Sulphur and sulphate-oxygen isotopes and the origin of the silvermines deposits,Ireland

New sulphur and sulphate-oxygen isotope measurements for the main discordant and stratiform lead-zinc-barite orebodies at Silvermines Co. Tipperary, allow reappraisal of previously offered differing interpretations (Graham, 1970; Greig et al., 1971) of the bearing of sulphur isotopes on the genesis of this important Irish deposit. The following aspects of the data are confirmed: barite ³⁴ S-values range from 17–21, similar to lower Carboniferous seawater sulphate: stratiform sulphide lens pyrites have ³⁴ S-values ranging from –13 to –36; vein sulphide ³⁴ S-values range from –8 to 4; sulphide ³⁴ S-values increase upwards and outwards respectively in the related discordant and stratiform G orebodies; galena-sphalerite isotope palaeotemperatures are not too consistent, ranging from 40 to 430°C (using the calibration of Czamanske and Rye (1974). New facts are as follows: barite ¹⁸O-values range from –13 to –17, stratiform barites ranging from 13 to 14.5; sulphides separated from a single stratiform ore lens hand specimen usually have ³⁴ S_sl > ³⁴ S_ga > ³⁴ S_py; the outward decrease in ³⁴ S-values in the stratiform G orebody is confined to the first few hundred feet only; pyrite ³⁴ S-values progressively increase downwards through one stratiform sulphide orebody; yet variations of 13 occur within a single colloform pyrite structure from another stratiform orebody. It is concluded that there were at least two sources of sulphur, seawater sulphate and deep-seated sulphur. The former was the dominant source of all sulphate and, via biogenic reduction, of the sulphur in the bulk of the stratiform sulphide. The latter was the source of the sulphur in the vein sulphides. There was minimal isotopic interaction between the cool seawater sulphate and the warm unwelling ore fluid sulphur species, even though the latter precipitated under near isotopic equilibrium conditions when the temperature dropped and/or the pH and Eh increased. The lack of isotopic equilibrium between pyrite and ore sulphides in the stratiform ore lenses may result from the latter having precipitated slightly later than the former because of solubility relationships. Overall the present isotopic evidence supports considerable geological evidence favoring a syngenetic origin for the stratiform Silvermines orebodies.     

Mineralogical criteria in the origin of marine iron-manganese nodules

In iron-manganese nodules from the floor of Pacific ocean, Baltic, White Sea and Kara Sea, iron bydroxide '-FeOOH was analysed in the laboratory. In buried ooze, reduction processes generate Fe(HCO₃)₂ which migrates into the upper part of the bottom ooze and into near bottom sea water where Fe(OH)₂ is formed. The oxidation process of Fe²⁺ to Fe³⁺, without participation of iron bacteria, leads to the topotactic transformation of Fe(OH)₂ to '-FeOOH. Marine water does not contain Fe²⁺ and cannot be a direct source of iron deposited in the nodules. Discovery of '-FeOOH in marine nodules permits the consideration that both iron and manganese were derived from the buried bottom mud, which during diagenetic processes led to the transfer of these metals in solutions and their upward migration.     

Sulphur isotope patterns from the Bleiberg deposit (Eastern Alps) and their implications for genetically affiliated lead–zinc deposits

Summary A set of 354 sulphur isotope data from the Bleiberg deposit, the type deposit of Alpine low temperature carbonate hosted Pb–Zn deposits (APT deposits), is critically evaluated applying statistical methods. The sulphur isotope patterns vary significantly among the ore horizons. This suggests a long lasting and polyphase mineralisation system. The sulphur isotope composition of barite corresponds to that of Carnian seawater (i.e. 16 ³⁴S). The ³⁴S values of the iron sulphides correspond to data from sedimentary iron sulphides. Pb and Zn sulphides are characterized by three normally distributed ³⁴S populations with mean values of –6 to –8, –13 to –18, and –25 to –29. Heavy sulphur (>–10 ³⁴S) indicates contribution of sulphide sulphur from epigenetic-hydrothermal fluids, whereas light sulphide sulphur (<–21 ³⁴S) was produced by sulphur – reducing bacteria. The intermediate population is explained by mixing of sulphur derived from these two sources. Other sources of local importance, however, can not be excluded. The isotope populations correspond only partly to the paragenetic ore stages. The sulphur isotope patterns in the APT deposits are regionally different. Data from other low-temperature sediment-hosted Pb–Zn deposits support the proposed interpretation. A comparison demonstrates that the sulphur isotope patterns of APT deposits correspond to patterns of the Irish type deposits, but are different to those of Mississippi Valley type deposits.Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1007/s00710-004-0071-3     

