Evolution of central eastern Australia during the late Palaeozoic and early Mesozoic

Palaeogeographic reconstructions and structural analysis of the Late Carboniferous to Triassic of central eastern Australia indicate that sedimentation and deformation were responses to the prolonged application of a dextral rotational force couple to the craton margin and to eustatic sea‐level changes. The force couple distorted the craton margins and adjacent Yarrol‐New England geosyncline and orogen into an incipient coupled orocline. The influence of the couple commenced in the Late Devonian and continued with varying effect until the Late Triassic, when it reversed to a sinistral system, part of a completely different stress regime that controlled sedimentation and structure during the Early Jurassic. Within the craton, deformation mainly took the form of a series of en echelon depressions, such as the Drummond Basin, Koburra, Denison and Taroom Troughs. A lineament between Longreach and Roma marks the southern boundary of this type of strain, although crust beyond its limit was not so rigid as to be unaffected by the force couple. The Yarrol‐New England region during the Devonian and the Early Carboniferous was the site of geosynclinal deposition where a thick and typically volcanogenic wedge lay along the eastern border of the craton. During the Late Carboniferous and Early Permian comparable wedges were formed farther to the east, in effect building outwards into the geosyncline. The same tensional regime that created the geosyncline is seen as the means for thinning crust below the sediment wedge and thus provided thermal instability, and for the igneous diapirism expressed as both intrusion and extrusion that characterizes the orogen from the Late Carboniferous onwards. The dextral force couple was responsible for most of the deformation and for controlling final emplacement of plutons. Sea‐level rises were marked in the late Early Permian and again in the early Late Permian.     

Alternating episodes of extension and contraction during the Triassic: evidence from Mesozoic sedimentary basins in eastern Australia

Triassic to Lower Cretaceous continental sedimentary basins occur in eastern Australia, but the tectonic and structural evolution of these basins is not fully understood. Using gridded aeromagnetic data, seismic reflection data and field observations, we conducted a structural analysis aimed at characterising major faults and deformation style in these sedimentary basins. Our results show evidence for two alternating episodes of rifting during the Triassic. An earlier episode of rifting, which took place in the Early Triassic to early Late Triassic, is inferred based on synsedimentary normal faults in the Nymboida Coal Measures and the boundary West Ipswich Fault System in the Esk Trough. This phase of rifting was followed by a contractional event that resulted in tilting, folding, and thrust faulting. Evidence of synsedimentary normal faults and bimodal volcanism indicates that another rifting phase occurred during the Late Triassic and resulted in the development of the Ipswich Basin. From the latest Late Triassic to the Early Cretaceous, the accumulation of continental sediments in the Clarence-Moreton Basin was accompanied by subsidence. We suggest that the alternating rifting episodes and contraction were ultimately controlled by plate boundary migration and switches between trench retreat and advance during the Triassic.     

Evolution of the Tasmanides,eastern Australia

The Beltana zinc‐lead deposit, the largest of several such small deposits in the Beltana area, owes its formation to intense localised marginal faulting and brecciation of Ajax Dolomite at its contact with the Beltana Diapir. Considerable frictional heat was generated by the upward movement of this diapir. The enormous stresses set up in it squeezed out hot interstitial saline mineralising fluids into the brecciated dolomite footwall to form initially a prominent lead arsenate‐rich horizon containing hedyphane, finnemanite, vanadinite and several minor components. Sporadic, but significant manganese mineralisation also occurred during this phase resulting in the precipitation of coronadite and hollandite. During the final and most prominent stage in the paragenetic sequence, the mineralising fluids became more siliceous and zinciferous leading to extensive replacement of earlier arsenates and precipitation of willemite. Late‐stage alteration is largely confined to the earlier arsenate‐rich zone, which has been carbonated and leached by meteoric waters.     

