The Koklan W–Mo Deposit,Transuralia: Mineralogical–Geochemical Zoning

Geology of Ore Deposits - The Koklan W–Mo deposit in Transuralia is confined to the eponymous Middle Permian leucogranitic pluton, which intrudes a sequence of the Lower Paleozoic crystalline...     

Re–Os geochronology of Cu and W–Mo deposits in the Balkhash metallogenic belt, Kazakhstan and its geological significance

The Central Asian metallogenic domain (CAMD) is a multi-core metallogenic system controlled by boundary strike-slip fault systems. The Balkhash metallogenic belt in Kazakhstan, in which occur many large and super-large porphyritic Cu–Mo deposits and some quartz vein- and greisen-type W–Mo deposits, is a well-known porphyritic Cu–Mo metallogenic belt in the CAMD. In this paper 11 molybdenite samples from the western segment of the Balkhash metallogenic belt are selected for Re–Os compositional analyses and Re–Os isotopic dating. Molybdenites from the Borly porphyry Cu deposit and the three quartz vein-greisen W–Mo deposits—East Kounrad, Akshatau and Zhanet—all have relatively high Re contents (2712–2772 μg/g for Borly and 2.267–31.50 μg/g for the other three W–Mo deposits), and lower common Os contents (0.670–2.696 ng/g for Borly and 0.0051–0.056 ng/g for the other three). The molybdenites from the Borly porphyry Cu–Mo deposit and the East Kounrad, Zhanet, and Akshatau quartz vein- and greisen-type W–Mo deposits give average model Re–Os ages of 315.9 Ma, 298.0 Ma, 295.0 Ma, and 289.3 Ma respectively. Meanwhile, molybdenites from the East Kounrad, Zhanet, and Akshatau W–Mo deposits give a Re–Os isochron age of 297.9 Ma, with an MSWD value of 0.97. Re–Os dating of the molybdenites indicates that Cu–W–Mo metallogenesis in the western Balkhash metallogenic belt occurred during Late Carboniferous to Early Permian (315.9–289.3 Ma), while the porphyry Cu–Mo deposits formed at 316 Ma, and the quartz vein-greisen W–Mo deposits formed at 298 Ma. The Re–Os model and isochron ages thus suggest that Late Carboniferous porphyry granitoid and pegmatite magmatism took place during the late Hercynian movement. Compared to the Junggar-East Tianshan porphyry Cu metallogenic belt in northwestern China, the formation of the Cu–Mo metallogenesis in the Balkhash metallogenic belt occurred between that of the Tuwu-Yandong in East Tianshan and the Baogutu porphyry Cu deposits in West Junggar. Collectively, the large-scale Late Carboniferous porphyry Cu–Mo metallogenesis in the Central Asian metallogenic domain is related to Hercynian tectono-magmatic activities.     

K–Ar ages of plutonism and mineralization at the Shizhuyuan W–Sn–Bi–Mo deposit,Hunan Province,China

The Qianlishan granite complex, situated 16 km southeast of Chenzhou City, Hunan Province, China, hosts the Shizhuyuan W–Sn–Bi–Mo deposit. This complex, which intruded the Protozoic metasedimentary rocks and the Devonian clastic sedimentary and carbonate rocks, consists of mainly medium- to coarse-grained biotite granites and minor amounts of fine-grained biotite granite in addition to granite and quartz porphyry. K–Ar ages suggest three episodes of plutonism: the medium- to coarse-grained biotite granite (before 152 Ma), the fine-grained biotite granite (137 Ma), and the granite porphyry (129–131 Ma). Muscovite ages of the greisen are 145–148 Ma, suggesting that the W–Sn–Bi–Mo mineralization was related to the main, medium- to coarse-grained biotite granites. The K–Ar age of the hydrothermal vein mineralization is 92 Ma and is probably related to the porphyries.     

Magmatic–hydrothermal processes in Sangdong W–Mo deposit,Korea: Study of fluid inclusions and 39Ar–40Ar geochronology

