Evidence for Palaeozoic magmatism recorded in the Late Neoproterozoic Marlborough ophiolite,New England Fold Belt,central Queensland

The ultramafic‐mafic complex in the Marlborough terrane of the northern New England Fold Belt is dominated by members of a Neoproterozoic (ca 560 Ma) ophiolite (V1). The ophiolite has been intruded by the products of three Palaeozoic tectonomagmatic episodes (V2, V3 and V4). The V2 magmatic episode is represented by tholeiitic and calc‐alkaline basalts and gabbros of island‐arc affinities. Sm/Nd isotopes give a whole‐rock isochron age of 380 ± 19 Ma (2σ) to this episode, some 180 million years younger than the V1 ophiolitic rocks. The V3 magmatic episode includes tholeiitic and alkali basalts with enriched geochemical signatures characteristic of intraplate volcanism. A whole‐rock Sm/Nd isochron age of 293 ± 35 Ma is obtained for this event. A fourth magmatic event (V4) is represented by basaltic andesites and siliceous intrusives with geochemical features similar to modern adakites. This event has its type locality in the Percy Isles. These data provide tectonic and geochronological constraints for the previously enigmatic Marlborough terrane and as such contribute to the ever‐evolving understanding of New England Fold Belt development.     

Structural fabric evidence for indentation tectonics in the Nambucca Block,southern New England Fold Belt,New South Wales

Structural studies of Lower Permian sequences exposed on wave‐cut platforms within the Nambucca Block, indicate that one to two ductile and two to three brittle — ductile/brittle events are recorded in the lower grade (sub‐greenschist facies) rocks; evidence for four, possibly five, ductile and at least three brittle — ductile/brittle events occurs in the higher grade (greenschist facies) rocks. Veins formed prior to the second ductile event are present in some outcrops. Further, the studies reveal a change in fold style from west‐southwest‐trending, open, south‐southeast‐verging, inclined folds (F₁ ⁰) at Grassy Head in the south, to east‐northeast‐trending, recumbent, isoclinal folds (F₁ ⁰; F₂ ⁰) at Nambucca Heads to the north, suggesting that strain increases towards the Coffs Harbour Block. A solution cleavage formed during D₁ in the lower grade rocks and cleavages defined by neocrystalline white mica developed during D₁ and D₂ in the higher grade rocks. South‐ to south‐southwest‐directed tectonic transport and north‐south shortening operated during these earlier events. Subsequently, north‐northeast‐trending, open, upright F₃ ² folds and inclined, northwest‐verging, northeast‐trending F₄ ² folds developed with poorly to moderately developed axial planar, crenulation cleavage (S₃ and S₄) formed by solution transfer processes. These folds formed heterogeneously in S₂ throughout the higher grade areas. Later northeast‐southwest shortening resulted in the formation of en échelon vein arrays and kink bands in both the lower and higher grade rocks. Shortening changed to east‐northeast‐west‐southwest during later north‐northeast to northeast, dextral, strike‐slip faulting and then to approximately northwest‐southeast during the formation of east‐southeast to southeast‐trending, strike‐slip faults. Cessation of faulting occurred prior to the emplacement of Triassic (229 Ma) granitoids. On a regional scale, S₁ trends east‐west and dips moderately to the north in areas unaffected by later events. S₂ has a similar trend to S₁ in less‐deformed areas, but is refolded about east‐west axes during D₃. S₃ is folded about east‐west axes in the highest grade, multiply deformed central part of the Nambucca Block. The deformation and regional metamorphism in the Nambucca Block is believed to be the result of indenter tectonics, whereby south‐directed movement of the Coffs Harbour Block during oroclinal bending, sequentially produced the east‐west‐trending structures. The effects of the Coffs Harbour Block were greatest during D₁ and D₂.     

