共查询到20条相似文献,搜索用时 31 毫秒
1.
A discrete model to represent the unbounded soil (halfspace) in a soil–structure interaction analysis in the time domain is developed. For each dynamic degree of freedom of the foundation node, the discrete model consists of a mass M0 which is attached to a rigid support with a spring K and with a damper C0. In addition, a free node with the mass M1 is introduced, which is connected to the foundation node with a damper C1. All coefficients are frequency-independent. The discrete model is semi-empirical. It is based on a semi-infinite truncated cone, whereby, after enforcing the static stiffness, the remaining parameters are modified to achieve an optimal fit of the dynamic-stiffness coefficient in the frequency domain. The spring K is equal to the static stiffness. The coefficients appearing in the equations for the dampers C0, C1 and the masses M0, M1 are specified (assuming a homogeneous halfspace) for the disc, the embedded cylinder, the rectangle (also embedded) and the strip. A square on a layer whose stiffness increases with depth resting on a homogeneous halfspace is also treated. For an embedded foundation, eccentricities arise. Material damping increases the damper C0 and the mass M0. 相似文献
2.
A modified multiple tension upward infiltration method to estimate the soil hydraulic properties
下载免费PDF全文
![点击此处可从《水文研究》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Determination of saturated hydraulic conductivity, Ks, and the shape parameters α and n of the water retention curve, θ(h), is of paramount importance to characterize the water flow in the vadose zone. This work presents a modified upward infiltration method to estimate Ks, α and n from numerical inverse analysis of the measured cumulative upward infiltration (CUI) at multiple constant tension lower boundary conditions. Using the HYDRUS‐2D software, a theoretical analysis on a synthetic loam soil under different soil tensions (0, 0–10, 0–50 and 0–100 cm), with and without an overpressure step of 10 cm high from the top boundary condition at the end of the upward infiltration process, was performed to check the uniqueness and the accuracy of the solutions. Using a tension sorptivimeter device, the method was validated in a laboratory experiment on five different soils: a coarse and a fine sand, and a 1‐mm sieved loam, clay loam and silt‐gypseous soils. The estimated α and n parameters were compared to the corresponding values measured with the TDR‐pressure cell method. The theoretical analysis demonstrates that Ks and θ(h) can be simultaneously estimated from measured upward cumulative infiltration when high (>50 cm) soil tensions are initially applied at the lower boundary. Alternatively, satisfactory results can be also obtained when medium tensions (<50 cm) and the Ks calculated from the overpressure step at the end of the experiment are considered. A consistent relationship was found between the α (R2 = 0.86, p < 0.02) and n (R2 = 0.97, p < 0.001) values measured with the TDR‐pressure cell and the corresponding values estimated with the tension sorptivimeter. The error between the α (in logarithm scale) and n values estimated with the inverse analysis and the corresponding values measured with pressure chamber were 3.1 and 6.1%, respectively. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
3.
Synthesis of soil‐hydraulic properties and infiltration timescales in wildfire‐affected soils
下载免费PDF全文
![点击此处可从《水文研究》网站下载免费的PDF全文](/ch/ext_images/free.gif)
We collected soil‐hydraulic property data from the literature for wildfire‐affected soils, ash, and unburned soils. These data were used to calculate metrics and timescales of hydrologic response related to infiltration and surface runoff generation. Sorptivity (S) and wetting front potential (Ψf) were significantly different (lower) in burned soils compared with unburned soils, whereas field‐saturated hydraulic conductivity (Kfs) was not significantly different. The magnitude and duration of the influence of capillarity during infiltration was greatly reduced in burned soils, causing faster ponding times in response to rainfall. Ash had large values of S and Kfs but moderate values of Ψf, compared with unburned and burned soils, indicating ash has long ponding times in response to rainfall. The ratio of S2/Kfs was nearly constant (~100 mm) for unburned soils but more variable in burned soils, suggesting that unburned soils have a balance between gravity and capillarity contributions to infiltration that may depend on soil organic matter, whereas in burned soils the gravity contribution to infiltration is greater. Changes in S and Kfs in burned soils act synergistically to reduce infiltration and accelerate and amplify surface runoff generation. Synthesis of these findings identifies three key areas for future research. First, short timescales of capillary influences on infiltration indicate the need for better measurements of infiltration at times less than 1 min to accurately characterize S in burned soils. Second, using parameter values, such as Ψf, from unburned areas could produce substantial errors in hydrologic modeling when used without adjustment for wildfire effects, causing parameter compensation and resulting underestimation of Kfs. Third, more thorough measurement campaigns that capture soil‐structural changes, organic matter impacts, quantitative water repellency trends, and soil‐water content along with soil‐hydraulic properties could drive the development of better techniques for numerically simulating infiltration in burned areas. 相似文献
4.
