Estimation of surface runoff and water‐covered area during filling of surface microrelief depressions

During the filling of surface microrelief depressions the precipitation excess (precipitation minus infiltration and interception) is divided between surface storage and runoff, i.e. runoff starts before the surface depressions are filled. Information on the division of precipitation excess is needed for modelling surface runoff during the filling of surface depressions. Furthermore, information on the surface of the area covered with water is needed for calculating infiltration of water stored in soil surface depressions. Thirty‐two soil surface microreliefs were determined in Danish erosion study plots. The slope was c. 10% for all plots. Data were treated initially by removing the slope, after which 20 ‘artificial’ slopes (1–20%) were introduced producing 640 new data sets. Runoff during filling of the microrelief storage was calculated for each of the 640 data sets using a model developed for calculating surface storage and runoff from grid elevation measurements. Runoff started immediately after the first addition of water for all data sets. On a field scale, however, runoff has to travel some distance as overland flow and storage in smaller and larger depressions below the runoff initiation point must be taken into consideration. The runoff increases by intermittent steps. Whenever a depression starts to overflow to the border of the plot, the runoff jumps accordingly. In spite of the jumps, the distribution between surface storage and runoff was closely related to the quotient between precipitation excess and depression storage capacity. Surface area covered with water was exponentially related to the amount of water stored in surface depressions. Models for calculating surface storage and runoff from grid elevation measurements are cumbersome and require time‐consuming measurements of the soil surface microrelief. Therefore, estimation from roughness indices requiring fewer measurements is desirable. New improved equations for such estimations are suggested. Copyright © 2000 John Wiley & Sons, Ltd.     

Thermal influence of urban groundwater recharge from stormwater infiltration basins

Groundwater warming below cities has become a major environmental issue; but the effect of distinct local anthropogenic sources of heat on urban groundwater temperature distributions is still poorly documented. Our study addressed the local effect of stormwater infiltration on the thermal regime of urban groundwater by examining differences in water temperature beneath stormwater infiltration basins (SIB) and reference sites fed exclusively by direct infiltration of rainwater at the land surface. Stormwater infiltration dramatically increased the thermal amplitude of groundwater at event and season scales. Temperature variation at the scale of rainfall events reached 3 °C and was controlled by the interaction between runoff amount and difference in temperature between stormwater and groundwater. The annual amplitude of groundwater temperature was on average nine times higher below SIB (range: 0·9–8·6 °C) than at reference sites (range: 0–1·2 °C) and increased with catchment area of SIB. Elevated summer temperature of infiltrating stormwater (up to 21 °C) decreased oxygen solubility and stimulated microbial respiration in the soil and vadose zone, thereby lowering dissolved oxygen (DO) concentration in groundwater. The net effect of infiltration on average groundwater temperature depended upon the seasonal distribution of rainfall: groundwater below large SIB warmed up (+0·4 °C) when rainfall occurred predominantly during warm seasons. The thermal effect of stormwater infiltration strongly attenuated with increasing depth below the groundwater table indicating advective heat transport was restricted to the uppermost layers of groundwater. Moreover, excessive groundwater temperature variation at event and season scales can be attenuated by reducing the size of catchment areas drained by SIB and by promoting source control drainage systems. Copyright © 2009 John Wiley & Sons, Ltd.     

