Gas systems in the Kuche Depression of the Tarim Basin: Source rock distributions, generation kinetics and gas accumulation history

Six petroleum source beds have been developed in the Kuche Depression (also known as “Kuqa Depression”) of the Tarim Basin, including three lacustrine source rocks (Middle and Upper Triassic Kelamayi and Huangshanjie formations, and Middle Jurassic Qiakemake Formation) and three coal measures (Upper Triassic Taliqike Formation, Lower Jurassic Yangxia Formation, and Middle Jurassic Kezilenuer Formation). While type I–II organic matter occurs in the Middle Jurassic Qiakemake Formation (J₂q), other source beds contain dominantly type III organic matter. Gas generation rates and stable carbon isotopic kinetics of methane generation from representative source rocks collected in the Kuche Depression were measured and calculated using an on-line dry and open pyrolysis system. Combined with hydrocarbon generation history modelling, the formation and evolution processes of the Jurassic–Triassic highly efficient gas kitchens were established. High sedimentation rate in the Neogene and the fast deposition of the Kuche Formation within the Pliocene (5 Ma) in particular have led to the rapid increase in Mesozoic source rock maturity, resulting in significant dry gas generation. The extremely high gas generation rates from source kitchens have apparently expedited the formation of highly efficient gas accumulations in the Kuche Depression. Because different Mesozoic source rocks occur in different structural belts, the presence of both lacustrine and coaly gas kitchens during the Cenozoic time can be identified in the Kuche Depression. As shown by the chemical and stable carbon isotope compositions of the discovered gases, the formation of the giant gas pools in the Kela 2, Dina 2, Yaha and Wucan 1 have involved very different geological processes due to the difference in their gas source kitchens.     

Response to Thrift's “The future of geography”

Reviews and observations about the status of the discipline of geography, no matter how positive, invariably raise programmatic concerns. These concerns have a long history that arise from geography's struggles to find an identity that embraces its many parts and yet are consistent with the logic by which the academy partitions knowledge. Pedagogy and research historically claimed by geography is currently being reinvented and relabeled under such headings as “integrated environmental science” and “spatial science”, and these developments have the potential to change the breadth of the “geographic imagination”. Several observations about dominant explanatory perspectives and substantive domains of geographic enquiry are also provided.     

Solid bitumen reflectance and Rock-Eval Tmax as maturation indices: an example from the “Nordegg Member”, Western Canada Sedimentary Basin

Marine, organic-rich rock units commonly contain little for vitrinite reflectance (VR₀) measurement, the most commoly used method of assessing thermal maturity. This is true of the Lower Jurassic “Nordegg Member”, a type I/II, sulphur-rich source rock from the Western Canada Sedimentary Basin. This study examines the advantages and pitfalls associated with the use of Rock-Eval T_max and solid bitumen reflectance (BR₀) to determined maturity in the “Nordegg”. Vitrinite reflectance data from Cretaceous coals and known coalification gradients in the study area are used to extrapolate VR₀ values for the “Nordegg”.T_max increases non-linearly with respect to both BR₀ and extrapolated VR₀ values. A sharp increase in the reflectaance of both solid bitumen and vitrinite occurs between T_max 440–450°C, and is coincident with a pronounced decrease in Hydrogen Index values and the loss of solid bitumen and telalginite fluorescence over the same narrow T_max interval. This T_max range is interpreted as the main zone of hydrocarbon generation in the “Nordegg”, and corresponds to extrapolated VR₀ values of 0.55–0.85%. The moderate to high sulphur contents in the kerogen played a significant role in determining the boundaries of the “Nordegg” oil window.A linear relationship between BR₀ and extrapolated VR₀, as proposed elsewhere, is not true for the “Nordegg”. BR₀ increases with respect to extrapolated VR₀ according to Jacob's (1985) formula (VR₀=0.618×(BR₀)+0.40) up to VR₀≈0.72% (BR₀≈0.52%). Beyond this point, BR₀ increases sharply relative to extrapolated VR₀, according to the relatioship VR₀ = 0.277 × (BR₀) + 0.57 (R² = 0.91). The break in the BR₀−VR₀ curve at 0.72%VR₀ is thought to signifiy the peak of hydrocarbon generation and represents a previously unrecognized coalification jump in the solid bitumen analogous to the first coalification jump of liptinites.     

