The behaviour of an impermeable flexible raft on a deep layer of consolidating soil

Analytic solutions to the problem of the time-settlement behaviour of raft foundations have been limited in the past to flexible or rigid loadings, and have treated the foundation as being completely permeable. In this paper, solutions are presented for smooth circular rafts of any flexibility causing consolidation of a deep homogeneous clay layer, where the raft may be considered permeable or impermeable. Results for the time-dependent behaviour of contact stresses, pore pressures, raft displacements and moment in the raft are presented.     

For a Europe of flexible regions and not of region-states divided by ethnicity

Discussion of the future of Europe continues to be a marginal political issue, partly because of the resistance of states, on both the practical (bureaucratic) and conceptual levels, created by the government leaders and heads of state. In turn, the nation-states are challenged from within by independent and separatist movements that have laid bare the fundamental hypocrisy of rhetorical discussions of the principle regarding the self-determination of peoples; interfering with states (and their borders) has proven to be a taboo for Europe. The growing flexibility of the globalised economy should be paralleled by a growing flexibility in the conception of the division and political organisation of territory, but this is not the case. Further inflexibility stems from the socio-economic inequity that we accept in our daily lives as normal, in particular as regards inequality in the use and division of territory. Equality, or better egaliberté (equality and liberty), is a sufficiently dynamic and flexible concept to be taken as a point of reference in envisaging the society, Europe, and world of tomorrow. It is only through the concept of egaliberté that we can imagine a Europe based on relations between regions that are conceived and organised on multiple scales and not as region-nations conceived on the basis of ethnicity or in the name of supposed cultural homogeneity.     

For a Europe of flexible regions and not of region-states divided by ethnicity

Discussion of the future of Europe continues to be a marginal political issue, partly because of the resistance of states, on both the practical (bureaucratic) and conceptual levels, created by the government leaders and heads of state. In turn, the nation-states are challenged from within by independent and separatist movements that have laid bare the fundamental hypocrisy of rhetorical discussions of the principle regarding the self-determination of peoples; interfering with states (and their borders) has proven to be a taboo for Europe. The growing flexibility of the globalised economy should be paralleled by a growing flexibility in the conception of the division and political organisation of territory, but this is not the case. Further inflexibility stems from the socio-economic inequity that we accept in our daily lives as normal, in particular as regards inequality in the use and division of territory. Equality, or better egaliberté (equality and liberty), is a sufficiently dynamic and flexible concept to be taken as a point of reference in envisaging the society, Europe, and world of tomorrow. It is only through the concept of egaliberté that we can imagine a Europe based on relations between regions that are conceived and organised on multiple scales and not as region-nations conceived on the basis of ethnicity or in the name of supposed cultural homogeneity.     

利用α-β峰等信息判断金矿脉的剥蚀程度及找矿

采用改进的热声爆裂仪,测试河北省某金矿的石英,从中发掘出多种成矿找矿信息,主要有:     

Quartz precipitation and fluid inclusion characteristics in sub-seafloor hydrothermal systems associated with volcanogenic massive sulfide deposits

Results of a numerical modeling study of quartz dissolution and precipitation in a sub-seafloor hydrothermal system have been used to predict where in the system quartz could be deposited and potentially trap fluid inclusions. The spatial distribution of zones of quartz dissolution and precipitation is complex, owing to the fact that quartz solubility depends on many inter-related factors, including temperature, fluid salinity and fluid immiscibility, and is further complicated by the fact that quartz exhibits both prograde and retrograde solubility behavior, depending on the fluid temperature and salinity. Using the PVTX properties of H₂O-NaCl, the petrographic and microthermometric properties of fluid inclusions trapped at various locations within the hydrothermal system have been predicted. Vapor-rich inclusions are trapped as a result of the retrograde temperature-dependence of quartz solubility as the convecting fluid is heated in the vicinity of the magmatic heat source. Coexisting liquid-rich and vapor-rich inclusions are also trapped in this region when quartz precipitates as a result of fluid immiscibility that lowers the overall bulk quartz solubility in the system. Fluid inclusions trapped in the shallow subsurface near the seafloor vents and in the underlying stockwork are liquid-rich with homogenization temperatures of 200?C400°C and salinities close to that of seawater. Volcanogenic massive sulfide (VMS) deposits represent the uplifted and partially eroded remnants of fossil submarine hydrothermal systems, and the relationship between fluid-inclusion properties and location within the hydrothermal system described here can be used in exploration for VMS deposits to infer the direction towards potential massive sulfide ore.     

