共查询到20条相似文献,搜索用时 31 毫秒
1.
Central Fujian Rift is another new and important volcanogenic massive sulfide Pb-Zn polymetallic metallogenetic belt. In order to find out the material genesis and mineralization period of Meixian-type Pb-Zn-Ag deposits, S and Pb isotope analysis and isotope geochronology of ores and wall rocks for five major deposits are discussed. It is concluded that the composition of sulfur isotope from sulfide ore vary slightly in different deposits and the mean value is close to zero with the 834S ranging from -3.5‰ to +5.6‰ averaging at +2.0‰, which indicates that the sulfur might originate from magma or possibly erupted directly from volcano or was leached from ore-hosted volcanic rock. The lead from ores in most deposits displays radioactive genesis character (206pb/204pb〉18.140, 207Pb/204pb〉15.584, 208pb/204pb〉38.569) and lead isotope values of ores are higher than those of wall rocks, which indicates that the lead was likely leached from the ore-hosted volcanic rocks. Based on isotope data, two significant Pb-Zn metallogenesis are delineated, which are Mid- and Late-Proterozoic sedimentary exhalative metailogenesis (The single zircon U-Pb, Sm-Nd isochronal and Ar-Ar dating ages of ore- hosted wall rocks are calculated to be among 933-1788 Ma.) and Yanshanian magmatic hydrothermal superimposed and alternated metallogenesis (intrusive SHRIMP zircon U-Pb and Rb-Sr isochronal ages between 127-154 Ma). 相似文献
2.
《International Geology Review》2012,54(7):904-916
Located in the western Yangtze Block, the Qingshan Pb–Zn deposit, part of the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic province, contains 0.3 million tonnes of 9.86 wt.% Pb and 22.27 wt.% Zn. Ore bodies are hosted in Carboniferous and Permian carbonate rocks, structurally controlled by the Weining–Shuicheng anticline and its intraformational faults. Ores composed of sphalerite, galena, pyrite, dolomite, and calcite occur as massive, brecciated, veinlets, and disseminations in dolomitic limestones. The C–O isotope compositions of hydrothermal calcite and S–Pb–Sr isotope compositions of Qingshan sulphide minerals were analysed in order to trace the sources of reduced sulphur and metals for the Pb–Zn deposit. δ13CPDB and δ18OSMOW values of calcite range from –5.0‰ to –3.4‰ and +18.9‰ to +19.6‰, respectively, and fall in the field between mantle and marine carbonate rocks. They display a negative correlation, suggesting that CO2 in the hydrothermal fluid had a mixed origin of mantle, marine carbonate rocks, and sedimentary organic matter. δ34S values of sulphide minerals range from +10.7‰ to +19.6‰, similar to Devonian-to-Permian seawater sulphate (+20‰ to +35‰) and evaporite rocks (+23‰ to +28‰) in Carboniferous-to-Permian strata, suggesting that the reduced sulphur in hydrothermal fluids was derived from host-strata evaporites. Ores and sulphide minerals have homogeneous and low radiogenic Pb isotope compositions (206Pb/204Pb = 18.561 to 18.768, 207Pb/204Pb = 15.701 to 15.920, and 208Pb/204Pb = 38.831 to 39.641) that plot in the upper crust Pb evolution curve, and are similar to those of Devonian-to-Permian carbonate rocks. Pb isotope compositions suggest derivation of Pb metal from the host rocks. 87Sr/86Sr ratios of sphalerite range from 0.7107 to 0.7136 and (87Sr/86Sr)200Ma ratios range from 0.7099 to 0.7126, higher than Sinian-to-Permian sedimentary rocks and Permian Emeishan flood basalts, but lower than Proterozoic basement rocks. This indicates that the ore strontium has a mixture source of the older basement rocks and the younger cover sequence. C–O–S–Pb–Sr isotope compositions of the Qingshan Pb–Zn deposit indicate a mixed origin of the ore-forming fluids and metals. 相似文献
3.
