Inversion of fold-hinge in superposed folding: An example from the Precambrian of central Rajasthan,India

Axial culminations and depressions of folds are common in regions of superposed deformations involving two sets of folds at high angles to each other. If the intensity of the later folding in these cases exceeds a particular limit, plunge reversal of the early folds gives way to “plunge inversion”. In such instances, segments of early folds rotate through end-on or reclined geometry while being refolded. And instead of plunge reversal at the hinge zones of later folds, the early folds plunge in the same direction in both limbs of the later folds. As a result, an antiform will pass along the axial trend to a synform. A particularly clear instance of plunge inversion has been noted from the “Sawar outlier” comprising a metasedimentary sequence within the older Banded Gneissic Complex in central Rajasthan. In Sawar, the southern segment of a south-southwest-trending synformal early fold has been inverted to attain an antiformal geometry because of superposition of a later fold at high angles to the early fold axes and axial planes. The deformation history of the large-scale folds has been traced and the stratigraphic implications of the plunge inversion discussed. From the movement pattern, it seems justifiable to correlate the metasedimentary sequence of the outlier with the Late Precambrian Delhi Group of parametamorphic rocks.     

Progressive deformation and the rotation of contemporary fold axes in the Ballybofey Nappe,north-west Ireland

Internal regions of orogenic belts may be characterized by an alignment of fold axes with mineral elongation lineations. This relationship is commonly interpreted as representing progressive tightening and rotation towards the shear direction of early buckle folds, the hinges of which were initiated orthogonal to this direction. Detailed structural analysis of lower amphibolite facies Dalradian metasediments of the Ballybofey (fold) Nappe, north-west Ireland, shows that an intense S₃ schistosity is developed axial planar to mesoscopic and minor F₃ folds. In areas of low D₃ strain, F₃ fold axes plunge gently towards the north-east, whereas in regions of greater strain plunges are towards the south-east subparallel to the constant mineral lineation. Minor folds which initiated at angles of 70–80° from the mineral lineation subsequently rotated towards the shear direction in a consistent clockwise sense. Progressive and variable non-coaxial deformation oblique to the original mean F₃ orientation has resulted in a unimodal distribution pattern of fold axes. Analysis of the angular rotation of fold axes enables estimates of the bulk shear strain to be evaluated and models of progressive deformation to be assessed.     

Structures in the banded iron-formation of the southeastern Bababudan Hills, Karnataka, India

The banded iron-formation in the southeastern Bababudan Hills display a macroscopic synformal bend gently plunging towards WNW. The bedding planes in smaller individual sectors show a cylindrical or conical pattern of folding. The dominant set of minor folds has WNW-ESE trending axial planes and the axes plunge towards WNW at gentle to moderate angles, though there is considerable variation in orientation of both axes and axial planes. A later set of sporadically observed folds has N-S trending axial planes. The macroscopic synformal bend within the study area forms the southeastern corner of a horseshoe shaped regional synformal fold closure which encompasses the entire Bababudan range. The minor folds are buckle folds modified to a varying extent by flattening. In some examples the quartzose layers appear to be more competent than the ferruginous layers; in others the reverse is true. The folds are frequently noncylindrical and the axes show curvature with branching and en echelon patterns. Such patterns are interpreted to be the result of complex linking of progressively growing folds whose initiation is controlled by the presence of original perturbations in the layers. Domes and basins have at places developed as a result of shortening along two perpendicular directions in a constrictional type of strain. Development of folds at different stages of progressive deformation has given rise to nonparallelism of fold axes and axial planes. The axes and axial planes of smaller folds developed on the limbs of a larger fold are often oriented oblique to those of the latter. Progressive deformation has caused rotation and bending of axial planes of earlier formed folds by those developed at later stages of the same deformational episode. Coaxial recumbent to nearly reclined fold locally encountered on the N-S limb of the macroscopic fold may belong to an earlier episode of deformation or to the early stage of the main deformation episode. The E-W to ESE-WNW strike of axial plane of the regional fold system in the Bababudan belt contrasts with the N-S to NNW-SSE strike of axial planes of the main fold system in the Chitradurga and other schist belts of Karnataka.     