Invasion of anthropogenic CO<Subscript>2</Subscript> recorded in planktonic foraminifera from the northern Gulf of Aqaba

The stable carbon isotopic composition of the planktonic foraminifera Globigerinoides sacculifer and G. ruber (white) and sedimentary organic matter from the northern Gulf of Aqaba have been investigated to estimate changes in ¹³C_DIC in surface waters during the last 1,000 years. The high sedimentation rates at the core sites (about 54 cm/Kyear) provide high temporal resolution (~10 years). Recent sediments at the top of the cores reflect conditions younger than 1950. The ¹³C records of the planktonic foraminifera from three multicores display similar trends, showing a uniform and consistent pattern before the 1750s, and a gradual decrease of approximately 0.63 over the last two centuries. This decrease seems to track the decrease of ¹³C_DIC in surface waters, which is mainly caused by the increase of anthropogenic input of ¹³C-depleted CO₂ into the atmosphere. Similarly, a trend towards lighter values of the carbon isotopic composition of sedimentary organic matter (¹³C_org) during the last 200 years supports the interpretation obtained from the planktonic foraminiferal ¹³C. Furthermore, direct measurements of seawater show that ¹³C of the dissolved inorganic carbon (DIC) in the northern Gulf of Aqaba has decreased by about 0.44 during the period 1979–2000. The average annual decrease is 0.021, which is similar to that observed globally. The ¹³C values of planktonic foraminifera combined with organic matter ¹³C from marine sediments are good indicators for reconstructing past changes in atmospheric CO₂ concentrations from the northern Gulf of Aqaba.     

Oxygen isotopes in mantle related and geothermally altered magmatites of the Transhimalayan (Gangdese) ranges

In closed magma systems SiO₂ approximately measures differentiation progress and oxygen isotopes can seem to obey Rayleigh fractionation only as a consequence of the behaviour of SiO₂. The main role of ¹⁸O is as a sensitive indicator of contamination, either at the start of differentiation ( ¹⁸O_init) or as a proportion of fractionation in AFC. Plots of ¹⁸O vs SiO₂-allow to determine initial ¹⁸O values for different sequences for source comparison. For NBS-28=9.60, the ¹⁸O at 48% SiO₂-varies between a high 6.4 for Kiglapait (Kalamarides 1984), 5.9 for Transhimalaya, 5.8 for Hachijo-Jima (Matsuhisa 1979), 5.6 for Koloula (Chivas et al. 1982) and a low 5.3 for the Darran Complex, New Zealand. The Transhimalayan batholiths (Gangdese belt) were emplaced in the Ladakh-Lhasa terrane, between the present-day Banggong-Nujiang, and Indus-Yarlung Tsangbo suture zones, after its accretion to Eurasia. The gradient of the least contaminated continuous ( ¹⁸O vs SiO₂-igneous trend line is similar to that of Koloula, and AFC calculations suggest a low secondary assimilation rate of less than 0.05 times the rate of crystallisation. Outliers enriched in ¹⁸O are frequent in the Lhasa, and apparently rare in the Ladakh transsect. Low- ¹⁸O (5.0–0) granitoids and andesites on the Lhasa-Yangbajain axis are the result of present day or recent near-surface geothermal activity; their quartzes still trace the granitoids to the Transhimalaya ¹⁸O trend line, but the distribution of low total rock or feldspar ¹⁸O values could be a guide to more recent heat flow and thermally marked tectonic lineaments. Two ignimbrites from Maqiang show hardly any ¹⁸O-contamination by crustal material.     