Petrologic and geochemical characteristics of “barkinite” from the Dahe mine, Guizhou Province, China

Although “barkinite” has long been studied by many geologists, its geochemical characteristics and environment of deposition are still not known in detail. In order to study the petrography and geochemical characteristics of “barkinite”, coal samples from two Permian coal seams were taken from the Dahe mine, Guizhou Province. The samples were separated into maceral fractions, and then analyzed by microscopical, isotopic, Rock-Eval, and geochemical methods. The microscopical results indicate that “barkinite” occurs as four main types. According to their relationship to other maceral groups, “barkinite” is ostensibly formed under variably dry–wet or oxidizing–reducing conditions. The extract yield, isotope data and Rock-Eval values of “barkinite” are different from other macerals. Microscopical and geochemical results indicate that “barkinite” forms part of the liptinite group.     

Solid bitumens: an assessment of their characteristics, genesis, and role in geological processes

Familiar since antiquity, and subject in contemporary times to various characterization schemes, the exact nature of solid bitumen is not yet fully known. Bitumens have ‘random polymer-like’ molecular structures, are mobile as highly viscous fluids or were once fluids but have since turned into solids. Solid bitumens consist mainly of large moieties, of polyclyclic aromatic hydrocarbons, occasionally with finely admixed, fine-grained cryptocrystalline graphite. Solid bitumens are distinguished from kerogen, which is the syngenetic and generally finely dispersed particulate organic matter in sedimentary rock that virtually does not migrate following its deposition. Occurrences of solid bitumens are relevant to petroleum exploration as well as the search for, and evaluation of, a variety of metallic mineral deposits. Genesis of bitumen is in many cases linked to the thermal and hydrothermal history of organic matter in sedimentary rock. Apparently bitumen, or more specifically organic acids generated along with bitumen during diagenesis, may alter porosity of reservoir rocks or otherwise prepare the ground for ore deposition. Bitumen is also relatively sensitive to alteration processes, some of which, such as oxidative weathering, water leaching, biodegradation (contact) metamorphism and ionizing radiation may likewise affect its nature. Elemental composition of bitumen commonly reflects the nature of mineral deposits. Is is possible that in petroleum exploration, trace metal abundances of bitumen may eventually allow prediction of crude oil types and volumes anticipated from a given source rock? Beside transition elements, notably Ni and V, highly anomalous concentrations of U, Pt and Au occur in some solid bitumens. During the generation of petroleum from kerogen, the trend in δ¹³C is toward lighter values. The opposite seems to occur when liquid petroleum is subjected to thermal cracking (and /or related processes) yielding solid bitumen enriched in ¹³C, and isotopically light methane. In fact, except for deasphalting and possibly some irradiation processes, the result of thermal cracking, oxidation, water leaching, inspissation (drying) and bacterial degradation of crude oil is that lower molecular weight hydrocarbons are removed leaving bitumen residues enriched in aromatic hydrocarbons, heteroatomic compounds (NSO) and ¹³C. Such phenomena are relevant to bitumen paragenesis in petroleum reservoir rocks, to certain Phanerozoic occurrences of multiple generations of bitumens, and to bitumens in mineral deposits.     

The effects of radioactive decay of uranium on elemental and isotopic ratios of Alum shale kerogen

The organic matter in the Alum Shale of Sweden is believed to have been affected post-depositionally by irradiation from the natural decay of U. Alum Shale kerogen H/C ratios are inversely proportional to the natural log of the U concentration, presumably as a result of the liberation of H by irradiation of the organic matter. Stable isotopic ratios of¹³C/¹²C in Alum Shale kerogen are directly proportional to the natural log of the U concentration. Experimental irradiation of Green River shale generated hydrocarbon gases 18% lighter than the parent organic matter, which demonstrates the possibility that irradiation induced generation of isotopically light gases could lower¹³C/¹²C ratios in parent organic matter. Irradiation may be a factor governing the relation between¹³C/¹²C ratios in the Alum Shales. Alum Shale O/C ratios generally increase with increasing U concentration and it is suggested that irradiation of organic matter may facilitate oxidation. The “Rock-Eval” maturity parameters “P.I.” and “Tmax” decrease with increasing U concentration. “P.I.” is presumed to decrease as a result of bitumen destruction or polymerization by irradiation.     