A new approach for measuring surface hydrological connectivity

The development of surface hydrological connectivity is a key determinant of flood magnitude in drylands. Thresholds in runoff response may be reached when isolated runoff-generating areas connect with each other to form continuous links to river channels, enabling these areas to contribute to flood hydrographs. Such threshold behaviour explains observed nonlinearities and scale dependencies of dryland rainfall–runoff relationships and complicates attempts at flood prediction. However, field methods for measuring the propensity of a surface to transmit water downslope are lacking, and conventional techniques of infiltration measurement are often inappropriate for use on non-agricultural drylands. Here, we argue for a reconceptualization of the dryland surface runoff process, suggesting that the downslope transfer of water should be considered alongside surface infiltration; that is, there is a need for the “aggregated” measurement of infiltration and overland flow hydraulics. Surface application of a set volume of water at a standardized rate generates runoff that travels downslope; the distance it travels downslope is determined by infiltration along the flow, integration of flow paths, and flow resistance. We demonstrate the potential of such a combined measurement system coupled with structure-from-motion photogrammetry to identify surface controls on runoff generation and transfer on dryland hillslopes, with vegetation, slope, surface stone cover, and surface roughness all having a significant effect. The measurement system has been used on slopes up to 37° compared with the flat surface typically required for infiltration methods. On average, the field workflow takes ~10–15 min, considerably quicker than rainfall simulation. A wider variety of surfaces can be sampled with relative ease, as the method is not restricted to stone and vegetation-free land. We argue that this aggregated measurement represents surface connectivity and dryland runoff response better than standard hydrological approaches and can be applied on a much greater variety of dryland surfaces.     

Surface stone cover on desert hillslopes; parameterizing characteristics relevant to infiltration and surface runoff

Surface stones are a common feature of desert hillslopes. They influence slope processes ranging from the interception and partitioning of rainwater to the dislodgement and transport of regolith particles. The aspects of a stone mantle which relate to these various influences are diverse, and include surface cover fraction, dimensions of the infiltration annulus, and geometric and packing effects. Analyses of the characteristics of stone cover at two study sites were made using photographic methods and are used to evaluate different means of reporting mean stone sizes. It is found that mean diameter based on weight, as conventionally employed in sieve analysis, is insensitive to important stone cover characteristics and may be influenced greatly by uncommon, large stones. Similarly, mean diameters based on count become inappropriate if large numbers of small stones dominate the calculated mean, concealing other site-to-site differences in stone cover. As a more appropriate parameterization of stone geometry, the use of mean diameters weighted by stone surface area and perimeter length are proposed. These weighting factors have the advantage that they relate closely to stone characteristics relevant to slope hydrology and erosion processes.     

Rainfall runoff and erosion in Napa Valley vineyards: effects of slope,cover and surface roughness

The effects of slope, cover and surface roughness on rainfall runoff, infiltration and erosion were determined at two sites on a hillside vineyard in Napa County, California, using a portable rainfall simulator. Rainfall simulation experiments were carried out at two sites, with five replications of three slope treatments (5%, 10% and 15%) in a randomized block design at each site (0%bsol;64 m² plots). Prior to initiation of the rainfall simulations, detailed assessments, not considered in previous vineyard studies, of soil slope, cover and surface roughness were conducted. Significant correlations (at the 95% confidence level) between the physical characteristics of slope, cover and surface roughness, with total infiltration, runoff, sediment discharge and average sediment concentration were obtained. The extent of soil cracking, a physical characteristic not directly measured, also affected analysis of the rainfall–runoff–erosion process. Average cumulative runoff and cumulative sediment discharge from site A was 87% and 242% greater, respectively, than at site B. This difference was linked to the greater cover, extent of soil cracking and bulk density at site B than at site A. The extent of soil cover was the dominant factor limiting soil loss when soil cracking was not present. Field slopes within the range of 4–16%, although a statistically significant factor affecting soil losses, had only a minor impact on the amount of soil loss. The Horton infiltration equation fit field data better than the modified Philip's equation. Owing to the variability in the ‘treatment’ parameters affecting the rainfall–runoff–erosion process, use of ANOVA methods were found to be inappropriate; multiple‐factor regression analysis was more useful for identifying significant parameters. Overall, we obtained similar values for soil erosion parameters as those obtained from vineyard erosion studies in Europe. In addition, it appears that results from the small plot studies may be adequately scaled up one to two orders of magnitude in terms of land areas considered. Copyright © 2000 John Wiley & Sons, Ltd.     

