Deformation history of the Hampden Synform in the Eastern Fold Belt of the Mt Isa terrane

The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L¹ ₀ intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.     

Evolution of Eastern Ghats granulite belt of India in a compressional tectonic regime and juxtaposition against Iron Ore Craton of Singhbhum by oblique collision — transpression

Three major episodes of folding are evident in the Eastern Ghats terrain. The first and second generation folds are the reclined type; coaxial refolding has produced hook-shaped folds, except in massif-type charnockites in which non-coaxial refolding has produced arrow head folds. The third generation folds are upright with a stretching lineation parallel to subhorizontal fold axes. The sequence of fold stylesreclinedF ₁and coaxialF ₂, clearly points to an early compressional regime and attendant progressive simple shear. Significant subhorizontal extension duringF ₃folding is indicated by stretching lineation parallel to subhorizontal fold axes. In the massif-type charnockites low plunges ofF ₂folds indicate a flattening type of deformation partitioning in the weakly foliated rocks (magmatic ?). The juxtaposition of EGMB against the Iron Ore Craton of Singhbhum by oblique collision is indicative of a transpressional regime.     

Response of unconfined turbidity current to deep‐water fold and thrust belt topography: Orthogonal incidence on solitary and segmented folds

Sea‐floor topography of deep‐water folds is widely considered to have a major impact on turbidity currents and their depositional systems, but understanding the flow response to such features was limited mainly to conceptual notions inspired by small‐scale laboratory experiments. High‐resolution three‐dimensional numerical experiments can compensate for the lack of natural‐scale flow observations. The present study combines numerical modelling of thrusts with fault‐propagation folds by Trishear3D software with computational fluid dynamics simulations of a natural‐scale unconfined turbidity current by MassFlow‐3D? software. The study reveals the hydraulic and depositional responses of a turbidity current (ca 50 m thick) to typical topographic features that it might encounter in an orthogonal incidence on a sea‐floor deep‐water fold and thrust belt. The supercritical current (ca 10 m sec^?1) decelerated and thickened due to the hydraulic jump on the fold backlimb counter‐slope, where a reverse overflow formed through current self‐reflection and a reverse underflow was issued by backward squeezing of a dense near‐bed sediment load. The reverse flows were re‐feeding sediment to the parental current, reducing its waning rate and extending its runout. The low‐efficiency current, carrying sand and silt, outran a downslope distance of >17 km with only modest deposition (<0·2 m) beyond the fold. Most of the flow volume diverted sideways along the backlimb to surround the fold and spread further downslope, with some overspill across the fold and another hydraulic jump at the forelimb toe. In the case of a segmented fold, a large part of the flow went downslope through the segment boundary. Preferential deposition (0·2 to 1·8 m) occurred on the fold backlimb and directly upslope, and on the forelimb slope in the case of a smaller fold. The spatial patterns of sand entrapment revealed by the study may serve as guidelines for assessing the influence of substrate folds on turbiditic sedimentation in a basin.     

Planar, non-planar and refolded sheath folds in the Phulad Shear Zone, Rajasthan, India

Progressive ductile shearing in the Phulad Shear Zone of Rajasthan, India has produced a complex history of folding, with development of planar, non-planar and refolded sheath folds. There are three generations of reclined folds, F₁, F₂ and F₃, with a striping lineation (L₁) parallel to the hinge lines of F₁. The planar sheath folds of F₁ have long subparallel hinge lines at the flanks joining up in hairpin curves at relatively small apices. L₁ swerves harmoniously with the curving of F₁ hinge line. There is a strong down-dip mineral lineation parallel to the striping lineation in most places, but intersecting it at apices of first generation sheath folds. Both the striping and the mineral lineation are deformed in U-patterns over the hinges of reclined F₂ and F₃. Folding of axial surfaces and hinge lines of earlier reclined folds by later folds was accompanied by very large stretching and led to the development of non-planar sheaths. The reclined folds of all the three generations were deformed by a group of subhorizontal folds. Each generation of fold initially grew with the hinge line at a very low angle with the Y-axis of bulk non-coaxial strain and was subsequently rotated towards the down-dip direction of maximum stretching. The patterns of deformed lineations indicate that the stretching along the X-direction was extremely large, much in excess of 6000 percent.     

