Metallogeny and tectonic development of the Tasman Fold Belt System in New South Wales

The northwestern corner of New South Wales consists of the paratectonic Late Proterozoic to Early Cambrian Adelaide Fold Belt and older rocks, which represent basement inliers in this fold belt. The rest of the state is built by the composite Late Proterozoic to Triassic Tasman Fold Belt System or Tasmanides.In New South Wales the Tasman Fold Belt System includes three fold belts: (1) the Late Proterozoic to Early Palaeozoic Kanmantoo Fold Belt; (2) the Early to Middle Palaeozoic Lachlan Fold Belt; and (3) the Early Palaeozoic to Triassic New England Fold Belt. The Late Palaeozoic to Triassic Sydney—Bowen Basin represents the foredeep of the New England Fold Belt.The Tasmanides developed in an active plate margin setting through the interaction of East Gondwanaland with the Ur-(Precambrian) and Palaeo-Pacific plates. The Tasmanides are characterized by a polyphase terrane accretion history: during the Late Proterozoic to Triassic the Tasmanides experienced three major episodes of terrane dispersal (Late Proterozoic—Cambrian, Silurian—Devonian, and Late Carboniferous—Permian) and six terrane accretionary events (Cambrian—Ordovician, Late Ordovician—Early Silurian, Middle Devonian, Carboniferous, Middle-Late Permian, and Triassic). The individual fold belts resulted from one or more accretionary events.The Kanmantoo Fold Belt has a very restricted range of mineralization and is characterized by stratabound copper deposits, whereas the Lachlan and New England Fold Belts have a great variety of metallogenic environments associated with both accretionary and dispersive tectonic episodes.The earliest deposits in the Lachlan Fold Belt are stratabound Cu and Mn deposits of Cambro-Ordovician age. In the Ordovician Cu deposits were formed in a volcanic are. In the Silurian porphyry Cu---Au deposits were formed during the late stages of development of the same volcanic are. Post-accretionary porphyry Cu---Au deposits were emplaced in the Early Devonian on the sites of the accreted volcanic arc. In the Middle to Late Silurian and Early Devonian a large number of base metal deposits originated as a result of rifting and felsic volcanism. In the Silurian and Early Devonian numerous Sn---W, Mo and base metal—Au granitoid related deposits were formed. A younger group of Mo---W and Sn deposits resulted from Early—Middle Carboniferous granitic plutonism in the eastern part of the Lachlan Fold Belt. In the Middle Devonian epithermal Au was associated with rifting and bimodal volcanism in the extreme eastern part of the Lachlan Fold Belt.In the New England Fold Belt pre-accretionary deposits comprise stratabound Cu and Mn deposits (pre-Early Devonian): stratabound Cu and Mn and ?exhalite Au deposits (Late Devonian to Early Carboniferous); and stratabound Cu, exhalite Au, and quartz—magnetite (?Late Carboniferous). S-type magmatism in the Late Carboniferous—Early Permian was responsible for vein Sn and possibly Au---As---Ag---Sb deposits. Volcanogenic base metals, when compared with the Lachlan Fold Belt, are only poorly represented, and were formed in the Early Permian. The metallogenesis of the New England Fold Belt is dominated by granitoid-related mineralization of Middle Permian to Triassic age, including Sn---W, Mo---W, and Au---Ag---As Sb deposits. Also in the Middle Permian epithermal Au---Ag mineralization was developed. During the above period of post-orogenic magmatism sizeable metahydrothermal Sb---Au(---W) and Au deposits were emplaced in major fracture and shear zones in central and eastern New England. The occurrence of antimony provides an additional distinguishing factor between the New England and Lachlan Fold Belts. In the New England Fold Belt antimony deposits are abundant whereas they are rare in the Lachlan Fold Belt. This may suggest fundamental crustal differences.     

Mid‐Devonian movements in the Northeastern Lachlan Fold Belt

Calculations of the angular discordance between the Upper Devonian Lambie/Catombal Groups and underlying Lower Devonian formations at 130 separate locations in six areas in the northeastern Lachlan Fold Belt show that the unconformity is of a low angle except for one locality, near Limekilnes (100°). Fewer than 3% of the calculated angular discordances exceed 30°, and 73%” are less than 20°. Attempts to discover a mid‐Devonian fold direction from the restored orientation of the Lower Devonian beds, after the Upper Devonian beds have been rotated to horizontal, have been unsuccessful. Scatter of the restored bedding poles, either primary, or introduced by deformation or imprecision inherent in the measurement technique, camouflages any consistent mid‐Devonian fold axis.

Although there was demonstrable uplift, tilting, and erosion in the mid‐Devonian, limb dips on any mid‐Devonian folds do not exceed 30°. From consideration of our data, and the interpretation of angular unconformities, we conclude that there is insufficient evidence in the northeastern Lachlan Fold Belt to support an orogenic scheme in which the intense meridional deformation is synchronous with the major mid‐Devonian facies change, and part of a terminal orogeny. Only when the structures above, below and across unconformities have been mapped in some detail, will it be possible to define the nature and extent of any diastrophism that accompanied the formation of the unconformities.     