Petrographic variations within thick turbidite sequences: an example from the late Palaeozoic of eastern Australia

The subdivision of thick sequences of turbidite sediments has been problematical because of the monotonous nature of the units. One method, of using detailed detrital petrography for a large number of specimens, has delineated variations with a sequence of Late Palaeozoic age in eastern Australia. The rocks occur within a single structural block and are all members of one sedimentary petrographic province. They have been subdivided into three stratigraphic units (Moombil Beds, Brooklana Beds and Coramba Beds) and greywackes from these units are quartz-poor to quartz-intermediate, feldspathic or volcanolithic types. Dacitic volcanism has provided most of the detritus and the contribution from non-volcanic sources is small. The Coramba Beds are further subdivided into four petrographic units which are parallel to the stratigraphic boundaries. These lithostratigraphic units are based on the presence or absence of detrital hornblende, and the relative ratio of volcanic lithic fragments to feldspar. Vertical petrographic variations within the entire sequence indicate that although the acid volcanic source was predominant throughout the time of deposition, there is a noticeable increase in the contribution from intermediate-volcanic, acid-plutonic, low-grade metamorphic and sedimentary sources towards the top of the sequence. Detrital hornblende is also present in the upper parts of the sequence.     

美国得克萨斯古生界和中生界鲕粒的微孔隙度

本文所述的由1-5μm自形菱形方解石组成的微晶化鲕粒采自得克萨斯奥陶系-侏罗系的鲕粒灰岩和泥粒灰岩,其中:露头样品4个,岩心样品3个,岩屑样品7个。微晶化鲕粒的孔隙度可大于15%,渗透率为1毫达西.鲕粒的微晶化不是由淋滤作用所引起,而是在矿物稳定化过程中由文石转化而成方解石。     

Boron recycling in the continental crust of the central Andes from the Palaeozoic to Mesozoic, NW Argentina

Whole-rock chemical composition and ¹¹B/¹⁰B isotope ratios in tourmaline was investigated to study the geochemical recycling of boron during the evolution of the Andean basement from the Palaeozoic to Mesozoic. In the basement (Cambrian to Ordovician high-grade paragneisses, migmatites and orthogneisses, the Eocambrian Puncoviscana Formation, and Paleozoic-Mesozoic granitoid igneous rocks) whole-rock B contents are generally below 100 ppm, but B contents of ˜1 wt% are found in cogenetic aplite and pegmatite dikes and in tourmaline–quartz rocks. In the metasedimentary rocks, no systematic variation in B content because of metamorphic grade and no correlation of B with other incompatible elements are apparent. Tourmalines from the high-grade metamorphic basement yield δ¹¹B values ranging from −11.2 to −6.8‰ and isotope fractionation during migmatisation was small. Metamorphic tourmalines from the Puncoviscana Formation have δ¹¹B values between −6.3 and −5.8‰. The calculated (corrected for fractionation) δ¹¹B values of −6 to −2‰ for the sedimentary protolith of the metamorphic basement indicate a continental B source with subordinate marine input. Tourmalines from Palaeozoic and Mesozoic granitoids display an identical range of δ¹¹B values from −12 to −5.3‰ and indicate a similarly homogeneous B source throughout time. Tourmalines from pegmatites and tourmaline–quartz rocks record the average δ¹¹B values of the parental granitic magma. We assume that B in the Palaeozoic and Mesozoic granitoids is derived from the local metamorphic basement supporting the hypothesis that recycling of the lower Palaeozoic crust is the dominant process in granitic magma formation from Palaeozoic to Mesozoic. Received: 15 December 1999 / Accepted: 11 July 2000     

Palaeozoic suturing of eastern and western Tasmania in the west Tamar region: Implications for the tectonic evolution of southeast Australia