鄂东南付家山脉石英矿杂质特征及其用作高纯石英原料的潜力

作为战略性矿产资源之一,高纯石英已广泛应用于集成电路、半导体芯片、太阳能等高新技术产业中,但是能够生产高纯石英的原料矿床极为稀缺,我国尤为紧缺高纯石英原料矿。鄂东南地区是湖北省脉石英矿床的主要分布区。本文针对鄂东南付家山脉石英矿床,通过光学显微镜、扫描电子显微镜观察了脉石英的脉石矿物类型和包裹体特征,采用电感耦合等离子发射光谱法(ICP-OES)对原矿进行了微量元素分析,旨在获得付家山脉石英矿床的杂质元素特征,进而评价矿床用作高纯石英原料的潜力。结果表明,付家山脉石英矿石SiO₂含量大于99.95%,杂质元素主要为Al、K、Fe、Ti、Ca等,脉石矿物主要有白云母、钾长石、铁氧化物等,流体包裹体较为发育。杂质元素分析结果表明,付家山脉石英原矿质量达到低端高纯石英标准,经传统工艺提纯后,可能具有生产中高端高纯石英的潜力。     

http://www.sciencedirect.com/science/article/pii/S1674987114000395

The study of fluid inclusions in high-grade rocks is especially challenging as the host minerals have been normally subjected to deformation, recrystallization and fluid-rock interaction so that primary in- clusions, formed at the peak of metamorphism are rare. The larger part of the fluid inclusions found in metamorphic minerals is typically modified during uplift. These late processes may strongly disguise the characteristics of the ＂original＂ peak metamorphic fluid. A detailed microstructural analysis of the host minerals, notably quartz, is therefore indispensable for a proper interpretation of fluid inclusions. Cathodoluminescence （CL） techniques combined with trace element analysis of quartz （EPMA, LA- [CPMS） have shown to be very helpful in deciphering the rock-fluid evolution. Whereas high-grade metamorphic quartz may have relatively high contents of trace elements like Ti and A1, low- temperature re-equilibrated quartz typically shows reduced trace element concentrations. The result- ing microstructures in CL can be basically distinguished in diffusion patterns （along microfractures and grain boundaries）, and secondary quartz formed by dissolution-reprecipitation. Most of these textures are formed during retrograde fluid-controlled processes between ca. 220 and 500 ℃, i.e. the range of semi-brittle deformation （greenschist-facies） and can be correlated with the fluid inclusions. In this way modified and re-trapped fluids can be identified, even when there are no optical features observed under the microscope.     

微细浸染型金矿的硅质阴极发光与成矿物源分析——以黔西南和桂西北金矿为例

应用阴极发光技术研究了微细浸染型金矿中赋矿围岩和矿石中硅质以及成矿期和表生期石英脉的阴极发光特征。结果表明 :围岩(包括石英斑岩和辉绿岩墙)中的硅质和石英及次生硅化石英均表现不同的发光特征 ,而与原生矿化有关的原生硅化石英不发光 ;其中 ,氧化矿石中的硅化石英和表生梳状石英脉在阴极发光下呈棕色 ,与赋矿围岩中碎屑石英的次生溶解加大边表现的发光特征一致。这表明氧化和表生石英的硅质来源与溶解围岩和改造原生矿石有关 ,而原生硅化石英的硅质来源与围岩(包括岩浆岩)无关 ,进而表明成矿物质并非围岩提供。结合其它方面的系列研究 ,为该类型金矿属深源流体成矿作用产物的新观点 ,即成矿物质和流体可能直接来源于深部或上地幔提供了进一步的证据。这表明 ,阴极发光技术是一种简便、可靠和实用的矿床成因研究手段。     

ESR dating and the human evolution: contribution to the chronology of the earliest humans in Europe

In the last 20 years, the electron spin resonance (ESR) dating method has allowed the establishment of a chronological time frame over most of the history of human evolution. Despite many difficulties found for ESR dating of bones and carbonates, tooth enamel dated by ESR has been proven as a reliable method in its application to fossil teeth and quartz. Both of the latter materials have allowed dating of Early and Middle Pleistocene sites which are not datable using other methods such as the Argon–Argon method. In particular, recent discoveries of human remains in western Europe have been proposed to be sites of the earliest arrival of humans there, and have been dated to the Early Pleistocene by ESR using quartz and tooth enamel.Combined ESR and U-series dating of fossil herbivore teeth are the only means of dating layers from which such ancient remains have been recovered in western Europe. Good examples are the sites of Atapuerca Gran Dolina, Spain and Visogliano, Italy which have been dated using tooth enamel.When no bones and teeth can be found in prehistoric sites, ESR dating on quartz extracted from sediments has been used to date sites whose ages range over the entire Quaternary period. We present here two examples that occur in fluvial terraces of the river Creuse, France and at Monte Poggiolo site, Italy, where several artefacts of an archaic pebble industry have been recovered.     