Correlation of the middle devonian formations of Australia

In the Precambrian rocks west and southwest of the Mount Isa Fault three significant fold generations are recognized. Within individual successions, units containing an early phase of deformation are juxtaposed by a late fault against a sequence that does not share these earlier events.

Many of the large‐scale structures in the Judenan Beds are first‐generation folds, whereas west of the Judenan Beds the area is dominated by second‐generation folds. These two sets of folds are tentatively correlated and are referred to as the Judenan Folds. An earlier set of pre‐Judenan folding is only found in the units west of the Judenan Beds. One phase of the Sybella Granite is also associated with the Judenan folding. Later small‐scale folds associated with a crenulation cleavage are, however, of little regional importance and are commonly found only in zones of highly deformed rocks.     

Fractal Simulation and Classification of Folds

Abstract: The method of fractal simulation and classification of folds is firstly studied here to describe various types of complex fold patterns in quantitative analysis. Based on the characteristics of natural folds with a fractal pattern, the fold patterns are simulated to describe various types of folds quantitatively by means of fractal interpolation. The major factors affecting the fold pattern are elucidated in fractal simulation of folds, i.e. positions of interpolation points (x, y) and the disturbance coefficient d of folds (-1<d<1). The bigger the value d for a fold simulation is, the more complex or disturbed the folds are and the better developed the relative secondary folds are. If d>0, folds are upconvex. IF d<0, they are down-convex. |d|=0, |d|=0.25 and |d|=0.5 represent three conspicuous turning states. If |d|=0, the points will be joined by a straight line. If |d|=0.25, the points will be joined smoothly. If |d|<0.25, there will be complex secondary folds between the points. If |d| >0.5, there will be more complex secondary folds between the points. The complex degrees of the fold pattern, therefore, can be classified by the disturbance coefficient d and by the discongruent degree Δ d. In nature, most folds are self-affine fractal folds.     

Superposed folding in the Rockley district,Lachlan Fold Belt,New South Wales

Low grade metasediments and metavolcanics of the Hill End Synclinorial Zone within the Rockley district, NSW have experienced two phases of macroscopic folding (D1 and D2), both of which are post‐latest Silurian in age. No hiatus is evident between D1 and D2. D1 produced large Fi folds (λ/2 usually > 2 km) lacking mesoscopic elements and having variable axial trends. D2 was associated with the development of regional slaty cleavage (S2) and mesoscopic folds which are parasitic on plunging macroscopic F2 folds (λ/2=0.4–2 km). D2 strain is variable, being most intense in the north of the district where slaty cleavage and tight mesoscopic F2 folds are well developed, and weakest in the south where mesoscopic folds are absent or usually gentle and cleavage is often feebly developed even in mica‐rich rocks, which are stratigraphic equivalents to slates and schists in the north. The F1 fold mechanism may involve multiple folding, simultaneous folding in more than one direction, or complex buckling of layers of variable thickness. D1 and D2 are tentatively correlated with folding events elsewhere in the Hill End Synclinorial Zone.     

Structure of the Abercrombie beds south of Reids flat,new South Wales

The Late Ordovician Abercrombie Beds, south of Reids Flat, New South Wales, and adjacent to the Wyangala Batholith, show evidence of three successive fold episodes. First generation folds are tight to isoclinal, with fold axes ranging from vertical to horizontal and north‐trending, and steep axial‐plane slaty cleavage. Second generation folds are steeply plunging, tight to open with north‐striking axial planes. In pelitic rocks the axial plane structure is a crenulation cleavage which overprints the slaty cleavage. The first two fold episodes were accompanied by greenschist‐facies metamorphism. Granite emplacement occurred prior to the second fold episode. A third deformation was of relatively mild intensity and produced open, north‐trending folds with axial planes dipping moderately to the east, and crenulation cleavage as the axial plane structure in pelitic rocks. These latest folds are correlated with the latest folds in the Abercrombie Beds north of the Abercrombie River. The mapped area has no apparent macroscopic structure and may be considered as a single domain.     