The Sangdong scheelite–molybdenite deposit in northeast South Korea consists of strata-bound orebodies in intercalated carbonate-rich layers in the Cambrian Myobong slate formation. Among them, the M1 layer hosts the main orebody below which lie layers of F1–F4 host footwall orebodies. Each layer was first skarnized with the formation of a wollastonite + garnet + pyroxene assemblage hosting minor disseminated scheelite. The central parts of the layers were subsequently crosscut by two series of quartz veining events hosting minor scheelite and major scheelite–molybdenite ores, respectively. The former veins associate amphibole–magnetite (amphibole) alteration, whereas the latter veins host quartz–biotite–muscovite (mica) alteration. Deep quartz veins with molybdenite mineralization are hosted in the Cambrian Jangsan quartzite formation beneath the Myobong formation. In the Sunbawi area, which is in close proximity to the Sangdong deposit, quartz veins with scheelite mineralization are hosted in Precambrian metamorphic basement. Three muscovite ³⁹Ar–⁴⁰Ar ages between 86.6 ± 0.2 and 87.2 ± 0.3 Ma were obtained from M1 and F2 orebodies from the Sangdong deposit and Sunbawi quartz veins. The Upper Cretaceous age of the orebodies is concordant with the published ages of the hidden Sangdong granite, 87.5 ± 4.5 Ma. This strongly suggests that the intrusion is causative for the Sangdong W–Mo ores and Sunbawi veins.Fluid inclusions in the quartz veins from the M1 and F2 orebodies, the deep quartz-molybdenite veins, and the Sunbawi veins are commonly liquid-rich aqueous inclusions having bubble sizes of 10–30 vol%, apparent salinities of 2–8 wt% NaCl eqv., and homogenization temperatures of 180–350 °C. The densities of the aqueous inclusions are 0.70–0.94 g/cm³. No indication of fluid phase separation was observed in the vein. To constrain the formation depth in the Sangdong deposit, fluid isochores are combined with Ti–in–quartz geothermometry, which suggests that the M1 and F2 orebodies were formed at depths of 1–3 km and 5–6 km below the paleosurface, respectively. The similarity of the Cs (cesium) concentrations and Rb/Sr ratios in the fluid inclusions of the respective orebodies indicate an origin from source magmas having similar degrees of fractionation and enrichment of incompatible elements such as W and Mo. High S concentrations in the fluids and possibly organic C in the sedimentary source likely promoted molybdenite precipitation in the Sangdong orebodies, whereas the scheelite deposition in the deep quartz–molybdenite veins hosted in the quartzite is limited by a lack of Ca and Fe in the hydrothermal fluids. The molybdenite deposition in the Sunbawi quartz–molybdenite veins hosted in the Precambrian metamorphic basement rocks was possibly limited by a lack of reducing agents such as organic C.     

Mineral Associations and Mo–W Ore Types of the Slepaya Zalezh’ Orebody at the Tyrnyauz Deposit

Geology of Ore Deposits - Slepaya Zalezh’, the largest orebody of the Tyrnyauz Mo–W deposit, is considered a first-priority object should mining operations at the deposit be resumed....     

Genesis of the Au–Bi–Cu–As, Cu–Mo ± W, and base–metal Au–Ag mineralization at the Mountain Freegold (Yukon, Canada): constraints from Ar–Ar and Re–Os geochronology and Pb and stable isotope compositions

The genesis of mineralized systems across the Mountain Freegold area, in the Dawson Range Cu–Au?±?Mo Belt of the Tintina Au province was constrained using Pb and stable isotope compositions and Ar–Ar and Re–Os geochronology. Pb isotope compositions of sulfides span a wide compositional range (²⁰⁶Pb/²⁰⁴Pb, 18.669–19.861; ²⁰⁸Pb/²⁰⁴Pb, 38.400–39.238) that overlaps the compositions of the spatially associated igneous rocks, thus indicating a magmatic origin for Pb and probably the other metals. Sulfur isotopic compositions of sulfide minerals are broadly similar and their δ³⁴S (Vienna-Canyon Diablo Troilite (V-CDT)) values range from ?1.4 to 3.6 ‰ consistent with the magmatic range, with the exception of stibnite from a Au–Sb–quartz vein, which has δ³⁴S values between ?8.1 and ?3.1 ‰. The δ³⁴S values of sulfates coexisting with sulfide are between 11.2 and 14.2 ‰; whereas, those from the weathering zone range from 3.7 to 4.3 ‰, indicating supergene sulfates derived from oxidation of hypogene sulfides. The δ¹³C (Vienna Peedee Belemnite (VPDB)) values of carbonate range from ?4.9 to 1.1 ‰ and are higher than magmatic values. The δ¹⁸O (V-SMOW) values of magmatic quartz phenocrysts and magmatic least-altered rocks vary between 6.2 and 10.1 ‰ and between 5.0 and 10.1 ‰, respectively, whereas altered magmatic rocks and hydrothermal minerals (quartz and magnetite) are relatively ¹⁸O-depleted (4.2 to 7.9 ‰ and ?6.3 to 1.5 ‰, respectively). Hydrogen isotope compositions of both least-altered and altered igneous rock samples are D-depleted (from ?133 to ?161 ‰ Vienna-Standard Mean Ocean Water (V-SMOW)), consistent with differential magma degassing and/or post-crystallization exchange between the rocks and meteoric ground water. Zircon from a chlorite-altered dike has a U–Pb crystallization age of 108.7?±?0.4 Ma; whereas, the same sample yielded a whole-rock Ar–Ar plateau age of 76.25?±?0.53 Ma. Likewise, molybdenite Re–Os model ages range from 75.8 to 78.2 Ma, indicating the mineralizing events are genetically related to Late Cretaceous volcano-plutonic intrusions in the area. The molybdenite Re–Os ages difference between the nearby Nucleus (75.9?±?0.3 to 76.2?±?0.3 Ma) and Revenue (77.9?±?0.3 to 78.2?±?0.3 Ma) mineral occurrences suggests an episodic mineralized system with two pulses of hydrothermal fluids separated by at least 2 Ma. This, in combination with geological features suggest the Nucleus deposit represents the apical and younger portion of the Revenue–Nucleus magmatic-hydrothermal system and may suggest an evolution from the porphyry to the epithermal environments.     