Selective flocculation of hematite in the hematite-quartz-ferric ion-polyacrylic acid system. Part 1, activation and deactivation of quartz

This investigation has shown that quartz can be activated for polyacrylic acid adsorption by hydrolyzing metal cations, similar to activation in flotation. Detailed experiments on activation phenomena with ferric ions have been performed. The flocculation of activated quartz can be prevented by suitable additions of disodium EDTA, sodium hexametaphosphate or potassium fluoride. Selective flocculation of hematite with polyacrylic acid from a hematite/quartz mixture can be achieved in the pH range 3 to 9, but the process is not selective in the presence of ferric ions. Suitable additions of EDTA or KF are particularly successful in preventing quartz activation by ferric ions and the facilitating selective flocculation of hematite in artificial mixtures of quartz and hematite.     

Optically stimulated luminescence dating of fluvial deposits: a review

Optically Stimulated Luminescence (OSL) dating allows age determination of sediments deposited during the last glacial-interglacial cycle. This relatively new technique therefore enables chronological frameworks to be established for fluvial deposits that often cannot be dated by other means. The OSL signal of quartz and feldspar minerals is reset by light exposure during fluvial transport, and builds up as a result of ionizing radiation after burial of the minerals. Incomplete resetting of the OSL signal because of inadequate light exposure in the fluvial environment can result in age overestimations, especially for relatively young samples. Methods used for the detection of incomplete resetting, or poor bleaching, are reviewed. It is argued that technique s measuring the OSL signal from small subsamples (aliquots) are most promising for detecting poor bleaching and for obtaining the true age for a sample in which not all grains had their OSL signal completely removed at deposition. Quartz should be the mineral of choice, because it has been shown to yield the most reliable results and because its OSL signal is more rapidly reset than that of feldspar. Aliquot size should be small, with aliquots ideally consisting of a single grain of quartz for samples in which the majority of grains are poorly bleached. Using single-aliquot dating of coarse-grain quartz, age offsets between zero and a few thousand years have been found for modern fluvial deposits. The validity of single-aliquot quartz OSL dating has been demonstrated by application to known-age samples, but for the older age range (>˜13 ka) further proof of the accuracy of the method is essential. The application of quartz OSL dating to investigations of fluvial deposits opens a new realm of possibilities to be explored, as is highlighted by some examples of geological applications.     

Cathodoluminescence imaging and titanium thermometry in metamorphic quartz

Cathodoluminescence (CL) of quartz from metamorphic rocks representing a range of conditions from the garnet grade to the migmatite grade reveals a variety of textures, that is, a function of metamorphic grade and deformation history. Ti concentrations, determined by electron microprobe and ion microprobe, generally correlate with CL intensity (blue wavelengths), and application of the Ti‐in‐quartz thermometer (TitaniQ) reflects the temperature of quartz growth or recrystallization, and, in some settings, modification by diffusion. Quartz from garnet grade samples is not visibly zoned, records temperatures of 425–475 °C, and is interpreted to have recrystallized during fabric formation. Quartz grains from staurolite grade samples are zoned in CL with markedly darker cores and brighter rims, some of which are interpreted to have been produced by the dominant staurolite‐producing reaction, whereas others are interpreted as having formed by diffusion of Ti into quartz rims. Quartz from the matrix of kyanite and sillimanite grade samples are generally unzoned, although locally displays slightly brighter rims (higher Ti); quartz inclusions within garnet and staurolite have distinctly brighter rims, which are interpreted as having been produced by diffusive exchange with the host mineral. Quartz from migmatite grade samples displays highly variable CL intensity, which is dependent on the location of the grain. Matrix grains in melanosomes are largely unzoned or rarely zoned with darker cores. Leucosome quartz is strongly zoned with bright cores and dark rims and is interpreted as having formed during crystallization of the melt. Locally within the leucosome is observed oscillatory‐zoned quartz, which is interpreted as a subsolidus recrystallization to achieve strain relaxation. Quartz inclusions within garnet or plagioclase crystals often show bright domains separated by zones of dark CL. These enigmatic textures possibly reflect local melting fluxed by fluid inclusions. Temperatures calculated from the Ti–in–quartz thermometer are a function of the metamorphic grade of the sample, the textural setting of the quartz, the reaction history and the deformation history of the rock. The TitaniQ temperatures can be used to constrain the conditions at which various metamorphic processes have occurred.     

