Solar wind contribution to surficial lunar water: Laboratory investigations

Remote infrared spectroscopic measurements have recently re-opened the possibility that water is present on the surface of the Moon. Analyses of infrared absorption spectra obtained by three independent space instruments have identified water and hydroxyl (-OH) absorption bands at ∼3 μm within the lunar surface. These reports are surprising since there are many mechanisms that can remove water but no clear mechanism for replenishment. One hypothesis, based on the spatial distribution of the -OH signal, is that water is formed by the interaction of the solar wind with silicates and other oxides in the lunar basalt. To test this hypothesis, we have performed a series of laboratory simulations that examine the effect of proton irradiation on two minerals: anorthite and ilmenite. Bi-directional infrared reflection absorption spectra do not show any discernable enhancement of infrared absorption in the 3 μm spectral region following 1 or 100 keV proton irradiation at fluences between 10¹⁶ and 10¹⁸ ions cm⁻². In fact, the post-irradiation spectra are characterized by a decrease in the residual O-H band within both minerals. Similarly, secondary ion mass spectrometry shows a decrease rather than an increase of the water group ions following proton bombardment of ilmenite. The absence of significant formation of either -OH or H₂O is ascribed to the preferential depletion of oxygen by sputtering during proton irradiation, which is confirmed by post-irradiation surface analysis using X-ray photoelectron spectroscopy measurements. Our results provide no evidence to support the formation of H₂O in the lunar regolith via implantation of solar wind protons as a mechanism responsible for the significant O-H absorption in recent spacecraft data. We determine an upper limit for the production of surficial -OH on the lunar surface by solar wind irradiation to be 0.5% (absorption depth).     

Preservation potential of implanted solar wind volatiles in lunar paleoregolith deposits buried by lava flows

The lunar surface is bathed in a variety of impacting particles originating from the solar wind, solar flares, and galactic cosmic rays. These particles can become embedded in the regolith and/or produce a range of other molecules as they pass through the target material. The Moon therefore contains a record of the variability of the solar and galactic particle fluxes through time. To obtain useful temporal snapshots of these processes, discrete regolith units must be shielded from continued bombardment that would rewrite the record over time. One mechanism for achieving this preservation is the burial of a regolith deposit by a later lava flow. The archival value of such deposits sandwiched between lava layers is enhanced by the fact that both the under- and over-lying lava can be dated by radiometric techniques, thereby precisely defining the age of the regolith layer and the geologic record contained therein. The implanted volatile species would be vulnerable to outgassing by the heat of the over-lying flow, at temperatures exceeding 300-700 °C. However, the insulating properties of the finely particulate regolith would restrict significant heating to shallow depths. We have therefore modeled the heat transfer between lunar mare basalt lavas and the regolith in order to establish the range of depths below which implanted volatiles would be preserved. We find that the full suite of solar wind volatiles, consisting predominantly of H and He, would survive at depths of ∼13-290 cm (for 1-10 m thick lava flows, respectively). A substantial amount of CO, CO₂, N₂ and Xe would be preserved at depths as shallow as 3.7 cm beneath meter-thick flows. Given typical regolith accumulation rates during mare volcanism, the optimal localities for collecting viable solar wind samples would involve stacks of thin mare lava flows emplaced a few tens to a few hundred Ma apart, in order for sufficient regolith to develop between burial events. Obtaining useful archives of Solar System processes would therefore require extraction of regolith deposits buried at quite shallow depths beneath radiometrically-dated mare lava flows. These results provide a basis for possible lunar exploration activities.     

The apparent lack of lunar-like swirls on Mercury: Implications for the formation of lunar swirls and for the agent of space weathering

