网壳结构的粘弹阻尼器减振分析

本文将粘弹阻尼器引入网壳结构，针对网壳结构粘弹阻尼器减振系统，编制了有限元分析程序，利用该程序对单层球面网壳和单层柱面网壳进行了大量的减振分析。计算结果表明，粘弹阻尼器减振系统对大跨网壳结构的减振效果是十分明显的，是一种适合大跨网壳结构的减振系统。     

黏滞阻尼器在单层网壳结构中的优化布置

目前采用黏滞阻尼器对单层网壳结构进行减振控制时,阻尼器最优布置位置通过试算确定。针对此问题,推导了地震作用下黏滞阻尼器耗能公式,提出了以能量比例系数为评价指标的阻尼器优化布置准则。以单层球面网壳和单层柱面网壳为例,对比分析了地震作用下分别采用优化布置准则与现有布置方式布置阻尼器时结构最大节点位移减振系数,验证了所提出优化布置准则的正确性及在单层球面网壳和单层柱面网壳中的适用性。     

网壳结构的粘滞阻尼减振分析与试验研究

本文将粘滞阻尼器引入网壳结构,针对网壳结构粘滞阻尼器减振系统,编制了有限元分析程序,并对网壳结构进行了大量的振动控制分析和计算。作者设计制做了适合网壳结构的粘滞阻尼器,进行了性能试验;在此基础上设计制作了一个球型网壳结构模型,并进行了粘滞阻尼器减振的地震模拟振动台试验。     

地震作用下单层柱面网壳的动力稳定性能分析

以单层柱面网壳结构为研究对象,利用El-centro地震波对该类结构进行了时程地震反应分析,考察了结构的地震响应和抗震性能,研究了其在地震作用下的动力失稳特点。选取了几种几何尺寸不同的单层柱面网壳,分析了矢跨比和长跨比对单层柱面网壳动力稳定性能的影响。     

单层网壳结构的阻尼减振控制分析

对凯威特型单层球面网壳结构进行了削弱杆件刚度、附加阻尼器杆件的减振控制研究.削弱部分原有杆件的刚度后,附加阻尼减振杆件.根据阻尼杆件的力学特性,在ANSYS软件中建立附加阻尼杆件的数值计算模型,根据阻尼杆件的不同位置进行结构建模及动力分析,主要考察阻尼杆件的布置位置对网壳结构减振效果的影响,以附加斜杆和附加环杆两种方式为例进行了网壳减振结构地震作用分析.研究结果表明:阻尼杆件的布置位置对网壳结构的减振控制效果有非常重要的影响,通过合理削弱原有杆件刚度并设置附加阻尼杆件,可以使网壳结构的位移、加速度和杆件内力等动力反应有较大的降低.     

斜拉桥纵向设置粘滞阻尼器参数分析

采用Maxwell阻尼模型模拟了粘滞阻尼器的滞回耗能特性。通过对设置粘滞阻尼器斜拉桥纵向非线性地震反应的分析，讨论了粘滞阻尼器各参数对结构地震响应的影响，并通过计算证实了粘滞阻尼器具有良好的消能减振效果。     

节点刚度对单层柱面网壳地震响应及内力的影响分析

论文首先采用壳单元Shell163建立了单层柱面网壳模型,同时利用壳单元模拟了焊接空心球节点,并通过计算验证了模拟方法的合理性。然后,通过调节空心球节点的厚度,考察了节点刚度变化对单层柱面网壳地震响应的影响,分析结果表明,在强震作用下节点刚度变化对网壳节点响应与杆件内力的影响均较大,建议在进行此类结构的动力分析时考虑节点刚度的影响。     