Pre‐Cenomanian vs. Cenozoic folding in the High Atlas revealed by palaeomagnetic data

Palaeomagnetic data, and specifically remagnetizations, are used to constrain the geometric reconstruction at 100 Ma of three anticlines cored by gabbroic intrusions and Triassic shales in the Central High Atlas, Morocco. Previous palaeomagnetic results have revealed that the Mesozoic sediments of this region acquired a pervasive remagnetization at the end of the Early Cretaceous. The restoration of palaeomagnetic vectors to the remagnetization stage (100 Ma) allows us to determine the dip of the beds during this period and, thereby, to reconstruct structures during that time and determine the relative contributions of Mesozoic magmatic/diapiric uplift vs. Cenozoic compression to the present‐day dip. Our results indicate that three major anticlines in the Central High Atlas (Tasraft, Tassent and Tissila) were initiated to different degrees before the Late Cretaceous and were reactivated during Cenozoic compression to acquire their present‐day geometry. We also discuss the origin of these structures.     

Alpine remagnetization and tectonic rotations in the French Pyrenees

A palaeomagnetic study of the 100 to 90 m.y. old alkaline igneous rocks of the French Pyrenees has in part revealed large between-site scatter caused by highly variable declination. Magnetomineralogical evidence suggests that the original titano-magnetite has undergone variable low-temperature oxidation through martitization and maghemitization processes, suggesting that the rocks have been remagnetized. When viewed in the context of the Upper Cretaceous–Lower Tertiary inclination pattern based on Portuguese palaeomagnetic data, it is concluded that the rocks most likely acquired their present magnetization during early Campanian–Maastrichtian time, i.e. 20-30 m.y. after their original cooling. On the other hand, this magnetization postdates a major phase of late Cretaceous compressive deformation. Subsequent strike-slip movement along the Pyrenean zone in the Lower Tertiary led to variable rotation of cover units along the orogenic belt, producing the inconsistent palaeomagnetic declination picture presently observed. It is concluded that the geological history of the alkaline rocks of the French Pyrenees, from the magmatic stage to the subsequent events of remagnetization and tectonic deformation, is strongly associated with the Alpine-age rotational instability of Iberia. The principal kinematic history of the Peninsula comprised ca. 40° counterclockwise rotation (relative to Europe) during Cenomanian– Turonian time (100–90 m.y. ago) followed by ca. 70° clockwise rotation in the early Campanian (ca. 75 m.y. ago).     

华北克拉通东部地块和大别—苏鲁造山带印支期褶皱-逆冲构造与动力学背景

大别-苏鲁造山带不同岩片(块)经历了不同的褶皱变形.榴辉岩块(或透镜体)和硬玉石英岩片经历了高压-超高压背景下的两幕褶皱变形之后,在区域性第一幕变形期间主要发生透镜化为主,后期与围岩共同经历紧闭同斜第二幕褶皱.而其它岩片主要经历了现今野外可见的区域性三幕褶皱,其中区域性第一幕褶皱为片内残留褶皱,在斜长角闪岩透镜体中多见,宏观规律不明.区域性第二幕褶皱在露头尺度多见,轴面为折劈理,局部强烈置换成片理化带(复合片理或第二期片理),恢复第三幕褶皱改造作用后,揭示出各种岩片中的各级尺度的第二幕褶皱都为轴面北西倾南东倒、轴迹走向为NNE向的紧闭不对称褶皱,不对称性一致反映其指向与各种岩片向南东的逆冲运动有关.第三幕褶皱为以片理或折劈理为变形面的宽缓褶皱,轴迹走向NWW,枢纽向西倾伏.韧性剪切带为非透入性构造,分早晚两期,早期为韧性逆冲,新县穹隆以南,运动学标志指示向北逆冲,错切第二幕褶皱,结合新县穹隆北部向南的逆冲特征,反映这些韧性逆冲断层多数为第二幕大型褶皱翼部的次级逆冲断层;晚期为韧性滑脱带,其发育局限于几个岩性差异较大的接触带,带内伸展型折劈理发育,并对挤压构造样式有重要的改造作用.华北克拉通东部地块是华北克拉通的重要组成,其盖层古生界和三叠系在印支运动期间经历了一幕宽缓褶皱作用,其轴迹方向主体也为NWW向.这一褶皱构造明显在变形时间、变形样式和展布方向上都和大别-苏鲁造山带中的第三幕褶皱非常一致,说明它们具有动力学上的必然联系.同时,研究表明在华北克拉通东部地块中没有经历大别-苏鲁造山带中区域性第一、第二幕褶皱变形的记录,故本文认为印支期这两幕变形主要发生在华北板块东南缘的边界上,并没有波及到板内,而且从东向西高压-超高压岩石剥露具有穿时性.只有当华北板块和华南板块在第二幕变形之后构成了统一块体后,第三幕变形才波及华北板内.     

