共查询到20条相似文献,搜索用时 328 毫秒
1.
2.
3.
SMW工法是一种广泛应用于基坑围护、软基处理、筑堤等领域,以多轴型钻机在钻掘的同时在钻头处喷出水泥浆液与地基土反复混合搅拌,然后插入H型钢,在水泥土固结后与型钢共同作用形成具有一定刚度和强度连续的墙体施工方法。本工程南面距现有建筑物近,基坑开挖深度大,其他各种施工方法无法在不破坏土体的前提下形成围护墙体。结合工程实例介绍了SMW工法桩的设计、施工过程、工程检测及质量控制要点。应用表明,SMW工法具有工程造价低、工期短、环境污染少等优点,具有挡土和止水的双重作用,在珠江三角洲地区的基坑围护、软弱地基处理等工程中具有重要的应用价值。 相似文献
4.
渠式切割水泥土连续墙(简称TRD 工法)是近几年从国外引进的一种新型地下水泥土墙的施工方法。结合工程实例,对TRD工法的成墙原理、施工工艺、施工要点、适用范围等进行了介绍,并对TRD工法在实际应用中的优缺点进行了分析。工程实践证明,TRD工法在基坑工程挡土及隔渗止水方面具有明显的技术优势。 相似文献
5.
6.
通过新疆小山口水电站基础石方开挖工程实践,对当地泥岩和砂岩地质物理特性进行了深入研究,对其石方开挖工法进行了大胆创新,提出了纯机械法施工工法,分别从工程施工质量、进度、安全和成本等多个方面与传统的钻爆法进行比较,结果表明:新施工工法县有技术先进性和经济合理性,可以在今后的施工中使用和椎广。 相似文献
7.
8.
《岩土工程技术》2015,(1)
曹妃甸数字化煤炭储配基地工程的建设场地是围海造地形成的,上部为软弱且具有中等液化的吹填土地层,而拟建构筑物对地基强度和变形均要求很高,地基承载力要求达到320 kPa,变形控制要求严格。针对此种地层情况和构筑物特征,设计方案提出采用刚-柔性桩复合地基方案,结合两种工法的优势,柔性桩有效加固桩间土,消除负摩阻力和液化;而刚性桩则大幅提高承载力、控制沉降。着重介绍了该工法的设计理念、复合地基承载力和沉降计算模式,通过具体工程实例、设计方案和试验性施工情况的介绍,阐述了该工法的优点和应用。实践证明,该工法具有良好的经济和社会效益,值得在类似地区类似工程场地大规模应用。 相似文献
9.
10.
《地质科技情报》2016,(2)
水平定向钻工法和顶管工法都具有高效、环保、不影响交通、不开挖地表等优点,但对于穿越距离长、地形地质条件复杂等具有挑战性的工况,单一穿跨越形式由于其自身工艺的局限性很难满足工程实施要求,如果采用联合穿跨越,可充分利用各种穿跨越方式的技术优势,有效降低施工难度、节省投资、更有利于工程安全顺利实施。目前国内外对于这种联合穿跨越结构形式应用较少,理论研究较为匮乏,未形成成熟的理论和施工技术,针对水平定向钻和顶管工法结合的可行性进行了分析,并且针对最关键的管道曲率半径和顶管始发井长度进行了定量的分析。计算结果表明,钢管不适合直接从顶管始发坑中回拖,而PE管道在直径较小和深度不大时能直接通过顶管始发井进行回拖,节省工程成本。 相似文献
11.
塌孔、缩径是桩基成孔施工中经常出现的问题,成孔的质量直接影响钻孔灌注桩桩体的质量。目前的成孔施工中除了下套管之外最有效的护壁方法就是采用防塌泥浆护壁。通过对各种组分泥浆试验性能参数的比较与分析,优选出防塌泥浆最佳配方,从而提高钻孔灌注桩成孔施工中孔壁的稳定性。 相似文献
12.
护壁对于人工挖孔桩成孔过程中防止土体塌落及滑动有着极为重要的作用,是施工中保障人员安全和工程质量的主要构件。针对人工挖孔桩的护壁设计问题,分灌注桩和空桩两种工况分别建立了力学分析模型,以护壁的抗拉强度和水平位移作为护壁失效的控制条件,结合桩间土受力模型,提出了预防窜孔问题的人工挖孔桩护壁设计方法。将本文提出的新的设计方法应用于实际工程,结果表明了本文方法的合理性,并根据实际应用结果提出了施工建议。研究成果对人工挖孔桩护壁的设计与施工安全有积极的指导和借鉴意义。 相似文献
13.
Numerical studies of anchored sheet pile wall behavior constructed in cut and fill conditions 总被引:1,自引:0,他引:1
The construction of sheet pile walls may involve either excavation of soils in front or backfilling of soils behind the wall. These construction procedures generate different loading conditions in the soil and therefore different wall behavior should also be expected. The conventional methods, which are based on limit equilibrium approach, commonly used in the design of anchored sheet pile walls do not consider the method of construction. However, continuum mechanics numerical methods, such as finite element method, make it possible to incorporate the construction method during the analyses and design of sheet pile walls. The effect of wall construction type for varying soil conditions and wall heights were investigated using finite element modeling and analysis. The influence of construction method on soil behavior, wall deformations, wall bending moments, and anchor forces were investigated. The study results indicate that walls constructed by backfill method yield significantly higher bending moments and wall deformations. This paper presents the results of the numerical parametric study performed and comparative analyses of the anchored sheet pile walls constructed by different construction methods. 相似文献
14.
排桩式地下连续墙技术,采用钻孔灌注桩及相应配套技术,已发展成为软土地层深基坑开挖的支挡结构一项重要手段。结合施工实践,论述了排桩桩型结构设计、配套技术的发展、施工技术与质量控制等方面的问题。 相似文献
15.
SMW工法的工程应用和技术进步 总被引:4,自引:0,他引:4
本文介绍了在水泥土搅拌中插入型钢形成一种新型的地下连续墙支结构(SMW墙),该墙体充分利用了水泥土搅拌桩的高止水性和型钢所具有的强度和刚度;而在完成基坑之后,可取出型钢,供重复使用,这种不仅降低了工程造价,而且减少了墙体的厚度,在窄小的施工场地特别适用。 相似文献
16.
17.
18.
19.
20.
S. Henke 《国际地质力学数值与分析法杂志》2010,34(11):1191-1210
Pile installation leads to significant changes in the main state variables of the surrounding soil. In addition, the installation process may have an influence on adjacent or intersecting structures such as pile grillages. In this paper, three‐dimensional numerical analyses are presented to investigate the effects of pile driving with open or closed cross‐sections on the surrounding soil and on adjacent structures. Two different installation methods are used: quasi‐static pile jacking and vibratory pile driving. The numerical models are evaluated and verified using data from field tests performed in situ during the construction of the quay wall at the container terminal CT4 in Bremerhaven. Two case studies are presented to characterize the main influence factors for additional loading on adjacent structures due to pile installation. Finally, a parametric study is conducted showing the influence of the installation method, pile cross‐section and distance of a pile from an existing structure on the additional loading for this structure. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献