A new tectonic model for Tasmania incorporates subduction at the boundary between eastern and western Tasmania. This model integrates thin‐ and thick‐skinned tectonics, providing a mechanism for emplacement of allochthonous elements on to both eastern and western Tasmania as well as rapid burial, metamorphism and exhumation of high‐pressure metamorphic rocks. The west Tamar region in northern Tasmania lies at the boundary between eastern and western Tasmania. Here, rocks in the Port Sorell Formation were metamorphosed at high pressures (700–1400 MPa) and temperatures (400–500°C), indicating subduction to depths of up to 30 km. The eastern boundary of the Port Sorell Formation with mafic‐ultramafic rocks of the Andersons Creek Ultramafic Complex is hidden beneath allochthonous ?Mesoproterozoic turbidites of the Badger Head Group. At depth, this boundary coincides with the inferred boundary between eastern and western Tasmania, imaged in seismic data as a series of east‐dipping reflections. The Andersons Creek Ultramafic Complex was previously thought of as allochthonous, based mainly on associations with other mafic‐ultramafic complexes in western Tasmania. However, the base of the Andersons Creek Ultramafic Complex is not exposed and, given its position east of the boundary with western Tasmania, it is equally likely that it represents the exposed western edge of autochthonous eastern Tasmanian basement. A thin sliver of faulted and metamorphosed rock, including amphibolites, partially separates the Badger Head Group from the Andersons Creek Ultramafic Complex. Mafic rocks in this package match geochemically mafic rocks in the Port Sorell Formation. This match is consistent with two structural events in the Badger Head Group showing tectonic transport of the group from the west during Cambrian Delamerian orogenesis. Rather than being subducted, emplacement of the Badger Head Group onto the Andersons Creek Ultramafic Complex indicates accretion of the Badger Head Group onto eastern Tasmania. Subsequent folding and thrusting in the west Tamar region also accompanied Devonian Tabberabberan orogenesis. Reversal from northeast to southwest tectonic vergence saw imbricate thrusting of Proterozoic and Palaeozoic strata, possibly coinciding with reactivation of the suture separating eastern and western Tasmania.     

中国中生代沉积盆地演化

在综合分析中生代早-中三叠世、晚三叠世-早白垩世、晚白垩世-白垩纪3个时段中国沉积盆地分布、充填序列、岩相古地理和构造古地理的基础上, 建立了中国中生代沉积盆地的时空演化, 并探讨了中国中生代沉积盆地的时空演化与中生代构造运动的响应关系, 认为: (1)随着亚洲洋俯冲消亡及天山-兴蒙造山系形成, 中国北方地区总体处于古亚洲洋消亡以后, 陆块汇聚碰撞背景, 西北地区盆山格局基本定型, 南部古特提斯洋的双向俯冲消减, 在北羌塘-三江多岛弧盆系中的一系列弧后洋盆相继俯冲消亡; (2)晚三叠世的"印支运动"使古亚洲陆最终固结并向外增生, 中国己经基本形成了南海北陆的分布格局, 绝大部分地区进入陆内演化阶段.印支期以后, 华南中部上隆, 隔开了西部的古地中海域和东部的古太平洋海域; (3)中侏罗世以来, 在古太平洋板块向欧亚大陆俯冲的影响下, 整个中国东部卷入滨太平洋构造域, 西太平洋型活动大陆边缘形成.中国东北大部分地区为弧内裂陷(火山沉积)盆地; 华北-阿拉善陆块东西分化, 中西部主要发育压陷盆地或断陷盆地或坳陷盆地, 东部则形成与古太平洋板块俯冲有关的陆缘岩浆弧弧内裂陷盆地; 华南则以雪峰山为界, 东部广泛发育与陆缘岩浆弧演化相关的弧内裂陷盆地, 西侧则发育陆内大型压陷盆地、断陷盆地或断坳盆地.中国西南则仍然为多岛洋弧盆系格局.      

吉林省中东部晚中生代含煤地层中的木化石

通过对吉林省晚中生代含煤地层中木化石的系统调查，共采集162块木化石，均属裸子植物，共5属8种。其中出现频率最高者为异木属，其次为落羽杉型木属等，Taxadiorylon albertense，T．pseudonlbertense两种在中国为首次发现。笔者将木化石称Xenoxylon latiporosum-Taxodioxylon pseudoalbeltense组合。研究表明，异木属主要生长在温湿的温带气候环境；据目前的资料还不能证明该属是适应能力极强的树种。本文还记述了上述木化石产出的地质概况，并探讨了其地质意义和古环境。     

