Annual to decadal morphodynamics of the foredune system at Greenwich Dunes,Prince Edward Island,Canada

The purpose of this study was to quantify relationships between season, sediment availability, sediment transport pathways, and beach/foredune morphology at Greenwich Dunes, PEI. This was done for periods ranging from a few days to multiple decades using erosion pins, bedframe measurements, annual surveys, and digital photogrammetry using historical aerial photographs. The relative significance of seasonal/annual processes versus response of the foredune system to broader geomorphic controls (e.g. relative sea level rise, storms, etc.) was also assessed. The data show that there are clear seasonal differences in the patterns of sand supply from the beach to the foredune at Greenwich and that there are differences in sediment supply to the foredune between the east and west reaches of the study area, resulting in ongoing differences in foredune morphology. They also demonstrate that models that incorporate wind climate alone, or even models that include other factors like beach moisture, would not be able to predict the amount of sediment movement from the beach to the foredune in this environment unless there were some way to parameterize system morphology, especially the presence or absence of a dune ramp. Finally, the data suggest that the foredune can migrate landward while maintaining its form via transfers of sediment from the stoss slope, over the crest, and onto the lee slope. Although the rate of foredune development or recovery after disturbance changes over time due to morphological feedback, the overall decadal evolution of the foredune system at Greenwich is consistent with, and supports, the Davidson‐Arnott (2005) conceptual model of dune transgression under rising sea level. Copyright © 2012 John Wiley & Sons, Ltd.     

Flow dynamics over a foredune scarp

The nature of wind flow over a small, 0.6 m high foredune scarp is investigated on the Sir Richard Peninsula, South Australia during a variety of incident wind directions and speeds. The study provides additional supporting evidence that the presence of the scarp and the dune exerts a strong influence on a landwards trending reduction in wind velocity and an increase in turbulence, with the greatest area of turbulence occurring near and at the foredune scarp base. For an incident oblique wind, an alongshore helicoidal flow is formed within a separation region along the scarp basal region. In this region, the coefficient of variation (CV) of wind speed is high and displays significant fluctuations. The flow at the scarp crest is compressed, streamlined and accelerated, turbulence is suppressed, and local jets may occur depending on the incident wind approach angle. Jets are more likely where the incident flow is perpendicular or nearly so. A flow separation region does not develop downwind of the scarp crest where the morphology of the foredune stoss slope downwind of the scarp is more convex (as in this case) rather than relatively flat, and possibly due to the presence of vegetation at the scarp crest. A tentative model of the flow regions developed across a backshore–scarp–foredune region during oblique incident flow is provided. © 2018 John Wiley & Sons, Ltd.     

High‐frequency sediment transport responses on a vegetated foredune

Wind flow and sand transport intensity were measured on the seaward slope of a vegetated foredune during a 16 h storm using an array of sonic anemometers and Wenglor laser particle counters. The foredune had a compound seaward slope with a wave‐cut scarp about 0.5 m high separating the upper vegetated portion from the lower dune ramp, which was bare of vegetation. Wind direction veered from obliquely offshore at the start of the event to obliquely onshore during the storm peak and finally to directly onshore during the final 2 h as wind speed dropped to below threshold. Sand transport was initially inhibited by a brief period of rain at the start of the event but as the surface dried and wind speed increased sand transport was initiated over the entire seaward slope. Transport intensity was quite variable both temporally and spatially on the upper slope as a result of fluctuating wind speed and direction, but overall magnitudes were similar over the whole length. Ten‐minute average transport intensity correlates strongly with mean wind speed measured at the dune crest, and there is also strong correlation between instantaneous wind speed and transport intensity measured at the same locations when the data are smoothed with a 10 s running mean. Transport on the beach for onshore winds is decoupled from that on the seaward slope above the small scarp when the wind angle is highly oblique, but for wind angles <45° from shore perpendicular some sand is transported onto the lower slope. Copyright © 2012 John Wiley & Sons, Ltd.     