Structure and metamorphism of the Calliope Volcanic Assemblage: Implications for middle to Late Devonian orogeny in the northern New England Fold Belt

The Late Silurian to Middle Devonian Calliope Volcanic Assemblage in the Rockhampton region is deformed into a set of northwest‐trending gently plunging folds with steep axial plane cleavage. Folds become tighter and cleavage intensifies towards the bounding Yarrol Fault to the east. These folds and associated cleavage also deformed Carboniferous and Permian rocks, and the age of this deformation is Middle to Late Permian (Hunter‐Bowen Orogeny). In the Stanage Bay area, both the Calliope Volcanic Assemblage and younger strata generally have one cleavage, although here it strikes north to northeast. This cleavage is also considered to be of Hunter‐Bowen age. Metamorphic grade in the Calliope Volcanic Assemblage ranges from prehnite‐pumpellyite to greenschist facies, with higher grades in the more strongly cleaved rocks. In the Rockhampton region the Calliope Volcanic Assemblage is part of a west‐vergent fold and thrust belt, the Yarrol Fault representing a major thrust within this system.

A Late Devonian unconformity followed minor folding of the Calliope Volcanic Assemblage, but no cleavage was formed. The unconformity does not represent a collision between an exotic island arc and continental Australia as previously suggested.     

Timing of emplacement and deformation of the Tia Granodiorite,southern New England Fold Belt,NSW: Implications for the metamorphic history

The Tia Granodiorite, a Hillgrove Suite pluton in the southern New England Fold Belt, intruded complexly deformed metasediment and metabasite belonging to the Tia Complex, which at the time of intrusion had already been affected by two deformation events at low‐T moderate‐P metamorphic conditions and two overprinting deformation events at high‐T low‐P metamorphic conditions. Emplacement took place during D₅ thrusting associated with limited uplift as low‐P amphibolite facies metamorphism prevailed. Large‐scale warping during D₆ was followed by a second penetrative thrusting event (D₇) that caused further uplift and was initiated under lower amphibolite facies conditions.

The granodiorite has been dated at ～ 300 Ma using magmatic zircon, an age which is thought to approximate the emplacement age and thus D₅. Biotite grains associated with D₇ uplift yield a Rb/Sr age of 264±1.3 Ma. D₅ and D₇ appear to have formed during one extended high‐T metamorphic event because intervening retrogression is lacking in spite of extensive hydrous fluxing, as indicated by numerous syn‐D₆ quartz veins. This thermal event coincided with the opening of the extensional Permian basins.     

Ophiolitic and metamorphic rocks in the Percy Isles and Shoalwater Bay region,New England Fold Belt,central Queensland

Ophiolitic and metamorphic rocks of the eastern part of the New England Fold Belt in the Shoalwater Bay region and the Percy Isles are grouped in the Marlborough and Shoalwater terranes, respectively. Marlborough terrane units occur on South Island (Percy Isles) and comprise the Northumberland Serpentinite, antigorite serpentinite with rodingite and more silicic dykes and mafic inclusions, the Chase Point Metabasalt, some 800+ metres of pillow lava, and the intervening South Island Shear Zone containing fault‐bounded slices of mafic and ultramafic igneous rocks, schist, and volcaniclastic sedimentary rocks, and zones of mélange. The Shoalwater terrane, an ancient subduction complex, consists of the Shoalwater Formation greenschist facies metamorphosed quartz sandstone and mudstone on North East Island and on the mainland at Arthur Point, the Townshend Formation, amphibolite‐grade quartzite, schist and metabasalt on Townshend Island, and the Broome Head Metamorphics on the western side of Shoalwater Bay, upper amphibolite facies quartz‐rich gneiss. With the exception of a sliver emplaced onto the western Yarrol terrane, possibly by gravity sliding, Shoalwater terrane rocks show the effects of Late Permian polyphase deformation. The Shacks Mylonite Zone along the northwest edge of the Broome Head Metamorphics marks a zone of oblique thrusting and is part of the major Stanage Fault Zone. The latter is a northeast‐striking oblique‐slip dextral tear fault active during Late Permian west‐directed thrusting that emplaced large ultramafic sheets farther south. Marlborough terrane rocks were emplaced along the Stanage Fault Zone, probably from the arc basement on which rocks of the Yarrol terrane were deposited. Structural trends and the distribution of rock units in the Shoalwater Bay‐Percy Isles region are oblique to the overall structural trend of the northern New England Fold Belt, probably due to the presence of a promontory in the convergent margin active in this region in Devonian and Carboniferous time.     

