Impacts into non-polar ice-rich paleodeposits on Mars: Excess ejecta craters, perched craters and pedestal craters as clues to Amazonian climate history

We compare three previously independently studied crater morphologies - excess ejecta craters, perched craters, and pedestal craters - each of which has been proposed to form from impacts into an ice-rich surface layer. Our analysis identifies the specific similarities and differences between the crater types; the commonalities provide significant evidence for a genetic relationship among the morphologies. We use new surveys of excess ejecta and perched craters in the southern hemisphere in conjunction with prior studies of all of the morphologies to create a comprehensive overview of their geographic distributions and physical characteristics. From these analyses, we conclude that excess ejecta craters and perched craters are likely to have formed from the same mechanism, with excess ejecta craters appearing fresh while perched craters have experienced post-impact modification and infilling. Impacts that led to these two morphologies overwhelmed the ice-rich layer, penetrating into the underlying martian regolith, resulting in the excavation of rock that formed the blocky ejecta necessary to armor the surface and preserve the ice-rich deposits. Pedestal craters, which tend to be smaller in diameter, have the same average deposit thickness as excess ejecta and perched craters, and form in the same geographic regions. They rarely have ejecta around their crater rims, instead exhibiting a smooth pedestal surface. We interpret this to mean that they form from impacts into the same type of ice-rich paleodeposit, but that they do not penetrate through the icy surface layer, and thus do not generate a blocky ejecta covering. Instead, a process related to the impact event appears to produce a thin, indurated surface lag deposit that serves to preserve the ice-rich material. These results provide a new basis to identify the presence of Amazonian non-polar ice-rich deposits, to map their distribution in space and time, and to assess Amazonian climate history. Specifically, the ages, distribution and physical attributes of the crater types suggest that tens to hundreds of meters of ice-rich material has been episodically emplaced at mid latitudes in both hemispheres throughout the Amazonian due to obliquity-driven climate variations. These deposits likely accumulated more frequently in the northern lowlands, resulting in a larger population of all three crater morphologies in the northern hemisphere.     

Groundwater discharge and gully formation on martian slopes

Young gullies and gully deposits on walls of martian craters have been cited as evidence that liquid water flowed on the surface of Mars relatively recently. Effects of variable environmental conditions at the surface of Mars are modeled and applied to the case of groundwater emergence from shallow aquifers to investigate whether groundwater is a viable source to enable the erosion of these gullies. The model includes detailed treatment of ice growth in the aquifer. Model results indicate that groundwater discharge can be maintained under the current environmental conditions if the aquifer permeability is like that of terrestrial gravel or higher, if the aquifer is 350 K or warmer, or if the aquifer is a brine with a freezing point depressed to 250 K or below. Groundwater discharge cannot be maintained for the conservative case of a cold, pure water, semi-pervious aquifer. Cold (275 K) pure water pervious (gravel) aquifers, warm (350 K) pure water semi-pervious aquifers, and cold (275 K) CaCl₂ brine semi-pervious aquifers all exhibit a dependence of discharge on season, latitude and slope orientation in our modeling. Seasonal, latitudinal and azimuthal discharge variations are strongest for cold CaCl₂ brine semi-pervious aquifers, with discharges from this aquifer type favoring equator-facing slopes at mid and high southern latitudes. At all latitudes and slope azimuths under our nominal conditions, the cold pure water pervious aquifer, the cold pure water semi-pervious aquifer and the cold CaCl₂ brine semi-pervious aquifer all freeze completely shortly after the simulations are started. Discharge restarts in the summer for the cold pure water pervious aquifer and the cold brine aquifer, but discharge does not restart for the cold pure water semi-pervious aquifer. The warm pure water semi-pervious aquifer maintains daily seeps throughout the year at all but high latitudes. In the case of the cold pure water pervious aquifer, approximately 500,000 m³ of water could be discharged from a mid-latitude, 150-m thick aquifer with a 20-m wide seepage face orientated towards the equator or the pole after a single undermining-induced event before ice growth seals the seepage face. For a brine semi-pervious aquifer with the same dimensions, 200-300 m³ of water could be released from a mid-latitude 20-m wide equator-facing seepage face before the fresh exposure is sealed for the fall and winter seasons. Our results do not rule out groundwater emergence as a means of creating some recent gullies, but they indicate that rather special and perhaps unusual conditions would be required.     

