Diagenetic alteration of a Mesozoic fluvial gold placer deposit,southern New Zealand

Gold paleoplacers become progressively more affected by diagenetic processes with age and burial. Mesozoic paleoplacer deposits in southern New Zealand display intermediate stages of diagenetic transformation compared to little-affected Late Cenozoic paleoplacers and strongly-affected Paleozoic and Precambrian paleoplacers. The Mesozoic (Cretaceous) diagenesis resulted in near-pervasive alteration, cementation and lithification of the paleoplacer. Lithic clasts and matrix have been extensively altered to illite, ferrous iron-bearing smectite-vermiculite, and kaolinite, and the cement consists mainly of clays and calcite. Diagenetic pyrite, marcasite, vivianite, and Mn oxide also contributed to cementation. Alteration occurred under near-surface (<500 m depth) conditions with groundwater that had circumneutral pH, high alkalinity, and elevated dissolved K, Mg and Ca. Detrital albite remained unaffected by alteration. Detrital gold has been variably dissolved and redeposited, with widespread formation of gold overgrowths on the 1–10 μm scales, with 1–3 wt% Ag. Gold mobility was driven by reduced sulphur complexes in the low redox, high pH diagenetic environment. The overgrowth gold locally contributed to cementation of fine clastic grains, and has intergrown with diagenetic clays and Mn oxide. Post-diagenetic oxidation of the paleoplacer deposit has transformed much of the pyrite to ferric oxyhydroxide and deposited some ferric oxyhydroxide coatings on gold. These oxidation processes have had only minor effects on gold mobility and textures. Hence, the low redox conditions of diagenetic gold mobility were distinctly different from those typically associated with oxidation-related supergene gold mobility. Diagenesis can affect economics of paleoplacer mining by hindering rock disaggregation during processing, coating gold particles with secondary minerals, and increasing the clay content of the deposit, all of which can lower the efficiency of gold recovery.     

Typomorphic features of placer gold of Vagran cluster (the Northern Urals) and search indicators for primary bedrock gold deposits

The Vagran placer cluster is located on the eastern slope of Northern Urals. During > 100 years of gold mining history approximately 40 tons of gold have been extracted from the placer deposits.Bedrocks of the region consist of high metamorphic Upper Proterozoic and Paleozoic terrigeneous, terrigeneous-volcanogenic and igneous rocks. Gold placer deposits are mostly alluvial genesis deposits and of Quaternary to Oligocene (?) age. The alluvial deposits consist of gravel with pebbles, boulders, and sandy clay covered by sandy silt and a soil layer. The thickness of the alluvial sequence is usually 5–10 m and reaches 18 m in the main watercourses of the third order. Nearly all of the alluvial sediments are gold bearing but concentrations of economic importance prevail in the bottom part of the sequence above the bedrock.There are four different types of gold particles: (I) rounded and well-rounded particles of high fineness and homogeneous inner structure, (II) rounded to sub-rounded high fineness particles with a pure gold rim developed over a core, (III) crystallomorphic (idiomorphic) high fineness with a homogeneous inner structure, and (IV) irregular angular and subangular particles of medium fineness with a significant content of Ag (10–40 wt.%) and elevated Hg (up to 1.15 wt.%).The first type is prevalent and comprises up to 65% of the total gold particles; it is uniformly distributed throughout the territory. There are features with initially complicated dendritic and laminar shaped particles which were rounded during transportation. The second and third types have a propensity for zones of the inherited erosion–tectonic depressions. Apparently, types I, II and III are related with orogenic mesothermal gold-sulfide-quartz mineralization; the differences of these types depend on the primary zonation of ore bodies and supergenic transformation of the alloys. They were connected with middle-depth ore bodies of an orogenic gold-sulfide-quartz formation. The fourth type is evident of nearby transportation from primary sources and a short duration of supergenic influence. It is controlled by a zone of NW-SE orientation, diagonal to the main structures of Ural Fold Belt.The plot of Au content vs coefficient of heterogeneity (ratio of the Au content in the core and in the rim of the grains) is the distinguishing factor between the four types of gold grains both by primary hypogenetic characteristics and supergenetic features.No corresponding lode occurrence of gold-sulfide-quartz mineralization has been identified to date in this region. Placer gold concentrations are related to the intermediate hosts of the Mesozoic-Cenozoic surfaces of the Ural peneplain uplift in the Oligocene and eroded in Miocene-Quaternary time. This factor determines the widespread distribution of placer gold in the territory of the Vagran cluster.The large, Carlin-type Vorontsovsk gold deposit is located 60 km south-east from the Vagran area. It has a shallow erosional level, small size of native gold, and its distal location from the placer deposits makes it an unlikely primary source for the Vagran placers. However, mineralization of this type of deposit is noted within the cluster.Gold of the fourth type nearly resembles the gold of the Vorontsovsk deposit and, apparently, the source is related to the same hydrothermal mineralization event. ICP MS analyses of the quartz-sulfide lodes in the floor of gold-bearing valleys revealed a gold content of 2.0–6.9 g/t in the zone of type IV distribution. Therefore, gold of the fourth type can be used as an indicator for the exploration of primary bedrock mineralization. The geological setting and typomorphic features of this placer gold shows that the primary gold mineralization is similar to the Vorontsovsk deposit and within the zone of distribution of the placer gold of the fourth type.     