Accretion and post-accretion metamorphism in subduction complex terranes of the New England Fold Belt, eastern Australia

Abstract Regional metamorphic rocks that form Late Palaeozoic subduction complexes in central Queensland, Australia, are products of two metamorphic episodes. Synaccretion metamorphism (M1) gave rise to prehnite-pumpellyite and greenschist facies rocks, whereas a subsequent episode (M2) at about 250 Ma formed upper greenschist to upper amphibolite facies rocks of both intermediate- and low-pressure type, probably in a compressive arc or back-arc setting. A similar pattern can be recognized for 1000 km along the New England Fold Belt, although at several localities, where higher grade rocks are exposed, metamorphism was essentially continuous over the M1-M2 interval, with a rapid rise in geothermal gradient at the end of accretion. Where out-stepping of tectonic elements has occurred at long-lived convergent margins elsewhere, similar overprinting of high- by lower-pressure facies series is anticipated, complicating the tectonic interpretation of metamorphism. The discrete character of metamorphic events may be blurred where conditions giving rise to a major episode of accretion and out-stepping are followed by the subduction of a major heat source.     

Deformation history of the Hampden Synform in the Eastern Fold Belt of the Mt Isa terrane

The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L¹ ₀ intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.     

Monazite geochronology in central New England: evidence for a fundamental terrane boundary

Monazite crystallization ages have been measured in situ using SIMS and EMP analysis of samples from the Bronson Hill anticlinorium in central New England. In west‐central New Hampshire, each major tectonic unit (nappe) displays a distinctive P–T path and metamorphic history that requires significant post‐metamorphic faulting to place them in their current juxtaposition, and monazite ages were determined to constrain the timing of metamorphism and nappe assembly. Monazite ages from the low‐pressure, high‐temperature Fall Mountain nappe range from c. 455 to 355 Ma, and Y zoning indicates that these ages comprise three to four distinct age domains, similar to that found in the overlying Chesham Pond nappe. The underlying Skitchewaug nappe contains monazite ages that range from c. 417 to 307 Ma. ⁴⁰Ar/³⁹Ar ages indicate rapid cooling of the Chesham Pond and Fall Mountain nappes after 350 Ma, which is believed to represent the time of emplacement of the high‐level Chesham Pond and Fall Mountain nappes onto rocks of the underlying Skitchewaug nappe. Garnet zone rocks from western New Hampshire contain monazite that display a range of ages (c. 430–340 Ma). Both the metamorphic style and monazite ages suggest that the low‐grade belt in western New Hampshire is continuous with the Vermont sequence to the west. Rocks of the Big Staurolite nappe in western New Hampshire contain monazite that crystallized between c. 370 and 290 Ma and the same unit along strike in northern New Hampshire and central Connecticut records ages of c. 257–300 Ma. Conspicuously absent from this nappe are the older age populations that are found in both the overlying nappes and underlying garnet zone rocks. These monazite ages confirm that the metamorphism observed in the Big Staurolite nappe occurred significantly later than that in the units structurally above and below. These data support the hypothesis that the Big Staurolite nappe represents a major tectonic boundary, along which rocks of the New Hampshire metamorphic series were juxtaposed against rocks of the Vermont series during the Alleghanian.     

The geological development of the southern part of the New England Fold Belt

Two major divisions of the New England Fold Belt, Zone A and Zone B, are separated by the Peel Fault. Deposition in these two zones was probably contemporaneous (Lower Palaeozoic ‐ Lower Permian). Terminal orogenesis in both zones was also contemporaneous (Middle Permian) but whereas in Zone A deformation was only moderate, metamorphism was of burial type, and granitic emplacement was uncommon, in Zone B many rocks were severely deformed and regionally metamorphosed, and both syn‐tectonic and post‐tectonic granites are widespread.

Pre‐orogenic palaeogeography is envisaged in terms of an evolving volcanic chain ‐ fore‐chain basin ‐ trench system, with an outer non‐volcanic arc developed in the Carboniferous. Cessation of movement on a subduction zone dipping westward beneath the volcanic chain is believed to have caused the Middle Permian deformation, but neither metamorphism nor the granitic rocks are directly related to subduction.     