In-situ LA-ICPMS trace elements and U–Pb analysis of titanite from the Mesozoic Ruanjiawan W–Cu–Mo skarn deposit,Daye district,China

In this paper, we present U–Pb ages and trace element compositions of titanite from the Ruanjiawan W–Cu–Mo skarn deposit in the Daye district, eastern China to constrain the magmatic and hydrothermal history in this deposit and provide a better understanding of the U–Pb geochronology and trace element geochemistry of titanite that have been subjected to post-crystallization hydrothermal alteration. Titanite from the mineralized skarn, the ore-related quartz diorite stock, and a diabase dike intruding this stock were analyzed using laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS). Titanite grains from the quartz diorite and diabase dike typically coexist with hydrothermal minerals such as epidote, sericite, chlorite, pyrite, and calcite, and display irregular or patchy zoning. These grains have low LREE/HREE and high Th/U and Lu/Hf ratios, coupled with negative Eu and positive Ce anomalies. The textural and compositional data indicate that titanite from the quartz diorite has been overprinted by hydrothermal fluids after being crystallized from magmas. Titanite grains from the mineralized skarn are texturally equilibrated with retrograde skarn minerals including actinolite, quartz, calcite, and epidote, demonstrating that these grains were formed directly from hydrothermal fluids responsible for the mineralization. Compared to the varieties from the quartz diorite stock and diabase dike, titanite grains from the mineralized skarn have much lower REE contents and LREE/HREE, Th/U, and Lu/Hf ratios. They have a weighted mean ²⁰⁶Pb/²³⁸U age of 142 ± 2 Ma (MSWD = 0.7, 2σ), in agreement with a zircon U–Pb age of 144 ± 1 Ma (MSWD = 0.3, 2σ) of the quartz diorite and thus interpreted as formation age of the Ruanjiawan W–Cu–Mo deposit. Titanite grains from the ore-related quartz diorite have a concordant U–Pb age of 132 ± 2 Ma (MSWD = 0.5, 2σ), which is 10–12 Ma younger than the zircon U–Pb age of the same sample and thus interpreted as the time of a hydrothermal overprint after their crystallization. This hydrothermal overprint was most likely related to the emplacement of the diabase dike that has a zircon U–Pb age of 133 ± 1 Ma and a titanite U–Pb age of 131 ± 2 Ma. The geochronological results thus reveal two hydrothermal events in the Ruanjiawan deposit: an early one forming the Wu–Cu–Mo ores related to the emplacement of the quartz diorite stock and a later one causing alteration of the quartz diorite and its titanite due to emplacement of diabase dike. It is suggested that titanite is much more susceptible to hydrothermal alteration than zircon. Results from this study also highlight the utilization of trace element compositions in discriminating titanite of magmatic and hydrothermal origins, facilitating a more reasonable interpretation of the titanite U–Pb ages.     

Metallogeny of the northeastern Gangdese Pb–Zn–Ag–Fe–Mo–W polymetallic belt in the Lhasa terrane,southern Tibet

The northeastern Gangdese Pb–Zn–Ag–Fe–Mo–W polymetallic belt (NGPB), characterized by skarn and porphyry deposits, is one of the most important metallogenic belts in the Himalaya–Tibetan continental orogenic system. This belt extends for nearly four hundred kilometers along the Luobadui–Milashan Fault in the central Lhasa subterrane, and contains more than 10 large ore deposits with high potential for development. Three major types of mineralization system have been identified: skarn Fe systems, skarn/breccia Pb–Zn–Ag systems, and porphyry/skarn Mo–Cu–W systems. In this study, we conducted a whole-rock geochemical, U–Pb zircon geochronological, and in situ zircon Hf isotopic study of ore-forming rocks in the NGPB, specifically the Jiangga, Jiaduopule, and Rema skarn Fe deposits, and the Yaguila Pb–Zn–Ag deposit. Although some of these deposits (porphyry Mo systems) formed during the post-collisional stage (21–14 Ma), the majority (these three systems) developed during the main (‘soft collision’) stage of the India–Asia continental collision (65–50 Ma). The skarn Fe deposits are commonly associated with granodiorites, monzogranites, and granites, and formed between 65 and 50 Ma. The ore-forming intrusions of the Pb–Zn–Ag deposits are characterized by granite, quartz porphyry, and granite porphyry, which developed in the interval of 65–55 Ma. The ore-forming porphyries in the Sharang Mo deposit, formed at 53 Ma. The rocks from Fe deposits are metaluminous, and have relatively lower SiO₂, and higher CaO, MgO, FeO contents than the intrusions associated with Mo and Pb–Zn–Ag mineralization, while the Pb–Zn–Ag deposits are peraluminous, and have high SiO₂ and high total alkali concentrations. They all exhibit moderately fractionated REE patterns characterized by lower contents of heavy REE relative to light REE, and they are enriched in large-ion lithophile elements and relatively depleted in high-field-strength elements. Ore-forming granites from Fe deposits display ⁸⁷Sr/⁸⁶Sr_(i) = 0.7054–0.7074 and ε_Nd(t) = − 4.7 to + 1.3, whereas rocks from the Yaguila Pb–Zn–Ag deposit have ⁸⁷Sr/⁸⁶Sr_(i) = 0.7266–0.7281 and ε_Nd(t) = − 13.5 to − 13.3. In situ Lu–Hf isotopic analyses of zircons from Fe deposits show that ε_Hf(t) values range from − 7.3 to + 6.6, with T_DM(Hf)^C model ages of 712 to 1589 Ma, and Yaguila Pb–Zn–Ag deposit has ε_Hf(t) values from − 13.9 to − 1.3 with T_DM(Hf)^C model ages of 1216 to 2016 Ma. Combined with existing data from the Sharang Mo deposit, we conclude that the ore-forming intrusions associated with the skarn Fe and porphyry Mo deposits were derived from partial melting of metasomatized lithospheric mantle and rejuvenated lower crust beneath the central Lhasa subterrane, respectively. Melting of the ancient continental material was critical for the development of the Pb–Zn–Ag system. Therefore, it is likely that the source rocks play an important role in determining the metal endowment of intrusions formed during the initial stage of the India–Asia continental collision.     