Images returned by the MESSENGER spacecraft from the Mercury flybys have been examined to search for anomalous high-albedo markings similar to lunar swirls. Several features suggested to be swirls on the basis of Mariner 10 imaging (in the craters Handel and Lermontov) are seen in higher-resolution MESSENGER images to lack the characteristic morphology of lunar swirls. Although antipodes of large impact basins on the Moon are correlated with swirls, the antipodes of the large impact basins on Mercury appear to lack unusual albedo markings. The antipodes of Mercury’s Rembrandt, Beethoven, and Tolstoj basins do not have surface textures similar to the “hilly and lineated” terrain found at the Caloris antipode, possibly because these three impacts were too small to produce obvious surface disturbances at their antipodes. Mercury does have a class of unusual high-reflectance features, the bright crater-floor deposits (BCFDs). However, the BCFDs are spectral outliers, not simply optically immature material, which implies the presence of material with an unusual composition or physical state. The BCFDs are thus not analogs to the lunar swirls. We suggest that the lack of lunar-type swirls on Mercury supports models for the formation of lunar swirls that invoke interaction between the solar wind and crustal magnetic anomalies (i.e., the solar-wind standoff model and the electrostatic dust-transport model) rather than those models of swirl formation that relate to cometary impact phenomena. If the solar-wind standoff hypothesis for lunar swirls is correct, it implies that the primary agent responsible for the optical effects of space weathering on the Moon is solar-wind ion bombardment rather than micrometeoroid impact.     

Lunar atmospheric H2 detections by the LAMP UV spectrograph on the Lunar Reconnaissance Orbiter

We report on the detection of H₂ as seen in our analysis of twilight observations of the lunar atmosphere observed by the LAMP instrument aboard NASA’s Lunar Reconnaissance Orbiter. Using a large amount of data collected on the lunar atmosphere between September 2009 and March 2013, we have detected and identified, the presence of H₂ in the native lunar atmosphere, for the first time. We derive a surface density for H₂ of 1.2 ± 0.4 × 10³ cm⁻³ at 120 K. This is about 10 times smaller than originally predicted, and several times smaller than previous upper limits from the Apollo era data.     

Quantitative estimation of helium-3 spatial distribution in the lunar regolith layer

³He (helium-3) in the lunar regolith implanted by the solar wind is one of the most valuable resources because of its potential as a fusion fuel. The abundance of ³He in the lunar regolith is related to solar wind flux, lunar surface maturity and TiO₂ content, etc. A model of solar wind flux, which takes account of variations due to shielding of the nearside when the Moon is in the Earth's magnetotail, is used to present a global distribution of relative solar wind flux over the lunar surface. Using Clementine UV/VIS multispectral data, the global distribution of lunar surface optical maturity (OMAT) and the TiO₂ content in the lunar regolith are calculated. Based on Apollo regolith samples, a linear relation between ³He abundance and normalized solar wind flux, optical maturity, and TiO₂ content is presented. To simulate the brightness temperature of the lunar surface, which is the mission of the Chinese Chang-E project's multichannel radiometers, a global distribution of regolith layer thickness is first empirically constructed from lunar digital elevation mapping (DEM). Then an inversion approach is presented to retrieve the global regolith layer thickness. It finally yields the total amount of ³He per unit area in the lunar regolith layer, which is related to the regolith layer thickness, solar wind flux, optical maturity and TiO₂ content, etc. The global inventory of ³He is estimated as 6.50×¹⁰⁸ kg, where 3.72×¹⁰⁸ kg is for the lunar nearside and 2.78×¹⁰⁸ kg is for the lunar farside.     

Near-infrared laboratory spectra of solid H2O/CO2 and CH3OH/CO2 ice mixtures

We present near-IR spectra of solid CO₂ in H₂O and CH₃OH, and find they are significantly different from that of pure solid CO₂. Peaks not present in either pure H₂O or pure CO₂ spectra become evident when the two are mixed. First, the putative theoretically forbidden CO₂ (2ν₃) overtone near 2.134 μm (4685 cm⁻¹), that is absent from our spectrum of pure solid CO₂, is prominent in the spectra of H₂O/CO₂=5 and 25 mixtures. Second, a 2.74-μm (3650 cm⁻¹) dangling OH feature of H₂O (and a potentially related peak at 1.89 μm) appear in the spectra of CO₂-H₂O ice mixtures, but are probably not diagnostic of the presence of CO₂. Other CO₂ peaks display shifts in position and increased width because of intermolecular interactions with H₂O. Warming causes some peak positions and profiles in the spectrum of a H₂O/CO₂=5 mixture to take on the appearance of pure CO₂. Absolute strengths for absorptions of CO₂ in solid H₂O are estimated. Similar results are observed for CO₂ in solid CH₃OH. Since the CO₂ (2ν₃) overtone near 2.134 μm (4685 cm⁻¹) is not present in pure CO₂ but prominent in mixtures, it may be a good observational (spectral) indicator of whether solid CO₂ is a pure material or intimately mixed with other molecules. These observations may be applicable to Mars polar caps as well as outer Solar System bodies.     