Lithostratigraphic position and petrographic characteristics of R.A.T. (“Roches Argilo-Talqueuses”) Subgroup, Neoproterozoic Katangan Belt (Congo)

The Neoproterozoic Katangan R.A.T. (“Roches Argilo-Talqueuses”) Subgroup is a sedimentary sequence composed of red massive to irregularly bedded terrigenous-dolomitic rocks occurring at the base of the Katangan succession in Congo. Red R.A.T. is rarely exposed in a continuous section because it was affected by a major layer-parallel décollement during the Lufilian thrusting. However, in a number of thrust sheets, Red R.A.T. is in conformable sedimentary contact with Grey R.A.T which forms the base of the Mines Subgroup. Apart from the colour difference reflecting distinct depositional redox conditions, lithological, petrographical and geochemical features of Red and Grey R.A.T. are similar. A continuous sedimentary transition between these two lithological units is shown by the occurrence of variegated to yellowish R.A.T. The D. Strat. “Dolomies Stratifiées” formation of the Mines Subgroup conformably overlies the Grey R.A.T. In addition, a transitional gradation between Grey R.A.T. and D. Strat. occurs in most Cu–Co mines in Katanga and is marked by interbedding of Grey R.A.T.-type and D. Strat.-type layers or by a progressive petrographic and lithologic transition from R.A.T. to D. Strat. Thus, there is an unquestionable sedimentary transition between Grey R.A.T. and D. Strat. and between Grey R.A.T. and Red R.A.T.The R.A.T. Subgroup stratigraphically underlies the Mines Subgroup and therefore R.A.T. cannot be comprised of syn-orogenic sediments deposited upon the Kundelungu (formerly “Upper Kundelungu”) Group as suggested by Wendorff (2000). As a consequence, the Grey R.A.T. Cu–Co mineralisation definitely is part of the Mines Subgroup Lower Orebody, and does not represent a distinct generation of stratiform Cu–Co sulphide mineralisation younger than the Roan orebodies.     

A tentative explanation of the origin of “transform faults” (with a critical remark on the term)

The offsets on the ocean floor, usually called “transform-faults” are not shear faults common in solid Hookian rocks, but reflect the viscous Newtonian properties of laminar flow at the time when the upwelling magma along the spreading center was still in a liquid state. During spreading this liquid is carried away with the walls of the spreading center. This movement creates a pattern of stream lines in the liquid which run parallel to the direction of spreading. “Transform faults” are initiated along zones where a larger rate of shear disturbs the process of solidification. Consequently the strength of the basalt after solidification will be impaired along these zones. These weak zones will fracture under the thermo-elastic stresses during the final stage of cooling.The history of the term “transform fault” is discussed and the name “spreading offset” is proposed.     

The optical features and hydrocarbon-generating model of “barkinite” from Late Permian coals in South China

Leping coal is known for its high content of “barkinite”, which is a unique liptinite maceral apparently found only in the Late Permian coals of South China. “Barkinite” has previously identified as suberinite, but on the basis of further investigations, most coal petrologists conclude that “barkinite” is not suberinite, but a distinct maceral. The term “barkinite” was introduced by (State Bureau of Technical Supervision of the People's Republic of China, 1991, GB 12937-91 (in Chinese)), but it has not been recognized by ICCP and has not been accepted internationally.In this paper, elemental analyses (EA), pyrolysis-gas chromatography, Rock-Eval pyrolysis and optical techniques were used to study the optical features and the hydrocarbon-generating model of “barkinite”. The results show that “barkinite” with imbricate structure usually occurs in single or multiple layers or in a circular form, and no definite border exists between the cell walls and fillings, but there exist clear aperture among the cells.“Barkinite” is characterized by fluorescing in relatively high rank coals. At low maturity of 0.60–0.80%R_o, “barkinite” shows strong bright orange–yellow fluorescence, and the fluorescent colors of different cells are inhomogeneous in one sample. As vitrinite reflectance increases up to 0.90%R_o, “barkinite” also displays strong yellow or yellow–brown fluorescence; and most of “barkinite” lose fluorescence at the maturity of 1.20–1.30%R_o. However, most of suberinite types lose fluorescence at a vitrinite reflectance of 0.50% Ro, or at the stage of high volatile C bituminous coal. In particular, the cell walls of “barkinite” usually show red color, whereas the cell fillings show yellow color under transmitted light. This character is contrary to suberinite.“Barkinite” is also characterized by late generation of large amounts of liquid oil, which is different from the early generation of large amounts of liquid hydrocarbon. In addition, “barkinite” with high hydrocarbon generation potential, high elemental hydrogen, and low carbon content. The pyrolysis products of “barkinite” are dominated by aliphatic compounds, followed by low molecular-weight aromatic compounds (benzene, toluene, xylene and naphthalene), and a few isoprenoids. The pyrolysis hydrocarbons of “barkinite” are mostly composed of light oil (C₆–C₁₄) and wet gas (C₂–C₅), and that heavy oil (C₁₅⁺) and methane (C₁) are the minor hydrocarbon.In addition, suberinite is defined only as suberinized cell walls—it does not include the cell fillings, and the cell lumens were empty or filled by corpocollinites, which do not show any fluorescence. Whereas, “barkinite” not only includes the cell walls, but also includes the cell fillings, and the cell fillings show bright yellow fluorescence.Since the optical features and the hydrocarbon-generating model of “barkinite” are quite different from suberinite. We suggest that “barkinite” is a new type of maceral.     

