Clastic matrix in EH3 chondrites

Abstract— Patches of clastic matrix (15 to 730 μm in size) constitute 4.9 vol% of EH3 Yamato (Y‐) 691 and 11.7 vol% of EH3 Allan Hills (ALH) 81189. Individual patches in Y‐691 consist of 1) ?25 vol% relatively coarse opaque grain fragments and polycrystalline assemblages of kamacite, schreibersite, perryite, troilite (some grains with daubréelite exsolution lamellae), niningerite, oldhamite, and caswellsilverite; 2) ?30 vol% relatively coarse silicate grains including enstatite, albitic plagioclase, silica and diopside; and 3) an inferred fine nebular component (?45 vol%) comprised of submicrometer‐size grains. Clastic matrix patches in ALH 81189 contain relatively coarse grains of opaques (?20 vol%; kamacite, schreibersite, perryite and troilite) and silicates (?30 vol%; enstatite, silica and forsterite) as well as an inferred fine nebular component (?50 vol%). The O‐isotopic composition of clastic matrix in Y‐691 is indistinguishable from that of olivine and pyroxene grains in adjacent chondrules; both sets of objects lie on the terrestrial mass‐fractionation line on the standard three‐isotope graph. Some patches of fine‐grained matrix in Y‐691 have distinguishable bulk concentrations of Na and K, inferred to be inherited from the solar nebula. Some patches in ALH 81189 differ in their bulk concentrations of Ca, Cr, Mn, and Ni. The average compositions of matrix material in Y‐691 and ALH 81189 are similar but not identical‐matrix in ALH 81189 is much richer in Mn (0.23 ± 0.05 versus 0.07 ± 0.02 wt%) and appreciably richer in Ni (0.36 ± 0.10 versus 0.18 ± 0.05 wt%) than matrix in Y‐691. Each of the two whole‐rocks exhibits a petrofabric, probably produced by shock processes on their parent asteroid.     

New observations on high‐pressure phases in a shock melt vein in the Villalbeto de la Peña meteorite: Insights into the shock behavior of diopside

The petrology and mineralogy of shock melt veins in the L6 ordinary chondrite host of Villalbeto de la Peña, a highly shocked, L chondrite polymict breccia, have been investigated in detail using scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and electron probe microanalysis. Entrained olivine, enstatite, diopside, and plagioclase are transformed into ringwoodite, low‐Ca majorite, high‐Ca majorite, and an assemblage of jadeite‐lingunite, respectively, in several shock melt veins and pockets. We have focused on the shock behavior of diopside in a particularly large shock melt vein (10 mm long and up to 4 mm wide) in order to provide additional insights into its high‐pressure polymorphic phase transformation mechanisms. We report the first evidence of diopside undergoing shock‐induced melting, and the occurrence of natural Ca‐majorite formed by solid‐state transformation from diopside. Magnesiowüstite has also been found as veins injected into diopside in the form of nanocrystalline grains that crystallized from a melt and also occurs interstitially between majorite‐pyrope grains in the melt‐vein matrix. In addition, we have observed compositional zoning in majorite‐pyrope grains in the matrix of the shock‐melt vein, which has not been described previously in any shocked meteorite. Collectively, all these different lines of evidence are suggestive of a major shock event with high cooling rates. The minimum peak shock conditions are difficult to constrain, because of the uncertainties in applying experimentally determined high‐pressure phase equilibria to complex natural systems. However, our results suggest that conditions between 16 and 28 GPa and 2000–2200 °C were reached.     

