Elemental and isotopic (Si and O) tracing of glass alteration mechanisms

To better understand glass alteration mechanisms, especially alteration layers formation, leaching experiments of a borosilicate glass (SON68) doped with a different rare earth element (La, Ce, or Nd) with solutions rich in ²⁹Si and ¹⁸O were carried out. The coupled analyses of glass, alteration products, and solution led to a complete elemental and isotopic (²⁹Si and ¹⁸O) budget. They revealed different behaviours of elements that depend not only on their structural role in the glass, but also on their affinity for alteration products (gel, phyllosilicates, phosphates). However, analyses of both glass and solution are not sufficient to describe the real exchanges occurring between glass and solution. The use of ²⁹Si and ¹⁸O tracers gives new insights on the formation of alteration layers. During alteration the phyllosilicates records the isotopic variations of the leaching solution. Their isotopic signatures highlight a mechanism of dissolution/precipitation, which implies equilibrium between the secondary phases and the solution. On the other hand the gel isotopic signature, that is intermediate between the glass and the solution, substantiates the hypothesis that the gel is formed by hydrolysis/condensation reactions. This mechanism can thus explain the influence of the gel formation conditions (alteration conditions, solution saturation) on the structure (reorganisation) and texture (porosity) of this layer and on its protective effect. These hydrolysis/condensation reactions are also certainly involved in the aluminosilicate glass alteration and in the formation of palagonite.     

Dolomite effect on borosilicate glass alteration

Dolomite (CaMg(CO₃)₂) is one of the common rock-forming minerals in many geological media, in particular in clayey layers that are currently considered as potential host formations for a deep radioactive waste disposal facility. Magnesium in solution is one of the elements known to potentially enhance the alteration of nuclear glasses. The alteration of borosilicate glasses with dolomite as a Mg-bearing mineral source was investigated for 8 months in batch tests at 90 °C. Glass composition effects were investigated through two compositions (SiBNaAlCaZrO and SiBNaAlZrO) differing in their Ca content. The Ca-rich glass alteration is slightly enhanced in the presence of dolomite compared to the alteration observed in pure water. This greater alteration is explained by the precipitation of Mg silicate phases on the dolomite and glass surfaces. In contrast, the Ca-free glass alteration decreases in the presence of dolomite compared to the alteration observed in pure water. This behavior is explained by Ca incorporation in the amorphous layer (formed during glass alteration) coming from dolomite dissolution. Calcium acts as a layer reorganizer and limits glass alteration by reducing the diffusion of reactive species through the altered layer. Modeling was performed using the GRAAL model implemented within the CHESS/HYTEC geochemical code to discriminate and interpret the mechanisms involved in glass/dolomite interactions. Magnesium released by dolomite dissolution reacts with silica provided by glass alteration to form Mg silicates. This reaction leads to a pH decrease. The main mechanism controlling glass alteration is the ability of dolomite to dissolve. During the experiment the quantities of secondary phases formed were very small, but for longer time scales, this mechanism could supply sufficient Mg in solution to form large amounts of Mg silicates and sustain glass alteration. The ability of the GRAAL model to reproduce the concentrations of elements in solution and solid phases regardless of the amount of dolomite and the glass composition strongly supports the basic modeling hypothesis.     

A fractured roman glass block altered for 1800 years in seawater: Analogy with nuclear waste glass in a deep geological repository