Geochronology and geochemistry of Late Cretaceous igneous intrusions and Mo–Cu–(W) mineralization in the southern Yidun Arc,SW China: Implications for metallogenesis and geodynamic setting

The Sanjiang Tethyan Metallogenic Domain (STMD) is an important part of the Tethyan giant metallogenic belt. The Yidun Arc is a part of the STMD in the eastern Tibetan Plateau. Recently, four newly discovered Mo–Cu–(W) ore deposits related to granitic intrusions were found distributed along the north-south strike in the southern Yidun Arc, which are identified as the Xiuwacu, Relin, Hongshan, and Tongchanggou deposits herein. These four deposits formed along high-angle north-northwest or north-west strike-slip faults, with vein-type and porphyry-type Mo–Cu mineralization developed in the intrusions. Molybdenite Re–Os and zircon U–Pb dating together with zircon Hf isotopes and whole-rock geochemistry of the intrusions were studied to discern the relationship between mineralization and magmatism, metallogenesis, and tectonic settings. Molybdenite from skarn-type mineralization at the Hongshan deposit has a Re–Os isochron age of 81.2 ± 2.6 Ma (MSWD = 1.3, n = 5) consistent with previously published zircon U–Pb ages and Re–Os ages of porphyry-type Mo mineralization. These results indicate that the Hongshan is a Late Cretaceous porphyry-skarn Cu–Mo deposit. Zircon U–Pb ages of the granitic intrusions in the Xiuwacu, Relin, and Tongchanggou deposits varying from ~ 87.4 Ma to ~ 82.7 Ma. Combined with published molybdenite Re–Os age spectrum (~ 85 Ma to ~ 81.2 Ma), it is proposed that the Mo–Cu–(W) mineralization in the Shangri-La region is spatially, temporally, and probably genetically related to the Late Cretaceous granitic intrusions. The Relin, Hongshan, and Tongchanggou intrusions have high SiO₂ (65.2–70.0 wt.%), Sr (363–905 ppm), Sr/Y (22–72), and La/Yb (37–69) ratios, and low Y (11.6–17.0 ppm) and Yb (0.97–1.59 ppm), which displayed adakitic affinities. Their low MgO (0.66–1.44 wt.%), Mg# (25–46), variable negative zircon ε_Hf(t) values (− 7.9 to − 2.3), and Proterozoic two-stages Hf model ages (T_DM2 = 1.13–1.62 Ga) suggest that they were probably dominantly derived from partial melting of thickened lower continental crust. According to the tectonic evolution of the Bangong Meso-Tethys Ocean during the Late Mesozoic, the Late Cretaceous igneous event and mineralization in the Yidun Arc likely formed under a late- or post-collision extensional environment, probably related to the collision between the Lhasa and Qiangtang terranes during the Late Cretaceous.     

LA–ICP–MS Isotopic U–Pb Age of Zircon from the Eldzhurty Granites and Rhyolites at the Tyrnyauz Mo–W Deposit (North Caucasus,Russia)

Doklady Earth Sciences - The isotopic U–Pb ages are estimated for zircons (for the first time by the LA–ICP–MS method) from biotite (Eldzhurty) granites and for the first time...     

