河北-铅锌矿床的硫同位素研究

本文研究的铅锌矿床在大地构造上位于华北地台燕山沉降带中部马兰峪背斜的北翼。北翼主要出露太古界和上元古界地层。     

Geology and Geochemistry of the Dashuigou Tellurium Deposit,Western Sichuan,China

The Dashuigou tellurium deposit, located on the western margin of the Yangtze platform, is unique. The deposit is hosted by Triassic metabasalt 50 to 80 meters thick. The orebodies occur as a group of NNE-striking parallel veins. Mineralization developed in three stages: Stage I— pyrrhotite-pyrite, Stage II—tetradymite, and Stage III—chalcopyrite-pyrite. Stage II is the principal tellurium mineralization stage and the tellurium-bearing minerals are mainly tetradymite, tsumoite, tellurbismuth, joseite, calaverite, stuetzite, and native tellurium. The general ore grade of the tellurium in Stage II ranges from 0.2 to 5 wt%, and it reaches 15 to 25 wt% for the massive ores. The dominant gangue minerals are calcite and dolomite, with minor biotite, muscovite, albite, quartz, and chlorite.

Fluid-inclusion studies of calcite, dolomite, and quartz from Stages I, II, and III yield homogenization temperatures of 356° to 260° C (mean = 320° C), 295° to 198° C (mean = 240°), and 235° to 152° C (mean = 170° C), respectively. Salinities of primary fluid inclusions in all three stages are 1.5 to 5.8 wt% NaCl equivalent, 9 to 15.2 wt% NaCl equivalent, and 2.8 to 3.0 wt% NaCl equivalent, respectively.

Isotopic studies show that δ34 values of sulfides range from -2.2 to +2.8 per mil. δ¹³C values of calcites and dolomites in the ore veins range from -5.3 to -7.42 per mil, and δ¹⁸O values range from +10.9 to +13.1 per mil, which are quite different from the δ¹³C values of+1.0 to +2.8 per mil and δ¹⁸O values of +16.8 to +28.5 per mil for the calcites from the Triassic carbonates in the deposit. The δD and δ¹⁸O values of muscovite and quartz were measured to be -61 to -54 per mil and +9.9 to +13.0 per mil, respectively. Values of δ¹⁸O_water computed from fluid-inclusion trapping temperatures are +3.9 and +7 per mil.

A date of 93 Ma was obtained through measurement of muscovite from the No. 12 ore vein. Sulfur-, oxygen-, carbon-, and hydrogenisotope data indicate that the ore-forming substances of the Dashuigou tellurium deposit were derived from deep-seated sources, and the mineralizations probably are associated with Late Mesozoic alkaline or alkaline granitic magmatism. The estimated sulfur fugacities (fs₂) are 10^?16.7 for Stage I and 10^?14 to 10^15.5 for Stage II, whereas the tellurium fugacities (f_Te2) are 10^?15 to 10^?14 and 10^?11.2 to 10^?10.5, respectively.     

Geological and Geochemical Characteristics of the Zhulazhaga Gold Deposit in Inner Mongolia, China

Located in Alxa Zuoqi (Left Banner) of Inner Mongolia, China, the Zhulazhaga gold deposit is the first largescale gold deposit that was found in the middle-upper Proterozoic strata along the north margin of the North China craton in recent years. It was discovered by the No. l Geophysical and Geochemical Exploration Party of Inner Mongolia as a result of prospecting a geochemical anomaly. By now, over 50 tonnes of gold has been defined, with an average Au grade of 4 g/t. The ore bodies occur in the first lithological unit of the Mesoproterozoic Zhulazhagamaodao Formation (MZF), which is composed mainly of epimetamorphic sandstone and siltstone and partly of volcanic rocks. With high concentration of gold,the first lithological unit of the MZF became the source bed for the late-stage ore formation. Controlled by the interstratal fracture zones, the ore bodies mostly appear along the bedding with occurrence similar to that of the strata. The primitiveore types are predominantly the altered rock type with minor ore belonging to the quartz veins type. There are also some oxidized ore near the surface. The metallic minerals are composed mainly of pyrite, pyrrhotite and arsenopyrite with minor chalcopyrite, galena and limonite. Most gold minerals appear as native gold and electrum. Hydrothermal alterations associated with the ore formation are actinolitization, silicatization, sulfidation and carbonation. A total of 100 two-phase H2O-rich and 7 three-phase daughter crystal-beating inclusions were measured in seven goldbearing quartz samples from the Zhulazhaga gold deposit. The homogenization temperatures of the two-phase H2O-rich inclusions range from 155 to 401℃, with an average temperature of 284℃ and bimodal distributions from 240 to 260℃ and 300 to 320℃ respectively. The salinities of the two-phase H2O-rich inclusions vary from 9.22wt% to 24.30wt% NaCl eqniv, with a mode between 23 wt% and 24wt% NaC1 equiv. Comparatively, the homogenization temperatures of the threephase daughter crystal-beating inclusions vary from 210 to 435℃ and the salinities from 29.13wt% to 32.62wt% NaCl equiv. It indicates that the ore-forming fluid is meso-hypothermal and characterized by high salinity, which is apparently different from the metamorphic origin with low salinity. It suggests a magmatic origin of the gold-bearing fluid. The δ^18O values of quartz from auriferous veins range from 11.9 to 16.3 per mil, and the calculated δ^18OH2O values in equilibrium with quartz vary from 1.06 to 9.60 per mil, which fall between the values of meteoric water and magmatic water. It reflects that the ore-forming fluid may be the product of mixing of meteoric water and magmatic water.Based on geological and geochemical studies of the Zhulazhaga gold deposit, it is supposed that the volcanism in the Mesoproterozoic might make gold pre-concentrate in the strata. The extensive and intensive Hercynian tectono-magmatic activity not only brought along a large number of ore-forming materials, but also made the gold from the strata rework. It can be concluded that the ore bodies were mainly formed in late hydrothermal reworking stage. Compared with typical gold deposits associated with epimetamorphic clastic rocks, the Zhulazhaga deposit has similar features in occurrence of ore bodies, ore-controlling structure, wall-rock alterations and mineral assemblages. Therefore, the Zhulazhaga gold deposit belongs to the epimetamorphic clastic rock type.     

