Kinematic analysis and palaeoseismology of the Edremit Fault Zone: evidence for past earthquakes in the southern branch of the North Anatolian Fault Zone,Biga Peninsula,NW Turkey

The Edremit Fault Zone (EFZ) forms one of the southern segments of the North Anatolian Fault Zone (NAFZ) at the northern margin of the Edremit Gulf (Biga Peninsula, South Marmara Region, Turkey). Stratigraphic, structural and kinematic results indicate that basinward younging of the fault zone, in terms of a rolling-hinge mechanism, has resulted in at least three discrete Miocene to Holocene deformational phases: the oldest one (Phase 1) directly related to the inactive Kazda? Detachment Fault, which was formed under N–S trending pure extension; Phase 2 is characterised by a strike-slip stress condition, probably related to the progression of the NAFZ towards the Edremit area in the Plio–Quaternary; and Phase 3 is represented by the high-angle normal faulting, which is directly interrelated with the last movement of the EFZ. Our palaeoseismic studies on the EFZ revealed the occurrence of three past surface rupture events; the first one occurred before 13178 BC, a penultimate event that may correspond to either the 160 AD or 253 AD historical earthquakes, and the youngest one can be associated with the 6 October 1944 earthquake (M_w = 6.8). These palaeoseismic data indicate that there is no systematic earthquake recurrence period on the EFZ.     

Probabilistic seismic hazard assessment for Lake Van basin,Turkey

The seismic hazard for the Lake Van basin is computed using a probabilistic approach, along with the earthquake data from 1907 to present. The spatial distribution of seismic events between the longitudes of 41–45° and the latitudes of 37.5–40°, which encompasses the region, indicates distinct seismic zones. The positions of these zones are well aligned with the known tectonic features such as the Tutak-Çald?ran fault zone, the Özalp fault zone, the Geva? fault zone, the Bitlis fault zone and Karl?ova junction where the North Anatolian fault zone and East Anatolian fault zone meet. These faults are known to have generated major earthquakes which strongly affected cities and towns such as Van, Mu?, Bitlis, Özalp, Muradiye, Çald?ran, Erci?, Adilcevaz, Ahlat, Tatvan, Geva? and Gürp?nar. The recurrence intervals of M _s ≥ 4 earthquakes were evaluated in order to obtain the parameters of the Gutenberg–Richter measurements for seismic zones. More importantly, iso-acceleration maps of the basin were produced with a grid interval of 0.05 degrees. These maps are developed for 100- and 475- year return periods, utilizing the domestic attenuation relationships. A computer program called Sistehan II was utilized to generate these maps.     

Tectonic structures across the East African Rift based on the source parameters of the 20 May 1990 M7.2 Sudan earthquake

Earthquakes in Kenya are common along the Kenya Rift Valley because of the slow divergent movement of the rift and hydrothermal processes in the geothermal fields. This implies slow but continuous radiation of seismic energy, which relieves stress in the subsurface rocks. On the contrary, the NW-SE trending rift/fault zones such as the Aswa-Nyangia fault zone and the Muglad-Anza-Lamu rift zone are the likely sites of major earthquakes in Kenya and the East African region. These rift/fault zones have been the sites of a number of strong earthquakes in the past such as the M _w = 7.2 southern Sudan earthquake of 20 May 1990 and aftershocks of M _w = 6.5 and 7.1 on 24 May 1990, the 1937 M _s = 6.1 earthquake north of Lake Turkana close to the Kenya-Ethiopian border, and the 1913 M _s = 6.0 Turkana earthquake, among others. Source parameters of the 20 May 1990 southern Sudan earthquake show that this earthquake consists of only one event on a fault having strike, dip, and rake of 315°, 84°, and ?3°. The fault plane is characterized by a left-lateral strike slip fault mechanism. The focal depth for this earthquake is 12.1 km, seismic moment M _o = 7.65 × 10¹⁹ Nm, and moment magnitude, M _w = 7.19 (?7.2). The fault rupture started 15 s earlier and lasted for 17 s along a fault plane having dimensions of ?60 km × 40 km. The average fault dislocation is 1.1 m, and the stress drop, ?σ, is 1.63 MPa. The distribution of historical earthquakes (M _w ≥ 5) from southern Sudan through central Kenya generally shows a NW-SE alignment of epicenters. On a local scale in Kenya, the NW–SE alignment of epicenters is characterized by earthquakes of local magnitude M _l ≤ 4.0, except the 1928 Subukia earthquake (M _s = 6.9) in central Kenya. This NW–SE alignment of epicenters is consistent with the trend of the Aswa-Nyangia Fault Zone, from southern Sudan through central Kenya and further southwards into the Indian Ocean. We therefore conclude that the NW–SE trending rift/fault zones are sites of strong earthquakes likely to pose the greatest earthquake hazard in Kenya and the East African region in general.     

