to the analytical challenge; indeed, only small volumes are available and filtration membranes are rapidly clogged. Moreover, metal(oid)s are subject to co-precipitate with Fe. In this study, tangential flow filtration (TFF) was assessed for the fractionation of Fe, Mn, Cu, As, Co, Ni, Zn and Cd in sediment pore waters with a 5 kDa cut-off size membrane. Five natural sediments were collected and used for different tests. Results on blank samples showed that this technique was appropriate for Fe, Mn, Co, Zn, As and Cd. Although the applied concentration factors (CF) were low (<7.4) due to the small available volume of pore waters (50 mL), it was shown that colloidal concentrations obtained from the TFF procedure were similar whatever the applied concentration factor. The mass balance approach showed satisfying results (100 ± 25%) for Mn, Co, Zn and As. Mass balances were higher than 130% and highly variable for Cd, Ni and Cu. For Fe, mass balance was reproducible but low (71 ± 10%), probably due to sorption of positively charged Fe oxides on the membrane. Applying this method to five contrasting metal(oid)-contaminated sediments, it was shown that Mn, As, Co and Fe were mainly present in the “truly” dissolved phase (<5 kDa). This technique is a necessary step to assess sediment toxicity and bioavailability of metal(oid)s and could be of great interest for emergent pollutants such as nanometals.     

Partitioning of copper and zinc in the sediments and porewaters of a high-elevation alkaline lake,east-central Arizona,U.S.A.

In Pacheta Lake, a high-elevation alkaline lake proximal to the smelting region of southern Arizona-New Mexico, concentrations of transition metal ions in pore waters and co-existing sediments were compared. Copper, Fe, Mn and Zn have been partitioned among operationally defined sediment solid phases (exchangeable sites, organic complexes, amorphous oxides, crystalline oxides, sulfides and residual silicates) and their concentrations in interstitial waters were measured. Concentrations are reported as a function of depth in the sediment column. The diagenetic environment is described and cycling mechanisms postulated for the above metals.Selective, sequential extraction of metals from lake sediments showed different binding mechanisms for Cu and Zn, the former most strongly associated with organic complexes, and the latter with iron oxyhydroxides. This difference has strong implications for selective metal remobilization under variable environmental conditions, both naturally and anthropogenically induced. Copper and zinc in porewaters were estimated to diffuse to overlying waters at 12.8 and 21.9 μg/cm²/a, respectively. These fluxes are large enough to account for observed concentrations of Cu and Zn in overlying waters. No sediment metal contamination was directly attributable to smelting activity. However, this study does document a flux from sediments, which have accumulated Cu and Zn, to overlying waters no longer receiving trace metal deposition from now inactive smelters.     

Seasonal Influence of the Needle Rush <Emphasis Type="Italic">Juncus roemarianus</Emphasis> on Saltmarsh Pore Water Geochemistry

Previous studies have shown that saltmarsh macrophytes have a significant influence on sediment biogeochemistry, both through radial release of oxygen from roots and also via primary production and release of labile organic exudates from roots. To assess the seasonal influence of the needle rush, Juncus roemarianus, on saltmarsh sediment geochemistry, pore waters and sediments were collected from the upper 50 cm of two adjacent sites, one unvegetated and the other vegetated by Juncus roemarianus, in a Georgia saltmarsh during winter and summer. Pore waters collected at 1- to 2-cm intervals were analyzed for pH, alkalinity, dissolved phosphate, ammonium, Fe(II), Fe(III), Mn(II), sulfide, sulfate, and organic carbon. Sediments were collected at 5-cm intervals and analyzed for iron distribution in the solid phase using a two-step sequential extraction. The upper 50 cm of the sediment pore waters are mostly sulfidic during both winter and summer. The pore water and sediment geochemistry suggest organic matter degradation is coupled mostly to Fe(III) and sulfate reduction. In summer, there is greater accumulation of alkalinity, sulfide, ammonium, and phosphate in the pore waters and lower levels of ascorbate extractable Fe, which is presumed to be comprised primarily of readily reducible Fe(III) oxides, in the sediments, consistent with higher organic matter degradation rates in summer compared to winter. Lower pH, alkalinity, ammonium, and sulfide concentrations in sediments with Juncus, compared to nearby unvegetated sediments, is consistent with release of oxygen into the Juncus rhizosphere, especially during summer.     