Biocrust effects on soil infiltration have attracted increasing attention in dryland ecosystems, but their seasonal variations in infiltrability have not yet been well understood. On the Chinese Loess Plateau, soil infiltrability indicated by saturated hydraulic conductivity (Ks) of biocrusts and bare soil, both on aeolian sand and loess soil, was determined by disc infiltrometer in late spring (SPR), midsummer (SUM), and early fall (FAL). Then their correlations with soil biological and physiochemical properties and water repellency index (RI) were analysed. The results showed that the biocrusts significantly decreased Ks both on sand during SPR, SUM, and FAL (by 43%, 66%, and 35%, respectively; P < .05) and on loess (by 42%, 92%, and 10%, respectively; P <.05). As compared with the bare soil, the decreased Ks in the biocrusted surfaces was mostly attributed to the microorganism biomass and also to the increasing content of fine particles and organic matter. Most importantly, both the biocrusts and bare soil exhibited significant (F ≥ 11.89, P ≤ .003) seasonal variations in Ks, but their patterns were quite different. Specifically, the Ks of bare soil gradually decreased from SPR to SUM (32% and 42% for sand and loess, respectively) and FAL (29% and 39%); the Ks of biocrusts also decreased from SPR to SUM (59% and 92%) but then increased in FAL (36% and 588%). Whereas the seasonal variations in Ks of the biocrusts were closely correlated with the seasonal variations in RI, the RI values were not high enough to point at hydrophobicity. Instead of that, the seasonal variations of Ks were principally explained by the changes in the crust biomass and possibly by the microbial exopolysaccharides. We conclude that the biocrusts significantly decreased soil infiltrability and exhibited a different seasonal variation pattern, which should be carefully considered in future analyses of hydropedological processes. 相似文献
5.
Vincenzo Alagna Massimo Iovino Vincenzo Bagarello Jorge Mataix‐Solera Lubomir Lichner 《水文研究》2019,33(4):661-674
The repellency index (RI) defined as the adjusted ratio between soil‐ethanol, Se, and soil‐water, Sw, sorptivities estimated from minidisk infiltrometer experiments has been used instead of the widely used water drop penetration time and molarity of ethanol drop tests to assess soil water repellency. However, sorptivity calculated by the usual early‐time infiltration equation may be overestimated as the effects of gravity and lateral capillary are neglected. With the aim to establish the best applicative procedure to assess RI, different approaches to estimate Se and Sw were compared that make use of both the early‐time infiltration equation (namely, the 1 min, S1, and the short‐time linearization approaches), and the two‐term axisymmetric infiltration equation, valid for early to intermediate times (namely, the cumulative linearization and differentiated linearization approaches). The dataset included 85 minidisk infiltrometer tests conducted in three sites in Italy and Spain under different vegetation habitats (forest of Pinus pinaster and Pinus halepensis, burned pine forest, and annual grasses), soil horizons (organic and mineral), postfire treatments, and initial soil water contents. The S1 approach was inapplicable in 42% of experiments as water infiltration did not start in the first minute. The short‐time linearization approach yielded a systematic overestimation of Se and Sw that resulted in an overestimation of RI by a factor of 1.57 and 1.23 as compared with the cumulative linearization and differentiated linearization approaches. A new repellency index, RIs, was proposed as the ratio between the slopes of the linearized data for the wettable and hydrophobic stages obtained by a single water infiltration test. For the experimental conditions considered, RIs was significantly correlated with RI and WDPT. Compared with RI, RIs includes information on both soil sorptivity and hydraulic conductivity and, therefore, it can be considered more physically linked to the hydrological processes affected by soil water repellency. 相似文献
6.