Field studies on the influence of rainfall intensity,vegetation cover and slope length on soil moisture infiltration on typical watersheds of the Loess Plateau,China

Soil moisture is a key process in the hydrological cycle. During ecological restoration of the Loess Plateau, soil moisture status has undergone important changes, and infiltration of soil moisture during precipitation events is a key link affecting water distribution. Our study aims to quantify the effects of vegetation cover, rainfall intensity and slope length on total infiltration and the spatial variation of water flow. Infiltration data from the upper, middle and lower slopes of a bare slope, a natural grassland and an artificial shrub grassland were obtained using a simulated rainfall experiment. The angle of the study slope was 15° and rainfall intensity was set at 60, 90, 120, 150, and 180 mm/hr. The effect these factors have on soil moisture infiltration was quantified using main effect analysis. Our results indicate that the average infiltration depth (ID) of a bare slope, a grassland slope and an artificial shrub grassland slope was 46.7–73.3, 60–80, and 60–93.3 cm, respectively, and average soil moisture storage increment was 3.5–5.7, 5.0–9.4, and 5.7–10.2 mm under different rainfall intensities, respectively. Heavy rainfall intensity and vegetation cover reduced the difference of soil infiltration in the 0–40 cm soil layer, and rainfall intensity increased surface infiltration differences on the bare slope, the grassland slope and the artificial shrub grassland slope. Infiltration was dominated by rainfall intensity, accounting for 63.03–88.92%. As rainfall continued, the contribution of rainfall intensity to infiltration gradually decreased, and the contribution of vegetation cover and slope length to infiltration increased. The interactive contribution was: rainfall intensity * vegetation cover > vegetation cover * slope length > rainfall * slope length. In the grass and shrub grass slopes, lateral flow was found at a depth of 23–37 cm when the slope length was 5–10 m, this being related to the difference in soil infiltration capacity between different soil layers formed by the spatial cross-connection of roots.     

A statistically based runoff‐yield model coupling infiltration excess and saturation excess mechanisms

A statistically based runoff‐yield model is proposed in this paper. The model considers spatial heterogeneities of rainfall, soil infiltration capacity and soil water storage capacity that are main factors controlling runoff‐yield process. It assumes that the spatial variation of rainfall intensity at each time step can be characterized by a probability density function, which is estimated by matching the hyetograph through goodness‐of‐fit measure, whereas the spatial heterogeneities of soil infiltration capacity and soil water storage capacity are described by parabola‐type functions. Surface runoff is calculated according to infiltration excess mechanism; the statistical distribution of surface runoff rate can be deduced with the joint distribution of rainfall intensity and soil infiltration rate, thus obtaining a quasi‐analytical solution for surface runoff. Based on saturation excess mechanism, the groundwater flow (flows below the ground are collectively referred to as groundwater flow) is calculated by infiltration and the probability distribution of soil water storage capacity. Consequently, the total runoff is composed of infiltration excess and saturation excess runoff components. As an example, this model is applied to flood event simulation in Dongwan catchment, a semi‐humid region and a tributary of Yellow River in China. It indicates that the proposed runoff‐yield model could achieve acceptable accuracy. Copyright © 2011 John Wiley & Sons, Ltd.     

Influences of grass and moss on runoff and sediment yield on sloped loess surfaces under simulated rainfall

It is important to evaluate the impacts of grasses on soil erosion process so as to use them effectively to control soil and water losses on the Loess Plateau. Laboratory-simulated rainfall experiments were conducted to investigate the runoff and sediment processes on sloped loess surfaces with and without the aboveground parts of grasses and moss (GAM: grass and moss; NGAM: no grass and moss) under slope gradients of 5°, 10°, 15°, 20°, 25° and 30°. The results show that runoff from GAM and NGAM plots increased up to a slope gradient of 10° and decreased thereafter, whereas the runoff coefficients increased with gradient. The average runoff rates and runoff coefficients of NGAM plots were less than those of GAM plots except for the 5° slope. This behaviour may be due to the reduction in water infiltration under moss. The difference between GAM and NGAM plots in average runoff rates varied from 1·4 to 8%. At the same gradients, NGAM plots yielded significantly (α = 0·05) more sediment than GAM plots. Average sediment deliveries for different slopes varied from 0·119 to 3·794 g m⁻² min⁻¹ from GAM plots, and from 0·765 to 16·128 g m⁻² min⁻¹ from NGAM plots. Sediment yields from GAM plots were reduced by 45 to 85%, compared with those from the NGAM plots. Plots at 30° yielded significantly higher sediments than at the other gradients. Total sediments S increased with slope gradients G in a linear form, i.e. S = 9·25G − 39·6 with R² = 0·77*, for the GAM plots, and in an exponential model, i.e. S = 40·4 exp(0·1042G) with R² = 0·93**, for the NGAM plots. In all cases, sediment deliveries decreased with time, and reached a relative steady state at a rainfall duration of 14 min. Compared with NGAM plots, the final percentage reductions in sediment delivery from GAM plots were higher than those at the initial time of rainfall at all slopes. Copyright © 2006 John Wiley & Sons, Ltd.     

