岩浆补给作用对硅质火山岩浆系统演化的制约

硅质火山喷发作为大陆地壳岩浆活动的重要表现，在研究大陆地壳形成与演化、探讨岩浆过程与动力学机制等方面具有重要的价值，其通常所表现的强烈爆炸式喷发，甚至可以导致全球性的环境和气候变迁。硅质岩浆系统在开放体系中不同来源岩浆的贡献和相互作用是目前研究的热点问题。持续的岩浆补给可以延长岩浆存储的时间，促进岩浆房的对流、岩浆的分异演化以及晶体 熔体的分离和晶粥的再活化，同时也是触发火山喷发的重要机制之一。此外，岩浆补给以及硅质岩浆的晶体 熔体演化过程也是火山喷发产物多样性的原因，导致同一火山在其活动过程中喷发产物规律性的变化，如富晶体火山岩、贫晶体火山岩、火山岩成分分层、以及复活岩穹和中央侵入体等。因此，岩浆补给作用是制约硅质火山岩浆系统演化和火山岩成分多样性的重要因素，也是活动火山监测和灾害评估的重要依据。岩石学、岩石地球化学、矿物(长石、石英、石榴子石、锆石等)同位素及成分变化，以及模拟实验、地震层析成像等研究为揭示硅质岩浆系统中的岩浆补给作用和复杂岩浆过程提供了多种视角。     

锆石微量元素地球化学对硅质火山岩浆系统的制约

大型硅质火山作用(喷发体积约102～104 km3)的岩浆系统是地壳尺度的,经历了复杂的起源、运移、存储、补给和喷发等过程.揭示岩浆从起源到喷发过程中的结晶分异、堆晶、晶体-熔体分离、地壳混染、岩浆补给、晶粥活化等岩浆作用的细节是认识硅质火山岩浆系统演化的关键.锆石中Th、U、Ti、Hf和REE等微量元素的含量和系统变...     

Insights from quartz cathodoluminescence zoning into crystallization of the Vinalhaven granite,coastal Maine

The Vinalhaven intrusive complex provides field and petrographic evidence for multiple replenishments of mafic and silicic magmas, mingling and limited mixing, and rejuvenation of granite. Quartz in granitic rocks preserves a record of those processes, in the form of cathodoluminescence (CL) zoning, which is related to concentration of titanium, and to temperature of crystallization using the new TitaniQ (Ti in quartz) geothermometer. Injection of mafic melts into partly crystalline Vinalhaven granite resulted in partial quartz resorption followed by higher-temperature growth from H₂O-undersaturated melt. This is shown by steep, rimward increases in CL intensity and Ti content across discordant boundaries that truncate older growth zones. Quartz zoning in granite affected by mafic magmas displays large rimward jumps in Ti content, whereas quartz in granitic feeders and in granite far from mafic rocks typically displays broad rims with decreasing Ti contents, consistent with slow cooling without thermal disruptions due to mafic recharge.     

石英阴极发光在火成岩研究中的应用

阴极发光是一种研究火成岩石英显微生长结构的有效技术方法。文章以甲玛斑岩铜矿床中岩体样品分析为例,简要介绍了光学显微镜阴极发光(OM-CL)和扫描电镜阴极发光(SEM-CL)两种图片的特点,并综述了石英阴极发光在火成岩研究中的应用。阴极发光所显示出的火成岩石英中的生长形式和蚀变结构反映了岩浆的结晶历史。相对稳定的以蓝色阴极发光为主的斑晶区域主要与石英中Ti含量的变化有关,它反映了结晶作用的温度。由于在岩浆演化过程中,与铝、锂、钾、锗、硼、铁、磷相比,钛更加相容,因此随着岩浆分异程度的加深,火成岩中铝/钛逐渐升高。石英阴极发光不仅能显示岩浆早期及岩浆晚期的各种结构,如生长环带、重熔表面、溶蚀湾等,还反映了许多次生结构,如显微裂隙等。这些现象在光学显微镜下难以观察区分。晶体的显微结构提供了熔体来源和演化的重要信息。将石英结构和熔融包裹体与微量元素研究相结合反映了岩浆演化详细的PTt轨迹,它是富硅酸盐岩浆演化过程中物理-化学条件改变的敏感指示剂。     