C. Peña-Sancho T.A. Ghezzehei B. Latorre C. González-Cebollada D. Moret-Fernández 《水文科学杂志》2017,62(10):1683-1693
Determination of saturated hydraulic conductivity, Ks, and the van Genuchten water retention curve θ(h) parameters is crucial in evaluating unsaturated soil water flow. The aim of this work is to present a method to estimate Ks, α and n from numerical analysis of an upward infiltration process at saturation (Cap0), with (Cap0 + h) and without (Cap0) an overpressure step (h) at the end of the wetting phase, followed by an evaporation process (Evap). The HYDRUS model as well as a brute-force search method were used for theoretical loam soil parameter estimation. The uniqueness and the accuracy of solutions from the response surfaces, Ks–n, α–n and Ks–α, were evaluated for different scenarios. Numerical experiments showed that only the Cap0 + Evap and Cap0 + h + Evap scenarios were univocally able to estimate the hydraulic properties. The method gave reliable results in sand, loam and clay-loam soils. 相似文献
7.
Research shows that water repellency is a key hydraulic property that results in reduced infiltration rates in burned soils. However, more work is required in order to link the hydrological behaviour of water repellent soils to observed runoff responses at the plot and hillslope scale. This study used 5 M ethanol and water in disc infiltrometers to quantify the role of macropore flow and water repellency on spatial and temporal infiltration patterns in a burned soil at plot (<10 m2) scale in a wet eucalypt forest in south‐east Australia. In the first summer and winter after wildfire, an average of 70% and 60%, respectively, of the plot area was water repellent and did not contribute to infiltration. Macropores (r > 0·5 mm), comprising just 5·5% of the soil volume, contributed to 70% and 95%, respectively, of the field‐saturated and ponded hydraulic conductivity (Kp). Because flow occurred almost entirely via macropores in non‐repellent areas, this meant that less than 2·5% of the soil surface effectively contributed to infiltration. The hydraulic conductivity increased by a factor of up to 2·5 as the hydraulic head increased from 0 to 5 mm. Due to the synergistic effect of macropore flow and water repellency, the coefficient of variation (CV) in Kp was three times higher in the water‐repellent soil (CV = 175%) than under the simulated non‐repellent conditions (CV = 66%). The high spatial variability in Kp would act to reduce the effective infiltration rate during runoff generation at plot scale. Ponding, which tend to increase with increasing scale, activates flow through macropores and would raise the effective infiltration rates at larger scales. Field experiments designed to provide representative measurements of infiltration after fire in these systems must therefore consider both the inherent variability in hydraulic conductivity and the variability in infiltration caused by interactions between surface runoff and hydraulic conductivity. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
8.
M
TSU
: Recovering Seismic Moments from Tsunameter Records 总被引:1,自引:0,他引:1
We define a new magnitude scale, MTSU, allowing the quantification of the seismic moment M0 of an earthquake based on recordings of its tsunami in the far field by ocean-bottom pressure sensors (``tsunameters') deployed
in ocean basins, far from continental or island shores which are known to affect profoundly and in a nonlinear fashion the
amplitude of the tsunami wave. The formula for MTSU, MTSU = log10 M0 − 20 = log10 X (ω) + CDTSU + CSTSU + C0, where X (ω) is the spectral amplitude of the tsunami, CDTSU a distance correction and CSTSU a source correction, is directly adapted from the mantle magnitude Mm introduced for seismic surface waves by Okal and Talandier. Like Mm, its corrections are fully justified theoretically based on the representation of a tsunami wave as a branch of the Earth's
normal modes. Even the locking constant C0, which may depend on the nature of the recording (surface amplitude of the tsunami or overpressure at the ocean floor) and
its units, is predicted theoretically. MTSU combines the power of a theoretically developed algorithm, with the robustness of a magnitude measurement that does not take
into account such parameters as focal geometry and exact depth, which may not be available under operational conditions in
the framework of tsunami warning. We verify the performance of the concept on simulations of the great 1946 Aleutian tsunami
at two virtual gauges, and then apply the algorithm to 24 records of 7 tsunamis at DART tsunameters during the years 1994–2003.