The Berridale Wrench fault: A major structure in the Snowy Mountains of New South Wales

One of the most significant, but poorly understood, tectonic events in the east Lachlan Fold Belt is that which caused the shift from mafic, mantle‐derived calc‐alkaline/shoshonitic volcanism in the Late Ordovician to silicic (S‐type) plutonism and volcanism in the late Early Silurian. We suggest that this chemical/isotopic shift required major changes in crustal architecture, but not tectonic setting, and simply involved ongoing subduction‐related magmatism following burial of the pre‐existing, active intraoceanic arc by overthrusting Ordovician sediments during Late Ordovician — Early Silurian (pre‐Benambran) deformation, associated with regional northeast‐southwest shortening. A review of ‘type’ Benambran deformation from the type area (central Lachlan Fold Belt) shows that it is constrained to a north‐northwest‐trending belt at ca 430 Ma (late Early Silurian), associated with high‐grade metamorphism and S‐type granite generation. Similar features were associated with ca 430 Ma deformation in east Lachlan Fold Belt, highlighted by the Cooma Complex, and formed within a separate north‐trending belt that included the S‐type Kosciuszko, Murrumbidgee, Young and Wyangala Batholiths. As Ordovician turbidites were partially melted at ca 430 Ma, they must have been buried already to ～20 km before the ‘type’ Benambran deformation. We suggest that this burial occurred during earlier northeast‐southwest shortening associated with regional oblique folds and thrusts, loosely referred to previously as latitudinal or east‐west structures. This event also caused the earliest Silurian uplift in the central Lachlan Fold Belt (Benambran highlands), which pre‐dated the ‘type’ Benambran deformation and is constrained as latest Ordovician — earliest Silurian (ca 450–440 Ma) in age. The south‐ to southwest‐verging, earliest Silurian folds and thrusts in the Tabberabbera Zone are considered to be associated with these early oblique structures, although similar deformation in that zone probably continued into the Devonian. We term these ‘pre’‐ and ‘type’‐Benambran events as ‘early’ and ‘late’ for historical reasons, although we do not consider that they are necessarily related. Heat‐flow modelling suggests that burial of ‘average’ Ordovician turbidites during early Benambran deformation at 450–440 Ma, to form a 30 km‐thick crustal pile, cannot provide sufficient heat to induce mid‐crustal melting at ca 430 Ma by internal heat generation alone. An external, mantle heat source is required, best illustrated by the mafic ca 430 Ma, Micalong Swamp Igneous Complex in the S‐type Young Batholith. Modern heat‐flow constraints also indicate that the lower crust cannot be felsic and, along with petrological evidence, appears to preclude older continental ‘basement terranes’ as sources for the S‐type granites. Restriction of the S‐type batholiths into two discrete, oblique, linear belts in the central and east Lachlan Fold Belt supports a model of separate magmatic arc/subduction zone complexes, consistent with the existence of adjacent, structurally imbricated turbidite zones with opposite tectonic vergence, inferred by other workers to be independent accretionary prisms. Arc magmas associated with this ‘double convergent’ subduction system in the east Lachlan Fold Belt were heavily contaminated by Ordovician sediment, recently buried during the early Benambran deformation, causing the shift from mafic to silicic (S‐type) magmatism. In contrast, the central Lachlan Fold Belt magmatic arc, represented by the Wagga‐Omeo Zone, only began in the Early Silurian in response to subduction associated with the early Benambran northeast‐southwest shortening. The model requires that the S‐type and subsequent I‐type (Late Silurian — Devonian) granites of the Lachlan Fold Belt were associated with ongoing, subduction‐related tectonic activity.     

Emplacement and deformation of the Wyangala Batholith,New South Wales

The Wyangala Batholith, in the Lachlan Fold Belt of New South Wales, is pre‐tectonic with respect to the deformation that caused the foliation in the granite, and was emplaced during a major thermal event, perhaps associated with dextral shearing, during the Late Silurian to Early Devonian Bowning Orogeny. This followed the first episode of folding in the enclosing Ordovician country rocks. Intrusion was facilitated by upward displacement of fault blocks, with local stoping. Weak magmatic flow fabrics are present. After crystallization of the granite, a swarm of mafic dykes intruded both the granite and country rock, possibly being derived from the same tectonic regime responsible for emplacement of the Wyangala Batholith. A contact aureole surrounding the granite contains cordierite‐biotite and cordierite‐andalusite assemblages. Slaty cleavage produced in the first deformation was largely obliterated by recrystallization in the contact aureole.