Compositional Zoning of the Bishop Tuff

Compositional data for >400 pumice clasts, organized accordingto eruptive sequence, crystal content, and texture, providenew perspectives on eruption and pre-eruptive evolution of the>600 km³ of zoned rhyolitic magma ejected as the Bishop Tuffduring formation of Long Valley caldera. Proportions and compositionsof different pumice types are given for each ignimbrite packageand for the intercalated plinian pumice-fall layers that eruptedsynchronously. Although withdrawal of the zoned magma was lesssystematic than previously realized, the overall sequence displaystrends toward greater proportions of less evolved pumice, morecrystals (0·5–24 wt %), and higher FeTi-oxide temperatures(714–818°C). No significant hiatus took place duringthe 6 day eruption of the Bishop Tuff, nearly all of which issuedfrom an integrated, zoned, unitary reservoir. Shortly beforeeruption, however, the zoned melt-dominant portion of the chamberwas invaded by batches of disparate lower-silica rhyolite magma,poorer in crystals than most of the resident magma but slightlyhotter and richer in Ba, Sr, and Ti. Interaction with residentmagma at the deepest levels tapped promoted growth of Ti-richrims on quartz, Ba-rich rims on sanidine, and entrapment ofnear-rim melt inclusions relatively enriched in Ba and CO₂.Varied amounts of mingling, even in higher parts of the chamber,led to the dark gray and swirly crystal-poor pumices sparselypresent in all ash-flow packages. As shown by FeTi-oxide geothermometry,the zoned rhyolitic chamber was hottest where crystal-richest,rendering any model of solidification fronts at the walls orroof unlikely. The main compositional gradient (75–195ppm Rb; 0·8–2·2 ppm Ta; 71–154 ppmZr; 0·40–1·73% FeO*) existed in the melt,prior to crystallization of the phenocryst suite observed, whichincluded zircon as much as 100 kyr older than the eruption.The compositions of crystals, though themselves largely unzoned,generally reflect magma temperature and the bulk compositionalgradient, implying both that few crystals settled or were transportedfar and that the observed crystals contributed little to establishingthat gradient. Upward increases in aqueous gas and dissolvedwater, combined with the adiabatic gradient (for the 5 km depthrange tapped) and the roofward decline in liquidus temperatureof the zoned melt, prevented significant crystallization againstthe roof, consistent with dominance of crystal-poor magma earlyin the eruption and lack of any roof-rind fragments among theBishop ejecta, before or after onset of caldera collapse. Amodel of secular incremental zoning is advanced wherein numerousbatches of crystal-poor melt were released from a mush zone(many kilometers thick) that floored the accumulating rhyoliticmelt-rich body. Each batch rose to its own appropriate levelin the melt-buoyancy gradient, which was self-sustaining againstwholesale convective re-homogenization, while the thick mushzone below buffered it against disruption by the deeper (non-rhyolitic)recharge that augmented the mush zone and thermally sustainedthe whole magma chamber. Crystal–melt fractionation wasthe dominant zoning process, but it took place not principallyin the shallow melt-rich body but mostly in the pluton-scalemush zone before and during batchwise melt extraction. KEY WORDS: Bishop Tuff; ignimbrite; magma zonation; mush model; rhyolite     

Multiple timescale constraints for high-flux magma chamber assembly prior to the Late Bronze Age eruption of Santorini (Greece)

The rhyodacitic magma discharged during the 30–80 km³ DRE (dense rock equivalent) Late Bronze Age (LBA; also called ‘Minoan’) eruption of Santorini caldera is known from previous studies to have had a complex history of polybaric ascent and storage prior to eruption. We refine the timescales of these processes by modelling Mg–Fe diffusion profiles in orthopyroxene and clinopyroxene crystals. The data are integrated with previously published information on the LBA eruption (phase equilibria studies, melt inclusion volatile barometry, Mg-in-plagioclase diffusion chronometry), as well as new plagioclase crystal size distributions and the established pre-LBA history of the volcano, to reconstruct the events that led up to the assembly and discharge of the LBA magma chamber. Orthopyroxene, clinopyroxene and plagioclase crystals in the rhyodacite have compositionally distinct rims, overgrowing relict, probably source-derived, more magnesian (or calcic) cores, and record one or more crystallization (plag???opx?>?cpx) events during the few centuries to years prior to eruption. The crystallization event(s) can be explained by the rapid transfer of rhyodacitic melt from a dioritic/gabbroic region of the subcaldera pluton (mostly in the 8–12 km depth range), followed by injection, cooling and mixing in a large melt lens at 4–6 km depth (the pre-eruptive magma chamber). Since crystals from all eruptive phases yield similar timescales, the melt transfer event(s), the last of which took place less than 2 years before the eruption, must have involved most of the magma that subsequently erupted. The data are consistent with a model in which prolonged generation, storage and segregation of silicic melts were followed by gravitational instability in the subcaldera pluton, causing the rapid interconnection and amalgamation of melt-rich domains. The melts then drained to the top of the pluton, at fluxes of up to 0.1–1 km³ year^??1, where steep vertical gradients of density and rheology probably caused them to inject laterally, forming a short-lived holding chamber prior to eruption. This interpretation is consistent with growing evidence that some large silicic magma chambers are transient features on geological timescales. A similar process preceded at least one earlier caldera-forming eruption on Santorini, suggesting that it may be a general feature of this rift-hosted magmatic system.     