Genesis of copper mineralisation,Myall Creek prospect,South Australia

The Myall Creek copper prospect is in unmetamorphosed carbonaceous dolosiltstone and sandstone at the base of the late Proterozoic (Adelaidean) Tapley Hill Formation. It contains disseminated, fine-grained chalcopyrite, zincian tennanite, bornite, chalcocite, pyrite, sphalerite and galena, and irregular to straight chalcopyrite-rich veinlets. Some ore minerals rim and/or partially replace pyrite or clastic grains. There is no evidence of hydrothermal activity. The ³⁴S_CDT values of pyrite and the other sulfides fall in the wide range –3.6 to +44.2. Dolomite in both mineralised and unmineralised samples has ¹³C_PDB values concentrated around –3, and ¹⁸O_SMOW values around +25. It is concluded that the mineralising fluids were near-neutral brines which leached metals from the basement and early Adelaidean rocks. They entered the Tapley Hill sediments at moderately low temperatures via permeable strata and faults. The metals were precipitated by biogenic H₂S, and also fixed by reaction with iron sulfides and, possibly, organic matter. Continuing ascent of brines into the mineralised strata caused breakdown of detrital feldspars and Fe-Ti oxides, and some solution-remobilisation of early-formed sulfides.     

Isotopic composition of oxygen and hydrogen in mud-volcanic waters from Taman (Russia) and Kakhetia (Eastern Georgia)

The ¹⁸O and D values in mud-volcanic waters of the Taman Peninsula and Kakhetia vary from +0.7 to +10.0 and from –37 to –13 , respectively. These values increase as the Greater Caucasus is approached. The increase in 18O and D also positively correlates with fluid generation temperatures based on hydrochemical geothermometers. This is accompanied by changes in the chemical composition of waters, in which contents of alkali metals, HCO^– ₃ ion, and boron increase, while the content of halogen ions (Cl, Br, J) decreases. Changes in the isotopic composition of water are also accompanied by the increase of ¹³ in methane and decrease of ¹¹ B in clays. Analysis of formal models of the evolution of isotopic composition of mud-volcanic waters showed that mud volcanoes are recharged by freshened water from the Maikop paleobasin with an inferred isotopic composition of D –40 and ¹⁸ O –6. Based on this assumption, the ¹⁸O and D values observed in mud-volcanic waters can be explained not only by processes of distillation and condensation in a closed system, but also by combined processes of isotopic reequilibration in the water-illite-methane system.Translated from Litologiya i Poleznye Iskopaemye, No. 2, 2005, pp. 143–158.Original Russian Text Copyright © 2005 by Lavrushin, Dubinina, Avdeenko.     

Sulphur isotopic investigation of lower carboniferous vein deposits of the British Isles

Similar characteristics and age data suggest that the Pb + Zn vein deposits hosted by Lower Palaeozoic and Vendian strata of the British Isles form a genetically related group, coeval with the Lower Carboniferous carbonatehosted base-metal deposits of Ireland. Sulphur isotopic data demonstrate that there were separate sulphide and sulphate sulphur sources for the vein minerals. ³⁴S values from minerals in individual vein systems are consistent but there is a large variation between deposits, revealing distinctive local sulphur sources. The data suggests that sulphide sulphur (total range of values of ³⁴S_H2S of -6.5 to 18.62) was derived from the underlying strata while the sulphate (baryte) sulphur source (³⁴S_baryte mainly in the range 12 to 24) was groundwater or surface water that mixed with rising hydrothermal fluids in the upper reaches of the veins.     

Oxygen isotope geochemistry of pyroclastic clinopyroxene monitors carbonate contributions to Roman-type ultrapotassic magmas

The oxygen isotope geochemistry and chemical composition of clinopyroxene crystals from Alban Hills pyroclastic deposits constrain the petrological evolution of ultrapotassic Roman-type rocks. Volcanic eruptions in the 560–35 ka time interval produced thick pyroclastic deposits bearing clinopyroxene phenocrysts with recurrent chemical characteristics. Clinopyroxenes vary from Si–Mg-rich to Al–Fe-rich with no compositional break, indicating that they were derived from a continuous process of crystal fractionation. Based on the ¹⁸O and trace element data no primitive samples were recovered: monomineralic clinopyroxene cumulates set the oxygen isotope composition of primary magmas in the range of uncontaminated mantle rocks (5.5), but their REE composition resulted from extensive crystal fractionation. Departing from these mantle-like ¹⁸O_Cpx values the effects of crustal contamination of clinopyroxene O-isotope composition were identified and used to monitor chemical variations in the parental magma. ¹⁸O values in Si–Mg-rich clinopyroxene are slightly higher than typical mantle values (5.9–6.2), and the low REE contents are representative of early stages of magmatic differentiation. ¹⁸O values as high as 8.2 are associated with Al–Fe³⁺-rich clinopyroxene showing high REE contents. These ¹⁸O values are characteristic of crystals formed during the late magmatic stages of each main eruptive phase. Geochemical modelling of ¹⁸O values vs. trace element contents indicates that these ultrapotassic magmas were derived from fractional crystallization plus assimilation of limited amounts of carbonate wall rocks starting from a primary melt, and from interaction with CO₂ derived from country rocks during crystal fractionation.     