Multiple Mesozoic porphyry-skarn Cu (Mo–W) systems in Yidun Terrane,east Tethys: Constraints from zircon U–Pb and molybdenite Re–Os geochronology

Porphyry Cu ± Mo ± Au deposits typically formed in volcanoplutonic arcs above subduction zones. However, there is increasing evidence for the occurrence of porphyry deposits related to magmas generated after the underplating arc has ceased. Post-subduction lithospheric thickening, lithospheric extension, or mantle lithosphere delamination could trigger the remelting of subduction-modified arc lithosphere and lead to the formation of post-subduction porphyry deposits. The NNW-trending Yidun Terrane, located in the eastern Tethys, experienced subduction of Garze–Litang oceanic plate (a branch of the Paleotethys) in the Late Triassic and witnessed two mineralization events respectively associated with the ca. 215 Ma arc-related intermediate–felsic porphyries and the 88–79 Ma mildly-alkaline granitic porphyries. It is, therefore, an ideal place to investigate the genetic linkage between the subduction-related porphyry deposits and post-subduction porphyry deposits. Our new in situ zircon U–Pb dating of the two granitic intrusions (biotite granite, 213.4 ± 0.9 Ma; monzogranite porphyry, 86.0 ± 0.4 Ma) in the Xiuwacu district, the molybdenite Re–Os age (84.7 ± 0.6 Ma) of the mineralization, and previously published geochronological data, together show the spatially overlapping distribution of the multiple Mesozoic porphyry systems in the Late Triassic Yidun arc system. Furthermore, the arc-like elemental signatures and the mixed Sr–Nd–Hf isotopic signatures of the Late Cretaceous ore-related porphyries (i.e., originating from a mixed components between the ∼215 Ma juvenile arc crust and the Mesoproterozoic mafic lower crust) indicate a genetic linkage between the Late Triassic and Late Cretaceous porphyry systems. This suggests that the remelting of underplated arc-related mafic rocks formed during the subduction of the Garze–Litang Ocean could be responsible for the mixing between the mantle-derived components and the Mesoproterozoic lower crustal materials, when post-subduction transtension occurred in the Late Cretaceous. The formation of the Late Cretaceous porphyry–skarn Cu–Mo–W deposits could most likely be related to the remelting of Late Triassic residual sulfide-bearing Cu-rich cumulates in the subduction-modified lower crust that triggered by the Late Cretaceous transtension.     

Genesis of the Huangshaping W–Mo–Cu–Pb–Zn polymetallic deposit in Southeastern Hunan Province,China: Constraints from fluid inclusions,trace elements,and isotopes

The Huangshaping polymetallic deposit is located in southeastern Hunan Province, China. It is a world-class W–Mo–Pb–Zn–Cu skarn deposit in the Nanling Range Metallogenic Belt, with estimated reserves of 74.31 Mt of W–Mo ore at 0.28% WO₃ and 0.07% Mo, 22.43 Mt of Pb–Zn ore at 3.6% Pb and 8.00% Zn, and 20.35 Mt of Cu ore at 1.12% Cu. The ore district is predominantly underlained by carbonate formations of the Lower Carboniferous period, with stocks of quartz porphyry, granite porphyry, and granophyre. Skarns occurred in contact zones between stocks and their carbonate wall rocks, which are spatially associated with the above-mentioned three types of ores (i.e., W–Mo, Pb–Zn, and Cu ores).Three types of fluid inclusions have been identified in the ores of the Huangshaping deposit: aqueous liquid–vapor inclusions (Type I), daughter-mineral-bearing aqueous inclusions (Type II), and H₂O–CO₂ inclusions (Type III). Systematic microthermometrical, laser Raman spectroscopic, and salinity analyses indicate that high-temperature and high-salinity immiscible magmatic fluid is responsible for the W–Mo mineralization, whereas low-temperature and low-salinity magmatic-meteoric mixed fluid is responsible for the subsequent Pb–Zn mineralization. Another magmatic fluid derived from deep-rooted magma is responsible for Cu mineralization.Chondrite-normalized rare earth element patterns and trace element features of calcites from W–Mo, Pb–Zn, and Cu ores are different from one another. Calcite from Cu ores is rich in heavy rare earth elements (187.4–190.5 ppm), Na (0.17%–0.19%), Bi (1.96–64.60 ppm), Y (113–135 ppm), and As (9.1–29.7 ppm), whereas calcite from W–Mo and Pb–Zn ores is rich in Mn (> 10.000 ppm) and Sr (178–248 ppm) with higher Sr/Y ratios (53.94–72.94). δ¹⁸O values also differ between W–Mo/Pb–Zn ores (δ¹⁸O = 8.10‰–8.41‰) and Cu ores (δ¹⁸O = 4.34‰–4.96‰), indicating that two sources of fluids were, respectively, involved in the W–Mo, Pb–Zn, and Cu mineralization.Sulfur isotopes from sulfides also reveal that the large variation (4‰–19‰) within the Huangshaping deposit is likely due to a magmatic sulfur source with a contribution of reduced sulfate sulfur host in the Carboniferous limestone/dolomite and more magmatic sulfur involved in the Cu mineralization than that in W–Mo and Pb–Zn mineralization. The lead isotopic data for sulfide (galena: ²⁰⁶Pb/²⁰⁴Pb = 18.48–19.19, ²⁰⁷/²⁰⁴Pb = 15.45–15.91, ²⁰⁸/²⁰⁴Pb = 38.95–39.78; sphalerite: ²⁰⁶Pb/²⁰⁴Pb = 18.54–19.03, ²⁰⁷/²⁰⁴Pb = 15.60–16.28, ²⁰⁸/²⁰⁴Pb = 38.62–40.27; molybdenite: ²⁰⁶Pb/²⁰⁴Pb = 18.45–19.21, ²⁰⁷/²⁰⁴Pb = 15.53–15.95, ²⁰⁸/²⁰⁴Pb = 38.77–39.58 chalcopyrite: ²⁰⁶Pb/²⁰⁴Pb = 18.67–19.38, ²⁰⁷/²⁰⁴Pb = 15.76–19.90, and ²⁰⁸/²⁰⁴Pb = 39.13–39.56) and oxide (scheelite: ²⁰⁶Pb/²⁰⁴Pb = 18.57–19.46, ²⁰⁷/²⁰⁴Pb = 15.71–15.77, ²⁰⁸/²⁰⁴Pb = 38.95–39.13) are different from those of the wall rock limestone (²⁰⁶Pb/²⁰⁴Pb = 18.34–18.60, ²⁰⁷/²⁰⁴Pb = 15.49–15.69, ²⁰⁸/²⁰⁴Pb = 38.57–38.88) and porphyries (²⁰⁶Pb/²⁰⁴Pb = 17.88–18.66, ²⁰⁷/²⁰⁴Pb = 15.59–15.69, ²⁰⁸/²⁰⁴Pb = 38.22–38.83), suggesting Pb²⁰⁶-, U²³⁸-, and Th ²³²-rich material are involved in the mineralization. The Sm–Nd isotopes of scheelite (ε_Nd(t) = − 6.1 to − 2.9), garnet (ε_Nd(t) = − 6.8 to − 6.1), and calcite (ε_Nd(t) = − 6.3) from W–Mo ores as well as calcite (ε_Nd(t) = − 5.4 to − 5.3) and scheelite (ε_Nd(t) = − 2.9) from the Cu ores demonstrate suggest more mantle-derived materials involved in the Cu mineralization.In the present study we conclude that two sources of ore-forming fluids were involved in production of the Huangshaping W–Mo–Pb–Zn–Cu deposit. One is associated with the granite porphyry magmas responsible for the W–Mo and then Pb–Zn mineralization during which its fluid evolved from magmatic immiscible to a magmatic–meteoritic mixing, and the other is derived from deep-rooted magma, which is related to Cu-related mineralization.     

