Environmental geological and geotechnical investigations related to the potential use of Ankara clay as a compacted landfill liner material, Turkey

Clay-bearing Upper Pliocene red clastics and Quaternary alluvial deposits occupy the Ankara basin. The clayey levels of the Upper Pliocene deposits, referred to as Ankara clay, is considered as a source for compacted clay liners due to their low coefficients of permeability and widespread distributions throughout Ankara. This study investigates the geological, geotechnical and mineralogical properties of the founding clayey soils at two sites of the Ankara region. The geotechnical index properties along with the hydraulic conductivities of the clayey soil samples collected from these sites were determined. A mathematical relation between the clay mineralogical content and hydraulic conductivity was established. The results of this investigation show that, from a geotechnical point of view, Ankara clay may be regarded as a highly suitable material for a compacted clay landfill liner given that its mineralogical compatibility with leachate is confirmed.     

含粘粒砂土抗液化性能的试验研究

通过对含粘粒砂土所作的试验研究, 包括: 粘粒矿物成分不同、粘粒含量不同的重塑土样所作的室内动三轴试验; X光衍射试验, 试验结果对比分析后, 得出了含粘粒砂土抗液化性能的特性。并得出以下结论: (1)粘粒矿物成分不同, 也引起砂土动力稳定性的变化; (2 )动剪应力强度与粘粒含量并非呈单调增加关系, 而呈抛物线型, 并给出回归方程; (3)含粘粒的砂土, 其抗液化能力最低点总是在粘粒含量 8.5～ 9.5 %之间。     

Flow dynamics at the origin of thin clayey sand lacustrine turbidites: Examples from Lake Hazar,Turkey

Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focused on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced thin beds. Depositional processes and sources for three of those eleven clusters are studied at three coring sites. Bathymetrical data and seismic reflection profiles are used to understand the specific geomorphology of each site. X‐ray, thin sections and CT scan imagery combined with grain‐size, geochemical and mineralogical measurements on the cores allow characterization of the turbidites. Turbidites included in each cluster were produced by remobilization of surficial slope sediment, a process identified in very few studies worldwide. Three types of turbidites are distinguished and compared with deposits obtained in flume studies published in the literature. Type 1 is made of an ungraded clayey silt layer issued from a cohesive flow. Type 2 is composed of a partially graded clayey sand layer overlain by a mud cap, attributed to a transitional flow. Type 3 corresponds to a graded clayey sand layer overlain by a mud cap issued from a turbulence‐dominated flow. While the published experimental studies show that turbulence is damped by cohesion for low clay content, type 3 deposits of this study show evidence for a turbulence‐dominated mechanism despite their high clay content. This divergence may in part relate to input variables, such as water chemistry and clay mineralogy, that are not routinely considered in experimental studies. Furthermore, the large sedimentological variety observed in the turbidites from one coring site to another is related to the evolution of a sediment flow within a field‐scale basin made of a complex physiography that cannot be tackled by flume experiments.     

The late Wisconsinan Savanna Terrace in tributaries to the upper Mississippi River

The Savanna Terrace, composed of alternating red and gray clayey sediments of late Wisconsinan age, can be found in five states along the upper Mississippi valley from Pepin County, Wisconsin, to Jackson County, Illinois. The terrace is the highest glaciofluvial-lacustrine deposit without a loess cover in the upper Mississippi valley. Chemical, physical, and mineralogical data show that two different sources provided sediment. The red clay is believed to have come from Lake Superior sources, while the gray clay is believed to have come from sources farther west. Large-scale flood events from glacial Lakes Agassiz, Grantsburg, and Superior were probably the main contributors of the sediments. The red clay in the terrace is similar in composition to red glaciolacustrine sediment found in eastern and northern Wisconsin. It also is mineralogically similar to the Hinckley Sandstone and the Fond du Lac Formation, which occur under and around Lake Superior. Radiocarbon dates obtained from the lower Illinois valley indicate that the terrace sediments were deposited sometime between about 13,100 and 9500 yr ago. Soils developed on the terrace are variable in their physical, chemical, and mineralogical properties, which reflect the composition of the clayey sediments.     

