Correlation of the middle devonian formations of Australia

In the Precambrian rocks west and southwest of the Mount Isa Fault three significant fold generations are recognized. Within individual successions, units containing an early phase of deformation are juxtaposed by a late fault against a sequence that does not share these earlier events.

Many of the large‐scale structures in the Judenan Beds are first‐generation folds, whereas west of the Judenan Beds the area is dominated by second‐generation folds. These two sets of folds are tentatively correlated and are referred to as the Judenan Folds. An earlier set of pre‐Judenan folding is only found in the units west of the Judenan Beds. One phase of the Sybella Granite is also associated with the Judenan folding. Later small‐scale folds associated with a crenulation cleavage are, however, of little regional importance and are commonly found only in zones of highly deformed rocks.     

Deformation history of the Hampden Synform in the Eastern Fold Belt of the Mt Isa terrane

The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L¹ ₀ intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.     

Structure and metamorphism of the Calliope Volcanic Assemblage: Implications for middle to Late Devonian orogeny in the northern New England Fold Belt

The Late Silurian to Middle Devonian Calliope Volcanic Assemblage in the Rockhampton region is deformed into a set of northwest‐trending gently plunging folds with steep axial plane cleavage. Folds become tighter and cleavage intensifies towards the bounding Yarrol Fault to the east. These folds and associated cleavage also deformed Carboniferous and Permian rocks, and the age of this deformation is Middle to Late Permian (Hunter‐Bowen Orogeny). In the Stanage Bay area, both the Calliope Volcanic Assemblage and younger strata generally have one cleavage, although here it strikes north to northeast. This cleavage is also considered to be of Hunter‐Bowen age. Metamorphic grade in the Calliope Volcanic Assemblage ranges from prehnite‐pumpellyite to greenschist facies, with higher grades in the more strongly cleaved rocks. In the Rockhampton region the Calliope Volcanic Assemblage is part of a west‐vergent fold and thrust belt, the Yarrol Fault representing a major thrust within this system.

A Late Devonian unconformity followed minor folding of the Calliope Volcanic Assemblage, but no cleavage was formed. The unconformity does not represent a collision between an exotic island arc and continental Australia as previously suggested.     

Structural controls on orogenic gold mineralisation in the Klondike goldfield,Canada

The Klondike Schist that forms the basement rocks for the famous Klondike placer goldfield was emplaced as km-scale thrust slices in Early Jurassic time, along with some thin (10 to 30 m-scale) slices of greenstone and ultramafic rocks. Permian metamorphic fabrics in the schists were deformed during thrust emplacement by structures formed as the rocks passed through the brittle–ductile transition. Early-formed thrust-related structures were almost-pervasive recumbent folds that affected both the schist and greenstone/ultramafic slices and imposed a spaced cleavage with minor recrystallisation of micas. These structures gave way to shallow-dipping phacoidal cleavage near (within <100 m of) thrust structures. Thrust-related structures have been overprinted locally by well-defined steeply dipping reverse fault-fold zones, and associated upright folding on regional (km) to mesoscopic (m) scales. The fold-fault zones occur as two orthogonal sets of structures oriented NW to N and NE to E. Some of these steeply dipping fault zones have been reactivated by Late Cretaceous normal faulting. Orogenic (mesothermal) gold-bearing veins were emplaced in local sites of extension during or after formation of the compressional fault-fold zones and before normal fault reactivation. Over 400 veins (m to cm-scale) observed in this study imply a general NW strike for mineralised structures (W to N), but with a broad scatter of orientations. Vein emplacement was controlled principally by fold axial surfaces of kink folds of the fault-fold generation. However, some other local extension sites have opened along preexisting structures to host veins locally, including metamorphic foliation and spaced cleavage planes. In addition, irregular extensional fractures with no obvious structural control host some veins. The Klondike mineralised veins formed as swarms with broad regional structural control, but represent relatively diffuse mineralised zones, with numerous scattered small veins, compared to most orogenic vein systems. These diffuse vein swarms appear to be sufficient sources for the rich and geographically localised placer gold deposits that formed in overlying gravels during erosion of the Klondike Schist basement.     