Geology,mineralization, and fluid inclusion characteristics of the Chorukh-Dairon W–Mo–Cu skarn deposit in the Middle Tien Shan,Northern Tajikistan

The Chorukh-Dairon deposit is part of the metallogenic belt of WMo, CuMo, AuW, and Au deposits along the Late Paleozoic active continental margin of the Tien Shan. It is related to the Late Carboniferous multiphase pluton, with successive intrusive phases of early monzogabbro through monzonite-quartz monzonite to monzogranite and leucogranite, and the latest lamprophyre dikes. The deposit is an example of complex W–Mo–Cu magmatic-hydrothermal system related to magnetite-series shoshonitic igneous suite. It contains zones of W–Cu–Mo oxidized prograde and retrograde skarns, with abundant scapolite, plagioclase, K-feldspar, andradite garnet, magnetite, as well as molybdoscheelite and minor chalcopyrite, and molybdenite. Skarns are overprinted by hydrosilicate alteration assemblages, with amphibole, chlorite, epidote, quartz, calcite, scapolite, albite, scheelite, and chalcopyrite, and are cut by quartz-carbonate-barite-fluorite-sulfide veins.The fluid evolution included a release of high temperature (~ 400–500 °C), high pressure (900–1100 to 700–800 bars), high salinity magmatic-hydrothermal aqueous chloride fluid, with its direct separation from crystallizing magma and formation of prograde and retrograde skarns. Fluid enrichment in Ca (up to 15–22 wt.% CaCl₂) at the retrograde skarn stage was possibly related to magmatic differentiation and provided intense molybdoscheelite deposition from a homogenous fluid. In contrast, hydrosilicate alteration assemblages were formed at lower temperatures (~ 350–400 °C) initially from a homogenous and then from a boiling Ca-rich (20–22 wt.% CaCl₂) magmatic-hydrothermal fluid, with the latter contributing to the most intense scheelite deposition. The stable isotope data (δ¹³C_CO2 = − 3.0 ± 0.5‰ and δ¹⁸О_H2O = + 6.5 ± 0.5‰, δ³⁴S = + 7.5 to + 7.7‰) obtained for the hydrosilicate stage minerals suggest significant fluid sourcing from magmatic and meteoric waters as well as from sedimentary rocks enriched in seawater sulfate, possibly evaporites, although a strongly homogenous character of the isotopic composition reveals intense isotope homogenization in a magmatic chamber. Some light sulfur isotope enrichment of sulfides from the quartz-carbonate-barite-fluorite-sulfide veins (δ³⁴S = + 6.0 to + 6.1‰) may be linked to the evolution of the magmatic source toward more mantle-related sulfur species, as these veins were formed after emplacement of the late mafic (lamprophyre) dikes.     