Silicic recharge of multiple rhyolite magmas by basaltic intrusion during the 22.6 ka Okareka Eruption Episode, New Zealand

Deposits of the 22.6 ka Okareka Eruption Episode from Tarawera Volcanic Complex record the sequential and simultaneous eruption of three discrete rhyolite magmas following a silicic recharge event related to basaltic intrusion. The episode started with basaltic eruption ( 0.01 km³ magma), and rapidly changed to a plinian eruption involving a moderate temperature (750 °C), cummingtonite-bearing rhyolite magma (T1) with a volume of  0.3 km³. Hybrid basalt/rhyolite clasts demonstrate direct basaltic intrusion that helped trigger the eruption. Crystals, shards and lapilli of two other rhyolite magmas then joined the eruption sequence. They comprise a cooler (720 °C) crystal-rich biotite–hornblende rhyolite magma (T2) ( 0.3 km³), and a hotter (780 °C), crystal-poor, pyroxene–hornblende rhyolite magma (T3) ( 4.5 km³). All mid to late-stage ash units contain various mixtures of T1, T2 and T3 components with a general increase in abundance of T3 and rapid decline of T1 with time. About 4 km³ of T3 magma was extruded as lavas at the end of the episode. Contrasts in melt composition, crystal and volatile contents, and temperatures influenced viscosity and miscibility, and thus limited pre-eruption mixing of the rhyolite magmas. The eruption sequence and the restricted direct basaltic intrusion into only one magma (T1) is consistent with the rhyolites occupying separate melt pods within a large crystal-mush zone. Melt–crystal equilibria and volatile contents in melt inclusions indicate temporary magma storage depths of < 8 km. Each of the magmas display quartz crystals containing melt inclusions that are compositionally highly evolved relative to the accompanying matrix glass, and thus point to a stage of more complete crystallisation. The matrix glass, enriched in Sr and Ti, represents a re-melting event of underlying the crystal pile induced by basaltic intrusion, presumably part of the same event that erupted scoria at the start of the eruption. This recharge rhyolite melt percolated upward and hybridised with the resident melts in each of the three magma pods. The Okareka episode rhyolites contrast with other well-documented rhyolites that are either continuously or discontinuously zoned, or have been homogenised during re-activation to a uniform composition. Rapid basalt dike intrusion to shallow levels appears to have (prematurely?) triggered the Okareka rhyolites into eruption, so that their early ponding in separate melt pods has been recorded before it could be masked by mixing or stratification had amalgamation into a larger body occurred.     

Millennial timescale resolution of rhyolite magma recharge at Tarawera volcano: insights from quartz chemistry and melt inclusions

Most rhyolite eruption episodes of Tarawera volcano have emitted several physiochemically distinct magma batches (∼1–10 km³). These episodes were separated on a millennial timescale. The magma batches were relatively homogeneous in temperature and composition at pumice scale (>4 cm), but experienced isolated crystallisation histories. At the sub-cm scale, matrix glasses have trace element compositions (Sr, Ba, Rb) that vary by factors up to 2.5, indicating incomplete mixing of separate melts. Some quartz-hosted melt inclusions are depleted in compatible trace elements (Sr, Ti, Ba) compared to enclosing matrix glasses. This could reflect re-melting of felsic crystals deeper in the crystal pile. Individual quartz crystals display a variety of cathodoluminescence brightness and Ti zoning patterns including rapid changes in melt chemistry and/or temperature (∼50–100°C), and point to multi-cycle crystallisation histories. The Tarawera magma system consisted of a crystal-rich mass containing waxing and waning melt pockets that were periodically recharged by silicic melts driven by basaltic intrusion. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Quantitative field constraints on the dynamics of silicic magma chamber rejuvenation and overturn