Chertification histories of some Late Mesozoic and Middle Palaeozoic platform carbonates

A consistent pattern for the silica sources, depositional environments and timing of chertification was observed in a diverse suite of five Late Mesozoic and Middle Palaeozoic carbonate sequences; the (1) Upper Greensand (Cretaceous) and (2) Portland Limestone (Jurassic) of southern England, (3) the Ramp Creek Formation (Mississippian) of southern Indiana, and the (4) lower Helderberg Group (Devonian) and (5) Onondaga Limestone (Devonian) of New York State. Nodular chert formation in all five limestone sequences occurred in sediments that were largely uncemented. Ghosts of pre-chertification carbonate cements are present in some chert nodules but are volumetrically minor. In every limestone sequence except the Upper Greensand, chertification occurred after burial to a depth sufficient for intergranular pressure solution and mechanical grain deformation of carbonate sand. Nodular chert is most abundant in subtidal, normal marine wackestones and mudstones that were deposited at or below fair-weather wave base, and is absent or rare in supratidal, intertidal and high-energy subtidal limestones and dolomites. An intraformational sponge spicule silica source for chert nodules is suggested by direct evidence, such as calcitized sponge spicules in the host limestone, and circumstantial evidence, such as ghosts of sponge spicules in chert nodules and a correlation of chert abundance with depositional environment. Most molds of siliceous sponge spicules were apparently obliterated by post-chertification intergranular compaction. We propose that these general trends for the depositional environments, silica sources and timing of chertification are representative of most Mesozoic to Middle Palaeozoic platform limestones.     

Boron metasomatism and behaviour of rare earth elements during formation of tourmaline rocks in the eastern Arunta Inlier,central Australia

Tourmaline rocks of previously unclear genesis and spatially associated with W- (Cu)-bearing calc-silicate rocks occur in Palaeoproterozoic supracrustal and felsic intrusive rocks in the Bonya Hills in the eastern Arunta Inlier, central Australia. Tourmalinisation of metapelitic host rocks postdates the peak of regional low-pressure metamorphism (M₁/D₁, ~500 °C, ~0.2 GPa), and occurred synkinematically between the two main deformation events D₁ and D₂, coeval with emplacement of Late Strangways (~1.73 Ga) tourmaline-bearing leucogranites and pegmatites. Tourmaline is classified as schorl to dravite in tourmaline–quartz rocks and surrounding tourmaline-rich alteration zones, and as Fe-rich schorl to foitite in the leucogranites. Boron metasomatism resulted in systematic depletion of K, Li, Rb, Cs, Mn and enrichment of B, and in some samples of Na and Ca, in the tourmaline rocks compared to unaltered metasedimentary host rocks. Whole-rock REE concentrations and patterns of unaltered schist, tourmalinised schist and tourmaline–quartz veins—the latter were the zones of influx of the boron-rich hydrothermal fluid—are comparable to those of post-Archaean shales. Thus, the whole-rock REE patterns of these rocks are mostly controlled by the metapelitic precursor. In contrast, REE concentrations of leucogranitic rocks are low (10 times chondritic), and their flat REE patterns with pronounced negative Eu anomalies are typical for fractionated granitic melts coexisting with a fluid phase. REE patterns for tourmalines separated from metapelite-hosted tourmaline–quartz veins and tourmaline-bearing granites are very different from one another but each tourmaline pattern mirrors the REE distribution of its immediate host rock. Tourmalines occurring in tourmaline–quartz veins within tourmalinised metasediments have LREE-enriched (La_N/Yb_N=6.3–55), shale-like patterns with higher REE (54–108 ppm). In contrast, those formed in evolved leucogranites exhibit flat REE patterns (La_N/Yb_N=1.0–5.6) with pronounced negative Eu anomalies and are lower in REE (5.6–30 ppm). We therefore conclude that REE concentrations and patterns of tourmaline from the different tourmaline rocks studied are controlled by the host rock and not by the hydrothermal fluid causing boron metasomatism. From the similarity of the REE pattern of separated tourmaline with the host rock, we further conclude that incorporation of REEs in tourmaline is not intrinsically controlled (i.e. by crystal chemical factors). Tourmaline does not preferentially fractionate specific REEs or groups of REEs during crystallisation from evolved boron- and fluid-rich granitic melts or during alteration of clastic metasediments by boron-rich magmatic-hydrothermal fluids.Editorial responsibility: J. Hoefs     

