Variable hangingwall palaeotransport during Silurian and Devonian thrusting in the western Lachlan Fold Belt: Missing gold lodes,synchronous Melbourne Trough sedimentation and Grampians Group fold interference

The western margin of the Lachlan Fold Belt contains early ductile and brittle structures that formed during northeast‐southwest and east‐west compression, followed by reactivation related to sinistral wrenching. At Stawell all of these structural features (and the associated gold lodes) are dismembered by a complex array of later northwest‐, north‐ and northeast‐dipping faults. Detailed underground structural analysis has identified northwest‐trending mid‐Devonian thrusts (Tabberabberan) that post‐date Early Devonian plutonism and have a top‐to‐the‐southwest transport. Deformation associated with the initial stages of dismemberment occurred along an earlier array of faults that trend southwest‐northeast (or east‐west) and dip to the northwest (or north). The initial transport of the units in the hangingwall of these fault structures was top‐to‐the‐southeast. ‘Missing’ gold lodes were discovered beneath the Magdala orebody by reconstructing a displacement history that involved a combination of transport vectors (top‐to‐the‐southeast and top‐to‐the‐southwest). Fold interference structures in the adjacent Silurian Grampians Group provide further evidence for at least two almost orthogonal shortening regimes, post the mid‐Silurian. Overprinting relationships, and correlation with synchronous sedimentation in the Melbourne Trough, indicates that the early fault structures are mid‐ to late‐Silurian in age (Ludlow: ca 420–414 Ma). These atypical southeast‐vergent structures have regional extent and separate significant northeast‐southwest shortening that occurred in the mid‐Devonian (‘Tabberabberan orogeny’) and Late Ordovician (‘Benambran orogeny’).     

Evolution of a reworked orogenic zone: The boundary between the delamerian and lachlan fold belts,southeastern Australia *

⁴⁰Ar/³⁹Ar age data from the boundary between the Delamerian and Lachlan Fold Belts identify the Moornambool Metamorphic Complex as a Cambrian metamorphic belt in the western Stawell Zone of the Palaeozoic Tasmanide System of southeastern Australia. A reworked orogenic zone exists between the Lachlan and Delamerian Fold Belts that contains the eastern section of the Cambrian Delamerian Fold Belt and the western limit of orogenesis associated with the formation of an Ordovician to Silurian accretionary wedge (Lachlan Fold Belt). Delamerian thrusting is craton-verging and occurred at the same time as the final consolidation of Gondwana. ⁴⁰Ar/³⁹Ar age data indicate rapid cooling of the Moornambool Metamorphic Complex at about 500 Ma at a rate of 20 – 30°C per million years, temporally associated with calc-alkaline volcanism followed by clastic sedimentation. Extension in the overriding plate of a subduction zone is interpreted to have exhumed the metamorphic rocks within the Moornambool Metamorphic Complex. The Delamerian system varies from a high geothermal gradient with syntectonic plutonism in the west to lower geothermal gradients in the east (no syntectonic plutonism). This metamorphic zonation is consistent with a west-dipping subduction zone. Contrary to some previous models involving a reversal in subduction polarity, the Ross and Delamerian systems of Antarctica and Australia are inferred to reflect deformation processes associated with a Cambrian subduction zone that dipped towards the Gondwana supercontinent. Western Lachlan Fold Belt orogenesis occurred about 40 million years after the Delamerian Orogeny and deformed older, colder, and denser oceanic crust, with metamorphism indicative of a low geothermal gradient. This orogenesis closed a marginal ocean basin by west-directed underthrusting of oceanic crust that produced an accretionary wedge with west-dipping faults that verge away from the major craton. The western Lachlan Fold Belt was not associated with arc-related volcanism and plutonism occurred 40 – 60 million years after initial deformation. The revised orogenic boundaries have implications for the location of world-class 440 Ma orogenic gold deposits. The structural complexity of the 440 Ma Stawell gold deposit reflects its location in a reworked part of the Cambrian Delamerian Fold Belt, while the structurally simpler 440 Ma Bendigo deposit is hosted by younger Ordovician turbidites solely deformed by Lachlan orogenesis.     