The interaction between a manmade lake and groundwater: an example site in the Aurku area,Chiayi County,Taiwan

The objectives of this study are (1) to understand the subsurface hydrology in the Aurku area, Chiayi County, southern Taiwan, and (2) to determine the interaction between the manmade lake and groundwater level through the recharge produced by infiltration by on‐site investigation and laboratory sand tank simulation. The manmade lake was selected as the field site for groundwater recharge effect so as to assess the role of infiltration from the aquaculture ponds in this area. These results can be used as reference for future application of constructing a series of manmade lakes. The field experiment was performed to measure the infiltration rate of the manmade lake by using the water balance method and double‐ring infiltration test. The results demonstrated that the manmade lake had helped the recharge of the groundwater. Raising or maintaining a higher water level of the manmade lake can promote higher infiltration. When the groundwater level is equal to or higher than the bottom of the manmade lake, infiltration will slow or cease. The field experiment and laboratory sand tank simulation demonstrated that the infiltration rate increased with the higher storage depth of the manmade lake. The laboratory simulation also indicated that while the groundwater level was lower than the bottom of manmade lake (i.e. the reference level) and the initial water depth (3 cm) was equal to or greater than 50% of the full water storage depth, the infiltration depth increased with time. However, the infiltration depth would be very small or nearly zero when the groundwater level was higher than the bottom of the manmade lake. Copyright © 2006 John Wiley & Sons, Ltd.     

Modelling crop canopy and residue rainfall interception effects on soil hydrological components for semi‐arid agriculture

Crop canopies and residues have been shown to intercept a significant amount of rainfall. However, rainfall or irrigation interception by crops and residues has often been overlooked in hydrologic modelling. Crop canopy interception is controlled by canopy density and rainfall intensity and duration. Crop residue interception is a function of crop residue type, residue density and cover, and rainfall intensity and duration. We account for these controlling factors and present a model for both interception components based on Merriam's approach. The modified Merriam model and the current modelling approaches were examined and compared with two field studies and one laboratory study. The Merriam model is shown to agree well with measurements and was implemented within the Agricultural Research Service's Root Zone Water Quality Model (RZWQM). Using this enhanced version of RZWQM, three simulation studies were performed to examine the quantitative effects of rainfall interception by corn and wheat canopies and residues on soil hydrological components. Study I consisted of 10 separate hypothetical growing seasons (1991–2000) for canopy effects and 10 separate non‐growing seasons (1991–2000) for residue effects for eastern Colorado conditions. For actual management practices in a no‐till wheat–corn–fallow cropping sequence at Akron, Colorado (study II), a continuous 10‐year RZWQM simulation was performed to examine the cumulative changes on water balance components and crop growth caused by canopy and residue rainfall interception. Finally, to examine a higher precipitation environment, a hypothetical, no‐till wheat–corn–fallow rotation scenario at Corvallis, Oregon, was simulated (study III). For all studies, interception was shown to decrease infiltration, runoff, evapotranspiration from soil, deep seepage of water and chemical transport, macropore flow, leaf area index, and crop/grain yield. Because interception decreased both infiltration and soil evapotranspiration, no significant change in soil water storage was simulated. Nonetheless, these findings and the new interception models are significant new contributions for hydrologists. Published in 2006 John Wiley & Sons, Ltd.     