A comparison of the early diagenetic environment in intertidal sands and muds of the Manukau Harbour,New Zealand

The early diagenetic environment of intertidal sandy sediments (sands) and muddy sediments (muds) is described and compared from two cores taken from an unpolluted part of the Manukau Harbour, New Zealand. Extraction techniques characterized the form of the trace elements (Fe, Mn, S, C, Pb, Zn, Cu) at different depths in the sediment. Dissolved forms of Fe, Mn, and S were measured in interstitial water. Nonresidual metal concentrations, humic acid, FeS, and FeS₂ are an order of magnitude higher in the muds than in the sands because of dilution by unreactive sand particles. Muds contain a larger proportion of metals in the mobile fractions; exchangeable (Mn), carbonate (Mn, Fe, Zn), and easily-reducible oxide (Fe, Mn, Zn, Pb). This is due to greater surface area (for Mn adsorption); the favorable conditions for MnCO₃, FeCO₃, and FeS precipitation; and higher concentrations of easily reducible iron oxide and humic acid. Therefore, compared to the sands, muds are more important as reservoirs for toxic metals, both in terms of quantity and availability. At either site there was very little difference between the forms of Zn, Pb or Cu identified by sequential extraction as sediments changed from oxic to anoxic conditions. One reason for this is that the amounts and proportions of some of the important components that bind metals, viz., amorphous iron hydrous oxides, humic acids, and FeS₂, do not change much. Other components that do change with redox conditions, for example, manganese phases and FeS, are only minor components of the sediment. Redox conditions, then, have relatively little effect on trace-metal partitioning in the sediment matrix of these unpolluted sediments.     

Effects of Bioirrigation and Salinity on Arsenic Distributions in Ferruginous Concretions from Salt Marsh Sediment Cores (Southern Brazil)

Arsenic (As), iron (Fe), and manganese (Mn) contents were measured in sediment nodules and associated pore waters obtained from sediment cores collected from a salt marsh on Pólvora Island (southern Brazil). Sediment cores were obtained when brackish water dominated the estuary, at two different environments: an unvegetated mudflat colonized by crabs (Neohelice granulata), and a low intertidal stand vegetated by Spartina alterniflora. We determined the percentage of nodules in each depth interval of the cores, along with redox potential, and As, Fe, and Mn contents of the nodules. The mineralogy of the nodules was investigated, and results showed they are mainly composed by quartz, phyllosilicates, and amorphous Fe–Mn oxides/oxyhydroxides. Pore water results showed that bioturbation by local crabs supports oxygen penetration to depths of ca. 25 cm below the salt marsh surface, with lower Fe contents in pore water associated with the brackish period. However, S. alterniflora growth appears to have a greater impact on sediment geochemistry of Fe, Mn, and possibly As due to sulfate reduction and the associated decrease in pore water pH. Higher Fe concentrations were observed in the pore waters during the period of brackish water dominance, which also corresponded to the S. alterniflora growth season. The study demonstrates that differences in geochemical conditions (e.g., Fe content) that can develop in salt marsh sediments owing to different types of bioirrigation processes (i.e., bioirrigation driven by crabs versus that related to the growth of S. alterniflora) play important roles in the biogeochemical cycling of As.

     

Sulfur speciation and associated trace metals (Fe,Cu) in the pore waters of Great Marsh,Delaware

The pore waters of sediments from a salt marsh along the Delaware estuary have been analyzed for sulfur species and associated trace metals. Since the sediment interface is usually in contact with the atmosphere, the sulfur species are dependent on the production of hydrogen sulfide by sulfate reduction and subsequent oxidation by diffusing oxygen. The most important species observed are hydrogen sulfide, polysulfide ions and thiosulfate. Secondary reactions of hydrogen sulfide and polysulfides with decomposing organic matter yield significant concentrations of both thiols and organic polysulfides. Upon isolation of the sediment from the atmosphere due to tidal inundation, bacterial sulfate reduction becomes the dominant process. This results in the reduction of the polysulfides in agreement with thermodynamic predictions, and suggests that the redox couple sulfide/polysulfide is a good redox indicator under such reducing environments.The concentrations of trace elements Cu and Fe in the pore waters are mainly controlled by sulfide formation. Calculations show that copper is strongly complexed probably with organo-sulfur ligands. Iron might be complexed as such sulfur species to a much lesser extent than copper.     