Erosional modification and gully formation at Meteor Crater, Arizona: Insights into crater degradation processes on Mars

Hydrogeological modification of Meteor Crater produced a spectacular set of gullies throughout the interior wall in response to rainwater precipitation, snow melting, and possible groundwater discharge. The crater wall has an exceptionally well-developed centripetal drainage pattern consisting of individual alcoves, channels, and fans. Some of the gullies originate from the rim crest and others from the middle crater wall where a lithologic transition occurs; broad gullies occur along the crater corner radial faults. Deeply incised alcoves are well developed on the soft Coconino Sandstone exposed on the middle crater wall, beneath overlying dolomite. In general, the gully locations are along crater wall radial fractures and faults, which are favorable locales of erosion due to preferential rock breakup from faulting, and groundwater flow/discharge; these structural discontinuities are also the locales where the surface runoff from rain precipitation and snow melting can preferentially flow, causing erosion and crater degradation. Channels are well developed on the talus deposits and alluvial fans on the periphery of the crater floor. Caves exposed on the lower crater level point to percolation of surface runoff and selective discharge through fractures on the crater wall. In addition, lake sediments on the crater floor provide significant evidence of a past pluvial climate, when the water table was higher, and groundwater may have seeped from springs on the crater wall. Although these hydrological processes continue at Meteor Crater today, conditions at the crater are much more arid than they were soon after impact, reflecting a climatic shift. This climate shift and the hydrological modifications observed at Meteor Crater provide insights for landscape sculpturing on Mars during various parts of its history.     

Possible liquid water origin for Atacama Desert mudflow and recent gully deposits on Mars

Evidence of recent gully activity on Mars has been reported based on the formation of new light toned deposits within the past decade, the origin of which remains controversial. Analogous recent light toned gully features have formed by liquid water activity in the Atacama Desert on Earth. These terrestrial deposits leave no mineralogical trace of water activity but rather show an albedo difference due to particle size sorting within a fine-grained mudflow. Therefore, spectral differences indicating varying mineralogy between a recent gully deposit and the surrounding terrain may not be the most relevant criteria for detecting water flow in arid environments. Instead, variation in particle size between the deposit and surrounding terrain is a possible discriminator to identify a water-based flow. We show that the Atacama deposit is similar to the observed Mars gully deposits, and both are consistent with liquid water activity. The light-toned Mars gully deposits could have formed from dry debris flows, but a liquid water origin cannot be ruled out because not all liquid water flows leave hydrated minerals behind on the surface. Therefore, the Mars deposits could be remnant mudflows that formed on Mars within the last decade.     

Investigating gully flow emplacement mechanisms using apex slopes

The origin of the martian gullies has been much debated since their discovery by the Mars Orbiter Camera (MOC, Malin, M.C., Edgett, K.S. [2000]. Science 288, 2330-2335). Several previous studies have looked at slope gradients in and around gullies, but none have used Digital Elevation Models (DEMs) from the High Resolution Imaging Science Experiment (HiRISE, McEwen, A.S., and 14 colleagues [2007]. J. Geophys. Res. 112 (E05), E0505S02), which has a pixel scale down to 25 cm/pixel. We use five 1 m/post HiRISE DEMs to measure gully apex slopes, the local channel gradient at the upslope extent of the gully debris apron, which marks a shift from erosion to deposition. The apex slope provides information about whether a flow was likely a typical dry granular flow (begins depositing on slopes ∼21°) or fluidized by some extra mechanism (depositing on shallower slopes). We find that 72% of the 75 gully fans studied were likely emplaced by fluidized flows. Relatively old gullies appear more likely to have hosted fluidized flows than relatively fresh gullies. This suggests a time and location dependent fluidizing agent, possibly liquid water produced in a different climate as previously proposed. Our results do not provide evidence for water-rich flows in gullies today.     