We find that MTSU generally recovers the seismic moment M0 within 0.2 logarithmic units, even under unfavorable conditions such as excessive focal depth and refraction of the tsunami
wave around continental masses. Finally, we apply the algorithm to the JASON satellite trace obtained over the Bay of Bengal
during the 2004 Sumatra tsunami, after transforming the trace into a time series through a simple ad hoc procedure. Results are surprisingly good, with most estimates of the moment being over 1029 dyn-cm, and thus identifying the source as an exceptionally large earthquake. 相似文献
9.
Significant anomalies were observed at the geomagnetic stations in the southwest region of China before the Yingjiang MS6.1 earthquake and the Ludian MS6.5 earthquake in 2014. We processed the geomagnetic vertical component diurnal variation data by the spatial correlation method. The results show that during the period from April 1 to May 20, 2014,there existed quasi-synchronous decrease changes in the coefficient curves between the five geomagnetic stations of Guiyang,Hechi,Nanshan,Muli,Yongning and Xinyi and Hongshan stations.Furthermore,there was a high gradient zone in the normalized correlation coefficient contour map with background values removed. The epicenters of the Yingjiang MS6.1 earthquake and the Ludian MS6.5 earthquake are located in the gradient zone or near the gradient zone. 相似文献
10.
Ronald D. Andrus Paramananthan Piratheepan Brian S. Ellis Jianfeng Zhang C. Hsein Juang 《Soil Dynamics and Earthquake Engineering》2004,24(9-10):713
Three methods that follow the general format of the Seed-Idriss simplified procedure for evaluating liquefaction resistance of soils are compared in this paper. They are compared by constructing relationships between penetration resistance and small-strain shear–wave velocity (VS) implied from cyclic resistance ratio (CRR) curves for the three methods, and by plotting penetration-VS data pairs. The penetration-VS data pairs are from 43 Holocene-age sand layers in California, South Carolina, Canada, and Japan. It is shown that the VS-based CRR curve is more conservative than CRR curves based on the Standard Penetration Test (SPT) and Cone Penetration Test (CPT), for the compiled Holocene data. This result agrees with the findings of a recent probability study where the SPT-, CPT-, and VS-based CRR curves were characterized as curves with average probability of liquefaction of 31, 50, and 26%, respectively. New SPT- and CPT-based CRR equations are proposed that provide more consistent assessments of liquefaction potential for the Holocene sand layers considered. 相似文献
11.
S. Thevanayagam 《地震工程与工程振动(英文版)》2007,6(2):123-134
Mechanical behavior such as stress-strain response, shear strength, resistance to liquefaction, modulus, and shear wave velocity of granular mixes containing coarse and fine grains is dependent on intergrain contact density of the soil. The global void ratio e is a poor index of contact density for such soils. The contact density depends on void ratio, fine grain content (Cv), size disparity between particles, and gradation among other factors. A simple analysis of a two-sized particle system with large size disparity is used to develop an understanding of the effects of Cv, e, and gradation of coarse and fine grained soils in the soil mix on intergrain contact density. An equivalent intergranular void ratio (ec)oq is introduced as a useful intergrain contact density for soils at fines content of less than a threshold value Crth. Beyond this value, an equivalent interfine void ratio (ef)eq is introduced as a primary intergrain contact density index. At higher values of Cv beyond a limiting value of fine grains content CVL, an interfine void ratio ef is introduced as the primary contact density index. Relevant equivalent relative density indices (Drc)eq and (Drf)eq are also presented. Experimental data show that these new indices correlate well with steady state strength, liquefaction resistance, and shear wave velocities of sands, silty sands, sandy silts, and gravelly sand mixes. 相似文献
12.