Texture and chemistry of pyrite at Chah Zard epithermal gold–silver deposit,Iran

Gold mineralization at Chah Zard, Iran, is mostly concentrated in breccia and veins, and is closely associated with pyrite. Optical and scanning electron microscopy-backscattered electron observations indicate four different pyrite types, each characterized by different textures: porous and fractured py1, simple-zoned, oscillatory-rimmed, framboidal and fibrous py2, colloform py3, and inclusion-rich py4. Laser ablation ICP–MS analysis and elemental mapping reveal the presence of invisible gold in all pyrite types. The highest concentrations (161–166 ppm Au) are found in py2 and py4, which correlate with the highest As concentrations (73,000–76,000 ppm). In As-poor grains, Au concentrations decrease by about two orders of magnitude. Copper, Pb, Zn, Te, Sb, and Ag occur with invisible gold, suggesting that at least part of the gold occurs in nanoparticles of sulfosalts of these metals and metalloids. Gold distribution patterns suggest that only negligible Au was originally trapped in py1 from the initial ore fluids. However, most, if not all, Au was transported and deposited during subsequent overprinting hydrothermal fluid flow in overgrowth rims around the margins of the py2 and within microfractures of py4 grains. Oscillatory zonation patterns for Co, Ni, Sb, Cu, Pb, and Ag in pyrite reflect fluctuations in the hydrothermal fluid chemistry. The LA-ICP–MS data reveal that Cu, Pb and Ag show systematic variations between different pyrite types. Thus, Cu/Pb and Pb/Ag ratios in pyrite may provide a potentially powerful exploration vector to epithermal gold mineralization at Chah Zard district and elsewhere.     

The Niassa Gold Belt,northern Mozambique – A segment of a continental-scale Pan-African gold-bearing structure?