The catastrophic eruption of large-volume, crystal-rich silicic magmas is often proposed to be a consequence of reheating, melting and overturn of partially molten, buoyant silicic material following repeated injection of dense, hot mafic magma. To test this “rejuvenation hypothesis”, we analyze at high spatial resolution 33 examples of deformed interfaces between intrusive mafic and silicic layers in two plutons of the Coastal Maine Magmatic Province, USA. These deformed interfaces are thought to record the buoyant overturn of silicic crystal mush layers, apparently in response to the injection and cooling of hot, dense mafic magmas. We use spectral analysis and scaling theory along with petrologic and textural data to identify, characterize, and understand periodic deformations from the scale of individual crystals (≈1 cm) to the thicknesses of mafic and silicic layers. Deformations at the largest scale lengths (>100 m) are at wavelengths comparable to, or greater than, silicic layer thicknesses and support a conjecture that mafic recharge can cause large-scale Rayleigh–Taylor-type overturning of silicic mushy layers. By contrast, the smallest scales of individual crystals probably record effects related to production and buoyancy-driven rise of melt from the tops of silicic mushes in contact with overlying hot basalt, whereas intermediate scales are explained by compaction. Our results constrain the evolution of a thermal rejuvenation event and potentially identify a condition for a large-scale overturn of the magma chamber that may lead to eruption. This work provides the first quantitative field-based constraints on some of the key physical processes inherent to the rejuvenation hypothesis.     

Sixty thousand years of magmatic volatile history before the caldera-forming eruption of Mount Mazama, Crater Lake, Oregon

The well-documented eruptive history of Mount Mazama, Oregon, provides an excellent opportunity to use pre-eruptive volatile concentrations to study the growth of an explosive silicic magmatic system. Melt inclusions (MI) hosted in pyroxene and plagioclase crystals from eight dacitic–rhyodacitic eruptive deposits (71–7.7?ka) were analyzed to determine variations in volatile-element concentrations and changes in magma storage conditions leading up to and including the climactic eruption of Crater Lake caldera. Temperatures (Fe–Ti oxides) increased through the series of dacites, then decreased, and increased again through the rhyodacites (918–968 to ~950 to 845–895?°C). Oxygen fugacity began at nickel–nickel-oxide buffer (NNO) +0.8 (71?ka), dropped slightly to NNO +0.3, and then climbed to its highest value with the climactic eruption (7.7?ka) at NNO +1.1 log units. In parallel with oxidation state, maximum MI sulfur concentrations were high early in the eruptive sequence (~500?ppm), decreased (to ~200?ppm), and then increased again with the climactic eruption (~500?ppm). Maximum MI sulfur correlates with the Sr content (as a proxy for LREE, Ba, Rb, P₂O₅) of recharge magmas, represented by basaltic andesitic to andesitic enclaves and similar-aged lavas. These results suggest that oxidized Sr-rich recharge magmas dominated early and late in the development of the pre-climactic dacite–rhyodacite system. Dissolved H₂O concentrations in MI do not, however, correlate with these changes in dominant recharge magma, instead recording vapor solubility relations in the developing shallow magma storage and conduit region. Dissolved H₂O concentrations form two populations through time: the first at 3–4.6 wt% (with a few extreme values up to 6.1 wt%) and the second at ≤2.4 wt%. CO₂ concentrations measured in a subset of these inclusions reach up to 240?ppm in early-erupted deposits (71?ka) and are below detection in climactic deposits (7.7?ka). Combined H₂O and CO₂ concentrations and solubility models indicate a dominant storage region at 4–7?km (up to 12?km), with drier inclusions that diffusively re-equilibrated and/or were trapped at shallower depths. Boron and Cl (except in the climactic deposit) largely remained in the melt, suggesting vapor–melt partition coefficients and gas fractions were low. Modeled Li, F, and S vapor–melt partition coefficients are higher than those of B and Cl. The decrease in maximum MI CO₂ concentration following the earliest dacitic eruptions is interpreted to result from a broadening of the shallow storage region to greater than the diameter of subjacent feeders, so that greater proportions of reservoir magma were to the side of CO₂-bearing vapor bubbles ascending vertically from the locus of recharge magma injection, thereby escaping recarbonation by streaming vapor bubbles. The Mazama melt inclusions provide a picture of a growing magma storage region, where chemical variations in melt and magma occur due to changes in the nature and supply rate of magma recharge, the timing of degassing, and the possible degree of equilibration with gases from below.     

