Geochemical characteristics of Tertiary saline lacustrine oils in the Western Qaidam Basin,northwest China

Based on the systematic analyses of light hydrocarbon, saturate, aromatic fractions and C isotopes of over 40 oil samples along with related Tertiary source rocks collected from the western Qaidam basin, the geochemical characteristics of the Tertiary saline lacustrine oils in this region was investigated. The oils are characterized by bimodal n-alkane distributions with odd-to-even (C₁₁–C₁₇) and even-to-odd (C₁₈–C₂₈) predominance, low Pr/Ph (mostly lower than 0.6), high concentration of gammacerane, C₃₅ hopane and methylated MTTCs, reflecting the high salinity and anoxic setting typical of a saline lacustrine depositional environment. Mango’s K₁ values in the saline oils are highly variable (0.99–1.63), and could be associated with the facies-dependent parameters such as Pr/Ph and gammacerane indexes. Compared with other Tertiary oils, the studied Tertiary saline oils are marked by enhanced C₂₈ sterane abundance (30% or more of C₂₇–C₂₉ homologues), possibly derived from halophilic algae. It is noted that the geochemical parameters of the oils in various oilfields exhibit regular spatial changes, which are consistent with the depositional phase variations of the source rocks. The oils have uncommon heavy C isotopic ratios (−24‰ to −26‰) and a flat shape of the individual n-alkane isotope profile, and show isotopic characteristics similar to marine organic matter. The appearance of oleanane and high 24/(24 + 27)-norcholestane ratios (0.57–0.87) in the saline oils and source rocks confirm a Tertiary organic source.     

Improved understanding of the petroleum systems of the Niger Delta Basin,Nigeria

Biomarker and n-alkane compound specific stable carbon isotope analyses (CSIA) were carried out on 58 crude oil samples from shallow water and deepwater fields of the Niger Delta in order to predict the depositional environment and organic matter characteristics of their potential source rocks. Using a source organofacies prediction approach from oil geochemistry, the presence in the western deepwater oils relatively abundant C₂₇ steranes, C₃₀ 24-n-propyl cholestane, low oleanane index, relatively low pr/ph ratios, gammacerane, and positive to nearly flat C₁₂–C₃₀ n-alkane compound specific stable carbon isotope profiles, suggests that the source facies that expelled these oils contain significant marine derived organic matter deposited under sub-oxic and stratified water column conditions. This contrasts with the terrigenous organic matter dominated source rocks accepted for shallow water Niger Delta oils. Oils in the shallow water accumulations can be separated into terrigenous and mixed marine-terrigenous families. The terrigenous family indicates expulsion from source rock(s) containing overwhelmingly higher plant source organic matter (average oleanane index = 0.48, high C₂₉ steranes) as well as having negative sloping n-alkane isotope profiles. Oxic source depositional conditions (pr/ph > 2.5) and non-stratified conditions (absence to low gammacerane content) are inferred for the terrigenous family. The mixed marine-terrigenous family has biomarker properties that are a combination of the deepwater and terrigenous shallow water oils. Bitumen extracts of the sub-delta Late Cretaceous Araromi Formation shale in the Dahomey Basin are comparable both molecularly and isotopically to the studied western deepwater oil set, but with an over all poor geochemical correlation. This poor geochemical match between Araromi shale and the western deepwater oils does not downgrade the potential of sub-delta Cretaceous source rock contribution to the regional oil charge in the deepwater Niger Delta.     

Use of biomarker distributions and compound specific isotopes of carbon and hydrogen to delineate hydrocarbon characteristics in the East Sirte Basin (Libya)

Biomarker ratios, together with stable carbon (δ¹³C) and hydrogen (δD) isotopic compositions of individual hydrocarbons have been determined in a suite of crude oils (n = 24) from the East Sirte Basin to delineate their sources and respective thermal maturity. The crude oil samples are divided into two main families (A and B) based on differences in source inputs and thermal maturity. Using source specific parameters including pristane/phytane (Pr/Ph), hopane/sterane, dibenzothiophene/phenanthrene (DBT/P), Pr/n-C₁₇ and Ph/n-C_l8 ratios and the distributions of tricyclic and tetracyclic terpanes, family B oils are ascribed a marine source rock deposited under sub-oxic conditions, while family A oils have a more terrigenous source affinity. This genetic classification is supported by the stable carbon isotopic compositions (δ¹³C) of the n-alkanes. Using biomarker maturity parameters such as the abundance of Pr and Ph relative to n-alkanes and the distribution of sterane and hopane isomers, family A oils are shown to be more thermally mature than family B oils. The contrasting maturity of the two families is supported by differences between the stable hydrogen isotopic compositions (δD) of Pr and Ph and the n-alkanes, as well as the δ¹³C values of n-alkanes in their respective oils.     