On the Structure and Metamorphism of the Roc de Frausa Massif (Eastern Pyrenees)

Abstract

The Roc de Frausa Massif, located at the Eastern Pyrenees, is formed by a stratoid Pre-Hercynian deformed granite (orthogneiss) interbedded with metasedimentary series. Hercynian granitoids (St. Llorenç — La Jonquera pluton) surround the southern and eastern part of the massif and Hercynian basic igneous rocks (Ceret stock) occupy the central part of it. The Pre-Hercynian granite and the sedimentary series were involved, during the Hercynian orogeny, in complex polyphasic tectonics and metamorphism. As a result, an ubiquitous penetrative foliation was developed during the earlier stages. This foliation was subsequently folded into a complex antiformal structural formed by a double dome : Roc de Frausa dome and Mas Blanc dome. Main lithological boundaries (gneiss — metasediments and metasediments — granitoids) are broadly parallel to the regional foliation, and they all display the dome geometry. Interference fold pattern between two late phases, an ealier one with NE-SW trending folds and a younger one with NW-SE trending folds is responsible for the dome geometry. Mylonitic deformation, with W-E to NW-SE orientations has been attributed to the last folding phase. Regional metamorphic climax and contact metamorphism, the last one resulting from Hercynian granitoid emplacement, preceeded the above mentioned late folding event, which developed under retrograde metamorphic conditions. Regional peak metamorphism is recognized by the static crystallization of cordierite + potassium feldspar. This paragenesis indicates pressure — temperature conditions of about 3.1 Kbar and 660 °C maximum. Contact metamorphism overprints the earlier regional metamorphism. Parageneses and thermal gradient of contact metamorphism around La Jonquera pluton are very similar to those related to regional metamorphism, whereas parageneses produced around Ceret stock present garnet + potassium feldspar. Geothermometry indicates metamorphic conditions locally higher for this paragenesis (around 700 °C).     

Episodic Mesozoic constructional events of central South China: constraints from lines of evidence of superimposed folds,fault kinematic analysis,and magma geochronology