Internal geometry of a thrust sheet,eastern Proterozoic belt,Godavari Valley,South India

A small thrust sheet, named Pedda Gutta thrust sheet, consisting of calcareous to cherty argillites and cherts, and juxtaposed against tidal-intertidal cross-bedded quartzites and stromatolitic and sileceous limestone in the eastern Proterozoic belt, Godavari Valley, exhibits structures comparable in style to those of the external zone of a fold-thrust mountain belt. A wide spectrum of periodic and aperiodic mesoscopic folds varying from upright ones with rounded hinges and attenuated limbs, through noncylindrical kinks to whalebacks and sheath-like forms have developed within the small volume of the thrust sheet, the preserved thickness of which is of the order of 50 metres (comparable in scale to cleavage duplexes). Cleavage development is also heterogeneous across the width of the sheet. Displacement transfer from faults to folds and vice-versa is a common feature. On the basis of the distribution of the mesoscopic structures of varying style within the sheet and localization of fault rocks, three slices (wedges) have been recognized, each bounded on the east by a thrust which is steep at the current erosion level but interpreted to be of listric form making the thrust network comparable in architecture, though not in scale, to a hinterland (west) dipping imbricate fan.     

江西大背坞金矿区及其外围前寒武系控矿构造解析

大背坞金矿区及其外围前寒武系经历了三期构造变形：第一期形成近东西向障公山扇形复背斜及轴面流劈理;第二期形成北东向中常褶皱及轴面折劈理;第三期形成北东向挤压破碎带。第三期构造变形发生于700Ma左右。三期构造变形使围岩中分散的金富集形成三期含金石英脉。成矿受早元古代障公山群第五岩组矿源层、障公山复背斜西倾伏端、折劈理带、挤压破碎带复合控制。     

雪峰山西侧贵州地区中生代构造特征及其演化

贵州中生代变形主要发生在燕山期,发育三幕褶皱变形、两幕逆冲和三幕走滑。根据区域对比、卷入褶皱的地层和褶皱间的叠加关系,判断三期褶皱的形成顺序依次为近东西向、北东向和南北向,时限在J3—K2之间。逆冲推覆构造主要由向北西或西逆冲的近南北向逆冲断层组成,大体与南北向褶皱同时形成; 自雪峰构造带西缘向西,依次划分出根部带、中部带和前锋带。但是,在根部带识别出两幕逆冲推覆,其它两带各识别出一幕。走滑断层也有3个方向：东西向、北东向和近南北向。东西向走滑断层呈现出右行压扭的运动学特征,而大多数北东向走滑断层是左行张扭性质的。依据各个方向断层间的切割和限制关系,推测东西向走滑断层最早形成,其次是南北向逆冲断层,北东向走滑断层最晚活动。这些断裂和褶皱特征,总体表现出贵州多重多种复合联合的构造特征,最后,探讨了本区的构造成因模式。     

An example of structural and metamorphic relationships in the Musgrave orogenic belt,central Australia

The western Musgrave Ranges are broadly divided into three groups of metamorphic rocks. A central granulite‐facies core is bounded on the north by rocks of amphibolite grade and on the south by rocks transitional between the granulite and amphibolite facies. Faults trending east‐west separate the three groups of rocks.

The detailed structural relationships between the granulites and the lower grade rocks are described and discussed. The granulites are structurally relatively simple and are characterised by the presence of a strong southwesterly‐plunging, mineral‐streaking lineation. In marked contrast, the transitional rocks are more complexly folded on a macroscopic scale and they also have a well‐developed mineral lineation plunging to the southeast. These two lineation orientations are considered to be directions of maximum elongation. The amphibolite‐facies rocks are also complexly folded and at least two lineations related to different phases of deformation have been recognized.

A suite of foliated and lineated dolerite dykes which occurs throughout the area inherited their fabric during a period of intense deformation and recrystallization, which resulted in the development of numerous mylonite zones.

It is suggested that the granulite‐facies rocks may represent a suite of cover rocks which have been thrust in a northerly direction over a pre‐existing amphibolite‐facies basement.     

Tectonic relationships between the Proterozoic Gawler and Willyama orogenic domains,Australia

Stratotectonic and morphotectonic data from the two principal exposed domains (pre‐Adelaidean rocks) of the Gawler sub‐province are used to characterize the Proterozoic Olarian orogeny and to distinguish its effects from those of the later Phanerozoic Delamerian orogeny.