Stable carbon isotopic compositions of individual aromatic hydrocarbons as source and age indicators in oils from western Australian basins

The present study aims to establish the factors controlling the stable carbon isotopic compositions (δ¹³C) of individual aromatic hydrocarbons analysed by compound specific isotope analysis (CSIA) in crude oils from western Australian petroleum basins of varying age and facies type. This paper reports δ¹³C values of individual aromatic hydrocarbons, like alkylbenzenes, alkylnaphthalenes, alkylphenanthrenes and methylated biphenyls. The main aims are to confirm the origin (source) and age of these oils based on CSIA of selected aromatic compounds and to understand why the Sofer plot is ineffective in establishing the source of western Australian petroleum systems. The bulk δ¹³C of saturated and aromatic hydrocarbon fractions of crude oils have been previously used to differentiate sources, however, many Australian crude oils are not classified correctly using this method. The oils were classified as marine by the δ¹³C values of individual aromatic compounds and as terrigenous based on the bulk δ¹³C data (Sofer plot).The oils where the δ¹³C values of 1,6-DMN and 1,2,5-TMN isomers are most negative are indicative of a marine source, whereas oils with a less negative values for the 1,6-DMN and 1,2,5-TMN isomers are derived from marine source rocks that contain a significant terrigenous component. Similarly, oils with the least negative δ¹³C values for the 1-MP and 1,9-DMP isomers reflect varying inputs of terrigenous organic matter to the their marine source rocks. Plots of P/DBT and Pr/Ph concentration ratios versus δ¹³C values of DMP, 1,6-DMN, 1,2,5-TMN, 1-MP and 1,9-MP are constructed to establish the relative amount of terrigenous organic matter contributing to the source rock of a series of marine oils. The ratios of P/DBT and Pr/Ph plotted against the δ¹³C values of the aromatic isomers (such as 1,6-DMN, 1,2,5-TMN, 1-MP and 1,9-MP) provide a novel and convenient way to discriminate crude oils derived from different source rocks that contain varying amounts of marine and terrigenous organic matter.     

Origin of oils in the Eastern Papuan Basin,Papua New Guinea

The geochemical characteristics of 16 oils/condensates/seep oil/oil shows (collectively called oils) from the Eastern Papuan Basin (EPB) and one seep oil from the Western Papuan Basin (WPB) are integrated with data from previous studies of oils, fluid inclusion oils and solid bitumens from the EPB and WPB, Papua New Guinea. The combined set of samples can be divided in two major families of hydrocarbons. The Family A oils, mostly occurring in the WPB region, were generated from clay rich marine source rocks, containing predominantly terrigenous higher plant derived organic matter (OM) deposited in a sub-oxic to oxic environment. Source rock(s) for Family A oils are likely to be of Middle to Upper Jurassic, e.g., the Upper Jurassic Imburu Formation. The Family B oils, distributed mainly in the EPB region, were generated from Cretaceous or younger marine carbonate source rock(s) deposited under anoxic to sub-oxic conditions, and containing predominantly prokaryotic OM with some terrigenous higher plant inputs. The EPB natural gases analyzed in this study may be co-genetic to the co-occurring Family B oils in the EPB. Both Family A and B oils were generated at similar thermal maturities of 1.0–1.3% vitrinite reflectance equivalent. Although no source interval to date has been firmly identified in the EPB, post-Jurassic strata are a viable option, because (1) Late Cretaceous and Paleogene carbonate and clastic marine sediments including possible source lithologies are present, and (2) this section of the Papuan Basin sustained rapid sedimentation and tectonic loading, particularly in the Cenozoic.     

Origin of the unusually high dibenzothiophene oils in Tazhong-4 Oilfield of Tarim Basin and its implication in deep petroleum exploration