四川芦山2013年Ms7.0地震发震构造初步研究

2013年4月20日8时2分,四川龙门山断裂带的雅安芦山发生Ms7.0级地震,震中位于芦山县太平镇和双石镇之间,震源深度13～14km,震中最大烈度达IX级。震中区野外调查发现,尽管房屋建筑损坏较严重,但这次地震没有产生明显的地表破裂构造,仅见少量的地裂缝和喷砂冒水现象。高分辨率遥感图像解译、主余震分布、震源机制解等综合分析认为,该地震是龙门山断裂带西南段一次独立的破裂事件,属于逆冲型地震,沿双石-大川断裂中南段发生破裂,主破裂面西倾,倾角33°～43°,推断芦山地震与龙门山构造带底部滑脱带(13～19km)断坡构造活动有关。历史上,沿双石-大川断裂发生至少2次Ms6～6.5级地震,由此认为芦山地震是龙门山断裂带西南段特征型地震,与汶川地震不同。原地地应力测量和监测数据表明这是汶川地震后龙门山断裂带西南段应力释放的结果。     

Neotectonics of Turkey – a synthesis

Abstract

Turkey forms one of the most actively deforming regions in the world and has a long history of devastating earthquakes. The belter understanding of its neotectonic features and active tectonics would provide insight, not only for the country but also for the entire Eastern Mediterranean region. Active tectonics of Turkey is the manifestation of collisional intracontinental convergence- and tectonic escape-related deformation since the Early Pliocene (~5 Ma). Three major structures govern the neotectonics of Turkey; they are dextral North Anatolian Fault Zone (NAFZ), sinistral East Anatolian Fault Zone (EAFZ) and the Aegean–Cyprean Arc. Also, sinistral Dead Sea Fault Zone has an important role. The Anatolian wedge between the NAFZ and EAFZ moves westward away from the eastern Anatolia, the collision zone between the Arabian and the Eurasian plates. Ongoing deformation along, and mutual interaction among them has resulted in four distinct neotectonic provinces, namely the East Anatolian contractional, the North Anatolian, the Central Anatolian ‘Ova’ and the West Anatolian extensional provinces. Each province is characterized by its unique structural elements, and forms an excellent laboratory to study active strike-slip, normal and reverse faulting and the associated basin formation. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Analysis of Ezinepazarı–Sungurlu Fault Zone (Turkey) using Landsat TM data and its kinematic implications

The study area is located between Çorum and Amasya along the Ezinepazar?–Sungurlu Fault Zone (ESFZ) which is regarded as the splay of the North Anatolian Fault Zone (NAFZ). By this study, the 1/25,000 scaled geological map of the study area was prepared, and its stratigraphic and tectonic characteristics were unraveled as a result of palaeontological and petrographical analyses of the samples collected from different rock units. Particularly, geologic ages of the Late Jurassic–Early Cretaceous Ferhatkaya and Carcurum and Middle Eocene Çekerek formations were provided from palaeontological determinations. Using Landsat TM and Shuttle Radar Topography Mission 3 (SRTM 3) data of the region, the borders between the rock units and the tectonic characteristics in the study area were clarified by spectral and spatial enhancement methods. Kinematic characteristics of ESFZ obtained from the young sedimentary rocks along both sides of the fault zone were also inferred in this study. Understanding the kinematic and geometrical characteristics of the faults is important in terms of the seismotectonics of the region. In the statistical study conducted on the basis of the directions of the lineaments indicates the highest concentrations in general between N 50° - 60° E and N 60° - 70° E. Band 7 of the study area was enlightened in SE direction taking into consideration the relation of the geologic structures in the region with NAFZ and ESFZ and their general strike directions. Along with the formation of NAFZ, the region has undergone a counterclockwise rotation of approximately 20°–30°, which has developed between the “splay” faults in the south block of that fault. These faults are strike-slip faults formed under the compressional regime roughly in a NW–SE direction. It is noted that this tectonic regime has developed under compression in NW–SE direction, which was dominant in similar kinematic analysis studies conducted on NAFZ.     