Many metallic ore deposits of the Late Cretaceous to Early Tertiary periods are distributed in the Gyeongsang Basin. Previous and newly analyzed sulfur isotope data of 309 sulfide samples from 56 ore deposits were reviewed to discuss the genetic characteristics in relation to granitoid rocks. The metallogenic provinces of the Gyeongsang Basin are divided into the Au–Ag(–Cu–Pb–Zn) province in the western basin where the sedimentary rocks of the Shindong and Hayang groups are distributed, Pb–Zn(–Au–Ag–Cu), Cu–Pb–Zn(–Au–Ag), and Fe–W(–Mo) province in the central basin where the volcanic rocks of the Yucheon Group are dominant, and Cu(–Mo–W–Fe) province in the southeastern basin where both sedimentary rocks of the Hayang Group and Tertiary volcanic rocks are present. Average sulfur isotope compositions of the ore deposits show high tendencies ranging from 2.2 to 11.7‰ (average 5.4‰) in the Pb–Zn(–Au–Ag–Cu) province, ?0.7 to 11.5‰ (average 4.6‰) in the Cu–Pb–Zn(–Au–Ag) province, and 3.7 to 11.4‰ (average 7.5‰) in the Fe–W(–Mo) province in relation to magnetite‐series granitoids, whereas they are low in the Au–Ag(–Cu–Pb–Zn) province in relation to ilmenite‐series granitoids, ranging from ?2.9 to 5.7‰ (average 1.7‰). In the Cu(–Mo–W–Fe) province δ34S values are intermediate ranging from 0.3 to 7.7‰ (average 3.6‰) and locally high δ34S values are likely attributable to sulfur derived from the Tertiary volcanic rocks during hydrothermal alteration through faults commonly developed in this region. Magma originated by the partial melting of the 34S‐enriched oceanic plate intruded into the volcanic rocks and formed magnetite‐series granitoids in the central basin, which contributed to high δ34S values of the metallic deposits. Conversely, ilmenite‐series granitoids were formed by assimilation of sedimentary rocks rich in organic sulfur that influenced the low δ34S values of the deposits in the western and southeastern provinces. 相似文献
4.
Nejib JEMMALI Fouad SOUISSI Torsten W. VENNEMANN Emmanuel John M. CARRANZA 《Resource Geology》2011,61(4):367-383
The Jebel Ressas Pb–Zn deposits in North‐Eastern Tunisia occur mainly as open‐space fillings (lodes, tectonic breccia cements) in bioclastic limestones of the Upper Jurassic Ressas Formation and along the contact of this formation with Triassic rocks. The galena–sphalerite association and their alteration products (cerussite, hemimorphite, hydrozincite) are set within a calcite gangue. The Triassic rocks exhibit enrichments in trace metals, namely Pb, Co and Cd enrichment in clays and Pb, Zn, Cd, Co and Cr enrichment in carbonates, suggesting that the Triassic rocks have interacted with the ore‐bearing fluids associated with the Jebel Ressas Pb–Zn deposits. The δ18O content of calcite associated with the Pb–Zn mineralization suggests that it is likely to have precipitated from a fluid that was in equilibrium with the Triassic dolostones. The δ34S values in galenas from the Pb–Zn deposits range from ?1.5 to +11.4‰, with an average of 5.9‰ and standard deviation of 3.9‰. These data imply mixing of thermochemically‐reduced heavy sulfur carried in geothermal‐ and fault‐stress‐driven deep‐seated source fluid with bacterially‐reduced light sulfur carried in topography‐driven meteoric fluid. Lead isotope ratios in galenas from the Pb–Zn deposits are homogenous and indicate a single upper crustal source of base‐metals for these deposits. Synthesis of the geochemical data with geological data suggests that the base‐metal mineralization at Jebel Ressas was formed during the Serravallian–Tortonian (or Middle–Late Miocene) Alpine compressional tectonics. 相似文献
5.
Qingdong Zeng Jianming Liu Tiebing Liu Yuanchao Shen Ping Shen Guangming Li 《Resource Geology》2007,57(3):313-324
The Sawuershan region, one of the important gold metallogenic belts of Xinjiang, is located in the western part of the Kalatongke island arc zone of north Xinjiang, NW China. There are two gold deposits in mining, namely the Kuoerzhenkuola and the Buerkesidai deposits. Gold ores at the Kuoerzhenkuola deposit occur within Carboniferous andesite and volcanic breccias in the form of gold‐bearing quartz–pyrite veins and veinlet groups containing native gold, electrum, pyrite, pyrrhotite and chalcopyrite. Gold ores at the Buerkesidai deposit occur within Carboniferous tuffaceous siltstones in the form of gold‐bearing quartz veinlet groups and altered rocks, with electrum, pyrite and arsenopyrite as major metallic minerals. Both gold deposits are hosted by structurally controlled faults associated with intense hydrothermal alteration. The typical alteration assemblage is sericite + chlorite + calcite + quartz, with an inner pyrite–sericite zone and an outer chlorite–calcite–epidote zone between orebodies and wall rocks. δ34S values (0.3–1.3‰) of pyrite of ores from Kuoerzhenkuola deposit are similar to those (0.4–2.9‰) of pyrite of ores from Buerkesidai deposit. δ34S values (1.1–2.8‰) of pyrite from altered rocks are similar to δ34S values of magmatic or igneous sulfide sulfur, but higher than those from ores. 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb data of sulfide from ores range within 17.72–18.56, 15.34–15.61, and 37.21–38.28, respectively. These sulfur and lead isotope compositions imply that ore‐forming materials might originate from multiple, mainly deep sources. He and Ar isotope study on fluid inclusions of pyrites from ores of Kuoerzhenkuola and Buerkesidai gold deposits produces 40Ar/36Ar and 3He/4He ratios in the range of 282–525 and 0.6–9.4 R/Ra, respectively, indicating a mixed source of deep‐seated magmatic water (mantle fluid) and shallower meteoric water. In terms of tectonic setting, the gold deposits in the Sawuershan region can be interpreted as epithermal. These formations resulted from a combination of protracted volcanic activity, hydrothermal fluid mixing, and a structural setting favoring gold deposition. Fluid mixing was possibly the key factor resulting in Au deposition in the gold deposits in Sawuershan region. 相似文献
6.