The Niassa Gold Belt, in northernmost Mozambique, is hosted in the Txitonga Group, a Neoproterozoic rift sequence overlying Paleoproterozoic crust of the Congo–Tanzania Craton and deformed during the Pan-African Orogeny. The Txitonga Group is made up of greenschist-facies greywacke and schist and is characterized by bimodal, mainly mafic, magmatism. A zircon U–Pb age for a felsic volcanite dates deposition of the sequence at 714 ± 17 Ma. Gold is mined artisanally from alluvial deposits and primary chalcopyrite-pyrite-bearing quartz veins containing up to 19 ppm Au have been analyzed. In the Cagurué and M’Papa gold fields, dominantly N–S trending quartz veins, hosted in metagabbro and schist, are regarded as tension gashes related to regional strike-slip NE–SW-trending Pan-African shear zones. These gold deposits have been classified as mesozonal and metamorphic in origin. Re–Os isotopic data on sulfides suggest two periods of gold deposition for the Cagurué Gold Field. A coarse-crystalline pyrite–chalcopyrite assemblage yields an imprecise Pan-African age of 483 ± 72 Ma, dating deposition of the quartz veins. Remobilization of early-formed sulfides, particularly chalcopyrite, took place at 112 ± 14 Ma, during Lower Cretaceous Gondwana dispersal. The ～483 Ma assemblage yields a chondritic initial ¹⁸⁷Os/¹⁸⁸Os ratio of 0.123 ± 0.058. This implies a juvenile source for the ore fluids, possibly involving the hosting Neoproterozoic metagabbro. The Niassa Gold Belt is situated at the eastern end of a SW–NE trending continental-scale lineament defined by the Mwembeshi Shear Zone and the southern end of a NW–SE trending lineament defined by the Rukwa Shear Zone. We offer a review of gold deposits in Zambia and Tanzania associated with these polyphase lineaments and speculate on their interrelation.     

Primary to re-equilibrated fluids and geochemical signatures for the evolution of the Nagthat siliciclastics in the Tons valley,Lesser Himalaya,India

Medium to coarse-grained Neo-Proterozoic Nagthat siliciclastic rocks form a part of the Krol Formation in the Lesser Himalayan geotectonic zone. Fluid inclusion and geochemical studies have been carried out on the Nagthat siliciclastics from the Tons valley to determine their provenance during the Proterozoic and their recrystallisation during maximum burial to uplift. Fluid inclusion studies have been carried out on detrital, recrystallised quartz grains and quartz overgrowths. Major and trace element analyses of the siliciclastics, the relationships of SiO₂ with various trace elements, and the association of various trace elements with mineral species suggest a granitic source for these siliciclastics. Primary Q1 aqueous brine inclusions and Q3 H₂O–CO₂ fluid with 0.9 gm/cm³ CO₂ density in detrital quartz grains characterised the protolith of the sandstone as granite or metamorphic rocks. H₂O–NaCl fluids participated in the cementation history, temperatures of quartz overgrowth from 198 to 232 °C show the effect of maximum burial. The re-equilibration of the primary fluid due to elevated internal pressure > confining pressure is evident from features like ‘C’ shaped cavities, stretching of the inclusions, their migration, decrepitation clusters, etc. During recrystallisation these inclusions were equilibrated at 187 ° and 235 °C in a restricted fluid of aqueous, moderately saline composition. The observed inclusion morphology is attributed to a decrease in external pressure related to isothermal decompression uplift.     

Young porphyries,old zircons: new constraints on the timing of deformation and gold mineralisation in the Eastern Goldfields from SHRIMP U–Pb zircon dating at the Kanowna Belle Gold Mine,Western Australia

The Kanowna Belle Gold Mine is a Late Archaean orogenic lode-gold deposit hosted by felsic volcaniclastic and intrusive rocks (porphyries) of the Kalgoorlie Terrane, Western Australia. Rare gold occurs in fragments of veins and alteration that form clasts within the Black Flag Group volcaniclastic rocks at the Kanowna Belle mine, indicating that epithermal gold mineralisation accompanied Black Flag Group volcanism. The SHRIMP U–Pb zircon age of the volcaniclastic unit is 2668±9 Ma, and xenocrystic zircons with ∼2.68, 2.70 and 2.71 Ga age groupings are common. The Black Flag Group rocks are faulted by a D1 thrust, and ∼2670 Ma is thus an older limit for regional D1 deformation. Although SHRIMP U–Pb zircon ages of felsic porphyries commonly give the best constraints on the timing of deformation and structurally controlled gold mineralisation, the data are complex and dates from single samples can be ambiguous. Four Porphyry samples from the Kanowna Belle Gold Mine were analysed. Backscattered electron and cathodoluminescence imaging show that most magmatic zircon in the porphyries is either high-U and metamict, or restricted to rims on older xenocrysts that are too narrow to be dated by SHRIMP. Some porphyries appear to have been saturated with zircon at source and contain only xenocrystic zircons. Zircons that are interpreted to be magmatic in a sample of the mineralised Kanowna Belle Porphyry gives a mean age of 2655±6 Ma. The Kanowna Belle Porphyry is cross cut by regional D2 fabrics and ∼2655 Ma is thus the maximum age for regional D2 deformation. This is a maximum age for epigenetic lode-gold mineralisation. The age of resetting of high-U zircon grains (2.63 Ga) and the age of ore-related Pb–Pb galenas (2.63 Ga) serves as an approximate date for lode-gold mineralisation. If the complex zircon history of the felsic porphyries at Kanowna Belle is typical of this suite throughout the Eastern Goldfields Province, it is clear that existing single zircon dates from this Province require reevaluation, backed up by careful backscattered and cathodoluminescence imaging and textural studies.     