Review of Mesozoic multiple magmatism and porphyry Cu–Mo (W) mineralization in the Yidun Arc,eastern Tibet Plateau

The Yidun Arc was formed in response to the westward subduction of Garze–Litang Ocean (a branch of Paleotethys) in the Late Triassic, where abundant porphyry Cu–Mo deposits (221–213 Ma) developed along the regional NW–SE sinistral faults and emplaced in the southern portion of the arc. The ore-related porphyries are mostly metaluminous or slightly peraluminous, belonging to shoshonitic high-potassium calc-alkaline I-type granites, with ε_Hf(t) values of −6.64 to +4.12. The ore-bearing magmas were probably derived from the partial melting of subduction-metasomatic-enriched mantle, with the contamination of underplated mafic materials. The Late Cretaceous (88–80 Ma) highly fractionated I-type granite belt and related porphyry Cu–Mo deposits and magmatic-hydrothermal Cu–Mo–W deposits occur along approximately N–S-trending faults in the Yidun Arc. This belt extended across the Yidun Arc and Garze–Litang suture zone to the north and across the Yangtze Craton to the south, intruding the Late Triassic porphyry belt. The ore-related porphyries are characterized by high silica and high total alkalis, with enrichment in large ion lithophile elements (LILEs; Rb, U and K) and depletion in high field strength elements (HFSE; Nb, Ta, P and Ti) and Ba. They have lower ε_Hf(t) values varying from −9.55 to −2.75, and significant negative Eu anomalies, indicating that the ore-bearing porphyritic magmas originated from ancient middle-upper crust. Two-stage magmatism and mineralization were superimposed in the Xiangcheng-Shangri-La district. Some ore deposits comprise two episodes of magmatism and associated mineralization such as both 207 ± 3.0 Ma granodiorite and 82.1 ± 1.2 Ma monzogranite intruded in the Xiuwacu deposit, causing Cu–Mo–W polymetallic mineralization. To date, 11 Late Triassic porphyry Cu deposits (e.g. the Pulang giant deposit with 5.1 Mt Cu), and five Late Cretaceous porphyry Cu–Mo (W) deposits (e.g. Tongchanggou Mo deposit with 0.59 Mt Mo) have been evaluated in the Xiangcheng-Shangri-La district. The continuity and inheritance of multiphase magmatism and the new understanding of superimposed mineralization will help to guide future exploration.     

Re–Os and U–Pb geochronology of porphyry Mo deposits in central Jilin Province: Mo ore-forming stages in northeast China

Central Jilin Province lies along the eastern edge of the Xing–Meng orogenic belt of northeast China. At least 10 Mo deposits have been discovered in this area, making it the second-richest concentration of Mo resources in China. To better understand the formation and distribution of porphyry Mo deposits in the area, we investigated the geological characteristics of the deposits and applied zircon U–Pb and molybdenite Re–Os isotope dating to constrain the age of mineralization. Our new geochronological data show the following: the Jidetun Mo deposit yields molybdenite Re–Os model ages of 164.6–167.1 Ma, an isochron age of 168 ± 2.5 Ma, and a weighted mean model age of 165.9 ± 1.2 Ma; the Houdaomu Mo deposit yields molybdenite Re–Os model ages of 167.4–167.7 Ma, an isochron age of 168 ± 13 Ma, and a weighted mean model age of 167.5 ± 1.2 Ma; and the Chang’anpu Mo deposit yields a zircon U–Pb age for granodiorite porphyry of 166.9 ± 1.5 Ma (N = 16). These new age data, combined with existing molybdenite Re–Os dates, show that intense porphyry Mo mineralization was coeval with magmatism during the Middle Jurassic (167.8 ± 0.4 Ma, r > 0.999). The geotectonic mechanisms responsible for Mo mineralization were probably related to subduction of the Palaeo-Pacific plate beneath the Eurasian continent. Combining published molybdenite Re–Os and zircon U–Pb ages for northeast China, the Mo deposits are shown to have been formed during multiple events coinciding with periods of magmatic activity. We identified three phases of mineralization, two of which had several stages: the Caledonian (485–480 Ma); the Indosinian comprising the Early–Middle Triassic (248–236 Ma) and Late Triassic (226–208 Ma) stages; and the Yanshanian phase comprising the Early–Middle Jurassic (202–165 Ma), Late Jurassic–early Early Cretaceous (154–129 Ma), and Early Cretaceous (114–111 Ma) stages. Although Mo deposits formed during each phase/stage, most of the mineralization occurred during the Early–Middle Jurassic.     