The thermotectonic evolution of a Proterozoic,low pressure,granulite dome,West Uusimaa,SW Finland

Three fold generations have been recognized in Svecofennian rocks (±1,800 Ma) from West Uusimaa, SW Finland. The first one (F1) might be related to thrusting and imbrication tectonics at plate collision contacts. The main generation (F2) is due to a N-S horizontal crustal shortening, which created at first E-W trending upright folds in the whole region and later tightened these F2 folds in the western part of the belt, whereas conjugate shear zones and tectonic lenses of competent rock bodies developed in the eastern part. Simultaneously the metamorphic conditions rose from amphibolite- to granulite-facies in this eastern part, which is known as the West Uusimaa Complex. The amphibolite- to granulite-facies transition zone along the western boundary of the granulite-facies complex is studied in detail. A number of prograde mineral reactions are telescoped in this transition zone: the breakdown of biotite and amphibole to ortho- ±clino-pyroxene in metaigneous rocks, the appearance of garnet in cordierite-bearing metapelites and the appearance of scapolite in calcareous rocks. Distinct mineralogical changes also occur in this zone which cross cuts all major structures and rock units and are only affected by late-F3 folding (open, disharmonic folds with approximately N-S trending axial planes) and young shear zones, associated with pseudotachylite generation. The absence of any evidence of block faulting and tilting of the crust that could be associated with the granulite complex suggests that the whole region represents one crustal level. A fluid-inclusion study indicates similar pressures for the amphibolite facies and the granulite facies domains. Application of various independent geothermobarometric methods suggest a low pressure (3–5 K bar) and a temperature increase from 550–650° C to 700–825° C, associated with a decreasing water activity (0.12O<0.4) and a general increasing CO₂ activity. Fluid inclusions strongly suggest an isobaric amphibolite/granulite transition. There-fore the granulite-facies complex is designated a thermal dome. Whole rock chemical data show that granulite-facies metamorphism is isochemical. Constraints for the Svecokarelian crustal evolution are discussed.     

构造置换及其控矿规律——以吉林板石沟铁矿为例

 强烈的塑性变形使华北地台东北部太古宙鞍山群中的吉林板石沟铁矿发生强烈的构造置换;造成原始仅有二三层的铁矿褶皱重复,在X(包络线)、Y(枢纽线)方向均被拉断,形成透镜状的复式褶皱勾状体。现有的19个矿组均为这种复式褶皱的转折端,并多呈"Z"型不对称形式。根据以上控矿规律本文提出两个找矿方向,一是包络线方向,另一是枢纽线方向,对1、3矿组具体地做了勘探设计。目前本文的勘探设计已得到勘探验证,新增铁矿储量数千万吨。     

Alpine tectono‐metamorphic history of the continental units from Vardar zone: the Kopaonik Metamorphic Complex (Dinaric‐Hellenic belt,Serbia)

The easternmost zone of the Dinaric‐Hellenic belt is represented by the Vardar Zone, in which the Kopaonik Metamorphic Complex (KMC) is regarded as the lowermost unit. This complex is topped by the unmetamorphosed Brzece unit and is intruded by the Oligocene Kopaonik Intrusive complex. The KMC is characterized by a stratigraphy that includes metapelites and meta‐carbonates of Late Triassic age, associated with metabasites. It is characterized by a complex deformation history that comprises four phases: D1 to D4. The D1 phase structures occur only as relict structures, whereas the D2 phase structures are represented by isoclinal F2 folds, associated with a well‐developed S2 foliation. The estimated P‐T conditions for the D1 and D2 metamorphism are consistent with the upper greenschist facies. The D3 phase is characterized by west‐verging thrusts associated with upright folds. In contrast, the D4 phase is characterized by open folds (F4) associated with low‐angle normal faults. The D1 and D2 deformation phases developed during the shortening related to continental collision, whereas the subsequent D3 and D4 phases can be related to the progressive exhumation of the KMC. The D4 phase probably developed during extensional tectonics during and after emplacement of the Kopaonik Intrusive Complex. The data show that the continental units belonging to the Vardar zone had a long‐lived deformation history that was more complex that previously thought. Copyright © 2009 John Wiley & Sons, Ltd.     