Palaeozoic synorogenic sedimentation in central and northern Australia: A review of distribution and timing with implications for the evolution of intracontinental orogens

The Palaeozoic Alice Springs Orogeny was a major intraplate tectonic event in central and northern Australia. The sedimentological, structural and isotopic effects of the Alice Springs Orogeny have been well documented in the northern Amadeus Basin and adjacent exhumed Arunta Inlier, although the full regional extent of the event, as well as lateral variations in timing and intensity are less well known. Because of the lack of regional isotopic data, we take a sedimentological approach towards constraining these parameters, compiling the location and age constraints of inferred synorogenic sedimentation across a number of central and northern Australian basins. Such deposits are recorded from the Amadeus, Ngalia, Georgina, Wiso, eastern Officer and, possibly, Warburton Basins. Deposits are commonly located adjacent to areas of significant basement uplift related to north‐south shortening. In addition, similar aged orogenic deposits occur in association with strike‐slip tectonism in the Ord and southern Bonaparte Basins of northwest Australia. From a combination of sedimentological and isotopic evidence it appears that localised convergent deformation started in the Late Ordovician in the eastern Arunta Inlier and adjacent Amadeus Basin. Synorogenic style sedimentation becomes synchronously widespread in the late Early Devonian and in most areas the record terminates abruptly close to the end of the Devonian. A notable exception is the Ngalia Basin in which such sedimentation continued until the mid‐Carboniferous. In the Ord and Bonaparte Basins there is evidence of two discrete pulses of transcurrent activity in the Late Devonian and Carboniferous. The sedimentological story contrasts with the isotopic record from the southern Arunta Inlier, which has generally been interpreted in terms of continuous convergent orogenic activity spanning most of the Devonian and Carboniferous, with a suggestion that rates of deformation increased in the mid‐Carboniferous. Either Carboniferous sediments have been stripped off by subsequent erosion, or sedimentation outpaced accommodation space and detritus was transported elsewhere.     

胶东中生代构造体制转折过程中流体演化和金的大规模成矿

胶东是我国最大的金矿产出集中区,依据矿床和矿点的密集程度,可分为招远-莱州-平度、蓬莱-栖霞、牟平-乳山三个成矿带,区域内金矿类型可主要分为石英脉型和蚀变岩型。高精度的单矿物 Ar-Ar、Rb-Sr 同位素及热液锆石离子探针测年研究业已证买,金成矿的时代为120±10Ma,金矿床载金矿物-黄铁矿、矿石-黄铁矿石英脉、控矿围岩-花岗岩和变质岩等及伴生脉岩的 Sr-Nd 放射性同位素研究也证明,金成矿物质具有多源性,既来自于控矿围岩-花岗岩和变质岩,又来自于幔源的岩浆岩,流体包裹体研究表明,各类金矿具有一致的成矿流体介质条件,为低盐度 H_2O-CO_2-NaCl±CH_4流体,金成矿温度、压力条件近似,主成矿温度为170～335℃,成矿压力为70～250MPa。氢氧等稳定同位素结果表明,成矿流体可能来源于与金矿床伴生的基性幔源岩浆脱水形成的岩浆水,但在地壳浅部遭受到大气降水的混合。因此,胶东各类型金矿是在同一成矿背景下形成的矿床,与区域内中生代构造体制转折作用有关,也是中生代构造体制转折的表现形式之一。     

Zircon ages and Hf isotopic compositions of Permian and Triassic A-type granites from central Inner Mongolia and their significance for late Palaeozoic and early Mesozoic evolution of the Central Asian Orogenic Belt

ABSTRACT

This work presents zircon ages and Hf-in-zircon isotopic data for Permian and Triassic A-type granitoids and reviews the evolution of central Inner Mongolia, China, during the early Permian and Late Triassic. SHRIMP U–Pb dating of zircons of peralkaline granites yielded ²⁰⁶Pb/²³⁸U ages of 294 ± 4 Ma and 293 ± 9 Ma that reflect the time of Permian magmatism. Zircon ages were also obtained for Late Triassic granites (226 ± 4 Ma, 224 ± 4 Ma). Our results, in combination with published zircon ages and geochemical data, document distinct magmatic episodes in central Inner Mongolia.