Solar infrared occultation observations by SPICAM experiment on Mars-Express: Simultaneous measurements of the vertical distributions of H2O, CO2 and aerosol

The infrared AOTF spectrometer is a part of the SPICAM experiment onboard the Mars-Express ESA mission. The instrument has a capability of solar occultations and operates in the spectral range of 1-1.7 μm with a spectral resolution of ∼3.5 cm⁻¹. We report results from 24 orbits obtained during MY28 at Ls 130°-160°, and the latitude range of 40°-55° N. For these orbits the atmospheric density from 1.43 μm CO₂ band, water vapor mixing ratio based on 1.38 μm absorption, and aerosol opacities were retrieved simultaneously. The vertical resolution of measurements is better than 3.5 km. Aerosol vertical extinction profiles were obtained at 10 wavelengths in the altitude range from 10 to 60 km. The interpretation using Mie scattering theory with adopted refraction indices of dust and H₂O ice allows to retrieve particle size (reff∼0.5-1 μm) and number density (∼1 cm⁻³ at 15-30 km) profiles. The haze top is generally below 40 km, except the longitude range of 320°-50° E, where high-altitude clouds at 50-60 km were detected. Optical properties of these clouds are compatible with ice particles (effective radius reff=0.1-0.3 μm, number density N∼10 cm−3) distributed with variance νeff=0.1-0.2 μm. The vertical optical depth of the clouds is below 0.001 at 1 μm. The atmospheric density profiles are retrieved from CO₂ band in the altitude range of 10-90 km, and H₂O mixing ratio is determined at 15-50 km. Unless a supersaturation of the water vapor occurs in the martian atmosphere, the H₂O mixing ratio indicates ∼5 K warmer atmosphere at 25-45 km than predicted by models.     

Lunar X-ray fluorescence observations by the Chandrayaan-1 X-ray Spectrometer (C1XS): Results from the nearside southern highlands

The Chandrayaan-1 X-ray Spectrometer (C1XS) flown on-board the first Indian lunar mission Chandrayaan-1, measured X-ray fluorescence spectra during several episodes of solar flares during its operational period of ∼9 months. The accompanying X-ray Solar Monitor (XSM) provided simultaneous spectra of solar X-rays incident on the Moon which are essential to derive elemental chemistry. In this paper, we present the surface abundances of Mg, Al, Si, Ca and Fe, derived from C1XS data for a highland region on the southern nearside of the Moon. Analysis techniques are described in detail including absolute X-ray line flux derivation and conversion into elemental abundance. The results are consistent with a composition rich in plagioclase with a slight mafic mineral enhancement and a Ca/Al ratio that is significantly lower than measured in lunar returned samples. We suggest various possible scenarios to explain the deviations.     

The surficial nature of lunar swirls as revealed by the Mini-RF instrument

Lunar swirls are optically bright, sinuous albedo features found on the Moon. The Mini-RF synthetic aperture radar on the Lunar Reconnaissance Orbiter has provided a comprehensive set of X- and S-Band radar images of these enigmatic features, including the first radar observations of swirls on the farside of the Moon. A few general remarks can be made about the nature of the lunar swirls from this data set. First, the average radar properties of lunar swirls are identical to nearby non-swirl regions, in both total radar backscatter and circular polarization ratio (CPR). This implies that average centimeter-scale roughness and composition within the high-albedo portions of the swirls do not differ appreciably from the surroundings, and that the high optical reflectance of the swirls is related to a very thin surface phenomenon (less than several decimeters thick) not observable with X- or S-Band radar. Secondly, bright swirl material appears to be stratigraphically younger than a newly discovered impact melt flow at Gerasimovich D. This observation indicates that the swirls are capable of forming over timescales less than the age of the crater. The Mini-RF data set also provides clues to the origin of the lunar swirls. In at least one case, the presence of an enhanced crustal magnetic field appears to be responsible for the preservation of a high-albedo ejecta blanket around an otherwise degraded crater, Descartes C. The degree of degradation of Descartes C suggests it should not be optically bright, yet it is. This implies that the enhanced albedo is related to its location within a magnetic anomaly, and hence supports an origin hypothesis that invokes interaction between the solar wind and the magnetic anomaly.     