Transpressive Structures in the Ghadir Shear Belt,Eastern Desert,Egypt: Evidence for Partitioning of Oblique Convergence in the Arabian‐Nubian Shield during Gondwana Agglutination

Transpressional deformation has played an important role in the late Neoproterozoic evolution of the ArabianNubian Shield including the Central Eastern Desert of Egypt. The Ghadir Shear Belt is a 35 km-long, NW-oriented brittleductile shear zone that underwent overall sinistral transpression during the Late Neoproterozoic. Within this shear belt, strain is highly partitioned into shortening, oblique, extensional and strike-slip structures at multiple scales. Moreover, strain partitioning is heterogeneous along-strike giving rise to three distinct structural domains. In the East Ghadir and Ambaut shear belts, the strain is pure-shear dominated whereas the narrow sectors parallel to the shear walls in the West Ghadir Shear Zone are simple-shear dominated. These domains are comparable to splay-dominated and thrust-dominated strike-slip shear zones. The kinematic transition along the Ghadir shear belt is consistent with separate strike-slip and thrustsense shear zones. The earlier fabric(S1), is locally recognized in low strain areas and SW-ward thrusts. S2 is associated with a shallowly plunging stretching lineation(L2), and defines ～NW-SE major upright macroscopic folds in the East Ghadir shear belt. F2 folds are superimposed by ～NNW–SSE tight-minor and major F3 folds that are kinematically compatible with sinistral transpressional deformation along the West Ghadir Shear Zone and may represent strain partitioning during deformation. F2 and F3 folds are superimposed by ENE–WSW gentle F4 folds in the Ambaut shear belt. The sub-parallelism of F3 and F4 fold axes with the shear zones may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation in fold zones. Dextral ENEstriking shear zones were subsequently active at ca. 595 Ma, coeval with sinistral shearing along NW-to NNW-striking shear zones. The occurrence of upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the Ghadir shear belt. Oblique convergence may have been provoked by the buckling of the Hafafit gneiss-cored domes and relative rotations between its segments. Upright folds, fold with vertical axes and sinistral strike-slip shear zones developed in response to strain partitioning. The West Ghadir Shear Zone contains thrusts and strikeslip shear zones that resulted from lateral escape tectonics associated with lateral imbrication and transpression in response to oblique squeezing of the Arabian-Nubian Shield during agglutination of East and West Gondwana.     

Discovery of a layer of probable impact melt spherules in the Late Archaean Jeerinah Formation,Fortescue Group,Western Australia

In the high‐grade (granulite facies) metamorphic rocks at Broken Hill the foliation is deformed by two groups of folds. Group 1 folds have an axial‐plane schistosity and a sillimanite lineation parallel to their fold axes; the foliation has been transposed into the plane of the schistosity by these folds. Group 2 folds deform the schistosity and distort the sillimanite lineation so that it now lies in a plane. Both groups of folds are developed as large folds. The retrograde schist zones are zones in which new fold structures have formed. These structures deform Group 1 and Group 2 folds and are associated with the formation of a new schistosity and strain‐slip cleavage. The interface between ore and gneiss is folded about Group 1 axial planes but about axes different from those in the foliation in the gneiss. On the basis of this, the orebody could not have been parallel to the foliation prior to the first recognizable structural and metamorphic events at Broken Hill. The orebody has been deformed by Group 2 and later structures.     

The structural evolution of sheath folds: A case study from Cap de Creus

It has long been recognised that within zones of intense non-coaxial deformation, fold hinges may rotate progressively towards the transport direction ultimately resulting in highly curvilinear sheath folds. However, there is a surprising lack of detailed and systematic field analysis of such “evolving” sheath folds. This case study therefore focuses on the sequential development of cm-scale curvilinear folds in the greenschist-facies El Llimac shear zone, Cap de Creus, Spain. This simple shear-dominated dextral shear zone displays superb three dimensional exposures of sheath folds defined by mylonitic quartz bands within phyllonite. Increasing amounts of fold hinge curvature (δ) are marked by hinge segments rotating into sub-parallelism with the mineral lineation (Lm), whilst the acute angle between the axial-planar hinge girdle and foliation (ω) also displays a sequential reduction. Although Lm bisects the noses of sheath folds, it is also clearly folded and wrapped-around the sheath hinges. Lm typically preserves a larger angle (θ) with the fold hinge on the lower limb (L) compared to the upper (U) limb (θL > θU), suggesting that Lm failed to achieve a steady orientation on the lower limb. Adjacent sheath fold hinges forming fold pairs may display the same sense of hinge arcing to define synthetic curvature, or alternatively opposing directions of antithetic curvature. Such patterns reflect original buckle fold geometries coupled with the direction of shearing. The ratio of long/short fold limbs decreases with increasing hinge curvilinearity, indicating sheath folds developed via stretching of the short limb, rather than migrating or rolling hinge models. This study unequivocally demonstrates that both hinges of fold pairs become curvilinear with sheaths closing in the transport direction recording greater hinge-line curvilinearity compared to adjacent return hinges. This may provide a useful guide to bulk shear sense.     