Geology,Mineralogy, Geochronology,and Sulfur Isotope Constraints on the Genesis of the Luanling Gold Telluride Deposit,Western Henan Province,Central China

The Luanling gold telluride deposit in the Xiong'ershan region is located in the southern margin of the North China Craton. The deposit formed in four stages, that is, an early pyrite‐quartz stage (I), a pyrite‐molybdenite stage (II), a sulfide‐telluride‐gold stage (III), and a late carbonate stage (IV). Six species of telluride in stage (III) are recognized, including hessite, altaite, petzite, unidentified Au‐Ag‐Te mineral, empressite, and unidentified Ag‐Te‐S mineral. Gold occurs mostly as native gold and electrum along the microfractures of sulfides or the contact between sulfide and telluride. The mineralization temperature of stage I and stage III ranges from 296 to 377°C and 241 to 324°C, respectively. Tellurides in stage III precipitate at the log?_S2 from ?14.3 to ?7.3 and log?_Te2 from ?17.4 to ?9.4. The ores were formed in an oxidizing environment. The Re‐Os model ages of molybdenite are 162–164 Ma, which indicate that the main ore formation stage was in the Late Jurassic. The Re contents of five molybdenite samples from the Luanling deposit have a range of 36.32–81.95 ppm, except for one large value of 220 ppm, which indicates that the ore‐forming materials are mainly derived from a crustal‐dominated source. The δ³⁴S values of sulfides range from ?17.6 to ?6.2‰, whereas those of sulfates are from 6.8 to 11.5‰. The δ³⁴S_∑S value of the ore‐forming system is 0.0–3.7‰, indicating that the sulfur of the Luanling deposit derived from a deep igneous source. Mineral association and isotope data of the Luanling deposit, together with its geodynamic setting, imply that this deposit belongs to a part of the metallogenic system of the Nannihu‐Sandaozhuang, Shangfangou porphyry molybdenum deposits, and the Late Jurassic granitic intrusions.     

Origin of the Dachang gold deposit,NW China: constraints from H,O, S,and Pb isotope data

The Dachang gold deposit is located in the Late Triassic Songpan-Ganzi Fold Belt, NE Tibetan Plateau. Gold ore is concentrated as veins along secondary faults and fracture zones in the Bayan Har Group metaturbidites. No exposed felsic plutons are present in the vicinity of the deposit. The auriferous veins contain <15% sulphide minerals, mainly arsenopyrite, pyrite, and stibnite. Gold is commonly enclosed within arsenopyrite and pyrite. Typical alteration around the ore bodies includes silicification, sericitization, and weak carbonatization.

Gold-bearing quartz samples have δ¹⁸O values of 16.9–21.2‰ (V-SMOW) from which δ¹⁸O_H2O values of 6.2–9.6‰ can be calculated from the fluid inclusion temperatures (or 10.0 to 12.7‰ if we used the average arsenopyrite geothermometer temperature of 301°C). The δD values of fluid inclusions in quartz range from –90‰ to –72‰. δ³⁴S values of gold-bearing sulphides mainly range from –5.9‰ to –2.8‰ (V-CDT). Pyrite and arsenopyrite in ores have ²⁰⁶Pb/²⁰⁴Pb ratios of 18.2888 to 18.4702, ²⁰⁷Pb/²⁰⁴Pb ratios of 15.5763 to 15.6712, and ²⁰⁸Pb/²⁰⁴Pb ratios of 38.2298 to 38.8212. These isotopic compositions indicate that the ore-forming fluids were of metamorphic origin, and the S and Pb may have been derived from the host metaturbidites of the Bayan Har Group. The Dachang Au deposit has geological and geochemical features similar to orogenic gold deposits. We propose that the ores formed when the Songpan-Ganzi Fold Belt was intensely deformed by Late Triassic folding and thrusting. Large-scale thrusting resulted in regional allochthons of different scales, followed by secondary faults or fracture zones that controlled the ore bodies.     

Porphyry-Style Petropavlovskoe Gold Deposit,the Polar Urals: Geological Position,Mineralogy, and Formation Conditions