Evidence for debris flow gully formation initiated by shallow subsurface water on Mars

The morphologies of some martian gullies appear similar to terrestrial features associated with debris flow initiation, erosion, and deposition. On Earth, debris flows are often triggered by shallow subsurface throughflow of liquid water in slope-mantling colluvium. This flow causes increased levels of pore pressure and thus decreased shear strength, which can lead to slide failure of slope materials and subsequent debris flow. The threshold for pore pressure-induced failure creates a distinct relationship between the contributing area supplying the subsurface flow and the slope gradient. To provide initial tests of a similar debris flow initiation hypothesis for martian gullies, measurements of the contributing areas and slope gradients were made at the channel heads of martian gullies seen in three HiRISE stereo pairs. These gullies exhibit morphologies suggestive of debris flows such as leveed channels and lobate debris fans, and have well-defined channel heads and limited evidence for multiple flows. Our results show an area-slope relationship for these martian gullies that is consistent with that observed for terrestrial gullies formed by debris flow, supporting the hypothesis that these gullies formed as the result of saturation of near-surface regolith by a liquid. This model favors a source of liquid that is broadly distributed within the source area and shallow; we suggest that such liquid could be generated by melting of broadly distributed icy materials such as snow or permafrost. This interpretation is strengthened by observations of polygonal and mantled terrain in the study areas, which are both suggestive of near-surface ice.     

Constraints on the origin and evolution of the layered mound in Gale Crater, Mars using Mars Reconnaissance Orbiter data

Gale Crater contains a 5.2 km-high central mound of layered material that is largely sedimentary in origin and has been considered as a potential landing site for both the MER (Mars Exploration Rover) and MSL (Mars Science Laboratory) missions. We have analyzed recent data from Mars Reconnaissance Orbiter to help unravel the complex geologic history evidenced by these layered deposits and other landforms in the crater. Results from imaging data from the High Resolution Imaging Science Experiment (HiRISE) and Context Camera (CTX) confirm geomorphic evidence for fluvial activity and may indicate an early lacustrine phase. Analysis of spectral data from the CRISM (Compact Reconnaissance Imaging Spectrometer for Mars) instrument shows clay-bearing units interstratified with sulfate-bearing strata in the lower member of the layered mound, again indicative of aqueous activity. The formation age of the layered mound, derived from crater counts and superposition relationships, is ∼3.6-3.8 Ga and straddles the Noachian-Hesperian time-stratigraphic boundary. Thus Gale provides a unique opportunity to investigate global environmental change on Mars during a period of transition from an environment that favored phyllosilicate deposition to a later one that was dominated by sulfate formation.     

A lake in Uzboi Vallis and implications for Late Noachian-Early Hesperian climate on Mars

Uzboi Vallis (centered at ∼28°S, 323°E) is ∼400 km long and comprises the southernmost segment of the northward-draining Uzboi-Ladon-Morava (ULM) meso-scale outflow system that emerges from Argyre basin. Bond and Holden craters blocked the valley to the south and north, respectively, forming a Late Noachian-to-Hesperian paleolake basin that exceeded 4000 km³. Limited CRISM data suggest lake deposits in Uzboi and underlying basin floor incorporate relatively more Mg-clays and more Fe-clays, respectively. The short-lived lake overflowed and breached Holden crater’s rim at an elevation of −350 m and rapidly drained into the crater. Fan deltas in Holden extend 25 km from the breach and incorporate meter-sized blocks, and longitudinal grooves along the Uzboi basin floor are hundreds of meters long and average 60 m wide, suggesting high-discharge drainage of the lake. Precipitation-derived runoff rather than regional groundwater or overflow from Argyre dominated contributions to the Uzboi lake, although the failure of most tributaries to respond to a lowering of base level indicates their incision largely ended when the lake drained. The Uzboi lake may have coincided with alluvial and/or lacustrine activity in Holden, Eberswalde, and other craters in southern Margaritifer Terra, where fluvial/lacustrine activity may have required widespread, synoptic precipitation (rain or snow), perhaps associated with an ephemeral, global hydrologic system during the Late Noachian into the Hesperian on Mars.     