Offshore aeolian sediment transport across a human‐modified foredune

Concepts derived from previous studies of offshore winds on natural dunes are evaluated on a dune maintained for shore protection during three offshore wind events. The potential for offshore winds to form a lee‐side eddy on the backshore or transfer sediment from the dune and berm crest to the water are evaluated, as are differences in wind speed and sediment transport on the dune crest, berm crest and a pedestrian access gap. The dune is 18–20 m wide near the base and has a crest 4.5 m above backshore elevation. Two sand‐trapping fences facilitate accretion. Data were obtained from wind vanes on the crest and lee of the dune and anemometers and sand traps placed across the dune, on the beach berm crest and in the access gap. Mean wind direction above the dune crest varied from 11 to 3 deg from shore normal. No persistent recirculation eddy occurred on the 12 deg seaward slope. Wind speed on the berm crest was 85–89% of speed at the dune crest, but rates of sediment transport were 2.27 times greater during the strongest winds, indicating that a wide beach overcomes the transport limitation of a dune barrier. Limited transport on the seaward dune ramp indicates that losses to the water are mostly from the backshore, not the dune. The seaward slope gains sand from the landward slope and dune crest. Sand fences causing accretion on the dune ramp during onshore winds lower the seaward slope and reduce the likelihood of detached flows during offshore winds. Transport rates are higher in access gaps than on the dune crest despite lower wind speeds because of flatter slopes and absence of vegetation. Transport rates across dunes and through gaps can be reduced using vegetation and raised walkover structures. Copyright © 2017 John Wiley & Sons, Ltd.     

Reynolds stress and sand transport over a foredune

Reynolds shear stress (RS = –u′ w′) and sand transport patterns over a vegetated foredune are explored using three‐dimensional velocity data from ultrasonic anemometers (at 0 · 2 and 1 · 2 m) and sand transport intensity from laser particle counters (at 0 · 014 m). A mid‐latitude cyclone on 3–4 May 2010 generated storm‐force winds (exceeding 20 m s^–1) that shifted from offshore to obliquely alongshore. Quadrant analysis was used to characterize the spatial variation of RS quadrant components (Q1 through Q4) and their relative contributions were parameterized using the flow exuberance relation, EX_FL = (Q1 + Q3)/(Q2 + Q4). The magnitudes of RS and sand transport varied somewhat independently over the dune as controlled by topographic forcing effects on flow dynamics. A ‘flow exuberance effect’ was evident such that Q2 (ejection‐like) and Q4 (sweep‐like) quadrants (that contribute positively to RS) dominated on the beach, dune toe, and lower stoss, whereas Q1 and Q3 (that contribute negatively to RS) dominated near the crest. This exuberance effect was not expressed, however, in sand transport patterns. Instead, Q1 and Q4, with above‐average streamwise velocity fluctuations (+u′), were most frequently associated with sand transport. Q4 activity corresponded with most sand transport at the beach, toe, and stoss locations (52, 60, 100%). At the crest, 25 to 86% of transport was associated with Q1 while Q4 corresponded with most of the remaining transport (13 to 59%). Thus, the relationship between sand transport and RS is not as straightforward as in traditional equations that relate flux to stress in increasing fashion. Generally, RS was poorly associated with sand transport partly because Q1 and Q4 contributions offset each other in RS calculations. Thus, large amounts of transport can occur with small RS. Turbulent kinetic energy or Reynolds normal stresses (u′², w′²) may provide stronger associations with sand transport over dunes, although challenges exist on how to normalize and compare these quantities. Copyright © 2013 John Wiley & Sons, Ltd.     

