Los Azufres silicic center (Mexico): inference of caldera structural elements from gravity, aeromagnetic, and geoelectric data

Los Azufres geothermal field is located within a silicic volcanic complex in central Mexico. The complex is one of the major silicic centers in the Trans-Mexican Volcanic Belt (TMVB). Pradal and Robin (1985) first suggested the existence of the Los Azufres caldera, and Ferrari et al. (1991) recognized the existence of a collapse structure. According to Pradal and Robin this is a caldera of resurgent type. This geophysical study aims to contribute to the knowledge of the structure of the Los Azufres area. Gravity, aeromagnetic, magnetotelluric (MT) and d.c. vertical electric-resistivity soundings were analyzed. Results show that Los Azufres is a very structurally complex setting with relatively thin crust caused by the extensional tectonics characterizing this central sector of the TMVB. Faults belonging to the E-W to NE-SW (extensional neotectonics) and NW-SE (Basin and Range province) systems are observed to affect the geologic units of Los Azufres. According to our study, the Los Azufres geothermal field is located in a structural high located in the middle of a sub-circular depression delimited to the north-northeast by the Santa Ines Range, and to the southwest by the Mil Cumbres formation. The larger depression consists of two narrow, deep depressions that correspond to La Venta and to the Valley of Juarez. They are separated by the above mentioned structural high. These sub-depressions are believed to be the sites of a maximum caldera collapse, and the structural high is interpreted to be at least in part the caldera's resurgent dome. Geoelectric structure of the caldera derived from d.c. resistivity indicates that the brines of the Los Azufres geothermal system ascend along faults, both bounding and internally disrupting the structural high/resurgent dome. A reasonable correlation is observed between gravity and aeromagnetic data.     

The interaction between regional and local tectonics during resurgent doming: the case of the island of Ischia, Italy

The volcanic island of Ischia is located on the Tyrrhenian margin of Central Italy, characterized by Plio-Quaternary NW–SE- and NE–SW-trending extensional fractures. Ischia displays a resurgent dome uplifted by at least 800 m in the last 33 ka. Remote sensing and field data have been collected to study the structural setting of the island, the deformation pattern associated with resurgence and the superimposition of the regional and the resurgence-induced stress fields. NW–SE and NE–SW extensional fracture systems predominate throughout the island and around the resurgent block, suggesting a relationship with the regional extensional structures. These systems were formed before resurgence and were partly reactivated during resurgence. The reactivation of pre-existing regional systems during resurgence confined the extent of the uplifted area. N–S- and E–W-trending systems have been found exclusively at the borders of the dome and are interpreted as being induced by resurgence. The topmost resurgent block shows an octagonal shape in map view and is tilted at an angle of 15° around a NE–SW-trending horizontal axis; the block is partly bordered by high-angle, inward-dipping regional faults. More than 90% in volume of the volcanic products coeval with resurgence on Ischia have been erupted outside the resurgent block area, suggesting that the resurgence process locally replaced volcanic activity in the last 33 ka.     

La Pacana caldera and the Atana Ignimbrite — a major ash-flow and resurgent caldera complex in the Andes of northern Chile

The recently discovered La Pacana caldera, 60 × 35 km, is the largest caldera yet described in South America. This resurgent caldera of Pliocene age developed in a continental platemargin environment in a major province of ignimbrite volcanism in the Central Andes of northern Chile at about 23° S latitude. Collapse of La Pacana caldera was initiated by the eruption of about 900 km³ of the rhyodacitic Atana Ignimbrite. The Atana Ignimbrite was erupted from a composite ring fracture system and formed at least four major ash-flow tuff units that are separated locally by thin air-fall and surge deposits; all four sheets were emplaced in rapid succession about 4.1 ± 0.4 Ma ago. Caldera collapse was followed closely by resurgent doming of the caldera floor, accompanied by early postcaldera eruptions of dacitic to rhyolitic lava domes along the ring fractures. The resurgent dome is an elongated, asymmetrical uplift, 48.5 × 12 km, which is broken by a complex system of normal faults locally forming a narrow discontinuous apical graben. Later, postcaldera eruptions produced large andesitic and dacitic stratocones along the caldera margins and dacitic domes on the resurgent dome beginning about 3.5 Ma ago and persisting into the Quaternary. Hydrothermally altered rocks occur in the eroded cores of precaldera and postcaldera stratovolcanoes and along fractures in the resurgent dome, but no ore deposits are known. A few warm springs located in salars within the caldera moat appear to be vestiges of the caldera geothermal system.     