Minerals mapping of the lunar surface with Clementine UVVIS/NIR data based on spectra unmixing method and Hapke model

The distribution of minerals on the lunar surface is information which could contribute to studying lunar origin and evolution. In this paper, the distribution of clinopyroxene, orthopyroxene, olivine, ilmenite, and plagioclase on the lunar surface has been mapped based on Hapke radiative transfer model and linear unmixing of spectra with Clementine UVVIS/NIR data. The results have been validated on the basis of minerals modal abundance data of the Apollo samples, and problems in the minerals abundance mapping have been analyzed. The validation based on analysis data of Apollo samples indicates that plagioclase mapped in this paper represents the total abundance of plagioclase and agglutinitic glass. The minerals mapping results show that the lunar surface is mainly composed of pyroxene, plagioclase, agglutinitic glass, and ilmenite. Basalt in the lunar mare is mainly composed of clinopyroxene and ilmenite, and lunar highland is mainly composed of plagioclase and agglutinitic glass. Orthopyroxene is mainly distributed on the north of Mare Imbrium, on the south of Maria and Aitken Basin. According to our results, there is probably no large area of olivine distribution on the lunar surface which is different from earlier published results. Therefore, emphasis should be put on the olivine distribution in the minerals mapping using hyperspectral data such as M³ of Chandrayaan-1 and IIM of ChangE-1.     

Deconvolution of lunar olivine reflectance spectra: Implications for remote compositional assessment

Lunar olivines typically contain inclusions of Cr-spinel (chromite) that influence their measured optical properties. These altered optical properties complicate modeled predictions of olivine composition from reflectance spectra. Approaches developed for inclusion-free terrestrial olivine spectra must be modified to be applied to chromite-bearing lunar olivine spectra. We present a revised approach for predicting the compositions of chromite-bearing lunar olivines using the Modified Gaussian Model (MGM). The results of this revised approach for chromite-bearing lunar olivines are consistent with previous results for terrestrial olivine reflectance spectra, and successfully predict the olivine’s composition. These results are an important step in compositional assessment of remotely-sensed olivine spectra, and are essential to ongoing investigations of that topic. Our results are based on a limited set of available lunar olivine separates, and would be strengthened by the inclusion of additional compositions.     

A 3D hybrid simulation study of the electromagnetic field distributions in the lunar wake

A three-dimensional hybrid code is used to study the electromagnetic disturbances in the solar wind that arise due to the absorption effect of the Moon. Due to the nearly insulating nature of the Moon, interplanetary magnetic fields (IMFs) can move through the interior without hindrance. However, the near-vacuum created in the wake region due to the lunar absorption effect will lead to enhancement of the strength of the magnetic field by a factor of about 1.4 in the middle of the lunar wake and lead to depletions at two sides. The situations arising from different orientations of the interplanetary magnetic fields relative to the radial direction are compared. Asymmetries of the inward diffusions both along and perpendicular to the field lines are also observed. The electric field formed from the plasma convection could reach a magnitude of 0.2–0.8 mV/m at the border of the wake. The role of the electric field on the inward accelerations is important to the geometry of the lunar wake.     

‘Direct’ evidence for water (H2O) in the sunlit lunar ambience from CHACE on MIP of Chandrayaan I

Direct detection of water in its vapour phase in the tenuous lunar environment through in situ measurements carried out by the Chandra’s Altitudinal Composition Explorer (CHACE) payload, onboard the Moon Impact Probe (MIP) of Chandrayaan I mission vindicates the presence of water on the surface of the moon in form of ice at higher lunar latitudes inferred from IR absorption spectroscopy, (especially that of OH), by the Moon Mineralogy Mapper (M³) of Chandrayaan I. The quadrupole mass spectrometer based payload, CHACE, sampled the lunar neutral atmosphere every 4 s with a broad latitudinal (∼40°N to 90°S, with a resolution of ∼0.1°) and altitudinal (from 98 km up to impact on the lunar surface with a resolution of ∼0.25 km) coverage in the sunlit side of the moon for the first time. These two (CHACE and M³) complementary experiments are shown to collectively provide unambiguous signatures for the distribution of water in solid and gaseous phases in Earth’s moon.     