Unusually high dibenzothiophene (DBT) concentrations are present in the oils from the Tazhong-4 Oilfield in the Tazhong Uplift, Tarim Basin. Positive-ion electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used in combination with conventional geochemical approaches to unravel the enrichment mechanisms. Significant amounts of S₁ species with relatively low DBE values (0–8), i.e., sulfur ethers, mercaptans, thiophenes and benzothiophenes, were detected in three Lower Ordovician oils with high thermal maturity, which were suggested to be the products of thermochemical sulfate reduction (TSR) in the reservoir. The occurrence of TSR was also supported by the coexistence of thiadiamondoids and abundant H₂S in the gases associated with the oils. Obviously low concentrations of the DBE = 9 S₁ species (mainly equivalent to C₀–C₃₅ DBTs) compared to its homologues were observed for the three oils which were probably altered by TSR, indicating that no positive relationship existed between TSR and DBTs in this study. The sulfur compounds in the Tazhong-4 oils are quite similar to those in the majority of Lower Ordovician oils characterized by high concentrations of DBTs and dominant DBE = 9 S₁ species with only small amounts of sulfur compounds with low thermal stability (DBE = 0–8), suggesting only a small proportion of sulfur compounds were derived from TSR. It is thermal maturity rather than TSR that has caused the unusually high DBT concentrations in most of the Lower Ordovician oils. We suggest that the unusually high DBT oils in the Tazhong-4 Oilfield are caused by oil mixing from the later charged Lower Ordovician (or perhaps even deeper), with high DBT abundances from the earlier less mature oils, which was supported by our oil mixing experiments and previous relevant investigations as well as abundant authigenic pyrite of hydrothermal origin. We believe that TSR should have occurred in the Tazhong Uplift based on our FT-ICR MS results. However, normal sulfur compounds were detected in most oils and no increase of δ¹³C₂H₆–δ¹³C₄H₁₀ was observed for the gas hydrocarbons, suggesting only a slight alteration of the oils by TSR currently and/or recently. We suspect that the abnormal sulfur compounds in the Lower Ordovician oils might also be a result of deep oil mixing, which might imply a deeper petroliferous horizon, i.e., Cambrian, with a high petroleum potential. This study is important to further deep petroleum exploration in the area.     

Pregnanes as molecular indicators for depositional environments of sediments and petroleum source rocks

Steroids with unconventional side chains have increasingly been applied as diagnostic markers for geological source and age assessments. However, one of the most distinctive characteristics, the abnormal abundance of pregnane and homopregnane in ancient sediments and petroleum, remains unresolved. Higher pregnane and homopregnane, as well as C₂₃–C₂₆ 20-n-alkylpregnanes, relative to the regular steranes were observed in samples collected from different petroleum basins in China. These included Precambrian marine carbonate-derived petroleum (NW Sichuan Basin), Lower Paleozoic marine marl derived crude oils (Tarim Basin), and Eocene hypersaline lacustrine carbonate source rocks and associated petroleum (Bohai Bay Basin). However, all of the samples have many common biomarker characteristics, such as pristane/phytane ratios < 1, low amounts of diasteranes and high C₂₉/C₃₀ hopane (∼0.6–1), C₃₅/C₃₄ hopane (mostly ⩾ 1) and dibenzothiophene/phenanthrene (DBT/PHEN, mostly 0.5–1) ratios revealing a contribution from anoxic carbonate/marl source rocks deposited in restricted, clastic-starved settings. We suggest that 5α,l4β,l7β-pregnane and homopregnane, as well as their higher C₂₃–C₂₆ homologues, are geological products derived from steroids bound to the kerogen by a sulfurized side chain. Carbon or carbonate minerals are considered to be natural catalysts for this cracking reaction via preferential cleavage of the bond between C-20 and C-22. Similar distributions occur in the short chain analogues of 4-methylsterane, triaromatic steroid and methyltriaromatic steroid hydrocarbons, providing circumstantial evidence for this proposal. The ratio of pregnane and homopregnane to the total regular steranes and the ratio of C₂₇ diasteranes to cholestanes can be sensitive indicators of sedimentary environments and facies. In general, high diasteranes and low pregnanes (with homologues) indicate an oxic water column or significant input of terrigenous organic matter in clay rich source rocks and some organic lean carbonate rocks. Low diasteranes with high pregnanes implies restricted, sulfur rich conditions, typical of anoxic carbonate source rocks. Furthermore, the two ratios may be useful to assess the variation of mineralogy and openness of source rock depositional settings.     

Extreme positive Ce-anomalies in a 3.0 Ga submarine volcanic sequence,Murchison Province: Oxygenated marine bottom waters

Systematic positive anomalies of Ce, where Ce/Ce* spans 2.1 to 11.4, are present in basalts and rhyolites of a 2.96 Ga submarine volcanic sequence of the Murchison Province, Western Australia. This volcanic sequence is host to a stratabound Cu–Zn deposit that formed on the seafloor from a seawater hydrothermal system. These are true Ce anomalies as Pr/Pr* < 1. In modern oxygenated marine water Ce is sequestered by Mn-oxides and hydroxides, which coprecipitate with Fe-oxides and hydroxides as nodules and crusts on the ocean floor, as well as Fe–Mn chemical sediments from hydrothermal systems at ocean spreading centers. Fe–Mn sediments have positive Ce anomalies and marine water complementary negative anomalies. Such Ce anomalies have not formerly been reported for Archean hydrothermally altered volcanic rocks. These extreme anomalies are attributed to Mn-transport in shallow-circulating oxygenated marine bottom waters peripheral to the deeper, hotter, hydrothermal system from which the Cu–Zn deposit formed, and record an oxygenated marine environment ~ 500 Ma before the so-called great oxidation event at ~ 2.4 Ga. Results for positive Ce anomalies in the Golden Grove volcanic sequence are complementary to negative anomalies in Archean BIF, collectively stemming from particulate scavenging of Ce^+ 3 in an oxic water column.     