Analysis and interpretation of gravity data from the Aluto-Langano geothermal field of Ethiopia

The Aluto-Langano geothermal field is located in the central southern portion of Ethiopia within the Ethiopian Rift Valley. The gravity of the area was surveyed in an attempt to delineate the subsurface structure and to better understand the relationship between the geothermal systems and the subsurface structure. The gravity data were analyzed using integrated gradient interpretation techniques, such as the Horizontal Gradient (HG), Source Edge Detection (SED), and Euler Deconvolution (ED) methods. These techniques detected many faults that were compared with the mapped faults in the surface geology. The results of the present study will lead to an improved understanding of the geothermal system in the study area and aid the future geothermal exploration of the area.     

Geodetic and seismic constraints on recent activity at Long Valley Caldera,California: evidence for viscoelastic rheology

Long Valley Caldera is an active volcanic region in east central California. Surface deformation on the resurgent dome within the caldera was an order of magnitude higher for the five-month period September 1997 through January 1998 compared to the previous three-year average. However, the location of the immediate (shallow) source of deformation remained essentially constant, 5–7 km beneath the dome, near the top of a region of probable magma accumulation defined by seismic data. Similarly, although the rate of seismic moment release increased dramatically, earthquake locations remained similar to earlier periods. The rate of deformation increased exponentially between April–May 1997 and late November 1997 with a time constant of ∼55–65 days, after which it decreased exponentially with about the same time constant. We develop a model consistent with these observations and also consistent with independent constraints on sub-surface rheology from thermal, geochemical and laboratory data. Deformation at sites on the resurgent dome most sensitive to the shallow deformation source are well fit by a model with a single pressure source at 6 km depth which experienced a pressure pulse that began in late 1996, peaked in November 1997, close to the time of major seismic moment release, and essentially ended in mid-1999. The pressure source in our model is surrounded by a 1 km thick “shell” of Maxwell viscoelastic material (shell viscosity 10¹⁶ Pa s) within an elastic half space, and has peak values that are much lower than corresponding purely elastic half space models. The shell viscosity is characteristic of a weak, deformable solid, e.g. quartz-bearing country rock surrounding the magma chamber at temperatures in the range 500–600°C, i.e. above the brittle–ductile transition, and/or largely crystallized rhyolite near its solidus temperature of ∼670°C, material that probably exists near the top of the zoned magma chamber at Long Valley.     

Geochemistry and isotopes of fluids from sulphur springs, Valles Caldera, New Mexico

Detailed geochemistry supported by geologic mapping has been used to investigate Sulphur Springs, an acid-sulfate hot spring system that issues from the western flank of the resurgent dome inside Valles Caldera. The most intense activity occurs at the intersection of faults offsetting caldera-fill deposits and post-caldera rhyolites. Three geothermal wells in the area have encountered pressures <1 MPa and temperatures of 200°C at depths of 600 to 1000 m. Hot spring and fumarole fluids may discharge at boiling temperatures with pH 1.0 and SO₄ 8000 mg/l. These conditions cause argillic alterations throughout a large area.Non-condensible gases consist of roughly 99% CO₂ with minor amounts of H₂S, H₂, and CH₄. Empirical gas geothermometry suggests a deep reservoir temperature of 215 to 280°C. Comparison of ¹³C and ¹⁸O between CaCO₃ from well cuttings and CO₂ from fumarole steam indicates a fractionation temperature between 200 and 300°C by decarbonation of hydrothermally altered Paleozoic limestone and vein calcite in the reservoir rocks. Tritium concentrations obtained from steam condensed in a mudpot and deep reservoir fluids (Baca #13, 278°C) are 2.1 and 1.0 T.U. respectively, suggesting the steam originates from a reservoir whose water is mostly >50 yrs old. Deuterium contents of fumarole steam, deep reservoir fluid, and local meteoric water are practically identical even though ¹⁸O contents range through 4‰, thus, precipitation on the resurgent dome of the caldera could recharge the hydrothermal system by slow percolation. From analysis of D and ¹⁸O values between fumarol steam and deep reservoir fluid, steam reaches the surface either (1) by vaporizing relatively shallow groundwater at 200°C or (2) by means of a two-stage boiling process through an intermediate level reservoir at roughly 200°C.Although many characteristics of known vapor-dominated geothermal systems are found at Sulphur Springs, fundamental differences exist in temperature and pressure of our postulated vapor-zone. We propose that the reservoir beneath Sulphur Springs is too small or too poorly confined to sustain a “true” vapor-dominated system and that the Sulphur Springs system may be a “dying” vapor-dominated system that has practically boiled itself dry.     