Structural control on gold mineralization at Walhalla,Victoria

Gold mineralization associated with quartz reefs is related to the structural history of the Early Devonian, Walhalla Group. These reefs are situated in the Walhalla Synclinorium, developed during the Middle to Late Devonian Tabberabberan Orogeny. A pervasive north‐south‐trending axial planar cleavage and two styles of folding were produced during regional east‐west compression. The first are upright, open to close folds with sub‐horizontal fold axes. The second are plunging inclined, close to tight folds with fold axes that plunge steeply to the north and south. An extensional event is associated with the emplacement of the Woods Point Dyke swarm and a set of normal faults that offset all earlier structures. High‐angle reverse faults, which post‐date the folding and the emplacement of the dykes, were utilized as conduits for hydrothermal fluids and preferentially localize mineralization to laminated quartz veins. En echelon vein arrays formed during initial stages of reverse faulting became deformed during prolonged shearing to produce ptygmatic veins. Laminated quartz veins within high‐angle reverse faults contain arsenopyrite and pyrite in vein margins and gold in fractures that cross‐cut continuous quartz crystals. Gold, galena, chalcopyrite and sphalerite may also be deposited adjacent to and within fractured arsenopyrite and pyrite. Late‐stage, cross faults developed in a regime of north‐south compression and post‐date the laminated quartz veins and mineralization.     

Patterns of deformed early lineations over later folds formed by buckling and flattening

The patterns of deformed early lineations (L₁) over later folds (F₂) can be classified into several morphological types depending on the nature of variation of L₁ F₂ over the folds. The field relations indicate that the folds under consideration are neither shear folds nor parallel folds modified by flattening. The lineation patterns are therefore interpreted in terms of an empirical model of simultaneous buckling and flattening in which it is assumed that (i) the central surface of the folded layer remains a sine curve in transverse profile, (ii) the ratio of rates of buckle shortening to homogeneous strain is proportional to sin 2a, with a as the dip angle and (iii) the progressive deformation is coaxial with the Z-axis of bulk strain parallel to the planar segments of the early folds. The model gives an insight into the relative importance of different physical factors which control the development of dissimilar lineation patterns. Not all lineation patterns are explicable by this simplified model. Thus complex patterns with variable L₁ F₂ along the fold axis may develop by a progressive rotation of the geometrically defined fold hinge through successive material lines. The theoretical results have been applied to interpret the lineation patterns in Central Rajasthan, India. It is concluded that L₁ was initially very close to the E-ESE trending subhorizontal Z-axis of bulk deformation during F₂-folding and that the X-axis was subhorizontal or gently plunging with a N-NNE trend.     

Sheath fold development in monoclinic shear zones

We use numerical simulations to investigate the evolution of sheath folds around slip surfaces in simple‐shear‐dominated monoclinic shear zones. A variety of sheath fold shapes develops under general shear, including tubular folds with low aspect ratio eye patterns and tongue‐like structures showing bivergent flanking structures in sections normal to the sheath elongation, which may potentially lead to confusing shear sense interpretations. Not all investigated monoclinic flow end‐members lead to the development of sheath folds sensu stricto (folds with apical angle <90°). The aspect ratio of the eye patterns, R_yz, correlates with the ratio between the principal strain in the Y‐direction and the smaller of the principal strains in the X–Z plane, and thus it could be used in strain analysis.     