The principal metasedimentary sequences in the Gawler domain and in the Willama domain are inferred to have been deposited in a single broad zone of early Proterozoic shallow‐water sedimentation on older (presumed Archaean) continental crust. The sequence becomes more pelitic upwards and may be interpreted as a transgressive sequence with more distal facies to the east.

Three main phases of deformation are recognized, and each phase has similar characteristics and age in both domains. D ₁ 2nd D₂ can be dated between 1850 and 1650 Ma, while D₃ appears to be about 1650–1540 Ma.

In high grade rocks, D₁ gave rise to a layer‐parallel schistosity, while D ₂ is characterized by tight folds with a high‐grade axial‐plane schistosity. The whole sub‐province was characterized by high geothermal gradients so that medium‐ to high‐grade metamorphism affected the lower parts of the succession before and during the D₁ and D₂ deformation episodes. No distinct tectonic zones can be recognized but large‐scale stratigraphic inversions (i.e. nappe tectonics) during D ₁ have been recognized only in the east of the Willyama domain. The higher parts of the stratigraphic succession are generally less deformed and exhibit only low‐grade metamorphism.

D ₃ produced relatively open, upright macroscopic folds and was characteristically associated with retrogression, but was demonstrably of pre‐Adelaidean age. The Gawler domain exhibits D ₃ structures although it lies in the platform west of the Adelaide Geosyncline and was not affected by deformation during Adelaidean sedimentation or by the subsequent Delamerian orogeny. A network of retrograde shear zones is the principal expression of post‐Olarian deformation in the Willyama domain which forms part of the basement to the Adelaide Geosyncline.

The trends of D ₂ and D ₃ folding in the two domains are similar and it is shown therefore that no large‐scale rotations of one domain relative to the other has been produced by the Delamerian orogeny. Large‐scale translations on discrete faults or on broad zones of simple shear in the basement are not easily ruled out, but if they exist, are probably largely of pre‐Adelaidean age. However, a significant relationship between Olarian structures and variable Adelaidean fold trends has been deduced.

The Olarian orogeny may have occurred in close proximity to a continental margin to the east and may thus be related to subduction processes. It differs from linear gneissic belts in Phanerozoic orogenies since it occurs in a more stable stratotectonic environment and over a wider area.     

Tectonics of the Longmen Shan and Adjacent Regions,Central China

The Longmen Shan region includes, from west to east, the northeastern part of the Tibetan Plateau, the Sichuan Basin, and the eastern part of the eastern Sichuan fold-and-thrust belt. In the northeast, it merges with the Micang Shan, a part of the Qinling Mountains. The Longmen Shan region can be divided into two major tectonic elements: (1) an autochthon/parautochthon, which underlies the easternmost part of the Tibetan Plateau, the Sichuan Basin, and the eastern Sichuan fold-and-thrust belt; and (2) a complex allochthon, which underlies the eastern part of the Tibetan Plateau. The allochthon was emplaced toward the southeast during Late Triassic time, and it and the western part of the autochthon/parautochthon were modified by Cenozoic deformation.

The autochthon/parautochthon was formed from the western part of the Yangtze platform and consists of a Proterozoic basement covered by a thin, incomplete succession of Late Proterozoic to Middle Triassic shallow-marine and nonmarine sedimentary rocks interrupted by Permian extension and basic magmatism in the southwest. The platform is bounded by continental margins that formed in Silurian time to the west and in Late Proterozoic time to the north. Within the southwestern part of the platform is the narrow N-trending Kungdian high, a paleogeographic unit that was positive during part of Paleozoic time and whose crest is characterized by nonmarine Upper Triassic rocks unconformably overlying Proterozoic basement.