An integrated statistical approach to identify the nonlinear trend of runoff in the Hotan River and its relation with climatic factors

A number of studies have indicated a transition from warm-dry to warm-wet climate in Northwest China after the 1980s. This transition was characterized by an increase in temperature and precipitation, added river runoff volume, increased lake water surface elevation and area, and elevated groundwater table. However, some literatures showed that the Hotan River has presented a contrary situation, i.e. the runoff decreased, whereas temperature and precipitation increased. In order to discover the nonlinear runoff trend and its causes in the Hotan River, based on the related data from hydrological stations, ground and air sounding meteorological stations, this study applied a comprehensive method combing correlation analysis, wavelet analysis and regression analysis to investigate the runoff change in the Hotan River with its relevant climatic factors over the past decades. The main findings are: (a) the hydrological process of the Hotan River is a nonlinear system, with a periodicity of 24 year cycle, and it shows different nonlinear trends at different time scales; (b) the data from the ground meteorological stations in the Hotan area shows a false appearance that there is almost no correlation between runoff and temperature, and a little negative correlation between runoff and precipitation; (c) but the data from air sounding meteorological stations shows the truth that there is a close relation between the runoff in the Hotan River and the 0°C level height in summer on the north slope of Kunlun Mountains. The two variables present a same periodicity, i.e. 24-year cycle, having similar nonlinear trends and significant correlations at different time scales.     

The European Soil Erosion Model (EUROSEM): a dynamic approach for predicting sediment transport from fields and small catchments

The European Soil Erosion Model (EUROSEM) is a dynamic distributed model, able to simulate sediment transport, erosion and deposition over the land surface by rill and interill processes in single storms for both individual fields and small catchments. Model output includes total runoff, total soil loss, the storm hydrograph and storm sediment graph. Compared with other erosion models, EUROSEM has explicit simulation of interill and rill flow; plant cover effects on interception and rainfall energy; rock fragment (stoniness) effects on infiltration, flow velocity and splash erosion; and changes in the shape and size of rill channels as a result of erosion and deposition. The transport capacity of runoff is modelled using relationships based on over 500 experimental observations of shallow surface flows. EUROSEM can be applied to smooth slope planes without rills, rilled surfaces and surfaces with furrows. Examples are given of model output and of the unique capabilities of dynamic erosion modelling in general. © 1998 John Wiley & Sons, Ltd.     

Experimental study of water fluxes in a residential area: 1. Rainfall,roof runoff and evaporation: the effect of slope and aspect

An experimental study of water fluxes from roofs in a residential area has quantified water fluxes from different types of roof and identified the major controls on the process. Roofs with pitches of 0°, 22° and 50° and orientations of 15° (from true north) (NNE) and 103° (ESE) were selected. A novel automatic system for monitoring has been developed. Noticeable differences in rainfall, runoff and evaporation were found for different roof slopes, aspects and heights. Depending on height, flat roofs collected 90 to 99% of rainfall recorded at ground level. Roofs with a 22° slope; facing south‐south‐west (i.e. facing the prevailing wind) captured most rain, whereas east‐south‐east facing roofs with slopes of 50° received the least. Depending on the roof slope, the average rainfall captured ranged from 62 to 93% of that at ground level. For the same slope, the results indicated that from roofs orientated normal to the prevailing wind; (i) captured rainfall was higher, (ii) evaporation was higher and (iii) runoff was less than that from roofs having other aspects. Monthly variations in the runoff–rainfall ratio followed the rainfall distribution, being lowest in summer and highest in winter. The highest mean ratio (0·91) was associated with the steeper roof slope; the lowest ratio (0·61) was for roofs facing the prevailing wind direction. For the same amount of rainfall, the runoff generated from a steeper roof was significantly higher than that generated by a moderate roof slope, but the lowest runoff was from roofs facing the prevailing wind. The results have also shown that the amount of runoff collected (under UK climatic condition) was sufficient to supply an average household in the studied area with the major part of its annual water requirements. The use of this water not only represents a financial gain for house owners but also will help protect the environment by reducing demand on water resources through the reduction of groundwater abstraction, construction of new reservoirs, and a reduction of the flood risk as its in situ use is considered a preventive measure known as a source control. Copyright © 2003 John Wiley & Sons, Ltd.     