Characterization of organic matter and depositional environment of Tertiary mudstones from the Sylhet Basin,Bangladesh

The Sylhet Basin of Bangladesh is a sub-basin of the Bengal Basin. It contains a very thick (up to 22 km) Tertiary stratigraphic succession consisting mainly of sandstones and mudstones. The Sylhet succession is divided into the Jaintia (Paleocene–late Eocene), Barail (late Eocene–early Miocene), Surma (middle–late Miocene), Tipam (late Miocene–Pliocene) and Dupitila Groups (Pliocene–Pleistocene), in ascending order. The origin of the organic matter (OM) and paleoenvironment of deposition have been evaluated on the basis of C, N, S elemental analysis, Rock-Eval pyrolysis and gas chromatography–mass spectrometry (GC–MS) analysis of 60 mudstone samples collected from drill core and surface outcrops. Total organic carbon (TOC) content ranges from 0.11% to 1.56%. Sulfur content is low in most samples. TOC content in the Sylhet succession varies systematically with sedimentation rate, with low TOC caused by clastic dilution produced by high sedimentation rates arising from rapid uplift and erosion of the Himalaya.The OM in the succession is characterized by systematic variations in pristane/phytane (Pr/Ph), oleanane/C₃₀ hopane, n-C₂₉/n-C₁₉ alkane, Tm/Ts [17α(H)-22,29,30-trisnorhopane/18α(H)-22,29,30-trisnorhopane] and sterane C₂₉/(C₂₇ + C₂₈ + C₂₉) ratios during the middle Eocene to Pleistocene. Based on biomarker proxies, the depositional environment of the Sylhet succession can be divided into three phases. In the first (middle Eocene to early Miocene), deposition occurred completely in seawater-dominated oxic conditions, with abundant input of terrestrial higher plants, including angiosperms. The second phase (middle to late Miocene) consisted of mainly freshwater anoxic conditions along with a small seawater influence according to eustasic sea level change, with diluted OM derived from phytoplankton and a lesser influence from terrestrial higher plants. Oxygen-poor freshwater conditions prevailed in the third phase (post-late Miocene). Planktonic OM was relatively abundant in this stage, while a high angiosperm influx prevailed at times. T_max values of ca. 450 °C, vitrinite reflectance (R_o) of ca. 0.66% and methylphenanthrene index (MPI 3) of ca. 1 indicate the OM to be mature. The lower part (middle Eocene to early Miocene) of the succession with moderate TOC content and predominantly terrestrial OM could have generated some condensates and oils in and around the study area.     

Scarcity of the C30 sterane biomarker, 24-n-propylcholestane,in Lower Paleozoic marine paleoenvironments

24-n-Propylcholestane (24-npc), a C₃₀ sterane compound derived from sterol precursors which are the major sterol constituents of modern pelagophyte microalgae, occurs in certain Neoproterozoic rocks and oils and throughout the Phanerozoic rock record. This broad distribution leads 24-npc to be widely considered a reliable indicator of open to partially restricted marine depositional conditions for source rocks and oils. Here we report two significant hiatuses in the occurrences of 24-npc in the Lower Paleozoic marine rock record: the first in the Middle–Late Cambrian and the second in the Late Ordovician–early Silurian transition for a range of lithofacies (carbonates and siliciclastic rocks), organic carbon contents (both organic-lean and organic-rich), and paleoceanographic environments (shelf and deeper water marine settings) and observed offshore of two paleocontinents, Laurentia and Baltica. The Ordovician–Silurian gap is at least 9 million years, and possibly up to 20 million years, in duration. Robust older occurrences of 24-npc steranes in some Neoproterozoic rocks and oils suggest that oceanographic conditions in our intervals of Lower Paleozoic time were unfavorable for the proliferation of pelagophyte algae as phytoplankton. Caution should therefore be applied when interpreting a lacustrine versus marine depositional environmental setting for source rocks and oils in these intervals of Early Paleozoic time using lipid biomarker assemblages.     