Plate-driven extension and convergence along the East Gondwana active margin: Late Silurian–Middle Devonian tectonics of the Lachlan Fold Belt,southeastern Australia

The Lachlan Fold Belt of southeastern Australia developed along the Panthalassan margin of East Gondwana. Major silicic igneous activity and active tectonics with extensional, strike-slip and contractional deformation have been related to a continental backarc setting with a convergent margin to the east. In the Early Silurian (Benambran Orogeny), tectonic development was controlled by one or more subduction zones involved in collision and accretion of the Ordovician Macquarie Arc. Thermal instability in the Late Silurian to Middle Devonian interval was promoted by the presence of one or more shallow subducted slabs in the upper mantle and resulted in widespread silicic igneous activity. Extension dominated the Late Silurian in New South Wales and parts of eastern Victoria and led to formation of several sedimentary basins. Alternating episodes of contraction and extension, along with dispersed strike-slip faulting particularly in eastern Victoria, occurred in the Early Devonian culminating in the Middle Devonian contractional Tabberabberan Orogeny. Contractional deformation in modern systems, such as the central Andes, is driven by advance of the overriding plate, with highest strain developed at locations distant from plate edges. In the Ordovician to Early Devonian, it is inferred that East Gondwana was advancing towards Panthalassa. Extensional activity in the Lachlan backarc, although minor in comparison with backarc basins in the western Pacific Ocean, was driven by limited but continuous rollback of the subduction hinge. Alternation of contraction and extension reflects the delicate balance between plate motions with rollback being overtaken by advance of the upper plate intermittently in the Early to Middle Devonian resulting in contractional deformation in an otherwise dominantly extensional regime. A modern system that shows comparable behaviour is East Asia where rollback is considered responsible for widespread sedimentary basin development and basin inversion reflects advance of blocks driven by compression related to the Indian collision.     

Petrological,geochemical and geochronological evidence for a Neoproterozoic ocean basin recorded in the Marlborough terrane of the northern New England Fold Belt

Petrological, geochemical and radiogenic isotopic data on ophiolitic‐type rocks from the Marlborough terrane, the largest (～700 km²) ultramafic‐mafic rock association in eastern Australia, argue strongly for a sea‐floor spreading centre origin. Chromium spinel from partially serpentinised mantle harzburgite record average Cr/(Cr + Al) = 0.4 with associated mafic rocks displaying depleted MORB‐like trace‐element characteristics. A Sm/Nd isochron defined by whole‐rock mafic samples yields a crystallisation age of 562 ± 22 Ma (2σ). These rocks are thus amongst the oldest rocks so far identified in the New England Fold Belt and suggest the presence of a late Neoproterozoic ocean basin to the east of the Tasman Line. The next oldest ultramafic rock association dated from the New England Fold Belt is ca530 Ma and is interpreted as backarc in origin. These data suggest that the New England Fold Belt may have developed on oceanic crust, following an oceanward migration of the subduction zone at ca540 Ma as recorded by deformation and metamorphism in the Anakie Inlier. Fragments of late Neoproterozoic oceanic lithosphere were accreted during progressive cratonisation of the east Australian margin.     

Evolution of the southeastern Lachlan Fold Belt in Victoria

The Benambra Terrane of southeastern Australia is the eastern, allochthonous portion of the Lachlan Fold Belt with a distinctive Early Silurian to Early Devonian history. Its magmatic, metamorphic, structural, tectonic and stratigraphic histories are different from the adjacent, autochthonous Whitelaw Terrane and record prolonged orogen‐parallel dextral displacement. Unlike the Whitelaw Terrane, parts of the proto‐Benambra Terrane were affected by extensive Early Silurian plutonism associated with high T/low P metamorphism. The orogen‐parallel movement (north‐south) is in addition to a stronger component of east‐west contraction. Three main orogenic pulses deformed the Victorian portion of the terrane. The earliest, the Benambran Orogeny, was the major cratonisation event in the Lachlan Fold Belt and caused amalgamation of the components that comprise the Benambra Terrane. It produced faults, tight folding and strong cleavage with both east‐west and north‐south components of compression. The Bindian (= Bowning) Orogeny, not seen in the Whitelaw Terrane, was the main period of southward tectonic transport in the Benambra Terrane. It was characterised by the development of large strike‐slip faults that controlled the distribution of second‐generation cleavage, acted as conduits for syntectonic granites and controlled the deformation of Upper Silurian sequences. Strike‐slip and thrust faults form complex linked systems that show kinematic indicators consistent with overall southward tectonic transport. A large transform fault is inferred to have accommodated approximately 600 km of dextral strike‐slip displacement between the Whitelaw and Benambra Terranes. The Benambran and Bindian Orogenies were each followed by periods of extension during which small to large basins formed and were filled by thick sequences of volcanics and sediments, partly or wholly marine. Some of the extension appears to have occurred along pre‐existing fractures. Silurian basins were inverted during the Bindian Orogeny and Early Devonian basins by the Tabberabberan Orogeny. In the Melbourne Zone, just west of the Benambra Terrane, sedimentation patterns in this interval, in particular the complete absence of material derived from the deforming Benambra Terrane, indicate that the two terranes were not juxtaposed until just before the Tabberabberan Orogeny. This orogeny marked the end of orogen‐parallel movement and brought about the amalgamation of the Whitelaw and Benambra Terranes along the Governor Fault. Upper Devonian continental sediments and volcanics form a cover sequence to the terranes and their structural zones and show that no significant rejuvenation of older structures occurred after the Middle Devonian.     