In the western part of the Longmen Shan region, the allochthon is composed mainly of a very thick succession of strongly folded Middle and Upper Triassic Songpan Ganzi flysch. Along the eastern side and at the base of the allochthon, pre-Upper Triassic rocks crop out, forming the only exposures of the western margin of the Yangtze platform. Here, Upper Proterozoic to Ordovician, mainly shallow-marine rocks unconformably overlie Yangtze-type Proterozic basement rocks, but in Silurian time a thick section of fine-grained clastic and carbonate rocks were deposited, marking the initial subsidence of the western Yangtze platform and formation of a continental margin. Similar deep-water rocks were deposited throughout Devonian to Middle Triassic time, when Songpan Ganzi flysch deposition began. Permian conglomerate and basic volcanic rocks in the southeastern part of the allochthon indicate a second period of extension along the continental margin. Evidence suggests that the deep-water region along and west of the Yangtze continental margin was underlain mostly by thin continental crust, but its westernmost part may have contained areas underlain by oceanic crust. In the northern part of the Longmen Shan allochthon, thick Devonian to Upper Triassic shallow-water deposits of the Xue Shan platform are flanked by deep-marine rocks and the platform is interpreted to be a fragment of the Qinling continental margin transported westward during early Mesozoic transpressive tectonism.

In the Longmen Shan region, the allochthon, carrying the western part of the Yangtze continental margin and Songpan Ganzi flysch, was emplaced to the southeast above rocks of the Yangtze platform autochthon. The eastern margin of the allochthon in the northern Longmen Shan is unconformably overlapped by both Lower and Middle Jurassic strata that are continuous with rocks of the autochthon. Folded rocks of the allochthon are unconformably overlapped by Lower and Middle Jurassic rocks in rare outcrops in the northern part of the region. They also are extensively intruded by a poorly dated, generally undeformed belt, of plutons whose ages (mostly K/Ar ages) range from Late Triassic to early Cenozoic, but most of the reliable ages are early Mesozoic. All evidence indicates that the major deformation within the allochthon is Late Triassic/Early Jurassic in age (Indosinian). The eastern front of the allochthon trends southwest across the present mountain front, so it lies along the mountain front in the northeast, but is located well to the west of the present mountain front on the south.

The Late Triassic deformation is characterized by upright to overturned folded and refolded Triassic flysch, with generally NW-trending axial traces in the western part of the region. Folds and thrust faults curve to the north when traced to the east, so that along the eastern front of the allochthon structures trend northeast, involve pre-Triassic rocks, and parallel the eastern boundary of the allochthon. The curvature of structural trends is interpreted as forming part of a left-lateral transpressive boundary developed during emplacement of the allochthon. Regionally, the Longmen Shan lies along a NE-trending transpressive margin of the Yangtze platform within a broad zone of generally N-S shortening. North of the Longmen Shan region, northward subduction led to collision of the South and North China continental fragments along the Qinling Mountains, but northwest of the Longmen Shan region, subduction led to shortening within the Songpan Ganzi flysch basin, forming a detached fold-and-thrust belt. South of the Longmen Shan region, the flysch basin is bounded by the Shaluli Shan/Chola Shan arc—an originally Sfacing arc that reversed polarity in Late Triassic time, leading to shortening along the southern margin of the Songpan Ganzi flysch belt. Shortening within the flysch belt was oblique to the Yangtze continental margin such that the allochthon in the Longmen Shan region was emplaced within a left-lateral transpressive environment. Possible clockwise rotation of the Yangtze platform (part of the South China continental fragment) also may have contributed to left-lateral transpression with SE-directed shortening. During left-lateral transpression, the Xue Shan platform was displaced southwestward from the Qinling orogen and incorporated into the Longmen Shan allochthon. Westward movement of the platform caused complex refolding in the northern part of the Longmen Shan region.

Emplacement of the allochthon flexurally loaded the western part of the Yangtze platform autochthon, forming a Late Triassic foredeep. Foredeep deposition, often involving thick conglomerate units derived from the west, continued from Middle Jurassic into Cretaceous time, although evidence for deformation of this age in the allochthon is generally lacking.

Folding in the eastern Sichuan fold-and-thrust belt along the eastern side of the Sichuan Basin can be dated as Late Jurassic or Early Cretaceous in age, but only in areas 100 km east of the westernmost folds. Folding and thrusting was related to convergent activity far to the east along the eastern margin of South China. The westernmost folds trend southwest and merge to the south with folds and locally form refolded folds that involve Upper Cretaceous and lower Cenozoic rocks. The boundary between Cenozoic and late Mesozoic folding on the eastern and southern margins of the Sichuan Basin remains poorly determined.