Organic geochemical characteristics and oil generating potential of the Upper Jurassic Safer shale sediments in the Marib-Shabowah Basin,western Yemen

The organic rich Safer shales exposed in the north-central part of onshore Marib-Shabowah Basin are evaluated and their depositional environments are interpreted. Total organic carbon contents (TOC) of the shales range from 1.02–16.8 wt%, and yield hydrogen index (HI) values ranging from 130 to 820 mg HC/g TOC, consistent with mainly Type II with minor contributions from Type I and mixed Types II–III kerogens. The Safer shale samples have vitrinite reflectance values in the range of 0.5–1.0 R_o%, indicating early mature to peak mature stage for oil generation. T_max values range from 429–438 °C, which are in reasonably good agreement with vitrinite reflectance data. Kerogen microscopy shows that the Safer shales are characterized by high amounts of organic matter, consisting predominantly of yellow fluorescing amorphous organic matter and alginite of marine origin. This is supported by their high content of hydrogen rich Type II and I oil-prone kerogen.The biomarker distributions of the Upper Jurassic Safer extracts are characterized by dominant low to medium molecular weight compounds (n-C₁₄ to n-C₂₀), low Pr/Ph ratio (<1.0), high phytane/n-C₁₈ ratios (0.82–2.68), and predominant regular sterane C₂₇. All biomarker parameters clearly indicate that the organic matter was derived from marine algal inputs and deposited under anoxic (reducing) conditions. Hypersaline conditions also prevailed during deposition of these sediments, as indicated by the presence of gammacerane.     

Geochemical and isotopic approach to maturity/source/mixing estimations for natural gas and associated condensates in the Thrace Basin,NW Turkey

The Tertiary Thrace Basin located in NW Turkey comprises 9 km of clastic-sedimentary column ranging in age from Early Eocene to Recent in age. Fifteen natural gas and 10 associated condensate samples collected from the 11 different gas fields along the NW–SE extending zone of the northern portion of the basin were evaluated on the basis of their chemical and individual C isotopic compositions. For the purpose of the study, the genesis of CH₄, thermogenic C₂₊ gases, and associated condensates were evaluated separately.Methane appears to have 3 origins: Group-1 CH₄ is bacteriogenic (Calculated δ¹³C_C1–C = −61.48‰; Silivri Field) and found in Oligocene reservoirs and mixed with the thermogenic Group-2 CH₄. They probably formed in the Upper Oligocene coal and shales deposited in a marshy-swamp environment of fluvio-deltaic settings. Group-2 (δ¹³C_C1–C = −35.80‰; Hamitabat Field) and Group-3 (δ¹³C_1–C = −49.10‰; Değirmenköy Field) methanes are thermogenic and share the same origin with the Group-2 and Group-3 C₂₊ gases. The Group-2 C₂₊ gases include 63% of the gas fields. They are produced from both Eocene (overwhelmingly) and Oligocene reservoirs. These gases were almost certainly generated from isotopically heavy terrestrial kerogen (δ¹³C = −21‰) present in the Eocene deltaic Hamitabat shales. The Group-3 C₂₊ gases, produced from one field, were generated from isotopically light marine kerogen (δ¹³C = −29‰). Lower Oligoce ne Mezardere shales deposited in pro-deltaic settings are believed to be the source of these gases.The bulk and individual n-alkane isotopic relationships between the rock extracts, gases, condensates and oils from the basin differentiated two Groups of condensates, which can be genetically linked to the Group-2 and -3 thermogenic C₂₊ gases. However, it is crucial to note that condensates do not necessarily correlate to their associated gases.Maturity assessments on the Group-1 and -2 thermogenic gases based on their estimated initial kerogen isotope values (δ¹³C = −21‰; −29‰) and on the biomarkers present in the associated condensates reveal that all the hydrocarbons including gases, condensates and oils are the products of primary cracking at the early mature st age (R_eq = 0.55–0.81%). It is demonstrated that the open-system source conditions required for such an early-mature hydrocarbon expulsion exist and are supported by fault systems of the basin.     