The Angélica copper deposit is situated at the southernmost sector of the Jurassic Tocopilla plutonic complex in the North Chilean Coastal Cordillera. This deposit occurs in monzonitic to monzodioritic rocks, and has platelike orebodies with no appreciable hydrothermal alteration nor sulfide mineralization. The mineralized zones are located in the western side of the two main normal faults with NE and NW orientations, and are characterized principally by impregnation of supergene copper products of atacamite and minor amounts of chrysocolla, lavendulan and “black copper”. Generally, chrysocolla is more abundant at a distal NE sector of the deposit. The black copper is Cu‐Fe‐Mn‐Si‐Cl‐rich multimineral aggregates composed of atacamite with minor amounts of quartz, pseudomalachite, dioptase, neotocite, gypsum, paratacamite and melanothallite, and its surface exhibits nanometer‐sized cylindrical morphologies. All these characteristics suggest an exotic origin for the Angélica copper deposit. A few vein‐type copper deposits situated at the southwestern sector along the NE‐oriented fault are inferred as the possible source of the Angélica copper deposit. 相似文献
7.
变质矿床成因分类的讨论 总被引:2,自引:0,他引:2
在探讨了变质矿床的定义并结合前人研究的基础上,对变质矿床初步提出了一个新的成因分类方案。该方案共分为五个大类和十三个亚类,并对每个大类和亚类都提出了一些代表性矿床实例。新的变质矿床成因分类方案为:(1)受变质矿床类,分为受变质硅铁质建造沉积矿床、受变质硅铁质建造火山–沉积矿床、受变质其它建造沉积–火山沉积矿床、受变质火成岩改造矿床和受变质细碧角斑质火山喷发沉积矿床五个亚类;(2)区域变质作用变成矿床类,分为变质重结晶型、变质化学反应重组型和变质热液型三个亚类;(3)局部变质作用变成矿床类,分为接触交代夕卡岩矿床、局部接触热变质变成矿床和局部动力变质变成矿床三个亚类;(4)受变质沉积–火山沉积变质热液叠加改造矿床类;(5)混合岩化作用形成矿床类,又分为混合岩化交代型和后期混合岩化热液型两个亚类。 相似文献
8.
The Ohori ore deposit is one of the Cu–Pb–Zn deposits in the Green Tuff region, NE Japan, and consists of skarn‐type (Kaninomata) and vein‐type (Nakanomata) orebodies. The former has a unique origin because its original calcareous rocks were made by hydrothermal precipitation during Miocene submarine volcanism. Carbon and oxygen isotope ratios of skarn calcite and sulfur isotope ratios of sulfides were measured in and around the deposit. Carbon and oxygen isotope ratios of the skarn calcite are δ13C = ?15.51 to ?5.1‰, δ18O = +3.6 to +22.5‰. δ13C values are slightly lower than those of the Cretaceous skarn deposits in Japan. These isotope ratios of the Kaninomata skarn show that the original calcareous rocks resemble the present submarine hydrothermal carbonates at the CLAM Site, Okinawa Trough, than Cenozoic limestones, even though some isotopic shifts had occurred during later skarnization. δ34S ratios of the sulfide minerals from the Kaninomata and Nakanomata orebodies are mostly in a narrow range of +4.0 to +7.0‰ and they resemble each other, suggesting the same sulfur origin for the both deposits. The magnetite‐series Tertiary Kaninomatasawa granite is distributed just beneath the skarn layer and has δ34S ratios of +7.5 to 8.1‰. The heavy sulfur isotope ratio of the skarn sulfides may have been affected by the Kaninomatasawa granite. 相似文献
9.