Carboniferous palaeomagnetism of the Rocky Creek Block,northern Tamworth Belt,and the New England pole path

Palaeomagnetic, rock magnetic and magnetic fabric results are presented for a Carboniferous (Visean to Westphalian) succession of felsic, mainly ignimbritic, volcanic and volcaniclastic rocks from the Rocky Creek Block of the northern Tamworth Belt, southern New England Orogen. Detailed thermal demagnetisation of 734 samples from 64 sites show three groups of magnetic components with low (<300°C), intermediate (300–600°C) and high (500–680°C) unblocking temperature ranges. Well‐defined primary magnetisations have been determined for 28 sites with evidence of four overprint phases. The overprints arise from a mid‐Tertiary weathering event (or possibly recent viscous origin), and from fluid movements associated with the Late Cretaceous opening of the Tasman Sea, thrusting during the Middle Triassic main phase of the Hunter‐Bowen Orogeny, and latest Carboniferous — Early Permian formation of the Bowen‐Gunnedah‐Sydney Basin system. Rock magnetic tests establish that the primary magnetisation carriers in the volcanic rocks are mainly magnetite (predominantly single domain, or pseudo‐single domain, and little or no multidomain) and hematite. Optimal magnetic cleaning is achieved at high to very high temperatures, with subtle, but systematic, directional and statistical differences between primary components derived from the mainly hematite fraction and pseudo‐components derived from the mainly magnetite fraction. The 28 primary magnetisation results are presented as six mean‐site results, summarised below and representing 25 sites, and three single‐site results. Fold tests could be applied to five mean‐site results. These are all positive, but one of these results may represent a secondary magnetisation. The primary magnetisation results define a Visean to Westphalian pole path. This long pole path indi cates extensive latitudinal and rotational movement for the Rocky Creek Block, and potentially for the New England Orogen, as follows: (i) Yuendoo Rhyolite Member (Caroda Formation, Visean) pole 235.8°E, 27.7°S, ED₉₅ = 9.0°, n = 3; (ii) Peri Rhyolite Member/Boomi Rhyolite Member (Clifden Formation, Namurian, 318.0 ± 3.4 Ma) pole 177.4°E, 63.4°S, ED₉₅ = 5.2°, n = 3; (iii) tuffaceous beds above Boomi Rhyolite Member (Clifden Formation?, Namurian) pole 162.2°E, 59.1°S, ED₉₅ = 10.2°, n = 3; ((iv) upper Clifden Formation/lower Rocky Creek Conglomerate (Namurian/Westphalian) pole 95.3°E, 49.6°S, ED₉₅ = 8.1°, n = 3 (possible overprint)); (v) Rocky Creek Conglomerate (Westphalian) pole 136.5°E, 57.6°S, ED₉₅ = 5.3°, n = 5; (vi) Lark Hill Formation (Westphalian) pole 127.0°E, 50.4°S, ED₉₅ = 4.8°, n = 8.     

Granite provinces and basement terranes in the Lachlan Fold Belt,southeastern Australia

Many granites have compositional features that directly reflect the composition of their source rocks. Since most granites come from the deeper parts of the Earth's crust, their study provides information about the nature of parts of that deep crust. Granites and related volcanic rocks are abundant and widely distributed in the Palaeozoic Lachlan Fold Belt of southeastern Australia. These granites show patterns of regional variation in which sharp discontinuities occur between provinces which internally are of a rather constant character. Such a discontinuity has long been recognized at the I‐S line and the extent of that line can now be defined more fully. Breaks of this type are thought to correspond to sharp changes in the composition of the deep crust that correspond to unexposed or basement terranes. Nine such basement terranes can be recognized in the Lachlan Fold Belt. The character of these basement terranes appears to be different from that of the terranes recognized in the Mesozoic‐Cainozoic Cordilleran fold belt, in which the plates accreted during the period of tectonism reflected in the exposed surface rocks. In the Lachlan Fold Belt, it is postulated that fragments of continental crust, or microplates, were assembled in the Late Proterozoic or Early Palaeozoic to form the substrate of the presently exposed Palaeozoic sedimentary rocks; the compositional features of these fragments were later redistributed vertically by magmatic processes. The identification of basement terranes of this type shows that models which involve the lateral growth of the Lachlan Fold Belt during the Palaeozoic, in a manner analogous to the accretion of younger belts, are untenable. These basement terranes have implications for mineral exploration because the content of heavy metals can vary from one to another and this would ultimately affect the probability of concentrating these metals to form a mineral deposit.     