40Ar/39Ar and K–Ar age constraints on the timing of regional deformation,south coast of New South Wales,Lachlan Fold Belt: Problems and implications

Four slate samples from subduction complex rocks exposed on the south coast of New South Wales, south of Batemans Bay, were analysed by K–Ar and ⁴⁰Ar/³⁹Ar step‐heating methods. One sample contains relatively abundant detrital muscovite flakes that are locally oblique to the regional cleavage in the rock, whereas the remaining samples appear to contain sparse detrital muscovite. Separates of detrital muscovite yielded plateau ages of 505 ± 3 Ma and 513 ± 3 Ma indicating that inheritance has not been eliminated by metamorphism and recrystallisation. Step‐heating analyses of whole‐rock chips from all four slate samples produced discordant apparent age spectra with ‘saddle shapes’ following young apparent ages at the lowest temperature increments. Elevated apparent ages associated with the highest temperature steps are attributed to the presence of variable quantities of detrital muscovite (<1–5%). Two whole‐rock slate samples yielded similar ⁴⁰Ar/³⁹Ar integrated ages of ca 455 Ma, which are some 15–30 million years older than K–Ar ages for the same samples. These discrepancies suggest that the slates have also been affected by recoil loss/redistribution of ³⁹Ar, leading to anomalously old ⁴⁰Ar/³⁹Ar ages. Two other samples, from slaty tectonic mélange and intensely cleaved slate, yielded average ⁴⁰Ar/³⁹Ar integrated ages of ca 424 Ma, which are closer to associated mean K–Ar ages of 423 ± 4 Ma and 409 ± 16 Ma, respectively. Taking into account the potential influences of recoil loss/redistribution of ³⁹Ar and inheritance, the results from the latter samples suggest a maximum age of ca 440 Ma for deformation/metamorphism. The current results indicate that recoil and inheritance problems may also have affected whole‐rock ⁴⁰Ar/³⁹Ar data reported from other regions of the Lachlan Fold Belt. Therefore, until these effects are adequately quantified, models for the evolution of the Lachlan Fold Belt, that are based on such whole‐rock ⁴⁰Ar/³⁹Ar data, should be treated with caution.     

Emplacement and deformation of the Wyangala Batholith,New South Wales

The Wyangala Batholith, in the Lachlan Fold Belt of New South Wales, is pre‐tectonic with respect to the deformation that caused the foliation in the granite, and was emplaced during a major thermal event, perhaps associated with dextral shearing, during the Late Silurian to Early Devonian Bowning Orogeny. This followed the first episode of folding in the enclosing Ordovician country rocks. Intrusion was facilitated by upward displacement of fault blocks, with local stoping. Weak magmatic flow fabrics are present. After crystallization of the granite, a swarm of mafic dykes intruded both the granite and country rock, possibly being derived from the same tectonic regime responsible for emplacement of the Wyangala Batholith. A contact aureole surrounding the granite contains cordierite‐biotite and cordierite‐andalusite assemblages. Slaty cleavage produced in the first deformation was largely obliterated by recrystallization in the contact aureole.

Postdating granite emplacement and basic dyke intrusion, a second regional deformation was accompanied by regional metamorphism ranging from lower greenschist to albite‐epidote‐amphibolite facies, and produced tectonic foliations, termed S and C, in the granite, and a foliation, S₂, in the country rocks. Contact metamorphic rocks underwent retrogressive regional metamorphism at this time. S formed under east‐west shortening and vertical extension, concurrently with S₂. C surfaces probably formed concurrently with S and indicate reverse fault motion on west‐dipping ductile shear surfaces. The second deformation may be related to Devonian or Early Carboniferous movement on the Copperhannia Thrust east of the Wyangala Batholith.     