Robert Marschik Tobias Bauer Ana-Sophie Hensler Nikos Skarpelis Stefan Hölzl 《Resource Geology》2010,60(4):335-347
The Pb-Zn-Ba(-Ag-Au) mineralization in the Triades and Galana mine areas is hosted in 2.5–1.4 Ma pyroclastic rocks, and structurally controlled mostly by NE-SW or N-S trending brittle faults. Proximal pervasive silica and distal pervasive sericite-illite alteration are the two main alteration types present at the surface. The distribution of mineralization-alteration in the district suggests at least two hydrothermal events or that hydrothermal activity lasted longer at Galana. The Sr isotope signature of sphalerite and barite (87Sr/86Sr = 0.709162 to 0.710214) and calculated oxygen isotope composition of a fluid in equilibrium with barite and associated quartz at temperatures of around 230°C are suggestive of a seawater hydrothermal system and fluid/rock interaction. Lead isotope ratios of galena and sphalerite (206Pb/204Pb from 18.8384 to 18.8711; 207Pb/204Pb from 15.6695 to 15.6976; 208Pb/204Pb from 38.9158 to 39.0161) are similar to those of South Aegean Arc volcanic and Aegean Miocene plutonic rocks, and compatible with Pb derived from an igneous source. Galena and sphalerite from Triades-Galana have δ34SVCDT values ranging from +1 to +3.6‰, whereas barite sulfate shows δ34SVCDT values from +22.8 to +24.4‰. The sulfur isotope signatures of these minerals are explained by seawater sulfate reduction processes. The new analytical data are consistent with a seawater-dominated hydrothermal system and interaction of the hydrothermal fluid with the country rocks, which are the source of the ore metals. 相似文献
10.
The Tianqiao Pb–Zn deposit in the western Yangtze Block, southwest China, is part of the Sichuan–Yunnan–Guizhou (SYG) Pb–Zn metallogenic province. Ore bodies are hosted in Devonian and Carboniferous carbonate rocks, structurally controlled by a thrust fault and anticline, and carried about 0.38 million tons Pb and Zn metals grading > 15% Pb + Zn. Both massive and disseminated Pb–Zn ores occur either as veinlets or disseminations in dolomitic rocks. They are composed of ore minerals, pyrite, sphalerite and galena, and gangue minerals, calcite and dolomite. δ34S values of sulfide minerals range from + 8.4 to + 14.4‰ and display a decreasing trend from pyrite, sphalerite to galena (δ34Spyrite > δ34Ssphalerite > δ34Sgalena). We interpret that reduced sulfur derived from sedimentary sulfate (gypsum and barite) of the host Devonian to Carboniferous carbonate rocks by thermal–chemical sulfate reduction (TSR). δ13CPDB and δ18OSMOW values of hydrothermal calcite range from –5.3 to –3.4‰ and + 14.9 to + 19.6‰, respectively, and fall in the field between mantle and marine carbonate rocks. They display a negative correlation, suggesting that CO2 in the hydrothermal fluid was a mixture origin of mantle, marine carbonate rocks and sedimentary organic matter. Sulfide minerals have homogeneous and low radiogenic Pb isotope compositions (206Pb/204Pb = 18.378 to 18.601, 207Pb/204Pb = 15.519 to 15.811 and 208Pb/204Pb = 38.666 to 39.571) that are plotted in the upper crust Pb evolution curve and overlap with that of Devonian to Carboniferous carbonate rocks and Proterozoic basement rocks in the SYG province. Pb isotope compositions suggest derivation of Pb metal from mixed sources. Sulfide minerals have 87Sr/86Sr ratios ranging from 0.7125 to 0.7167, higher than Sinian to Permian sedimentary rocks and Permian Emeishan flood basalts, but lower than basement rocks. Again, Sr isotope compositions are supportive of a mixture origin of Sr. They have an Rb–Sr isotopic age of 191.9 ± 6.9Ma, possibly reflecting the timing of Pb–Zn mineralization. C–O–S–Pb–Sr isotope compositions of the Tianqiao Pb–Zn deposit indicate a mixed origin of ore-forming fluids, which have Pb–Sr isotope homogenized before the mineralization. The Permian flood basalts acted as an impermeable layer for the Pb–Zn mineralization hosted in the Devonian–Carboniferous carbonate rocks. 相似文献
11.
The Kooh-Shah region located in a Tertiary volcanic-plutonic belt of the Lut Block in eastern Iran comprises several subvolcanic intermediate to acidic intrusive rocks, diorite to syenite in composition, which have intruded into volcanic rocks. The Kooh-Shah granitoid rocks are characterized by enrichment in large ion-lithophile elements (LILE: e.g. Sr, Ba, Rb) and depletion in high field-strength elements (HFSE: e.g. Nb, Ta, Ti). The chondrite-normalized REE patterns are characterized by moderate LREE enrichment (La/Yb)N=6.01-10.01, medium-heavy REE enrichment, and absence of Eu anomalies. The Kooh-Shah intrusive rocks are metaluminous, shoshonitic with calc-alkaline affinity and high values of magnetic susceptibility, and classified as the magnetite-series of oxidant I-type granitoids. The age of Kooh-Shah granitoid rocks based on zircon U-Pb age dating is 39.7±0.7 Ma (=Middle Eocene) and the ranges of their initial 87Sr/86Sr and 143Nd/144Nd ratios are from 0.704812 to 0.704920 and 0.512579 to 0.512644, respectively, when recalculated to an age of 39 Ma. The initial ?Nd isotope values for the Kooh-Shah intrusive rocks range from -0.18 to 1.09. This geochemical data indicates that the Kooh-Shah granitoid rocks formed from depleted mantle in an island arc setting. The geochemical signature of the studied granitoid rocks represents a characteristic guide for future exploration of copper-gold porphyry-type deposits in the Lut block. 相似文献
12.