Geological and structural conditions of localization, hydrothermal metasomatic alteration, and mineralization of the Petropavlovskoe gold deposit (Novogodnenskoe ore field) situated in the northern part of the Lesser Ural volcanic–plutonic belt, which is a constituent of the Middle Paleozoic island-arc system of the Polar Urals, are discussed. The porphyritic diorite bodies pertaining to the late phase of the intrusive Sob Complex play an ore-controlling role. The large-volume orebodies are related to the upper parts of these intrusions. Two types of stringer–disseminated ores have been revealed: (1) predominant gold-sulfide and (2) superimposed low-sulfide–gold–quartz ore markedly enriched in Au. Taken together, they make up complicated flattened isometric orebodies transitory to linear stockworks. The gold potential of the deposit is controlled by pyrite–(chlorite)–albite metasomatic rock of the main productive stage, which mainly develops in a volcanic–sedimentary sequence especially close to the contacts with porphyritic diorite. The relationships between intrusive and subvolcanic bodies and dating of individual zircon crystals corroborate a multistage evolution of the ore field, which predetermines its complex hydrothermal history. Magmatic activity of mature island-arc plagiogranite of the Sob Complex and monzonite of the Kongor Complex initiated development of skarn and beresite alterations accompanied by crystallization of hydrothermal sulfides. In the Early Devonian, due to emplacement of the Sob Complex at a depth of approximately 2 km, skarn magnetite ore with subordinate sulfides was formed. At the onset of the Middle Devonian, the large-volume gold porphyry Au–Ag–Te–W ± Mo,Cu stockworks related to quartz diorite porphyry—the final phase of the Sob Complex— were formed. In the Late Devonian, a part of sulfide mineralization was redistributed with the formation of linear low-sulfide quartz vein zones. Isotopic geochemical study has shown that the ore is deposited from reduced, substantially magmatic fluid, which is characterized by close to mantle values δ³⁴S = 0 ± 1‰, δ¹³C =–6 to–7‰, and δ¹⁸O = +5‰ as the temperature decreases from 420–300°C (gold–sulfide ore) to 250–130°C (gold–(sulfide)–quartz ore) and pressure decreases from 0.8 to 0.3 kbar. According to the data of microanalysis (EPMA and LA-ICP-MS), the main trace elements in pyrite of gold orebodies are represented by Co (up to 2.52 wt %), As (up to 0.70 wt %), and Ni (up to 0.38 wt %); Te, Se, Ag, Au, Bi, Sb, and Sn also occur. Pyrite of the early assemblages is characterized by high Co, Te, Au, and Bi contents, whereas the late pyrite is distinguished by elevated concentrations of As (up to 0.7 wt %), Ni (up to 0.38 wt %), Se (223 ppm), Ag (up to 111 ppm), and Sn (4.4 ppm). The minimal Au content in pyrite of the late quartz–carbonate assemblage is up to 1.7 ppm and geometric average is 0.3 ppm. The significant correlation between Au and As (furthermore, negative–0.6) in pyrite from ore of the Petropavlovskoe deposit is recorded only for the gold–sulfide assemblage, whereas it is not established for other assemblages. Pyrite with higher As concentration (up to 0.7 wt %) is distinguished only for the Au–Te mineral assemblage. Taking into account structural–morphological and mineralogical–geochemical features, the ore–magmatic system of the Petropavlovskoe deposit is referred to as gold porphyry style. Among the main criteria of such typification are the spatial association of orebodies with bodies of subvolcanic porphyry-like intrusive phases at the roof of large multiphase pluton; the stockwork-like morphology of gold orebodies; 3D character of ore–alteration zoning and distribution of ore components; geochemical association of gold with Ag, W, Mo, Cu, As, Te, and Bi; and predominant finely dispersed submicroscopic gold in ore.     

The mangazeya Ag–Pb–Zn vein deposit hosted in sedimentary rocks,Sakha-Yakutia,Russia: Mineral assemblages,fluid inclusions,stable isotopes (C,O, S), and origin

The succession of mineral assemblages, chemistry of gangue and ore minerals, fluid inclusions, and stable isotopes (C, O, S) in minerals have been studied in the Mangazeya silver–base-metal deposit hosted in terrigenous rocks of the Verkhoyansk Fold–Thrust Belt. The deposit is localized in the junction zone of the Kuranakh Anticlinorium and the Sartanga Synclinorium at the steep eastern limb of the Endybal Anticline. The deposit is situated at the intersection of the regional Nyuektame and North Tirekhtyakh faults. Igneous rocks are represented by the Endybal massif of granodiorite porphyry 97.8 ± 0.9 Ma in age and dikes varying in composition. One preore and three types of ore mineralization separated in space are distinguished: quartz–pyrite–arsenopyrite (I), quartz–carbonate–sulfide (II), and silver–base-metal (III). Quartz and carbonate (siderite) are predominant in ore veins. Ore minerals are represented by arsenopyrite, pyrite, sphalerite, galena, fahlore, and less frequent sulfosalts. Three types of fluid inclusions in quartz differ in phase compositions: two- or three-phase aqueous–carbon dioxide (FI I), carbon dioxide gas (FI II), and two-phase (FI III) containing liquid and a gas bubble. The homogenization temperature and salinity fall within the ranges of 367–217°C and 13.8–2.6 wt % NaCl equiv in FI I; 336–126°C and 15.4–0.8 wt % NaCl equiv in FI III. Carbon dioxide in FI II was homogenized in gas at +30.2 to +15.3°C and at +27.2 to 29.0°C in liquid. The δ³⁴S values for minerals of type I range from–1.8 to +4.7‰ (V-CDT); of type II, from–7.4 to +6.6‰; and of type III, from–5.6 to +7.1‰. δ¹³C and δ¹⁸O vary from–7.0 to–6.7‰ (V-PDB) and from +16.6 to +17.1 (V-SMOW) in siderite-I; from–9.1 to–6.9‰ (V-PDB) and from +14.6 to +18.9 (V-SMOW) in siderite-II; from–5.4 to–3.1‰ (V-PDB) and from +14.6 to +19.5 (V-SMOW) in ankerite; and from–4.2 to–2.9‰ (V-PDB) and from +13.5 to +16.8 (V-SMOW) in calcite. The data on mineral assemblages, fluid inclusions, and ratios of stable isotopes allow us to speak about the formation of the Mangazeya deposit in relation to the activity of the hydrothermal–magmatic system. The latter combines emplacement of subvolcanic granitic stocks and involvement of fluids variable in salinity and temperature in ore deposition zone. The fluids released from crystallizing felsic magma and were formed in a convective cell by heating of meteoric and marine waters. The mechanism of ore deposition is related to phase separation (boiling) and mixing of fluids.     