The present mountainous eastern margin of the Tibetan Plateau in the Longmen Shan region is a consequence of Cenozoic deformation. It rises within 100 km from 500–600 m in the Sichuan Basin to peaks in the west reaching 5500 m and 7500 m in the north and south, respectively. West of these high peaks is the eastern part of the Tibetan Plateau, an area of low relief at an elevations of about 4000 m.

Cenozoic deformation can be demonstrated in the autochthon of the southern Longmen Shan, where the stratigraphic sequence is without an angular unconformity from Paleozoic to Eocene or Oligocene time. During Cenozoic deformation, the western part of the Yangtze platform (part of the autochthon for Late Triassic deformation) was deformed into a N- to NE-trending foldandthrust belt. In its eastern part the fold-thrust belt is detached near the base of the platform succession and affects rocks within and along the western and southern margin of the Sichuan Basin, but to the west and south the detachment is within Proterozoic basement rocks. The westernmost structures of the fold-thrust belt form a belt of exposed basement massifs. During the middle and later part of the Cenozoic deformation, strike-slip faulting became important; the fold-thrust belt became partly right-lateral transpressive in the central and northeastern Longmen Shan. The southern part of the fold-thrust belt has a more complex evolution. Early Nto NE-trending folds and thrust faults are deformed by NW-trending basementinvolved folds and thrust faults that intersect with the NE-trending right-lateral strike-slip faults. Youngest structures in this southern area are dominated by left-lateral transpression related to movement on the Xianshuihe fault system.

The extent of Cenozoic deformation within the area underlain by the early Mesozoic allochthon remains unknown, because of the absence of rocks of the appropriate age to date Cenozoic deformation. Klippen of the allochthon were emplaced above the Cenozoic fold-andthrust belt in the central part of the eastern Longmen Shan, indicating that the allochthon was at least partly reactivated during Cenozoic time. Only in the Min Shan in the northern part of the allochthon is Cenozoic deformation demonstrated along two active zones of E-W shortening and associated left-slip. These structures trend obliquely across early Mesozoic structures and are probably related to shortening transferred from a major zone of active left-slip faulting that trends through the western Qinling Mountains. Active deformation is along the left-slip transpressive NW-trending Xianshuihe fault zone in the south, right-slip transpression along several major NE-trending faults in the central and northeastern Longmen Shan, and E-W shortening with minor left-slip movement along the Min Jiang and Huya fault zones in the north.

Our estimates of Cenozoic shortening along the eastern margin of the Tibetan Plateau appear to be inadequate to account for the thick crust and high elevation of the plateau. We suggest here that the thick crust and high elevation is caused by lateral flow of the middle and lower crust eastward from the central part of the plateau and only minor crustal shortening in the upper crust. Upper crustal structure is largely controlled in the Longmen Shan region by older crustal anisotropics; thus shortening and eastward movement of upper crustal material is characterized by irregular deformation localized along older structural boundaries.     

雪峰山西侧贵州地区中生代构造特征及其演化

贵州中生代变形主要发生在燕山期,发育三幕褶皱变形、两幕逆冲和三幕走滑。根据区域对比、卷入褶皱的地层和褶皱间的叠加关系,判断三期褶皱的形成顺序依次为近东西向、北东向和南北向,时限在J_3—K_2之间。逆冲推覆构造主要由向北西或西逆冲的近南北向逆冲断层组成,大体与南北向褶皱同时形成;自雪峰构造带西缘向西,依次划分出根部带、中部带和前锋带。但是,在根部带识别出两幕逆冲推覆,其它两带各识别出一幕。走滑断层也有3个方向:东西向、北东向和近南北向。东西向走滑断层呈现出右行压扭的运动学特征,而大多数北东向走滑断层是左行张扭性质的。依据各个方向断层间的切割和限制关系,推测东西向走滑断层最早形成,其次是南北向逆冲断层,北东向走滑断层最晚活动。这些断裂和褶皱特征,总体表现出贵州多重多种复合联合的构造特征,最后,探讨了本区的构造成因模式。     

Cenozoic tectonics and landform evolution of the coast and adjacent highlands of southeast New South Wales

The Upper Precambrian and Lower Palaeozoic Rocks in the Mt Lofty Ranges, South Australia, have been subjected to at least three phases of folding. The first involved the formation of inclined folds and less common reclined folds. These structures are overprinted by usually upright, moderately tight, second and third generation folds which may show a well developed axial plane crenulation cleavage.