Granitoid Types Related to Cretaceous Plutonic Au-Quartz Vein and Cu-Fe Skarn Deposits, Kitakami Mountains, Japan 总被引:1,自引:0,他引:1
Abstract. Early Cretaceous granitic intrusions are associated with Au‐quartz veins and Cu‐Fe skarns in the the Kitakami Mountains, which are underlain by the late Paleozoic of continental margin‐type sedimentary rocks and Mesozoic accretionary complexes. The plutonic rocks are divided into potassic, high‐Sr/Y calc‐alkaline and low‐Sr/Y calc‐alkaline series. All the metallic mineral deposits are spatially associated with small stocks and plugs; they show no consistent association with the larger plutonic bodies. The plutonic rocks generally belong to the magnetite series but less oxidized in the southwestern part of the Kitakami Mountains where Au‐quartz veins occur. The gold deposits are classified into high and low sulfide types. The high sulfide type contains a high volume of sulfide minerals mostly of chalcopyrite, arsenopyrite and pyrrhotite with low bulk Au/Ag ratios. This type occurs almost exclusively in and surrounding the Orikabe pluton, including two most important gold deposits (Oya and Kohoku) of the Kitakami Mountains. The pluton is composed of potassic gabbroids, potassic granitoids of the shoshonite ‐ high‐K calc‐alkaline series (Orikabe type), and less potassic Sasamori‐type granodiorite. All these rocks belong to a moderately oxidized magnetite series. The Orikabe pluton has one of the lowest initial Sr ratio (0.70392) in the Kitakami Mountains, and the Au‐Cu‐dominant ore components of the high sulfide type Au deposits are considered magmatic in origin carried by the juvenile magmas from the upper mantle. The low sulfide type is generally plain quartz vein with a low volume of sulfides and a high bulk Au/Ag ratio. The associated minerals are often scheelite and/or arsenopyrite and pyrrhotite. The ore deposits include historically famed Au‐quartz veins at Shishiori and Ogayu. They are widespread in the southwestern Kitakami Mountains and may be later than the high sulfide type in age, and are hosted most commonly in the sedimentary rocks, which surround small weakly oxidized magnetite‐series plutons of low to intermediate Sr/Y series. These less differentiated intrusions typically include quartz dior‐ite and granodiorite. Some ore components of this type may have derived from the host sedimentary rocks. Among other mineral deposit types in the region, the largest ore deposit is Kamaishi Cu‐Fe skarn (magnetite ores of 58 MT, Fe 50–64 %; Cu 143 KT). It is related to the high‐Sr/Y series Ganidake granodiorite stock, which is a strongly oxidized magnetite‐series body. In contrast, the second largest deposit in the mountains, Akagane deposit, is a similar‐type skarn but associated with an intrusion classified as less oxidized, ilmenite to intermediate series, and that is intermediate in Sr/Y of calc‐alkaline series granodiorite. Degree of magmatic differentiation appears to be not critical factor in the formation of Au‐quartz vein and Cu‐Fe skarn deposits in the region, but is definitely significant for controlling the distribution of the Mo‐mineralization to the east. 相似文献
13.
Neng‐Ping Shen Jian‐Tang Peng Rui‐Zhong Hu Shen Liu Ian M. Coulson 《Resource Geology》2011,61(1):52-62
The Xujiashan antimony deposit is hosted by marine carbonates of the Upper Sinian Doushantuo and Dengying Formations in Hubei Province, South China. Our Sr isotopic data from pre‐ and syn‐mineralization calcites that host the mineralization show that the pre‐mineralization calcite displays a narrow range of 87Sr/86Sr ratios (0.7096 to 0.7097), similar to the ratios of the Sinian seawater, and high Sr concentrations (2645 to 8174 ppm). In contrast, the syn‐mineralization calcite exhibits low Sr concentrations (785 to 2563 ppm) and high 87Sr/86Sr ratios (0.7109 to 0.7154), which is interpreted as the result of addition of radiogenic strontium during the antimony mineralization. The study of Sr isotopes suggests that their Sr component to the pre‐mineralization calcite derived directly from the host rocks (i.e. the Sinian marine carbonates), while radiogenic 87Sr for the syn‐mineralization calcite derived from the underlying Mesoproterozoic Lengjiaxi Group basement through hydrothermal fluid circulation along the major fault that hosts the mineralization. The Pb isotopic ratios of stibnite are subdivided into two groups (Group A and Group B), Group A is characterized by higher radiogenic lead, with 206Pb/204Pb = 18.874 to 19.288, 207Pb/204Pb = 15.708 to 15.805, and 208Pb/204Pb = 38.642 to 39.001. Group B shows lower lead isotope ratios (206Pb/204Pb = 17.882 to 18.171, 207Pb/204Pb = 15.555 to 15.686, and 208Pb/204Pb = 37.950 to 38.340). The single‐stage model ages of Group A are mainly negative or slightly positive values (‐258 to 3 Ma), while those of Group B range from 636 to 392 Ma, with an average of 495 ± 65 Ma. In addition, there are positive linear correlations among Pb isotopic ratios. These results suggest that the lead of Group A stibnite was mainly derived from the Sinian marine carbonates, and that of Group B stibnite from the underlying Lengjiaxi Group basement. This conclusion is consistent with the results of the Sr isotopes. These results indicate that the Xujiashan deposit is not syngenetic sedimentary and in situ reworked origin as previously considered. The metal (mainly Sb) of this deposit was not only derived from the Sinian host rocks, but also partly derived from the underlying Mesoproterozoic Lengjiaxi Group basement. 相似文献
14.