Cyclic sedimentation in the Permian coal measures of New South Wales

Statistical analysis of borehole sections through the Illawarra and Newcastle Coal Measures of the Sydney Basin shows that cyclic sedimentation is present. The composite sequence for the Southern Coalfield (Illawarra Coal Measures) is (in ascending order): sandstone—sandstone/siltstone alternations—shale—coal, whereas that for the Newcastle Coalfield is: shale—sandstone/siltstone alternations—sandstone, often conglomeratic, or conglomerate—sandstone/siltstone alternations—shale —coal.

The environment of deposition is discussed. It is suggested that in the Southern Coalfield cyclicity is due to sedimentational processes inherent in the deltaic and alluvial conditions envisaged during Permian times. Periodic influxes of glacial meltwaters, although not essential, are not ruled out.

In the Newcastle Coalfield, however, the composite sequence does not match easily the ideal cycles expected in deltaic and/or alluvial regimes. Contemporary volcanism and tectonism complicated matters and lack of sedimentological details makes it impossible at present to give preference to any one mechanism of cycle formation.     

Middle to early Late Ordovician hydrothermal veining in the Molong Volcanic Belt,northeastern Lachlan Fold Belt: Sedimentological evidence

Detrital volcanic and vein quartz, accompanied by felsic volcanic debris, occur as minor constituents in the Ordovician subduction‐related mafic volcanics of the Molong Volcanic Belt. In the western province of the Molong Volcanic Belt, detrital quartz is present in the three episodes of the mafic Volcanics. Volcanic quartz occurs in allochthonous limestone blocks in the Bendigonian Hensleigh Siltstone overlying the Mitchell Formation. The second volcanic episode (the Fairbridge Volcanics) commenced after a hiatus of approximately 20 million years and lasted around 10 million years from Darriwilian to Gisbornian time. Locally derived vein quartz, volcanic quartz and felsic detritus are concentrated at the bases of autochthonous Wahringa and Yuranigh Limestone Members of the volcanics and are extensive and abundant in basal beds of the regional Eastonian limestone body that transgressed over an eroded volcanic centre at Cargo. This early Eastonian debris, deposited early in an 8 million‐year volcanic hiatus preceding the final Ordovician Bolindian volcanism, establishes a pre‐Eastonian age for mineralisation at Cargo. It is inferred that the pauses in volcanism were preceded by magmatic fractionation, intrusion and hydrothermal activity and followed by erosion, subsidence and deposition of autochthonous limestones. Minor occurrences of vein and volcanic quartz are found in Bolindian volcanogenic sediments of the third volcanic phase. It is concluded that hydrothermal vein formation (and mineralisation by inference) was associated with pauses in volcanic activity throughout the Middle to early Late Ordovician over a wide area in the western province, culminating in the mineralisation at Cargo and Copper Hill near Molong. Volcanism in the eastern province of the Molong Volcanic Belt was continuous from at least Darriwilian to latest Ordovician time. Here, detrital hydrothermal vein quartz and volcanic quartz and felsic detritus are distributed through late Middle and early Late Ordovician turbidites of the Weemalla Formation. The possible existence of cycles in the source area like those of the Fairbridge Volcanics is masked by the distal nature of these deposits. Vein formation occurred in both provinces from late Middle Ordovician to early Late Ordovician, long before the formation of the world‐class mineral deposit at Cadia associated with the latest Ordovician Cadia Monzonite.     