The metamorphism commenced prior to the appearance of penetrative structures and continued in many areas until after the third phase of deformation. It appears to have had its greatest effect during the static period following the first phase of folding.

Mineral assemblages of the pelitic rocks indicate that the metamorphism is of the low pressure‐intermediate type and that there are at least four progressive zones of metamorphism, namely, chlorite, biotite, andalusite‐staurolite, and sillimanite. Cordierite occurs in the sillimanite zone and kyanite is sporadically distributed in the andalusite‐staurolite zone. In the Angaston‐Springton region separate andalusite and staurolite zone boundaries may be delineated which cross as they are traced towards Angaston. This relationship is considered to be due to higher pressures operating during metamorphism in the latter area.

The maximum pressure and temperature reached in the metamorphism of these rocks are discussed in the light of recent experimental data.     

Deformation Pattern in the Kurnool and Nallarnalai Groups in the Northeastern Part (Palnad Area) of the Cuddapah Basin, South India and its Implication on Rodinia/Gondwana Tectonics

The Proterozoic basins of India adjoining the Eastern Ghats Granulite Belt (EGGB) in eastern and southern India contain both Mesproterozoic and Neoproterozoic successions. The intracratonic set-up and contractional deformation fo the Neoproterozoc successions in the Paland sub-basin in the northeastern part of Cuddapah basin and similar crustal shortening in contemporaneous successions lying west of the EGGB and Nellore Schist Belt (NSB) are considered in relation to the proposed geodynamic evolution of the the Rodinia and Gondwana supercontinents. Tectonic shortening in the Palnad sub-basin (northeast Cuddapah), partitioned into top-to-westnorthwest thrust shear, flexural folds and cleavage development under overall E-W contraction, suggests foreland style continental shortening within an intracratonic set-up. A thrust sheet containing the Nallamalai rocks and overlying the Kurnool rocks in the northeastern part of Palnad sub-basin exhibits early tight to isoclinal folds and slaty (phylllitic) cleavage, which can be correlated with early Mesoproterozoic deformation structures in the nothern Nallamalai Fold Belt (NFB). NNE-SSW trending folds and cleavage affect the Kurnool Group and overprint earlier structures in the thrust sheet. Thrusting of the Nallamalai rocks and the later structures may have been related to convergence of the Eastern Ghats terrane and the East-Dharwar-Bastar craton during Early Neoproterozoic (Greenvillian) and/or later rejuvenation related to Pan-African amalgamation of East and West Gondwana.     

Neoproterozoic nappes and superposed folding of the Itremo Group, west-central Madagascar

The Precambrian geology of west-central Madagascar is reviewed and re-interpreted in light of new field observations, Landsat Thematic Mapper image analysis, and U–Pb geochronology. The bedrock of the area consists of: (1) late Archean (to Paleoproterozoic) migmatite gneiss and schist; (2) Mesoproterozoic stratified rocks (Itremo, Amborompotsy, and Malakialina Groups) perhaps deposited unconformably on the older metamorphic rocks (1, above); (3) Proterozoic ( 1000 Ma–720 Ma) plutonic rocks emplaced into both units above (1 and 2), and; (4) latest Neoproterozoic to middle Cambrian ( 570–520 Ma) granitoids emplaced as regionally discordant and weakly foliated plutons throughout the regions.