Fractured archaeological glass blocks altered 1800 years in seawater are investigated because of their morphological analogy with vitrified nuclear waste. They provide an opportunity for understanding glass alteration in variable confined media (cracks), by studying an actual ancient system in a known stable natural environment. Characterization of the crack network from two-dimensional trace maps (length, alteration thickness, orientation) allows us to determine the three-dimensional geometric parameters (crack density, fracture ratio) and the percentage of alteration, using stereological relations. This methodology could be applied to nuclear glass. From a representative archaeological glass block, we showed that the surface developed by the cracks is 86 ± 27 times greater than the geometric surface but the volumetric alteration is 12.2 ± 4.1%, which is only 12 times greater than the volumetric alteration of the block periphery (about 1 vol%). This unexpected low value is explained by the large variation of the alteration thicknesses in the different types of cracks in relation with their location in the block. The alteration thickness is usually smaller in the internal zone than in the border zone. The alteration layers resulted from three main mechanisms (interdiffusion, glass dissolution, and secondary phase precipitation) leading to two different alteration products (a sodium-depleted layer and mainly a Mg-smectite). Geometric parameters such as the glass surface area/solution volume ratio and transport parameters (renewal of the alteration solution) strongly affected the glass dissolution kinetics. The confined conditions and the diffusive transport of reactive species favor low alteration kinetics. The precipitation of secondary phases also results in sealing of the cracks. Consequently, although it is not known if subcritical crack growth occurred, internal cracks account for only a minor contribution to the overall alteration. These results improve our understanding of alteration in cracks for assessing the predominant physical and chemical parameters that must be considered in long-term nuclear glass modeling.     

Structural changes of synthetic opal by heat treatment

The structural changes of synthetic opal by heat treatment up to 1,400 °C were investigated using scanning electron microscopy, X-ray diffraction, and Fourier transform infrared and Raman spectroscopies. The results indicate that the dehydration and condensation of silanol in opal are very important factors in the structural evolution of heat-treated synthetic opal. Synthetic opal releases water molecules and silanols by heat treatment up to 400 °C, where the dehydration of silanol may lead to the condensation of a new Si–O–Si network comprising a four-membered ring structure of SiO₄ tetrahedra, even at 400 °C. Above 600 °C, water molecules are lost and the opal surface and internal silanol molecules are completely dehydrated by heat effect, and the medium-temperature range structure of opal may begin to thermally reconstruct to six-membered rings of SiO₄ tetrahedra. Above 1,000 °C, the opal structure almost approaches that of silica glass with an average structure of six-membered rings. Above 1,200 °C, the opal changes to low-cristobalite; however, minor evidence of low-tridymite stacking was evident after heat treatment at 1,400 °C.     

Alteration of nuclear glass in contact with iron and claystone at 90 °C under anoxic conditions: Characterization of the alteration products after two years of interaction

The present study investigates the alteration of a fractured glass block in contact with iron and Callovo-Oxfordian claystone at 90 °C under anoxic and water-saturated conditions. The alteration rates and the nature of glass alteration products at the different compact interfaces (glass-clay, glass-iron) and in cracks were assessed by solution chemistry and microscopic-scale techniques (scanning electron microscopy coupled with energy-dispersive X-ray microscopy, microRaman spectroscopy, and X-ray absorption fine structure spectroscopy). A significant but modest (two-fold) increase in glass alteration in contact with steel was observed, leading to an average alteration rate over the experiment of about 0.007–0.014 g/m²/d. This rate is significantly lower than forward rate r₀ in clay-equilibrated groundwater (1.7 g/m²/d), indicating that a decrease of the alteration rate was not hindered by the steel presence. The corrosion–alteration interface was made up of successive layers of corrosion products in contact with iron, a layer of Fe silicates, and an altered glass layer enriched in Fe. Characterization of the glass block in direct contact with claystone revealed that the thickness of altered glass was much more important than at the glass-iron interface. The altered glass layer in contact with clay was slightly enriched in Fe and Mg, and depleted in alkali cations. Altered glass layers in cracks were usually limited to fringes thinner than 2 μm, with a thickness decreasing from the crack mouth, indicating that alteration is controlled by transport in the cracks. The fractures were partially filled with calcite and lanthanide hydroxocarbonate precipitates. These results contribute to the understanding of nuclear vitrified waste-iron-corrosion products interactions in a deep geological repository.     