Aeolian sediment transport and morphologic change on a managed and an unmanaged foredune

Sediment transport and short‐term morphologic change were evaluated at a site where sand fences are deployed and the beach is raked (Managed Site) and a site where these human adjustments are not practiced (Unmanaged Site). Data were gathered across the seaward portion of a low foredune when winds blew nearly shore‐normal at mean speeds 8.9 to 9.3 m s^‐1. Data from traps revealed sediment transport rates at unvegetated portions of the foredune crest (40.2 to 43.5 kg m^‐1 h^‐1) were greater than on the backshore (4.9 to 11.2 kg m^‐1 h^‐1) due to onshore decreases in surface moisture and speed‐up of the wind passing over the foredune. Data from erosion pins indicate sediment input to the dune was 1.48 m³ m^‐1 alongshore at the Managed Site and 1.25 m³ m^‐1 at the Unmanaged Site. The Unmanaged Site had deposition at the dune toe, erosion at mid‐slope, and deposition at the crest. Deposition occurred at mid‐slope on the Managed Site near a partially buried (0.58 m high) fence with a porosity of about 65%. Deposition at partially buried wrack on the upper backshore and dune toe at the Unmanaged Site was about twice as great as deposition in this zone at the Managed Site. Results indicate that: (1) the seaward slope of the foredune can be a more important source of sand to the lee of the crest than the beach; (2) wrack near the toe can decrease transport into the foredune; (3) a scour zone can occur on the foredune slope above the wrack line; (4) a fence placed in this location can promote deposition and offset scour, but fences can restrict delivery of sediment farther inland. Evaluation of alternative configurations of fences and strategies for managing wrack is required to better determine the ways that humans modify foredunes. Copyright © 2012 John Wiley & Sons, Ltd.     

Aeolian sediment transport on a human‐altered foredune

Changes in wind speed and sediment transport are evaluated at a gap and adjacent crest of a 2 to 3 m high, 40 m wide foredune built by sand fences and vegetation plantings on a wide, nourished fine sand beach at Ocean City, New Jersey. Anemometer masts, cylindrical sand traps and erosion pins were placed on the beach and dune during two obliquely onshore wind events in February and March 2003. Results reveal that: (1) changes in the alongshore continuity of the beach and dune system can act as boundaries to aeolian transport when winds blow at an angle to the shoreline; (2) oblique winds blowing across poorly vegetated patches in the dune increase the potential for creating an irregular crest elevation; (3) transport rates and deflation rates can be greater within the foredune than on the beach, if the dune surface is poorly vegetated and the beach has not had time to dry following tidal inundation; (4) frozen ground does not prevent surface deflation; and (5) remnant sand fences and fresh storm wrack have great local but temporary effect on transport rates. Temporal and spatial differences due to sand fences and wrack, changes in sediment availability due to time‐dependent differences in surface moisture and frozen ground, combined with complex topography and patchy vegetation make it difficult to specify cause–effect relationships. Effects of individual roughness elements on the beach and dune on wind flow and sediment transport can be quantified at specific locations at the event scale, but extrapolation of each event to longer temporal and spatial scales remains qualitative. Copyright © 2006 John Wiley & Sons, Ltd.     

Aeolian sand transport at the Lanphere Dunes,Northern California

Aeolian sand transport was studied at the Lanphere Dunes, a coastal dune complex in northern California, by comparing slipface advance rates with transport predicted based on local wind data. The slipfaces of a 2·5 m high transverse ridge and 10 m high parabolic dune were monitored over a period of three months to estimate sand discharge. The study was performed during the dry season, which has the maximum sand‐driving potential. Over the three month study period, average sand discharge was 12·5 m³ per m width per year at the transverse ridge and 8·8 m³ per m width per year at the parabolic dune. A method was developed for modelling slipfaces that are sinuous and where sediment transport rates are not constant across the width of the slipface. Field measurements were used to generate three‐dimensional representations of dune slipfaces. Periodic measurements over the course of three months were used to compute the volume of displaced sediment. Theoretical sand transport was computed from local wind data using the Bagnold model and compared with the observed transport rates. Predicted rates were substantially lower than observed rates. Wind velocities rarely exceeded the threshold velocity. Discrepancies between the observed and predicted values appear to be caused by a combination of wind data recording procedures and differences between wind velocities at the anemometer location and the site where sand transport was measured. Wind data collected by weather bureaux have been utilized in numerous studies for modelling sediment transport. Such data typically have sample intervals of one hour or greater and are often averaged prior to reporting. The effect of averaging was investigated by comparing sand transport estimates based on daily average wind velocities with those based on the original hourly observations. The daily average data were depleted of high velocity winds and sand transport estimates were accordingly much lower than those based on the hourly data. Copyright © 2000 John Wiley & Sons, Ltd.     