Comments on: The structure of the shallow crust beneath Olkaria geothermal field, Kenya, deduced from gravity studies, by J.M. Ndombi

Major geothermal systems in the Kenya Rift Valley are located over, or near to, elongated axial gravity highs. A recently published interpretative model, which explains the axial gravity high over the Olkaria geothermal field in terms of shallow dyke intrusions, is not acceptable. This conclusion is corroborated by density measurements on surface samples and cores from production bores in the Olkaria field. Elongated, high-standing mafic intrusions are the likely source of the axial gravity highs in the rift valley. These intrusions appear to be the heat source for most geothermal systems in the rift.     

Oxygen isotope evidence for past and present hydrothermal regimes of Long Valley caldera, California

Whole-rock oxygen isotope compositions of cores and cuttings from Long Valley exploration wells show that the Bishop Tuff has been an important reservoir for both fossil and active geothermal systems within the caldera. The deep Clay Pit-1 and Mammoth-1 wells on the resurgent dome penetrate mildly to strongly altered Bishop Tuff with δ¹⁸O_WR values as low as −2.6% (vs V-SMOW). The idfu 44-16 well intercepts a thinner Bishop Tuff section with δ¹⁸O_WR values of +0.4 to +2.3%. in the western caldera moat, where milder and more sporadic ¹⁸O depletions occur in Tertiary volcanic rocks of the western caldera floor (δ¹⁸O_WR = +2.2 to +6.4‰). Bishop Tuff samples from deeper parts of the 715 m rdo-8 (Shady Rest) well in the SW moat are also strongly depleted in ¹⁸O (δ¹⁸O_WR = −1.5 to +0.6‰). Four shallow thermal gradient wells (469–715 m td drilled in the western moat did not penetrate Bishop Tuff, but Early Rhyolites from two of these holes are depleted in ¹⁸O (δ¹⁸O_WR = −1.2 to +6.0‰ inplv-1 +4.6 to +5.3%. inmlgrap-1), compared to lithologic equivalents from the other two holes (δ¹⁸O_WR = +6.3 to +8.0‰ inplv-2 andmlgrap-2).Whole-rock oxygen isotope profiles for the resurgent dome wells are unlike profiles calculated assuming alkali feldspar-H₂O fractionation behavior and total O-isotopic equilibration with −14.3‰ fluids at measured temperatures. The sense of this divergence implies an earlier hydrothermal episode within the central caldera driven by one or more shallow intrusions. Geochemical similarities between an intrusive granophyre at the bottom of the Clay Pit-1 well and a nearby Moat Rhyolite dome with a K/Ar cooling age of 0.5 Ma suggest that vigorous hydrothermal activity beneath the central resurgent dome may have occurred as much as 0.5 m.y. ago. Calculated and measured O-isotope profiles are similar for deep wells that penetrate the western moat of the caldera, where steep temperature gradients and low δ¹⁸O_WR values in Early Rhyolites from plv-1 are attributed to an active hydrothermal aquifer that has descended slightly from earlier, shallower elevations. Similarly, severe ¹⁸O depletions in Bishop Tuff samples from the idfu 44-16 and rdo-8 wells reflect active convection beneath the western moat, whereas milder ¹⁸O depletions in Early Rhyolites from mlgrap-1 were apparently caused by hydrothermal alteration at lower temperatures. The O-isotope profiles imply that surface discharge within and around the resurgent dome results from shallow, eastward-directed outflow from a zone of higher enthalpy hydrothermal upflow beneath the western caldera moat. Intrusive magmatic heat source(s) are inferred to exist beneath the western moat, perhaps beneath Mammoth Mountain.     

New evidence on the hydrothermal system in Long Valley caldera, California, from wells, fluid sampling, electrical geophysics, and age determinations of hot-spring deposits