Runoff generative process and runoff yield from arid talus mantled slopes

Previous works dealing with the influence of a stone cover on runoff yield showed that runoff, attributed to the sealing effect of the topsoil by raindrops impact, was negatively related to the per cent of stone cover and stone size. These works were conducted on gentle slopes (3–11·5 degree) with a per cent of stone cover generally lower than 50 per cent, and composed of gravels. The present study deals with the runoff yield of steep talus slopes (26–36 degree) whose per cent of stone cover is very high (90–100 per cent), composed of cobbles and boulders. Three stimulated rainstorms were performed at various rainfall. intensities and durations on each one of six plots representative of the North eastern sector of Sinai. Although the contiguous stony cover prevented surface sealing by raindrops impact, runoff developed quite quickly on most slopes, and reached at peak discharge, after approximately ten minutes, up to 56 per cent of the rainfall. Differences between plots, in time lag, peak discharge and other hydrological variables, could be attributed mainly to the properties of the upper stony layer, with stone size as the most influential factor. Contrary to previous works, a positive relationship, was obtained between stone size to runoff yield. The result is explained by the process of water concentration. Each cobble and boulder behaves, on a smaller scale, like a bare rocky surface and yields per unit area water amounts beyond the infiltration rate of the limited uncovered areas. For a given stony cover the effect of water concentration is quicker with the big blocks than with gravels. A series of graphs trying to relate theoretically the relative importance of sealing and water concentration processes in runoff generation, at various conditions of stone cover and stone size, is proposed. The graphs enable to reconcile the results of the present study with those of previous works.     

The identification of runoff-production mechanisms using environmental isotopes in a tussock grassland catchment,eastern otago,New Zealand

A previous hydrometric study of runoff production in tussock grassland drainage basins in Otago (45°50′S, 169°45′E), New Zealand, revealed a marked change of slope in storm hydrograph recessions. An environmental isotope study was initiated to investigate the runoff mechanisms operating and to test specific hypotheses to explain this break in the hydrograph recession. The results indicated that for quickflow volumes in excess of 10mm, the first part of the storm hydrograph can be attributed to two separate sources, namely, ‘old’ water from a shallow, unconfined groundwater reservoir and ‘new’ water from saturation overland flow on the lower wetlands of concave slopes. Despite the extensive area of wetlands, ‘old’ water runoff from the unconfined groundwater reservoir is delivered more rapidly to the stream than ‘new’ water from saturation overland flow. Substantial surface storage in the wetlands has first to be exceeded before rain becomes a significant part of stream discharge. For quickflow volumes less than 10mm, only ‘old’ water from groundwater contributes to the first part of the hydrograph recession. This means that only the largest 7 per cent of storms (in terms of quickflow volume) generate quickflow containing significant amounts of ‘new water’. The second part of the recession of the storm hydrograph consists of ‘old’ water derived from a remarkably well-mixed shallow unconfined groundwater body.     

Water flux and sediment transport within a forested landscape: the role of connectivity,subsurface flow,and slope length scale on transport mechanism

The connectivity and upscaling of overland runoff and sediment transport are important issues in hillslope hydrology to identify water flux and sediment transport within landscape. These processes are highly variable in time and space with regard to their interactions with vegetation and soil surface conditions. The generation of overland runoff and its spatial connectivity were examined along a slope to determine the variations in the transport mechanism of runoff and soil particles by rain splash and overland runoff. Field experiments were conducted by erosion plots on a steep hillslope at lengths of 5, 10, and 15 m. The overland runoff connectivity and flow transport distance decreased with the slope length, while spatial variability of infiltration increased significantly with the slope length. Observation of subsurface flow revealed that surface soil and litter layer could have important role in water transport. However, the surface soil water content and water flux transport along the slope was highly variable for different storm events; the variability was related to the complexity of the system, mainly by way of the initial wetness conditions and infiltration characteristics. Only net rain‐splashed soil was measurable, but examination of the water flux, overland runoff and sediment transport connectivity, characteristics of sheetwash, and the variability in spatial infiltration indicated an increase in the contribution of the rain splash transport mechanism along the slope. Copyright © 2013 John Wiley & Sons, Ltd.     