Occurrence and composition of solid bitumens from the Bulonggoer Devonian paleo-oil reservoir,North Xinjiang,China

The Bulonggoer paleo-oil reservoir (BPR) on the northwest Junggar Basin is the first Devonian paleo-oil reservoir discovered in North Xinjiang, China. Solid bitumens occur within sandstone pores and as veins filling fractures. Samples of both types were analyzed using stable carbon isotope and reflectance measurements, as well as molecular biomarker parameters.The extremely positive δ¹³C values and biomarker indicators of depositional environment/lithology, such as pristane/phytane (Pr/Ph), C₂₉/C₃₀ hopane, diasteranes/regular steranes and dibenzothiophene/phenanthrene ratios, indicate a siliciclastic source for the BPR and their deposition in a highly reducing hypersaline environment. The presence of long chain n-alkanes and abundant tetracyclic diterpanes, C₂₀–C₂₁ tricyclic terpanes and perylene are indicators of higher plant organic matter input. Moreover, the bimodal distribution of C₂₇ > C₂₈ < C₂₉ regular steranes and abundant methyltriaromatic steroids also support a contribution of microalgae as well as higher plants organic matter. The similar molecular composition and thermal maturity parameters indicate that the reservoir and veined solid bitumens were altered from a common paleo-petroleum, which originated from peak oil window matured source rocks.All solid bitumens from the BPR are characterized by relatively low bitumen reflectance values (Rb% < 0.7), suggesting that they were generated from low temperature processes rather than oil thermal cracking. Comparatively, the Rb% values for veined bitumens are higher than reservoir bitumens, indicating that the veined bitumens occurred earlier and experienced higher thermal conditions.     

Petroleum geochemistry of the Potwar Basin, Pakistan: 1. Oil-oil correlation using biomarkers, δC and δD

Geochemical characterisation of 18 crude oils from the Potwar Basin (Upper Indus), Pakistan is carried out in this study. Their relative thermal maturities, environment of deposition, source of organic matter (OM) and the extent of biodegradation based on the hydrocarbon (HC) distributions are investigated. A detailed oil-oil correlation of the area is established. Gas chromatography-mass spectrometry (GC-MS) analyses and bulk stable carbon and hydrogen isotopic compositions of saturated and aromatic HC fractions reveals three compositional groups of oils. Most of the oils from the basin are typically generated from shallow marine source rocks. However, group A contains terrigenous OM deposited under highly oxic/fluvio-deltaic conditions reflected by high pristane/phytane (Pr/Ph), C₃₀ diahopane/C₂₉Ts, diahopane/hopane and diasterane/sterane ratios and low dibenzothiophene (DBT)/phenanthrene (P) ratios. The abundance of C₁₉-tricyclic and C₂₄-tetracyclic terpanes are consistent with a predominant terrigenous OM source for group A. Saturated HC biomarker parameters from the rest of the oils show a predominant marine origin, however groups B and C are clearly separated by bulk δ¹³C and δD and the distributions of the saturated HC fractions supporting variations in source and environment of deposition of their respective source rocks. Moreover, various saturated HC biomarker ratios such as steranes/hopanes, diasteranes/steranes, C₂₃-tricyclic/C₃₀ hopane, C₂₈-tricyclic/C₃₀ hopane, total tricyclic terpanes/hopanes and C₃₁(R + S)/C₃₀ hopane show that two different groups are present. These biomarker ratios show that group B oils are generated from clastic-rich source rocks deposited under more suboxic depositional environments compared to group C oils. Group C oils show a relatively higher input of algal mixed with terrigenous OM, supported by the abundance of extended tricyclic terpanes (up to C₄₁₊) and steranes.Biomarker thermal maturity parameters mostly reached to their equilibrium values indicating that the source rocks for Potwar Basin oils must have reached the early to peak oil generation window, while aromatic HC parameters suggest up to late oil window thermal maturity. The extent of biodegradation of the Potwar Basin oils is determined using various saturated HC parameters and variations in bulk properties such as API gravity. Groups A and C oils are not biodegraded and show mature HC profiles, while some of the oils from group B show minor levels of biodegradation consistent with high Pr/n-C₁₇, Ph/n-C₁₈ and low API gravities.     

Origin and depositional environments of source rocks and crude oils from Niger Delta Basin: Carbon isotopic evidence

Thirty-nine crude oils and twenty-one rock samples from Niger Delta Basin, Nigeria have been characterized based on their isotope compositions by elemental analysis-isotope ratio mass spectrometry and gas chromatography-isotope ratio mass spectrometry. The bulk carbon isotopic values of the whole rock extracts, saturate and aromatic fractions range from –28.7‰ to –26.8‰, –29.2‰ to –27.2 ‰ and –28.5 ‰ to –26.7 ‰, respectively while the bulk carbon isotopic values of the whole oils, saturate and aromatic fractions range from –25.4 ‰ to –27.8 ‰, –25.9 ‰ to –28.4 ‰ and –23.5 ‰ to –26.9 ‰, respectively. The average carbon isotopic compositions of individual alkanes (nC₁₂-nC₃₃) in the rock samples range from –34.9‰ to –28.2‰ whereas the average isotopic values of individual n-alkanes in the oils range from –31.1‰ to –23.8‰. The δ¹³C isotope ratios of pristane and phytane in the rock samples range from –29.2 ‰ to –28.2 ‰ and –30.2 ‰ to –27.4 ‰ respectively while the pristane and phytane isotopic values range from –32.1‰ to –21.9‰ and –30.5‰ to –26.9‰, respectively. The isotopic values recorded for the samples indicated that the crude oils were formed from the mixed input of terrigenous and marine organic matter and deposited under oxic to sub-oxic condition in lacustrine-fluvial/deltaic environments. The stable carbon isotopic compositions were found to be effective in assessing the origin and depositional environments of crude oils in the Niger Delta Basin.     