Hydrothermal alteration of basalt by seawater under seawater-dominated conditions

Fresh mid-ocean ridge basalt glass and diabase have been reacted with seawater at 150–300°C, 500 bar, and water/rock mass ratios of 50, 62, and 125, using experimental apparatus which allowed on-line sampling of solution to monitor reaction progress. These experiments characterize reaction under what we have called “seawater-dominated” conditions of hydrothermal alteration.In an experiment at 300°C, basalt glass undergoing alteration removed nearly all Mg²⁺ from an amount of seawater 50 times its own mass. In the process, the glass was converted entirely to mixed-layer smectite-chlorite, anhydrite, and minor hematite. Removal of Mg from seawater occurred as a Mg(OH)₂ component incorporated into the secondary clay. This produced a precipitous drop in solution pH early in the experiment, accompanied by a dramatic increase in the concentrations of Fe, Mn, and Zn in solution. As Mg removal neared completion and the glass was hydrolyzed, pH rose again and heavy metal concentrations dropped.At water/rock ratios of 62 and 125 and 150–300°C, the mineral assemblage produced was similar to that at a water/rock ratio of 50. Solution chemistry, however, contrasted with the earlier experiment in that Mg concentrations in solution were greater and pH lower. This caused significant leaching of heavy metals. At 300°C nearly all of the Na, Ca, Cu, Zn, and CO₂ and most of the K, Ba, Sr, and Mn were leached from the silicates. H₂S, Al, Si, and possibly Co were also significantly mobilized, whereas V, Cr, and Ni were not. Little or no seawater sulfate was reduced.Although submarine hot spring solutions sampled to date along mid-ocean ridges clearly come from rock-dominated hydrothermal systems, evidence from ocean floor metabasalts and from heat flow studies indicates that seawater-dominated conditions of alteration prevail at least locally both in axial hightemperature systems and in ridge flank systems at lower temperatures.     

Influence of glass composition and alteration solution on leached silicate glass structure: A solid-state NMR investigation

A multinuclear solid-state NMR investigation of the structure of the amorphous alteration products (so called gels) that form during the aqueous alteration of silicate glasses is reported. The studied glass compositions are of increasing complexity, with addition of aluminum, calcium, and zirconium to a sodium borosilicate glass. Two series of gels were obtained, in acidic and in basic solutions, and were analyzed using ¹H, ²⁹Si, and ²⁷Al MAS NMR spectroscopy. Advanced NMR techniques have been employed such as ¹H-²⁹Si and ¹H-²⁷Al cross-polarization (CP) MAS NMR, ¹H double quantum (DQ) MAS NMR and ²⁷Al multiple quantum (MQ) MAS NMR. Under acidic conditions, ²⁹Si CP MAS NMR data show that the repolymerized silicate networks have similar configuration. Zirconium as a second nearest neighbor increases the ²⁹Si isotropic chemical shift. The gel porosity is influenced by the pristine glass composition, modifying the silicon-proton interactions. From ¹H DQ and ¹H-²⁹Si CP MAS NMR experiments, it was possible to discriminate between silanol groups (isolated or not) and physisorbed molecular water near Si (Q²), Si (Q³), and Si (Q⁴) sites, as well as to gain insight into the hydrogen-bonding interaction and the mobility of the proton species. These experiments were also carried out on heated samples (180 °C) to evidence hydrogen bonds between hydroxyl groups on molecular water. Alteration in basic media resulted in a gel structure that is more dependent on the initial glass composition. ²⁷Al MQMAS NMR data revealed an exchange of charge compensating cations of the [AlO₄]⁻ groups during glass alteration. ¹H-²⁷Al CP MAS NMR data provide information about the proximities of these two nuclei and two aluminum environments have been distinguished. The availability of these new structural data should provide a better understanding of the impact of glass composition on the gel structure depending on the nature of the alteration solution.     