Zircon trace element chemistry at sub-micrometer resolution for Tarawera volcano,New Zealand,and implications for rhyolite magma evolution

Zoned crystals can be important recorders of magmatic processes in space and time. However, in most situations, the temporal dimension is difficult to quantify. Here, we have employed secondary ion mass spectrometry depth profiling to excavate parallel pits into non-polished crystal faces of zircon to obtain ~5 μm resolution U–Th disequilibrium ages (one pit) that can be correlated with trace element zoning at sub-μm resolution derived from a second pit. Data from 17 crystals representing each of the four rhyolite eruptions of Tarawera volcano, an intra-caldera edifice within the Okataina Volcanic Centre, reveal diverse zircon growth conditions over time. Most crystals display rimward depletions in Zr/Hf and Ti, broadly consistent with cooling and crystallization. However, a significant fraction of crystals lacks these patterns and displays rimward trace element variations consistent with isothermal or prograde crystallization. Oscillatory zonation patterns in Y, Th, and U are superimposed on the Zr/Hf and Ti trends. Despite the limited number of crystals analyzed in this way, the striking lack of ubiquitous trace element zoning patterns in crystals from the same hand sample implies that fractional crystallization upon cooling was punctuated by magma recharge and crystal mixing affecting different parts of the magma reservoir. By combining data from all crystals, a systematic change to more heterogeneous trace element abundances is revealed by zircon crystal domains <45 ka following the Rotoiti caldera-forming eruption. This contrasts with the more uniform conditions of zircon crystallization lasting >100 ka prior to caldera formation and is best explained by the post-caldera system consisting of small, isolated melt pockets that evolved independently. An important conclusion is that the zircon ‘cargo’ in volcanic rocks reflects thermally and compositionally divergent processes that act near simultaneously in a magma storage region and not exclusively the conditions in the eruptible magma.     

Minor- and trace-element zoning in plagioclase: implications for magma chamber processes at Parinacota volcano, northern Chile

Textural and compositional zoning in plagioclase phenocrysts in a sample from Parinacota volcano (Chile) was investigated using backscattered electron images and electron microprobe analysis of major and trace elements. Large (2 mm) oscillatory zoned crystals (type I) with resorption surfaces of moderate An discontinuities (Ⲓ% An) and decreasing trace-element contents (Sr, Mg, Ti) towards the rim reflect melt differentiation and turbulent convection in the main magma body. Early recharge with a low-Sr mafic magma is seen in the core. Small-scale Sr variations in the core indicate limited diffusion and thus residence and differentiation times of the magma shorter than a few thousand years. Smaller crystals (type II) with low trace-element/An ratio reflect the influence of an H₂O-rich melt probably from a differentiated boundary layer. Closed-system in-situ crystallisation, mafic magma recharge and the role of a water-rich differentiated boundary layer can be distinguished from the An-trace element relationships. Crystals apparently move relatively freely between different parts and regimes in the magma chamber, evidence for "convective crystal dispersion". High-Sr type II crystals indicate an earlier input of Sr-rich mafic magma. Recharge of two distinct mafic magma types is thus identified (high-Sr and low-Sr), which must have been present - at increasing recharge rates with time - in the plumbing system throughout the volcano's history.     

加勒比海小安德列斯岛弧Kick’emJenny海底火山岩的斜长石成分环带:示踪大洋岛弧岩浆房的演化

我们对采自于加勒比海地区小安德列斯岛弧(Lesser Antilles Arc)Kick’em Jenny(KEJ)海底火山玄武岩中的斜长石斑晶进行了矿物形态和成分分析。利用电子探针(EMPA)和LA-ICP-MS测定了具有环带结构的斜长石斑晶中主量元素的空间分布,同时也利用LA-ICP-MS分析了斜长石中Sr的分布。结果表明,在不同的矿物斑晶中,元素含量均表现出和环带结构相联系的空间分布变化。斜长石斑晶中最主要的结构为韵律环带以及熔蚀结构,所测定的矿物边缘都存在An值从由内向外迅速降低的致密韵律环带,可能反映了快速结晶时的不平衡;而晶体内部的稀疏韵律环带结构是由岩浆填充或对流活动导致的。部分斜长石的熔蚀层An值由内向外升高,反映了高Ca岩浆填充的过程。这说明斜长石斑晶的矿物形态和元素环带可以用来制约俯冲带海底火山岩浆从源区上升到岩浆房再到喷发的复杂过程,包括岩浆演化、熔体多次填充、熔体与结晶矿物之间的反应、以及矿物再熔融等。这对于理解海底火山的喷发以及岛弧岩浆岩的演化有重要意义。     