Aeolian sediment transport on a recovering storm‐eroded foredune with sand fences

Studies of sediment transport on developed coasts provide perspective on how human adjustments alter natural processes. Deployment of sand‐trapping fences is a common adjustment that changes the characteristics of the dune ramp and its role in linking sediment transfers from the backshore to the foredune. Fence effects were evaluated in the field using anemometer arrays and vertical sediment traps placed across a beach and dune at Seaside Park, New Jersey, USA during onshore and longshore winds. The foredune is 18 m wide and 4.5 m above the backshore. The mean speed of onshore winds at 0.5 m elevation decreased by 17% from the berm crest to the upper ramp and 36% in the lee of a fence there. Sediment transport during mean wind speeds up to 8.0 m s^?1 at 0.5 m elevation was < 0.06 kg m^?1 h^?1 on the berm crest and backshore where fetch distances were < 45 m and surface sediment was relatively coarse (0.74–0.85 mm) but increased to 5.63 kg m^?1 h^?1 on the upper ramp aided by the longer fetch distances (up to 82 m) and finer grain size of the source sediment there (0.52 mm). Sediment transport along the berm crest and backshore during longshore winds, where fetch distances were > 200 m, was up to 58.69 kg m^?1 h^?1, about three orders of magnitude greater than during the onshore winds. Fences can displace the toe of the ramp farther seaward than would occur under natural conditions. They can create a gentler slope and change the shape of the ramp to a more convex form. A fence on the ramp can cut off a portion of sediment supply to the upper slope. Decisions about fence placement thus should consider these morphologic changes in addition to the effects on dune volume. Copyright © 2017 John Wiley & Sons, Ltd.     

Reach-scale changes in channel geometry and dynamics due to the coastal backwater effect: the lower Trinity River,Texas

In this paper we use multiple field surveys spanning several decades to systematically evaluate the geomorphic consequences of a change in flow hydraulics from uniform flow to backwater flow for the lower Trinity River in east Texas, USA. Spatial changes in lateral migration rate, channel geometry, and point bar size correspond to two distinct geomorphic zones. Within the upstream uniform flow reach, the river channel is defined by fully developed point bars and a high rate of lateral channel migration. This zone transitions where the median channel bottom elevation drops below sea level. At this point flow is affected by the backwater influence of the Trinity Bay water surface elevation, as opposed to being bed slope control dominated. The change in hydraulics within the backwater zone is reflected in the channel morphology, which is characterized by smaller point bars, narrower and more symmetrical cross-sectional channel geometry, lower channel migration rates, and little to no bend deformation or cutoffs. Studying the connection between channel geometry, river bend kinematics, sediment transport, and fluid mechanics in each zone provides a deeper understanding of the relationship between channel shape and river mechanics. © 2019 John Wiley & Sons, Ltd.     