Implications of trace element composition of syntaxial quartz cements for the geochemical conditions during quartz precipitation in sandstones

A petrographic investigation revealed polyphase quartz cementation in the Finefrau Sandstone (Upper Carboniferous, Western Germany) and the Solling Sandstone (Lower Triassic, Central Germany). Three different cements could be distinguished in each sandstone based on their cathodoluminescence and trace element composition. The first quartz generation is suggested to have been formed during eogenesis due to dissolution and replacement of feldspar. The mesogenetic paragenesis comprises two generations of quartz and illite, which are accompanied by albite in the Solling Sandstone. Sharp luminescence zoning in quartz overgrowths points to distinct episodes of cementation in both sandstones. Significant amounts of Al, Li and H and traces of Ge and B have been detected in the quartz overgrowths. The Al‐content of the quartz cements in the Finefrau Sandstones exceeds that in the quartz cements in the Solling Sandstone by a factor of five. It is suggested that this compositional variation reflects the conditions in the pore‐water, such as temperature and pH. The Al‐concentration is generally correlated to the Li‐content with the exception of the latest quartz generation in the Finefrau Sandstones which is also most enriched in trace elements. The ratio of Li/Al varies between 0·11 and 0·25 in the two sandstones. The Li/H‐ratio, which ranges from 0·12 to 0·3, is controlled by the activity ratio of Li and H in the pore fluid. Clay minerals are the most important source for Li and high salinities favour the mobilization of Li during diagenesis. Thus, a relatively low salinity and low pH are responsible for the low Li/H‐ratio in the Finefrau Sandstone, while high salinity and neutral to alkaline pH results in a high Li/H‐ratio for the Solling Sandstone. The Ge‐contents are generally near the average of detrital quartz and indicate that pressure dissolution is a major source for quartz cementation. Different chemical compositions of distinct quartz generations indicate changes in the physico‐chemical conditions and point to mobilization of silica from different sources (for example, pressure solution and clay mineral transformations).     

The equilibration of high-angle grain boundaries in dynamically recrystallized quartz: the effect of crystallography and temperature

Dynamically recrystallized and sutured quartz grains from metamorphic rocks with different strain intensities and temperature conditions ranging from ca. 350°C to ca. 700°C have been studied. Universal-stage measurements on quartz–quartz high-angle grain boundaries show that they are never curved but always consist of straight segments which preferentially occupy specific crystallographic orientations in relation to both neighboring crystals. With increasing temperature the segments preferentially concentrate in a decreasing number of orientations, mainly near the rhombohedral {101̄1} planes. The crystallographic data and the observations on grain boundary geometries suggest that: (i) grain boundary orientations are strongly crystallographically controlled, (ii) this control is the main factor on the textural equilibration of quartz–quartz grain boundaries in metamorphic rocks, and (iii) grain boundaries from dynamically recrystallized quartz should be regarded as annealed and equilibrated fabrics that are stable against subsequent annealing as long as the material is not re-deformed.     

一种新的储层孔隙成因类型--石英溶解型次生孔隙

石英作为碎屑岩储层中的一种难溶组分,普遍认为它和次生孔隙的形成关系不十分密切。研究认为泌阳凹陷核桃园组储层中的碎屑石英颗粒存在明显的溶解现象,并形成以石英直接溶解型孔隙为主的储集空间特征。石英颗粒被溶解的部分在薄片中所占的范围为 2 %～ 7%者常见,高者达 8%以上,在总孔隙中所占的相对含量也多数在10 %～ 35 %之间,早成岩B期是其最主要形成期。石英溶解型次生孔隙的大量存在为碎屑岩储层中SiO₂ 胶结物及次生孔隙成因等问题的解释以及储层预测和评价提供了新的可能性。     

An internally consistent thermodynamic data set for phases of petrological interest

The thermodynamic properties of 154 mineral end-members, 13 silicate liquid end-members and 22 aqueous fluid species are presented in a revised and updated data set. The use of a temperature-dependent thermal expansion and bulk modulus, and the use of high-pressure equations of state for solids and fluids, allows calculation of mineral–fluid equilibria to 100  kbar pressure or higher. A pressure-dependent Landau model for order–disorder permits extension of disordering transitions to high pressures, and, in particular, allows the alpha–beta quartz transition to be handled more satisfactorily. Several melt end-members have been included to enable calculation of simple phase equilibria and as a first stage in developing melt mixing models in NCKFMASH. The simple aqueous species density model has been extended to enable speciation calculations and mineral solubility determination involving minerals and aqueous species at high temperatures and pressures. The data set has also been improved by incorporation of many new phase equilibrium constraints, calorimetric studies and new measurements of molar volume, thermal expansion and compressibility. This has led to a significant improvement in the level of agreement with the available experimental phase equilibria, and to greater flexibility in calculation of complex mineral equilibria. It is also shown that there is very good agreement between the data set and the most recent available calorimetric data.     