Insights into silicic melt generation using plagioclase, quartz and melt inclusions from the caldera-forming Rotoiti eruption, Taupo volcanic zone, New Zealand

The Rotoiti (~120 km³) and Earthquake Flat (~10 km³) eruptions occurred in close succession from the Okataina Volcanic Centre at ~50 ka. While accessory mineral geochronology points to long periods of crystallization prior to eruption (10⁴–10⁵ years) and separate thermal histories for the magmas, little was known about the rates and processes of the final melt production and eruption. Crystal zoning patterns in plagioclase and quartz reveal the thermal and compositional history of the magmatic system leading up to the eruption. The dominant modal phase, plagioclase, displays considerable within-crystal zonation: An_37–74, ~40–227 ppm MgO, 45–227 ppm TiO₂, 416–910 ppm Sr and 168–1164 ppm Ba. Resorption horizons in the crystals are marked by sharp increases (10–30%) in Sr, MgO and X_An that reflect changes in melt composition and are consistent with open system processes. Melt inclusions display further evidence for open system behaviour, some are depleted in Sr and Ba relative to accompanying matrix glass not consistent with crystallization of modal assemblage. MI also display a wide range in XH₂O that is consistent with volatile fluxing. Quartz CL images reveal zoning that is truncated by resorption, and accompanied by abrupt increases in Ti concentration (30–80 ppm) that reflect temperature increases ~50–110°C. Diffusion across these resorption horizons is restricted to zones of <20 μm, suggesting most crystallization within the magma occurred in <2000 years. These episodes are brief compared to the longevity (10⁴–10⁵ year) of the crystal mush zones. All textural and compositional features observed within the quartz and plagioclase crystals are best explained by periodic mafic intrusions repeatedly melting parts of a crystal-rich zone and recharging the system with silicic melt. These periodic influxes of silicic melt would have accumulated to form the large volume of magma that fed the caldera-forming Rotoiti eruption.     

Quartz and feldspar zoning in the eastern Erzgebirge volcano-plutonic complex (Germany, Czech Republic): evidence of multiple magma mixing

Zoned quartz and feldspar phenocrysts of the Upper Carboniferous eastern Erzgebirge volcano-plutonic complex were studied by cathodoluminescence and minor and trace element profiling. The results verify the suitability of quartz and feldspar phenocrysts as recorders of differentiation trends, magma mixing and recharge events, and suggest that much heterogeneity in plutonic systems may be overlooked on a whole-rock scale. Multiple resorption surfaces and zones, element concentration steps in zoned quartz (Ti) and feldspar phenocrysts (anorthite content, Ba, Sr), and plagioclase-mantled K-feldspars etc. indicate mixing of silicic magma with a more mafic magma for several magmatic phases of the eastern Erzgebirge volcano-plutonic complex. Generally, feldspar appears to be sensitive to the physicochemical changes of the melt, whereas quartz phenocrysts are more stable and can survive a longer period of evolution and final effusion of silicic magmas. The regional distribution of mixing-compatible textures suggests that magma mingling and mixing was a major process in the evolution of these late-Variscan granites and associated volcanic rocks.

Quartz phenocrysts from 14 magmatic phases of the eastern Erzgebirge volcano-plutonic complex provide information on the relative timing of different mixing processes, storage and recharge, allowing a model for the distribution of magma reservoirs in space and time. At least two levels of magma storage are envisioned: deep reservoirs between 24 and 17 km (the crystallisation level of quartz phenocrysts) and subvolcanic reservoirs between 13 and 6 km. Deflation of the shallow reservoirs during the extrusion of the Teplice rhyolites triggered the formation of the Altenberg-Teplice caldera above the eastern Erzgebirge volcano-plutonic complex. The deep magma reservoir of the Teplice rhyolite also has a genetic relationship to the younger mineralised A-type granites, as indicated by quartz phenocryst populations. The pre-caldera biotite granites and the rhyodacitic Schönfeld volcanic rocks represent temporally and spatially separate magma sources. However, the deep magma reservoir of both is assumed to have been at a depth of 24–17 km. The drastic chemical contrast between the pre-caldera Schönfeld (Westfalian B–C) and the syn-caldera Teplice (Westfalian C–D) volcanic rocks is related to the change from late-orogenic geotectonic environment to post-orogenic faulting, and is considered an important chronostratigraphic marker.     