Possible impact melt and debris flows at Tooting Crater, Mars

Candidate examples of impact melt flows and debris flows have been identified at Tooting crater, an extremely young (<2 Myr), 29 km diameter impact crater in Amazonis Planitia, Mars. Using HiRISE and CTX images, and stereo-derived digital elevation models derived from these images, we have studied the rim and interior wall of Tooting crater to document the morphology and topography of several flow features in order to constrain the potential flow formation mechanisms. Four flow types have been identified; including possible impact melt sheets and three types of debris flows. The flow features are all located within 2 km of the rim crest on the southern rim or lie on the southern interior wall of the crater ∼1500 m below the rim crest. Extensive structural failure has modified the northern half of the crater inner wall and we interpret this to have resulted in the destruction of any impact melt emplaced, as well as volatile-rich wall rock. The impact melt flows are fractured on the meter to decameter scale, have ridged, leveed lobes and flow fronts, and cover an area >6 km × 5 km on the southern rim. The debris flows are found on both the inner wall and rim of the crater, are ∼1-2 km in length, and vary from a few tens of meters to >300 m in width. These flows exhibit varying morphologies, from a channelized, leveed flow with arcuate ridges in the channel, to a rubbly flow with a central channel but no obvious levees. The flows indicate that water existed within the target rocks at the time of crater formation, and that both melt and fluidized sediment was generated during this event.     

A cold and wet Mars

Water on Mars has been explained by invoking controversial and mutually exclusive solutions based on warming the atmosphere with greenhouse gases (the “warm and wet” Mars) or on local thermal energy sources acting in a global freezing climate (the “cold and dry” Mars). Both have critical limitations and none has been definitively accepted as a compelling explanation for the presence of liquid water on Mars. Here is considered the hypothesis that cold, saline and acidic liquid solutions have been stable on the sub-zero surface of Mars for relatively extended periods of time, completing a hydrogeological cycle in a water-enriched but cold planet. Computer simulations have been developed to analyze the evaporation processes of a hypothetical martian fluid with a composition resulting from the acid weathering of basalt. This model is based on orbiter- and lander-observed surface mineralogy of Mars, and is consistent with the sequence and time of deposition of the different mineralogical units. The hydrological cycle would have been active only in periods of dense atmosphere, as having a minimum atmospheric pressure is essential for water to flow, and relatively high temperatures (over ∼245 K) are required to trigger evaporation and snowfall; minor episodes of limited liquid water on the surface could have occurred at lower temperatures (over ∼225 K). During times with a thin atmosphere and even lesser temperatures (under ∼225 K), only transient liquid water can potentially exist on most of the martian surface. Assuming that surface temperatures have always been maintained below 273 K, Mars can be considered a “cold and wet” planet for a substantial part of its geological history.     