Near hydrothermal alteration of obsidian glass: Implications for long term performance assessments

Obsidian glass alteration experiments under near hydrothermal conditions were performed to study mechanism and conditions of formation of altered minerals. X-ray diffraction patterns and cell dimensions of the specimens treated at 150, 200 and 300°C (pH = 8.03) revealed appearance of three main minerals — illite (9.5–10 Å), chlorite (7.04 Å) and halloysite (10.25Å). Further increase in the pH favours matrix dissolution with the formation of secondary altered layers. SEM-EDS study show that the alteration causes smoothing of the grain surfaces. These surfaces exhibits etch pits and series of depressions, formed by the process of dissolution. SEM — Back Scattered Electron images of obsidian specimens show thin laminae of smectite, with foliated bulky rims and cellular honeycomb texture, formed by precipitation from the solution as well as by direct transformation of glass during alteration. This mechanism is resulting from the alteration of alkalis by ionic inter-diffusion with H₃O⁺ and H⁺ and inward diffusion of H₂O, leading to free diffusion of silica into solution and then to a local rearrangement of the glass framework. Thus, a direct transformation of glass into clay minerals is the major reaction mechanism as evidenced by the mechanism of glass dissolution and subsequent mineral precipitation.     

Behaviour of actinides (Th,U, Np and Pu) and rare earths (La,Ce and Nd) during aqueous leaching of a nuclear glass under geological disposal conditions

Leaching experiments in aqueous media were carried out on non-radioactive and radioactive nuclear waste glasses to investigate the release behaviour of 4 actinides (Th, U, Np and Pu) and 3 lanthanides (La, Ce and Nd) from the solid into solution. The experiments were conducted under flowing conditions using synthetic aqueous solutions. The lanthanide and actinide concentrations were measured in the leachates before and after filtration to 0.45 μm and 1.8 nm.Over 98.5% of the lanthanides and Th released from the glass were retained in the alteration products on the glass surface, probably coprecipitated with a siliceous gel. The retention was enhanced by the presence in the gel of 20 wt% P oxides from the initial 5 × 10⁻³ M PO₄ solution. In the leachates, more than 90% of the lanthanides and Th were associated with colloidal particles.Uranium and Np retention varied from 40% in a 5 × 10⁻³ M CO₃ medium to 95% in a 5 × 10⁻³ M PO₄ medium. In the CO₃ medium, U and Np formed stable CO₃ complexes that diminished the formation of precipitates; in the PO₄ medium, precipitation of PO₄ or more complex phases may have occurred.Pu exhibited atypical behaviour to the extent that it was strongly bonded to colloidal particles in solution, concentrated in the fraction exceeding 0.45 μm, and modifyed the calculated Pu leach rates. These particles may be the result of limited disaggregation of the alteration film. As most of the Pu was found at valence IV, it may be strongly retained in the alteration layer by precipitation or coprecipitation.Under oxidizing conditions, Np and U are found at high valences as Np(V) and U(VI), yielding charged forms in solution (NpO₂⁺ and UO₂⁺). The lanthanides, Th and Pu were present at lower valences as Ln(III), Th(IV) and Pu(IV), yielding Ln³⁺, Th⁴⁺ and Pu⁴⁺ in oxidizing media. The different behaviour of U and Np compared with the lanthanides, Th or Pu, observed during these experiments shows that the valence is the determining factor, and must be taken into account in assessing the evolution of radionuclides during the alteration of nuclear waste glass.     

Reactive transport processes occurring during nuclear glass alteration in presence of magnetite