S. Thevanayagam 《地震工程与工程振动(英文版)》2007,6(2):135-146
Whether the presence of non-plastic silt in a granular mix soil impact its liquefaction potential and how to evaluate liquefaction resistance of sand containing different amounts of silt contents are both controversial issues. This paper presents the results of an experimental evaluation to address these issues. Two parameters, namely, equivalent intergranular void ratio (ec)eq and equivalent interfine void ratio (ef)eq, proposed in a companion paper (Thevanayagam, 2007) as indices of active grain contacts in a granular mix, are used to characterize liquefaction resistance of sands and silty sands. Results indicate that, at the same global void ratio (e), liquefaction resistance of silty sand decreases with an increase in fines content (Cv) up to a threshold value (Crth). This is due to a reduction in intergrain contact density between the coarse grains. Beyond Crth, with further addition of fines, the interfine contacts become significant while the inter-coarse grain contacts diminish and coarse grains become dispersed. At the same e, the liquefaction resistance increases and the soil becomes stronger with a fttrther increase in silt content. Beyond a limiting fines content (CrL), the liquefaction resistance is controlled by interfine contacts only. When Cr〈Crth, at the same (e)eq, the liquefaction resistance of silty sand is comparable to that of the host clean sand at a void ratio equal to (ec)eq. When CF〉CFth, at the same (ef)eq, the cyclic strength of a sandy silt is comparable to the host silt at a void ratio equal to (ef)eq. 相似文献
13.
A deep-learning-based approach for seismic surface-wave dispersion inversion (SfNet) with application to the Chinese mainland
下载免费PDF全文
![点击此处可从《地震科学(英文版)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Surface-wave tomography is an important and widely used method for imaging the crust and upper mantle velocity structure of the Earth. In this study, we proposed a deep learning (DL) method based on convolutional neural network (CNN), named SfNet, to derive the vS model from the Rayleigh wave phase and group velocity dispersion curves. Training a network model usually requires large amount of training datasets, which is labor-intensive and expensive to acquire. Here we relied on synthetics generated automatically from various spline-based vS models instead of directly using the existing vS models of an area to build the training dataset, which enhances the generalization of the DL method. In addition, we used a random sampling strategy of the dispersion periods in the training dataset, which alleviates the problem that the real data used must be sampled strictly according to the periods of training dataset. Tests using synthetic data demonstrate that the proposed method is much faster, and the results for the vS model are more accurate and robust than those of conventional methods. We applied our method to a dataset for the Chinese mainland and obtained a new reference velocity model of the Chinese continent (ChinaVs-DL1.0), which has smaller dispersion misfits than those from the traditional method. The high accuracy and efficiency of our DL approach makes it an important method for vS model inversions from large amounts of surface-wave dispersion data. 相似文献
14.
15.
基于2011—2020年在龙门山地区发生的地震,分3个区段估算累积贝尼奥夫应变。结果表明,龙门山北段对九寨沟MS7.0地震存在阶跃,震后一年内累积贝尼奥夫应变抬升量约为2 000×10~8;龙门山中段对芦山MS7.0地震存在明显阶跃,震后一年内累积贝尼奥夫应变抬升量约为5 300×10~8。由此可以认为,龙门山中段与芦山地震有较高关联度,而其北段与九寨沟地震的关联度次之。这个抬升量是该区域构造运动与对应地震关联度的一个描述,这对于研究地震的动力源、孕震构造及发震机理有参考意义。另外,对累积贝尼奥夫应变时变斜率的研究结果还表明,累积贝尼奥夫应变的时变斜率在邻近地震前均存在降低的现象,这可能是震前应力松弛过程的表现,但这仅是一个初步研究,对其机理以及可否成为大地震孕育指标等问题还需要对更多震例作进一步研究。 相似文献
16.
17.
The deep learning method has made nurnerials achievements regarding anomaly detection in the field of time series. We introduce the speech production model in the field of artificial intelligence, changing the convolution layer of the general convolution neural network to the residual element structure by adding identity mapping, and expanding the receptive domain of the model by using the dilated causal convolution. Based on the dilated causal convolution network and the method of log probability density function, the anomalous events are detected according to the anomaly scores. The validity of the method is verified by the simulation data, which is applied to the actual observed data on the observation staion of Pingliang geoeletric field in Gansu Province. The results show that one month before the Wenchuan MS8.0, Lushan MS7.0 and Minxian-Zhangxian MS6.6 earthquakes, the daily cumulative error of log probability density of the predicted results in Pingliang Station suddenly decreases, which is consistent with the actual earthquake anomalies in a certain time range. After analyzing the combined factors including the spatial electromagnetic environment and the variation of micro fissures before the earthquake, we explain the possible causes of the anomalies in the geoelectric field of before the earthquake. The successful application of deep learning in observed data of the geoelectric field may behefit for improving the ultilization rate both the data and the efficiency of detection. Besides, it may provide technical support for more seismic research. 相似文献
18.