Trace metal dynamics in a seasonally anoxic lake

Selected results are presented from a detailed 12-month study of trace metals in a seasonally anoxic lake. Dissolved concentrations of Fe, Mn, organic carbon, Cd, Cu, Pb, Zn, and pH were determined in the water column and the interstitial waters on 39 occasions. Trace metal concentrations remained low throughout the year in both water column and pore waters. There was evidence for some remobilization at the sediment-water interface but sediments deeper than 3 cm acted as a sink throughout the year. Variations in the water concentrations were largely associated with increased loading during periods of heavy rainfall. During the summer, concentrations of Cu and Zn in the waters overlying the sediments were enhanced by release from decomposing algal material. Similarly, enhanced concentrations of Cd, Cu, Pb, and Zn were observed during periods of much reduced mixing during ice-cover. Although there were large seasonal variations in the concentrations of dissolved and particulate Fe and Mn, there were no comparable changes in the concentrations of trace metals.     

Insights on geochemical cycling of U, Re and Mo from seasonal sampling in Boston Harbor, Massachusetts, USA

This study examined the removal of U, Mo, and Re from seawater by sedimentary processes at a shallow-water site with near-saturation bottom water O₂ levels (240-380 μmol O₂/L), very high organic matter oxidation rates (annually averaged rate is 880 μmol C/cm²/y), and shallow oxygen penetration depths (4 mm or less throughout the year). Under these conditions, U, Mo, and Re were removed rapidly to asymptotic pore water concentrations of 2.2-3.3 nmol/kg (U), 7-13 nmol/kg (Mo), and 11-14 pmol/kg (Re). The depth order in which the three metals were removed, determined by fitting a diffusion-reaction model to measured profiles, was Re < U < Mo. Model fits also suggest that the Mo profiles clearly showed the presence of a near-interface layer in which Mo was added to pore waters by remineralization of a solid phase. The importance of this solid phase source of pore water Mo increased from January to October as the organic matter oxidation rate increased, bottom water O₂ decreased, and the O₂ penetration depth decreased. Experiments with in situ benthic flux chambers generally showed fluxes of U and Mo into the sediments. However, when the overlying water O₂ concentration in the chambers was allowed to drop to very low levels, Mn and Fe were released to the overlying water along with the simultaneous release of Mo and U. These experiments suggest that remineralization of Mn and/or Fe oxides may be a source of Mo and perhaps U to pore waters, and may complicate the accumulation of U and Mo in bioturbated sediments with high organic matter oxidation rates and shallow O₂ penetration depths.Benthic chamber experiments including the nonreactive solute tracer, Br⁻, indicated that sediment irrigation was very important to solute exchange at the study site. The enhancement of sediment-seawater exchange due to irrigation was determined for the nonreactive tracer (Br⁻), TCO₂, , U and Mo. The comparisons between these solutes showed that reactions within and around the burrows were very important for modulating the Mo flux, but less important for U. The effect of these reactions on Mo exchange was highly variable, enhancing Mo (and, to a lesser extent, U) uptake at times of relatively modest irrigation, but inhibiting exchange when irrigation rates were faster. These results reinforce the observation that Mo can be released to and removed from pore waters via sedimentary reactions.The removal rate of U and Mo from seawater by sedimentary reactions was found to agree with the rate of accumulation of authigenic U and Mo in the solid phase. The fluxes of U and Mo determined by in situ benthic flux chamber measurements were the largest that have been measured to date. These results confirm that removal of redox-sensitive metals from continental margin sediments underlying oxic bottom water is important, and suggest that continental margin sediments play a key role in the marine budgets of these metals.     