In this study, we have investigated and clarified the processes occurring during the alteration of SON68 glass – the reference nuclear glass for the waste arising from reprocessing of spent fuel from light water reactors – at 50 °C in Callovo-Oxfordian clay groundwater in presence of magnetite. Magnetite is known to be one of the iron corrosion products expected to be present in the vicinity of glass in geological disposal conditions. The effects of the amount of magnetite relative to the glass surface and the transport of aqueous species during glass alteration were studied. A first series of experiments was focused on the effect of various magnetite amounts by mixing and altering glass and magnetite powders. In a second series of experiments, magnetite was separated from the glass by a diffusive barrier in order to slow down the transport of aqueous species. Glass alteration kinetics were analyzed and solids were characterized by a multiscale approach using Raman Spectroscopy, Scanning and Transmission Electron Microscopy, Energy-Dispersive X-ray and Scanning Transmission X-ray Microscopy coupled with Fe L_2,3-edge and C K-edge NEXAFS.It appears that glass alteration increases with the amount of magnetite and that the transport of aqueous species is a key parameter. Several processes have been identified such as (i) the silica sorption on the magnetite surface, (ii) the precipitation of Fe-silicates in the vicinity of the glass (iii) the precipitation of SiO₂ on the magnetite surface, (iv) the incorporation of Fe within the alteration layer. Process (iv) was not frequently observed, suggesting local variations in geochemical conditions. Moreover, this process is strongly influenced by the transport of aqueous species as indicated by the morphology and composition of the alteration layers. Indeed, when glass and magnetite are homogeneously mixed, the glass alteration layer consists of a gel enriched in Fe having the same Fe(II)/Fe(III) ratio as in magnetite. When both materials are separated by a diffusive barrier, the glass alteration layer consists of a porous gel (not enriched in iron) in presence of a mixture of Fe-silicates with Fe having the same valence as in magnetite, rare-earth precipitates and phyllosilicates. These results suggest that Fe incorporation within the alteration layer changes depending on the distance and the time required for dissolved Fe originating from the magnetite to reach the glass.     

Use of orthophosphate complexing agents to investigate mechanisms limiting the alteration kinetics of French SON 68 nuclear glass

This investigation was carried out to assess the protective properties of the alteration film that develops during aqueous alteration of the French SON 68 (R7T7-type) nuclear glass, notably by examining the behavior of some network-forming cations in the presence of complexing anions. Glass alteration was studied here in the presence of orthophosphate ions. Comparisons were established between two series of tests performed with a solution containing orthophosphate ions and control tests performed under the same conditions but without phosphates. The first series of experiments was performed under initial rate conditions (i.e. in dilute media) to assess the effect of pH and phosphate concentration on the initial glass dissolution rate. Under these conditions, which ensure maximum chemical affinity of the glass dissolution reaction, phosphate adsorption occurs at the reaction interface only with acid pH values, at which the glass dissolution reaction is strongly inhibited. The elements that form complexes with the phosphates (Al, Fe, etc.) partially control glass dissolution in acidic media. Additional experiments carried out under saturated conditions — notably with respect to Si — in a solution enriched with phosphates showed that rare earth and Ca phosphates precipitated in the outer region of the alteration film, maintaining a glass dissolution rate significantly higher than in the control experiment. These observations have several implications. (1) Comparing the results obtained in the presence of phosphates and in the reference medium, the authors demonstrate deductively that glass dissolution is limited by the inner portion of the alteration film, i.e. the amorphous gel. (2) A kinetic law of SON 68 glass dissolution cannot be based on silica alone; the results of these experiments contradict Grambow’s model. (3) With regard to control of the glass dissolution kinetics by the protective properties of the gel, this type of experiment shows that the relation between the chemical composition and the microstructure of the gel is an important aspect in modeling the glass alteration kinetics, but that it is still poorly understood.     

Impact of iron on nuclear glass alteration in geological repository conditions: A multiscale approach

Interactions between nuclear glass and Fe were investigated in a clayey environment to better understand the mechanisms and driving forces controlling the long-term behavior of high-level waste glass in a geological repository. An integrated experiment involving a Glass–Iron–Clay (GIC) stack was run at a laboratory scale in anoxic conditions for 2 years and the interfaces were characterized by a multiscale approach using scanning electron microscopy coupled with energy dispersive spectroscopy, transmission electron microscopy, Raman microspectroscopy and scanning transmission X-ray microscopy at the SLS Synchrotron. The characterization of glass alteration patterns on cross sections revealed an increase in glass alteration with the Fe content and the proximity between the glass and Fe. The alteration layers are polyphase and stratified with an inner porous gel layer incorporating Fe and an outer layer composed of nanocrystalline Fe-silicates. Several mechanisms which could affect the glass alteration kinetics and the transport properties of the alteration layer are proposed to explain this pattern: (i) consumption of hydrolyzed silica by precipitation of Fe-silicates; (ii) penetration of Fe within the gel porosity probably as precipitates such as Fe oxyhydroxide or Fe-silicates. These new data may imply some consequences when considering the long-term behavior of glass in geological disposal conditions.     