Rb-Sr geochronology of Vendian shales,the Staraya Rechka Formation,Anabar Massif,northern Siberia

Fine-grained clayey subfractions (SF) with particle sizes of 1–2, 0.6–1.0, 0.3–0.6, 0.2–0.3, 0.1–0.2, and <0.1 μm were extracted from shales of the Vendian Staraya Rechka Formation in the Anabar Massif and studied by XRD and Rb-Sr methods. All the clayey subfractions are represented by illite with high crystallinity indices, which are characteristic of the low-temperature diagenesis/catagenesis zone and grow with the decrease of the particle size. The Rb-Sr systematics in clayey subfractions combined with mineralogical data provide grounds for the conclusion that illite from clayey rocks of the Staraya Rechka Formation was forming during two periods: approximately 560 and 391–413 Ma ago. The first illite generation was likely formed in the course of lithostatic subsidence of the Staraya Rechka sediments and the second one, during the Devonian lithogenesis stage. It is assumed that age of the first generation (∼560 Ma) is close to that of the Staraya Rechka Formation. This inference is consistent with biostratigraphic, chemostratigraphic, and geochronological data obtained for both rocks of the Anabar Massif and Vendian sediments from other regions of Siberia.     

Palaeogeography and clay mineralogy of mid-Cretaceous flysches in the Gibraltar Arc area

A combined sedimentological and mineralogical study of several mid-Cretaceous sequences of the western Betic Cordillera and northern Rif has lead to the distinction of three main palaeogeographic areas. The basins of these areas received influxes of terrigenous sediments from different source areas. The southern Iberian margin was fed from the Iberian palaeocontinent and its clay-mineral association is characterized by a high content of well crystallized illite and kaolinite; the distal part of this margin was locally starved of continental sedimentation, but contains a considerable clayey contribution, probably oceanic in origin, made up mainly of smectites, illite and palygorskite. The sediments in the North African margin and the southern part of the North African Flysch Trough came from the African continent, the typical Aptian-Albian clay-mineral association being well crystallized illite, illite-smectite mixed layers, kaolinite, chlorite and lesser quantities of vermiculite. The terrigenous supply to the Mauritanian Realm of the North African Flysch Trough came from the Meso-Mediterranean terrane, and its usual Aptian-Albian clay association is illite, vermiculite, illite-smectite mixed layers and kaolinite. A significant change in the clay mineralogy occurred during the late Albian-early Cenomanian in the two former areas, consisting of a decrease in the detrital supply and a concomitant increase in smectites and palygorskite.The sedimentological and mineralogical evolution of this area was controlled by a combination of tectonic, eustatic and climatic changes in the westernmost Tethys during the mid-Cretaceous.     

A geological study of clayey laterite and clayey hydromorphic material of the region of Yaoundé (Cameroon): a prerequisite for local material promotion

A geological survey carried out in the Yaoundé (Cameroon) region has revealed the presence of homogeneous clayey laterite in the upper part of a laterite cover on interfluves, thickest on hills (780–800 m altitude) where ferricrete is absent, and clayey heterogeneous hydromorphic material in valleys. We present in this paper the physical, mineralogical and geochemical properties of these occurrences and discuss their potential as raw material for pottery, manufacture of bricks and tiles. These clayey raw materials are mostly made up of fine particles (ranging from 55 to 60% clay + silt in the clayey laterite, more than 70% clay + silt in the clayey hydromorphic material). Their chemical composition is characterized by silica (<60% SiO₂), alumina (<35% Al₂O₃) and iron (ranging from 3 to 14% Fe₂O₃). Their main clay minerals are disorganized and poorly crystallized kaolinites. The average limits of liquidity (44.56% versus 91.58%) and limits of plasticity (22.4 versus 45.93) revealed that clayey hydromorphic material has the greatest plasticity. The studied raw materials are suitable for making pottery as well as the manufacture of bricks and tiles. However, the high iron content in the clayey laterite (between 11 and 12% Fe₂O₃) prevents their efficient use in the manufacture of ceramics.     