Postdating granite emplacement and basic dyke intrusion, a second regional deformation was accompanied by regional metamorphism ranging from lower greenschist to albite‐epidote‐amphibolite facies, and produced tectonic foliations, termed S and C, in the granite, and a foliation, S₂, in the country rocks. Contact metamorphic rocks underwent retrogressive regional metamorphism at this time. S formed under east‐west shortening and vertical extension, concurrently with S₂. C surfaces probably formed concurrently with S and indicate reverse fault motion on west‐dipping ductile shear surfaces. The second deformation may be related to Devonian or Early Carboniferous movement on the Copperhannia Thrust east of the Wyangala Batholith.     

Timing of gold mineralisation in the Ballarat goldfields,central Victoria: Constraints from 40Ar/39Ar results

⁴⁰Ar/³⁹Ar data for muscovite separates and hydrothermally altered whole‐rock samples from the Ballarat West and the Ballarat East goldfields indicate that mesothermal gold mineralisation at Ballarat occurred during several episodic pulses, ranging in age from the Late Ordovician to the Early Devonian. Initial formation of auriferous structures in the Ballarat goldfields coincided with folding and thrusting associated with the development of the western Lachlan Fold Belt between 460 and 440 Ma. Subsequent fault reactivation and magmatism resulted in remobilisation and additional mineralisation between 410 and 380 Ma, and around 370 Ma. The results presented herein are in agreement with findings for other major gold deposits in central Victoria and further constrain the history of deformation, metamorphism and mineralisation in the western subprovince of the Lachlan Fold Belt.     

Pleistocene stratigraphy of the Boco Plain,western Tasmania

The Late Devonian‐Early Carboniferous Mansfield Basin is the northernmost structural sub‐basin of the Mt Howitt Province of east‐central Victoria. It is comprised predominantly of continental clastic sedimentary rocks, and is superimposed upon deformed Cambrian to Early Devonian marine sequences of the Palaeozoic Lachlan Fold Belt. This paper documents evidence for synsedimentary deformation during the early history of the Mansfield Basin, via sedimentological, structural and stratigraphic investigations. Repeating episodes of folding, erosion and sedimentation are demonstrated along the preserved western margins of Mansfield Basin, where fold structures within the lower sequences are truncated by intrabasinal syntectonic unconformities. A convergent successor basin setting (an intermontane setting adjacent to, or between major fault zones) is suggested for initial phases of basin deposition, with synsedimentary reverse faulting being responsible for source uplift and subsequent basin deformation. Palaeocurrents within conglomerate units indicate derivation from the west and are consistent with episodic thrusting along basin margin faults providing elevated source regions. Periods of tectonic quiescence are represented by finer grained meandering fluvial facies (indicative of lower regional topographic gradients) which display drainage patterns that appear not to have been influenced by bounding faults to the west. An up‐sequence increase in the textural and compositional maturity of basin sandstones and conglomerates is proposed to be a result of the incorporation of basin fill into ongoing basin deformation, with unstable metapelitic rocks being progressively winnowed from clast populations. Rather than resulting from Carboniferous (Kanimblan) reactivation of extensional structures, as is generally assumed, the deformation observed within the lower units of the Mansfield Basin is suggested here to be essentially syndepositional and at least Late Devonian in age.     

Episodic Late Palaeozoic to Cenozoic denudation of the southeastern highlands of Australia: Evidence from the Bogong High Plains,Victoria

The Bogong High Plains of eastern Victoria occur as plateau remnants in a highly dissected region of the Australian Alps. Results from apatite fission track analyses indicate that the Bogong region experienced multiple episodes of rapid low‐temperature cooling, most of which can be tentatively linked to a tectonic cause. Early episodes of cooling occurred during the Middle to Late Devonian (ca 400–370 Ma) and Late Carboniferous to Early Permian (ca 310–290 Ma), presumably during different stages of deformation associated with the development of the Lachlan Fold Belt and glacial erosion. Rapid cooling occurred during the Late Permian to Early Triassic (ca 260–240 Ma), presumably in response to the Hunter‐Bowen orogenic event along the eastern Australian continental margin. Since the Triassic, two major episodes of fault reactivation have further displaced fission track ages between sample groups on different structural blocks. The first episode occurred during the middle Cretaceous at ca 110–90 Ma, probably in response to initial extension and denudation along the eastern Australian passive margin prior to breakup. Subsequently during the Early to mid‐Tertiary at ca 65–45 Ma, large‐scale fault reactivation occurred along the Kiewa Fault, possibly in response to changes in intraplate stresses which occurred during the middle Tertiary.     