Heavy metal and sulfur transport during subcritical and supercritical hydrothermal alteration of basalt: Influence of fluid pressure and basalt composition and crystallinity

Crystalline basalt, diabase and basalt glass have been reacted with a Na-Ca-K-Cl fluid of seawater ionic strength at 350–425°C, 375–400 bars pressure and fluid/rock mass ratios of 0.5–1.0, to assess the role of temperature, basalt/diabase chemistry and texture on heavy metal and sulfur mobility during hydrothermal alteration.Alteration of basalt/diabase is characterized by cation fixation and hydrolysis reactions which show increased reaction progress with increasing temperature at constant pressure. Correspondingly, pH in a series of 400 bar experiments ranges from 4.8 to 2.7 at 350 and 425°C, respectively and is typically lower for alteration of a SiO₂-rich crystalline basalt than for other rock types, due, in part, to relatively high SiO₂ concentrations in solution. High SiO₂ concentrations stabilize hydrous Na- and Ca-rich alteration phases, causing pH to decrease according to reactions such as: 3.0 CaAl₂Si₂O₈ + 1.0 Ca⁺⁺ + 2.0 H₂O = 2.0 Ca₂Al₃Si₃O₁₂(OH) + 2.0 H⁺Phases experimentally produced include: mixed layer chlorite/smectite, Ca-rich amphibole and clinozoisite. Clinozoisite was identified as a replacement product of plagioclase from diabase-solution interaction experiments.In direct response to H⁺ production, dissolved Fe, Mn and H₂S concentrations increase dramatically. For early-stage reaction, H₂S typically exceeds Fe and Mn. However, at 425°C and after long-term reaction at 400°C, H₂S is lost from solution, apparently in response to pyrite replacement of oxide and silicate phases.Pyrrhotite formed at temperatures ≤ 375°C, whereas magnetite was identified in all run products, except from basalt glass alteration.Cu and Zn concentrations in solution are not simple functions of pH. These metals achieve greatest solubility in fluids from experiments at 375–400°C, except when basalt glass is used as a reactant. The relatively low concentrations of these species in solution during basalt glass reaction may be due to adsorption by fine grained alteration phases.     

Long-term modeling of alteration-transport coupling: Application to a fractured Roman glass

To improve confidence in glass alteration models, as used in nuclear and natural applications, their long-term predictive capacity has to be validated. For this purpose, we develop a new model that couples geochemical reactions with transport and use a fractured archaeological glass block that has been altered for 1800 years under well-constrained conditions in order to test the capacity of the model.The chemical model considers three steps in the alteration process: (1) formation of a hydrated glass by interdiffusion, whose kinetics are controlled by a pH and temperature dependent diffusion coefficient; (2) the dissolution of the hydrated glass, whose kinetics are based on an affinity law; (3) the precipitation of secondary phases if thermodynamic saturation is reached. All kinetic parameters were determined from experiments. The model was initially tested on alteration experiments in different solutions (pure water, Tris, seawater). It was then coupled with diffusive transport in solution to simulate alteration in cracks within the glass. Results of the simulations run over 1800 years are in good agreement with archaeological glass block observations concerning the nature of alteration products (hydrated glass, smectites, and carbonates) and crack alteration thicknesses. External cracks in direct contact with renewed seawater were altered at the forward dissolution rate and are filled with smectites (400−500 μm). Internal cracks are less altered (by 1 or 2 orders of magnitude) because of the strong coupling between alteration chemistry and transport. The initial crack aperture, the distance to the surface, and sealing by secondary phases account for these low alteration thicknesses. The agreement between simulations and observations thus validates the predictive capacity of this coupled geochemical model and increases more generally the robustness and confidence in glass alteration models to predict long-term behavior of nuclear waste in geological disposal or natural glass in the environment.     