Timing of gold mineralisation in the Ballarat goldfields,central Victoria: Constraints from 40Ar/39Ar results

⁴⁰Ar/³⁹Ar data for muscovite separates and hydrothermally altered whole‐rock samples from the Ballarat West and the Ballarat East goldfields indicate that mesothermal gold mineralisation at Ballarat occurred during several episodic pulses, ranging in age from the Late Ordovician to the Early Devonian. Initial formation of auriferous structures in the Ballarat goldfields coincided with folding and thrusting associated with the development of the western Lachlan Fold Belt between 460 and 440 Ma. Subsequent fault reactivation and magmatism resulted in remobilisation and additional mineralisation between 410 and 380 Ma, and around 370 Ma. The results presented herein are in agreement with findings for other major gold deposits in central Victoria and further constrain the history of deformation, metamorphism and mineralisation in the western subprovince of the Lachlan Fold Belt.     

Episodic Late Palaeozoic to Cenozoic denudation of the southeastern highlands of Australia: Evidence from the Bogong High Plains,Victoria

The Bogong High Plains of eastern Victoria occur as plateau remnants in a highly dissected region of the Australian Alps. Results from apatite fission track analyses indicate that the Bogong region experienced multiple episodes of rapid low‐temperature cooling, most of which can be tentatively linked to a tectonic cause. Early episodes of cooling occurred during the Middle to Late Devonian (ca 400–370 Ma) and Late Carboniferous to Early Permian (ca 310–290 Ma), presumably during different stages of deformation associated with the development of the Lachlan Fold Belt and glacial erosion. Rapid cooling occurred during the Late Permian to Early Triassic (ca 260–240 Ma), presumably in response to the Hunter‐Bowen orogenic event along the eastern Australian continental margin. Since the Triassic, two major episodes of fault reactivation have further displaced fission track ages between sample groups on different structural blocks. The first episode occurred during the middle Cretaceous at ca 110–90 Ma, probably in response to initial extension and denudation along the eastern Australian passive margin prior to breakup. Subsequently during the Early to mid‐Tertiary at ca 65–45 Ma, large‐scale fault reactivation occurred along the Kiewa Fault, possibly in response to changes in intraplate stresses which occurred during the middle Tertiary.     

A newly defined Late Ordovician magmatic‐thermal event in the Mt Painter Province,northern Flinders Ranges,South Australia

Magmatism,metamorphism and metasomatism in the Palaeoproterozoic‐Mesoproterozoic Mt Painter Inlier and overlying Neoproterozoic Adelaidean rocks in the northern Flinders Ranges (South Australia) have previously been interpreted as resulting from the ca 500 Ma Delamerian Orogeny. New Rb–Sr, Sm–Nd and U–Pb data, as well as structural analysis,indicate that the area also experienced a second thermal event in the Late Ordovician (ca 440 Ma). The Delamerian Orogeny resulted in large‐scale folding, prograde metamorphism and minor magmatic activity in the form of a small volume of pegmatites and leucogranites. The Late Ordovician event produced larger volumes of granite (the British Empire Granite in the core of the inlier) and these show Nd isotopic evidence for a mantle component. The high‐temperature stage of this magmatic‐hydrothermal event also gave rise to unusual diopside‐titanite veins and the primary uranium mineralisation in the basement, of which the remobilisation was younger than 3.5 Ma. It is possible that parts of the Mt Gee quartz‐hematite epithermal system developed during the waning stages of the Late Ordovician event. We suggest that the Ordovician hydrothermal system was also the cause of the commonly observed retrogression of Delamerian metamorphic minerals (cordierite, andalusite) and the widespread development of actinolite, scapolite, tremolite and magnetite in the cover sequences. Deformation during the Late Ordovician was brittle. The recognition of the Late Ordovician magmatic‐hydrothermal event in the Mt Painter Province might help to link the tectonic evolution of central Australia and the southeast Australian Lachlan Fold Belt.     

A comparative U–Th–Pb (zircon–monazite) and 40Ar–39Ar (muscovite–biotite) study of shear zones in northern Victoria Land (Antarctica): implications for geochronology and localized reworking of the Ross Orogen