Biogeochemical redox cycling of arsenic in mine-impacted lake sediments and co-existing pore waters near Giant Mine,Yellowknife Bay,Canada

Lacustrine sediments, submerged tailings, and their pore waters have been collected at several sites in Yellowknife Bay, Great Slave Lake, Canada, in order to investigate the biogeochemical controls on the remobilization of As from mining-impacted materials under different depositional conditions. Radiometric dating confirms that a mid-core enrichment of Pb, Zn, Cu and Sb corresponds to the opening of a large Au mine 60 a ago. This was evident even in a relatively remote site. Arsenic was enriched at mid-core, coincident with mining activity, but clearly exhibited post-depositional mobility, migrating upwards towards the sediment water interface (SWI) as well as down-core. Deep-water (15 m) Yellowknife Bay sediments that contain buried mine waste are suboxic, relatively organic-rich and abundant in microbes with As in pore waters and sediments reaching 585 μg/L and 1310 mg/kg, respectively. Late summer pore waters show equal proportions of As(III) and As(V) (16–415 μg/L) whereas late winter pore waters are dominated by As(III) (284–947 μg/L). This can be explained by As(III) desorption mechanisms associated with the conversion of FeS to FeS₂ and the reduction of As(V) to As(III) through the oxidation of dissolved sulfide, both microbially-mediated processes. Processes affecting As cycling involve the attenuating efficiency of the oxic zone at the SWI, sediment redox heterogeneity and the reductive dissolution of Fe(hydr)oxides by labile organic matter, temporarily and spatially variable.     

The Association of Cobalt with Iron and Manganese (Oxyhydr)oxides in Marine Sediment

Formation and dissolution of authigenic Fe and Mn (oxyhydr)oxides influence cycling of trace metals in oxic/suboxic surface sediments. We used the diffusive gradients in thin films technique (DGT) to estimate the association of cobalt with iron and manganese oxides. We compared Co, Fe and Mn maxima measured by DGT in the pore waters of fresh and aged marine sediment cores and estimated the Co/Fe and Co/Mn ratios in the metal oxides. A Mn maximum was not visible in DGT concentration profiles of freshly collected sediment cores, but after ageing the sediment, we observed a distinct Mn peak, presumably due to broadening of the depth range over which the various electron acceptors occur. Estimated Co/Mn ratios from both experiments are within the range of literature values for marine sediments, but the value from the aged experiment is at the lower end of the range. This is attributed to stimulation of sulphate reduction and precipitation of cobalt sulphides. The good correlation between Co and Fe maxima in the fresh sediments is attributed to the similarity of their reactions with sulphide rather than Co being released during authigenic Fe oxide reduction.     

Post-depositional redistribution processes and their effects on middle rare earth element precipitation and the cerium anomaly in sediments in the South Korea Plateau,East Sea

We sampled two box-core sediments from the slope of the eastern South Korea Plateau (SKP) in the East Sea (Sea of Japan) at water depths of 1400 and 1700 m. Two chemical fractions of extractable (hydroxylamine/acetic acid) and residual rare earth elements (REEs) together with Al, Ca, Fe, Mg, Mn, P, S, As, Mo, and U were analyzed to assess the post-depositional redistribution of REEs. Extractable Fe and Mn are noticeably abundant in the oxic topmost sediment layer (<3 cm). However, some trace elements (e.g., S, As, Mo, U) are more abundant at depth, where redox conditions are different. Analysis of upper continental crust (UCC)-normalized (La/Gd)_UCC, (La/Yb)_UCC, and (Ce/Ce^*)_UCC revealed that the extractable REE is characterized by middle REE (MREE) enrichment and a positive cerium (Ce) anomaly, different from the case of the residual fraction which shows slight enrichment in light REEs (LREEs) with no Ce anomaly. The extractable MREEs seem to have been incorporated into high-Mg calcite during reductive dissolution of Fe oxyhydroxides. In the top sediment layer, the positive Ce anomaly is attributed to Ce oxide, which can be mobilized in deeper oxygen-poor environments and redistributed in the sediment column. In addition, differential concentrations of Ce and other LREEs in pore water appear to result in variable (Ce/Ce^*)_UCC ratios in the extractable fraction at depth.     