Enstatite chemical composition and microstructures in the La Villa H4 chondrite

Abstract— La Villa is an unshocked H4 chondrite. Chemical compositions require crystallization at temperatures >1250 °C for enstatite and >1211 °C for augite. Widespread (100) polysynthetic twins and (001) contraction cracks in enstatite indicate crystallization as protoenstatite, inverted to either ortho‐ or clinoenstatite or both on cooling. High‐resolution transmission electron microscopy shows a range of ortho‐clinoenstatite intergrowths: heavily faulted clinoenstatite in radial and poikilitic chondrules, almost regular orthoenstatite in a microgranular chondrule and in the matrix. In the former, the clinoenstatite lamellae are both even or odd multiples of the 9Å periodicity, a few unit cells thick, twinned and interleaved with minor orthoenstatite. In the latter, orthoenstatite lamellae are regularly stacked for more than 2000 Å. Localized annealing effects, reversing clinoenstatite to orthoenstatite, are revealed by “U‐shaped” and “Z‐shaped” terminations. The variable microstructures suggest different cooling rates for the different chondrule types, soon after the liquidus‐to‐solidus transition (1200 to 1300 °C) but prior to accretion. In particular, clinoenstatite‐rich crystals from radial and poikilitic chondrules give cooling rates on the order of 100 and 10 °C/h. Comparisons with previous works on dynamic crystallization experiments and orthopyroxene Fe‐Mg cation ordering indicate a nonlinear cooling path from the high chondrule formation temperatures to a postaccretionary low‐temperature (340–480 °C) evolution.     

Mineralogy and crystallization history of the Ilafegh 009 EL-chondritic impact melt rock: An ATEM investigation

Abstract— The Ilafegh 009 meteorite is an impact melt rock from an EL-chondritic parent body. Its mineralogic assemblage is the result of rapid crystallization after shock-induced melting. We report here an analytical transmission electron microscopy (ATEM) study of the major minerals of this meteorite (enstatite, plagioclase, Fe-Ni metal and sulfides). Based on this study, we discuss the crystallization sequence and the further evolution of the rock in the solid state. Microstructure and microanalyses confirm that the mineralogy of Ilafegh 009 results from the crystallization of an EL-chondritic melt. The high compositional variability of plagioclases and the presence of silica-rich glass pockets indicate fast cooling. During crystallization, the large enstatite grains trapped a large number of phases (plagioclase, silica-rich glass and enstatite nuclei). Sulfides (troilite, alabandite and daubreelite) form finely polycrystalline areas and reveal a complex crystallization sequence. Although Fe-Ni metal grains formed during rapid cooling, their microstructures show that some postsolidification process occurred in Ilafegh 009. A large number of tiny Ni-P-Si-rich precipitates were detected that formed as a result of exsolution of elements that become insoluble in kamacite at low temperature. Finally, the microstructure (dislocation arrangements and phase transformations) observed in enstatite and Fe-Ni metal attests that Ilafegh 009 also experienced a moderate postsolidification shock event.     

Northwest Africa 2526: A partial melt residue of enstatite chondrite parentage

Abstract— NWA 2526 is a coarse‐grained, achondritic rock dominated by equigranular grains of polysynthetically twinned enstatite (?85 vol%) with frequent 120° triple junctions and ?10–15 vol% of kamacite + terrestrial weathering products. All other phases including troilite, daubreelite, schreibersite, and silica‐normative melt areas make up 相似文献   

Ordinary chondrite metallography: Part 2. Formation of zoned and unzoned metal particles in relatively unshocked H,L, and LL chondrites

Abstract— We studied the metallography of Fe‐Ni metal particles in 17 relatively unshocked ordinary chondrites and interpreted their microstructures using the results of P‐free, Fe‐Ni alloy cooling experiments (described in Reisener and Goldstein 2003). Two types of Fe‐Ni metal particles were observed in the chondrites: zoned taenite + kamacite particles and zoneless plessite particles, which lack systematic Ni zoning and consist of tetrataenite in a kamacite matrix. Both types of metal particles formed during metamorphism in a parent body from homogeneous, P‐poor taenite grains. The phase transformations during cooling from peak metamorphic temperatures were controlled by the presence or absence of grain boundaries in the taenite particles. Polycrystalline taenite particles transformed to zoned taenite + kamacite particles by kamacite nucleation at taenite/taenite grain boundaries during cooling. Monocrystalline taenite particles transformed to zoneless plessite particles by martensite formation and subsequent martensite decomposition to tetrataenite and kamacite during the same cooling process. The varying proportions of zoned taenite + kamacite particles and zoneless plessite particles in types 4–6 ordinary chondrites can be attributed to the conversion of polycrystalline taenite to monocrystalline taenite during metamorphism. Type 4 chondrites have no zoneless plessite particles because metamorphism was not intense enough to form monocrystalline taenite particles. Type 6 chondrites have larger and more abundant zoneless plessite particles than type 5 chondrites because intense metamorphism in type 6 chondrites generated more monocrystalline taenite particles. The distribution of zoneless plessite particles in ordinary chondrites is entirely consistent with our understanding of Fe‐Ni alloy phase transformations during cooling. The distribution cannot be explained by hot accretion‐autometamorphism, post‐metamorphic brecciation, or shock processing.     