Chemical etching of deformation sub-structures in quartz

Chemical etching of dislocations has been studied in natural and synthetic quartz single crystals, in deformed synthetic quartz and in naturally and experimentally deformed quartzites. The ability of different etchants to produce polished or preferentially etched surfaces on quartz is described. Dislocation etching was achieved on all crystal planes examined by using a saturated solution of ammonium bifluoride as the etchant. Appropriate etching times were determined for etching quartzites for grain size, subgrain boundaries, deformation lamellae, dislocations and twins. Growth and polished surfaces of synthetic single crystal quartz were similarly etched and dislocation etch pits, characteristic of various orientations were found. The use of ammonium bifluoride proved to be expecially advantageous for the basal plane, producing a polished surface with etch pits, suitable for dislocation etch pit counting. “Double” etch pits have been found on Dauphiné twin boundaries on the basal plane and the first order prism, using this etchant. Slip lines and deformation bands were suitably etched on deformed synthetic crystal surfaces for identification of the slip planes. Other acidic etchants have been explored and their application to the study of deformation structures in quartz crystals is discussed.     

The influence of the characteristics of quartz and mineral deterioration on the strength of granitic dimensional stones

It is important to have a thorough knowledge of the petrographic characteristics of rocks to evaluate and understand their mechanical behavior. This paper deals with the influence of the texture and the mineral characteristics of nine Portuguese granites employed as dimensional stones. This study evaluates different mineral characteristics, such as mineral deterioration, grain size, quartz fissuration and the contacts between quartz and others mineral groups. The main differences in the studied granites were identified, clarifying the relationship between the petrographic characteristics. The consequences on their respective mechanical behavior were subsequently evaluated. The physical and textural characteristics of quartz in the studied granites have proven to be very important for understanding the behavior of granitic rocks under compressive stress. Uniaxial compressive strength values are not proportional to the quartz–feldspar ratio or quartz content and there is a tendency for strength to decrease with the increase in quartz. This could be related to the increase in quartz-quartz contacts and the decrease in the rock capacity for accommodating the deformation.     

电子背散射衍射技术(EBSD)在组构分析中的应用和相关问题

在过去的二十年里,EBSD (Electron Backscattered Diffraction),即电子背散射衍射测试技术,已广泛应用于韧性组构分析,成为变形运动学、流变学分析的常规手段。该方法主要应用于流变条件下矿物晶轴组构定向性分析,以判定流变剪切指向、对比应变强度、估算变形温度。理论上讲,EBSD法适用于所有矿物的全部晶轴定向的分析测试。然而鉴于天然变形的复杂性,笔者建议EBSD分析应以石英,特别是经历了动态重结晶的石英条带为组构分析的主要对象。长期以来,石英晶轴组构的不对称性被视作独立的剪切指向标志。然而,近年来基于天然变形和一般剪切实验的研究结果表明,塑性流变的剪切指向含义应为多重流变剪切指向标志综合判别比对的结果。尽管在提出之初,石英的轴组构开角被视作独立可靠的变形温度计(Kruhl,1998)。然而限于天然变形的复杂性,特别是对变质与变形阶段的对应、耦合的认识;尽管石英变形滑移系及石英晶轴组构开角可为动力变质温度提供重要的参考,但是石英晶轴组构开角并非独立的变形温度计。     

大别造山带北部变质花岗岩岩石谱系单位划分及特征

1：5万区调工作将原大别杂岩解体划分为变质表壳岩、变质超镁铁质岩、变质花岗岩三部分。变质花岗岩广泛分布于大别遣山带中。通过区内变质花岗岩的研究发现，成分上构成了闪长质(石英闪长质)一石英二长闪长质、石英二长质的演化趋势；结构上由细粒结构一中细粒结构一中细粒粗斑状结构一中细粒巨斑状结构的规律性变化。参照岩石谱系单位划分原则对其进行划分、归并。在空间上相伴生，具有同源岩浆演化特征，建立了岳西片麻岩套，并对其岩石学、岩石化学、地球化学特征作了阐述，确定其属岛弧环境的钙碱性岩石，为正确认识大别遣山带的早期构造演化提供了重要的地质依据。