Mylonitic granites from two shear zones in northern Victoria Land (Antarctica) were investigated in order to examine the behaviour of the U–Th–Pb system in zircon and monazite and of the ⁴⁰Ar–³⁹Ar system in micas during ductile deformation. Meso‐ and micro‐structural data indicate that shear zones gently dip to the NE and SW, have an opposite sense of shear (top‐to‐the‐SW and ‐NE, respectively) and developed under upper greenschist facies conditions. In situ U–Pb dating by laser‐ablation inductively coupled plasma‐mass spectrometry of zircon areas with well‐preserved igneous zoning patterns (c. 490 Ma) confirm that granites were emplaced during the Early Cambrian to Early Ordovician Ross–Delamerian Orogeny. Monazite from the Bier Point Shear Zone (BPSZ) mainly yielded U–Th–Pb ages of c. 440 Ma, in agreement with in‐situ Ar laserprobe ages of syn‐shear muscovite and with most Ar ages of coexisting biotite. The agreement of ages derived from different decay schemes and from minerals with different crystal‐chemical features suggests that isotope transport in the studied sample was mainly controlled by (re)crystallization processes and that the main episode of ductile deformation in the BPSZ occurred at c. 440 Ma. Cathodoluminscence imaging showed that zircon from the BPSZ contains decomposed areas with faint relics of oscillatory zoning. These areas yielded a U–Pb age pattern which mimics that of monazite but is slightly shifted towards older ages, supporting previous studies which suggest that ‘ghost’ structures may be affected by inheritance. In contrast, secondary structures in zircon from the Mt. Emison Shear Zone (MESZ) predominantly consist of overgrowths or totally recrystallized areas and gave U–Pb ages of c. 450 and 410 Ma. The c. 450‐Ma date matches within errors most monazite U–Th–Pb ages and in‐situ Ar ages on biotite aligned along the mylonitic foliation. This again suggests that isotope ages from the different minerals are (re)crystallization ages and constrains the time of shearing in the MESZ to the Late Ordovician. Regionally, results indicate that shear zones were active in the Late Ordovician–Early Silurian and that their development was partially synchronous at c. 440 Ma, suggesting that they belong to a shear‐zone system formed in response to ～NE–SW‐directed shortening. Taking into account the former juxtaposition of northern Victoria Land and SE Australia, we propose that shear zones represent reactivated zones formed in response to stress applied along the new plate margin as a consequence of contractional tectonics associated with the early stages (Benambran Orogeny) of the development of the Late Ordovician–Late Devonian Lachlan Fold Belt.     

Metallogeny and tectonic development of the Tasman Fold Belt System in New South Wales

The northwestern corner of New South Wales consists of the paratectonic Late Proterozoic to Early Cambrian Adelaide Fold Belt and older rocks, which represent basement inliers in this fold belt. The rest of the state is built by the composite Late Proterozoic to Triassic Tasman Fold Belt System or Tasmanides.In New South Wales the Tasman Fold Belt System includes three fold belts: (1) the Late Proterozoic to Early Palaeozoic Kanmantoo Fold Belt; (2) the Early to Middle Palaeozoic Lachlan Fold Belt; and (3) the Early Palaeozoic to Triassic New England Fold Belt. The Late Palaeozoic to Triassic Sydney—Bowen Basin represents the foredeep of the New England Fold Belt.The Tasmanides developed in an active plate margin setting through the interaction of East Gondwanaland with the Ur-(Precambrian) and Palaeo-Pacific plates. The Tasmanides are characterized by a polyphase terrane accretion history: during the Late Proterozoic to Triassic the Tasmanides experienced three major episodes of terrane dispersal (Late Proterozoic—Cambrian, Silurian—Devonian, and Late Carboniferous—Permian) and six terrane accretionary events (Cambrian—Ordovician, Late Ordovician—Early Silurian, Middle Devonian, Carboniferous, Middle-Late Permian, and Triassic). The individual fold belts resulted from one or more accretionary events.The Kanmantoo Fold Belt has a very restricted range of mineralization and is characterized by stratabound copper deposits, whereas the Lachlan and New England Fold Belts have a great variety of metallogenic environments associated with both accretionary and dispersive tectonic episodes.The earliest deposits in the Lachlan Fold Belt are stratabound Cu and Mn deposits of Cambro-Ordovician age. In the Ordovician Cu deposits were formed in a volcanic are. In the Silurian porphyry Cu---Au deposits were formed during the late stages of development of the same volcanic are. Post-accretionary porphyry Cu---Au deposits were emplaced in the Early Devonian on the sites of the accreted volcanic arc. In the Middle to Late Silurian and Early Devonian a large number of base metal deposits originated as a result of rifting and felsic volcanism. In the Silurian and Early Devonian numerous Sn---W, Mo and base metal—Au granitoid related deposits were formed. A younger group of Mo---W and Sn deposits resulted from Early—Middle Carboniferous granitic plutonism in the eastern part of the Lachlan Fold Belt. In the Middle Devonian epithermal Au was associated with rifting and bimodal volcanism in the extreme eastern part of the Lachlan Fold Belt.In the New England Fold Belt pre-accretionary deposits comprise stratabound Cu and Mn deposits (pre-Early Devonian): stratabound Cu and Mn and ?exhalite Au deposits (Late Devonian to Early Carboniferous); and stratabound Cu, exhalite Au, and quartz—magnetite (?Late Carboniferous). S-type magmatism in the Late Carboniferous—Early Permian was responsible for vein Sn and possibly Au---As---Ag---Sb deposits. Volcanogenic base metals, when compared with the Lachlan Fold Belt, are only poorly represented, and were formed in the Early Permian. The metallogenesis of the New England Fold Belt is dominated by granitoid-related mineralization of Middle Permian to Triassic age, including Sn---W, Mo---W, and Au---Ag---As Sb deposits. Also in the Middle Permian epithermal Au---Ag mineralization was developed. During the above period of post-orogenic magmatism sizeable metahydrothermal Sb---Au(---W) and Au deposits were emplaced in major fracture and shear zones in central and eastern New England. The occurrence of antimony provides an additional distinguishing factor between the New England and Lachlan Fold Belts. In the New England Fold Belt antimony deposits are abundant whereas they are rare in the Lachlan Fold Belt. This may suggest fundamental crustal differences.     