The Talgan massive sulfide deposit, the southern Urals, Russia, as an example of subseafloor ore deposition from magmatic fluid

The sequence of orebody formation at the Talgan massive sulfide deposit; morphology of sulfide orebodies; mineralogy, texture, and structure of ore; chemical composition of minerals; and fluid inclusions and relationships between stable isotopes (S, C, O) in sulfides from ores and carbonate rocks are discussed. The deposit is localized in the Uzel’ga ore field of the northern Magnitogorsk Megazone. The sulfide ore is hosted in the upper felsic sequence of the Middle Devonian Karamalytash Formation, composed of basalt, basaltic andesite, and rhyodacite. Orebodies are irregular lenses lying conformably with host rocks. Pyrite, chalcopyrite, sphalerite, and fahlore are the major ore minerals; galena, bornite, and hematite are of subordinate abundance. Sulfide mineralization bears attributes of deposition under subseafloor conditions. The carbonate and rhyolite interlayers at the roofs of orebodies and the supraore limestone sequence served as screens. Zoning typical of massive sulfide deposits was not established. The study of fluid inclusions has shown that the temperature of the hydrothermal solution varied from 375 to 110°C. δ³⁴S‰ ranges from ?2.4 to +3.2‰ in pyrite, from ?1.2 to +2.8‰ in chalcopyrite, and from ?3.5 to +3.0‰ in sphalerite (CDT). These parameters correspond to an isotopic composition of magmatic sulfur without a notable percentage of sulfate sulfur. δ¹³C and δ¹⁸O of carbonates vary from ?18.1 to +5.9‰ (PDB) and from +13.7 to +27.8‰ (SMOW), respectively. The carbon and oxygen isotopic compositions of carbonates from ores and host rocks markedly deviate from the field of marine carbonates; a deep source of carbon is suggested. The results obtained show that the main mass of polysulfide ore at the Talgan deposit was formed beneath the floor of a paleoocean. The ore-forming system was short-lived and its functioning did not give rise to the formation of zonal orebodies. Magmatic fluid played the leading role in mineral formation.     

Geology,Fluid Inclusion,and Sulfur Isotope Studies of the Chehugou Porphyry Molybdenum–Copper Deposit,Xilamulun Metallogenic Belt,NE China

The Chehugou Mo–Cu deposit, located 56 km west of Chifeng, NE China, is hosted by Triassic granite porphyry. Molybdenite–chalcopyrite mineralization of the deposit mainly occurs as veinlets in stockwork ore and dissemination in breccia ore, and two ore‐bearing quartz veins crop out to the south of the granite porphyry stock. Based on crosscutting relationships and mineral paragenesis, three hydrothermal stages are identified: (i) quartz–pyrite–molybdenite ± chalcopyrite stage; (ii) pyrite–quartz ± sphalerite stage; and (iii) quartz–calcite ± pyrite ± fluorite stage. Three types of fluid inclusions in the stockwork and breccia ore are recognized: LV, two‐phase aqueous inclusions (liquid‐rich); LVS, three‐phase liquid, vapor, and salt daughter crystal inclusions; and VL, two‐phase aqueous inclusions (gas‐rich). LV and LVS fluid inclusions are recognized in vein ore. Microthermometric investigation of the three types of fluid inclusions in hydrothermal quartz from the stockwork, breccia, and vein ores shows salinities from 1.57 to 66.75 wt% NaCl equivalents, with homogenization temperatures varying from 114°C to 550°C. The temperature changed from 282–550°C, 220–318°C to 114–243°C from the first stage to the third stage. The homogenization temperatures and salinity of the LV, LVS and VL inclusions are 114–442°C and 1.57–14.25 wt% NaCl equivalent, 301–550°C and 31.01–66.75 wt% NaCl equivalent, 286–420°C and 4.65–11.1 wt% NaCl equivalent, respectively. The VL inclusions coexist with the LV and LVS, which homogenize at the similar temperature. The above evidence shows that fluid‐boiling occurred in the ore‐forming stage. δ³⁴S values of sulfide from three type ores change from ?0.61‰ to 0.86‰. These δ³⁴S values of sulfide are similar to δ³⁴S values of typical magmatic sulfide sulfur (c. 0‰), suggesting that ore‐forming materials are magmatic in origin.     

Regional Metallogenesis of the Chang’an Gold Ore Deposit in Western Yunnan: Evidences from Fluid Inclusions and Stable Isotopes

<正>The Chang'an gold ore deposit in western Yunnan is located at the southern segment of the Ailaoshan metallogenic belt.The ore bodies are preserved in fractured Ordovician sedimentary clastic rocks.The gold-bearing minerals occur dominantly in sulfide-quartz veins.Fluid inclusion analysis shows that the Chang'an gold ore deposit is characterized by epithermal gold mineralization at temperatures between 200℃and 280℃at a shallow crustal level.The mineralizing fluids have intermediate to low salinity(6%-18%) and low densities(0.72-1.27 g/cm~3).The ore minerals haveδ~(34)S in a range from -13‰to 3.57‰,concentrated from -2.06‰to 3.57‰with an average of 1.55‰.The ~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb and ~(208)Pb/~(204)Pb values are 18.9977-19.5748,15.7093-15.784,39.3814-40.2004 respectively.These isotope data suggest that the ore-forming elements were mainly derived from mixed crustal and mantle sources.The Chang'an gold ore deposit and Tongchang Cu-Mo deposit are closely related to each other in their spatial distribution and age of formation.They have similar sources of mineralizing elements and identical ore-forming metal elements,and show a close relationship in physical and chemical conditions of mineralization.The two deposits constitute an epithermal-porphyry -skarn type Cu-Mo-Au mineralization system in the Tongchang-Chang'an area,which is related to the Cenozoic high-K alkaline magmatism.     

Geochronology and fluid source constraints of the Songligou gold‐telluride deposit,western Henan Province,China: Analysis of genetic implications