D. Moret‐Fernández J. Vicente B. Latorre F. Lera C. Castañeda M. V. López J. Herrero 《水文研究》2012,26(2):246-254
The water retention curve (θ(ψ)), which defines the relationship between soil volumetric water content (θ) and matric potential (ψ), is of paramount importance in characterizing the hydraulic behaviour of soils. However, few methods are so far available for estimating θ(ψ) in undisturbed soil samples. We present a new design of TDR‐pressure cell (TDR‐Cell) for estimating θ(ψ) in undisturbed soil samples. The TDR‐Cell consists of a 50‐mm‐long and 50‐mm internal diameter stainless steel cylinder (which constitutes the outer frame of a coaxial line) attached to a porous ceramic disc and closed at the ends with two aluminium lids. A 49‐mm‐long and 3‐mm‐diameter stainless steel rod, which runs longitudinally through the centre of the cylinder, constitutes the inner rod of a coaxial TDR probe. The TDR‐Cell was used to determine the θ(ψ) curves of a packed sand and seven undisturbed soil samples from three profiles of agricultural soils. These θ(ψ) curves were subsequently compared to those obtained from the corresponding 2‐mm sieved soils using the pressure plate method. Measurements of bulk electrical conductivity, σa, as a function of the water content, σa(θ), of the undisturbed soil samples were also performed. An excellent correlation (R2 = 0·988) was found between the θ values measured by TDR on the different undisturbed soils and the corresponding θ obtained from the soil gravimetric water content. A typical bimodal θ(ψ) function was found for most of the undisturbed soil samples. Comparison between the θ(ψ) curves measured with the TDR‐Cell and those obtained from the 2‐mm sieved soils showed that the pressure plate method overestimates θ at low ψ values. The σa(θ) relationship was well described by a simple power expression (R2 > 0·95), in which the power factor, defined as tortuosity, ranged between 1·18 and 3·75. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
19.
20.
Oleg Zaytsev Alexander B. Rabinovich Richard E. Thomson Norman Silverberg 《Continental Shelf Research》2010
Currents in the northern Bay of La Paz were examined using an 8-month Acoustic Doppler Current Profiler (ADCP) record collected in the upper 185 m of the water column during 2007. Flow variability was dominated by tidal motions, which accounted for 43% (33% diurnal, 10% semidiurnal) of the total kinetic energy. The tidal motions had a pronounced vertical structure dominated within a shallow (∼30 m thick) surface layer by intense counterclockwise (CCW) rotary S1 diurnal radiational currents that were highly coherent with the counterclockwise seabreeze. Motions within the semidiurnal frequency band were primarily associated with significant counterclockwise S2 radiational tidal currents, which were also coherent with the seabreeze. Both S1 and S2 tidal ellipses in the upper layer were aligned perpendicular to the bay entrance with mean semi-major axes of 55 and 20 cm/s, respectively. Below the surface layer, tidal currents decayed rapidly to relatively weak, clockwise rotary barotropic motions. In contrast to those for radiational harmonics, tidal ellipses of the gravitational constituents (M2, K1 and O1) were oriented cross-bay. Energy within the diurnal frequency band in the surface layer was dominated by a coherent component (barotropic, phase-locked baroclinic and radiational), which accounted for roughly 65% (59% from S1 alone) of the total diurnal kinetic energy. Of the remaining diurnal band energy, 18% was associated with an incoherent baroclinic component and 17% with a background noise component. Below 30 m depth, the corresponding estimates are 40%, 32% and 28%, respectively. The persistent, surface-intensified CCW rotary currents observed at the mooring site are assumed to be forced by strong CCW seabreeze winds in the presence of a “slippery” low-density surface layer. This response may be further augmented by topographic narrowing at the bay entrance and by the close proximity of the diurnal and inertial frequency bands in the region. 相似文献