ABSTRACT

The South China block (SCB), located in the convergence zones of the western Pacific subduction tectonic domain and Tethyan tectonic domain, has experienced complex tectonic processes, including the continent–continent collision caused by the closure of the Palaeo-Tethys Ocean, and the subduction of the Palaeo-Pacific plate. However, due to complex intracontinental deformation and abundant magmatism, there are serious divergences in the corresponding records of the tectonic transformation from Palaeo-Tethys to Palaeo-Pacific. We have analysed the map-scale superimposed fold system developed in central SCB and also inverted the palaeo-stress field based on the fault–slip vectors. On this basis, the deformation styles and superposition mechanism of two-stage folds were recovered to establish the tectonic stress field in early Mesozoic and tectono-magmatic events by combining the chronology of the accompanying syntectonic magma. The early E–W/WNW-trending folds and Triassic magmatic system were identified; these were controlled by the NE–SW-trending compressive stress field, to coordinate with the collisions between the SCB and the Indochina block in the southwest, and the North China block in the north. The late NE/NNE-trending folds superimposed on the early folds in an orthogonal way to form a large-scale dome-basin superimposed fold system, which were controlled by the WNW–ESE-trending compressive stress field. According to the strata relations involved in deformation and the chronology data of magmatic rocks, it could be determined that NE/ENE-trending folds would be formed during the Mid- to Late Jurassic, corresponding to the westward subduction events of the Palaeo-Pacific plate. The establishment of the large-scale superimposed fold styles and the identification of fold deformation in the Triassic and Jurassic are important for understanding the early Mesozoic tectonics of South China, and even for all East Asia continent. In particular, it can provide important temporal and spatial constraints to explain the complex deformation process and geodynamic settings of South China in the early Mesozoic.     

Thrust-controlled, gold quartz-vein mineralisation at the Tom's Gully mine, Northern Territory, Australia

Metasedimentary and minor metavolcanic rocks of the Early Proterozoic Pine Creek Inlier rest unconformably on Late Archaean granitic basement. Three basin-wide, regional deformation events at ca.1885–1870 Ma are recognised: I) W- to NW-verging thrusts and recumbent folds (D₂), II) upright, open to tight, doubly-plunging, NNE- to NNW-trending folds (D₃), and III) open, upright, E-trending folds (D₄). In the centre of the Pine Creek Inlier, post-tectonic granites (1835–1820 Ma) are spatially, temporally and probably genetically associated with mesothermal gold-quartz vein deposits. The Tom's Gully deposit consists of a shallowly S-dipping quartz reef in graphitic shale and siltstone within the thermal aureole of the post-tectonic (1831 ± 6 Ma) Mt Bundey pluton. Gold mineralisation comprises two(?) SSW-plunging sulphidic ore-shoots which are intimately associated with brecciation and recrystallisation of early barren quartz. Where early quartz is absent from the thrust, gold mineralisation is not developed, indicating that this secondary brittle fracturing was essential to sulphide and gold deposition. The ore-shoots plunge parallel to the trend of D₃ fold axes. The reef is hosted by a D₂ thrust fault with transport to the NW. D₃ folds in the hangingwall and footwall decrease in amplitude toward the reef indicating that, during continued E-W compression, the thrust acted as a décollement zone. Field relationships and microstructural studies suggest that quartz and sulphide were deposited in a reactivated thrust during wrench shear along several NNE-trending faults associated with emplacement of the Mt Bundey pluton.     

皖南-浙西地区盖层褶皱构造形迹特征

前人对皖南-浙西地区古生代至早中生代盖层中发育的褶皱变形期次、特征和构造样式的认识尚存在较多分歧。本文通过区内盖层褶皱变形调查与解析,除印支早期褶皱和燕山期构造外,新识别出加里东期和印支晚期褶皱。加里东期褶皱样式主要表现为大型中常至开阔褶皱,且均为复式褶皱;次为小型紧闭褶皱,二者可能为从属性质。其构造线均呈近东西向或北东东向。印支早期褶皱样式主要为中常线形褶皱,其轴迹呈北东向;晚期表现为中常至开阔褶皱样式,轴迹呈北北西或近南北向。燕山期构造主要为盆地和断裂构造。早白垩世早期,表现为同沉积宽缓向斜,构造线呈近东西向;早白垩世之后,主要表现为断陷盆地和断裂构造,构造线呈北东或北北东向。各期褶皱叠加明显,形成"L"或"厂"字型组合特征,或形成构造穹窿-盆地组合。深入研究构造特征及演化规律,对区域构造格架建立具有重要意义。     

Deformational and crystallization history of the Precambrian rocks in north-central Aravalli Mountain,Rajasthan, India