Itqiy: A metal‐rich enstatite meteorite with achondritic texture

Abstract— Itqiy is a unique coarse‐grained, metal‐rich enstatite meteorite that was found in the Western Sahara and consists of two rocks together weighing 4.72 kg, which are both completely coated with fusion crust. We report results from our electron microprobe and instrumental neutron activation analysis techniques. Itqiy consists of subhedral, equigranular, millimeter‐sized enstatite, ?25 vol% of millimeter‐sized kamacite and a few tiny intergrowths of sulfides and kamacite. Relic chondrules are absent. Pyroxene (Fs_0.2) is chemically similar to enstatite in EL chondrites, but the metal is closer in composition to that in EH chondrites. Sulfides resemble those in E chondrites but their compositions are distinct from those in both EL and EH chondrites. Itqiy clearly formed under very reducing conditions, but it does not appear to have formed from EH or EL chondrites. Two thermal events can be distinguished. Silicate compositions including rare earth element abundances indicate loss of partial melt and slow cooling. Heterogeneous sulfides indicate a subsequent reheating and quenching event, which may have been due to shock as many enstatite grains show shock stage S3 features.     

Forsterite‐rich accretionary rims around calcium‐aluminum‐rich inclusions from the reduced CV3 chondrite Efremovka

Abstract— It was suggested that multilayered accretionary rims composed of ferrous olivine, andradite, wollastonite, salite‐hedenbergitic pyroxenes, nepheline, and Ni‐rich sulfides around Allende calcium‐aluminum‐rich inclusions (CAIs) are aggregates of gas‐solid condensates which reflect significant fluctuations in physico‐chemical conditions in the slowly cooling solar nebula and grain/gas separation processes. In order to test this model, we studied the mineralogy of accretionary rims around one type A CAI (E104) and one type B CAI (E48) from the reduced CV3 chondrite Efremovka, which is less altered than Allende. In contrast to the Allende accretionary rims, those in Efremovka consist of coarse‐grained (20–40 μm), anhedral forsterite (Fa_1–8), Fe, Ni‐metal nodules, amoeboid olivine aggregates (AOAs) and fine‐grained CAIs composed of Al‐diopside, anorthite, and spinel, ± forsterite. Although the fine‐grained CAIs, AOAs and host CAIs are virtually unaltered, a hibonite‐spinel‐perovskite CAI in the E48 accretionary rim experienced extensive alteration, which resulted in the formation of Fe‐rich, Zn‐bearing spinel, and a Ca, Al, Si‐hydrous mineral. Forsterites in the accretionary rims typically show an aggregational nature and consist of small olivine grains with numerous pores and tiny inclusions of Al‐rich minerals. No evidence for the replacement of forsterite by enstatite was found; no chondrule fragments were identified in the accretionary rims. We infer that accretionary rims in Efremovka are more primitive than those in Allende and formed by aggregation of high‐temperature condensates around host CAIs in the CAI‐forming regions. The rimmed CAIs were removed from these regions prior to condensation of enstatite and alkalies. The absence of andradite, wollastonite, and hedenbergite from the Efremovka rims may indicate that these rims sampled different nebular regions than the Allende rims. Alternatively, the Ca, Fe‐rich silicates rimming Allende CAIs may have resulted from late‐stage metasomatic alteration, under oxidizing conditions, of original Efremovka‐like accretionary rims. The observed differences in O‐isotope composition between forsterite and Ca, Fe‐rich minerals in the Allende accretionary rims (Hiyagon, 1998) suggest that the oxidizing fluid had an ¹⁶O‐poor oxygen isotopic composition.     