Outflow channel sources, reactivation, and chaos formation, Xanthe Terra, Mars

The undulating, warped, and densely fractured surfaces of highland regions east of Valles Marineris (located north of the eastern Aureum Chaos, east of the Hydraotes Chaos, and south of the Hydaspis Chaos) resulted from extensional surface warping related to ground subsidence, caused when pressurized water confined in subterranean caverns was released to the surface. Water emanations formed crater lakes and resulted in channeling episodes involved in the excavation of Ares, Tiu, and Simud Valles of the eastern part of the circum-Chryse outflow channel system. Progressive surface subsidence and associated reduction of the subsurface cavernous volume, and/or episodes of magmatic-driven activity, led to increases of the hydrostatic pressure, resulting in reactivation of both catastrophic and non-catastrophic outflow activity. Ancient cratered highland and basin materials that underwent large-scale subsidence grade into densely fractured terrains. Collapse of rock materials in these regions resulted in the formation of chaotic terrains, which occur in and near the headwaters of the eastern circum-Chryse outflow channels. The deepest chaotic terrain in the Hydaspis Chaos region resulted from the collapse of pre-existing outflow channel floors. The release of volatiles and related collapse may have included water emanations not necessarily linked to catastrophic outflow. Basal warming related to dike intrusions, thermokarst activity involving wet sediments and/or dissected ice-enriched country rock, permafrost exposed to the atmosphere by extensional tectonism and channel incision, and/or the injection of water into porous floor material, may have enhanced outflow channel floor instability and subsequent collapse. In addition to the possible genetic linkage to outflow channel development dating back to at least the Late Noachian, clear disruption of impact craters with pristine ejecta blankets and rims, as well as preservation of fine tectonic fabrics, suggest that plateau subsidence and chaos formation may have continued well into the Amazonian Period. The geologic and paleohydrologic histories presented here have important implications, as new mechanisms for outflow channel formation and other fluvial activity are described, and new reactivation mechanisms are proposed for the origin of chaotic terrain as contributors to flooding. Detailed geomorphic analysis indicates that subterranean caverns may have been exposed during chaos formation, and thus chaotic terrains mark prime locations for future geologic, hydrologic, and possible astrobiologic exploration.     

Bright dust devil tracks on Earth: Implications for their formation on Mars

We report on the first observations of bright dust devil tracks (BDDTs) on Earth, observed in the Turpan depression desert in northwestern China, where raindrop impacts on sand surfaces form aggregates of sand, silt and clay resulting in rough surface textures, which are destroyed by passages of dust devils leading to smooth surface textures within the tracks. The differences in photometric properties between the track and outside the tracks cause the albedo differences leading to the formation of BDDTs and similar processes might lead to BDDTs on Mars in areas with thick dust covers.     

Evidence for paleolakes in Erythraea Fossa, Mars: Implications for an ancient hydrological cycle

There is now widespread agreement that the surface of Mars underwent some degree of fluvial modification, but there is not yet full understanding of its surface hydrological cycle and the nature of standing bodies of water, rivers, and precipitation that affected its surface. In this paper we explore Erythraea Fossa (31.5 W, 27.3 S), a graben adjacent to Holden crater, which exhibits strong evidence that it once housed a chain of three lakes, had overland water flow, and was subject to precipitation. The inlet valley, outlet valley, and fan morphologies in the paleolakes are used to qualitatively discern the hydrologic history of the paleolakes; based on topography constraints, the three basins combined once held 56 km³ of water. Depositional features within the basins that change with drainage area and nearby valleys that start near drainage divides indicate that the paleolakes may have been fed by precipitation driven runoff. This suggests the presence of an atmosphere, at least locally, that was capable of supporting a hydrological cycle.     

Sorted clastic stripes, lobes and associated gullies in high-latitude craters on Mars: Landforms indicative of very recent, polycyclic ground-ice thaw and liquid flows