Diversity of primary CL textures in quartz from porphyry environments: implication for origin of quartz eyes

Porphyry-style mineralization is related to the intrusion and crystallization of small stocks, which can be of different compositions (from intermediate to felsic) and can intrude into different host rocks (from magmatic to sedimentary). We used cathodoluminescence and electron probe microanalysis to study the internal textures of more than 300 quartz eyes from six porphyry deposits, Panguna (Papua New Guinea), Far Southeast porphyry (Philippines), Batu Hijau (Indonesia), Antapaccay (Peru), Rio Blanco (Chile) and Climax (USA). Significant diversity of the internal textures in quartz eyes was revealed, sometimes even within a single sample. Quartz grains with Ti-rich cores surrounded by Ti-poor mantles were found next to the grains showing the opposite Ti distribution or only slight Ti fluctuations.We propose that diversity of the internal patterns in quartz eyes can actually reflect in situ crystallization history, and that prolonged crystallization after magma emplacement under conditions of continuous cooling can account for the observed features of internal textures. Formation of quartz eyes begins at high temperatures with crystallization of high titanium Quartz 1, which as the melt becomes more and more evolved and cooler, is overgrown by low Ti Quartz 2. Subsequent fluid exsolution brings about dramatic change in the melt composition: OH ^? , alkalis and other Cl-complexed elements partition into the fluid phase, whereas Ti stays in the melt, contributing to a rapid increase in Ti activity. Separation of the fluid and its further cooling causes disequilibrium in the system, and the Quartz 2 becomes partially resorbed. Exsolution of the fluid gradually builds up the pressure until it exceeds the yield strength of the host rocks and they then fracture. This pressure release most likely triggers crystallization of Quartz 3, which is higher in Ti than Quartz 2 because Ti activity in the melt is higher and pressure of crystallization is lower. As a result of the reaction between the exsolved fluid and quartz a new phase, a so called ‘heavy fluid’ forms. From this phase Quartz 4 crystallizes. This phase has extremely high metal-carrying capacity, and may give a rise to mineralizing fluids. Finally, on the brink of the subsolidus stage, groundmass quartz crystallizes. Prolonged crystallization under conditions of continuous cooling accounts better for the diversity of CL textures than crystallization in different parts of a deep magma chamber. It is also in a better agreement with the existing model for formation of porphyry-style deposits.     

Timescales of mixing and mobilisation in the Bishop Tuff magma body: perspectives from diffusion chronometry

We present two-feldspar thermometry and diffusion chronometry from sanidine, orthopyroxene and quartz from multiple samples of the Bishop Tuff, California, to constrain the temperature stratification within the pre-eruptive magma body and the timescales of magma mixing prior to its evacuation. Two-feldspar thermometry yields estimates that agree well with previous Fe–Ti oxide thermometry and gives a ~80 °C temperature difference between the earlier- and later-erupted regions of the magma chamber. Using the thermometry results, we model diffusion of Ti in quartz, and Ba and Sr in sanidine as well as Fe–Mg interdiffusion in orthopyroxene to yield timescales for the formation of overgrowth rims on these crystal phases. Diffusion profiles of Ti in quartz and Fe–Mg in orthopyroxene both yield timescales of <150 years for the formation of overgrowth rims. In contrast, both Ba and Sr diffusion in sanidine yield nominal timescales 1–2 orders of magnitude longer than these two methods. The main cause for this discrepancy is inferred to be an incorrect assumption for the initial profile shape for Ba and Sr diffusion modelling (i.e. growth zoning exists). Utilising the divergent diffusion behaviour of Ba and Sr, we place constraints on the initial width of the interface and can refine our initial conditions considerably, bringing Ba and Sr data into alignment, and yielding timescales closer to 500 years, the majority of which are then within uncertainty of timescales modelled from Ti diffusion in quartz. Care must be thus taken when using Ba in sanidine geospeedometry in evolved magmatic systems where no other phases or elements are available for comparative diffusion profiling. Our diffusion modelling reveals piecemeal rejuvenation of the lower parts of the Bishop Tuff magma chamber at least 500 years prior to eruption. Timescales from our mineral profiling imply either that diffusion coefficients currently used are uncertain by 1–2 orders of magnitude, or that the minerals concerned did not experience a common history, despite being extracted from the same single pumice clasts. Introduction of the magma initiating crystallisation of the contrasting rims on sanidine, quartz, orthopyroxene and zircon was prolonged, and may be a marker of other processes that initiated the Bishop Tuff eruption rather than the trigger itself.     