The Permian peralkaline granites show typical geochemical features of A-type granites, which also have highly positive zircon ε_Hf(t) values (+4.9 – +17.1), indicating a significant contribution of an isotopically depleted source, likely formed from mantle-derived magmas. Late Triassic A-type granitoids, however, in central Inner Mongolia show large variations and mostly positive in zircon ε_Hf(t) values (?1.3 – +13.5), suggesting derivation from a mixture of crust and mantle or metasomatized lithospheric mantle with crustal contamination. The geochemical characteristics of the Permian peralkaline granites and Late Triassic A-type granitoids are consistent with a post-collisional setting and were likely related to asthenosphere upwelling during the evolution of the Northern Block and Central Asian Orogenic Belt (CAOB).     

Evolution of the Peak Hill high-sulfidation epithermal Au–Cu deposit,eastern Australia

The early Palaeozoic Macquarie Arc, southeastern Australia, hosts a variety of major late Ordovician to earliest Silurian subduction-related deposits (e.g., Cadia East, Ridgeway, Cadia Hill, Cowal and Northparkes). However, there is uncertainty about whether coeval high-sulfidation epithermal deposits, which occur in intra-oceanic metallogenic belts elsewhere in the West Pacific, (e.g., Lepanto and Chinkuashih), are also present in the Macquarie Arc. This has led to suggestions that their absence may be due to the poor preservation potential of deposits that form at relatively shallow crustal levels in ancient rocks. We present here an interpretation for evolution of the Peak Hill Au–Cu deposit based on the distribution of alteration facies, sulfur isotope data from several textural forms of pyrite and barite, and an assessment of the regional volcanic and sedimentary facies architecture. These data show that the Peak Hill deposit displays a distinct sub-vertical zoning with a pyrophyllite and vuggy-quartz core, that today extends about 350 m east–west and at least 550 m north–south, which grades out through paragonite+muscovite, kaolinite to a chlorite+epidote alteration zone at the margin. The alteration zoning reflects both lower temperatures and neutralisation of acid fluids with increasing distance from the core, which represents the conduit along which hot acidic hydrothermal fluids were channelled. Several temporally overlapping events of silicification, bladed-quartz-pyrite veining, brecciation and pyrite veining occurred during the last stages of hydrothermal alteration, although most appear to predate mineralisation. Au–Cu mineralisation was associated with late quartz-pyrite-barite veins, and the highest gold grades occur mainly in microcrystalline-quartz-altered rocks in the paragonite+muscovite alteration zone, generally within 50 m outward from the boundary of the pyrophyllite and vuggy-quartz core. Sulfur- and lead-isotope data, and the characteristic zoning of ore minerals and alteration assemblages support a magmatic source for the hydrothermal fluids. Similarities in many of the isotopic signatures between Peak Hill and deposits such as Northparkes support generation of the high-sulfidation mineralisation during the Late Ordovician to earliest Silurian (possibly ca. 440 Ma) metallogenic event. The Late Ordovician to Early Silurian volcanic and sedimentary facies associations at Peak Hill are consistent with alteration and mineralisation occurring in rocks deposited in a submarine setting.     