Contrasting coeval paragenesis of gold and scheelite in an orogenic hydrothermal system,Macraes mine,New Zealand

The Macraes deposit (> 10 Moz resource) is a Cretaceous orogenic system hosted in the Hyde-Macraes Shear Zone (HMSZ) which was mineralised under lower greenschist facies during later stages of lower greenschist facies metamorphism of host metasedimentary schists. Gold is encapsulated primarily in sulphides that have replaced silicates in ductile shears that are focussed in micaceous rocks. The shears anastomose around structurally competent lenses, and were enhanced by hydrothermal graphite deposition and alteration of albite to muscovite. In contrast, scheelite with minor auriferous sulphides occurs in multigenerational quartz veins that filled fractures in competent lithologies. Hence, scheelite was deposited coevally with gold, from the same hydrothermal fluid, but in different structural settings from most gold at all scales from millimetres to hundreds of metres. Consequentially, there is weak correlation between Au and W at all scales in the deposit. Multigenerational gold and scheelite mineralisation occurred during progressive deformation in the shear zone in two contrasting structural and mineralogical styles in syn-deformationally weakening gold-bearing micaceous shears, and in syn-deformationally hardened competent rocks that became silicified and veined with quartz and scheelite. Hydrothermal fluid flow in the gold-bearing shears occurred at the grain boundary, microshear, and microfracture scales, and was slow (< 1 m/year), continuous, and pervasive. In contrast, vein formation in more competent lithologies was episodic, locally rapid (> hundreds of m/year), and was controlled by fracture permeability. The Au and W enrichment in the Macraes deposit resulted from regional scale metal mobility, driven by coeval recrystallisation in higher-grade (upper greenschist to amphibolite facies) metamorphism that persisted structurally below the Macraes deposit for at least 10 Ma after mineralisation ceased.     

Melting-induced fluid flow during exhumation of gneisses of the Sulu ultrahigh-pressure terrane

Hydrothermally altered rocks are products of fluid–rock interactions, and typically preserve numerous quartz veins that formed as chemical precipitates from fluids that fill up cracks. Thus, quartz veins are the record of the fluid system that involved fracture flow in the direction of changing temperature or pressure. In order to decipher the fluid activity in the Sulu ultrahigh-pressure (UHP) terrane in eastern China, quartz veins together with an adjacent eclogite lens and the host gneiss were studied. In one location a deformed quartz vein is located at the boundary between the host gneiss and the eclogite lens. The amphibolite-facies overprinting of the eclogite lens decreases from the rim to the core of the lens, with fresh eclogite preserved in the core. The foliated biotite gneiss contains felsic veins and residual phengites. Zircon rims from the gneiss are characterized by melt-related signatures with steep HREE patterns, high Hf contents and negative Eu anomalies, and a pool of weighted average ²⁰⁶Pb/²³⁸U analyses reveal an age of 219 ± 3 Ma (2σ), which is younger than the UHP metamorphic age (236 ± 2 Ma, 2σ) recorded by zircons from the eclogite lens. This suggests that the gneiss in the Sulu UHP terrane could have suffered from partial melting due to phengite dehydration during the “hot” exhumation stage.The formation age of the quartz vein (219 ± 2 Ma, 2σ) defined by zircon rims agrees well with the partial melting time (219 ± 3 Ma, 2σ) of the host gneiss. The initial ¹⁷⁶Hf/¹⁷⁷Hf ratios of zircon rims from the quartz vein are obviously lower than zircons from the eclogite lens, but overlap with the coeval zircon domains from the nearby granite dikes produced by partial melting of orthogneiss. These observations suggest that the quartz vein and corresponding fluid flow could be associated with partial melting of the host gneiss. On the other hand, amphibole-bearing and HREE-rich zircon rims from the amphibolite pool an amphibolite-facies metamorphic age of 217 ± 5 Ma (2σ), overlap with the formation age of the quartz vein. This implies that retrogression of the eclogite lens could have been caused by melting-induced fluid flow. Based on the above observations, we speculate that partial melting of the gneiss in the continental subduction-related UHP belt could have induced a significant fluid flow during the exhumation stage, and thus contributed significantly to the extensive retrogression of eclogites in the Sulu UHP terrane.     