Large-scale structures, textures and mineral assemblages in the Precambrian rocks of the Banded Gneissic Complex and the overlying Delhi Group in north-central Aravalli Mountain reveal a complex deformational-crystallization history. In the basement Gneissic Complex at least three deformational events, D₀, D₁ and D₂, and two separate episodes of metamorphism, M₁ and M₂, are recognized. The supracrustal Delhi Rocks display only two phases of deformation, D₁ and D₂, associated with a single protracted period of metamorphism, M₂.The first phase of deformation (D₁) of the Delhi orogeny (1650-900 m.y.) produced large isoclinal folds that are overturned towards the southeast and have gentle plunges in NE and SW directions. The second phase of deformation (D₂) gave rise to tight open folds on the limbs and axial-plane surfaces of the D₁ folds. These folds generally plunge towards the N and NNW at 30°–80°. In the Basement Complex one more deformation (D₀) of the Pre-Delhi orogeny (> 2000 m.y.) is recorded by the presence of reclined and recumbent folds with W to WNW trending fold axes. The D₀ folds were superimposed by D₁ and D₂ folds during the Delhi orogeny.The three deformational events have been correlated with the crystallization periods of minerals in the rocks and a setting in time is established for this part of the Aravalli range.     

Les plis hercyniens kilométriques couchés vers l'ouest-sud-ouest dans la région du pic du Midi d'Ossau–col du Somport (zone axiale des Pyrénées occidentales)Kilometric westward Hercynian recumbent folds in the western Pyrenees (Pic du Midi d'Ossau area)

The Palaeozoic of the western Pyrenees shows two superposed tectonics easily defined by their different geometry and the major unconformity of the Permian sediments and volcanics on the Devono-Carboniferous series: an Hercynian tectonic found only in the pre-Permian series, characterised by kilometric westward recumbent folds with a weak cleavage; a Pyrenean tectonic, characterised by tight east–west folds, upright to overturned to the south with slaty cleavage, which is the only deformation found in the Permian and Mesozoic series and the second deformation in the pre-Permian Palaeozoic. The Hercynian folding, roughly perpendicular to the trend of the Pyrenees characterises the northern branch of the Ibero-Armorican virgation. To cite this article: P. Matte, C. R. Geoscience 334 (2002) 773–779.     

西准噶尔野鸭沟地区褶皱冲断构造的特征及意义

西准噶尔地区的褶皱冲断带多被认为是向东南逆冲的。在东部野鸭沟发育的褶皱冲断构造中识别出顶端指向北西的褶皱组合。褶皱自北西向南东逐渐由直立褶皱转变为斜歪褶皱,最后褶皱北西翼发生倒转而倾向南东,表明它们的极性指向北西;褶皱翼间角也由110°转变为60°左右,显示野鸭沟褶皱自北西向南东变形程度逐渐增强。根据卷入褶皱冲断带最年轻的地层为石炭系,又被307Ma的闪长岩穿切的事实,认为该褶皱冲断带形成于晚石炭世的顶端指向北西的剪切环境。     

Analogue models of folds above a wrench fault

This paper describes the experimental deformation of models made with sheets of paraffin wax, simulating a bedded cover resting on a basement wrench fault. During the experiments, “en échelon” folds appear in the cover. As a result of early fault motion, folds first appear at heterogeneities in the bedding and with axes at about 45° to the trace of the wrench fault. Further fault displacement causes a bulk rotation of fold axes towards parallelism with the basement wrench fault, and a resulting curvature of fold axes at larger fault displacement.Folding affects an area which tends to quickly stabilize in width, since folding weakens the sheared cover and subsequent deformation is concentrated in it. Axial surfaces of folds are initially upright, then tend to become inclined with an external vergence, forming a fan centered on the basement wrench fault. Deeper layer-deformation, close to the basement, involves fold reorientations that are greater than in the upper layers. Therefore, down a given vertical line, there is no continuity between surface and deep structures. The geometry and orientation of folds appearing at later stages of wrenching is controlled by the geometry and orientation of already extant folds.     