Superposed folding in the Rockley district,Lachlan Fold Belt,New South Wales

Low grade metasediments and metavolcanics of the Hill End Synclinorial Zone within the Rockley district, NSW have experienced two phases of macroscopic folding (D1 and D2), both of which are post‐latest Silurian in age. No hiatus is evident between D1 and D2. D1 produced large Fi folds (λ/2 usually > 2 km) lacking mesoscopic elements and having variable axial trends. D2 was associated with the development of regional slaty cleavage (S2) and mesoscopic folds which are parasitic on plunging macroscopic F2 folds (λ/2=0.4–2 km). D2 strain is variable, being most intense in the north of the district where slaty cleavage and tight mesoscopic F2 folds are well developed, and weakest in the south where mesoscopic folds are absent or usually gentle and cleavage is often feebly developed even in mica‐rich rocks, which are stratigraphic equivalents to slates and schists in the north. The F1 fold mechanism may involve multiple folding, simultaneous folding in more than one direction, or complex buckling of layers of variable thickness. D1 and D2 are tentatively correlated with folding events elsewhere in the Hill End Synclinorial Zone.     

Geology and geochronology of the Emu Creek Block (northern New South Wales,Australia) and implications for oroclinal bending in the New England Orogen

The southern part of the New England Orogen exhibits a series of remarkable orogenic bends (oroclines), which include the prominent Z-shaped Texas and Coffs Harbour oroclines. The oroclines are defined by the curvature of Devonian–Carboniferous forearc basin and accretionary complex rock units. However, for much of the interpreted length of the Texas Orocline, the forearc basin is mostly concealed by younger strata, and crops out only in the Emu Creek Block in the eastern limb of the orocline. The geology of the Emu Creek Block has hitherto been relatively poorly constrained and is addressed here by presenting new data, including a revised geological map, stratigraphic sections and new detrital zircon U–Pb ages. Rocks of the Emu Creek Block include shallow-marine and deltaic sedimentary successions, corresponding to the Emu Creek and Paddys Flat formations, respectively. New detrital zircon U–Pb data indicate that these formations were deposited during the late Carboniferous and that strata were derived from a magmatic source of Devonian to Carboniferous age. The sedimentary provenance and detrital zircon age distribution suggest that the sequence was deposited in a forearc basin setting. We propose that the Emu Creek and Paddys Flat formations are arc-distal, along-strike correlatives of the northern Tamworth Belt, which is part of the forearc basin in the western limb of the Texas Orocline. These results confirm the suggestion that Devonian–Carboniferous forearc basin rocks surround the Texas Orocline and have been subjected to oroclinal bending.     

Upper crustal structure of the Tamworth Belt,New South Wales: constraints from new gravity data

New gravity data along five profiles across the western side of the southern New England Fold Belt and the adjoining Gunnedah Basin show the Namoi Gravity High over the Tamworth Belt and the Meandarra Gravity Ridge over the Gunnedah Basin. Forward modelling of gravity anomalies, combined with previous geological mapping and a seismic-reflection transect acquired by Geoscience Australia, has led to iterative testing of models of the crustal structure of the southern New England Fold Belt, which indicates that the gravity anomalies can generally be explained using the densities of the presently exposed rock units. The Namoi Gravity High over the Tamworth Belt results from the high density of the rocks of this belt that reflects the mafic volcanic source of the older sedimentary rocks in the Tamworth Belt, the burial metamorphism of the pre-Permian units and the presence of some mafic volcanic units. Modelling shows that the Woolomin Association, present immediately east of the Peel Fault and constituting the most western part of the Tablelands Complex, also has a relatively high density of 2.72 – 2.75 t/m³, and this unit also contributes to the Namoi Gravity High. The Tamworth Belt can be modelled with a configuration where the Tablelands Complex has been thrust over the Tamworth Belt along the Peel Fault that dips steeply to the east. The Tamworth Belt is thrust westward over the Sydney – Gunnedah Basin for 15 – 30 km on the Mooki Fault, which has a shallow dip (～25°) to the east. The Meandarra Gravity Ridge in the Gunnedah Basin was modelled as a high-density volcanic rock unit with a density contrast of 0.25 t/m³ relative to the underlying rocks of the Lachlan Fold Belt. The modelled volcanic rock unit has a steep western margin, a gently tapering eastern margin and a thickness range of 4.5 – 6 km. These volcanic rocks are assumed to be Lower Permian and to be the western extension of the Permian Werrie Basalts that outcrop on the western edge of the Tamworth Belt and which have been argued to have formed in an extensional basin. Blind granitic plutons are inferred to occur near the Peel Fault along the central and the southern profiles.     