Data collected since 1985 from test drilling, fluid sampling, and geologic and geophysical investigations provide a clearer definition of the hydrothermal system in Long Valley caldera than was previously available. This information confirms the existence of high-temperature (> 200°C) reservoirs within the volcanic fill in parts of the west moat. These reservoirs contain fluids which are chemically similar to thermal fluids encountered in the central and eastern parts of the caldera. The roots of the present-day hydrothermal system (the source reservoir, principal zones of upflow, and the magmatic heat source) most likely occur within metamorphic basement rocks beneath the western part of the caldera. Geothermometer-temperature estimates for the source reservoir range from 214 to 248°C. Zones of upflow of hot water could exist beneath the plateau of moat rhyolite located west of the resurgent dome or beneath Mammoth Mountain. Lateral flow of thermal water away from such upflow zones through reservoirs in the Bishop Tuff and early rhyolite accounts for temperature reversals encountered in most existing wells. Dating of hot-spring deposits from active and inactive thermal areas confirms previous interpretations of the evolution of hydrothermal activity that suggest two periods of extensive hot-spring discharge, one peaking about 300 ka and another extending from about 40 ka to the present. The onset of hydrothermal activity around 40 ka coincides with the initiation of rhyolitic volcanism along the Mono-Inyo Craters volcanic chain that extends beneath the caldera's west moat.     

Fluid circulation in a complex volcano-tectonic setting,inferred from self-potential and soil CO2 flux surveys: The Santa María–Cerro Quemado–Zunil volcanoes and Xela caldera (Northwestern Guatemala)

The region encompassing Santa María, Cerro Quemado, and Zunil volcanoes, close to Quetzaltenango, the second largest city of Guatemala, is volcanically and tectonically complex. In addition, the huge Xela caldera, about 20 km in diameter, crosses this area and links up to the important Zunil fault zone located between the three volcanoes. Two highly active geothermal sites, named Zunil-I and Zunil-II, are also located between these three volcanic edifices at the southeastern boundary of Xela caldera. In order to determine the permeability variations and the main structural discontinuities within this complex volcano-tectonic setting, self-potential and soil CO₂ flux measurements have been coupled, with a step of 20 m, along a 16.880 km-long profile crossing the entire area. Two shallow hydrothermal systems, with maximum lateral extensions of 1.5 km in diameter, are indicated by positive self-potential/elevation gradients below Santa María and Cerro Quemado volcanoes. Such small hydrothermal systems cannot explain the intense geothermal manifestations at Zunil-I and Zunil-II. Another minor hydrothermal system is indicated by self-potential measurements on the flank of Santa María along the edge of the Xela caldera. CO₂ flux measurements display slight variations inside the caldera and decreasing values crossing outside the caldera boundary. We hypothesize the presence of a magmatic body, inside the southeastern border of Xela caldera, to explain the deeper and more intense hydrothermal system manifested by the Zunil-I and the Zunil-II geothermal fields. This magmatic system may be independent from Santa María and Cerro Quemado volcanoes. Alternatively, the hypothesized Xela magmatic system could have a common magmatic origin with the Cerro Quemado dome complex, consistent with previous findings on regional gas emissions. Sectors bordering the Cerro Quemado dome complex also have high amplitude minima-short wavelength anomalies in self-potential, interpreted as preferential rain water infiltration along faults of major permeability, probably related with the most recent stages of Cerro Quemado dome growth.     

Seismicity in the Rotorua and Kawerau geothermal systems,Taupo Volcanic Zone,New Zealand,based on improved velocity models and cross-correlation measurements

We analyze earthquakes occurring in and around the Rotorua and Kawerau geothermal systems, Taupo Volcanic Zone, New Zealand. The two data sets contain 504 and 1875 shallow (≤ 20 km deep) earthquakes, respectively, and span the 21 year period between 1984 and 2004. The arrival time data for these earthquakes are first used to calculate 1-D P- and S-wave seismic velocity models and accompanying station correction terms for both areas. In order to address the non-uniqueness of the joint hypocenter-velocity model estimation problem, we analyze suites of 1000 velocity models computed from random initial models. The final velocity models are well constrained, particularly at depths between 4 and 15 km, and consistent with the results obtained in previous seismic refraction studies of the central Taupo Volcanic Zone. Using a combination of cross-correlation-derived and catalog-based arrival times, we relocate subsets of the Rotorua and Kawerau data sets. In Rotorua, the relocated earthquakes cluster near the geothermally active parts of Rotorua City and beneath the Mount Ngongotaha rhyolite dome. Earthquake clusters and alignments reveal seismogenic structures in the mid-crust whose positions and geometries are consistent with previously published fault mechanisms and known near-surface faults. In Kawerau, the earthquakes within the geothermal field align along northeast-trending lineations, consistent with the predominant alignment of surface-mapped faults in the area.     