Partitioning of heavy metals in surface Black Sea sediments

Bulk heavy metal (Fe, Mn, Co, Cr, Ni, Cu, Zn and Pb) distributions and their chemical partitioning, together with TOC and carbonate data, were studied in oxic to anoxic surface sediments (0–2 cm) obtained at 18 stations throughout the Black Sea. TOC and carbonate contents, and available hydrographic data, indicate biogenic organic matter produced in shallower waters is transported and buried in the deeper waters of the Black Sea. Bulk metal concentrations measured in the sediments can be related to their geochemical cycles and the geology of the surrounding Black Sea region. Somewhat high Cr and Ni contents in the sediments are interpreted to reflect, in part, the weathering of basic-ultrabasic rocks on the Turkish mainland. Maximum carbonate-free levels of Mn (4347 ppm), Ni (355 ppm) and Co (64 ppm) obtained for sediment from the shallow-water station (102 m) probably result from redox cycling at the socalled ‘Mn pump zone’ where scavenging-precipitation processes of Mn prevail. Chemical partitioning of the heavy metals revealed that Cu, Cr and Fe seem to be significantly bound to the detrital phases whereas carbonate phases tend to hold considerable amounts of Mn and Pb. The sequential extraction procedures used in this study also show that the metals Fe, Co, Ni, Cu, Zn and Pb associated with the ‘oxidizable phases’ are in far greater concentrations than the occurrences of these metals with detrital and carbonate phases. These results are in good agreement with the recent studies on suspended matter and thermodynamic calculations which have revealed that organic compounds and sulfides are the major metal carriers in the anoxic Black Sea basin, whereas Fe-Mn oxyhydroxides can also be important phases of other metals, especially at oxic sites. This study shows that, if used with a suitable combination of the various sequential extraction techniques, metal partitioning can provide important information on the varying geological sources and modes of occurrence and distribution of heavy metals in sediments, as well as, on the physical and chemical conditions prevailing in an anoxic marine environment.     

沉积物微量金属元素在重建水体环境变化中的意义

沉积物所记录的微量金属含量与形态的变化是指示人类活动影响下水体环境变化的有效指标,主要用于指示沉积物重金属污染、水体初级生产力变化和氧化还原条件等方面的水体环境状况。总体而言,沉积物中微量金属含量在近一个世纪以来显著上升,反映了采矿、冶金、污水排放、化肥使用、煤炭和石油燃烧等各种人类活动造成水体和沉积物重金属污染的记录作为浮游植物微量营养元素,Cu、Zn、Ni、Ba、Cd等在沉积物中的记录可以指示水体初级生产力水平。U、Mo、V、Cu、Cd、Mn等氧化还原敏感元素在沉积物中的富集或贫化,及其比值(如Re/Mo、Cd/U、Th/U和V/Sc)的变化,是指示水体和沉积物氧化还原环境的有效指标。但需要指出的是,在受人类活动影响的水体中,这些生产力和氧化还原指标很少能指示水体生产力或氧化还原状况,可能主要与人类活动同时造成这些金属元素大量污染输入而掩盖了其自生来源和内在变化的沉积记录有关。所以,对沉积物中微量金属元素来源的判别(陆源碎屑输入、人为输入和水体自生来源)是重建水体环境变化的重要前提。本文总结了多种化学和统计学方法(包括同位素示踪法、化学提取法、富集因子法和主成分分析法等)在沉积物金属来源判别中的应用另外,成岩作用等多种因素会干扰沉积物金属记录对环境变化的指示作用,所以构建多元素指标来综合判断沉积物记录所反映的环境信息是今后的研究所必须关注的     