Middle Proterozoic–early Palaeozoic evolution of central Baltoscandian intracratonic basins: evidence for asthenospheric diapirs

The three intracratonic sedimentary basins located in central Baltoscandinavia, namely the Bothnian Gulf basin, the Bothnian Sea basin and the Baltic basin, developed in response to Middle Proterozoic and Late Proterozoic tectonic events, separated in time by about 800 Ma. Only the Baltic basin was subsequently affected by Caledonian orogenesis and Mesozoic rifting. Crustal extension was minor or did not take place during the Proterozoic basin evolution phases. However, according to the Moho topography, crustal thinning did take place. This was probably a result of subcrustal magmatism. On a craton-wide scale, the ages of granitoids, which intruded during the Middle Proterozoic basin formation, generally decrease from east to west. This fact, combined with the evidence provided by mantle-derived flood basalt magmatism, points to a moving asthenospheric diapir as the cause for basin development. Asthenospheric upwelling was probably also responsible for the second, Late Proterozoic, basin evolution phase, as evidenced by the lack of crustal thinning and extension, and the occurrence of tholeiitic intrusions. In addition, a Late Proterozoic thermally induced palaeo-high, located at about the position of the intracratonic basins, is compatible with indications from glaciations. As the ages of Late Proterozoic intracratonic basins also decrease from east to west across the craton, the location of asthenospheric diapirism during this time interval was also moving. For the Fennoscandian lithosphere, the presence of fundamental lithospheric weakness zones (e.g. terrane boundaries) might be an explanation for the formation of two generations of basins originating from asthenospheric upwelling at about the same location in the Fennoscandian Shield. The spacing and size of the Proterozoic intracratonic basins suggest that the asthenospheric diapirism was not deep seated. Therefore, sublithospheric convective processes might be the cause for the asthenospheric upwellings. Such processes are related to Rayleigh–Taylor instabilities in the sublithospheric mantle. Emplacement of an asthenospheric diapir causes a thermal bulge at the surface of the lithosphere. Modelling results demonstrate that erosion of the surficial high, succeeded by cooling of the lithosphere, can explain the accumulation of early Palaeozoic sediments in the Bothnian Sea basin, taking into account post-Ordovician vertical and lateral erosion of the basin fill.     

Petrogenesis and tectonic implications of early Palaeozoic igneous rocks of the western South Qilian Belt,central China

Early Palaeozoic granitoids in the South Qilian Belt, central China, record details of the tectonic evolution and crustal growth of the Qilian orogenic belt. Five representative granitoids from the western South Qilian Belt were sampled for zircon LA-ICPMS U–Pb dating, Lu–Hf isotopes, and whole-rock geochemical analyses. Zircon U–Pb dating of two porphyritic granodiorites and a porphyritic monzogranite yielded ages of 442.7 ± 3.5, 441.8 ± 4.3, and 435.4 ± 3.5 Ma, respectively. These granitoids exhibit a geochemical affinity to I-type granite, are metaluminous with a low aluminium saturation index (A/CNK = 0.75–1.15), have moderate Al₂O₃ and low MgO contents, high La/Yb and low Sr/Y ratios, and are depleted in Nb, Ta, P, and Ti, which suggests a subduction zone magmatic arc affinity, with mixing between a primary mantle-derived magma with lesser continental crustal material. The syenogranite and monzogranite from the South Qilian Belt, which yield U–Pb zircon ages of 440.4 ± 9.0 and 442.3 ± 1.2 Ma, respectively, have pronounced S-type geochemical affinities, are peraluminous with A/CNK values of 1.07–1.16, have relatively high SiO₂, Al₂O₃, K₂O, and Rb contents, low Y and Yb, low Sr/Y and La/Yb ratios, positive Th, U, and light Rare Earth Element (REE) anomalies, and depletions in Nb, Ta, Sr, and Ti. Their geochemical signature suggests derivation from partial melting of continental crust in a syn-collisional setting. The Hf isotopic data of zircons from the granitoids show a significant input of Paleoproterozoic crust in the crustal formation of the western South Qilian Belt in Palaeozoic. Compare the ε_Hf(t) value of S-type granite with that of I-type granite, the former may have a comparatively homogeneous source. Together with regional evidence, it is proposed that a collisional event occurred between the South Qilian Belt and the Central Qilian Belt at ca. 442–435 Ma.