The Songligou gold‐telluride deposit, located in Songxian County, western Henan Province, China, is one of many gold‐telluride deposits in the Xiaoqinling‐Xiong'ershan district. Gold orebodies occur within the Taihua Supergroup and are controlled by the WNW F101 Fault, and the fault was cut across by a granite porphyry dike. Common minerals in gold orebodies include quartz, chlorite, epidote, K‐feldspar, calcite, fluorite, sericite, phlogopite, bastnasite, pyrite, galena, chalcopyrite, sphalerite, tellurides, gold, bismuthinite, magnetite, and hematite, and pyrite is the dominant sulfide. Four mineralization stages are recognized, including pyrite‐quartz stage (I), quartz‐pyrite stage (II), gold‐telluride stage (III), and quartz‐calcite stage (IV). This work reports the Rb–Sr age of gold‐telluride‐bearing pyrite and zircon U–Pb age of granite porphyry, as well as S isotope data of pyrite and galena. The pyrite Rb–Sr isochron age is 126.6 ± 2.3 Ma (MSWD = 1.8), and the average zircon U–Pb age of granite porphyry is 166.8 ± 4.1 Ma (MSWD = 4.9). (⁸⁷Sr/⁸⁶Sr) _i values of pyrite and δ³⁴S values of sulfides vary from 0.7104 to 0.7105 and ?11.84 to 0.28‰, respectively. The obtained Rb–Sr isochron age represents the ore formation age of the Songligou gold‐telluride deposit, which is much younger than the zircon U–Pb age of the granite porphyry. Strontium and S isotopes, together with the presence of bastnaesite, suggest that the ore‐forming fluid was derived from felsic magmas with input of a mantle component and subsequently interacted with the Taihua Supergroup. Tellurium was derived from metasomatized mantle and was related to the subduction of the Shangdan oceanic crust and Izanagi plate beneath the North China Craton (NCC). This deposit is a part of the Early Cretaceous large‐scale gold mineralization in east NCC and formed in an extensional tectonic setting.     

Dashuigou Tellurium Deposit in Sichuan Province, China: S, C, O, and H Isotope Data and Their Implications on Hydrothermal Mineralization

Abstract: Dashuigou, a unique tellurium‐dominated deposit over the world, is located in the western margin of the Yangtze cra‐ton in southwestern China. It is characterized by high‐grade tellurium accompanied by bismuth, gold, silver, and sulfur, and occurs in the area of less than one km². The mineralization is divided into three stages, i.e. (1) tellurium‐bearing pyrrhotite–pyrite stage, (2) tetradymite stage, and (3) auriferous quartz veins stage. Tellurium mineralization coexisting with bismuth, silver, selenium, and gold predominantly develops in the stage 2, while the stage 1 is enriched only in sulfur and iron, and the stage 3 is very weakly mineralized with gold. The δ³⁴S values of sulfides in the ore of the deposit vary in a narrow range of –3.1 ‐ +2.8 per mil with –3.1 ‐ +2.8 per mil for the stage 1 and –0.5 ‐ +2.1 for the stage 2, showing the isotopic characteristics of mantle derived sulfur. The δ¹³C values of vein dolomites vary from –5.3 to –7.2 per mil, with –5.3 ‐ –6.6 per mil for the stage 1 and –5.3 ‐ –7.2 per mil for the stage 2, which are significantly different from those of surrounding Triassic marble with δ¹³C values of –0.3 ‐ +2.8 per mil, and show characteristics of mantle derived carbon. The δ¹⁸O values of vein dolomites range from +10.2 to +13.1 per mil, which are higher than those of carbonatite, but lower than those of the marble. Their corresponding δ¹⁸O_water values are +0.6 ‐ +3.9 per mil, with +2.7 ‐ +3.8 per mil for the stage 1 and +0.6 ‐ +3.9 per mil for the stage 2. The data implies that these vein carbonates were formed by the mixing fluids of magmatic or mantle source with meteoric or formation water. The δ¹⁸O values of ore‐forming fluids responsible for the formation of vein quartz are estimated to be +3.2 to +6.8, the δD values of inclusion fluids of the quartz are measured to be –54 to –82 per mil. All those stable isotopic data suggest the involvement of the fluids from mantle and/or mantle‐derived magmas through fault system in the forming process of the Dashuigou tellurium deposit.     

Preliminary analysis on roles of metal–organic compounds in the formation of invisible gold

The paper comprises new analytical data on the nature and occurrence of gold in solid pyrobitumen, closely associated with the main gold-bearing sulfide arsenic ores of the Bakyrchik gold deposit (Kazakhstan), related to post-collisional magmatic-hydrothermal origin. Gold mineralization of the deposit occurs mainly in the form of an “invisible” type of gold in the structures of arsenian pyrite and arsenopyrite, and the form of gold-organic compounds of pyrobitumen in carbonaceous-terrigenous sequences of Carboniferous formation. Microscopic and electron microscopic analysis, Raman and FT-Infrared analysis, mineralogical and three-step sequential extraction analysis (NH₂OH·HCl, H₂O_2, HNO₃ + HCl) has been carried out using 9 ore samples (from 3 different types of ores) for a comprehensive study of pyrobitumen and sulfide arsenic ores focusing mainly on organic matter. The sequentially extracted precious metal content of pyrobitumen reaches up to 7 ppm gold and other metals like Ag 4 ppm, Pt 31 ppb, and Pd 26 ppb, forming metal–organic compounds, while arsenic sulfide minerals incorporate 11 ppm gold, 39 ppm Ag, 0.49 ppm Pt. The enrichment of gold associating with organic matter and sulfide ore minerals was confirmed in this study. Organic matter was active in the migration of gold and the capture of gold by pyrobitumen. Moreover, the reductive organic matter agent released gold, most likely for the sulfide arsenic ore minerals. Pyrobitumen was a decisive factor in the concentration, transportation, and preservation of gold in the deposit.

     

Geology and Geochemistry of the Buerkesidai and Kuoerzhenkuola Gold Deposits in the Sawuershan Region, Xinjiang Uigur Autonomous Region, Northwest China