Sedimentological and geochronological constraints on the Carboniferous evolution of central Inner Mongolia,southeastern Central Asian Orogenic Belt: Inland sea deposition in a post-orogenic setting

Sedimentological and geochronological analyses were performed on Carboniferous strata from central Inner Mongolia (China) to determine the tectonic setting of the southeastern Central Asian Orogenic Belt (CAOB). Sedimentological analyses indicate that the widespread Late Carboniferous strata in central Inner Mongolia were dominated by shallow marine clastic-carbonate deposition with basal conglomerate above the Precambrian basement and Early Paleozoic orogenic belts. Based on lithological comparison and fossil similarity, five sedimentary stages were used to represent the Carboniferous deposition. The depositional stages include, from bottom to top, 1) basal molassic, 2) first carbonate platform, 3) terrigenous with coeval intraplate volcanism, 4) second carbonate platform, and 5) post-carbonate terrigenous. These five stages provide evidence for an extensive transgression in central Inner Mongolia during the Late Carboniferous. Detrital zircon geochronological studies from five samples yielded five main age populations: ~ 310 Ma, ~ 350 Ma, 400–450 Ma, 800–1200 Ma and some Meso-Proterozoic to Neoarchean grains. The detrital zircon geochronological studies indicate that the provenances for these Late Carboniferous strata were mainly local magmatic rocks (Early Paleozoic arc magmatic rocks and Carboniferous intrusions) with subordinate input of Precambrian basement. Combining our sedimentological and provenance analyses with previous fossil comparison and paleomagnetic reconstruction, an inland sea was perceived to be the main paleogeographic feature for central Inner Mongolia during the Late Carboniferous. The inland sea developed on a welded continent after the collision between North China Craton and its northern blocks.     

The impact of severe biodegradation on the molecular and stable (C,H, N,S) isotopic compositions of oils in the Alberta Basin,Canada

Although the effects of biodegradation on the composition and physical properties of crude oil have been well studied, effects of in-reservoir petroleum biodegradation on molecular and isotopic compositions of crude oils are not yet clearly understood. The Alberta Basin, in western Canada, is one of the world’s largest petroleum accumulations and constitutes an ideal example of a natural suite of sequentially biodegraded oils. The basin hosts moderately to severely biodegraded petroleum, regionally distributed and in single, more or less continuous, oil columns. In this study, a series of oil samples from the Alberta heavy oil and oil sands provinces, with varying degrees of biodegradation, were analyzed to assess the impact of progressive biodegradation on the molecular and C, H, N, and S isotopic compositions of oils. The results of the molecular characterization of the hydrocarbon fraction of the studied oils show that the oils have suffered biodegradation levels from 2 to 10⁺ (toward the Alberta–Saskatchewan border) on the Peters and Moldowan scale of biodegradation (abbreviated PM 2 to PM 10) and from tens to hundreds on the Manco scale. Within single reservoirs, increasing biodegradation was observed from top to bottom of the oil columns at all sites studied. The whole oil stable isotopic compositions of the samples varied in the ranges δ¹³C = −31.2‰ to −29.0‰, δ²H = −147‰ to −133‰, δ¹⁵N = 0.3–4.7‰ and δ³⁴S = 0.4–6.4‰. The maximum differences between δ values of samples (Δ) within single oil columns were Δ¹³C = 1.4‰, Δ²H = 7‰, Δ¹⁵N = 1.7‰ and Δ³⁴S = 1.0‰. Regional variations in the isotopic compositions of oil samples from different wells (averaged values from top to bottom) were 1.2‰ for δ¹³C, 12‰ for δ²H, 4.1‰ for δ¹⁵N and 5.5‰ for δ³⁴S and hence generally significantly larger variations were seen than variations observed within single oil columns, especially for N and S. It appears that even severe levels of biodegradation do not cause observable systematic variations in carbon, nitrogen or sulfur isotope composition of whole oils. This indicates that sulfur and nitrogen isotopic compositions may be used in very degraded oils as indicators for oil charge from different source rock facies.     