Stable isotope (C,O, S) systematics of the mercury mineralization at Idrija,Slovenia: constraints on fluid source and alteration processes

The world-class Idrija mercury deposit (western Slovenia) is hosted by highly deformed Permocarboniferous to Middle Triassic sedimentary rocks within a complex tectonic structure at the transition between the External Dinarides and the Southern Alps. Concordant and discordant mineralization formed concomitant with Middle Triassic bimodal volcanism in an aborted rift. A multiple isotopic (C, O, S) investigation of host rocks and ore minerals was performed to put constraints on the source and composition of the fluid, and the hydrothermal alteration. The distributions of the ¹³C and ¹⁸O values of host and gangue carbonates are indicative of a fracture-controlled hydrothermal system, with locally high fluid-rock ratios. Quantitative modeling of the ¹³C and ¹⁸O covariation for host carbonates during temperature dependent fluid-rock interaction, and concomitant precipitation of void-filling dolomites points to a slightly acidic hydrothermal fluid (¹³C–4 and ¹⁸O+10), which most likely evolved during isotopic exchange with carbonates under low fluid/rock ratios. The ³⁴S values of hydrothermal and sedimentary sulfur minerals were used to re-evaluate the previously proposed magmatic and evaporitic sulfur sources for the mineralization, and to assess the importance of other possible sulfur sources such as the contemporaneous seawater sulfate, sedimentary pyrite, and organic sulfur compounds. The ³⁴S values of the sulfides show a large variation at deposit down to hand-specimen scale. They range for cinnabar and pyrite from –19.1 to +22.8, and from –22.4 to +59.6, respectively, suggesting mixing of sulfur from different sources. The peak of ³⁴S values of cinnabar and pyrite close to 0 is compatible with ore sulfur derived dominantly from a magmatic fluid and/or from hydrothermal leaching of basement rocks. The similar stratigraphic trends of the ³⁴S values of both cinnabar and pyrite suggest a minor contribution of sedimentary sulfur (pyrite and organic sulfur) to the ore formation. Some of the positive ³⁴S values are probably derived from thermochemical reduction of evaporitic and contemporaneous seawater sulfates.Editorial handling: P. Lattanzi     

Fluid-rock interaction between syenites and marbles at Stephen Cross Quarry,Québec,Canada: petrological and stable isotope data

Grenville dolomitic marbles and calc-silicates at Stephen Cross Quarry, Québec, underwent contact metamorphism and metasomatism associated with the intrusion of the Wakefield syenite at ambient pressures of 0.4GPa at 1090–1070Ma. Fluid infiltration produced exoskarns, calcite+periclase+forsterite±diopside±orthoclase assemblages in the marbles, and quartz±calcite±wollastonite±diopside±anorthite assemblages in the calc-silicates. Phase-equilibria in the CaO–MgO–Al₂O₃–SiO₂–H₂O–CO₂ system suggest that fluid infiltration occurred close to the thermal peak of contact metamorphism (715–815°C) and that the fluids hadXCO₂0.15. In the metasediments, ¹⁸O values of calcite (Cc) are as low as 8.6, suggesting that the fluids were in isotopic equilibrium with the syenites (¹⁸O =8.8–10.2). Marble ¹³C(Cc) values are-0.1 to-3.2; the lack of correlation between ¹³C(Cc) and ¹⁸O(Cc) is consistent with the infiltration of water-rich fluids. The resetting of stable isotopes and the mineralogical changes can be explained by time-integrated fluid fluxes of up to 110 m³/m² (4×10⁶ mol/m²), corresponding to actual fluxes of 3×10^-11 to 3×10^-12 m³/m²-s and intrinsic permeabilities of 10^-18 to 10^-20 m² for fluid flow lasting 0.1-1Ma. Marble ¹⁸O(Cc) values do not correlate well with distance from the syenite, and fluids were probably channelled across lithological layering. The correlation between the degree of resetting of marble ¹⁸O(Cc) values with the abundance of submillimetre-wide veins, suggests that fluid focussing may have resulted from variations in fracture density. Late, lower temperature (<500°C), fluid flow formed serpentine (Serp) and brucite (Br) from periclase and forsterite. ¹⁸O(Br) and ¹⁸O(Scrp) values correlate with ¹⁸O(Cc), suggesting that retrogression involved only limited volumes of fluid. The observation that ¹⁸O(Cc-Br) and ¹⁸O(Cc-Serp) values are higher in marbles that have lower ¹⁸O(Cc) values is interpreted as indicating that fluid flow persisted to lower temperatures in those rocks due to higher intrinsic permeabilities. Calcite in the syenite was also formed by the influx of fluids during cooling. Syenite ¹⁸O(Cc) values are approximately in isotopic equilibrium with the high-temperature silicate minerals, suggesting that again only minor volumes of fluid were involved. In detail fluid flow was prolonged and complex, creating problems for the application of quantitative fluid flow models.This paper is a contribution to IGCP 304, Lower Crustal Processes     