Magmatic process recorded in plagioclase at the Baogutu reduced porphyry Cu deposit,western Junggar,NW-China

Despite the fact that porphyry Cu deposits contain large amounts of Cu in one or more small stocks, few studies have discussed evidence for significant magma recharge in porphyry Cu deposits. A systematic elemental and Sr isotopic study of plagioclase crystals from mineralized diorite and granodiorite porphyry constrains the processes of crystallization and magma recharge at the Baogutu reduced porphyry copper deposit, western Junggar, NW-China. Large compositional changes in An (12–24 mol%) are observed along with strong positive correlations between An and FeO. Significant resorption textures are also preserved in plagioclase crystals as well as repeated oscillatory zoning in An and FeO, and complex Sr isotope variations. Three types of crystals with different core-to-rim Sr isotope variations are recognized. Type I crystals have core-to-rim increases in (⁸⁷Sr/⁸⁶Sr)_i that could be explained by diffusion. For example, Sr isotope variations recorded in BCK2-1-2 crystal could be generated by diffusion with simulated maximum crystal residence times of 100–500 years with the proximate value of ∼300 years. Type II crystals with different variation trends in (⁸⁷Sr/⁸⁶Sr)_i on opposite sides of the core could be produced either by multi-stage crystallization or by analytical uncertainty. Whereas, type III crystals with complex core-to-rim variations in (⁸⁷Sr/⁸⁶Sr)_i, may record repeated magma recharge events. All these results suggest repeated recharging of the magma chamber by hotter, more mafic and less radiogenic Sr isotope melts. Therefore, more mafic melt injection recorded in plagioclase profiles may provide significant metal contributions to the magma chamber, which ultimately results in Cu mineralization at the Baogutu reduced porphyry copper deposit.     

岩浆作用过程的矿物记录:以邯邢地区中生代侵入岩为例

矿物环带结构是岩浆过程的良好记录,而矿物温压计可以定量计算岩浆的物理化学条件。该次研究对邯邢地区中生代侵入岩中两个浅成侵入体中典型的斜长石斑晶进行了电子探针和LA-ICP-MS元素面扫描,同时对其中不同成因的角闪石晶体进行了电子探针分析和物理化学条件计算。通过研究发现这两个样品中的斜长石斑晶属于循环晶。辉石闪长玢岩中的斜长石斑晶主要成分为更长石,而斑状石英二长岩中斜长石斑晶主要成分为中长石和拉长石。两者具有明显不同的环带结构,分别记录了不同的岩浆混合过程:前者记录了基性岩浆多次注入酸性岩浆房,并最终获得体积优势;后者记录了少量基性岩浆注入酸性岩浆房内,两者不断混合,形成均质化岩浆的过程。Fe元素从斜长石中心到边部有富集的趋势,表明岩浆最终向富铁的方向演化。角闪石温压计的计算结果表明,辉石闪长玢岩的岩浆房深度在5.5 km左右,温度大约为850 ℃,氧逸度大约为ΔNNO+1,熔体中的含水量大约为4.0%,其最终侵位于2.1 km的地壳深度。而斑状石英二长岩最终定位于2.0 km的地壳深度,角闪石结晶的平均温度为737 ℃,相对氧逸度为ΔNNO+1.2,熔体含水量为3.9%。     

Origin of quartz clusters in Vinalhaven granite and porphyry,coastal Maine

We use the crystallographic orientations of quartz crystals, as determined with EBSD, to provide new evidence for the formation of clustered quartz crystals during magma crystallization. Vinalhaven is dominated by granite, with minor porphyry that formed when granite remelted during input of coeval basalt. CL zoning suggests that most quartz clusters in granite and porphyry formed by synneusis, the “swimming together” of preformed crystals. In granite, most quartz pairs in clusters have random orientations—only about 10% have parallel or Esterel twin orientations. Porphyry has fewer quartz clusters, and all pairs have approximately parallel or Esterel twin orientations. CL zoning of quartz pairs in porphyry indicates that they attached prior to a major remelting event. Interpretation of the Vinalhaven quartz clusters leads us to propose that oriented synneusis occurs during crystal accumulation on a magma chamber floor. During hindered settling, some quartz crystals should have come into contact along their dipyramidal faces. Once in contact, continued settling and loss of interstitial melt may have rotated some quartz crystals such that lattices on their dipyramidal faces matched—producing parallel and Esterel twin orientations and creating strong bonds between pairs. Only a small proportion of pairs with matched dipyramidal faces formed in the granite and, during rejuvenation to produce porphyry, only these oriented pairs survived. Hence, the presence of oriented synneusis in a plutonic rock may demonstrate a history of crystal accumulation.