Evolution of the southeastern Lachlan Fold Belt in Victoria

The Benambra Terrane of southeastern Australia is the eastern, allochthonous portion of the Lachlan Fold Belt with a distinctive Early Silurian to Early Devonian history. Its magmatic, metamorphic, structural, tectonic and stratigraphic histories are different from the adjacent, autochthonous Whitelaw Terrane and record prolonged orogen‐parallel dextral displacement. Unlike the Whitelaw Terrane, parts of the proto‐Benambra Terrane were affected by extensive Early Silurian plutonism associated with high T/low P metamorphism. The orogen‐parallel movement (north‐south) is in addition to a stronger component of east‐west contraction. Three main orogenic pulses deformed the Victorian portion of the terrane. The earliest, the Benambran Orogeny, was the major cratonisation event in the Lachlan Fold Belt and caused amalgamation of the components that comprise the Benambra Terrane. It produced faults, tight folding and strong cleavage with both east‐west and north‐south components of compression. The Bindian (= Bowning) Orogeny, not seen in the Whitelaw Terrane, was the main period of southward tectonic transport in the Benambra Terrane. It was characterised by the development of large strike‐slip faults that controlled the distribution of second‐generation cleavage, acted as conduits for syntectonic granites and controlled the deformation of Upper Silurian sequences. Strike‐slip and thrust faults form complex linked systems that show kinematic indicators consistent with overall southward tectonic transport. A large transform fault is inferred to have accommodated approximately 600 km of dextral strike‐slip displacement between the Whitelaw and Benambra Terranes. The Benambran and Bindian Orogenies were each followed by periods of extension during which small to large basins formed and were filled by thick sequences of volcanics and sediments, partly or wholly marine. Some of the extension appears to have occurred along pre‐existing fractures. Silurian basins were inverted during the Bindian Orogeny and Early Devonian basins by the Tabberabberan Orogeny. In the Melbourne Zone, just west of the Benambra Terrane, sedimentation patterns in this interval, in particular the complete absence of material derived from the deforming Benambra Terrane, indicate that the two terranes were not juxtaposed until just before the Tabberabberan Orogeny. This orogeny marked the end of orogen‐parallel movement and brought about the amalgamation of the Whitelaw and Benambra Terranes along the Governor Fault. Upper Devonian continental sediments and volcanics form a cover sequence to the terranes and their structural zones and show that no significant rejuvenation of older structures occurred after the Middle Devonian.     

Mafic rocks spatially associated with Devonian felsic intrusions of the southern Lachlan Fold Belt: A possible mantle contribution to crustal evolution processes

Devonian basaltic to andesitic dykes and compositionally similar plutons of the southern Lachlan Fold Belt are often temporally and spatially closely associated with large granitic complexes. Mafic intrusions play a major role in the transfer of heat into the continental crust, providing a thermal ‘engine’ which leads to crustal melting, and geochemical/isotopic evidence indicates that they contribute chemical constituents to the products of this melting. Studied mafic‐intermediate dykes in the southern Lachlan Fold Belt have tholeiitic to alkaline affinities and include groups with both high and low Ti and K. Several dyke generations may be associated with a single felsic complex. Primitive mantle‐normalised trace‐element abundance patterns with negative Nb and Ti anomalies for basaltic/andesitic and gabbroic/dioritic rocks as young as Early Devonian most resemble those of modern island arcs and suggest an influence of subduction on mantle magma sources. However, some Middle and Late Devonian mafic rocks are enriched in light rare‐earth elements and other incompatible elements, lack significant Nb anomalies, and confirm the change to continental‐rift extensional settings clearly indicated by Lachlan Fold Belt geology.     

Lachlan Fold Belt in New South Wales

The Lachlan Fold Belt is a Middle Palaeozoic orogenic belt in which terminal tectogenesis occurred during the Early Carboniferous (Kanimblan Orogeny). This fold belt went through a complicated tectonic history and developed from the stratotectonic Lachlan Marginal Mobile Zone (or geosyncline of other authors). The Lachlan Fold Belt can be divided into structural zones which are characterized by varying tectonic styles. Zones of intensive deformation alternate with less deformed zones.The formation of the Lachlan Fold Belt may be viewed in terms of a series of tensional and compressional deformational events with the major compressional or tensional stress maintaining an approximate east—west orientation (relative to the grain of the fold belt) for the life of the Lachlan Marginal Mobile Zone.     

Late Palaeozoic arc flank and fore‐arc basin sequence of the New England fold belt in the stanage bay region,central Queensland

Devonian and Carboniferous (Yarrol terrane) rocks, Early Permian strata, and Permian‐(?)Triassic plutons outcrop in the Stanage Bay region of the northern New England Fold Belt. The Early‐(?)Middle Devonian Mt Holly Formation consists mainly of coarse volcaniclastic rocks of intermediate‐silicic provenance, and mafic, intermediate and silicic volcanics. Limestone is abundant in the Duke Island, along with a significant component of quartz sandstone on Hunter Island. Most Carboniferous rocks can be placed in two units, the late Tournaisian‐Namurian Campwyn Volcanics, composed of coarse volcaniclastic sedimentary rocks, silicic ash flow tuff and widespread oolitic limestone, and the conformably overlying Neerkol Formation dominated by volcaniclastic sandstone and siltstone with uncommon pebble conglomerate and scattered silicic ash fall tuff. Strata of uncertain stratigraphic affinity are mapped as ‘undifferentiated Carboniferous’. The Early Permian Youlambie Conglomerate unconformably overlies Carboniferous rocks. It consists of mudstone, sandstone and conglomerate, the last containing clasts of Carboniferous sedimentary rocks, diverse volcanics and rare granitic rocks. Intrusive bodies include the altered and variably strained Tynemouth Diorite of possible Devonian age, and a quartz monzonite mass of likely Late Permian or Triassic age.