Zr-in-rutile thermometry of eclogites from the Karakaya Complex in NW Turkey: Implications for rutile growth during subduction zone metamorphism

Eclogites occur as a tectonic slice within a metabasite-phyllite-marble unit of the Karakaya Complex in northwest Turkey. The high-pressure mineral assemblage in eclogite is mainly composed of garnet + omphacite + glaucophane + epidote + quartz. Trace element characteristics of rutile and Zr-in-rutile temperatures were determined for eclogites from the Karakaya Complex. Core-rim analyses of rutile grains yield remarkable trace element zoning with lower contents of Zr, Nb and Ta in the core than in the rim. The variations in Zr, Nb and Ta can be ascribed to growth zoning rather than diffusion effects. The Nb/Ta and Zr/Hf ratios increase with a decrease in Ta and Hf contents, which could be ascribed to the effect of metamorphic dehydration in subduction zones on rutile Nb/Ta differentiation. The rutile grains from eclogites in the Karakaya Complex are dominated by subchondritic Nb/Ta and Zr/Hf ratios. It can be noted that subchondritic Nb/Ta may record rutile growth from local sinks of aqueous fluids from metamorphic dehydration.The Zr contents of all rutile grains range between 81 and 160 ppm with an average of 123 ppm. The Zr-in-rutile thermometry yields temperatures of 559–604 °C with an average temperature of 585 °C for eclogites from the Karakaya Complex. This average temperature suggests growth temperature of rutile before peak pressure during the subduction. However, some rutile grains have higher Zr contents in the outermost rims compared to the core. Zr-in-rutile temperatures of the rims are about 20 °C higher than those of the cores. This suggests that the outermost rims would have grown from a distinct fluid at higher temperatures than that of the cores. Moreover, Zr contents and calculated temperatures in both inclusion rutile and matrix rutile from eclogites are identical, which suggests that eclogites within the Karakaya Complex belong to the same tectonic slice and underwent similar metamorphic evolution.     

Re–Os isochron ages for arsenopyrite from Carlin-like gold deposits in the Yunnan–Guizhou–Guangxi “golden triangle”, southwestern China

The Yunnan–Guizhou–Guangxi “golden triangle” is considered to be one of the regions hosting Carlin-like gold deposits in China. Gold deposits in this region can be grouped into lode type that are controlled by faults and layer-like type controlled by stratigraphy. Arsenopyrite is one of the major gold-bearing minerals in these deposits. Rhenium–Os isotopic dating of arsenopyrite from the lode type Lannigou and Jinya and the layer-like type Shuiyindong gold deposits yields isochron ages of 204 ± 19 Ma, 206 ± 22 Ma, and 235 ± 33 Ma, respectively. The data suggest that the Carlin-like gold deposits formed in Late Triassic to Early Jurassic, which is clearly earlier than the ca. 100–80 Ma acid to ultra-basic magmatism in this part of southwestern China. The ages are consistent with ore formation during a period of post-collisional lateral transpression, which is similar to that of the Carlin-like gold deposits in western Qinling of China, but quite different from Carlin-type gold deposits in Nevada, U.S.A.     