非线性粘滞阻尼器消能结构设计方法探讨

在建立非线形粘滞阻尼器消能结构性能曲线的基础上，建议了依据减震性能目标确定阻尼器参数的概略设计方法。提出了多自由度非线性粘滞阻尼器消能结构的等效阻尼比计算公式。在此基础上建议了适用于多自由度非线性粘滞阻尼器消能结构地震反应预测的模态叠加法，方法与时程分析结果对比吻合良好。为使各层阻尼器参数更好地满足减震性能要求，提出了将概略设计得到的层阻尼器参数依据减振性能目标进行调整的方法。     

基于ANSYS软件benchmark模型耗能减振控制分析

本文系统介绍了当前国际结构振动控制的公共平台———Benchm ark模型,首次给出使用通用有限元软件ANSYS对第3阶段20层非线性钢框架抗震结构的有限元建模,结果表明,模态、无控地震反应分析结果和ASCE给出的MATLAB结果相同。利用粘滞阻尼器对此模型的耗能减振数值仿真分析的结果表明:粘滞阻尼器是一种性能很好的阻尼器,使用本文给出ANSYS的Benchm ark有限元模型来进行耗能减振控制分析是方便的、可行的。     

单层柱面网壳弹塑性地震反应特征

本文对网壳结构的弹塑性抗震性能进行了探讨。根据结构弹性有限元理论，结合网壳结构受力特点，推导出网壳结构单元的弹塑性矩阵表达式。然后对单层柱面网壳结构的弹塑性地震反应进行了具体分析，给出了节点位移和杆件应力变化规律，并讨论了矢跨比变化对网壳弹塑性性能的影响，从而揭示出这类网壳的弹塑性地震反应特点。     

A Monte Carlo study of rainfall forecasting with a stochastic model

A procedure for short-term rainfall forecasting in real-time is developed and a study of the role of sampling on forecast ability is conducted. Ground level rainfall fields are forecasted using a stochastic space-time rainfall model in state-space form. Updating of the rainfall field in real-time is accomplished using a distributed parameter Kalman filter to optimally combine measurement information and forecast model estimates. The influence of sampling density on forecast accuracy is evaluated using a series of a simulated rainfall events generated with the same stochastic rainfall model. Sampling was conducted at five different network spatial densities. The results quantify the influence of sampling network density on real-time rainfall field forecasting. Statistical analyses of the rainfall field residuals illustrate improvement in one hour lead time forecasts at higher measurement densities.     

Information for authors

正SCIENCE CHINA Earth Sciences,an academic journal cosponsored by the Chinese Academy of Sciences and the National Natural Science Foundation of China,and published by Science China Press and Springer,is committed to publishing high-quality,original results in both basic and applied research.     

INTERNATIONAL RESEARCH AND TRAINING CENTER ON EROSION AND SEDIMENTATION(IRTCES)

正Director:Shangfu Kuang,China Vice-directors:Chunhong Hu,China Duihu Ning,China Guangquan Liu,China The International Research and Training Center on Erosion and Sedimentation(IRTCES)was jointly set up by the Government of China and UNESCO on July 21,1984.It aims at the promotion of international exchange of knowledge and cooperation in the studies of erosion and     

Calendar of events

正~~     

Dynamic process-response model of river channel development

Feedback mechanisms, which operate upstream through drawdown and backwater effects and downstream through sediment discharge are responsible for channel evolution. By combining these mechanisms with channel processes it euables a dynamic process-response model to be developed to simulate the initial evolution of straight gravel-bed channels. When erosion commences on a land surface, sediment entrained in the headwater reach by hydraulic action is selectively transported, deposited and reworked. This produces a damped oscillation between degradation and aggradation as the channel and valley respond to spatial and temporal variations in sediment calibre and hydraulic conditions. The initial cut and fill phases are responsible for valley incision and floodplain development while secondary and subsequent activity can produce river terraces. Eventually sediment entrainment in the headwaters declines as slopes are reduced. Subsequent channel evolution is relatively insignificant because it is dependent on local weathering activity producing material that can be transported on declining slopes. Therefore landforms produced during the initial phase of development, when local weathering was non-limiting, dominate the landscape.