The effects of Neoproterozoic orogenic processes are widespread throughout the region and our observations and isotopic measurements provide important constraints on the tectonic history of the region: (i) Archean gneisses and Mesoproterozoic stratified rocks are the crystalline basement and platformal sedimentary cover, respectively, of a continental fragment of undetermined tectonic affinity (East or West Gondwanan, or neither). (ii) This continental fragment (both basement and cover) was extensively invaded by subduction-related plutons in the period from  1000 Ma to  720 Ma that were emplaced prior to the onset of regional metamorphism and deformation. (iii) Continental collision related to Gondwana's amalgamation began after  720 Ma and before  570 Ma. Collision related deformation and metamorphism continued throughout the rest of the Neoproterozoic with thermal effects that lasted until  520 Ma. The oldest structures produced during continental collision were km-scale fold- and thrust-nappes with east or southeast-directed vergence (present-day direction). They resulted in the inversion and repetition of Archean and Proterozoic rocks throughout the region. During this early phase of convergence warm rocks were thrust over cool rocks thereby producing the present distribution of regional metamorphic isograds. The vergence of the nappes and the distribution of metamorphic rocks are consistent with their formation within a zone of west or northwest-dipping continental convergence (present-day direction). (iv) Later upright folding of the nappes (and related folds and thrusts) produced km-scale interference fold patterns. The geometry and orientation of these younger upright folds is consistent with E–W horizontal shortening (present-day direction) within a sinistral transpressive regime. We relate this final phase of deformation to motion along the Ranotsara and related shear zones of south Madagascar, and to the initial phases of lower crustal exhumation and extensional tectonics within greater Gondwana.     

The establishment of recumbent folds in the Lower Palaeozoic near Queanbeyan,New South Wales

Lower Palaeozoic sedimentary and volcanic rocks east of Queanbeyan, N.S.W., have undergone multiple deformation resulting in four systems of folds. The first of these consists of large isoclinal, recumbent folds (F1). The second generation folds (F2) are the most pronounced; they consist of flattened flexural‐slip folds with well developed axial‐plane slaty cleavage. Minor variants of this system are associated with meridionally‐trending faults. Third and fourth generation folds are minor kink systems.

The existence of first generation folds was established on the basis of F2 fold‐facing determinations, and their likely form was deduced from the geometrical variations of F2 folds. It is thought that all fold phases developed during the Late Silurian Bowning Orogeny.     

Structure and tectonics along the inner edge of a foreland basin: The Hunter Coalfield in the northern Sydney Basin,New South Wales

From the early Late Permian onwards, the northeastern part of the Sydney Basin, New South Wales, (encompassing the Hunter Coalfield) developed as a foreland basin to the rising New England Orogen lying to the east and northeast. Structurally, Permian rocks in the Hunter Coalfield lie in the frontal part of a foreland fold‐thrust belt that propagated westwards from the adjacent New England Orogen. Thrust faults and folds are common in the inner part of the Sydney Basin. Small‐scale thrusts are restricted to individual stratigraphic units (with a major ‘upper decollement horizon’ occurring in the mechanically weak Mulbring Siltstone), but major thrusts are inferred to sole into a floor thrust at a poorly constrained depth of approximately 3 km. Folds appear to have formed mainly as hangingwall anticlines above these splaying thrust faults. Other folds formed as flat‐topped anticlines developed above ramps in that floor thrust, as intervening synclines ahead of such ramp anticlines, or as decollement folds. These contractional structures were overprinted by extensional faults developed during compressional deformation or afterwards during post‐thrusting relaxation and/or subsequent extension. The southern part of the Hunter Coalfield (and the Newcastle Coalfield to the east) occupies a structural recess in the western margin of the New England Orogen and its offshore continuation, the Currarong Orogen. Rocks in this recess underwent a two‐stage deformation history. West‐northwest‐trending stage one structures such as the southern part of the Hunter Thrust and the Hunter River Transverse Zone (a reactivated syndepositional transfer fault) developed in response to maximum regional compression from the east‐northeast. These were followed by stage two folds and thrusts oriented north‐south and developed from maximum compression oriented east‐west. The Hunter Thrust itself was folded by these later folds, and the Hunter River Transverse Zone underwent strike‐slip reactivation.     

Evidence for a major crustal dislocation in the Hodgkinson Province,North Queensland

Several Late Palaeozoic granites which intrude strata of the Silurian‐Devonian Hodgkinson Province, north Queensland, display pronounced west‐northwest‐east‐southeast orientations, as do a suite of brittle structures that have affected both the plutons and country rocks. These features define a 20 km‐wide, west‐northwest‐trending zone, here named the Desailly Structure, which traverses the Hodgkinson Province and extends west across the Palmerville Fault into the Proterozoic Yambo Inlier. Deformation within the Desailly Structure was heterogeneously partitioned into zones of west‐northwest‐east‐southeast faulting separated by tracts of competent country rock. The latter contain a pervasive north‐south‐trending structural grain which locally controlled pluton emplacement and resulted in a meridional orientation of many granitoid bodies. Initiation of the Desailly Structure is attributed to have occurred syn‐ to post‐D₂ of the regional deformation history. It was reactivated in the Hunter‐Bowen Orogeny (D₄), with the zone expressing an overall sinistral sense of displacement.     