2012年缅甸德贝金M7.0地震及其地表破裂特征

文章以地质地貌与地震遗迹野外调查获得的第一手资料为基础,重点介绍了实皆断裂的活动习性、2012年地震产生的建筑物破坏与地震地表破裂带特征.实皆断裂是一条规模宏大,以右旋走滑为主的全新世活动断裂,其水平滑动速率为18～20 mm/a.历史上沿实皆断裂曾发生10余次7级以上强震,迄今保留有1839年曼德勒因瓦M 8、193...     

Seismogenic Structure of the April 20, 2013, Lushan Ms7 Earthquake in Sichuan

At 08:02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya'an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43°. It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone (13-19 km) of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.     

The Manyas fault zone (southern Marmara region,NW Turkey): active tectonics and paleoseismology

The Manyas fault zone (MFZ) is a splay fault of the Yenice Gönen Fault, which is located on the southern branch of the North Anatolian Fault System. The MFZ is a 38 km long, WNW–ESE-trending and normal fault zone comprised of three en-echelon segments. On 6 October 1964, an earthquake (Ms = 6.9) occurred on the Salur segment. In this study, paleoseismic trench studies were performed along the Salur segment. Based on these paleoseismic trench studies, at least three earthquakes resulting in a surface rupture within the last 4000 years, including the 1964 earthquake have been identified and dated. The penultimate event can be correlated with the AD 1323 earthquake. There is no archaeological and/or historical record that can be associated with the oldest earthquake dated between BP 3800 ± 600 and BP 2300 ± 200 years. Additionally, the trench study performed to the north of the Salur segment demonstrates paleoliquefaction structures crossing each other. The surface deformation that occurred during the 1964 earthquake is determined primarily to be the consequence of liquefaction. According to the fault plane slip data, the MFZ is a purely normal fault demonstrating a listric geometry with a dip of 64°–74° to the NNE.     

2010年青海玉树地震(Ms7.1)同震地表破裂及其与山脉隆升的关系

野外调查发现,2010年4月14日青海玉树Ms7.1级地震同震地表破裂带长约65km,破裂带走向为310°,破裂面向NE陡倾,地表破裂带由2部分组成,其中西侧部分长约19km,东侧部分长约30km,两者之间存在约15km的无破裂区。地表破裂以右阶雁行状破裂分布为主要特征,呈现左旋走滑性质,伴随有垂直位移。统计结果显示,同震地表破裂垂直位移 (dv)与水平位移 (dh)的比值在0.13~0.53之间,地貌累积dv与累积dh比值为0.27~0.63。同震dv/dh与地貌dv/dh的相似显示玉树南山的形成和玉树地震具有同样的运动学和动力学性质,玉树南山的形成是地质历史上沿玉树断裂多次类似于玉树地震的地震活动的结果,计算出需要1800~2600次地震才能造成玉树南山的隆升。前人研究本段断层地震复发周期为120~200年,计算出断层开始活动时间不晚于20万~40万年以前。     

Recent plumbing system of the Krakatau volcano revealed by teleseismic earthquake distribution