Experimente zum Einfluß des Gesteinsglas-Chemismus auf die Zeolithbildung durch hydrothermale Umwandlung

In the formation of zeolites by hydrothermal alteration volcanic glasses are the starting material in most cases. The experiments aimed at demonstrating in what way the chemistry of the volcanic glass influences:

1. the alteration rate of the volcanic glass to zeolites,
2. the kind of zeolites being formed and their formation conditions.

Three volcanic glasses were used, a basaltic, a phonolitic, and a rhyolitic one. The experimental conditions were as similar as possible to the natural alteration conditions. Solutions being used: H₂O dist (pH ～5.5), 0.01 n NaOH (pH ～10.5), and solutions of similar chemistry to the natural ones. The temperatures were 180 °, 200 °, 250 ° C. The experiments were carried out both in closed and in open systems. The experimental results show a difference in the alteration rate and in the zeolites being formed between the basaltic and the phonolitic glasses on the one hand and the rhyolitic one on the other. In case of the closed system the SiO₂-poor volcanic glasses react more rapidly than the SiO₂-rich one. The zeolites being formed are chabazite, phillipsite, analcime respectively mordenite, analcime. In case of the open system the influence of the chemistry of the volcanic glass on the alteration rate and the zeolite being formed is less significant. Which zeolite is formed at a given temperature depends on: the chemistry of the starting material, the chemistry of the reacting solution and wether there is a closed or an open system.     

Na, Mg, Ni and Cs distribution and speciation after long-term alteration of a simulated nuclear waste glass: A micro-XAS/XRF/XRD and wet chemical study

Microscopic distribution and speciation of Na, Mg, Ni and Cs in a simulated (inactive) nuclear waste glass were studied using micro X-ray fluorescence (μ-XRF) and micro X-ray absorption spectroscopy (μ-XAS), after aqueous leaching during 12 years at 90 °C. Na and Mg are major constituents of the glass that can be used to determine the progress of the glass corrosion process and the nature of secondary alteration phases. Ni and Cs represent dose determining long-lived radionuclides (⁵⁹Ni, ¹³⁵Cs) in vitrified nuclear waste.The Na-Mg μ-XRF maps revealed that the core regions of the glass fragments are apparently unaltered and compositionally homogeneous, whereas rims and interstitial spaces are enriched with Mg-rich smectite formed during the leaching process. The micro X-ray absorption near edge structure (μ-XANES) spectra collected at the Mg K-edge in the altered zones show three sharp resonances typical for crystalline Mg-silicates. These resonances are distinctive of Mg occupying undistorted octahedral positions. In contrast, the μ-XANES spectra collected in the core zones of the glass fragments lack this resonance pattern and are identical to the spectra measured on the pristine (unleached) MW glass.Micro extended X-ray absorption fine structure (μ-EXAFS) and μ-XANES analyses at the Ni K-edge revealed three distinct Ni(II) species: (a) Ni uniformly distributed in the glass matrix, (b) micro-inclusions with high Ni concentrations and (c) Ni associated to the Mg-clay. The comparison with reference spectra of unleached MW and other Ni-bearing silicate glasses indicated that species (a) represents the original coordinative environment of Ni in the glass. The μ-EXAFS analyses revealed that species (b) is structural Ni in trevorite (NiFe₂O₄), which probably formed through unmixing processes during the cooling of the glass melt. The μ-EXAFS of species (c) could be successfully modeled assuming specific adsorption or incorporation of Ni into the lattice of trioctahedral Mg-clay minerals. Alternative models assuming other elements (Ni, Al, Fe) in addition to Mg in the second shell could not be fitted successfully.Aqueous concentration data were used to calculate the speciation of the leaching solutions. Saturation index (SI) calculations indicate undersaturation with respect to NiCO₃ and NiSO₄·7H₂O, but oversaturation with respect to β-Ni(OH)₂. The latter result is probably due to the omission of Ni borate and Ni silicate complexes in the speciation calculations, for which formation constants are not available. With the help of estimation techniques, we could infer that such complexes would dominate the Ni speciation and consequently reduce the SI below the saturation of β-Ni(OH)₂.The μ-XRF maps show that Cs is uniformly distributed in the MW glass, since no region with high Cs concentration could be detected. The Cs L_III-edge μ-XAS spectra were all very similar independently of the degree of alteration, indicating similar coordination environments of Cs in the core regions of the glass as well as in the secondary clays. These spectra largely differ from that measured for pollucite (a potential secondary Cs-phase in altered glasses) implying that the coordination environments of Cs in the MW glass and in pollucite are fundamentally different.The present study shows that μ-XRF and μ-XAS are essential tools in determining the fate and the retention mechanisms of radionuclides released from nuclear waste during aqueous alteration. Our spectroscopic analyses allowed us to exclude formation of specific Ni and Cs secondary solids (e.g. nepouite, β-Ni(OH)₂, pollucite) during the aqueous alteration. Ni and Cs are instead distributed as trace elements in the alteration phases formed by major elements during the leaching process. Our results imply that solid solution and/or adsorption equilibria, rather than pure phase solubility equilibria, are the adequate chemical models to determine Ni and Cs aqueous concentrations in performance assessments for radioactive waste repositories.     