The rocks of the Yarrol terrane accumulated in shallow (Mt Holly, Campwyn) and deeper (Neerkol) marine conditions proximal to an active magmatic arc which was probably of continental margin type. The Youlambie Conglomerate was deposited unconformably above the Yarrol terrane in a rift basin. Late Permian regional deformation, which involved east‐west horizontal shortening achieved by folding, cleavage formation and east‐over‐west thrusting, increases in intensity towards the east.     

Thick‐skinned folding in the eastern Lachlan Fold Belt,Shoalhaven River Gorge,New South Wales

In the Shoalhaven River Gorge, in the eastern Lachlan Fold Belt, the Ordovician quartz‐turbidite succession (Adaminaby Group) is affected by one major phase of deformation with northerly trending, gently plunging, upright, close to tight folds (F₁) characterised by a range in half wavelengths up to 3 km. Several anticlinoria and synclinoria are developed and folds occur in at least four orders; these characteristics are consistent with buckling occurring at several scales and are controlled by the thickness of competent units in the multilayered succession. F₁ folding is thick‐skinned in style with the whole crust probably having been affected by deformation. D₁ occurred during the Silurian to Middle Devonian interval and was associated with crustal thickening and the shallowing of depositional environments over time. Locally, F₁ is overprinted by south‐southeast‐trending, steeply to moderately inclined F₂ that reorients F₁ to recumbent attitudes. D₂ is of Early to Middle Carboniferous age. Both deformations are related to convergence in an intra‐arc to backarc region and occurred inboard of a subduction zone, remnants of which occur in the New England Fold Belt.     

The Thomson Orogen of the Tasman Orogenic Zone

The Thomson Orogen forms the northwestern segment of the Tasman Orogenic Zone. It was a tectonically active area with several episodes of deposition, deformation and plutonism from Cambrian to Carboniferous time.Only the northeastern part of the orogen is exposed; the remainder is covered by gently folded Permian and Mesozoic sediments of the Galilee, Cooper and Great Artesian Basins. Information on the concealed Thomson Orogen is available from geophysical surveys and petroleum exploration wells which have penetrated the Permian and Mesozoic cover.The boundaries of the Thomson Orogen with other tectonic units are concealed, but discordant trends suggest that they are abrupt. To the west, the orogen is bordered by Proterozoic structural blocks which form basement west of the northeast-trending Diamantina River Lineament. The most appropriate boundary with the Lachlan and Kanmantoo Orogens to the south is an arcuate line marking a distinct change in the direction of gravity trends. The north-northwest orientation of the northern part of the New England Orogen to the east cuts strongly across the dominant northeast trend of the Thomson Orogen.The Thomson Orogen developed as a tectonic entity in latest Proterozoic or Early Cambrian time when the former northern extension of the Adelaide Orogen * was truncated along the Muloorinna Ridge. Early Palaeozoic deposition was dominated by finegrained, quartz-rich clastic sediments. Cambrian carbonates accumulated in the southwest and a Cambro-Ordovician island arc was active in the north. Along the western margin of the orogen, sediments were probably laid down on downfaulted blocks of deformed Proterozoic rocks, with oceanic crust further to the east.A mid- to Late Ordovician orogeny which affected the whole of the Thomson Orogen marked the climax of its precratonic (orogenic) stage. The northeast structural trend of the orogen (parallel to its western boundary with the Precambrian craton) was imposed at this time and has controlled the orientation of later folding and faulting. Up to three generations of folding have been recognized and fine-grained metasediments exhibit a prominent slaty cleavage. Metamorphism was to the greenschist and amphibolite facies, the highest grade rocks being associated with synorogenic granodiorite batholiths in the north. Following deposition of Late Ordovician marine sediments at the eastern margin, emplacement of post-tectonic Late Silurian or Early Devonian batholiths ended the precratonic history of the Thomson Orogen.The subsequent transitional tectonic regime was characterized by deposition of Devonian to Early Carboniferous shallow marine and continental sediments including widespread red-beds and andesitic volcanics. The maximum marine transgression occurred in the early Middle Devonian. Localized folding affected the easternmost part of the Thomson Orogen at the end of Middle Devonian time and was followed by intrusion of Devono-Carboniferous granitic plutons. However, the terminal orogeny which deformed all Devonian to Early Carboniferous rocks of the orogen was of mid-Carboniferous age. It produced northeast-trending open folds and normal and high-angle reverse faults which are considered to reflect basement structures. The cratonization of the Thomson Orogen was completed with the emplacement of Late Carboniferous granites and the eruption of comagmatic volcanics in the northeast, permian and Mesozoic sediments accumulated in broad, relatively shallow down warps which covered most of the former orogen.     