Spatial and temporal analysis of global seismological data 1964–2005 reveals a distinct teleseismic earthquake activity producing a columnar-like formation in the continental wedge between the Krakatau volcano at the surface and the subducting slab of the Indo-Australian plate. These earthquakes occur continuously in time, are in the body-wave (m _b) magnitude range 4.5–5.3 and in the depth range 1–100 km. The Krakatau earthquake cluster is vertical and elongated in the azimuth N30°E, suggesting existence of a deep-rooted fault zone cutting the Sunda Strait in the SSW-NNE direction. Possible continuation of the fault zone in the SW direction was activated by an intensive 2002/2003 aftershock sequence, elongated in the azimuth of N55°E. Beneath the Krakatau earthquake cluster, an aseismic gap exists in the Wadati-Benioff zone of the subducting plate at the depths 100–120 km. We interpret this aseismic gap as a consequence of partial melting inhibiting stress concentration necessary to generate stronger earthquakes, whereas the numerous earthquakes observed in the overlying lithospheric wedge beneath the volcano probably reflect magma ascent in the recent plumbing system of the Krakatau volcano. Focal depth of the deepest events (~100 km) of the Krakatau cluster constrains the location of the primary magma generation to greater depths. The ascending magmatic fluids stress fault segments within the Sunda Strait fault zone and change their friction parameters inducing the observed tectonic earthquakes beneath Krakatau.     

Teleseismic finite-fault inversion of two <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> = 6.4 earthquakes along the East Anatolian Fault Zone in Turkey: the 1998 Adana and 2003 Bingöl earthquakes

The East Anatolian Fault Zone is a continental transform fault accommodating westward motion of the Anatolian fault. This study aims to investigate the source properties of two moderately large and damaging earthquakes which occurred along the transform fault in the last two decades using the teleseismic broadband P and SH body waveforms. The first earthquake, the 27 June 1998 Adana earthquake, occurred beneath the Adana basin, located close to the eastern extreme of Turkey’s Mediterranean coast. The faulting associated with the 1998 Adana earthquake is unilateral to the NE and confined to depths below 15 km with a length of 30 km along the strike (53°) and a dipping of 81° SE. The fixed-rake models fit the data less well than the variable-rake model. The main slip area centered at depth of about 27 km and to the NE of the hypocenter, covering a circular area of 10 km in diameter with a peak slip of about 60 cm. The slip model yields a seismic moment of 3.5?×?10¹⁸ N-m (M_w???6.4). The second earthquake, the 1 May 2003 Bingöl earthquake, occurred along a dextral conjugate fault of the East Anatolian Fault Zone. The preferred slip model with a seismic moment of 4.1?×?10¹⁸ N-m (M_w???6.4) suggests that the rupture was unilateral toward SE and was controlled by a failure of large asperity roughly circular in shape and centered at a depth of 5 km with peak displacement of about 55 cm. Our results suggest that the 1998 Adana earthquake did not occur on the mapped Göksun Yakap?nar Fault Zone but rather on a SE dipping unmapped fault that may be a split fault of it and buried under the thick (about 6 km) deposits of the Adana basin. For the 2003 Bingöl earthquake, the final slip model requires a rupture plane having 15° different strike than the most possible mapped fault.     

Nonstationary electrical activity in the tectonosphere-atmosphere interface retrieving by multielectrode sensors: case study of three major earthquakes in Central Italy with M&gt;6

We present data analysis of multi-electrode measurements performed in the tectonosphere-atmosphere interface at Pizzoli and Chieti observatories located at distances 30–50 km and 90–110 km from earthquakes epicenters in Central Italy accordingly. Time intervals include 30 days of observations before earthquakes occurred on 24 August (M6.2), on 26 October (M6.1) and on 30 October, 2016 (M6.6). The recorded signals are two component time series with time step 1 s representing alternative and direct electromotive force components. Alternative electromotive force component in frequency band of 0.01 Hz to 4000 Hz is being recorded. Basic study has been carried out since 1989 at Kamchatka peninsula and since 2012 across Eurasia. The observation of nonstationary electric processes illustrates the nucleation of seismogenetic activity. We propose the hypothesis that nonstationary (sudden, abrupt in amplitude) electrical signals illustrate the proton permeability of rocks laying underneath the measuring sensor including a unique phenomenon of anomalous spontaneous deformation due to combination of proton environment and polymorphic transformation in condensed media. One of the interesting results is distinguishing the main zone of major earthquake nucleation which is corresponding as the earthquakes epicenters in Central Italy with M > 6. We suggest that by covering the northern, central and southern parts of Italy with a network of multi-electrode observatories near fault lines, towns and villages could pinpoint the possible coordinates of earthquake epicenter in a 30 day time window. The Chieti and Pizzoli observatories can form the basis of an extended network.     