Impact-generated carbonate melts in the Talemzane impact structure (Laghouat,Algeria)

The 1750-m-diameter, bowl-shaped Talemzane impact structure in Algeria is emplaced in Senonian or Eocene flint-bearing limestones. Field studies reveal a thin layer of light-colored polymict breccia with rounded, dark inclusions beneath a limestone megablock zone located at the top of the crater rim. The matrix of the rounded, dark inclusions consists of Si-rich glass and microcrystalline calcite. The latter is characterized by high contents of Si and Al suggesting rapid crystallization of the calcite from a melt. Backscattered electron imagery shows textural evidence for liquid immiscibility between the CaCO₃-rich and Si-rich glass of the matrix in the form of intermingling of calcite with Si-rich glass, coalesced blebs within silicate glass, individual calcite blebs within Si-rich glass, carbonate spherical globules in fresh Si-rich-glass, and sharp menisci between silicate and calcite blebs. These features are interpreted as evidence of impact melting of limestone and flint. The low totals of the Si-Al-Mg-rich glasses suggest that they contain significant amounts of volatiles. X-ray diffraction analyses indicate partial alteration of the Si-Mg-Al-rich glass to phyllosilicates.     

Mass transfer in hydrothermal alteration systems—A conceptual approach

At very low fluid/rock mass ratios the hydrothermal alteration process corresponds to isochemical recrystallisation of the primary rock. The resulting full equilibrium assemblage with the composition of an average crustal rock contains the phases albite, K-feldspar, K-mica, biotite, quartz and (depending on temperature) epidote, prehnite or one of the Ca-zeolites. Relative Na⁺, K⁺, Mg²⁺ and Ca²⁺—solution activities in such a rock-dominated alteration system are uniquely fixed and provide useful reference points with regard to the degree of attainment of full fluid/rock equilibrium. With increasing fluid/rock mass ratios the composition of now increasingly fluid-dominated alteration assemblages is determined by the interplay of three major processes: hydrogen metasomatism as a function of CO₂ reactivity increasing with the horizontal distance from major fluid upflow zones and leading to the formation of Al-enriched alteration assemblages; potassium metasomatism accompanied by silicification in or close to major fluid upflow zones leading to potassic and phyllic alteration; sodium, magnesium, calcium metasomatism associated with descending and heating solutions leading to propylytic alteration of recharge zones. Two new parameters, reactivity and exchangeability, determining the effectiveness of fluid components with respect to hydrothermal alteration are introduced.