Metallogeny and tectonic development of the Tasman Fold Belt System in Queensland

The northern part of the Tasman Fold Belt System in Queensland comprises three segments, the Thomson, Hodgkinson- Broken River, and New England Fold Belts. The evolution of each fold belt can be traced through pre-cratonic (orogenic), transitional, and cratonic stages. The different timing of these stages within each fold belt indicates differing tectonic histories, although connecting links can be recognised between them from Late Devonian time onward. In general, orogenesis became younger from west to east towards the present continental margin. The most recent folding, confined to the New England Fold Belt, was of Early to mid-Cretaceous age. It is considered that this eastward migration of orogenic activity may reflect progressive continental accretion, although the total amount of accretion since the inception of the Tasman Fold Belt System in Cambrian time is uncertain.The Thomson Fold Belt is largely concealed beneath late Palaeozoic and Mesozoic intracratonic basin sediments. In addition, the age of the more highly deformed and metamorphosed rocks exposed in the northeast is unknown, being either Precambrian or early Palaeozoic. Therefore, the tectonic evolution of this fold belt must remain very speculative. In its early stages (Precambrian or early Palaeozoic), the Thomson Fold Belt was probably a rifted continental margin adjacent to the Early to Middle Proterozoic craton to the west and north. The presence of calc-alkaline volcanics of Late Cambrian Early Ordovician and Early-Middle Devonian age suggests that the fold belt evolved to a convergent Pacific-type continental margin. The tectonic setting of the pre-cratonic (orogenic) stage of the Hodgkinson—Broken River Fold Belt is also uncertain. Most of this fold belt consists of strongly deformed, flysch-type sediments of Silurian-Devonian age. Forearc, back-arc and rifted margin settings have all been proposed for these deposits. The transitional stage of the Hodgkinson—Broken River Fold Belt was characterised by eruption of extensive silicic continental volcanics, mainly ignimbrites, and intrusion of comagmatic granitoids in Late Carboniferous Early Permian time. An Andean-type continental margin model, with calc-alkaline volcanics erupted above a west-dipping subduction zone, has been suggested for this period. The tectonic history of the New England Fold Belt is believed to be relatively well understood. It was the site of extensive and repeated eruption of calc-alkaline volcanics from Late Silurian to Early Cretaceous time. The oldest rocks may have formed in a volcanic island arc. From the Late Devonian, the fold belt was a convergent continental margin above a west-dipping subduction zone. For Late Devonian- Early Carboniferous time, parallel belts representing continental margin volcanic arc, forearc basin, and subduction complex can be recognised.A great variety of mineral deposits, ranging in age from Late Cambrian-Early Ordovician and possibly even Precambrian to Early Cretaceous, is present in the exposed rocks of the Tasman Fold Belt System in Queensland. Volcanogenic massive sulphides and slate belt-type gold-bearing quartz veins are the most important deposits formed in the pre-cratonic (orogenic) stage of all three fold belts. The voicanogenic massive sulphides include classic Kuroko-type orebodies associated with silicic volcanics, such as those at Thalanga (Late Cambrian-Early Ordovician. Thomson Fold Belt) and at Mount Chalmers (Early Permian New England Fold Belt), and Kieslager or Besshi-type deposits related to submarine mafic volcanics, such as Peak Downs (Precambrian or early Palaeozoic, Thomson Fold Belt) and Dianne. OK and Mount Molloy (Silurian—Devonian, Hodgkinson Broken River Fold Belt). The major gold—copper orebody at Mount Morgan (Middle Devonian, New England Fold Belt), is considered to be of volcanic or subvolcanic origin, but is not a typical volcanogenic massive sulphide.The most numerous ore deposits are associated with calc-alkaline volcanics and granitoid intrusives of the transitional tectonic stage of the three fold belts, particularly the Late Carboniferous Early Perman of the Hodgkinson—Broken River Fold Belt and the Late Permian—Middle Triassic of the southeast Queensland part of the New England Fold Belt. In general, these deposits are small but rich. They include tin, tungsten, molybdenum and bismuth in granites and adjacent metasediments, base metals in contact meta somatic skarns, gold in volcanic breccia pipes, gold-bearing quartz veins within granitoid intrusives and in volcanic contact rocks, and low-grade disseminated porphyry-type copper and molybdenum deposits. The porphyry-type deposits occur in distinct belts related to intrusives of different ages: Devonian (Thomson Fold Belt), Late Carboniferous—Early Permian (Hodgkinson—Broken River Fold Belt). Late Permian Middle Triassic (southeast Queensland part of the New England Fold Belt), and Early Cretaceous (northern New England Fold Belt). All are too low grade to be of economic importance at present.Tertiary deep weathering events were responsible for the formation of lateritic nickel deposits on ultramafics and surficial manganese concentrations from disseminated mineralisation in cherts and jaspers.     