Boninite petrogenesis and alteration history: constraints from stable isotope compositions of boninites from Cape Vogel,New Caledonia and Cyprus

¹⁸O values of unaltered olivine and pyroxene phenocrysts in boninites from several areas range from 5.8 to 7.4 and indicate that the source for most boninites is more ¹⁸O-rich than MORBs and other oceanic basalts. The source for oxygen and other major elements is most likely a refractory portion of the mantle having a ¹⁸O value of up to 7.0 to which must be added a small amount of H₂O-rich fluid to induce partial melting. This fluid, which is derived from subducted crust, is the vehicle for LREEs including Nd. The variable, normally low _Nd values typical of boninites do not correlate with the ¹⁸O values.Post eruptive exchange of oxygen in the glass of boninites with that of sea water at low temperatures (<150° C) produces ¹⁸O values of >10 in optically fresh glass. Hydration of the glass has increased the water contents of most boninites from estimated magmatic values of 1–2 wt% to 2–4 wt% and produced D values of < –80, which may be lower than the original magmatic D values. In contrast to most submarine pillow basalts, the magmatic volatile composition of boninite lavas has been extensively modified as a result of post eruptive interaction with seawater.     

Reconstruction of palaeohydrological conditions in a lagoon during the 2nd Zechstein cycle through simultaneous use of δD values of individual n-alkanes and δ<Superscript>18</Superscript>O and δ<Superscript>13</Superscript>C values of carbonates

For the first time ¹⁸O and ¹³C values from carbonates and D values of individual n-alkanes were used to reconstruct palaeohydrological conditions in a lagoon at the southern margin of the Central European Zechstein Basin (CEZB). A 12-m core covering the complete Ca2 interval and adjacent anhydrites (A1 and A2) was analyzed for ¹⁸O and ¹³C values of dolomitized carbonates and D values of individual n-alkanes. ¹⁸O_carb values (+2 to +5 vs. VPDB) were strongly influenced by evaporation and temporal freshwater input into the lagoon. The ¹³C_carb values (–1 to +4 vs. VPDB) were controlled mainly by changes in primary production. Both isotopic ratios show an inverse relationship throughout most of the core, contradicting diagenetic alteration, since ¹³C_carb values are not altered significantly during dolomitization. Assuming a temperature range of 35–40 °C in the lagoon, ¹⁸O_carb values of +2.5 to +8 (vs. VSMOW) for the lagoonal water can be reconstructed. The lagoon may have desiccated twice during the Ca2 interval, as indicated by very high ¹⁸O_carb and low ¹³C_carb values, coinciding with increasing amount of anhydrite in the analyzed sample. These events seem to reflect not just local but a regional intra-Ca2 cyclicity. Measured D values of the short-chain n-alkanes, namely n-C₁₆ and n-C₁₈ which are widely used as indicators for photosynthetic bacterial and algal input, reflect the isotopic composition of the lagoonal water. Assuming constant fractionation during incorporation of hydrogen into lipids of –160, an average D value of +70 (vs. VSMOW) can be reconstructed for the lagoonal water, accounting for very arid conditions. The long-chain n-alkanes n-C₂₇, n-C₂₈, n-C₂₉ and n-C₃₀, thought to be derived from the leaf waxes of terrestrial higher plants, were shown to be depleted in D relative to the short-chain alkanes, therefore indicating a different hydrogen source. Terrestrial plants in arid areas mainly use water supplied by precipitation. By using a smaller fractionation of –120 due to evaporation processes in the leaves, reconstructed values vary between –74 and –9 (vs. VSMOW). These values are not indicating extremely arid conditions, implying that the long-chain n-alkanes were transported trough wind and/or rivers into the lagoon at the Zechstein Sea coast. D_water values, reconstructed using the n-C₁₆ alkane and ¹⁸O _water values, independently reconstructed on the same sample using the temperature dependant fractionation for dolomites are good agreement and suggest high amounts of evaporation affecting the coastal lagoon. Altogether, our results indicate that hydrogen isotopic ratios of n-alkanes give information on their origin and are a useful proxy for palaeoclimatic reconstruction.     