Crack Initiation and Crack Propagation in Heterogeneous Sulfate-Rich Clay Rocks

Brittle fracture processes were hypothesized by several researches to cause a damage zone around an underground excavation in sulfate-rich clay rock when the stress exceeds the crack initiation threshold, and may promote swelling by crystal growth in newly formed fractures. In this study, laboratory experiments such as unconfined and confined compression tests with acoustic emission monitoring, and microstructural and mineralogical analyses are used to explain brittle fracture processes in sulfate-rich clay rock from the Gipskeuper formation in Switzerland. This rock type typically shows a heterogeneous rock fabric consisting of distinct clayey layers and stiff heterogeneities such as anhydrite layers, veins or nodules. The study showed that at low deviatoric stress, the failure behavior is dominated by the strength of the clayey matrix where microcracks are initiated. With increasing deviatoric stress or strain, growing microcracks eventually are arrested at anhydrite veins, and cracks develop either aligned with the interface between clayey layers and anhydrite veins, or penetrate anhydrite veins. These cracks often link micro-fractured regions in the specimen. This study also suggest that fracture localization in sulfate-rich clay rocks, which typically show a heterogeneous rock fabric, does not take place in the pre-peak range and renders unstable crack propagation less likely. Sulfate-rich clay rocks typically contain anhydrite veins at various scales. At the scale of a tunnel, anhydrite layers or veins may arrest growing fractures and prevent the disintegration of the rock mass. The rock mass may be damaged when the threshold stress for microcrack initiation is exceeded, thus promoting swelling by crystal growth in extension fractures, but the self-supporting capacity of the rock mass may be maintained rendering the possibility for rapidly propagating instability less likely.     

Clay and Marl Formation Susceptibility in Mila Province,Algeria

In Mila Province, Algeria (a.k.a Mila Wilaya), sensitive clays presenting shrinkage-swelling phenomena are widespread, covering large areas. Due to this, constructions and infrastructures sustainability built on such soils is questionable. Such clays sensitivity is amplified by seasonal rainfall deficits which reaches extreme magnitudes. In order to develop disasters’ prevention measures, we present in this work, areas mapping susceptible to shrinkage-swelling phenomenon by adopting a French method developed by B R G M. This method takes into account three measurable characteristics: i.e. lithological, mineralogical and geotechnical, of clayey formations identified in the studied sector. Based on these characteristics, three scores are attributed for each formation. Then, the susceptibility index is the obtained score average for each clayey formation. The susceptibility map is established on this index basis with three classes: low, medium, high.     

Lower riphean low-carbonaceous shales in the southern urals: Raw material for the manufacture of porous rubble

A property of swelling on heating to yield firm lightweight granules has first been revealed for lowcarbonaceous shales (LCS) from the Riphean stratotype in the Bashkirian Megaanticlinorium, Southern Urals. These granules possess all technological properties of “keramzite” or claydite (an artificial, expanded clayey material) and can successfully substitute this material. Moreover, the procedure of their manufacture, analogous to the manufacture of “shungizite” (an artificial carbonaceous-clayey material) from Lower Proterozoic clayey rocks of Karelia, is more economical than that for keramzit. Productive beds of the homogeneous LCS make up extended bodies tens of meters thick. At the present time, they can be used as cover rocks during the exploitation of the Bakal siderite deposits. The LCS represent fine-grained quartz-chlorite-sericite aggregates (with variable relationships between the major components), bearing fine-dispersed shungite in amounts of 0.5–1.0%. High-quality raw material of this kind is characterized by a fine-dispersed admixture of a mixed-layer clayey material bearing montmorillonite and vermiculite. Geological, lithological, mineralogical, and chemical prognostic criteria have been developed for the shungizite raw material. It has been concluded that this construction material, new for the Urals, is promising for industrial use     

Stabilization of clayey soils with Tunisian phosphogypsum: effect on geotechnical properties