Microstructures of metal grains in ordinary chondrites: Implications for their thermal histories

Abstract— This paper reports one of the first attempts to investigate by analytical transmission electron microscopy (ATEM) the microstructures and compositions of Fe‐Ni metal grains in ordinary chondrites. Three ordinary chondrites, Saint Séverin (LL6), Agen (H5), and Tsarev (L6) were selected because they display contrasting microstructures, which reflects different thermal histories. In Saint Séverin, the microstructure of the Ni‐rich metal grains is due to slow cooling. It consists of a two‐phase assemblage with a honeycomb structure resulting from spinodal decomposition similar to the cloudy zone of iron meteorites. Microanalyses show that the Ni‐rich phase is tetrataenite (Ni = 47 wt%) and the Ni‐poor phase, with a composition of ～25% Ni, is either martensite or taenite, these two occurring adjacent to each other. The observation that the Ni‐poor phase is partly fcc resolves the disagreement between previous transmission electron microscopy (TEM) and Mössbauer studies on iron meteorites and ordinary chondrite metal. The Ni content of the honeycomb phase is much higher than in mesosiderites, confirming that mesosiderites cooled much more slowly. The high‐Ni tetrataenite rim in contact with the cloudy zone displays high‐Ni compositional variability on a very fine scale, which suggests that the corresponding area was destabilized and partially decomposed at low temperature. Both Agen and Tsarev display evidence of reheating and subsequent fast cooling obviously related to shock events. Their metallic particles mostly consist of martensite, the microstructure of which depends on local Ni content. Microstructures are controlled by both the temperature at which martensite forms and that at which it possibly decomposes. In high‐Ni zones (>15 wt%), martensitic transformation started at low temperature (<300 °C). Because no further recovery occurred, these zones contain a high density of lattice defects. In low‐Ni zones (<15 wt%), martensite grains formed at higher temperature and their lattice defects recovered. These martensite grains present a lath texture with numerous tiny precipitates of Ni‐rich taenite (Ni = 50 wt%) at lath boundaries. Nickel composition profiles across precipitate‐matrix interfaces show that the growth of these precipitates was controlled by preferential diffusion of Ni along lattice defects. The cooling rates deduced from Ni concentration profiles and precipitate sizes are within the range 1–10 °C/year for Tsarev and 10–100 °C/year for Agen.     

Microstructure and thermal history of metal particles in CH chondrites

Abstract We have studied metal microstructures in four CH chondrites, Patuxent Range (PAT) 91546, Allan Hills (ALH) 85085, Acfer 214, and Northwest Africa (NWA) 739, to examine details of the thermal histories of individual particles. Four types of metal particles are common in all of these chondrites. Zoned and unzoned particles probably formed as condensates from a gas of chondritic composition in a monotonic cooling regime, as has been shown previously. We have demonstrated that these particles were cooled rapidly to temperatures below 500 K after they formed, and that condensation effectively closed around 700 K. Zoned and unzoned particles with exsolution precipitates, predominantly high‐Ni taenite, have considerably more complex thermal histories. Precipitates grew in reheating episodes, but the details of the heating events vary among individual grains. Reheating temperatures are typically in the range 800–1000 K. Reheating could have been the result of impact events on the CH parent body. Some particles with precipitates may have been incorporated into chondrules, with further brief heating episodes taking place during chondrule formation. In addition to the four dominant types of metal particles, rare Ni‐rich metal particles and Si‐rich metal particles indicate that the metal assemblage in CH chondrites was a mixture of material that formed at different redox conditions. Metal in CH chondrites consists of a mechanical mixture of particles that underwent a variety of thermal histories prior to being assembled into the existing brecciated meteorites.     