Investigation of three‐dimensional wind flow behaviour over coastal dune morphology under offshore winds using computational fluid dynamics (CFD) and ultrasonic anemometry

The behaviour of offshore‐directed winds over coastal dune and beach morphology was examined using a combination of modelling (3‐D computational fluid dynamics (CFD)) and field measurement. Both model simulations and field measurements showed reversal of offshore flows at the back beach and creation of an onshore sediment transport potential. The influence of flow reversals on the beach‐dune transport system and foredune growth patterns has previously received little attention. Detailed wind flow measurements were made using an extensive array of mast‐mounted, 3‐D ultrasonic anemometers (50 Hz), arranged parallel to the dominant incident wind direction. Large eddy simulation (LES) of the offshore wind flow over the dune was conducted using the open‐source CFD tool openFOAM. The computational domain included a terrain model obtained by airborne LiDAR and detailed ground DGPS measurements. The computational grid (~22 million cells) included localized mesh refinement near the complex foredune terrain to capture finer details of the dune morphology that might affect wind flows on the adjacent beach. Measured and simulated wind flow are presented and discussed. The CFD simulations offer new insights into the flow mechanics associated with offshore winds and how the terrain steering of wind flow impacts on the geomorphological behaviour of the dune system. Simulation of 3‐D wind flows over complex terrain such as dune systems, presents a valuable new tool for geomorphological research, as it enables new insights into the relationship between the wind field and the underlying topography. The results show that offshore and obliquely offshore winds result in flow reversal and onshore directed winds at distances of up to 20 m from the embryo dune toe. The potential geomorphological significance of the findings are discussed and simple calculations show that incoming offshore and obliquely offshore winds with mean velocities over 13 m s^?1 and 7 m s^?1, respectively, have the potential to create onshore‐directed winds at the back beach with mean velocities above 3.3 m s^?1. These are above the threshold of movement for dry sand and support previous conclusions about the significance of offshore winds in dune and beach budget calculations. Copyright © 2011 John Wiley & Sons, Ltd.     

Beach–dune sediment budgets and dune morphodynamics following coastal dune restoration,Wickaninnish Dunes,Canada

The results from three years of surveying and monitoring a dynamic foredune and dunefield restoration effort on Vancouver Island, Canada is presented. Complete removal of foredune vegetation occurred in three phases spaced a year apart in an effort to control invasive Ammophila spp. The collection of airborne LiDAR, orthophotographs, and bi‐monthly topographic surveys provided a means to quantify and examine sediment budgets and geomorphic responses. Three survey swaths, corresponding with each phase of vegetation removal, were established to provide detailed topographic coverage over the impacted beach, foredune, and dunefield landscape units. The swath corresponding with the first phase of removal recorded a positive sediment budget of 1·3 m³ m^?2 after three years. A control swath, with data collected for a year prior and two years following removal, exhibited a distinct pulse of sediment delivery into the dunefield unit with a maximum gain of 0·03 m³ m^?2 pre‐removal compared to 0·11 m³ m^?2 post‐removal. Vegetation analysis zones, associated with each of the three swaths, demonstrate a range of vegetation responses due to variation in the vegetation removal and subsequent re‐invasion or removal methods employed. The first site to be cleared of vegetation, received ongoing invasive re‐growth control, and three years following removal vegetation cover dropped from 57% in 2009 to 13% in 2012 (?44%). An adjacent site was cleared of vegetation two years later (only one year of recovery) but experienced rapid Ammophila re‐invasion and percent cover changed from 61% in 2009 to 26% in 2012 (?35%). The data presented provides insights for improving the application of sediment budget monitoring in dynamic restorations and discusses the potential for detailed spatial–temporal survey data to improve our understanding of meso‐scale landscape morphodynamics following foredune disturbance. Overall, the vegetation removal treatments reduced the extent of invasive grass and increased dunefield mobility and dynamic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of Time-dependent Moisture Content of Surface Sediments on Aeolian Transport Rates Across a Beach,Wildwood, New Jersey,U.S.A.