Renewed uplift at the Yellowstone Caldera measured by leveling surveys and satellite radar interferometry

 A first-order leveling survey across the northeast part of the Yellowstone caldera in September 1998 showed that the central caldera floor near Le Hardy Rapids rose 24±5 mm relative to the caldera rim at Lake Butte since the previous survey in September 1995. Annual surveys along the same traverse from 1985 to 1995 tracked progressive subsidence near Le Hardy Rapids at an average rate of –19±1 mm/year. Earlier, less frequent surveys measured net uplift in the same area during 1923–1976 (14±1 mm/year) and 1976–1984 (22±1 mm/year). The resumption of uplift following a decade of subsidence was first detected by satellite synthetic aperture radar interferometry, which revealed approximately 15 mm of uplift in the vicinity of Le Hardy Rapids from July 1995 to June 1997. Radar interferograms show that the center of subsidence shifted from the Sour Creek resurgent dome in the northeast part of the caldera during August 1992 to June 1993 to the Mallard Lake resurgent dome in the southwest part during June 1993 to August 1995. Uplift began at the Sour Creek dome during August 1995 to September 1996 and spread to the Mallard Lake dome by June 1997. The rapidity of these changes and the spatial pattern of surface deformation suggest that ground movements are caused at least in part by accumulation and migration of fluids in two sill-like bodies at 5–10 km depth, near the interface between Yellowstone's magmatic and deep hydrothermal systems. Received: 30 November 1998 / Accepted: 16 April 1999     

福州市隐伏断层地球化学试验探测及研究

在城市环境中进行隐伏断层地球化学探测试验是一次新的尝试。试验探测内容包括 :不同地球化学测项 (土壤气汞和土汞、土壤气氡等 )、不同类型测氡仪器 (FD - 12 5 ,FD - 30 17RaA)、不同探测场地 (稻田、菜地、林区、道路、回填土和市区街道绿化带等 )。地球化学与浅层地震勘探结果的比较表明 ,2类异常点的对应率约为 70 % ,表明地球化学方法在福州市环境下的隐伏断层探测中是一种有效的方法 ;地球化学“伪异常”出现的可能部位是小桥边、废弃建筑物地基、路边垃圾堆放地等     

Numerical modeling of geothermal groundwater flow in karst aquifer system in eastern Weibei,Shaanxi Province,China

The quantitative assessment of geothermal water resources is important to the exploitation and utilization of geothermal resources. In the geothermal water systems the density of groundwater changes with the temperature, therefore the variations in hydraulic heads and temperatures are very complicated. A three-dimensional density-dependent model coupling the groundwater flow and heat transport is established and used to simulate the geothermal water flow in the karst aquifers in eastern Weibei, Shaanxi Province, China. The multilayered karst aquifer system in the study area is cut by some major faults which control the regional groundwater flow. In order to calibrate and simulate the effect of the major faults, each fault is discretized as a belt of elements with special hydrological parameters in the numerical model. The groundwater dating data are used to be integrated with the groundwater flow pattern and calibrate the model. Simulation results show that the calculated hydraulic heads and temperature fit with the observed data well.

     

Trace-element distribution in an active hydrothermal system, Roosevelt hot springs thermal area, Utah

Chemical interaction of thermal fluids with reservoir rock in the Roosevelt Hot Springs thermal area, Utah, has resulted in the development of characteristic trace-element dispersion patterns. Multielement analyses of surface rock samples, soil samples and drill cuttings from deep exploration wells provide a three-dimensional perspective of chemical redistribution within this structurally-controlled hot-water geothermal system.Five distinctive elemental suites of chemical enrichment are recognized, each characteristic of a particular combination of physical and chemical conditions within the geothermal system. These are: (1) concentrations of As, Sb, Be, and Hg associated with siliceous material at locations of liquid discharge, fluid mixing or boiling; (2) concentrations of Mn, Ba, W, Be, Cu, Co, As, Sb and Hg in manganese and iron oxide deposits; (3) high concentrations of Hg in argillized rock near fumaroles and lower concentrations in a broad diffuse halo surrounding the thermal center; (4) concentrations of As in sulfides and Li in silicate alteration minerals immediately surrounding high-temperature fluid flow-controlling fractures; (5) deposits of CaCO₃ at depth where flashing of brine to steam has occurred due to pressure release. The geochemical enrichments are not, in general, widespread, pervasively developed zones of regular form and dimension as are typical in many ore-forming hydrothermal systems.As the geothermal system develops, changes and eventually declines through time, the chemical deposits are developed, remobilized or superimposed upon each other, thus preserving within the rocks a record of the history of the geothermal system. Recognition of trace-element distribution patterns during the exploration of a geothermal system may aid definition of the present geometry and interpretation of the history of the system.     