Impact melting in the Cumberland Falls and Mayo Belwa aubrites

Abstract– Six chondritic clasts in the Cumberland Falls polymict breccia were examined: four texturally resemble ordinary chondrites (OCs) and two are impact melt breccias containing shocked OC clasts adjacent to a melt matrix. The six chondritic clasts are probably remnants of a single OC projectile that was heterogeneously shocked when it collided with the Cumberland Falls host. Mayo Belwa is the first known aubrite impact melt breccia. It contains coarse enstatite grains exhibiting mosaic extinction; the enstatite grains are surrounded by a melt matrix composed of 3–16 μm‐size euhedral and subhedral enstatite grains embedded in sodic plagioclase. Numerous vugs, ranging from a few micrometers to a few millimeters in size, constitute ～5 vol% of the meteorite. They occur nearly exclusively within the Mayo Belwa matrix; literature data show that some vugs are lined with bundles of acicular grains of the amphibole fluor‐richterite. This phase has been reported previously in only two other enstatite meteorites (Abee and St. Sauveur), both of which are EH‐chondrite impact melt breccias. It seems likely that in Mayo Belwa, volatiles were vaporized during an impact event and formed bubbles in the melt. As the melt solidified, the bubbles became cavities; plagioclase and fluor‐richterite crystallized at the margins of these cavities via reaction of the melt with the vapor.     

Brownish inclusions and dark streaks in Libyan Desert Glass: Evidence for high‐temperature melting of the target rock

Abstract– Dark streaks and different types of inclusions in Libyan Desert Glass (LDG) collected from the LDG strewn field in Egypt were investigated. Rare transparent spherules enclosed in the glassy matrix are characterized by concentric cracks, irregular internal cracks, intense twinning, and considerable amounts of Ti and Al. Raman spectra show that the spherules are α‐cristobalite. Their occurrence together with lechatelierite indicates quick heating of the source rock to at least 1550 °C, followed by rapid quenching leading to crystallization of β‐cristobalite, which upon cooling inverted into α‐cristobalite. Brownish inclusions are irregularly shaped, elongated objects with smooth contacts to the surrounding glass. They contain small roundish to elliptical droplets, and a few larger angular grains, which compositionally and according to their Raman spectra most closely resemble low‐Ca, Al‐rich orthopyroxene. Composition and texture of the orthopyroxene suggest that the brownish inclusions formed by incomplete melting of an Al‐rich orthopyroxene bearing precursor, e.g., mafic phases present in desert surface sands or also of orthopyroxene‐bearing granulite dykes in the LDG target. Experimental data on Ca‐poor enstatite also support that the inclusions were heated to about 1550 °C. Analyses of dark streaks in LDG reveal high abundances of Al, Ti, Mn, Cr, Fe, and Ni and a pronounced correlation between the abundances of Cr, Mn, Fe, and Ni. As the Fe/Ni, Mn/Ni, and Cr/Ni ratios are all clearly nonchondritic, the source of this material is most likely terrestrial and the dark streaks studied here represent a different type of schlieren compared to those which contain a meteoritic component. These findings suggest LDG formation during a short high‐temperature event. Melting of Al‐rich orthopyroxene bearing target material seems to suggest an asteroid impact rather than a near‐surface airburst.     

The smallest comet 81P/Wild 2 dust dances around the CI composition

The bulbous Stardust track #80 (C2092,3,80,0,0) is a huge cavity. Allocations C2092,2,80,46,1 nearest the entry hole and C2092,2,80,47,6 about 0.8 mm beneath the entry hole provide evidence of highly chaotic conditions during capture. They are dominated by nonvesicular low‐Mg silica glass instead of highly vesicular glass found deeper into this track which is consistent with the escape of magnesiosilica vapors generated from the smallest comet grains. The survival of delicate (Mg,Al,Ca)‐bearing silica glass structures is unique to the entry hole. Both allocations show a dearth of surviving comet dust except for a small enstatite, a low‐Ca hypersthene grain, and a Ti‐oxide fragment. Finding scattered TiO₂ fragments in the silica glass could support, but not prove, TiO₂ grain fragmentation during hypervelocity capture. The here reported dearth in mineral species is in marked contrast to the wealth of surviving silicate and oxide minerals deeper into the bulb. Both allocations show Fe‐Ni‐S nanograins dispersed throughout the low‐Mg silica glass matrix. It is noted that neither comet Halley nor Wild 2 had a CI bulk composition for the smallest grains. Using the analogs of interplanetary dust particles (IDPs) and cluster IDPs it is argued that a CI chondritic composition requires the mixing of nonchondritic components in the appropriate proportions. So far, the fine‐grained Wild 2 dust is biased toward nonchondritic ferromagnesiosilica materials and lacking contributions of nonchondritic components with Mg‐Fe‐Ni‐S[Si‐O] compositions. To be specific, “Where are the GEMS”? The GEMS look‐alike found in this study suggests that evidence of GEMS in comet Wild 2 may still be found in the Stardust glass.     