Self-organised patterns of stone stripes, polygons, circles and clastic solifluction lobes form by the sorting of clasts from fine-grained sediments in freeze-thaw cycles. We present new High Resolution Imaging Science Experiment (HiRISE) images of Mars which demonstrate that the slopes of high-latitude craters, including Heimdal crater - just 25 km east of the Phoenix Landing Site - are patterned by all of these landforms. The order of magnitude improvement in imaging data resolution afforded by HiRISE over previous datasets allows not only the reliable identification of these periglacial landforms but also shows that high-latitude fluviatile gullies both pre- and post-date periglacial patterned ground in several high-latitude settings on Mars. Because thaw is inherent to the sorting processes that create these periglacial landforms, and from the association of this landform assemblage with fluviatile gullies, we infer the action of liquid water in a fluvio-periglacial context. We conclude that these observations are evidence of the protracted, widespread action of thaw liquids on and within the martian regolith. Moreover, the size frequency statistics of superposed impact craters demonstrate that this freeze-thaw environment is, at least in Heimdal crater, less than a few million years old. Although the current martian climate does not favour prolonged thaw of water ice, observations of possible liquid droplets on the strut of the Phoenix Lander may imply significant freezing point depression of liquids sourced in the regolith, probably driven by the presence of perchlorates in the soil. Because perchlorates have eutectic temperatures below 240 K and can remain liquid at temperatures far below the freezing point of water we speculate that freeze-thaw involving perchlorate brines provides an alternative “low-temperature” hypothesis to the freeze-thaw of more pure water ice and might drive significant geomorphological work in some areas of Mars. Considering the proximity of Heimdal crater to the Phoenix Landing Site, the presence of such hydrated minerals might therefore explain the landforms described here. If this is the case then the geographical distribution of martian freeze-thaw landforms might reflect relatively high temperatures (but still below 273 K) and the locally elevated concentration of salts in the regolith.     

Dating martian climate change

Geological evidence indicates that low-latitude polygonally-patterned grounds on Mars, generally thought to be the product of flood volcanism, are periglacial in nature and record a complex signal of changing climate. By studying the martian surface stratigraphically (in terms of the geometrical relations between surface landforms and the substrate) rather than genetically (by form analogy with Earth), we have identified dynamic surfaces across one-fifth of martian longitude. New stratigraphical observations in the Elysium-Amazonis plains have revealed a progressive surface polygonisation that is destructive of impact craters across the region. This activity is comparable to the climatically-driven degradation of periglacial landscapes on Earth, but because it affects impact craters—the martian chronometer—it can be dated. Here, we show that it is possible to directly date this activity based on the fraction of impact craters affected by polygon formation. Nearly 100% of craters (of all diameters) are superposed by polygonal sculpture: considering the few-100 Ma age of the substrate, this suggests that the process of polygon formation was active within the last few million years. Surface polygonisation in this region, often considered to be one of the signs of young, ‘plains-forming’ volcanism on Mars, is instead shown to postdate the majority of impact craters seen. We therefore conclude that it is post-depositional in origin and an artefact of thermal cycling of near-surface ground ice. Stratigraphically-controlled crater counts present the first way of dating climate change on a planet other than Earth: a record that may tell us something about climate change on our own planet. Parallel climate change on these two worlds—an ice age Mars coincident with Earth’s glacial Quaternary period—might suggest a coupled system linking both. We have previously been unable to generalise about the causes of long-term climate change based on a single terrestrial example—with the beginnings of a chronology for climate change on our nearest planetary neighbour, we can.     

Sporadic formation of slope streaks on Mars

Slope streaks are a form of gravity-driven mass-movements that frequently occur on Mars today. The cause of slope streak formation remains unclear; both, dry and wet processes have been suggested. Here, we observationally constrain the time of the year during which slope streaks form. Imagery from four Mars-orbiting cameras is mined to identify locations that have been imaged repeatedly, and the overlapping images are surveyed for streak activity. A search algorithm automatically finds the locations on the surface that have been imaged most often based on a graph representation. Dark slope streaks are found to form sporadically throughout the Mars year. At one study site in the Olympus Mons Aureole, observations constrain slope streak formation to at least five distinct time intervals within a single Mars year. New slope streaks form spatially isolated or in small groups within a few kilometers of one another. The observations suggest that slope streak triggering is unrelated to season and not caused by any large regional events. Most slope streaks are caused by sporadic events of small spatial extent.     