An overview of the geology and major ore deposits of Central Africa: Explanatory note for the 1:4,000,000 map “Geology and major ore deposits of Central Africa”

This paper is prepared within the frameworks of IGCP Project 470 and the associated BRGM scientific project “Africa 1999–2004” to accompany the 1:4,000,000 scale map “Geology and major ore deposits of Central Africa, presented at the 20th Colloquium of African Geology in Orleans in June 2004. It incorporates geological and metallogenic data from eight countries in Central Africa (Angola, Cameroon, Chad, Central African Republic, Congo Brazzaville, Democratic Republic of Congo (DRC), Equatorial Guinea and Zambia). The map is a harmonised and geo-referenced preliminary map, based on a GIS at 1:2,000,000 scale, and focusses on the spatial and temporal distribution of selected major deposits.     

A tectonic interpretation of “Eburnean terrane” outliers in the Reguibat Shield, Mauritania

The Reguibat Shield comprises a western “Archaean terrane” and eastern “Eburnean terrane” juxtaposed during the early Palaeoproterozoic Eburnean Orogeny. Metasedimentary rocks of probable Palaeoproterozoic age are preserved as flat-lying klippen (Kediat Ijil and Guelb Zednes) and steep imbricate zones (El Mahaoudat range and Sfariat Belt). These are interpreted to record a phase of thrust tectonics that emplaced a continental margin succession onto a composite Archaean foreland prior to ca. 2.06 Ga sinistral transcurrent deformation. Together, these events reflect partitioned Eburnean transpression.     

SHRIMP U–Pb zircon geochronology and geochemistry of metavolcanic and metasedimentary rocks in Northwestern Fujian, Cathaysia block, China: Tectonic implications and the need to redefine lithostratigraphic units

Northwestern Fujian Province is one of the most important Pre-Palaeozoic areas in the Cathaysia Block of South China. Metavolcano-sedimentary and metasedimentary rocks of different types, ages and metamorphic grades (granulite to upper greenschist facies) are present, and previously were divided into several Formations and Groups. Tectonic contacts occur between some units, whereas (deformed) unconformities have been reported between others. New SHRIMP U–Pb zircon ages presented here indicate that the original lithostratigraphy and the old “Group” and “Formation” terminology should be abandoned. Thus the “Tianjingping Formation” was not formed in the Archaean or Palaeoproterozoic, as previously considered, but must be younger than its youngest detrital zircons (1790 Ma) but older than regional metamorphism (460 Ma). Besides magmatic zircon ages of 807 Ma obtained from metavolcano-sedimentary rocks of the “Nanshan Formation” and 751–728 Ma for the “Mamianshan Group”, many inherited and detrital zircons with ages ranging from 1.0 to 0.8 Ga were also found in them. These ages indicate that the geological evolution of the study area may be related to the assembly and subsequent break-up of the Rodinia supercontinent. The new zircon results poorly constrain the age of the “Mayuan Group” as Neoproterozoic to early Palaeozoic (728–458 Ma), and not Palaeoproterozoic as previously thought. Many older inherited and detrital zircons with ages of 3.6, 2.8, 2.7, 2.6–2.5, 2.0–1.8 and 1.6 Ga were found in this study. A 3.6 Ga detrital grain is the oldest one so far identified in northwestern Fujian Province as well as throughout the Cathaysia Block. Nd isotope t_DM values of eight volcano-sedimentary and clastic sedimentary rock samples centre on 2.73–1.68 Ga, being much older than the formation ages of their protoliths and thus showing that the recycling of older crust played an important role in their formation. These rocks underwent high grade metamorphism in the early Palaeozoic (458–425 Ma) during an important tectono-thermal event in the Cathaysia Block.     