构造置换及其控矿规律——以吉林板石沟铁矿为例

强烈的塑性变形使华北地台东北部太古宙鞍山群中的吉林板石沟铁矿发生强烈的构造置换;造成原始仅有二三层的铁矿褶皱重复,在X(包络线)、Y(枢纽线)方向均被拉断,形成透镜状的复式褶皱勾状体。现有的19个矿组均为这种复式褶皱的转折端,并多呈"Z"型不对称形式。根据以上控矿规律本文提出两个找矿方向,一是包络线方向,另一是枢纽线方向,对1、3矿组具体地做了勘探设计。目前本文的勘探设计已得到勘探验证,新增铁矿储量数千万吨。     

Structural studies in the Pre-Vindhyan rocks of Rajasthan: A summary of work of the last three decades

Multiple deformation in all the Precambrian metamorphic-migmatitic rocks has been reported from Rajasthan during the last three decades. But, whereas the Aravalli Group and the Banded Gneissic Complex show similarity in the style and sequence of structures in all their details, the rocks of the Delhi Group trace a partly independent trend. Isoclinal folds of the first generation (AF₁) in the rocks of the Aravalli Group had gentle westerly plunge prior to later deformations. These folds show reclined, inclined, and upright attitude as a result of coaxial upright folding (AF_la). Superposition of upright folds (AF₂) of varying tightness, with axial plane striking N to NNE, has resulted in interference patterns of diverse types in the scale of maps, and deformation of earlier planar and linear structures in the scale of hand specimens. The structures of the third generation (AF₃) are either open recumbent folds or reclined conjugate folds with axial planes dipping gently towards NE or SW. Structures of the last phase are upright conjugate folds (AF₄) with axial planes striking NNE-SSW and E-W. The Banded Gneissic Complex (BGC) underlies the Aravalli Group with a conglomerate horizon at the contact, especially in southern Rajasthan. But, for a major part of central and southern Rajasthan, migmatites representing BGC show a structural style and sequence identical with those in the Aravalli Group. Migmatization, broadly synkinematic with the AF₁ folding, suggests extensive remobilization of the basement. Very rare relict fabric athwart to and overprinted by structures of AF, generation provide tangible evidence for a basement. Although the structures of later phases in the rocks of the Delhi Group (DF₃ and DF₄) match with the late-phase structures in the Aravalli Group (AF₃ and AF₄), there is a contrast in the structural history of the early stages in the rocks of the two groups. The folds of the first generation in the Delhi Group (DF₁) were recumbent to reclined with gentle plunge towards N to NNE or S to SSW. These were followed by coaxial upright folds of varying tightness (DF₂). Absence of westerly trending AF₁ folds in the Delhi Group, and extreme variation in plunge of the AF₂ folds in contrast with the fairly constant plunge of the DF₂ folds, provide evidence for an angular unconformity between the Aravalli and the Delhi Groups. Depending on the importance of flattening attendant with and following buckling during AF₂ deformation, the lineations of AF₁ generation show different patterns. Where the AF₁ lineations are distributed in circular cones around AF₂ axes because of flexural-slip folding in layered rocks with high viscosity contrast, loci of early lineations indicate that the initial orientation of the AF₁ axes were subhorizontal, trending towards N280°. The orientation of the axial planes of the earlier folds has controlled the development of the later folds. In sectors where the AF, axial planes had N-S strike and gentle dips, or E-W strike with gentle to steep dips, nearly E-W horizontal compression during AF₂ deformation resulted in well-developed AF₂ folds. By contrast, where the AF, axial planes were striking nearly N-S with steep dips, E-W horizontal compression resulted in tightening (flattening) of the already isoclinal AF₁ folds, and probably boudinage structures in some instances, without the development of any AF₂ folds. A similar situation obtains when DF₄ deformation is superposed on earlier structures. Where the dominant S-planes were subhorizontal, N-S compression during DF₄ deformation resulted in either chevron folds with E-W striking axial plane or conjugate folds with axial plane striking NE and NW. In zones with S-planes striking E-W and dipping steeply, the N-S compression resulted in flattening of the earlier folds without development of DF₄ folds.     