Hydrogen and carbon isotope studies on the graphite-bearing metapelites in the northern Kiso district of central Japan

Measurements were made of the hydrogen isotope ratios of hydrous silicates (mica and amphibole) and whole rocks, and the carbon isotope ratios of graphite and carbonaceous matter in the metamorphic rocks from the northern Kiso district in central Japan.D values of hydrous silicates in the graphite-bearing metapelites are always higher than those in graphite-free schists, even though the sample localities of the two rock-types are very close. Hydrogen isotopic equilibrium has been attained between the coexisting minerals.D/H ratios of water in the metamorphic fluids seem to depend strongly on the presence or absence of graphite and seem to be not constant throughout the district. The district is divided into three areas of low (metamorphic zones I, II), medium (zones IIIa–V) and high ¹³C_gr value (zones VIa–VII) areas. In the high ¹³C_gr values area, the carbon contents of the graphite-bearing rocks decrease slightly from zones VIa to VII, whereas the ¹³C_gr values increase sharply from the upper part of zone VIa to VIb. TheD values of biotite in these graphite-bearing rocks are higher than those in the medium ¹³C_gr area. This suggests that methane enriched inH and¹²C is produced and liberated by the devolatilization reactions between muscovite, graphite and water. The fluid produced is composed of water, methane and a subordinate amount of carbon dioxide, and its logfO₂ value is deduced to be about 1.2 lower than that defined by the FMQ buffer. In the medium ¹³C_gr area, the ¹³C values of graphite are nearly constant (–20.8), while the Fe₂O₃/(Fe₂O₃ + FeO) ratio of the graphite-bearing rocks apparently decreases with increasing metamorphic grade.D differences in hydrous silicates between graphite-bearing and graphite-free rocks are observed. These facts are interpreted to mean that methane was produced in addition to water and carbon dioxide, and that its generation ( ratio of the fluid was about 2) had practically no isotope effect on the graphite. In the low ¹³C_gr area, the carbon contents of the rocks decrease clearly from zones I to IIIa. TheD and ¹³C_gr values of the non-metamorphosed shales are much lower than those of the low grade graphite-bearing metapelites. This suggests that methane is produced and liberated from the rocks even at the incipient stage of metamorphism.     

Oxygen and hydrogen isotope compositions as indicators of granite genesis in the New England Batholith,Australia

Oxygen and hydrogen isotope studies of a number of granite suites and mineral separates from the New England Batholith indicate that O¹⁸ can be used to discriminate the major granite protoliths. The granite suites previously subdivided on the basis of mineralogical and geochemical criteria into S-type (sedimentary) and I-type (igneous) have O¹⁸ values consistently higher in the S-type granites (10.4–12.5) than in the spatially related I-type plutons (7.7–9.9). There appears to be a systematic variation in O¹⁸ from the most S-type to the most I-type granites, the dividing point between the two occuring at O¹⁸ equal to 10. A group of leucocratic granites that form about half of the batholith and difficult to classify mineralogically and geochemically is found to have low O¹⁸ values (6.4–8.1), suggesting an affinity to the most I-type granites. A single leucogranite pluton with minor muscovite has a O¹⁸ of 9.6 which is significantly higher than other leucogranites indicating a different origin perhaps involving amphibole fractionation.The behavior of D in the plutonic rocks is much less systematic than O¹⁸. Excluding samples collected adjacent to major faults, the D values show a rough positive correlation with water content similar to, but less pronounced than, the trend previously observed in the Berridale Batholith, southeastern Australia. This relation is considered to reflect an interaction between meteoric water and the granites, the largest effect being observed in samples with the least amount of water. Of note is the generally lower D values of the upper Paleozoic New England Batholith compared with the Silurian Berridale Batholith. This difference may be related to a near equatorial paleolatitude of 22 °S in the Silurian and near polar paleolatitudes in the late Carboniferous that have been inferred for these regions. Granite samples collected from near major faults, and one ignimbrite sample of rhyodacite composition, have very low D values (less than –120) suggesting a much greater degree of interaction with meteoric water.     