Runoff generation and routing on artificial slopes in a Mediterranean–continental environment: the Teruel coalfield,Spain

The aim of this study was to identify the mechanisms of runoff generation and routing and their controlling factors at the hillslope scale, on artificial slopes derived from surface coal mining reclamation in a Mediterranean–continental area. Rainfall and runoff at interrill and microcatchment scales were recorded for a year on two slopes with different substrata: topsoil cover and overburden cover. Runoff coefficient and runoff routing from interrill areas to microcatchment outlets were higher in the overburden substratum than in topsoil, and greater in the most developed rill network. Rainfall volume is the major parameter responsible for runoff response on overburden, suggesting that this substratum is very impermeable—at least during the main rainfall periods of the year (late spring and autumn) when the soil surface is sealed. In such conditions, most rainfall input is converted into runoff, regardless of its intensity. Results from artificial rainfall experiments, conducted 3 and 7 years after seeding, confirm the low infiltration capacity of overburden when sealed. The hydrological response shows great seasonal variability on the overburden slope in accordance with soil surface changes over the year. Rainfall volume and intensities (I₃₀, I₆₀) explain runoff at the interrill scale on the topsoil slope, where rainfall experiments demonstrated a typical Hortonian infiltration curve. However, no correlation was found at the microcatchment level, probably because of the loss of functionality of the only rill as ecological succession proceeded. The runoff generation mechanism on the topsoil slope is more homogeneous throughout the year. Runoff connectivity, defined as the ratio between runoff rates recorded at the rill network scale and those recorded at the interrill area scale in every rainfall event, was also greater on the rilled overburden slope, and in the most developed rill network. The dense rill networks of the overburden slope guarantee very effective runoff drainage, regardless of rainfall magnitude. Rills drain overland flow from interrill‐sealed areas, reducing the opportunity of reinfiltration in areas not affected by siltation. Runoff generation and routing on topsoil slopes are controlled by grass cover and soil moisture content, whereas on overburden slopes rill network density and soil moisture content are the main controlling factors. Copyright © 2002 John Wiley & Sons, Ltd.     

Experimental study of water fluxes in a residential area: 2. Road infiltration,runoff and evaporation

Lack of accurate data has led some hydrologists and city planners to assume that urban infiltration is zero and runoff is 100% of the rainfall. These assumptions lead to an over estimation of road runoff volume and an underestimation of direct recharge to groundwater, which is already rising under some UK cities. This study investigates infiltration and runoff processes and quantifies the percentage of rainfall that contributes to storm drainage, and that which infiltrates through different types of road surface. Access tubes were installed for measuring soil water content using a neutron probe in three car parks, a road and a grass site at the Centre for Ecology and Hydrology, Crowmarsh Gifford, Wallingford. Storm drainage was recorded at the exit of the Thamesmead Estate in Crowmarsh Gifford, just before the drain joins the River Thames at Wallingford. Rainfall and water table depth were also recorded. Weekly measurements of soil moisture content indicated that the top 40 cm layer is not influenced by water‐table fluctuations and, therefore, positive changes in soil moisture could be attributed to infiltration of rainfall through the surface. Depending on the nature of the surface, subsurface layers, level of traffic, etc., between 6 and 9% of rainfall was found to infiltrate through the road surfaces studied. The storm drainage generated by road runoff revealed a flow pattern similar to that of the receiving watercourse (River Thames) and increased with the increase of infiltration and soil water content below the road surface. The ratio of runoff to rainfall was 0·7, 0·9 and 0·5 for annual, winter (October–March) and summer (April–September) respectively. As the results of the infiltration indicated that 6 to 9% of annual rainfall infiltrates through the road surface, this means that evaporation represents, 21–24% of annual rainfall, with more evaporation taking place during summer than winter. Copyright © 2003 John Wiley & Sons, Ltd.     