Geochemical evidence from Lower Permian volcanic rocks of northeast New South Wales for asthenospheric upwelling following slab breakoff

Within the Daly River basin, Northern Territory, three erosion surfaces are described and their relationships to deep weathering are discussed. The Bradshaw surface is the highest and oldest surface recognized. It is of considerable perfection and forms main divides; it is associated with a deep lateritic profile with a strongly silicified horizon forming the lower part of the pallid zone and extending into rocks immediately beneath. The Maranboy surface now forms secondary divides, with related rock‐cut terraces, below the level of the Bradshaw surface. In most areas it was produced by the stripping of the upper, less silicified parts of the Bradshaw pallid zone. The Maranboy surface is associated with a lateritic weathering profile less deep than the Bradshaw profile and mainly developed in the Bradshaw weathering mantle. A younger erosion surface, the Tipperary surface, advanced by the removal of the Maranboy re‐weathered layer exposing the resistant Bradshaw silicified rock which commonly forms a base‐level of denudation. The Tipperary surface consists of broad plains, gently undulating terrain, and dissected headwater valley floors. It is relatively unweathered and carries depositional mantles which are attributed to climatically induced slope instability.

The ages of the erosion surfaces and the possibility of climatic changes in the area are also briefly discussed.     

Geochemical discrimination of tectonic setting for Devonian basalts of the Yarrol Province of the New England Orogen,central coastal Queensland: An empirical approach *

Fault blocks and inliers of uppermost Silurian to Middle Devonian strata in the Yarrol Province of central coastal Queensland have been interpreted either as island-arc deposits or as a continental-margin sequence. They can be grouped into four assemblages with different age ranges, stratigraphic successions, geophysical signatures, basalt geochemistry, and coral faunas. Basalt compositions from the Middle Devonian Capella Creek Group at Mt Morgan are remarkably similar to analyses from the modern Kermadec Arc, and are most consistent with an intra-oceanic arc associated with a backarc basin. They cannot be matched with basalts from any modern continental arc, including those with a thin crust (Southern Volcanic Zone of the Andes) or those built on recently accreted juvenile oceanic terranes (Eastern Volcanic Front of Kamchatka). Analyses from the other assemblages also suggest island-arc settings, although some backarc basin basalt compositions could be present. Arguments for a continental-margin setting based on structure, provenance, and palaeogeography are not conclusive, and none excludes an oceanic setting for the uppermost Silurian to Middle Devonian rocks. The Mt Morgan gold–copper orebody is associated with a felsic volcanic centre like those of the modern Izu–Bonin Arc, and may have formed within a submarine caldera. The data are most consistent with formation of the Capella Creek Group as an intra-oceanic arc related to an east-dipping subduction zone, with outboard assemblages to the east representing remnant arc or backarc basin sequences. Collision of these exotic terranes with the continent probably coincided with the Middle–Upper Devonian unconformity at Mt Morgan. An Upper Devonian overlap sequence indicates that all four assemblages had reached essentially their present relative positions early in Late Devonian time. Apart from a small number of samples with compositions typical of spreading backarc basins, Upper Devonian basalts and basaltic andesites of the Lochenbar and Mt Hoopbound Formations and the Three Moon Conglomerate are most like tholeiitic or transitional suites from evolved oceanic arcs such as the Lesser Antilles, Marianas, Vanuatu, and the Aleutians. However, they also match some samples from the Eastern Volcanic Front of Kamchatka. Their rare-earth and high field strength element patterns are also remarkably similar to Upper Devonian island arc tholeiites in the ophiolitic Marlborough terrane, supporting a subduction-related origin and a lack of involvement of continental crust in their genesis. Modern basalts from rifted backarc basins do not match the Yarrol Province rocks as well as those from evolved oceanic arcs, and commonly have consistently higher MgO contents at equivalent levels of rare-earth and high field strength elements. One of the most significant points for any tectonic model is that the Upper Devonian basalts become more arc-like from east to west, with all samples that can be matched most readily with backarc basin basalts located along the eastern edge of the outcrop belt. It is difficult to account for all geochemical variations in the Upper Devonian basalts of the Yarrol Province by any simplistic tectonic model using either a west-dipping or an east-dipping subduction zone. On a regional scale, the Upper Devonian rocks represent a transitional phase in the change from an intra-oceanic setting, epitomised by the Middle Devonian Capella Creek Group, to a continental margin setting in the northern New England Orogen in the Carboniferous, but the tectonic evolution must have been more complex than any of the models published to date. Certainly there are many similarities to the southern New England Orogen, where basalt geochemistry indicates rifting of an intra-oceanic arc in Middle to Late Devonian time.     