Paleozoic terranes of eastern Australia and the drift history of Gondwana

Critical assessment of Paleozoic paleomagnetic results from Australia shows that paleopoles from locations on the main craton and in the various terranes of the Tasman Fold Belt of eastern Australia follow the same path since 400 Ma for the Lachlan and Thomson superterranes, but not until 250 Ma or younger for the New England superterrane. Most of the paleopoles from the Tasman Fold Belt are derived from the Lolworth-Ravenswood terrane of the Thomson superterrane and the Molong-Monaro terrane of the Lachlan superterrane. Consideration of the paleomagnetic data and geological constraints suggests that these terranes were amalgamated with cratonic Australia by the late Early Devonian. The Lolworth-Ravenswood terrane is interpreted to have undergone a 90° clockwise rotation between 425 and 380 Ma. Although the Tamworth terrane of the western New England superterrane is thought to have amalgamated with the Lachlan superterrane by the Late Carboniferous, geological syntheses suggest that movements between these regions may have persisted until the Middle Triassic. This view is supported by the available paleomagnetic data. With these constraints, an apparent polar wander path for Gondwana during the Paleozoic has been constructed after review of the Gondwana paleomagnetic data. The drift history of Gondwana with respect to Laurentia and Baltica during the Paleozoic is shown in a series of paleogeographic maps.     

U–Pb zircon geochronology of Late Devonian to Early Carboniferous extension‐related silicic volcanism in the northern New England Fold Belt

Laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) analysis of zircons confirm a Late Devonian to Early Carboniferous age (ca 360–350 Ma) for silicic volcanic rocks of the Campwyn Volcanics and Yarrol terrane of the northern New England Fold Belt (Queensland). These rocks are coeval with silicic volcanism recorded elsewhere in the fold belt at this time (Connors Arch, Drummond Basin). The new U–Pb zircon ages, in combination with those from previous studies, show that silicic magmatism was both widespread across the northern New England Fold Belt (>250 000 km² and ≥500 km inboard of plate margin) and protracted, occurring over a period of ～15 million years. Zircon inheritance is commonplace in the Late Devonian — Early Carboniferous volcanics, reflecting anatectic melting and considerable reworking of continental crust. Inherited zircon components range from ca 370 to ca 2050 Ma, with Middle Devonian (385–370 Ma) zircons being common to almost all dated units. Precambrian zircon components record either Precambrian crystalline crust or sedimentary accumulations that were present above or within the zone of magma formation. This contrasts with a lack of significant zircon inheritance in younger Permo‐Carboniferous igneous rocks intruded through, and emplaced on top of, the Devonian‐Carboniferous successions. The inheritance data and location of these volcanic rocks at the eastern margins of the northern New England Fold Belt, coupled with Sr–Nd, Pb isotopic data and depleted mantle model ages for Late Palaeozoic and Mesozoic magmatism, imply that Precambrian mafic and felsic crustal materials (potentially as old as 2050 Ma), or at the very least Lower Palaeozoic rocks derived from the reworking of Precambrian rocks, comprise basement to the eastern parts of the fold belt. This crustal basement architecture may be a relict from the Late Proterozoic breakup of the Rodinian supercontinent.     

Crustal structure of the Ordovician Macquarie Arc,Eastern Lachlan Orogen,based on seismic‐reflection profiling

In the Eastern Lachlan Orogen, the mineralised Molong and Junee‐Narromine Volcanic Belts are two structural belts that once formed part of the Ordovician Macquarie Arc, but are now separated by younger Silurian‐Devonian strata as well as by Ordovician quartz‐rich turbidites. Interpretation of deep seismic reflection and refraction data across and along these belts provides answers to some of the key questions in understanding the evolution of the Eastern Lachlan Orogen—the relationship between coeval Ordovician volcanics and quartz‐rich turbidites, and the relationship between separate belts of Ordovician volcanics and the intervening strata. In particular, the data provide evidence for major thrust juxtaposition of the arc rocks and Ordovician quartz‐rich turbidites, with Wagga Belt rocks thrust eastward over the arc rocks of the Junee‐Narromine Volcanic Belt, and the Adaminaby Group thrust north over arc rocks in the southern part of the Molong Volcanic Belt. The seismic data also provide evidence for regional contraction, especially for crustal‐scale deformation in the western part of the Junee‐Narromine Volcanic Belt. The data further suggest that this belt and the Ordovician quartz‐rich turbidites to the east (Kirribilli Formation) were together thrust over ?Cambrian‐Ordovician rocks of the Jindalee Group and associated rocks along west‐dipping inferred faults that belong to a set that characterises the middle crust of the Eastern Lachlan Orogen. The Macquarie Arc was subsequently rifted apart in the Silurian‐Devonian, with Ordovician volcanics preserved under the younger troughs and shelves (e.g. Hill End Trough). The Molong Volcanic Belt, in particular, was reworked by major down‐to‐the‐east normal faults that were thrust‐reactivated with younger‐on‐older geometries in the late Early ‐ Middle Devonian and again in the Carboniferous.     