Structural effects on the Proterozoic Ullensvang Group (West Norway) relatable to forceful emplacement of expanding plutons

An isolated synclinorium, comprising the up to 5 km thick Ullensvang Group of metavolcanic and metasedimentary rocks, is surrounded by granitoid plutons and has no recognizable older basement. From an earlier interpretation based on regional data this area is inferred to be part of a Proterozoic, cordilleran-type volcanic-plutonic belt. Major structures in the synclinorium are interpreted to have evolved as follows: 1) Early folds were produced by regional compression; 2) within a part of the synclinorium, such folds were tightened and reoriented during a subsequent deformation phase caused by forceful emplacement of the Kvinnherad batholith, flanking the synclinorium to the southwest; 3) this deformation was accompanied by thrust faulting towards the northeast, away from the batholith; 4) forceful emplacement of plutons belonging to the Eidfjord-Kinsarvik batholith, on the northeastern flank of the synclinorium, produced southwest-vergent overfolding of the earlier structures in the synclinorium. In addition, local deformation around a pluton intruding the northern part of the synclinorium near Utne produced areally restricted deformation structures, approximately corresponding in time with the second deformation event (2) above. Structures in plutonics rocks of the batholiths are interpreted in terms of an emplacement model involving distension diapirism. The deformation zones associated with diapiric plutons in this area appear to be more similar to some of those reported from Archaean greenstone belts than to those found in volcanic-plutonic belts of younger cordilleran-type orogens.     

Metamorphism and tectonics of a Pan-African terrain in southeastern Sinai

The Precambrian crystalline basement of Sinai represents a low-pressure metamorphic terrain intruded by large volumes of granitic rock. Based on detailed fieldwork, a general assessment of the metamorphic and tectonic history of the Wadi Kid area, southeastern Sinai, is presented. Three lithostratigraphic units can be traced over the whole area; the Umm Zariq Formation (arkoses, greywackes, pelites), the Tarr Formation (dolomitic-calcareous rocks) and, unconformably overlying the previous two units, the Heib Formation (flows, pyroclastics, conglomerates). D₁ deformation of this 3.5 km thick sequence resulted in upright folds, with changing strike of the axial planes from NE to NW across the area. Low-grade conditions prevailed during this phase. D₂ produced recumbent folds and a subhorizontal cleavage, leading to transposition of D₁ structures in the higher grade parts of the area. Metamorphism reached its peak conditions around D₂. Pressures are estimated at 2.5–3.5 kb, whereas temperatures vary from 450–660°C. In the central Wadi Kid area, garnet, staurolite, cordierite and andalusite occur in metapelitic rocks. Highest grade rocks are syn-D₂ andalusite—K-feldspar gneiss diapirs. Metamorphic zones are shallow dippin and form a domed pattern. Most of the metavolcanics and the syntectonic and late tectonic plutonic rocks belong to the calc-alkaline suite.The Kid Group sediments and volcanics were deposited in a shallow basin and subaerially, respectively, probably on older sialic basement. This basement is at present not exposed because post-orogenic uplift directly after the Pan-African event was relatively small (3–6 km). Metamorphism and the D₂ formation phase can both be related to a rising (mafic?) diapir. The Sinai Peninsula may have been a continental margin or a cratonized, mature island arc, in Late Proterozoic times.     

SIGNIFICANCE AND CHARACTERISTICS OF OPHIOLITE SUITE IN LAJI SHAN, SOUTHERN QILIAN MOUNTAINS, QINGHAI PROVINCE,CHINA

SIGNIFICANCE AND CHARACTERISTICS OF OPHIOLITE SUITE IN LAJI SHAN, SOUTHERN QILIAN MOUNTAINS, QINGHAI PROVINCE,CHINAthedoctoralprogramofhighereducation (970 49119)