Concepts for diamond exploration in “on/off craton” areas—British Columbia, Canada

The tectonic setting of British Columbia (BC) differs from classic diamond-bearing intracratonic regions such as the Northwest Territories and South Africa. Nevertheless, several diamond occurrences have been reported in BC. It is also known that parts of the province are underlain by Proterozoic and possibly Archean basement. Because the continents of today are composites of fragments of ancient continents, it is possible that some of the regions underlain by old crystalline basement in eastern British Columbia were associated with a deep crustal keel. The keel may have predated the break-up of the early Neoproterozoic supercontinent called Rodinia and was preserved possibly until the Triassic. Some of these old continental fragments may have been displaced relative to their position of origin and dissociated from their keel, or the keel may have since been destroyed. Such fragments represent favourable exploration grounds in terms of the “Diamondiferous Mantle Root” model (DMR model) if they were intersected by kimberlites or lamproites prior to displacement or destruction of their underlying deep keel. Therefore, extrapolation of fragments of the diamond-bearing Precambrian basement from the Northwest Territories or Alberta to BC provides a sufficient reason for initiating reconnaissance indicator mineral surveys. The “Eclogite Subduction Zone” model (ES model) predicts formation of diamonds at lower pressure (i.e., depth) than required by the DMR model in convergent tectonic settings. Although not proven, this model is supported by thermal modeling of cold subduction zones and recent discoveries of diamonds in areas characterized by convergent tectonic settings. If the ES model is correct, then the parts of BC with a geological history similar to today's “cold” subduction zones, such as Honshu (Japan), or to continental collision zones, such as Kokchetav massif (Kazakhstan) and the Dabie–Sulu Terrane (east central China), may be diamondiferous. The terranes where geological evidences suggest an ultrahigh pressure (UHP) metamorphic event followed by rapid tectonic exhumation (which could have prevented complete resorption of diamonds on their journey to the surface) are worth investigating. If UHP rocks were intercepted at depth by syn- or post-subduction diamond elevators, such as kimberlites, lamproites, lamprophyres, nephelinites or other alkali volcanic rocks of deep-seated origin, the diamond potential of the area would be even higher.     

A risky business: Mining, rent and the neoliberalization of “risk”

Natural resource investment in the mining sector is often mediated through conflicts over rent distribution between corporate capital and landowner states. Recent rounds of neoliberal policy promoted by the World Bank have highlighted the need for landowner states to offer incentives in order to attract “high risk” capital investment. In Sub-Saharan Africa, in particular, countries have been pushed to offer attractive fiscal terms to capital, thereby lowering the proportion traditionally called rent. This paper examines how the concept of “risk” has been mobilized to legitimate such skewed distributional arrangements. While certain conceptions of social and ecological “risk” have been prevalent in political and social theoretic discourse on mining, such focus elides the overwhelming contemporary power of our notion of “neoliberal risk” – or the financial/market risks – in actually setting the distributional terms of mineral investment. We illustrate our argument by examining the nexus of World Bank mining policy promotion and Tanzanian policy in the late 1990s meant to attract foreign direct investment in gold production. In closing, we suggest that just as “risk” is used to legitimate attractive fiscal terms for investment, recent events highlight how skewed distribution of benefits may set into motion risks that corporate capital had not bargained for.     

“Normal” and “inverted” metamorphic isograds and their relation to syntectonic proterozoic batholiths in the Wopmay Orogen, Northwest Territories, Canada

Three progressive metamorphic suites are developed in pelitic rocks of the northern Wopmay Orogen. Two suites are related to the Hepburn Batholith and one to the Wentzel Batholith. All three suites are cut by post-metamorphic wrench faults, some of which have significant vertical displacement. The structural relief so provided reveals that medium-and high-grade isograds associated with the Hepburn Batholith dip inward towards the batholith and are thus “hot-side-up”. Isograds associated with the Wentzel Batholith dip away from the batholith and are thus “hot-side-down”. It is concluded that Hepburn Batholith has the form of the flattened funnel fed from depth, and that Wentzel Batholith is the arched roof of an intrusive complex of unknown shape at depth.     