A one-day field investigation on an unvegetated backbeach documents the importance of surface sediment drying to aeolian transport. Surface sediments were well sorted fine sand. Moisture content of samples taken in the moist areas on the backbeach varied from 2·9 to 9·2 per cent. Lack of dry sediment inhibited transport prior to 08:50. By 09:10 conspicuous streamers of dry sand moved across the moist surface. Barchan-shaped bedforms, 30 to 40 mm high and composed of dry sand (moisture content <0·10 per cent), formed where sand streamers converged. The surface composed of dry sand increased from 5 per cent of the area of the backbeach at 09:50 to 90 per cent by 12:50 Mean wind speeds were beetween 5·6 and 8·6 m s⁻¹ at 6 m above the backbeach. Corresponding shear velocities were always above the entrainment threshold for dry sand and below the threshold for the moist sand on the backbeach. Measured rates of sand trapped (by vertical cylindrical traps) increased during the day relative to calculated rates. The measured rate of sand trapped on the moist foreshore was higher than the rate trapped on the backbeach during the same interval, indicating that the moist foreshore (moisture content 18 per cent) was an efficient transport surface for sediment delivered from the dry portion of the beach upwind. Measured rates of sand trapped show no clear relationship to shear velocities unless time-dependent surface moisture content is considered. Results document conditions that describe transport across moist surfaces in terms of four stages including: (1) entrainment of moist sediment from a moist surface; (2) in situ drying of surface grains from a moist surface followed by transport across the surface; (3) entrainment and transport of dry sediment from bedforms that have accumulated on the moist surface; and (4) entrainment of sand from a dry upwind source and transport across a moist downwind surface. © 1997 John Wiley & Sons, Ltd.     

Airflow and aeolian sediment transport patterns within a coastal trough blowout during lateral wind conditions

Blowouts are depressions that occur on coastal dunes, deserts and grasslands. The absence of vegetation in blowouts permits high speed winds to entrain and remove sediment. Whereas much research has examined patterns of wind flow and sediment transport on the stoss slopes and lee of sand dunes, no study has yet investigated the connections between secondary air‐flow structures and sediment transport in a blowout where zones of streamline compression, expansion and steering are less clearly delineated. In this study we investigated the variability of sediment flux and its relation to near‐surface wind speed and turbulence within a trough blowout during wind flow that was oblique to the axis of the blowout. Wind flow was measured using six, three‐dimensional (3D) ultrasonic anemometers while sediment flux by eight sand traps, all operating at 25 Hz. Results demonstrated that sediment flux rates were highly variable throughout the blowout deflation basin, even over short distances (< 0.5 m). Where flow was steadiest, flux was greatest. Consequently the highest rates of sediment transport were recorded on the erosional wall crest where flow was compressed and accelerated. The strength of correlation between sediment flux and wind parameter improved with an increase in averaging interval, from 10 seconds to 1 minute. At an interval of 10 seconds, however, wind speed correlated best with flux at seven of eight traps, whereas at an interval of one minute Turbulent Kinetic Energy (TKE) provided the best correlation with flux at six of the eight traps. Correlation between sediment flux and wind parameters was best in the centre of the blowout and poorest on the erosional wall crest. The evidence from this paper suggests, for the first time, that TKE may be a better predictor of sediment transport at minute scale averaging intervals, particularly over landforms where wind flow is highly turbulent. Copyright © 2014 John Wiley & Sons, Ltd.     

Aeolian processes across transverse dunes. II: modelling the sediment transport and profile development