《Ore Geology Reviews》2009,35(4):597-609
The magma–ore deposit relationship of most low-sulfidation epithermal ore deposits is still unclear, partly because many stable isotopic studies of such deposits have indicated the predominance of meteoric waters within hydrothermal fluids. However, it is certainly true that hydrothermal systems are ultimately driven by magmatic intrusions, and epithermal gold deposits might therefore be produced by magmatic activity even in deposits having has no obvious links to a magma. We re-examine the genesis of two typical low-sulfidation epithermal gold deposits, the Kushikino and Hishikari deposits, using structural simulations and isotope data.Many epithermal gold deposits including the Kushikino and Hishikari deposits have been discovered in Kyushu, southwestern Japan. The Kushikino deposit comprises fissure-filling veins within Neogene andesitic volcanics that overlie unconformably Cretaceous sedimentary basement. The veins consist of gold- and silver-bearing quartz and calcite with minor amounts of adularia, sericite and sulfides. Although carbon and oxygen isotopic data for the veins indicate a meteoric origin of the ore fluid, finite element simulations suggest that the vein system might have formed in direct response to magma intrusion. In particular, geophysical data suggest that intruding magma has uplifted the basement rocks, thereby producing fractures and veins and a positive Bouguer anomaly, and providing the heat necessary to drive an ore-forming hydrothermal system.The second component of this study has been to investigate the nature and evolution of the Kushikino and Hishikari epithermal systems. Isotope data document the geochemical evolution of the hydrothermal fluids. We conclude that the existence of sedimentary basement rocks at depth might have affected the strontium and carbon isotopic ratios of the Kushikino and Hishikari ore fluids. The 87Sr/86Sr ratios and δ13C–δ18O trend reveal that major ore veins in the Hishikari deposit can be distinguished from shallow barren veins. It was suggested isotopically that fluids responsible for the barren veins in nearby shallow and barren circulation systems were only controlled by the shallow host rocks. Such multi-isotope systematics provide a powerful tool with which to determine the center of hydrothermal activity and thereby document the evolution of hydrothermal fluids. 相似文献
15.
The Miduk porphyry copper deposit is located in Kerman province, 85 km northwest of the Sar Cheshmeh porphyry copper deposit, Iran. The deposit is hosted by Eocene volcanic rocks of andesitic–basaltic composition. The porphyry‐type mineralization is associated with two Miocene calc‐alkaline intrusive phases (P1 and P2, respectively). Five hypogene alteration zones are distinguished at the Miduk deposit, including magnetite‐rich potassic, potassic, potassic–phyllic, phyllic and propylitic. Mineralization occurs as stockwork, dissemination and nine generations (magnetite, quartz–magnetite, barren quartz, quartz‐magnetite‐chalcopyrite‐anhydrite, chalcopyrite–anhydrite, quartz‐chalcopyrite‐anhydrite‐pyrite, quartz‐molybdenite‐anhydrite ± chalcopyrite ± magnetite, pyrite, and quartz‐pyrite‐anhydrite ± sericite) of veinlets and veins. Early stages of mineralization consist of magnetite rich veins in the deepest part of the deposit and the main stage of mineralization contains chalcopyrite, magnetite and anhydrite in the potassic zone. The high intensity of mineralization is associated with P2 porphyry (Miduk porphyry). Based on petrography, mineralogy, alteration halos and geochemistry, the Miduk porphyry copper deposit is similar to those of continental arc setting porphyry copper deposits. The Re‐Os molybdenite dates provide the timing of sulfide mineralization at 12.23 ± 0.07 Ma, coincident with U/Pb zircon ages of the P2 porphyry. This evidence indicates a direct genetic relationship between the Miduk porphyry stock and molybdenite mineralization. The Re‐Os age of the Miduk deposit marks the main stage of magmatism and porphyry copper formation in the Central Iranian volcano‐plutonic belt. 相似文献
16.