Variations in the isotopic composition of molybdenum in freshwater lake systems

Variations in molybdenum isotopic composition, spanning the range of ∼ 2.3‰ in the terms of ⁹⁷Mo/⁹⁵Mo ratio, have been measured in sediment cores from three lakes in northern Sweden and north-western Russia. These variations have been produced by both isotopically variable input of Mo into the lakes due to Mo isotopic heterogeneity of bedrock in the drainage basins and fractionation in the lake systems due to temporal variations in limnological conditions. Mo isotope abundances of bedrock in the lake drainage basins have been documented by analysis of Mo isotope ratios of a suite of molybdenite occurrences collected in the studied area and of detrital fractions of the lake sediment cores. The median δ⁹⁷Mo value of the investigated molybdenites is 0.26‰ with standard deviation of 0.43‰ (n = 19), whereas the median δ⁹⁷Mo value of detrital sediment fractions from two lakes is − 0.40‰ with standard deviation of 0.36‰ (n = 15).The isotopic composition of Mo in the sediment cores has been found to be dependent on redox conditions of the water columns and the dominant type of scavenging phases. Hydrous Fe oxides have been shown to be an efficient scavenger of Mo from porewater under oxic conditions. Oxidative precipitation of Fe(II) in the sediments resulted in co-precipitation of Mo and significant authigenic enrichment at the redox boundary. In spite of a pronounced increase in Mo concentration associated with Fe oxides at the redox boundary the isotopic composition of Mo in this zone varies insignificantly, suggesting little or no isotope fractionation during scavenging of Mo by hydrous Fe oxides. In a lake with anoxic bottom water a chironomid-inferred reconstruction of O₂ conditions in the bottom water through the Holocene indicates that increased O₂ concentrations are generally associated with low δ⁹⁷Mo/⁹⁵Mo values of the sediments, whereas lowered O₂ contents of the bottom water are accompanied by relatively high δ⁹⁷Mo/⁹⁵Mo values, thus confirming the potential of Mo isotope data to be a proxy for redox conditions of overlying waters. However, it is pointed out that other processes including input of isotopically heterogeneous Mo and Mn cycling in the redox-stratified water column can be a primary cause of variations in Mo isotopic compositions of lake sediments.     

Mercury remobilization in Saguenay Fjord (Quebec,Canada) sediments: Insights following a mass-flow event and its capping efficiency

A mass-flow event triggered by the 1996 flood in the Saguenay region buried the mercury-contaminated indigenous sediments at the head of the Saguenay Fjord under up to 50 cm of postglacial deltaic sediments. The vertical distributions of total mercury and methyl-mercury in the sediments and pore waters were measured in box cores recovered from the Saguenay Fjord within and outside the affected area prior to and on six consecutive years after the flood. The total solid mercury (THg_s) profiles show that remobilization was limited and most of the mercury remobilized from the contaminated, indigenous sediments was trapped below or slightly above the former sediment–water interface by authigenic acid-volatile sulfides (AVS). Nonetheless, a small fraction of the remobilized mercury diffused into the flood layer, some of it was methylated and/or scavenged by organic matter and AVS. Elevated solid-phase methyl-mercury concentrations, [MeHg_s], at depth in the sediment are correlated to peak AVS and THg_s but, in the absence of elevated dissolved methyl-mercury concentrations, [MeHg_d], the higher [MeHg_s] may reflect an earlier episode of Hg methylation, the product of which was scavenged by the AVS and buried. Throughout the sediment cores, sediment–water partitioning of MeHg and Hg(II) appears to be controlled in great part by the AVS and residual organic matter content of the sediment.     

Spatial variation in pore water geochemistry in a mangrove system (Pai Matos island, Cananeia-Brazil)

Spatial variation in salinity, pH, redox potential, and in the concentrations of dissolved Mn, Fe²⁺ and sulphides in pore water were investigated in a mangrove system in the state of São Paulo (Brazil). Total organic C (TOC), S, Fe and Mn were analyzed in the solid phase, along with acid volatile sulphide (AVS), density of roots and percentage of sand. Five zones, situated along the length of a 180 m transect were considered in the study. Four of these were colonized by different species of vascular plants (Spartina, Laguncularia, Avicennia and Rhizophora) and were denominated soils; the other was not colonized by vegetation, and was denominated sediment. The results indicated important differences between the physicochemical conditions of the pore water in the vegetated zones and the sediment. In the former, two geochemical environments were identified, based on soil depths. The upper 20 cm contained the largest quantity of roots, and the conditions were oxic (Eh > 350 mV) or suboxic (Eh: 100–350 mV), acidic, and with high concentrations of Fe and Mn in the pore water. Below this depth, the soil became anoxic, the concentration of sulphides (HS⁻) increased significantly and the concentrations of dissolved Fe and Mn decreased significantly. The total S and the AVS fraction increased with depth, while TOC concentrations decreased, indicating that the decreases in Fe and Mn were due to the precipitation of metal sulphides. However, clear differences among the vegetated zones were not observed. The sediment was always anoxic, but with low concentrations of sulphide in the interstitial water, and was neutral or slightly alkaline. As in the soils, the concentrations of sulphides and total S increased significantly with depth, indicating that the conditions favoured the synthesis and stability of metal sulphides.