Ordovician and Silurian lithofacies and base‐metal deposits of the Lachlan Fold Belt

Two lithofacies maps of the Lachlan Fold Belt, one for the Ordovician and one for the Silurian, are illustrated. Both maps indicate shorelines in western New South Wales, Victoria and Tasmania.

The Ordovicoan map suggests open‐sea conditions eastwards from the shoreline with one major and two minor andesitic volcanoes (or volcanic centres). The Silurian map suggests segmentation of the Lachlan Fold Belt into the Melbourne Basin, Omeo Land, Newell Basin, and Budawang Land. The Newell Basin displays a nearshore (Louth‐Mitta Mitta) coarse clastics facies and an offshore (Wellington‐Cooma) platform carbonate facies. Acid volcanism was widespread over the Newell Basin in Silurian time, but did not occur in the Melbourne Basin.

The Louth‐Mitta Mitta and Wellington‐Cooma facies boundary coincides with the position of the Coolac‐Honeybugle Serpentine Belt and the outcrop area of the Girilambone Beds, suggesting that these features were already in some way prominent during the Silurian Period: the Serpentine Belt may have been a fault, and the Girilambone Beds may have been land.

The origin of base‐metal deposits in the Silurian rocks is thought to be somehow related to the heat generated in the subsurface during Silurian time as is indicated by the volcanism and granite intrusion; and also to the fact that the deposits occur in a transgressive sequence which contains the first phase of acid volcanism in the known geological history of the Lachlan Fold Belt.     

Basement geology of the southern Thomson Orogen

Abstract

The diverse geological and geophysical data sets compiled, interrogated and interpreted for the largely undercover southern Thomson Orogen region reveal a Paleozoic terrane dominated by deformed metasedimentary rocks intruded by S- and I-type granites. An interpretive basement geology map and synthesis of geochronological constraints allow definition of several stratigraphic packages. The oldest and most widespread comprises upper Cambrian to Lower Ordovician metasedimentary rocks deposited during the vast extensional Larapinta Event with maximum depositional ages of ca 520 to ca 496 Ma. These units correlate with elements of the northern Thomson Orogen, Warburton Basin and Amadeus Basin. The degree of deformation and metamorphism of these rocks varies across the region. A second major package includes Lower to Middle Devonian volcanic and sedimentary units, some of which correlate with components of the Lachlan Orogen. The region also includes a Middle to Upper Ordovician package of metasedimentary rocks and a Devonian or younger package of intermediate volcaniclastic rocks of restricted extent. Intrusive units range from diatremes and relatively small layered mafic bodies to batholithic-scale suites of granite and granodiorite. S-type and I-type intrusions are both present, and ages range from Ordovician to Triassic, but late Silurian intrusions are the most abundant. Two broad belts of intrusions are recognised. In the east, the Scalby Belt comprises relatively young (Upper Devonian) intrusions, while in the west, the Ella Belt is dominated by intrusions of late Silurian age within a curvilinear, broadly east–west trend. The stratigraphic distributions, characteristics and constraints defined by this interpretive basement mapping provide a basic framework for ongoing research and mineral exploration.     