The Sawuershan region, one of the important gold metallogenic belts of Xinjiang, is located in the western part of the Kalatongke island arc zone of north Xinjiang, NW China. There are two gold deposits in mining, namely the Kuoerzhenkuola and the Buerkesidai deposits. Gold ores at the Kuoerzhenkuola deposit occur within Carboniferous andesite and volcanic breccias in the form of gold‐bearing quartz–pyrite veins and veinlet groups containing native gold, electrum, pyrite, pyrrhotite and chalcopyrite. Gold ores at the Buerkesidai deposit occur within Carboniferous tuffaceous siltstones in the form of gold‐bearing quartz veinlet groups and altered rocks, with electrum, pyrite and arsenopyrite as major metallic minerals. Both gold deposits are hosted by structurally controlled faults associated with intense hydrothermal alteration. The typical alteration assemblage is sericite + chlorite + calcite + quartz, with an inner pyrite–sericite zone and an outer chlorite–calcite–epidote zone between orebodies and wall rocks. δ³⁴S values (0.3–1.3‰) of pyrite of ores from Kuoerzhenkuola deposit are similar to those (0.4–2.9‰) of pyrite of ores from Buerkesidai deposit. δ³⁴S values (1.1–2.8‰) of pyrite from altered rocks are similar to δ³⁴S values of magmatic or igneous sulfide sulfur, but higher than those from ores. ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb data of sulfide from ores range within 17.72–18.56, 15.34–15.61, and 37.21–38.28, respectively. These sulfur and lead isotope compositions imply that ore‐forming materials might originate from multiple, mainly deep sources. He and Ar isotope study on fluid inclusions of pyrites from ores of Kuoerzhenkuola and Buerkesidai gold deposits produces ⁴⁰Ar/³⁶Ar and ³He/⁴He ratios in the range of 282–525 and 0.6–9.4 R/Ra, respectively, indicating a mixed source of deep‐seated magmatic water (mantle fluid) and shallower meteoric water. In terms of tectonic setting, the gold deposits in the Sawuershan region can be interpreted as epithermal. These formations resulted from a combination of protracted volcanic activity, hydrothermal fluid mixing, and a structural setting favoring gold deposition. Fluid mixing was possibly the key factor resulting in Au deposition in the gold deposits in Sawuershan region.     

Fluid Inclusion and Stable Isotope Study at the Southeastern Martabe Deposit: Purnama,Barani and Horas Ore Bodies,North Sumatra,Indonesia

The Martabe Au–Ag deposit, North Sumatra Province, Indonesia, is a high sulfidation epithermal deposit, which is hosted by Neogene sandstone, siltstone, volcanic breccia, and andesite to basaltic andesite of Angkola Formation. The deposit consists of six ore bodies that occurred as silicified massive ore (enargite–luzonite–pyrite–tetrahedrite–tellurides), quartz veins (tetrahedrite–galena–sphalerite–chalcopyrite), banded sulfide veins (pyrite–tetrahedrite–sphalerite–galena) and cavity filling. All ore bodies are controlled by N–S and NW–SE trending faults. The Barani and Horas ore bodies are located in the southeast of the Purnama ore body. Fluid inclusion microthermometry, and alunite‐pyrite and barite‐pyrite pairs sulfur isotopic geothermometry show slightly different formation temperatures among the ore bodies. Formation temperature and salinity of fluid inclusions of the Purnama ore body range from 200 to 260 C and from 6 to 8 wt.% NaCl equivalent, respectively. Formation temperature and salinity of fluid inclusions of the Barani ore body range from 200 to 220 °C and from 0 to 2.5 wt.% NaCl equivalent and those of the Horas ore body range from 240 to 275 °C and from 2 to 3 wt.% NaCl equivalent, respectively. The Barani and Horas ore bodies are less silicified and sulfides are less abundant than the Purnama ore body. A relationship between enthalpy and chloride content indicates mixing of hot saline fluids with cooler dilute fluids during the mineralization of each of the ore bodies. The δ¹⁸O values of quartz samples from the southeast ore bodies exhibit a wide range from +4.2 to +12.9‰ with an average value of +7.0‰. The δ¹⁸O values of H₂O estimated from δ¹⁸O values of quartz, barite and calcite confirm the oxygen isotopic shift to near meteoric water trend, which support the incorporation of meteoric water. Salinity of the fluid inclusions decrease from >5 wt.% NaCl equivalent in the Purnama ore body to <3 wt.% NaCl equivalent in the Barani ore body, indicating different fluid systems during mineralization. The δ³⁴S values of sulfide and sulfate in Purnama range from ? 4.2 to +5.5‰ and from +1.2 to +26.7‰, those in the Barani range from ? 4.3 to +26.4‰ and from +3.9 to +18.5‰ and those in the Horas ore body range from ? 11.8 to +3.5‰ and from +1.4 to +25.7‰, respectively. The δ³⁴S of total bulk sulfur in southeastern ore bodies (Σδ³⁴S) was estimated to be approximately +6‰. The estimated sulfur fugacity during formation of the Purnama and Horas ore bodies is relatively high. It was between 10^?4.8 and 10^?10.8 atm at 220 to 260 °C. Tellurium fugacity was between 10^?7.8 and 10^?9.5 atm at 260 °C and between 10^?9 and 10^?10.6 atm at 220 °C in the Purnama ore body. The Barani ore body was formed at lower fS₂, lower than about 10^?14 atm at 200 to 220 °C based on the presence of arsenopyrite and pyrrhotite in the early stage, and between 10^?14 and 10^?12 atm based on the existence of enargite and tennantite in the last stage. © 2016 The Society of Resource Geology     

Gold Mineralization in Banded Iron Formation in the Amalia Greenstone Belt,South Africa: A Mineralogical and Sulfur Isotope Study