Sediment deposition and overland flow hydraulics in simulated vegetative filter strips under varying vegetation covers

Vegetative filter strips (VFSs) can effectively trap sediment in overland flow, but little information is available on its performance in controlling high‐concentration sediment and the runoff hydraulics in VFS. Flume experiments were conducted to investigate the sediment deposition, hydraulics of overland flow and their relationships in simulating VFS under a great range of sediment concentrations with four levels of vegetation cover (bare slope and 4%, 11% and 17%) and two flow rates (15 and 30 L min^?1). Sediment concentrations varied from 30 to 400 kg m^?3 and slope gradient was 9°. Both the deposited sediment load and deposition efficiency in VFS increased as the vegetation cover increased. Sediment concentration had a positive effect on the deposited load but no effect on deposition efficiency. A lower flow rate corresponded to greater deposition efficiency but had little effect on deposited load. Flow velocities decreased as vegetation cover increased. Sediment concentration had a negative effect on the mean velocity but no effect on surface velocity. Hydraulic resistance increased as the vegetation cover and sediment concentration increased. Sediment deposition efficiency had a much more pronounced relationship with overland flow hydraulics compared with deposited load, especially with the mean flow velocity, and there was a power relationship between them. Flow regime also affected the sediment deposition efficiency, and the efficiency was much higher under subcritical than supercritical flow. The results will be useful for the design of VFS and the control of sediment flowing into rivers in areas with serious soil erosion. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of urbanization on streamflow in the Atlanta area (Georgia,USA): a comparative hydrological approach

For the period from 1958 to 1996, streamflow characteristics of a highly urbanized watershed were compared with less‐urbanized and non‐urbanized watersheds within a 20 000 km² region in the vicinity of Atlanta, Georgia: in the Piedmont and Blue Ridge physiographic provinces of the southeastern USA. Water levels in several wells completed in surficial and crystalline‐rock aquifers were also evaluated. Data were analysed for seven US Geological Survey (USGS) stream gauges, 17 National Weather Service rain gauges, and five USGS monitoring wells. Annual runoff coefficients (RCs; runoff as a fractional percentage of precipitation) for the urban stream (Peachtree Creek) were not significantly greater than for the less‐urbanized watersheds. The RCs for some streams were similar to others and the similar streams were grouped according to location. The RCs decreased from the higher elevation and higher relief watersheds to the lower elevation and lower relief watersheds: values were 0·54 for the two Blue Ridge streams, 0·37 for the four middle Piedmont streams (near Atlanta), and 0·28 for a southern Piedmont stream. For the 25 largest stormflows, the peak flows for Peachtree Creek were 30% to 100% greater than peak flows for the other streams. The storm recession period for the urban stream was 1–2 days less than that for the other streams and the recession was characterized by a 2‐day storm recession constant that was, on average, 40 to 100% greater, i.e. streamflow decreased more rapidly than for the other streams. Baseflow recession constants ranged from 35 to 40% lower for Peachtree Creek than for the other streams; this is attributed to lower evapotranspiration losses, which result in a smaller change in groundwater storage than in the less‐urbanized watersheds. Low flow of Peachtree Creek ranged from 25 to 35% less than the other streams, possibly the result of decreased infiltration caused by the more efficient routing of stormwater and the paving of groundwater recharge areas. The timing of daily or monthly groundwater‐level fluctuations was similar annually in each well, reflecting the seasonal recharge. Although water‐level monitoring only began in the 1980s for the two urban wells, water levels displayed a notable decline compared with non‐urban wells since then; this is attributed to decreased groundwater recharge in the urban watersheds due to increased imperviousness and related rapid storm runoff. Copyright © 2001 John Wiley & Sons, Ltd.