《International Geology Review》2012,54(11):1054-1067
China is one of the richest countries in the world in terms of fluorite resources. On the basis of host rocks and mineralization patterns, the fluorite deposits in China have been classified into three types: (1) those occurring in Mesozoic volcanic regions, mainly consisting of veinfilling deposits of the quartz-fluorite association (Type I); (2) those occurring in granite areas, chiefly belonging to veinfilling deposits of the quartz-fluorite association or veinfilling or altered-rock deposits associated with Pb, Zn, W, Sn, etc. (Type II); and (3) those occurring in carbonate rocks as bedded deposits of quartz-fluorite, sulfide-fluorite, and quartz-barite-calcite-fluorite assemblages (Type III). This paper summarizes the characteristics of fluorite deposits in China on the basis of strontium-, hydrogen-, and oxygen-isotopic and geochronological data, as well as geological investigations of deposits from 22 mining districts. δ18O and δD values of ore-forming fluids are ?10.2 to +3.7‰ and ?77.9 to 41.0‰, respectively, for Type-I deposits, ?13.1 to ?4.9‰ and ?65.5 to ?41.7‰ for Type-II deposits, and -5.6 to +4.3‰ and ?80 to ?29‰ for Type-Ill deposits. Study of the isotopic water-rock exchange indicates that the mineralizing fluids for these types of deposits have been derived mostly from circulating geothermal water that originated from Mesozoic meteoric water. The differences in the isotopic characteristics of hydrothermal systems for various types of deposits depend mainly on isotopic exchange between water and rocks, the water/rock values being 0.05 to 2.0 for Type-I deposits, generally more than 2.0 for Type-II deposits, and 0.5 to 3.0 for Type-Ill deposits. The ore-forming ages for Type-I and Type-II deposits are roughly separated into three groups—230 to 180 Ma, 120 Ma, and 90 to 60 Ma. These ages successively decrease from northwestern China to southeastern coastal areas. 87Sr/86Sr values of 0.7306 to 0.7710 (mean 0.7513) from fluorite in the early stage (main mineralization) for Type-I deposits are higher than those from host rocks (0.7081 to 0.7260) during the mineralizing event, and mostly fall in the range of 87Sr/86Sr values from basement metamorphic rocks (from 0.7455 to 0.9094) during the epoch of mineralization. But the 87Sr/86Sr values of 0.7102 to 0.7137 (mean 0.7122) for late-stage fluorite and calcite are similar to those of surrounding host rocks. This indicates that the mineralizing materials of early stages in the formation of deposits (Type-I) originated mostly from Precambrian basement metamorphic rocks; those of later stages (Type II) were derived chiefly from host rocks. Type-II and Type-Ill deposits from different mining areas exhibit great variations in 87Sr/86Sr values, but are quite similar to their host rocks, indicating that the mineralizing materials in Type-II and Type-Ill deposits were derived chiefly from their host rocks. 相似文献
17.
张立生 《沉积与特提斯地质》2000,20(2):74-82
脉状黝铜矿型铜矿床是产于兰坪-思茅盆地中的一种新的铜矿床类型。碳酸盐及CO2包裹体的δ13C值大多在-4‰~-7‰之间变化,显示碳来自地幔。矿石中铅同位素组成与盆地中喜马拉雅期碱性岩长石中铅的同位素组成一致,方解石和铁白云石的87Sr/86Sr比值接近或稍高于碱性岩的87Sr/86Sr的比值,显示矿石锶、铅与碱性岩锶、铅是同源的,均来自于上地幔。硫化物中硫的δ34S值大多集中在0~-4‰之间,显示其硫主要是深部来源并有少量的地壳硫参与。包裹体水的δ18O和δD值显示成矿流体的水为大气降水、岩浆水和变质水的混合物。结合其它质、地球化学特征,笔者认为这类矿床的成因类型为壳-幔混合热液成因型。 相似文献
18.
In‐situ analysis of trace elements and Sr–Pb isotopes of K‐feldspars from Tongshankou Cu–Mo deposit,SE Hubei Province,China: Insights into early potassic alteration of the porphyry mineralization system
下载免费PDF全文
![点击此处可从《地学学报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
In the Tongshankou porphyry deposit (SE Hubei Province, South China), three types of K‐feldspars are recognized: (I) the phenocryst type in the porphyry that crystalized during the magmatic stage, (II) the megacryst type and (III) the vein type in the altered porphyry and orebody that was produced by hydrothermal fluids. A detailed in‐situ analysis of trace elements and Sr–Pb isotopes was carried out on K‐feldspars in an attempt to unravel their formation processes and to trace the element sources during potassic alteration. The Type III K‐feldspars show lower Sr contents and Sr‐isotope ratios but higher Pb contents and Pb‐isotope ratios than the Type I and II K‐feldspars, possibly reflecting a contribution from the country carbonate rocks with less radiogenic Sr but more radiogenic Pb sources, and indicate that the ore‐forming fluids and materials may have been partially derived from external sources such as the host sedimentary rocks during the early potassic alteration stage. 相似文献
19.