The Blue Dot gold deposit, located in the Archean Amalia greenstone belt of South Africa, is hosted in an oxide (± carbonate) facies banded iron formation (BIF). It consists of three stratabound orebodies; Goudplaats, Abelskop, and Bothmasrust. The orebodies are flanked by quartz‐chlorite‐ferroan dolomite‐albite schist in the hanging wall and mafic (volcanic) schists in the footwall. Alteration minerals associated with the main hydrothermal stage in the BIF are dominated by quartz, ankerite‐dolomite series, siderite, chlorite, muscovite, sericite, hematite, pyrite, and minor amounts of chalcopyrite and arsenopyrite. This study investigates the characteristics of gold mineralization in the Amalia BIF based on ore textures, mineral‐chemical data and sulfur isotope analysis. Gold mineralization of the Blue Dot deposit is associated with quartz‐carbonate veins that crosscut the BIF layering. In contrast to previous works, petrographic evidence suggests that the gold mineralization is not solely attributed to replacement reactions between ore fluid and the magnetite or hematite in the host BIF because coarse hydrothermal pyrite grains do not show mutual replacement textures of the oxide minerals. Rather, the parallel‐bedded and generally chert‐hosted pyrites are in sharp contact with re‐crystallized euhedral to subhedral magnetite ± hematite grains, and the nature of their coexistence suggests that pyrite (and gold) precipitation was contemporaneous with magnetite–hematite re‐crystallization. The Fe/(Fe+Mg) ratio of the dolomite–ankerite series and chlorite decreased from veins through mineralized BIF and non‐mineralized BIF, in contrast to most Archean BIF‐hosted gold deposits. This is interpreted to be due to the effect of a high sulfur activity and increase in fO₂ in a H₂S‐dominant fluid during progressive fluid‐rock interaction. High sulfur activity of the hydrothermal fluid fixed pyrite in the BIF by consuming Fe²⁺ released into the chert layers and leaving the co‐precipitating carbonates and chlorites with less available ferrous iron content. Alternatively, the occurrence of hematite in the alteration assemblage of the host BIF caused a structural limitation in the assignment of Fe³⁺ in chlorite which favored the incorporation of magnesium (rather than ferric iron) in chlorite under increasing fO₂ conditions, and is consistent with deposits hosted in hematite‐bearing rocks. The combined effects of reduction in sulfur contents due to sulfide precipitation and increasing fO₂ during progressive fluid‐rock interactions are likely to be the principal factors to have caused gold deposition. Arsenopyrite–pyrite geothermometry indicated a temperature range of 300–350°C for the associated gold mineralization. The estimated δ³⁴S_ΣS (= +1.8 to +2.5‰) and low base metal contents of the sulfide ore mineralogy are consistent with sulfides that have been sourced from magma or derived by the dissolution of magmatic sulfides from volcanic rocks during fluid migration.     

Geology and Geochemical Aspects of Ore Formation at the Prestea Mesothermal Vein Gold Deposit in the Birimian System of Ghana

The Prestea lode gold deposit occurs in a graphitic shear zone in the Birimian system of Ghana. The Birimian is an Early Proterozoic greenstone assemblage (≈ 2100 Ma) with large gold deposits, consisting of a lower unit predominantly of metasediments and an upper unit of metavolcanics with interbedded sediments. The metamorphic stage is of greenschist facies grade.

The gold generally occurs as free gold or closely associated with sulfides, particularly arsenopyrite and sulfosalts. It is usually coarse grained and occurs along grain boundaries, as inclusions and in fractures with the ore minerals. The gold is nearly pure, with analyzed grains containing 95-96 wt% Au, 4-5 wt% Ag, and less than 0.1 wt% Sb, Bi, Zn, or Cu. Associated metallic phases consist of pyrite, arsenopyrite, chalcopyrite, pyrrhotite, sphalerite, galena, and sulfosalts such as tetrahedrite, boulangerite, bournonite, and jamesonite. The fluid associated with the gold mineralization was H₂O-CO₂-NaCl in composition, with a mean salinity = 3.6 wt% NaCl equivalent, CO₂ density (mean) = 0.84 ± 0.09 g/cm³, and XCO₂ = 13 to 33 mole %. Total homogenization temperatures range from 250° to 380° C. The ore fluid exhibits features suggesting contamination of volatiles such as N₂ ± CH₄ ± H₂S, or post-depositional leakages. Arsenopyrite geothermometry indicates a temperature of mineralization from 325° to 450° C. Estimated pressures of trapping range from 1.0 to 2.2 kbars, with corresponding depths from 3.5 to 7.7 km, assuming the pressure is lithostatic. The gold deposition occurred from fluids with δ¹⁸O water = +9.6 to +13.9_o and δD_{fluid irclusion} = ?29 to ?65%₀, suggesting a crustal origin for the ore-forming fluid, including a metamorphic and a magmatic source. A δ³⁴S_pyrite value of ?7.1 to ?11.7%_o and δ³⁴S_ΣS = ?9.6%_o suggests a sedimentary origin for the sulfur.

The gold deposition is attributed to destabilization of the bisulfide complex as a result of ore fluid reaction with host rock, resulting in a probable reduction by the carbonaceous matter in the host rock, and/or a decrease in the total sulfur concentration in the co-precipitation of sulfides.     

The Arinem Te‐Bearing Gold‐Silver‐Base Metal Deposit,West Java,Indonesia

The vein system in the Arinem area is a gold‐silver‐base metal deposit of Late Miocene (8.8–9.4 Ma) age located in the southwestern part of Java Island, Indonesia. The mineralization in the area is represented by the Arinem vein with a total length of about 5900 m, with a vertical extent up to 575 m, with other associated veins such as Bantarhuni and Halimun. The Arinem vein is hosted by andesitic tuff, breccia, and lava of the Oligocene–Middle Miocene Jampang Formation (23–11.6 Ma) and overlain unconformably by Pliocene–Pleistocene volcanic rocks composed of andesitic‐basaltic tuff, tuff breccia and lavas. The inferred reserve is approximately 2 million tons at 5.7 g t^?1 gold and 41.5 g t^?1 silver at a cut‐off of 4 g t^?1 Au, which equates to approximately 12.5t of Au and 91.4t of Ag. The ore mineral assemblage of the Arinem vein consists of sphalerite, galena, chalcopyrite, pyrite, marcasite, and arsenopyrite with small amounts of pyrrhotite, argentite, electrum, bornite, hessite, tetradymite, altaite, petzite, stutzite, hematite, enargite, tennantite, chalcocite, and covellite. These ore minerals occur in quartz with colloform, crustiform, comb, vuggy, massive, brecciated, bladed and calcedonic textures and sulfide veins. A pervasive quartz–illite–pyrite alteration zone encloses the quartz and sulfide veins and is associated with veinlets of quartz–calcite–pyrite. This alteration zone is enveloped by smectite–illite–kaolinite–quartz–pyrite alteration, which grades into a chlorite–smectite–kaolinite–calcite–pyrite zone. Early stage mineralization (stage I) of vuggy–massive–banded crystalline quartz‐sulfide was followed by middle stage (stage II) of banded–brecciated–massive sulfide‐quartz and then by last stage (stage III) of massive‐crystalline barren quartz. The temperature of the mineralization, estimated from fluid inclusion microthermometry in quartz ranges from 157 to 325°C, whereas the temperatures indicated by fluid inclusions from sphalerite and calcite range from 153 to 218 and 140 to 217°C, respectively. The mineralizing fluid is dilute, with a salinity <4.3 wt% NaCl equiv. The ore‐mineral assemblage and paragenesis of the Arinem vein is characteristically of a low sulfidation epithermal system with indication of high sulfidation overprinted at stage II. Boiling is probably the main control for the gold solubility and precipitation of gold occurred during cooling in stage I mineralization.     