The Bekten Fault: the palaeoseismic behaviour and kinematic characteristics of an intervening segment of the North Anatolian Fault Zone,Southern Marmara Region,Turkey

The Bekten Fault is 20-km long N55°E trending and oblique-slip fault in the dextral strike-slip fault zone. The fault is extending sub-parallel between Yenice-Gönen and Sar?köy faults, which forms the southern branch of North Anatolian Fault Zone in Southern Marmara Region. Tectonomorphological structures indicative of the recent fault displacements such as elongated ridges and offset creeks observed along the fault. In this study, we investigated palaeoseismic activities of the Bekten Fault by trenching surveys, which were carried out over a topographic saddle. The trench exposed the fault and the trench stratigraphy revealed repeated earthquake surface rupture events which resulted in displacements of late Pleistocene and Holocene deposits. According to radiocarbon ages obtained from samples taken from the event horizons in the stratigraphy, it was determined that at least three earthquakes resulting in surface rupture generated from the Bekten Fault within last ~1300 years. Based on the palaeoseismological data, the Bekten Fault displays non-characteristic earthquake behaviour and has not produced any earthquake associated with surface rupture for about the last 400 years. Additionally, the data will provide information for the role of small fault segments play except for the major structures in strike-slip fault systems.     

可可西里——东昆仑活动构造带强震活动研究

青海昆仑山口西 8.1级地震发生在具有新生性特征的可可西里—东昆仑活动断裂带上。该断裂带在 190 0年以来的 10 0多年中经历了一个强震活动过程。在该强震活动过程中 ,地震沿整个可可西里—东昆仑活动构造带分段破裂 ,强震的破裂长度和震级之间大致满足对数线性的统计关系 ,强震活动呈现指数型时间分布的加速特征。这种强震加速活动特征可以用含多个震源体的孕震系统的强震成组活动模型给予解释。     

The mechanism of induced seismicity at mosul reservoir based on the first motion analysis

In 1986 shortly after the impounding of Mosul reservoir, shallow earthquakes began occurring in the immediate reservoir vicinity, with magnitudes up to ML 3.0, at rates of up to 3 events per week. These events were almost certainly reservoir-induced and coincided with steadily increasing water levels. Cluster of epicenters was observed in the area located within a complex fault zone called the Sinjar-Dohouk-Kuchuk fault system. The presence of such fault system considers a potential source of earthquakes. A composite fault plane solution, based on first p-wave motion analyses, indicates that the mechanisms of seismicity were right-lateral strike-slip faulting along N44°E plane dipping 58° NW, in conformity with the local tectonics.     

The mechanism of induced seismicity at mosul reservoir based on the first motion analysis

In 1986 shortly after the impounding of Mosul reservoir, shallow earthquakes began occurring in the immediate reservoir vicinity, with magnitudes up to ML 3.0, at rates of up to 3 events per week. These events were almost certainly reservoir-induced and coincided with steadily increasing water levels. Cluster of epicenters was observed in the area located within a complex fault zone called the Sinjar-Dohouk-Kuchuk fault system. The presence of such fault system considers a potential source of earthquakes. A composite fault plane solution, based on first p-wave motion analyses, indicates that the mechanisms of seismicity were right-lateral strike-slip faulting along N44°E plane dipping 58° NW, in conformity with the local tectonics.     

Successive Extensional Tectonic Regimes during the Mesozoic as Evidenced by Neptunian Dikes in the Pontide Magmatic Arc,Northeast Turkey