Phosphogypsum and cement have been reported to improve the physicochemical properties of clayey soils. The present study aimed to investigate the behavior of various soils with different particle sizes and chemical and mineralogical compositions in the presence of phosphogypsum and cement mixed at various proportions. These hydraulic binders were assayed on three different soil samples, and their effects were examined using a battery of standardized tests, including the Atterberg limit, uniaxial compressive strength, Californian Bearing Rate (CBR) test, thermogravimetric analysis (TGA), microstructure observation (SEM), and X-ray diffraction tests. The results revealed a significant effect associated with the variation of phosphogypsum content in the soils. Keeping the cement content constant in the mixture, the continuous addition of phosphogypsum was noted to allow shifting the domain of plasticity to the highest water contents, which reduces the sensitivity of the soil to water and to increase the strength of soil. An increase of CBR index with the addition of phosphogypsum and cement is obtained. This treatment could have positively influenced the optimum moisture content and the maximal dry density. The mixture of soil-phosphogypsum and cement could give new forms such as ettringite and hydrate indicators of the improvement of the mechanical properties of the soil. This improvement varies from one soil to another, depending on its granularity and its mineralogy. The mineralogical composition of the soil, particularly kaolinite, amount, and size grading, have direct effects on the physical and mechanical properties of the soils under investigation.     

中文矿物命名中形容词修饰语的书写形式

本文对迄今在中文矿物命名中形容词修饰语的使用,及其书写形式的混乱状况进行了探讨,并分析了其原因。在此基础上提出了,关于中文矿物命名中形容词修饰语书写形式准则的具体建议。     

The effect of mineralogical and cationic heterogeneities on rheological properties of suspensions with Li-smectites, extracted from Volclay MX-80

The rheological study of colloidal suspensions contributes to the understanding of the aggregation phenomena of colloidal particles within a suspended fluid. The infra-2-μm (equivalent diameter) fraction of a bulk material, Volclay MX-80 bentonite was intensively analysed in order to understand the relative rheological data scattering observed with Li-smectite suspensions, prepared with the usual saturation procedure. A good mineralogical characterisation, especially for secondary minerals, coupled to a verification of cation exchanges on clayey fraction allowed us to propose a new way for investigating the observed differences of the bentonites rheological behaviour. Indeed, for a well Li-saturated smectite obtained from the purified infra-2-μm fraction, rheological data proved to be very accurate and perfectly reproducible. This emphasises the role of other minerals as well as the commonly observed discrepancy between the rheological behaviours of natural and industrial bentonites.     

黏土岩水力耦合特性试验研究

对于高放废物地质处置工程,地质屏障系统是放射性有害物质进入环境的最后一道屏障,也是一条重要防线。黏土岩由于其低渗透性、渗透损伤自修复以及较强的吸附能力等特性,被认为是一种合理的高放废物处置地质屏障。结合比利时正开展的黏土岩高放废物地质处置相关研究课题,通过一系列室内试验研究黏土岩的水力耦合机制及长期蠕变特性。三轴压缩试验表明,黏土岩压缩强度、超孔隙水压力与围压正相关。渗透试验表明,黏土岩渗透性呈现显著的各向异性特征,围压增大使黏土岩渗透性显著降低。蠕变试验表明,黏土岩蠕变变形、蠕变变形速率与载荷密切相关,即：载荷越大,黏土岩蠕变变形越显著,蠕变变形速率达到稳定所需的时间越长,且相应的稳态蠕变速率越大;根据应力阈值和等时曲线法初步确定该黏土岩长期强度在1.0～1.2 MPa。研究结果将为我国未来黏土岩高放废物处置库的选址和安全性评估提供重要科学依据。     

粘性土壤溶质运移新模型的应用

将Moldrup等提出的模拟水流和溶质运移的运动平均斜率模型和运动浓度斜率模型联合,模拟了重粘土在入渗和蒸发条件下的水盐动态并与特征-有限差分数值模型的计算结果进行了比较。在模拟过程中新模型显示出更加高效的优点,这对粘性土壤地区盐渍化趋势的长期预报具有重要的实际意义。     

Patterns of rare earth and other trace elements in Paleogene and Miocene clayey sediments from the Mondego platform (Central Portugal)