Evolution of a crustal-scale transpressive shear zone in the Albany–Fraser Orogen, SW Australia: 2. Tectonic history of the Coramup Gneiss and a kinematic framework for Mesoproterozoic collision of the West Australian and Mawson cratons

Within the Albany–Fraser Orogen of southwestern Australia, the Coramup Gneiss is a NE–SW trending zone of high‐strain rocks that preserves a detailed record of orogenesis related to Mesoproterozoic convergence of the West Australian and Mawson cratons. New structural, metamorphic and U–Pb SHRIMP zircon age data establish that the Coramup Gneiss underwent high‐grade tectonism during both Stage I (c. 1290 Ma) and Stage II (c. 1170 Ma) of the Albany–Fraser Orogeny. Stage I commenced with c. 1300 Ma high‐T, low‐P M1a metamorphism during extension, and the formation of small‐scale ptygmatic folds within a subhorizontal S1a gneissosity. High‐P M1b metamorphism at c. 1290 Ma was accompanied by the transposition and shearing of S1a into a composite, shallow SE‐dipping S1b foliation, and the development of tight recumbent F1b folds with S1‐parallel axial surfaces and asymmetries indicating NW‐directed thrusting. The preservation of a similar P–T–time record in the Fraser Complex (NE of the Coramup Gneiss) is consistent with large‐scale, NW‐directed Stage I thrusting of the Mawson Craton margin over the south‐eastern edge of the West Australian Craton. Stage II tectonism in the western Coramup Gneiss involved high‐T, low‐P M2a metamorphism and the formation of subvertical SE‐dipping D2 shear zones, shallow SW‐plunging L2 mineral stretching lineations, and NW‐verging F2 folds with S2‐parallel axial surfaces. A synkinematic pegmatite dyke emplaced into a D2 shear zone yielded a U–Pb SHRIMP zircon age of 1168 ± 12 Ma. Kinematic indicators suggest a combination of pure shear flattening perpendicular to S2, and dextral simple shear. However, contemporaneous structures elsewhere in the Albany–Fraser Orogen are consistent with continued NW–SE convergence at craton‐scale during Stage II, and oblique compression in the Coramup Gneiss is attributed to the arcuate geometry of the orogen‐scale deformation front.     

Geometry and evolution of superposed folding in the Zawar lead-zinc mineralised belt,Rajasthan

The lead-zinc bearing Proterozoic rocks of Zawar, Rajasthan, show classic development of small-scale structures resulting from superposed folding and ductile shearing. The most penetrative deformation structure noted in the rocks is a schistosity (S ₁) axial planar to a phase of isoclinal folding (F ₁). The lineations which parallel the hinges ofF ₁ folds are deformed by a set of folds (F ₂) having vertical or very steep axial planes. At many places a crenulation cleavage (S ₂) has developed subparallel to the axial planes ofF ₂ folds, particularly in the psammopelitic rocks. The plunge and trend ofF ₂ folds vary widely over the area. Deformation ofF ₂ folds into hook-shaped geometry and development of another set of axial planar crenulation cleavage are the main imprints of the third generation folds (F ₃) in the region. In addition to these, there are at least two other sets of cleavage planes with corresponding folds in small scales. More common among these is a set of recumbent and reclined folds (F ₄), developed on steeply dipping early-formed planes. Kink bands and associated sharp-hinged folds represent the other set (F ₅). Two major refolded folds are recognizable in the map pattern of the Zawar mineralised belt. The larger of the two, the Main Zawar Fold (MZF), shows a broad hook-shaped geometry. The other large-scale structure is the Zawarmala fold, lying south-west of the MZF. Both the major structures show truncation of lithological units along their respective east ‘limbs’, and extreme variation in the width of formations. The MZF is primarily the result of superimposition ofF ₃ onF ₂.F ₁ folds are relatively smaller in scale and are recognizable in the quartzite unit which responded to deformation mainly by buckle shortening. Large-scale pinching-and-swelling that appears in the outcrop pattern seems to be a pre-F₂ feature. The structural evolutionary model worked out to explain the chronology of the deformational features and the large-scale out-crop pattern envisages extreme east-west shortening following formation ofF ₁ structures, resulting in the formation of tight and isoclinal antiforms (F ₂) with pinched-in synforms in between. These latter zones evolved into a number of ductile shear zones (DSZs). The east-west refolding of the large-scaleF ₂ isoclinal antiforms seems to be the consequence of a continuous deformation and resultant migration of folds along the DSZs. The main shear zone which wraps the Zawar folds followed a curved path. Because of the penetrative nature of theF ₂ movement, the early lineations which were at high angles to the later ones (as is evident in the west of Zawarmala), became subparallel to the trend ofF ₂ folding over a large part of the area. Further, the virtually coaxial nature ofF ₂ andF ₃ folds and the refolding ofF ₃ folds by a new set of N-S folds is an indication of continuous progressive deformation.