Mineralogy of the Boroo Gold Deposit in the North Khentei Gold Belt,Central Northern Mongolia

Mineral assemblages and chemical compositions of ore minerals from the Boroo gold deposit in the North Khentei gold belt of Mongolia were studied to characterize the gold mineralization, and to clarify crystallization processes of the ore minerals. The gold deposit consists of low‐grade disseminated and stockwork ores in granite, metasedimentary rocks and diorite dikes. Moderate to high‐grade auriferous quartz vein ores are present in the above lithological units. The ore grades of the former range from about 1 to 3 g/t, and those of the latter from 5 to 10 g/t, or more than 10 g/t Au. The main sulfide minerals in the ores are pyrite and arsenopyrite, both of which are divisible into two different stages (pyrite‐I and pyrite‐II; arsenopyrite‐I and arsenopyrite‐II). Sphalerite, galena, chalcopyrite, and tetrahedrite are minor associated minerals, with trace amounts of bournonite, boulangerite, geerite, alloclasite, native gold, and electrum. The ore minerals in the both types of ores are variable in distribution, abundance and grain size. Four modes of gold occurrence are recognized: (i) “invisible” gold in pyrite and arsenopyrite in the disseminated and stockwork ores, and in auriferous quartz vein ores; (ii) microscopic native gold, 3 to 100 µm in diameter, that occurs as fine grains or as an interstitial phase in sulfides in the disseminated and stockwork ores, and in auriferous quartz vein ores; (iii) visible native gold, up to 1 cm in diameter, in the auriferous quartz vein ores; and (iv) electrum in the auriferous quartz vein ores. The gold mineralization of the disseminated and stockwork ores consists of four stages characterized by the mineral assemblages of: (i) pyrite‐I + arsenopyrite‐I; (ii) pyrite‐II + arsenopyrite‐II; (iii) sphalerite + galena + chalcopyrite + tetrahedrite + bournonite + boulangerite + alloclasite + native gold; and (iv) native gold. In the auriferous quartz vein ores, five mineralization stages are defined by the following mineral assemblages: (i) pyrite‐I; (ii) pyrite‐II + arsenopyrite; (iii) sphalerite + galena + chalcopyrite; (iv) Ag‐rich tetrahedrite‐tennantite + bournonite + geerite + native gold; and (v) electrum. The As–Au relations in pyrite‐II and arsenopyrite suggest that gold detected as invisible gold is mostly attributed to Au⁺¹ in those minerals. By applying the arsenopyrite geothermometer to arsenopyrite‐II in the disseminated and stockwork ores, crystallization temperature and logfs₂ are estimated to be 365 to 300 °C and –7.5 to –10.1, respectively.     

The early Cambrian Chahmir shale-hosted Zn–Pb deposit,Central Iran: an example of vent-proximal SEDEX mineralization

The Chahmir zinc–lead deposit (1.5 Mt @ 6 % Zn + 2 % Pb) in Central Iran is one among several sedimentary-exhalative Zn–Pb deposits in the Early Cambrian Zarigan–Chahmir basin (e.g., Koushk, Darreh-Dehu, and Zarigan). The deposit is hosted by carbonaceous, fine-grained black siltstones, and shales interlayered with volcaniclastic sandstone beds. It corresponds to the upper part of the Early Cambrian volcano-sedimentary sequence (ECVSS), which was deposited on the Posht-e-Badam Block during back-arc rifting of the continental margin of Central Iran. Based on crosscutting relationships, mineralogy, and texture of sulfide mineralization, four different facies can be distinguished: stockwork (feeder zone), massive ore, bedded ore, and distal facies (exhalites with barite). Silicification, carbonatization, sericitization, and chloritization are the main wall-rock alteration styles; alteration intensity increases toward the proximal feeder zone. Fluid inclusion microthermometry was carried out on quartz associated with sulfides of the massive ore. Homogenization temperatures are in the range of 170–226 °C, and salinity is around 9 wt% NaCl eq. The size distribution of pyrite framboids of the bedded ore facies suggests anoxic to locally suboxic event for the host basin. δ³⁴S_(V-CDT) values of pyrite, sphalerite, and galena range from +10.9 to +29.8?‰. The highest δ³⁴S values correspond to the bedded ore (+28.6 to +29.8?‰), and the lowest to the massive ore (+10.9 to +14.7?‰) and the feeder zone (+11.3 and +12.1?‰). The overall range of δ³⁴S is consistent with a sedimentary environment where sulfide sulfur was derived from two sources. One of them was corresponding to early ore-stage sulfides in bedded ore and distal facies, consistent with bacterial reduction from coeval seawater sulfate in a closed or semiclosed basin. However, the δ³⁴S values of late ore-stage sulfides, observed mainly in massive ore, interpreted as a hydrothermal sulfur component, leached from the lower part of the ECVSS. Sulfur isotopes, along with the sedimentological, textural, mineralogical, fluid inclusion, and geochemical characteristics of the Chahmir deposit are in agreement with a vent-proximal (Selwyn type) SEDEX ore deposit model.