Explicating the behavior of Mn‐bearing phases during shock melting and crystallization of the Abee EH‐chondrite impact‐melt breccia

Abstract— –Literature data show that, among EH chondrites, the Abee impact‐melt breccia exhibits unusual mineralogical characteristics. These include very low MnO in enstatite (<0.04 wt%), higher Mn in troilite (0.24 wt%) and oldhamite (0.36 wt%) than in EH4 Indarch and EH3 Kota‐Kota (which are not impact‐melt breccias), low Mn in keilite (3.6–4.3 wt%), high modal abundances of keilite (11.2 wt%) and silica (～7 wt%, but ranging up to 16 wt% in some regions), low modal abundances of total silicates (58.8 wt%) and troilite (5.8 wt%), and the presence of acicular grains of the amphibole, fluor‐richterite. These features result from Abee's complex history of shock melting and crystallization. Impact heating was responsible for the loss of MnO from enstatite and the concomitant sulfidation of Mn. Troilite and oldhamite grains that crystallized from the impact melt acquired relatively high Mn contents. Abundant keilite and silica also crystallized from the melt; these phases (along with metallic Fe) were produced at the expense of enstatite, niningerite and troilite. Melting of the latter two phases produced a S‐rich liquid with higher Fe/Mg and Fe/Mn ratios than in the original niningerite, allowing the crystallization of keilite. Prior to impact melting, F was distributed throughout Abee, perhaps in part adsorbed onto grain surfaces; after impact melting, most of the F that was not volatilized was incorporated into crystallizing grains of fluor‐richterite. Other EH‐chondrite impact‐melt breccias and impact‐melt rocks exhibit some of these mineralogical features and must have experienced broadly similar thermal histories.     

Enstatite aggregates with niningerite,heideite, and oldhamite from the Kaidun carbonaceous chondrite: Relatives of aubrites and EH chondrites?

Abstract— We studied 2 enstatite aggregates (En >99), with sizes of 0.5 and 1.5 mm, embedded in the carbonaceous matrix of Kaidun. They contain sulfide inclusions up to 650 μm in length, which consist mainly of niningerite but contain numerous grains of heideite as well as oldhamite and some secondary phases (complex Fe, Ti, S hydroxides and Ca carbonate). Both niningerite and heideite are enriched in all trace elements relative to the co‐existing enstatite except for Be and Sc. The niningerite has the highest Ca content (about 5 wt%) of all niningerites analyzed so far in any meteorite and is the phase richest in trace elements. The REE pattern is fractionated, with the CI‐normalized abundance of Lu being higher by 2 orders of magnitude than that of La, and has a strong negative Eu anomaly. Heideite is, on average, poorer in trace elements except for Zr, La, and Li. Its REE pattern is flat at about 0.5 × CI, and it also has a strong negative Eu anomaly. The enstatite is very poor in trace elements. Its Ce content is about 0.01 that of niningerite, but Li, Be, Ti, and Sc have between 0.1 and 1 × CI abundances. The preferential partitioning of typical lithophile elements into sulfides indicates highly O‐deficient and S‐dominated formation conditions for the aggregates. The minimum temperature of niningerite formation is estimated to be ?850–900 °C. The texture and the chemical characteristics of the phases in the aggregates suggest formation by aggregation and subsequent sintering before incorporation into the Kaidun breccia. The trace element data obtained for heideite, the first on record, show that this mineral, in addition to oldhamite and niningerite, is also a significant carrier of trace elements in enstatite meteorites.     