The relationship of structures across the Lambian unconformity near Taralga,New South Wales

The structures across the Lambian Unconformity near Taralga show evidence of two, and possibly three, significant episodes of folding. The first, Early to Middle Silurian folding is poorly defined, but may be responsible for initial dips that are reflected in the more complex deformation patterns in the Late Ordovician than in the overlying younger rocks. The second, mid‐Devonian folding produced upright folds trending 10° west of north, and the last, latest Devonian to Early Carboniferous folding produced the meridional Cookbundoon Synclinorium and the regional cleavage. No cleavage was associated with the first two episodes of folding in the area studied. The angular discordance across the Lambian Unconformity caused by mid‐Devonian folding is much greater than in the northeastern Lachlan Fold Belt, and reflects the increasing intensity of mid‐Devonian folding southward. The tight, slightly overturned profile of the Cookbundoon Synclinorium reflects an intensity of latest Devonian to Early Carboniferous folding similar to that found in the northeastern Lachlan Fold Belt, but the intensity of this folding decreases further south.     

Thick‐skinned folding in the eastern Lachlan Fold Belt,Shoalhaven River Gorge,New South Wales

In the Shoalhaven River Gorge, in the eastern Lachlan Fold Belt, the Ordovician quartz‐turbidite succession (Adaminaby Group) is affected by one major phase of deformation with northerly trending, gently plunging, upright, close to tight folds (F₁) characterised by a range in half wavelengths up to 3 km. Several anticlinoria and synclinoria are developed and folds occur in at least four orders; these characteristics are consistent with buckling occurring at several scales and are controlled by the thickness of competent units in the multilayered succession. F₁ folding is thick‐skinned in style with the whole crust probably having been affected by deformation. D₁ occurred during the Silurian to Middle Devonian interval and was associated with crustal thickening and the shallowing of depositional environments over time. Locally, F₁ is overprinted by south‐southeast‐trending, steeply to moderately inclined F₂ that reorients F₁ to recumbent attitudes. D₂ is of Early to Middle Carboniferous age. Both deformations are related to convergence in an intra‐arc to backarc region and occurred inboard of a subduction zone, remnants of which occur in the New England Fold Belt.     

Evolution of a Cambrian active continental margin: The Delamerian–Lachlan connection in southeastern Australia from a zircon perspective

The Early Palaeozoic Ross–Delamerian orogenic belt is considered to have formed as an active margin facing the palaeo-Pacific Ocean with some island arc collisions, as in Tasmania (Australia) and Northern Victoria Land (Antarctica), followed by terminal deformation and cessation of active convergence. On the Cambrian eastern margin of Australia adjacent to the Delamerian Fold Belt, island arc and backarc basin crust was formed and is now preserved in the Lachlan Fold Belt and is consistent with a spatial link between the Delamerian and Lachlan orogens. The Delamerian–Lachlan connection is tested with new zircon data. Metamorphic zircons from a basic eclogite sample from the Franklin Metamorphic Complex in the Tyennan region of central Tasmania have rare earth element signatures showing that eclogite metamorphism occurred at ~ 510 Ma, consistent with island arc–passive margin collision during the Delamerian(− Tyennan) Orogeny. U–Pb ages of detrital zircons have been determined from two samples of Ordovician sandstones in the Lachlan Fold Belt at Melville Point (south coast of New South Wales) and the Howqua River (western Tabberabbera Zone of eastern Victoria). These rocks were chosen because they are the first major clastic influx at the base of the Ordovician ‘Bengal-fan’ scale turbidite pile. The samples show the same prominent peaks as previously found elsewhere (600–500 Ma Pacific-Gondwana and the 1300–1000 Ma Grenville–Gondwana signatures) reflecting supercontinent formation. We highlight the presence of ~ 500 Ma non-rounded, simple zircons indicating clastic input most likely from igneous rocks formed during the Delamerian and Ross Orogenies. We consider that the most probable source of the Ordovician turbidites was in East Antarctica adjacent to the Ross Orogen rather than reflecting long distance transport from the Transgondwanan Supermountain (i.e. East African Orogen). Together with other provenance indicators such as detrital mica ages, this is a confirmation of the Delamerian–Lachlan connection.     

Isotopic constraints on crustal architecture and Permo‐Triassic tectonics in New Guinea: Possible links with eastern Australia