Plate-driven extension and convergence along the East Gondwana active margin: Late Silurian–Middle Devonian tectonics of the Lachlan Fold Belt,southeastern Australia

The Lachlan Fold Belt of southeastern Australia developed along the Panthalassan margin of East Gondwana. Major silicic igneous activity and active tectonics with extensional, strike-slip and contractional deformation have been related to a continental backarc setting with a convergent margin to the east. In the Early Silurian (Benambran Orogeny), tectonic development was controlled by one or more subduction zones involved in collision and accretion of the Ordovician Macquarie Arc. Thermal instability in the Late Silurian to Middle Devonian interval was promoted by the presence of one or more shallow subducted slabs in the upper mantle and resulted in widespread silicic igneous activity. Extension dominated the Late Silurian in New South Wales and parts of eastern Victoria and led to formation of several sedimentary basins. Alternating episodes of contraction and extension, along with dispersed strike-slip faulting particularly in eastern Victoria, occurred in the Early Devonian culminating in the Middle Devonian contractional Tabberabberan Orogeny. Contractional deformation in modern systems, such as the central Andes, is driven by advance of the overriding plate, with highest strain developed at locations distant from plate edges. In the Ordovician to Early Devonian, it is inferred that East Gondwana was advancing towards Panthalassa. Extensional activity in the Lachlan backarc, although minor in comparison with backarc basins in the western Pacific Ocean, was driven by limited but continuous rollback of the subduction hinge. Alternation of contraction and extension reflects the delicate balance between plate motions with rollback being overtaken by advance of the upper plate intermittently in the Early to Middle Devonian resulting in contractional deformation in an otherwise dominantly extensional regime. A modern system that shows comparable behaviour is East Asia where rollback is considered responsible for widespread sedimentary basin development and basin inversion reflects advance of blocks driven by compression related to the Indian collision.     

Tectonic structures in the Peel Sandstones and Carboniferous limestone,Isle of Man

On the Isle of Man, the Early Devonian Peel Sandstones and Early Carboniferous limestones have been deformed in places by folds, cleavage and other structures. The structures in the Peel Sandstones have been attributed to pre‐lithification deformation associated with slumping of the red beds. Here, they are re‐interpreted to be products of post‐lithification deformation, inferred from small‐scale structures and fabrics, which took place in a localized thrust zone. Compression was approximately NW–SE and translation towards the SE. That deformation may have also produced some of the late structures in the Lower Palaeozoic rocks of the island. The minimum age of these post‐Early Devonian structures is unknown but is probably pre‐Carboniferous: they may represent the mid‐Devonian Acadian deformation. The Carboniferous succession is folded in places and contains stylolites and stylolitic cleavage. A stress regime with E–W to WNW–ESE compression is inferred. These structures have orientations and morphologies shown to resemble those in neighbouring parts of southern Britain, where they are attributed mainly to mid‐ to late‐Carboniferous Variscan events. Alternatively, some or all of them might be products of late Mesozoic and Tertiary tectonics recognized elsewhere in the region. Copyright © 2010 John Wiley & Sons, Ltd.     

东澳大利亚南悉尼盆地二叠纪的地层、沉积环境与盆地演化

晚石炭世末期-三叠纪东澳大利亚的鲍恩-冈尼达-悉尼（Bowen- Gunnedah-Sydney）盆地系是位于拉克伦（Lachlan）褶皱带和新英格兰（New England）褶皱带之间的一个长条形的构造盆地。从北部的冈尼达（Gunnedah）到南部的巴特曼斯（Batemans）湾，悉尼盆地是鲍恩-冈尼达-悉尼盆地系南端的一个次级盆地。悉尼盆地的二叠系包括河流、三角洲、滨浅海沉积岩和火山岩地层。南悉尼盆地的西南部二叠系不整合覆盖于变形变质的拉克伦（Lachlan）褶皱带之上。二叠系由下部的塔拉特郎（Tallaterang）群、中部的肖尔黑文群（Shoalhaven Group）和上部的伊勒瓦拉煤系（Illawarra Coal Measures）组成。从晚石炭世末到中三叠世悉尼盆地经历了弧后扩张到典型的前陆盆地的不同阶段：弧后扩张阶段、被动热沉降阶段和挤压挠曲负载阶段。