A comparison of the ultraviolet to near-infrared spectral properties of Mercury and the Moon as observed by MESSENGER

Measurements of the disk-integrated reflectance spectrum of Mercury and the Moon have been obtained by the MESSENGER spacecraft. A comparison of spectra from the two bodies, spanning the wavelength range 220-1450 nm, shows that the absolute reflectance of Mercury is lower than that of the nearside waxing Moon at the same phase angle with a spectral slope that is less steep at visible and near-infrared wavelengths. We interpret these results and the lack of an absorption feature at a wavelength near 1000 nm as evidence for a Mercury surface composition that is low in ferrous iron within silicates but is higher in the globally averaged abundance of spectrally neutral opaque minerals than the Moon. Similar conclusions have been reached by recent investigations based on observations from both MESSENGER and Mariner 10. There is weak evidence for a phase-reddening effect in Mercury that is slightly larger in magnitude than for the lunar nearside. An apparent absorption in the middle-ultraviolet wavelength range of the Mercury spectrum detected from the first MESSENGER flyby of Mercury is found to persist in subsequent observations from the second flyby. The current model of space weathering on the Moon, which also presumably applies to Mercury, does not provide an explanation for the presence of this ultraviolet absorption.     

Distributions of H2O and CO2 ices on Ariel, Umbriel, Titania, and Oberon from IRTF/SpeX observations

We present 0.8-2.4 μm spectral observations of uranian satellites, obtained at IRTF/SpeX on 17 nights during 2001-2005. The spectra reveal for the first time the presence of CO₂ ice on the surfaces of Umbriel and Titania, by means of 3 narrow absorption bands near 2 μm. Several additional, weaker CO₂ ice absorptions have also been detected. No CO₂ absorption is seen in Oberon spectra, and the strengths of the CO₂ ice bands decline with planetocentric distance from Ariel through Titania. We use the CO₂ absorptions to map the longitudinal distribution of CO₂ ice on Ariel, Umbriel, and Titania, showing that it is most abundant on their trailing hemispheres. We also examine H₂O ice absorptions in the spectra, finding deeper H₂O bands on the leading hemispheres of Ariel, Umbriel, and Titania, but the opposite pattern on Oberon. Potential mechanisms to produce the observed longitudinal and planetocentric distributions of the two ices are considered.     

An in-depth look at the lunar crater Copernicus: Exposed mineralogy by high-resolution near-infrared spectroscopy

Newly acquired, sequentially spaced, high-resolution near-infrared spectra across the central section of crater Copernicus’ interior have been analyzed using a range of complementary techniques and indexes.We have developed a new interpretative method based on a multiple stage normalization process that appears to both confirm and expand on previous mineralogical estimations and mapping. In broad terms, the interpreted distribution of the principle mafic species suggests an overall composition of surface materials dominated by calcium-poor pyroxenes and minor olivine but with notable exceptions: the southern rim displays strong ca-rich pyroxene absorption features and five other locations, the uppermost northern crater wall, opposite rim sections facing the crater floor, and the central peak Pk1 and at the foot of Pk3, show instead strong olivine signatures.We also propose impact glass an alternative interpretation to the source of the weak but widespread olivine-like spectral signature found in low-reflectance samples, since it probably represents a major regolith constituent and component in large craters such as Copernicus.The high quality and performance of the SIR-2 data allows for the detection of diagnostic key mineral species even when investigating spectral samples with very subdued absorption features, confirming the intrinsic high-quality value of the returned data.     