Silurian to mid-Devonian basin development of the Melbourne Zone, Lachlan Fold Belt, southeastern Australia

The Melbourne Zone comprises Early Ordovician to Early Devonian marine turbidites, which pass conformably upward into a mid-Devonian fluviatile succession. There are four pulses of Silurian to mid-Devonian deep-marine sandstone-dominated sedimentation: Early Silurian (late Llandovery), Late Silurian (Ludlow), earliest Devonian (Lochkovian) and late Early Devonian (Emsian). Two dispersal patterns have been defined using more than 1100 palaeocurrent measurements, mainly from sole marks and cross-laminations in graded beds, together with sandstone compositions. The older pattern, of Silurian to earliest Devonian age, contains the lowest three sandstone pulses. Palaeocurrents and provenance define a wedge of southwesterly derived sediment, of largely cratonic provenance, thinning eastward. This older dispersal pattern is part of an Early Ordovician to earliest Devonian east-facing passive continental margin succession. Palaeocurrents and provenance in the Emsian sandstone pulse comprise three patterns: (1) west- to southwesterly directed palaeocurrents associated with fine- to coarse-grained, locally conglomeratic, lithic sandstones containing a high proportion of volcanic detritus; (2) east- to northeasterly directed palaeocurrents associated with fine- to medium-grained quartz-lithic sandstones; (3) north- to northwesterly and south- to southeasterly directed palaeocurrents associated with fine- to medium-grained sandstones of variable lithic composition. The palaeocurrent and provenance pattern defines a NNW-elongate basin with a tectonically active eastern margin, and is similar to the coeval Mathinna basin of northeastern Tasmania. Both basins are part of the same system of wrench basins, which developed along the western side of the Wagga–Omeo Metamorphic Belt during the earliest Devonian to Middle Devonian. The change in tectonic setting in the earliest Devonian appears to have occurred during an interval of significant dextral translation of the eastern Lachlan Fold Belt towards the SSE along the Governor and associated fault zones.     

Evidence for Early Miocene wrench faulting in the Marlborough Fault System,New Zealand: structural implications

Abstract

In New Zealand, the Marlborough strike-slip faults link the Hikurangi subduction zone to the Alpine fault collision zone. Stratigraphic and structural analysis in the Marlborough region constrain the inception of the current strike-slip tectonics.

Six major Neogene basins are investigated. Their infill is composed of marine and freshwater sediments up to 3 km thick; they are characterised by coarse facies derived from the basins bounding relief, high sedimentation rates and asymmetric geometries. Proposed factors that controlled the basins generation are the initial geometry of the strike-slip faults and the progressive strike-slip motion. Two groups of basins are presented: the early Miocene (23 My) basins were generated under wrench tectonics above releasing-jogs between basement faults. The late Miocene (11 My) basins were initiated by halfgrabens tilted along straighter faults during a transtensive stage. Development of faults during Cretaceous to Oligocene times facilitated the following propagation of wrench tectonics. The Pliocene (5 My) to current increasing convergence has shortened the basins and distorted the Miocene array of faults. This study indicates that the Marlborough Fault System is an old feature that connected part of the Hikurangi margin to the Alpine fault since the subduction and collision initiation. © Elsevier, Paris