Fold propagation in single embedded layers

This paper investigates the folding of single competent layers embedded in a less competent matrix, where the competence contrast is about 10: 1. Folds result from buckling during layer-parallel compression. A geometrical study of natural examples shows that individual folds tend to be grouped into fold complexes.The amplitude varies from a maximum at the centre of a complex to a minimum at each end. Each complex is often centred about a sedimentary lens or nodule which may have triggered the folding and localized the complex. The formation of folds of this kind has been simulated experimentally by deformation of models made from paraffin waxes of known rheological properties. Early in the deformation of a model, buckling starts at a localized site of disturbance, producing only one fold. With further deformation, new folds appear at either side of the initial one. The buckling then propagates along the layering, further folds appearing serially in time and distance. The end result is a complex with many individual folds and a regularly periodic shape.With a competence contrast of 10: 1, the rate of fold propagation is slow, and formation of a periodic complex requires an overall shortening of at least 15%. The shapes of folds formed experimentally are similar to those formed naturally.     

A Structural Interpretation Model and Restoration of the Mesozoic Proto-basin for the Kuqa Depression, Tarim Basin

A thrust-fold belt consisting of a series of thrusts and buckling folds developed in the Mesozoic and Cenozoic strata within the Kuqa Depression, Tarim Basin. In this study, a structural interpretation model of the Kuqa Depression is established and the Mesozoic proto-basin is reconstructed on the basis of outcrop geology along the basin margin, seismic,well-log and CEMP data. The model is called ‘delaminate contractional deformation’, which emphasizes the decoupling between the Cenozoic, Mesozo...     

湖南白马山复式花岗岩基年代学及对区域构造变形时间的约束

雪峰山东麓新元古界-中生界发育有南北向、近东西向、北东-北北东向三组褶皱,它们是华南古生代以来多期构造变形的产物,其形成时代是讨论江南古陆属性的重要依据。白马山复式花岗岩基侵入到这几组褶皱之中,成为限定这三期褶皱时代的重要地质体。岩基中最老的水车超单元花岗岩至少在411 Ma就已侵位并至少延续到381 Ma。该期岩浆侵入到南北向褶皱核部,结合卷入褶皱的最新地层,确定南北向褶皱形成于中志留-晚志留世。北东-北北东向褶皱为晚三叠世岩浆直接侵入,其形成至少在200 Ma之前,结合前人资料,北东-北北东向褶皱形成于晚三叠世。近东西向褶皱被北东-北北东向褶皱和断裂叠加或切割,卷入褶皱的最新地层为下三叠统,该方向褶皱形成时代为中三叠世。近南北向褶皱代表了早古生代末的广西运动,近东西向和北东-北北东向褶皱均形成于印支运动,是扬子地块与华夏地块在三叠纪顺时针旋转过程中不同阶段相互作用的结果。华南内陆的变形受控于板块边缘构造作用影响。     

A thin-skinned thrust model for Variscan Pembrokeshire, Wales

The east and west coasts of Pembrokeshire (SW Wales) provide two sections through the Variscan fold and thrust belt. The evolution of these structures is interpreted in terms of a thin-skinned tectonic model. Balanced cross-sections are constructed for the high-level imbricate sequences, and these allow reasonably accurate estimates of shortening to be made. Basement control on structures developed in the Upper Carboniferous cover rocks is minimal, though some thrust ramp positions may be determined by the location of earlier normal faults.The thrust belt may be divided into two parts, according to the depth to the décollement horizon. In the north, imbricate fans developed from a shallow-level detachment (<1 km) which dips gently south. In the southern part, a deeper level of décollement and thicker sedimentary pile gave rise to large-amplitude folds.Shortening is heterogeneous, and both thrust periodicity and fold style are partly determined by rheology. Cumulative tectonic displacement increases to the west across Pembrokeshire, resulting in a net clockwise rotation of about 40°.