“Traditional” women, “modern” water: Linking gender and commodification in Rajasthan, India

In this paper, I analyze the connections made between women and water in a Rajasthani drinking water supply project as a significant part of drinking water’s commodification. For development policy makers, water progressing from something free to something valued by price is inevitable when moving economies toward modernity and development. My findings indicate that water is not commodified simply by charging money for it, but through a series of discourses and acts that link it to other “modern” objects and give it value. One of these objects is “women”. I argue that through women’s participation activities that link gender and modernity to new responsibilities and increased mobility for village women involving the clean water supply, a “traditional” Rajasthani woman becomes “modern”. Water, in parallel, becomes “new”, “improved” and worth paying for. Women and water resources are further connected through project staff’s efforts to promote latrines by targeting women as their primary users. The research shows that villagers applied their own meanings to latrines, some of which precluded women using them. This paper fills a gap in feminist political ecology, which often overlooks how gender is created through natural resource interventions, by concerning itself with how new meanings of “water” and “women” are mutually constructed through struggles over water use and its commodification. It contributes to critical development geography literatures by demonstrating that women’s participation approaches to natural resource development act as both constraints and opportunities for village constituents. It examines an under-explored area of gender and water research by tracing village-level struggles over meanings of latrines.     

Comparison of source rock geochemistry of selected rocks from the Schei Point group and Ringnes formation, Sverdrup basin, arctic Canada

Organic-rich from the Schei Point group (middle to late Triassic in age) and the Ringnes formation (late Jurassic) from the Sverdrup basin of the Canadian arctic archipelago have been geochemically evaluated for source rock characterization. Most samples from the Schei Point group are organic-rich (> 2% TOC and are considered as immature to mature oil-prone source rocks [kerogen types I, I–II (IIA) and II (IIA)]. These kerogen types contain abundant AOM1, AOM2 and alginite (Tasmanales, Nostocopsis, Leiosphaeridia, acritarch and dinoflagellate) with variable amounts of vitrinite, inertinite and exinite. Samples from the Ringnes formation contain dominant vitrinite and inertinite with partially oxidized AOM2, alginite and exinite forming mostly immature to mature condensate- and gas-prone source rocks [kerogen type II–III (IIB), III and a few II (IIA)]. Schei Point samples contain higher bitumen extract, saturate hydrocarbons and saturate/ aromatic ratio than the Ringnes samples. Triterpane and sterane (dominant C₃₀) distribution patterns and stable carbon isotope of bitumen and kerogen suggest that the analyzed samples from the Schei Point group are at the onset of oil generation and contain a mixture of sapropelic (algal) and minor terrestrial humic organic matter. Sterane carbon number distributions in the Ringnes formation also suggest a mixed algal and terrestrial organic matter type. There are some variations in hopane carbon number distributions, but these are apparently a function of thermal maturity rather than significant genetic differences among samples. Pyrolysis-gas chromatography/mass spectrometry of the two samples with similar maturity shows that the Schei Point sample generates three times more pyrolyzate than the Ringnes sample. Both samples have a dominant aliphatic character, although the Ringnes sample contains phenol and an aromaticity that is higher than that of the Schei Point sample.     

东南亚地区烃源岩特征与主控因素

通过对东南亚主要含油气盆地沉积、构造特征的研究,揭示其烃源岩具有多期发育的特点.其中,始新统、渐新统和中新统是东南亚主要的3套烃源岩;前新生代生油岩分布局限,但具有一定的生烃潜力.以新生代河流-三角洲近岸沉积环境、含陆源干酪根的煤系和碳质页(泥)岩为主,其次为湖相和海相沉积环境泥岩和页岩.有机碳含量均已达到中等-好的源岩标准,以Ⅱ-Ⅲ型干酪根为主,大部分烃源岩都处于成熟到过成熟阶段.新生代烃源岩主要受盆地演化阶段和沉积环境两大地质因素控制,与区域海侵作用的方向和规模密切相关.烃源岩有机质类型的不同和热演化程度的差异,是形成东南亚地区多类型油气藏的重要因素之一.      

Leaching of inorganics in the Cretaceous Greymouth coal beds, South Island, New Zealand

Leaching processes are believed to be responsible for the unusually low-ash content (sometimes less than 1%) of the thick (up to 35 m) Cretaceous coals located in the Greymouth coalfield, South Island, New Zealand. Although leaching of inorganics in peat is a generally accepted process, little is known about leaching after burial. The “Main” and “E” seams in the Greymouth coalfield show good correlation between low ash and bed thickness. The ash content, however, is often less than 1%, which is lower than most known modern analogues (i.e. peat). There are several lines of evidence that suggest that mineral matter may have been removed from the coal not only in the peat stage but also after burial. For example, etching features found in quartz grains and clay aggregates indicate that some leaching processes have taken place. In addition, liptinitic material (e.g., bitumen) in the cleat networks supports the conclusion that there has been some movement of solutions through the coal after burial. These solutions may have helped to remove some of the inorganics originally within the Greymouth coals.