The world-class Wona-Kona gold deposit,Burkina Faso

The world-class > 4 Moz Wona-Kona gold deposit is hosted within the Paleoproterozoic Birimian Houndé greenstone belt which is the most important gold mineralized belt in the western part of Burkina Faso, with a cumulative reserve of ~ 11 Moz. The mineralization consists of a pervasive silicification with disseminated pyrite–arsenopyrite crosscut by quartz–carbonate veinlets (1 to 10 cm wide) forming a vertical, thick (up to 40 m) and laterally extensive (5 km) northeast trending orebody hosted within a large (200 m wide) shear zone of regional extent. Gold occurs in association with 3 generations of pyrite and 2 generations of arsenopyrite. Free gold, interpreted as the last mineralizing event, occurs as late fracture filling in the pervasive silicification zone.     

The Tasiast deposit,Mauritania

The Tasiast gold deposits are hosted within Mesoarchean rocks of the Aouéouat greenstone belt, Mauritania. The Tasiast Mine consists of two deposits hosted within distinctly different rock types, both situated within the hanging wall of the west-vergent Tasiast thrust. The Piment deposits are hosted within metasedimentary rocks including metaturbidites and banded iron formation where the main mineral association consists of magnetite-quartz-pyrrhotite ± actinolite ± garnet ± biotite. Gold is associated with silica flooding and sulphide replacement of magnetite in the turbidites and in the banded iron formation units. The West Branch deposit is hosted within meta-igneous rocks, mainly diorites and quartz diorites that lie stratigraphically below host rocks of the Piment deposits. Most of the gold mineralisation at West Branch is hosted by quartz–carbonate veins within the sheared and hydrothermally altered meta-diorites that constitute the Greenschist Zone. At Tasiast, gold mineralisation has been defined over a strike length > 10 km and to vertical depths of 740 m. All of the significant mineralised bodies defined to date dip moderately to steeply (45° to 70°) to the east and have a south–southeasterly plunge. Gold deposits on the Tasiast trend are associated with second order shear zones that are splays cutting the hanging wall block of the Tasiast thrust. An age of 2839 ± 36 Ma obtained from the hydrothermal overgrowth on zircons from a quartz vein is interpreted to represent the age of mineralisation.     

Occurrences and distribution of “invisible” precious metals in sulfide deposits from the Edmond hydrothermal field,Central Indian Ridge

Here, we report the first documented occurrences of “invisible” gold and silver in seafloor sulfide deposits from an active hydrothermal system on the Central Indian Ridge. A detailed mineralogical and geochemical study of polymetallic sulfides from the Edmond vent field was conducted in order to identify controls on the distribution of precious metals. Bulk samples (N = 18) contain up to 18.7 ppm Au and 1450 ppm Ag, with average concentrations of 2.3 ppm Au and 218.9 ppm Ag. Among them, several Zn-rich chimney fragments and anhydrite-dominated ore samples have higher contents of precious metals than Fe-Cu-rich massive sulfides and silica-rich hydrothermal precipitates. Native gold grains are mainly associated with sphalerite, anhydrite, barite and Fe-oxyhydroxides. Abundant submicroscopic Au-Ag alloys tend to occur along grain boundaries between Cu-Fe sulfides and tennantite, or close to the rims of Fe-poor sphalerite. In contrast to primary electrum with high Ag/Au ratios, the absence of detectable silver in high-purity gold indicates that secondary Au enrichment has probably occurred after a direct co-precipitation with Zn-rich mineral assemblages upon cooling and mixing of vent fluids with cold seawater. A suite of late-stage Ag-rich phases, including argentotennantite, pearceite and acanthite, occur as crack-filling veinlets and patches in low-temperature fahlores, or as tiny inclusions enclosed by pyrite, chalcopyrite and colloform sphalerite. By using HRTEM combined with HAADF-STEM imaging, we have found out that silver is also present in significant quantities as discrete colloidal nanoparticles in tennantite. Minor native copper is closely associated with altered chalcopyrite, sphalerite and covellite, exhibiting signs of dissolution, recrystallization and reprecipitation. Extensive hydrothermal reworking resulted from a long history of high-temperature venting in this field, together with post-depositional supergene replacement processes (involving oxidation, leaching or coupled dissolution-reprecipitation mechanisms facilitated by a permeable porosity generated in primary Cu-Fe sulfides) are considered to be important for the remobilization and local reconcentration of early-formed precious metals, and may have been responsible for the formation of relatively coarse-grained native gold or silver within recrystallized massive sulfides and chimney debris.     