Condensation and aggregation of solar corundum and corundum‐hibonite grains

Abstract— Forty‐three corundum grains (1–11 μm in size) and 5 corundum‐hibonite grains with corundum overgrown by hibonite (4–7 μm in size), were found in the matrix of the mineralogically pristine, ungrouped carbonaceous chondrite Acfer 094 by using cathodoluminescence imaging. Some of the corundum and corundum‐hibonite grains occur as aggregates of 2 to 6 grains having similar sizes. The oxygen isotopic compositions of some of the corundum‐bearing grains suggest their solar nebula origin. ²⁶Al‐²⁶Mg systematics of one corundum grain showed the canonical initial ²⁶Al/²⁷Al ratio, also suggesting a solar nebula origin. Quantitative evaluation of condensation and accretion processes made based on the homogeneous nucleation of corundum, diffusion‐controlled hibonite formation, collisions of grains in the nebula, and critical velocity for sticking, indicates that, in contrast to the hibonite‐bearing aggregates of corundum grains, the hibonite‐free corundum aggregates could not have formed in the slowly cooling nebular region with solar composition. We suggest instead that such aggregates formed near the protosun, either in a region that stayed above the condensation temperature of hibonite for a long time or in a chemically fractionated, Ca‐depleted region, and were subsequently physically removed from this hot region, e.g., by disk wind.     

Formation of feldspathic and metallic melts by shock in enstatite chondrite Reckling Peak A80259

Abstract— The enstatite chondrite reckling peak (rkp) a80259 contains feldspathic glass, kamacite, troilite, and unusual sets of parallel fine‐grained enstatite prisms that formed by rapid cooling of shock melts. Metallic Fe,Ni and troilite occur as spherical inclusions in feldspathic glass, reflecting the immiscible Fe‐Ni‐S and feldspathic melts generated during the impact. The Fe‐Ni‐S and feldspathic liquids were injected into fractures in coarse‐grained enstatite and cooled rapidly, resulting in thin (≤ 10 μm) semicontinuous to discontinuous veins and inclusion trails in host enstatite. Whole‐rock melt veins characteristic of heavily shocked ordinary chondrites are conspicuously absent. Raman spectroscopy shows that the feldspathic material is a glass. Elevated MgO and SiO₂ contents of the glass indicate that some enstatite and silica were incorporated in the feldspathic melt. Metallic Fe,Ni globules are enclosed by sulfide and exhibit Nienrichment along their margins characteristic of rapid crystallization from a Fe‐Ni‐S liquid. Metal enclosed by sulfide is higher in Si and P than metal in feldspathic glass and enstatite, possibly indicating lower O fugacities in metal/sulfide than in silicate domains. Fine‐grained, elongate enstatite prisms in troilite or feldspathic glass crystallized from local pyroxene melts that formed along precursor grain boundaries, but most of the enstatite in the target rock remained solid during the impact and occurs as deformed, coarsegrained crystals with lower CaO, Al₂O₃, and FeO than the fine‐grained enstatite. Reckling Peak A80259 represents an intermediate stage of shock melting between unmelted E chondrites and whole‐rock shock melts and melt breccias documented by previous workers. The shock petrogenesis of RKPA80259 reflects the extensive impact processing of the enstatite chondrite parent bodies relative to those of other chondrite types.     

Presolar grains in primitive ungrouped carbonaceous chondrite Northwest Africa 5958

We report a correlated NanoSIMS‐transmission electron microscopy study of the ungrouped carbonaceous chondrite Northwest Africa (NWA) 5958. We identified 10 presolar SiC grains, 2 likely presolar graphite grains, and 20 presolar silicate and/or oxide grains in NWA 5958. We suggest a slight modification of the commonly used classification system for presolar oxides and silicates that better reflects the grains’ likely stellar origins. The matrix‐normalized presolar SiC abundance in NWA 5958 is ppm (2σ) similar to that seen in many classes of unmetamorphosed chondrites. In contrast, the matrix‐normalized abundance of presolar O‐rich phases (silicates and oxides) is ppm (2σ), much lower than seen in interplanetary dust particles and the least‐altered CR, CO, and ungrouped C chondrites, but close to that reported for CM chondrites. NanoSIMS mapping also revealed an unusual ¹³C‐enriched (δ¹³C≈100–200‰) carbonaceous rim surrounding a 1.4 μm diameter phyllosilicate grain. Transmission electron microscopy (TEM) analysis of two presolar grains with a likely origin in asymptotic giant branch stars identified one as enstatite and one as Al‐Mg spinel with minor Cr. The enstatite grain amorphized rapidly under the electron beam, suggesting partial hydration. TEM data of NWA 5958 matrix confirm that it has experienced aqueous alteration and support the suggestion of Jacquet et al. (34) that this meteorite has affinities to CM2 chondrites.     