This paper discusses a model which simulates dune development resulting from aeolian saltation transport. The model was developed for application to coastal foredunes, but is also applicable to sandy deserts with transverse dunes. Sediment transport is calculated using published deterministic and empirical relationships, describing the influence of meteorological conditions, topography, sediment characteristics and vegetation. A so-called adaptation length is incorporated to calculate the development of transport equilibrium along the profile. Changes in topography are derived from the predicted transport, using the continuity equation. Vegetation height is incorporated in the model as a dynamic variable. Vegetation can be buried during transport events, which results in important changes in the sediment transport rates. The sediment transport model is dynamically linked to a second-order closure air flow model, which predicts friction velocities over the profile, influenced by topography and surface roughness. Modelling results are shown for (a) the growth and migration of bare, initially sine-shaped dunes, and (b) dune building on a partly vegetated and initially flat surface. Results show that the bare symmetrical dunes change into asymmetric shapes with a slipface on the lee side. This result could only be achieved in combination with the secondorder closure model for the calculation of air flow. The simulations with the partly vegetated surfaces reveal that the resulting dune morphology strongly depends on the value of the adaptation length parameter and on the vegetation height. The latter result implies that the dynamical interaction between aeolian activity and vegetation (reaction to burial, growth rates) is highly relevant in dune geomorphology and deserves much attention in future studies. Copyright © 1999 John Wiley & Sons, Ltd.     

The influence of topography and approach angles on local deflections of airflow within a coastal blowout

The spatial variability of air flow through complex topography is an important, but not fully understood, component of dune development and dynamics. This study examines the spatial variability of the wind field in a linear blowout in coastal dunes at Jockey's Ridge State Park, on the Outer Banks of North Carolina. A spatial array of single‐height anemometers and wind vanes were placed within the blowout. Topography exerted a significant steering effect when onshore winds approached from directions within 50° of the blowout axis. Under those conditions wind flow in the blowout aligned to the axis regardless of approach angle, maximizing the potential for erosion and transport in the trough. In other locations aspect variations caused deflection both proportional and disproportional to changes in the approaching wind. When prevailing winds approached from directions more oblique than 50° to the blowout axis, topographic steering through the blowout trough was reduced and secondary flow generated by flow separation over the trough became more prominent. During those approach angles, wind directions and speeds within the upper blowout trough became erratic as vortices and turbulence dominated the flow, minimizing transport potential. The changing characteristics of airflow in the blowout relative to differing approach angles has implications on dune development and variations in transport potential under changing conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Morphodynamics and climate controls of two aeolian blowouts on the northern Great Plains,Canada

Blowouts are the most regionally pervasive active aeolian landform on the northern Great Plains of North America. This study reports a long‐term investigation into the morphological development of two adjacent blowouts in a continental dune field. The blowouts were monitored for a decade in the Bigstick Sand Hills of southwestern Saskatchewan, Canada. Topographic changes were determined from dense arrays of erosion pins in each blowout (1 per 4 m², n = 171; and 1 per 16 m², n = 150). Pin measurements were made 16 times between May 1994 and May 2004. Over the decade both blowouts expanded and more than doubled in volume. Differences in form–flow interactions have caused the larger of the two blowouts to deposit more than a metre of sediment within the deflation basin, and the smaller blowout to erode by more than a metre. A negative feedback effect was triggered when the larger blowout reached a critical size around 1994 (60 m × 36 m × 8·1 m, length × width × height) when sediment was no longer eroded from the deflation basin. A positive feedback in the smaller blowout continues to facilitate erosion from the deflation basin. Monthly observations since 2002 indicate that aspect plays an important role in the development of these blowouts by creating a spatial asymmetry in sediment availability. Sediment is more readily available throughout the year on south‐facing slopes, which receive greater insolation than north‐facing slopes and are often drier and more frequently thawed in this cold‐climate environment. Comparisons between climate data from a remote meteorological station 45 km to the southwest and sediment transport indices developed from the erosion pin data produced very few correlations significant at the 95 per cent confidence level. Nevertheless, the signs of the correlation coefficients indicate that sediment erosion and deposition in both blowouts respond similarly to the following climate variables recorded at the remote station: (i) the amount of precipitation, (ii) the transport capacity of the wind and (iii) transporting winds from a directional wedge between 180 and 330°. Taken altogether, the results from this study highlight the importance of climate and feedback effects in blowout development that may be extended to other blowouts in continental and coastal settings. Copyright © 2006 John Wiley & Sons, Ltd.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.