Trace element zoning of sulfides and quartz at Sheba and Fairview gold mines: Clues to Mesoarchean mineralisation in the Barberton Greenstone Belt,South Africa

The Fairview and Sheba mines are two of the major gold mines in the Paleoarchean Barberton Greenstone Belt of Southern Africa. At these mines, gold is associated with quartz–carbonate ± rutile veins and occurs both as “invisible” gold finely dispersed in sulfides (primarily pyrite and arsenopyrite), and as visible electrum grains hosted in pyrite. Up to approximately 1000 ppm Au are contained in pyrite, and up to approximately 1700 ppm in arsenopyrite. Mapping of trace element distribution in sulfide minerals using electron microprobe and proton probe techniques revealed multiple events of ore formation and Au mineralisation. At Fairview mine, three stages of pyrite formation were identified, the last of which is associated with arsenopyrite, electrum and other sulfide minerals (sphalerite, chalcopyrite, galena, gersdorffite, and Sb-sulfides). At Sheba mine, pyrite was deposited in two stages, and electrum is associated with the second stage. At both mines, the last stage of sulfide formation is the main stage of Au deposition, and is associated with mobilisation of Au, As, Sb, Cu, Zn, and Ni. The host rock composition seems to have affected the composition of pyrite, since higher Ni and Co concentrations (up to 1.4 and 1.6 wt.%, respectively) have been measured in meta-(ultra)mafic host rocks in comparison with chert and metagreywacke. Arsenopyrite is chemically zoned, and has Sb- and S-rich cores and As- and Ni-rich rims. This zoning indicates variations in fluid compositions (decreasing Sb and increasing Ni), and crystallisation conditions (increasing As content for increasing temperature). Geothermometric estimates based on the As content of arsenopyrite (As ≤ 32 at.%) indicate temperatures up to ~ 420 °C for the crystal rims. Petrographic and cathodoluminescence observations of quartz associated with gold mineralisation show only local brittle deformation, and no plastic deformation. This supports the notion that the ore-transporting veins were emplaced late in the deformation history. Variations of cathodoluminescence of quartz are correlated with changing Al contents (Al ≤ 0.16 wt.%), and can be related to fluctuations in the pH of the mineralising fluids.     

Gold losses by cementation and thermal reduction in the gold recovery circuits

In this study, gold losses in a carbon-in-pulp (CIP) cyanidation gold recovery process and potential sources of these losses were investigated. Gold was found in samples from different streams through the CIP-cyanidation process, pointing to incidental losses. Mineralogical studies showed that gold losses occurred in two main forms, either as attached to larger entities or in the form of dendritic precipitates. SEM and EDS studies revealed that iron bearing minerals acted as the major media in cases when gold associations were observed as losses. The highly alkaline pH (≈ 13), elevated process temperature (≈ 145 °C), and high cyanide concentration (≥ 250 ppm) in the elution column along with a fine iron bearing material implied that gold attachment occurred through an electrochemical cementation mechanism. It was anticipated that the presence of iron in the process, which facilitated gold cementation, relied on the oxidative breakdown of the iron bearing minerals in the ore and/or due to the formation of porous iron oxides due to the roasting of iron sulfides in the regeneration kiln. In the elution column some part of the auro–cyanide complexes would remain non-eluted and be discharged into the carbon generation kiln and the carbon generation kiln was another section promoting gold losses. The high temperature condition in the carbon regeneration kiln (> 500 °C) caused thermal reduction of the non-eluted auro–cyanide complexes to metallic gold, leading to the formation of dendritic gold precipitates and their eventual loss.     