Evidence for shock‐induced anhydrite recrystallization and decomposition at the UNAM‐7 drill core from the Chicxulub impact structure

Drill core UNAM‐7, obtained 126 km from the center of the Chicxulub impact structure, outside the crater rim, contains a sequence of 126.2 m suevitic, silicate melt‐rich breccia on top of a silicate melt‐poor breccia with anhydrite megablocks. Total reflection X‐ray fluorescence analysis of altered silicate melt particles of the suevitic breccia shows high concentrations of Br, Sr, Cl, and Cu, which may indicate hydrothermal reaction with sea water. Scanning electron microscopy and energy‐dispersive spectrometry reveal recrystallization of silicate components during annealing by superheated impact melt. At anhydrite clasts, recrystallization is represented by a sequence of comparatively large columnar, euhedral to subhedral anhydrite grains and smaller, polygonal to interlobate grains that progressively annealed deformation features. The presence of voids in anhydrite grains indicates SO_x gas release during anhydrite decomposition. The silicate melt‐poor breccia contains carbonate and sulfate particles cemented in a microcrystalline matrix. The matrix is dominated by anhydrite, dolomite, and calcite, with minor celestine and feldspars. Calcite‐dominated inclusions in silicate melt with flow textures between recrystallized anhydrite and silicate melt suggest a former liquid state of these components. Vesicular and spherulitic calcite particles may indicate quenching of carbonate melts in the atmosphere at high cooling rates, and partial decomposition during decompression at postshock conditions. Dolomite particles with a recrystallization sequence of interlobate, polygonal, subhedral to euhedral microstructures may have been formed at a low cooling rate. We conclude that UNAM‐7 provides evidence for solid‐state recrystallization or melting and dissociation of sulfates during the Chicxulub impact event. The lack of anhydrite in the K‐Pg ejecta deposits and rare presence of anhydrite in crater suevites may indicate that sulfates were completely dissociated at high temperature (T > 1465 °C)—whereas ejecta deposited near the outer crater rim experienced postshock conditions that were less effective at dissociation.     

The formation of Mg,Fe‐silicates by reactions between amorphous magnesiosilica smoke particles and metallic iron nanograins with implications for comet silicate origins

This thermal annealing experiment at 1000 K for up to 167 h used a physical mixture of vapor phase‐condensed magnesiosilica grains and metallic iron nanograins to test the hypothesis that a mixture of magnesiosilica grains and an Fe‐source would lead to the formation of ferromagnesiosilica grains. This exploratory study found that coagulation and thermal annealing of amorphous magnesiosilica and metallic grains yielded ferromagnesiosilica grains with the Fe/(Fe + Mg) ratios in interplanetary dust particles. Furthermore, decomposition of brucite present in the condensed magnesiosilica grains was the source for water and the cause of different iron oxidation states, and the formation of amorphous Fe³⁺‐ferrosilica, amorphous Fe³⁺‐Mg, Fe‐silicates, and magnesioferrite during thermal annealing. Fayalite and ferrosilite that formed from silica/FeO melts reacted with forsterite and enstatite to form Mg, Fe‐silicates. The presence of iron in different oxidation states in extraterrestrial materials almost certainly requires active asteroid‐like parent bodies. If so, the possible presence of trivalent Fe compounds in comet P/Halley suggests that Halley‐type comets are a mixture of preserved presolar and processed solar nebula dust. The results from this thermal annealing experiment further suggest that the Fe‐silicates detected in the impact‐induced ejecta from comet 9P/Temple 1 might be of secondary origin and related to the impact experiment or to processing in a regolith.