Metallogenesis at the Carris W–Mo–Sn deposit (Gerês,Portugal): Constraints from fluid inclusions,mineral geochemistry,Re–Os and He–Ar isotopes

The Carris orebody consists of two partially exploited W–Mo–Sn quartz veins formed during successive shear stages and multipulse fluid fillings. They cut the Variscan post-D3 Gerês I-type granite. The most important ore minerals are wolframite, scheelite, molybdenite and cassiterite. There are two generations of wolframite. The earlier generation of wolframite is rare and has the highest WO₄Mn content (91 mol%) and the most common wolframite contains 26–57 mol% WO₄Mn. Re–Os dating of molybdenite from the ore quartz veins and surrounding granite yields ages of 279 ± 1.2 Ma and 280.3 ± 1.2 Ma, respectively which are in very good agreement with the previous ID-TIMS U–Pb zircon age for the Carris granite (280 ± 5 Ma).³He/⁴He ratio of pyrite ranging between 0.73 and 2.71 Ra (1 Ra = 1.39 × 10^− 6) and high ³He/³⁶Ar (0.8–5 × 10^− 3) indicate a mixture of a crustal radiogenic helium fluid with a mantle derived-fluid.The fluid inclusion studies on quartz intergrown with wolframite and scheelite, beryl and fluorite reveal that two distinct fluid types were involved in the genesis of this deposit. The first was a low to medium salinity aqueous carbonic fluid (CO₂ between 4 and 14 mol%) with less than 1.95 mol% N₂, which was only found in quartz associated with wolframite. The other was a low salinity aqueous fluid found in all the four minerals. The homogenization temperatures indicate minimum entrapment temperatures of 226–310 °C (average 280 °C) for the H₂O–CO₂–N₂–NaCl fluid and average temperatures of 266 °C for scheelite and 242 °C, 190 °C and 160 °C for the last generations of beryl, fluorite and quartz, respectively. It was estimated that wolframite was deposited ~ 7 km depth, assuming a lithostatic pressure, probably due to strong pressure fluctuation caused by seismic events triggered by brittle tectonics during the exhumation event. Precipitation of scheelite and sulphides took place later, at the same depth, but under a hydrostatic or suprahydrostatic pressure regime, and probably caused by mixing between the magmatic–hydrothermal fluid and meteoric waters that deeply penetrated the basement during post-Variscan decompression.     

The Late Early Cretaceous Mo Mineralization in the South China Mo Province: Constraints from U–Pb and Re–Os Geochronology of the Lufeng Porphyry Mo Deposit

Compared to other Mo provinces, few studies focused on the South China Mo Province(SCMP), especially for Early Cretaceous Mo mineralization. The Lufeng porphyry Mo deposit in the SCMP is characterized by disseminated and veinlet-type mineralization in granite porphyry, gneiss, and rhyolite. In this study, six molybdenite samples yield a Re–Os isochron age of 108.0±1.8 Ma, which is consistent with the zircon U–Pb age of the granite porphyry(108.4±0.8 Ma). The coincidence of magmatic and hydrothermal activities indicates that Mo mineralization was associated with the intrusion of granite porphyry during the late Early Cretaceous. A compilation of U–Pb and Re–Os chronological data suggests that an extensive and intensive Mo mineralization event occurred in the SCMP during the late Early Cretaceous. The marked difference in molybdenite Re contents between Cu-bearing(85–536 ppm) and Cu-barren(1.3–59 ppm) Mo deposits of the late Early Cretaceous indicates that the ore-forming materials were derived from strong crust–mantle interactions. Together with regional petrological and geochemical data, this study suggests that late Early Cretaceous Mo mineralization in the SCMP occurred in an extensional setting associated with the roll-back of the Paleo-Pacific slab.     

U–Pb Isotope Age of Zircon (LA–ICP–MS Method) from Magmatic Rocks and Some Aspects of the Genesis of the Tyrnyauz Mo–W Deposit (North Caucasus)

Geology of Ore Deposits - The authors' determinations of the U–Pb isotopic age of zircon (LA–ICP–MS method) in the main types of igneous rocks emphasize the presence of both...     

Re–Os and U–Pb geochronology of the Duobaoshan porphyry Cu–Mo–(Au) deposit,northeast China,and its geological significance

The large-scale Duobaoshan porphyry Cu–Mo–(Au) deposit is located at the north segment of the Da Hinggan Mountains, northeast China. Six molybdenite samples from the Duobaoshan deposit were selected for Re–Os isotope measurement to define the mineralization age of the deposit, yieldings a Re–Os isochron age of 475.9 ± 7.9 Ma (2σ), which is accordant with the Re–Os model ages of 476.6 ± 6.9–480.2 ± 6.9 Ma. This age is consistent with the age of the related granodiorite porphyry, which was dated as 477.2 ± 4 Ma by zircon U–Pb analysis using LA-ICP-MS. These ages disagree with the previous K–Ar age determinations that suggest a correlation of intrusive rocks of the Duobaoshan area with the Hercynian intrusive rocks of Carboniferous–Permian age. These ages demonstrate that the Duobaoshan granodiorite porphyry and related Cu–Mo deposit occurred in the Early Ordovician. The rhenium content of molybdenite varies from 290.9 to 728.2 μg/g, with an average content of 634.8 μg/g. The high rhenium content in molybdenite of the Duobaoshan deposit suggests that the ore-forming materials may be mainly of mantle source.