Numerical modeling of geothermal groundwater flow in karst aquifer system in eastern Weibei,Shaanxi Province,China

The quantitative assessment of geothermal water resources is important to the exploitation and utilization of geothermal resources. In the geothermal water systems the density of groundwater changes with the temperature, therefore the variations in hydraulic heads and temperatures are very complicated. A three-dimensional density-dependent model coupling the groundwater flow and heat transport is established and used to simulate the geothermal water flow in the karst aquifers in eastern Weibei, Shaanxi Province, China. The multilayered karst aquifer system in the study area is cut by some major faults which control the regional groundwater flow. In order to calibrate and simulate the effect of the major faults, each fault is discretized as a belt of elements with special hydrological parameters in the numerical model. The groundwater dating data are used to be integrated with the groundwater flow pattern and calibrate the model. Simulation results show that the calculated hydraulic heads and temperature fit with the observed data well.     

Numerical modeling of geothermal groundwater flow in karst aquifer system in eastern Weibei, Shaanxi Province, China

The quantitative assessment of geothermal water resources is important to the exploitation and utilization of geothermal resources. In the geothermal water systems the density of groundwater changes with the temperature, therefore the variations in hydraulic heads and temperatures are very complicated. A three-dimensional density-dependent model coupling the groundwater flow and heat transport is established and used to simulate the geothermal water flow in the karst aquifers in eastern Weibei, Shaanxi Province, China. The multilayered karst aquifer system in the study area is cut by some major faults which control the regional groundwater flow. In order to calibrate and simulate the effect of the major faults, each fault is discretized as a belt of elements with special hydrological parameters in the numerical model. The groundwater dating data are used to be integrated with the groundwater flow pattern and calibrate the model. Simulation results show that the calculated hydraulic heads and temperature fit with the observed data well.     

A resurgent cauldron in the early Paleozoic of Wales, U.K.

The paper presents a controversial interpretation of a mid-Ordovician volcano-sedimentary complex. It deals with the cyclic interdependence of intrusive, volcanic, and sedimentary processes, due to the development of a nearshore resurgent cauldron in the Caledonian fold belt of North Wales. Deformed volcanotectonic features include a resurgent dome and apical graben, surrounded by a moat and peripheral crescentic ring-fault, constituting a caldera 20 km in diameter. The resurgent Snowdon caldera developed through three cycles of ash-flow volcanism resulting from the continuous supply of magma into a shallow magma chamber emplaced beneath the floor of a marine basin. Each ash-flow cycle was preceded by the emergence, above sea level, of a geotumour that subsequently collapsed following eruption and evacuation of the magma chamber. Localized unconformities at the base of individual ash-flow cycles are compared with caldera margin and associated collapse features. Deeper-seated effects of caldera collapse are expressed as gaps in the Ordovician sequence due to normal faulting along the structural boundary of the caldera. Major ash-flow fissure vents were located at points of maximum unloading of the magma chamber by distention faults in its roof. Explosive mechanisms were triggered by rapid pressure release due to tectonic erosion.The presence of a resurgent cauldron implies that the Ordovician succession of North Wales is more complete than recorded in the literature, and that Caledonian structures were largely predetermined by Caradocian volcano-tectonics.     

Geothermal and bathymetric surveys of Brouton Bay (Uratman Volcano,Simushir I., Kuril Islands)

This paper presents results from a comprehensive analysis of geothermal and bathymetric surveys in the Brouton Bay on Simushir I. (Kuril Islands). High heat flow values through the bay bottom are typical of the present-day volcanoes at the Kuril island system. The results of the bathymetric survey were used to develop a digital map and a 3D model for the Bay basin and to detect an underwater volcanic dome. Comparison of geothermal and bathymetric data permitted delineation of the outer and inner ring faults that surround the atrio of Uratman Volcano. This evidence shows that the volcano is active at the present time.     

Abnormal Variation of H2, Hg and Other Fault Soil Gases Before Earthquake

By observing the variation of fault soil gases,we can understand the activity of faults and information on earthquake precursors.Two fault soil gas observation spots were set up at the Xiadian fault east of Beijing and at the Houhaoyao geothermal area in Huailai(Hebei Province)during November-December 1989.Concentrations of fault soil gases H2,Ar,CO2,CH4,Hg,etc.were observed.Before several moderate-strong earthquakes in 1990,the concentrations of fault soil gases such as H2 and Hg all showed abnormal variations quite significantly.In this paper,we mainly discuss the relation of these fault soil gases to earthquake activity.