云南华宁-峨山地区震旦系沉积岩铜矿床成因 总被引:1,自引:0,他引:1
云南震旦系沉积岩铜矿是产于红色碎屑岩系中的沉积叠加热液改造型铜矿床,矿床产在上震旦统陡山沱组灰白色砂岩,白云岩,泥灰质页岩中,具有明显层控特征。地球化学分析表明,震旦系碎屑岩中铜富集系数明显高于正常壳源沉积岩,因此加里东期后生改造矿化物质直接来自下部红色沉积岩层的淋滤迁移,最终在氧化还原过渡带与同生富集矿层叠加。 相似文献
20.
Guangming Li Kezhang Qin Kuishou Ding Tiebing Liu Jinxiang Li Shaohuai Wang Shanyuan Jiang Xingchun Zhang 《Resource Geology》2006,56(3):315-336
Abstract. Medium‐ and large‐scaled skarn Cu‐Au±Mo deposits, e.g. Kelu, Liebu, Chongmuda and Chenba among others, are distributed in Shannan area of the Gangdese Cu‐Au metallogenic belt. Intrusions‐related skarn copper mineralization belongs to high K and calc‐alkaline rock series, located in late collision volcano‐magmatic arc and formed between 20 to 30 Ma. Copper mineralization occurs at exocontact zone of the lower Cretaceous Bima Group carbonate and other calcareous‐bearing sedimentary rocks with intrusions. At present, three main mineralization types are identified, including skarn type, hydrothermal vein type and porphyry type. Mineralizing associations are Cu‐Mo, Cu‐Au and Cu. In ore districts, those mineralization types form an entire porphyry‐skarn Cu‐Au±Mo ore‐forming system. Alterations of the exocontact are mainly skarnization and hornfelsization, while the alterations of the endocontact are mainly sericitization, silicification, and chloritization of intrusion. In the study area, the endoskarn is not well developed. Copper mineralization occurs mainly in the exocontact in the form of stratoid, lenticular and pockety ore body. Veined mineralization can be seen in marblized and hornfelsed siltstone, being away from the contact zone. In the endocontact, the mineralization is mainly veinlet‐like and disseminated. In Shannan area, skarnization can be divided into early skarnization stage and late hydrous silicate stage. The early skarnization stage is featured by mainly andradite and grossular skarn, containing minor diopside, hedenbergite, magnetite and some copper minerals; and the late hydrous silicate stage is of replacement of garnet skarn by chlorite, epidote, quartz and calcite together with sulfides precipitation. The latter is the main stage of copper mineralization. Bornite is the dominant ore mineral associated with minor chalcopyrite and pyrite; and gold as well as silver are distributed in bornite and wittichenite. Results of microthermometry study of fluid inclusions in quartz of late hydrous silicate stage from different deposits show intermediate temperature and low to intermediate‐salinity features for all samples. The dominant inclusion type is composed of two phases, being about 4 to 15 % vapor and 85 to 96 % liquid at room temperature. Homogenization temperatures range from 232 to 335d?C. Salinities have been recorded between 4.2 and 15.5 wt% NaCl equivalent. Boiling fluid inclusions are not identified and it indicates that metal deposition mainly resulted from water‐rock reactions. The results of sulfur isotope analysis indicate that the sulfur isotope values (δ34S 1.29–1.68 %o) of the samples collected from skarns are similar with that from the endocontact (δ34S 1–1.75 %o). Both of them have very close sulfur isotope values (near δ34S 0 %o), which indicate the sulfur of both the skarn type and the porphyry type mineralization was from deep sources. Ages determined on biotite from ore‐bearing intermediate porphyries by Ar‐Ar methods range from 23.77±0.29 to 29.88±0.56 Ma, showing that skarn copper mineralization in the study area evidently is older than the porphyry Cu(‐Mo) mineralization in Gangdese, and likely representing another metallogenic event. The Cu‐Au skarn deposits in the Kelu‐Liebu‐Chongmuda belt are interpreted as the shallow level, skarn‐related deposits in a porphyry‐skarn mineralization. Appearance of porphyry copper mineralization in some skarn deposits implies that skarn copper mineralization of the study area resemble to those in northern sub‐metallogenic belt, having uniform porphyry‐skarn ore‐forming system. Therefore, it is presumed there should be potential to find deep level porphyry‐type Cu‐Au mineralization targets. 相似文献