Evaporation effects on the formation of martian gullies

In order to investigate the formation of martian gullies and the stability of fluids on Mars, we examined about 120 gully images. Twelve HiRISE images contained a sufficient number of Transverse Aeolian Ridges (TARs) associated with the gullies to make the following measurements: overall gully length, length of the alcove, channel and apron, and we also measured the frequency of nearby TARs. Six of the 12 images examined showed a statistically significant negative correlation between overall gully length (alcove, channel and apron length) and TAR frequency. Previous experimental work from our group has shown that at temperatures below ∼200 K, evaporation rate increases by about an order of magnitude as wind speed increases from 0 to ∼15 m/s. Thus the negative correlations we observe between gully length and dune frequency can be explained by formation at temperatures below ∼200 K where wind speed/evaporation is a factor governing gully length. In these cases evaporation of the fluid carving the gully was a constraint on their dimensions. Cases where there is no correlation between gully length and TAR frequency, can be explained by formation at temperatures >200 K. The temperatures are consistent with Global Circulation Model and Thermal Emission Spectrometer (TES) data for these latitudes. The temperatures suggested by these trends are consistent with the fluid responsible for gully formation being a strong brine, such as Fe₂(SO₄)₃ which has a eutectic temperature of ∼200 K. We also find that formation timescales for gullies are 10⁵-10⁶ years.     

Modeling the formation of bright slope deposits associated with gullies in Hale Crater, Mars: Implications for recent liquid water

Our study investigates possible formation mechanisms of the very recent bright gully deposits (BGDs) observed on Mars in order to assess if liquid water was required. We use two models in our assessment: a one-dimensional (1D) kinematic model to model dry granular flows and a two-dimensional (2D) fluid-dynamic model, FLO-2D (O’Brien et al., 1993, FLO Engineering), to model water-rich and wet sediment-rich flows. Our modeling utilizes a high-resolution topographic model generated from a pair of images acquired by the High Resolution Imaging Science Experiment (HiRISE) aboard the Mars Reconnaissance Orbiter. For the 1D kinematic modeling of dry granular flows, we examine a range of particle sizes, flow thicknesses, initial velocities, flow densities, and upslope initiation points to examine how these parameters affect the flow run-out distances of the center of mass of a flow. Our 1D modeling results show that multiple combinations of realistic parameters could produce dry granular flows that travel to within the observed deposits’ boundaries. We run the 2D fluid-dynamic model, FLO-2D, to model both water-rich and wet sediment-rich flows. We vary the inflow volume, inflow location, discharge rate, water-loss rate (water-rich models only), and simulation time and examine the resulting maximum flow depths and velocities. Our 2D modeling results suggest that both wet sediment-rich and water-rich flows could produce the observed bright deposits. Our modeling shows that the BGDs are not definitive evidence of recent liquid water on the surface of Mars.     

Constraints on mechanisms for the growth of gully alcoves in Gasa crater, Mars, from two-dimensional stability assessments of rock slopes

The value of slope stability analyses for gaining insight into the geologic conditions that would facilitate the growth of gully alcoves on Mars is demonstrated in Gasa crater. Two-dimensional limit equilibrium methods are used in conjunction with high-resolution topography derived from stereo High Resolution Imaging Science Experiment (HiRISE) imagery. These analyses reveal three conditions that may produce observed alcove morphologies through slope failure: (1) a ca. >10 m thick surface layer that is either saturated with H₂O ground ice or contains no groundwater/ice at all, above a zone of melting H₂O ice or groundwater and under dynamic loading (i.e., seismicity), (2) a 1-10 m thick surface layer that is saturated with either melting H₂O ice or groundwater and under dynamic loading, or (3) a >100 m thick surface layer that is saturated with either melting H₂O ice or groundwater and under static loading. This finding of three plausible scenarios for slope failure demonstrates how the triggering mechanisms and characteristics of future alcove growth would be affected by prevailing environmental conditions. HiRISE images also reveal normal faults and other fractures tangential to the crowns of some gully alcoves that are interpreted to be the result of slope instability, which may facilitate future slope movement. Stability analyses show that the most failure-prone slopes in this area are found in alcoves that are adjacent to crown fractures. Accordingly, crown fractures appear to be a useful indicator of those alcoves that should be monitored for future landslide activity.