The eastern Pontide magmatic arc extends ～600 km in an E-W direction along the Black Sea coast and was disrupted by a series of fault systems trending NE-SW, NW-SE, E-W, and N-S. These fault systems are responsible for the formation of diachronous extensional basins, rift or pull-apart, in the northern, southern, and axial zones of the eastern Pontides during the Mesozoic. Successive extensional or transtensional tectonic regimes caused the abortive Liassic rift basins and the Albian and Campanian pull-apart basins with deep-spreading troughs in the southern and axial zones. Liassic, Albian, and Campanian neptunian dikes, which indicate extensional tectonic regimes, crop out within the Paleozoic granites near Kale, Gumushane, and the Malm–Lower Cretaceous platform carbonates in Amasya and Gumushane. These neptunian dikes correspond to extensional cracks that are filled and overlain by the fossiliferous red pelagic limestones. Multidirectional Liassic neptunian dikes are consistent with the general trend of the paleofaults (NE-SW, NW-SE, and E-W), and active dextral North Anatolian fault (NAF) and sinistral Northeast Anatolian fault (NEAF) systems. The Albian neptunian dikes in Amasya formed in the synthetic oblique left-lateral normal faults of the main fault zone that runs parallel to the active North Anatolian fault zone (NAFZ).

Kinematic interpretation of the Liassic and Albian neptunian dikes suggests N-S extensional stress or northward movement of the Pontides along the conjugate fracture zones parallel to the NAFZ and NEAFZ. This northward movement of the Pontides in Liassic and Albian times requires left-lateral and right-lateral slips along the conjugate NAFZ and Northeast Anatolian fault zones (NEAFZ), respectively, in contrast to the recent active tectonics that have been accommodated by N-S compressional stress. On the other hand, mutual relationships between the neptunian dikes and the associated main fault zone of Campanian age extending in an E-W direction in the Kale area, Gumushane suggest the existence of a main left-lateral transtensional wrench zone. This system might be accommodated by the counterclockwise convergence of the Turkish plate with the Afro-Arabian plate relative to the Eurasian plate, and the southward oblique subduction of Paleotethys beneath the eastern Pontide magmatic arc during the Mesozoic.     

Neotectonics of Turkey – a synthesis

Turkey forms one of the most actively deforming regions in the world and has a long history of devastating earthquakes. The better understanding of its neotectonic features and active tectonics would provide insight, not only for the country but also for the entire Eastern Mediterranean region. Active tectonics of Turkey is the manifestation of collisional intracontinental convergence- and tectonic escape-related deformation since the Early Pliocene (∼5 Ma). Three major structures govern the neotectonics of Turkey; they are dextral North Anatolian Fault Zone (NAFZ), sinistral East Anatolian Fault Zone (EAFZ) and the Aegean–Cyprean Arc. Also, sinistral Dead Sea Fault Zone has an important role. The Anatolian wedge between the NAFZ and EAFZ moves westward away from the eastern Anatolia, the collision zone between the Arabian and the Eurasian plates. Ongoing deformation along, and mutual interaction among them has resulted in four distinct neotectonic provinces, namely the East Anatolian contractional, the North Anatolian, the Central Anatolian ‘Ova’ and the West Anatolian extensional provinces. Each province is characterized by its unique structural elements, and forms an excellent laboratory to study active strike-slip, normal and reverse faulting and the associated basin formation.     

Palaeomagnetic investigation of Cenozoic volcanic rocks bordering the North Anatolian Fault Zone,Reşadiye and Koyulhisar Districts,central-east Anatolia,Turkey

A palaeomagnetic study is reported from the lavas of Eocene, Miocene and Pliocene age cropping out immediately to the north of the North Anatolian Fault Zone (NAFZ) in the Re?adiye–Mesudiye region of central-eastern Anatolia. Rock magnetic investigations identify a high percentage of multi-domained magnetite as the dominant ferromagnet in these rocks and this probably accounts for a relatively poor response to alternating field and thermal demagnetisation. Thirty of 37 units yielded acceptable groupings of characteristic magnetisation directions. An earlier study indicated small anticlockwise crustal block rotation in this region since Upper Cretaceous times (D/I?=?347/50°), and our study indicates that this was overtaken by clockwise rotation in Eocene times (D/I?=?40/47°), although sample size control from the Palaeogene is poor. Results from later Miocene (D/I?=?2/62°) and Pliocene (D/I?=?0/53°) volcanic rocks indicate that no significant tectonic rotation has occurred in the north of the NAFZ in Neogene times. This contrasts with rotations in the weaker crust comprising the Anatolian collage south of the NAFZ, where differential and sometimes large anticlockwise rotations occurred during the latter part of the Neogene.