In the present study the origin of clay deposits occurring in an inland platform, in central Portugal, was investigated by their mineralogical and chemical composition. The clay deposits, exploited for ceramic industry are composed of silt-clay facies, the Monteira Member and the Arroça Member, which are assigned to the Coja Formation (Paleogene) and the Campelo Formation (Miocene), respectively. These clayey facies show almost compositional homogeneity, especially concerning texture. The mineralogical composition of the Monteira Member displays slightly higher content in smectite and interstratified clay minerals, which is supported by the chemical composition of samples analyzed. Both members present similar REE patterns, displaying an intense weathering record and little variation in the source area composition. Minor element geochemistry suggests low content in heavy minerals and transition metals. REE patterns and ratios of geochemical parameters support the dominant metasedimentary provenance, with a granite source contribution and also mature recycled sediments of continental origin. The study results’ suggest that the clays of these two members have the same source in terms of lithology and recycled sediments from the Hesperian massif. During the deposition of the Arroça Member, a major remobilization of the Monteira Member is suggested, explaining the geochemical similarity of both facies.     

Effect of sodium sulphate on the shear strength of clayey soils stabilised with additives

The effect of sulphates on the soil stabilisation using mineral additives such as lime, cement and fly ash has been reported by several researchers. The effect of sodium sulphate (Na₂SO₄) (0–6% by dry weight of soil) on the behaviour of the grey clayey soil (GS) and red clayey soil (RS) stabilised with lime (L) (0–8%), natural pozzolana (NP) (0–20%) and with a combination of lime-natural pozzolana (L–NP) was investigated. The soil specimens were subjected to testing of direct shear strength after 7, 30, 60 and 120 days of curing period. In the absence of Na₂SO₄, the results show that both clayey soils can be successfully stabilised with L or with a combination of L–NP, which substantially increases their shear strength and produces high values of shear parameters. However, at short curing period and for any content of Na₂SO₄, a further increase in shear strength and shear parameters is observed. Moreover, after 30 days of curing, the RS specimens stabilised with L or with NP alone are altered when the Na₂SO₄ is greater than 2%, whereas the GS specimens are not altered. However, the alteration of RS specimens is little when the L and NP are combined on curing with a high content of Na₂SO₄. Generally, the effect of Na₂SO₄ on both stabilised clayey soils depends on the curing time, percentage of additives used and their type, mineralogical composition of stabilised soils and Na₂SO₄ content.     

The Formation of Massive Sulfide Ores in Black Shales of the Eastern Caucasus: Evidence from the Kizil Dere Orefield

Issues pertaining to the genesis of massive sulfide deposits (Kizil Dere and others) embedded in Jurassic black shales of the eastern Caucasus are discussed on the basis of field materials. Major structural-dynamic constraints along with structural, lithological, and mineralogical indicators of the formation of such deposits have been established. These deposits are epigenetic objects formed during active deformations of clayey sequences and migration of metagenic waters over sources of deep ore-conducting fractures in structural and other traps. Therefore, they can be referred to the metagenic-hydrothermal type.     

Siderite layers in the fresh-water Neogene sediments of Vietnam

Siderites forming beds and lenses in the Neogene lacustrine—swampy sediments of the Rinh Chua Formation (northern Vietnam) are considered in detail. Results of the mineralogical and chemical study of siderites and host terrigenous–clayey siltstones are reported. New analytical data characterize the composition and structure of microbiomorphic (bacterial) bodies in the siderites and terrigenous sediments. Microstructures (porosity) and compositional peculiarities (up to 18% P₂O₅) of individual horizons of the sediments testify to their lacustrine-swampy genesis. It is established that the siderites in association with the layer silicates were formed during the microbiochemogenic decomposition of terrigenous components, including quartz.     

真空-堆载预压作用下软土蠕变特性试验研究

采用改进的、可施加负压的三轴仪开展了真空预压、堆载预压以及真空-堆载联合预压作用下软土的固结蠕变试验,描述了加载率、应力比和时间等对软土蠕变特性的影响,分析了轴向应变（率）、体积应变（率）及偏应变（率）与应力比和时间之间的关系。结果表明：轴向应变率和体积应变率与时间的对数关系并非线性,但经过若干天以后可近似认为是线性关系;在不同应力比n下,体应变与时间的关系可用双曲线方程来表示;偏应变、偏应变率与时间的关系符合双曲线方程,通过温州软黏土样的蠕变试验结果验证了其有效性。