Asymmetries in the distribution of H2O and CO2 in the inner coma of Comet 9P/Tempel 1 as observed by Deep Impact

Prior to the impact event, Deep Impact monitored the ambient inner coma of Comet 9P/Tempel 1 at high spatial resolution in July 2005. Gaseous H₂O and CO₂ are unambiguously detected in the infrared spectra collected with the HRI-IR spectrometer aboard Deep Impact. Detailed distribution maps of these volatiles in the inner coma, within 60 km from the nucleus, are produced from the integrated emission bands of H₂O (2.66 μm) and CO₂ (4.26 μm). Uncorrelated asymmetries are determined in the spatial distribution of both species indicating chemical heterogeneities within the nucleus. Although present at some abundance surrounding the entire nucleus, H₂O has a pronounced enhancement in abundance in the sunward direction rotational phases, evidence that the dominant process of subliming water ice from the nucleus is solar heating. In contrast, CO₂ is enhanced in the regions near the negative rotational pole of the nucleus, suggesting localized outgassing there. Both species show an increase in radiance above the limb of the nucleus toward Ecliptic North. The distribution maps also suggest that the process of dust removal from the nucleus is strongly connected to the outgassing of volatiles. Detailed study of these coma asymmetries gives insight to the relative abundances of the dominant molecular components of the inner coma, source regions of the native volatiles, anisotropic outgassing of the nucleus, and the formation and evolution of the nucleus. A quiescent water production rate for Tempel 1 on July 4, 2005, is estimated to be .     

Revised ab initio models for H2-H2 collision-induced absorption at low temperatures

A revised ab initio calculation of the H₂-H₂ collision-induced absorption results in significant differences compared with the work of J. Borysow et al. [Borysow, J., Trafton, L., Frommhold, L., Birnbaum, G., 1985. Astrophys. J. 296, 644-654] for wavenumbers greater than 600 cm⁻¹ and temperatures below 120 K. The revision has significant influence on the spectra of Uranus and Neptune, and essentially removes the need for models with “super-solar” helium abundances or stratospheric hazes to explain the spectrum of Uranus.     

Orphan radiogenic noble gases in lunar breccias: evidence for planet pollution of the Sun?

Surface-correlated noble gases in lunar soils are primarily implanted SW (solar wind) noble gases. However, they also include apparently orphan radiogenic ⁴⁰Ar, ¹²⁹Xe, and ²⁴⁴Pu-derived fission Xe in excess of plausible primordial solar origin. These orphan radiogenic components are usually assigned a lunar origin, in a scenario in which radiogenic noble gases produced in the lunar interior were degassed into the transient atmosphere and then re-implanted to the lunar surface together with SW. There are some quantitative difficulties with this scenario, however, and it requires special constraints on the degassing history of the Moon that have not emerged from more general thermal history models. We therefore urge consideration of alternative hypotheses. As a possible source for the orphan radiogenic noble gases, we have examined planetary pollution of the Sun, as suggested by studies of extrasolar planetary systems (e.g., Murray et al., 2001, Astrophys. J. 555, 801-815; Israelian et al., 2001, Nature 411, 163-166). Pollution of the Sun by 2M_⊕ (two Earth mass) planetary materials (Murray et al., 2001, Astrophys. J. 555, 801-815) is likely not significant for Ar but could be important to account for orphan Xe in the Moon.     

Constraints on the source of lunar cataclysm impactors

Multiple impact basins formed on the Moon about 3.8 Gyr ago in what is known as the lunar cataclysm or Late Heavy Bombardment. Many workers currently interpret the lunar cataclysm as an impact spike primarily caused by main-belt asteroids destabilized by delayed planetary migration. We show that morphologically fresh (class 1) craters on the lunar highlands were mostly formed during the brief tail of the cataclysm, as they have absolute crater number density similar to that of the Orientale basin and ejecta blanket. The connection between class 1 craters and the cataclysm is supported by the similarity of their size-frequency distribution to that of stratigraphically-identified Imbrian craters. Majority of lunar craters younger than the Imbrium basin (including class 1 craters) thus record the size-frequency distribution of the lunar cataclysm impactors. This distribution is much steeper than that of main-belt asteroids. We argue that the projectiles bombarding the Moon at the time of the cataclysm could not have been main-belt asteroids ejected by purely gravitational means.