New U–Pb zircon ages and Sr–Nd isotopic data for Triassic igneous and metamorphic rocks from northern New Guinea help constrain models of the evolution of Australia's northern and eastern margin. These data provide further evidence for an Early to Late Triassic volcanic arc in northern New Guinea, interpreted to have been part of a continuous magmatic belt along the Gondwana margin, through South America, Antarctica, New Zealand, the New England Fold Belt, New Guinea and into southeast Asia. The Early to Late Triassic volcanic arc in northern New Guinea intrudes high‐grade metamorphic rocks probably resulting from Late Permian to Early Triassic (ca 260–240 Ma) orogenesis, as recorded in the New England Fold Belt. Late Triassic magmatism in New Guinea (ca 220 Ma) is related to coeval extension and rifting as a precursor to Jurassic breakup of the Gondwana margin. In general, mantle‐like Sr–Nd isotopic compositions of mafic Palaeozoic to Tertiary granitoids appear to rule out the presence of a North Australian‐type Proterozoic basement under the New Guinea Mobile Belt. Parts of northern New Guinea may have a continental or transitional basement whereas adjacent areas are underlain by oceanic crust. It is proposed that the post‐breakup margin comprised promontories of extended Proterozoic‐Palaeozoic continental crust separated by embayments of oceanic crust, analogous to Australia's North West Shelf. Inferred movement to the south of an accretionary prism through the Triassic is consistent with subduction to the south‐southwest beneath northeast Australia generating arc‐related magmatism in New Guinea and the New England Fold Belt.     

Crustal structure of the Ordovician Macquarie Arc,Eastern Lachlan Orogen,based on seismic‐reflection profiling

In the Eastern Lachlan Orogen, the mineralised Molong and Junee‐Narromine Volcanic Belts are two structural belts that once formed part of the Ordovician Macquarie Arc, but are now separated by younger Silurian‐Devonian strata as well as by Ordovician quartz‐rich turbidites. Interpretation of deep seismic reflection and refraction data across and along these belts provides answers to some of the key questions in understanding the evolution of the Eastern Lachlan Orogen—the relationship between coeval Ordovician volcanics and quartz‐rich turbidites, and the relationship between separate belts of Ordovician volcanics and the intervening strata. In particular, the data provide evidence for major thrust juxtaposition of the arc rocks and Ordovician quartz‐rich turbidites, with Wagga Belt rocks thrust eastward over the arc rocks of the Junee‐Narromine Volcanic Belt, and the Adaminaby Group thrust north over arc rocks in the southern part of the Molong Volcanic Belt. The seismic data also provide evidence for regional contraction, especially for crustal‐scale deformation in the western part of the Junee‐Narromine Volcanic Belt. The data further suggest that this belt and the Ordovician quartz‐rich turbidites to the east (Kirribilli Formation) were together thrust over ?Cambrian‐Ordovician rocks of the Jindalee Group and associated rocks along west‐dipping inferred faults that belong to a set that characterises the middle crust of the Eastern Lachlan Orogen. The Macquarie Arc was subsequently rifted apart in the Silurian‐Devonian, with Ordovician volcanics preserved under the younger troughs and shelves (e.g. Hill End Trough). The Molong Volcanic Belt, in particular, was reworked by major down‐to‐the‐east normal faults that were thrust‐reactivated with younger‐on‐older geometries in the late Early ‐ Middle Devonian and again in the Carboniferous.     

Late Ordovician stratigraphy,zircon provenance and tectonics,Lachlan Fold Belt,southeastern Australia

Ordovician quartz turbidites of the Lachlan Fold Belt in southeastern Australia accumulated in a marginal sea and overlapped an adjoining island arc (Molong volcanic province) developed adjacent to eastern Gondwana. The turbidite succession in the Shoalhaven River Gorge, in the southern highlands of New South Wales, has abundant outcrop and graptolite sites. The succession consists of, from the base up, a unit of mainly thick‐bedded turbidites (undifferentiated Adaminaby Group), a unit with conspicuous bedded chert (Numeralla Chert), a unit with common thin‐bedded turbidites (Bumballa Formation (new name)) and a unit of black shale (Warbisco Shale). Coarse to very coarse sandstone in the Bumballa Formation is rich in quartz and similar to sandstone in the undifferentiated Adaminaby Group. Detrital zircons from sandstone in the Bumballa Formation, and from sandstone at a similar stratigraphic level from the upper Adaminaby Group of the Genoa River area in eastern Victoria, include grains as young as 453–473 Ma, slightly older than the stratigraphic ages.The dominant detrital ages are in the interval 500–700 Ma (Pacific Gondwana component) with a lessor concentration of Grenville ages (1000–1300 Ma). This pattern resembles other Ordovician sandstones from the Lachlan Fold Belt and also occurs in Triassic sandstones and Quaternary sands from eastern Australia. The Upper Ordovician succession is predominantly fine grained, which reflects reduced clastic inputs from the source in the Middle Cambrian to earliest Ordovician Ross‐Delamerian Fold Belts that developed along the eastern active margin of Gondwana. Development of subduction zones in the Late Ordovician marginal sea are considered to be mainly responsible for the diversion of sediment and the resulting reduction in the supply of terrigenous sand to the island arc and eastern part of the marginal sea.