A stable isotope study of retrograde alteration in SW Connemara,Ireland

Dalradian metamorphic rocks, Lower Ordovician meta-igneous rocks (MGS) and Caledonian granites of the Connemara complex in SW Connemara all show intense retrograde alteration. Alteration primarily involves sericitization and saussuritization of plagioclase, the alteration of biotite and hornblende to chlorite and the formation of secondary epidote. The alteration is associated with sealed microcracks in all rocks and planes of secondary fluid inclusions in quartz where it occurs, and was the result of a phase of fluid influx into these rocks. In hand specimen K-feldspar becomes progressively reddened with increasing alteration. Mineralogical alteration in the MGS and Caledonian granites took place at temperatures 275±15°C and in the MGS P_fluid is estimated to be 1.5 kbar during alteration. The °D values of alteration phases are:-18 to-29 (fluid inclusions),-47 to-61 (chlorites) and-11 to-31 (epidotes). Chlorite ¹⁸O values are +0.2 to +4.3, while ¹⁸O values for quartz-K-feldspar pairs show both positively sloped (MGS) and highly unusual negatively sloped (Caledonian granites) arrays, diverging from the normal magmatic field on a - plot. The stable isotope data show that the fluid that caused retrogression continued to be present in most rocks until temperatures fell to 200–140°C. The retrograde fluid had D -20 to-30 in all lithologies, but the fluid ¹⁸O varied both spatially and temporally within the range-4 to +7. The fO₂ of the fluid that deposited the epidotes in the MGS varied with its ¹⁸O value, with the most ¹⁸O-depleted fluid being the most oxidizing. The D values, together with low (<0) ¹⁸O values for the retrograde fluid in some lithologies indicate that this fluid was of meteoric origin. This meteoric fluid was probably responsible for the alteration in all lithologies during a single phase of fluid infiltration. The variation in retrograde fluid ¹⁸O values is attributed to the effects of variable oxygen isotope shifting of this meteoric fluid by fluid-rock interaction. Infiltration of meteoric fluid into this area was most likely accomplished by convection of pore fluids around the heat anomaly of the Galway granite soon after intrusion at 400 Ma. However convective circulation of meteoric water and mineralogical alteration could possible have occurred considerably later.     

Isotopic Composition (δ13C, δ18O) and Origin of Manganese Carbonate Ores of the Usa Deposit (Kuznetskii Alatau)

Isotopic compositions of carbon and oxygen are studied in different (rhodochrosite, calcareous-rhodochrosite, and chlorite–rhodochrosite) types of manganese carbonate ores from the Usa deposit (Kuznetskii Alatau). The ¹³C value varies from –18.4 to –0.7, while the ¹⁸O value ranges between 18.4 and 23.0. Host rocks are characterized by higher values of ¹³C (–1.9 to 1.0) and ¹⁸O (21.2 to 24.3). The obtained isotope data suggest an active participation of oxidized organic carbon in the formation of manganese carbonates. Manganese carbonate ores of the deposit are probably related to metasomatic processes.     