崖城地区渐新统不同沉积相带烃源岩生物标志物组合特征及其烃源意义

基于40余个不同岩性烃源岩及原油饱和烃组分的GC/MS和GC/MS/MS分析资料,揭示了琼东南盆地崖城地区渐新统不同沉积相带烃源岩的生物标志物组合特征,并与崖城油气田原油进行油源精细对比,提出了新的认识。研究结果表明,海岸平原沼泽相煤及碳质泥岩呈姥鲛烷优势(Pr/Ph>5.0),三环萜烷以低碳数化合物为主(C₁₉/C₂₃>3.0),甾烷丰度低(藿烷/甾烷>5.0), C₂₉甾烷优势显著(>60%),指示高等植物为主要的有机源,且沉积于氧化环境。浅海相泥岩中Pr/Ph值大多在1.0~2.5,表征弱还原-弱氧化环境;其三环萜烷以C₂₁或C₂₃为主峰,甾烷呈"V"字型分布,藿烷/甾烷比值小于3.0,具陆源和水生双重有机质生源。煤及碳质泥岩中奥利烷和双杜松烷等陆源标志物均较少,而泥岩中却普遍富含这些化合物,反映了近岸海相沉积有机质的特殊性。因而,在近海盆地地层中奥利烷和双杜松烷丰度并不能代表总体有机质中陆源的输入比例,更可能是指相标志。通过与烃源岩的分子地球化学对比表明,崖城油气田的主体原油兼具煤成烃和泥岩所生油的生物标志物组成,为混源油,来自渐新统不同沉积相带烃源岩。     

Organic geochemistry and depositional environment of the Aptian bituminous limestone in the Kale Gümüşhane area (NE-Turkey): An example of lacustrine deposits on the platform carbonate sequence

The Jurassic–Lower Cretaceous aged carbonate sequence is widely exposed in the southern zone of Eastern Pontides. Aptian black bituminous limestone is found in the upper part of this sequence in the Kale area (Gümüşhane). This limestone contains faunal remains (e.g., gastropod, ostracod, characean stems and miliolid type benthic foraminifera) that indicate a freshwater, lacustrine depositional environment.The total organic carbon (TOC) values of the bituminous limestone samples range from 0.11–1.30% with an average TOC value of 0.54%. The hydrogen index (HI) varies from 119–448 mg HC/g TOC (average HI 298 mg HC/g TOC) indicating that the limestone contains gas prone as well as oil prone organic matter. Pyrolysis data prove that the organic matter content in the bituminous limestone consists of Type II kerogen. The average T_max value for bituminous limestone samples is 438 °C (434–448 °C). Bitumen/TOC ratios for bituminous limestone are 0.05 and 0.04. The T_max values and the ratios indicate that the bituminous limestone samples contain early mature to mature organic matter.Analysis of solvent extracts from the two richest bituminous limestones show a predominance of high carbon number (C₂₆–C₃₀) n-alkanes. The Pr/Ph ratio and CPI value are 1.34 and 0.96, respectively. C₂₉ is the dominant sterane, with C₂₉ > C₂₇ > C₂₈. The bituminous limestone samples have low C₂₂/C₂₁ ratios, high C₂₄/C₂₃ tricyclic terpane ratios and very low C₃₁R/C₃₀ hopane ratios (<0.25). These data are consistent with the bituminous limestones being deposited in a lacustrine environment.     

Applications of Mango’s light hydrocarbon parameters to petroleum from Tarim basin,NW China

Light hydrocarbons in oils from the Tarim basin, NW China, were analyzed by GC. The light hydrocarbon parameters proposed by Mango revealed the distributions of the oils as two main types, marine and terrigenous sources. The Mango parameter K₁ not only displays a remarkable invariance (∼1) in most of the oils, but also shows significant variations (ranging from 1.20 to 1.54) in the oils occurring in the eastern part of the Tazhong Fault Uplift (EPTFU) located in the center of the Tarim basin. This variation of the K₁ value may indicate different petroleum systems in the areas which are superimposed in the EPTFU. Parameter K₂ proposed by Mango shows a significant variation between the two main oil types. The marine oils are characterized by relatively low values of K₂ (average 0.23) and the terrigenous oils by relatively high K₂ values (average 0.35), with general invariance within the same oil set. A plot of (P₃ + P₂ + N₂) vs. $(N_1^6)$ based on the model proposed by Mango can be used not only to discriminate between the two main genetic oils from the Tarim basin, but also to classify the marine oils from the Lunnan area into two sub-types, which may indicate two sub-petroleum systems existing in the area.