Polymetamorphic relations in iron ores from the Iron Quadrangle,Brazil: The correlation of oxygen isotope variations with deformation history

This study deals with the oxygen isotope composition of hematite-rich ore bodies in the Iron Quadrangle, Brazil. The area studied can be divided into two different regions: a western (W) zone of greenschist facies assemblages and an eastern (E) zone of amphibolite facies with transitions into granulite facies assemblages.The ¹⁸O values of 136 quartz-iron oxide pairs have been determined and temperatures of formation have been calculated. The ¹⁸O values of quartz vary between +6 and 20 except one value near +23, whereas the iron oxides fall between –4 and +10, with nearly 80% of the iron oxide values between –0.5 and 4.0. The regional distribution of the ¹⁸O values is as follows: in the W-region 85% of the quartz are >12, whereas in the E-region only 46% fall in this range, In contrast to quartz the iron oxides do not show any regional differences.The variation of oxygen isotope fractionations between quartz and iron oxides is obviously related to the complex deformation history of the iron ores. Samples with a primary schistosity (S₁) only represent peak metamorphic conditions. In the E-region the (S₁) high temperatures >700° C seem to correspond to orogenic events in the Archaen basement 2,700 m.y. ago. In the W-region S₁-temperatures between 460° and 560° C seem to represent peak metamorphic conditions of the Proterozoic Minas metamorphism 2,000 m.y. ago. Iron ores which have been overprinted by later deformation events are selectively reset to lower isotopic temperatures. The more closely spaced the schistosity planes the larger the extent of a temperature lowering.The genetic processes associated with these hematite-rich ore bodies appear to be sedimentary-metamorphic rather than metasomatic processes. Furthermore, there is no evidence for secondary leaching by weathering solutions.     

Non-equilibrium,metasomatic18O/16O effects in upper mantle mineral assemblages

Kyser, O'Neil, and Carmichael (1981, 1982) measured the ¹⁸O values of coexisting minerals from peridotite nodules in alkali basalts and kimberlites, interpreting the nodules as equilibrium assemblages. Based mainly on the systematics revealed in ¹⁸O-olivinevs. ¹⁸O-pyroxene diagrams, we have re-interpreted the Kyser et al. data as non-equilibrium phenomena. On such- diagrams, the mantle nodules exhibit data arrays that cut across the ¹⁸O=zero line; these arrays strongly resemble the non-equilibrium quartz-feldspar and feldspar-pyroxene ¹⁸O arrays that we now know arediagnostic of hydrothermally altered plutonic igneous rocks. Thus, the peridotites appear to have been open systems that underwent metasomatic exchange with an external, oxygen-bearing fluid (CO₂ magma, H₂O, etc.); during this event, the relatively inert pyroxenes exchanged at a much slower rate than did the coexisting olivines and spinels. This accounts for the correlation between ¹⁸O pyroxene-olivine and the whole-rock ¹⁸O of the peridotites, which is a major difficulty with the equilibrium interpretation. The metasomatic¹⁸O-enrichments of the peridotites can be related to metasomatic enrichments in LIL elements and the development of amphibole and phlogopite. This type of precursor metasomatic activity can explain the development of alkali basalt magmas, as well as leucitites and nephelinites (all of which tend to be slightly¹⁸O-rich relative to MORB, with ¹⁸O=+6 to +7.5). Fluids with appropriate ¹⁸O values to explain the open-system metasomatic effects can be produced by exchange with ancient subducted oceanic crust (eclogite). However, fluid/rock ratios of about 0.4 to 2.5 are required, indicating that this cannot be a mantle-wide phenomenon. Also, these non-equilibrium effects are apparently transient phenomena, probably associated with the eruptive events that brought the nodules to the surface; at characteristic mantle temperatures, the effects would likely disappear in a few tens of millions of years, or less, implying that the ultramafic nodules are not typical samples of the upper mantle.Contribution No. 4156, Publications of the Division of Geological and Planetary Sciences, California Institute of Technology     

Sulfur isotope ratios of Icelandic rocks

Sulfur isotope ratios have been determined in 27 selected volcanic rocks from Iceland together with their whole rock chemistry. The ³⁴S of analyzed basalts ranges from –2.0 to +0.4 with an average value of –0.8 Tholeiitic and alkaline rocks exhibit little difference in ³⁴S values but the intermediate and acid rocks analyzed have higher ³⁴S values up to +4.2 It is suggested that the overall variation in sulfur isotope composition of the basalts is caused by degassing. The small range of the ³⁴S values and its similarity to other oceanic and continental basalts, suggest that the depleted mantle is homogeneous in its sulfur isotope composition. The ³⁴S of the depleted mantle is estimated to be within the range for undegassed oceanic basalts, –0.5 to +1.0