Flotation kinetics of a pyritic gold ore

Kinetics of semi-batch flotation behavior of a gold ore from North-Western Quebec, Canada was investigated with respect to fineness of grind (P₈₀). The gold was mostly associated with pyrite in native form as inclusions and was also in contact with pyrite along the boundaries of non-sulphide gangue. Gold recoveries were found to increase from 91.8% to 95.8% as the particles size decreased from an F₈₀ of 205 μm to 53 μm. Data treatment according to the graphical method of kinetic analysis indicated a much better fit to second order kinetics for both gold and pyrite with correlation coefficients higher than 0.998 compared to first order kinetics with correlation coefficients of less than 0.95. Variation and implication of flotation rate constants are discussed with respect to chemical conditions and particle size.     

The evolution of Eastern Tornquist-Paleoasian Ocean and subsequent continental collisions: A case study from the Western Tatra Mountains,Central Western Carpathians (Poland)

The crystalline basement of the Tatra Mountains in the Central Western Carpathians, forms part of the European Variscides and contains fragments of Gondwanan provenance. Metabasite rocks of MORB affinity in the Tatra Mountains are represented by two suites of amphibolites present in two metamorphic units (the Ornak and Goryczkowa Units) intercalated with metapelitic rocks. They are interpreted as relics of ocean crust, with zircon δ¹⁸O_VSMOW values of 4.97–6.96‰. Zircon REE patterns suggest oxidizing to strongly oxidizing conditions in the parent mantle-derived basaltic magma. LA-MC-ICP-MS U-Pb dating of magmatic zircon cores yields a crystallization age of c. 560 Ma, with inherited components at c. 600 Ma, corresponding to the Pannotia break-up event and to the formation of the Eastern Tornquist–Paleoasian Ocean.However, the zircon rims of both suites yield evidence for two different geological histories. Zircon rims from the Ornak amphibolites record two overgrowth phases. The older rims, dated at 387 ± 8 Ma are interpreted as the result of an early stage of Variscan uplift while the younger rims dated at 342 ± 9 Ma are attributed to late Variscan collisional processes. They are characterized by high δ¹⁸O_VSMOW values of 7.34–9.54‰ and are associated with migmatization related to the closure of the Rheic Ocean.Zircon rims from the Goryczkowa amphibolites yield evidence of metamorphism at 512 ± 5 Ma, subsequent Caledonian metamorphism at 447 ± 14 Ma, followed by two stages of Variscan metamorphism at 372 ± 12 Ma and 339 ± 7 Ma, the latter marking the final closure of the Rheic Ocean during late-Variscan collision.The presented data are the first direct dating of ocean crust formation in the eastern prolongation of the Tornquist Ocean, which formed a probable link to the Paleoasian Ocean.     

Mobilization of arsenic from mine tailings through reductive dissolution of goethite influenced by organic cover

Mine tailings at the former Delnite gold mine in northern Ontario were characterized to assess the impact of a biosolids cover on the stability of As species and evaluate options for long-term management of the tailings. Arsenic concentrations in the tailings range from 0.15 to 0.36 wt% distributed among goethite, pyrite and arsenopyrite. Pyrite and arsenopyrite occur as small and liberated particles that are enveloped by goethite in the uncovered tailings and the deeper portions of the biosolids-covered tailings. Sulfide particles in the shallower portions of the biosolids-covered tailings are free of goethite rims. Arsenic occurs predominantly as As⁵⁺ with minor amount of As¹⁻ in the uncovered tailings. Coinciding with the disappearence of goethite rims on sulfide particles, the biosolids-covered tailings have As³⁺ species gradually increasing in proportion towards the cover. Leaching tests indicated that the As concentrations in the leachate gradually increase from less than 0.085 to 13 mg/L and Fe from 28 to 179 mg/L towards the biosolids cover. These are in sheer contrast to the leachate concentrations of less than 0.085 mg/L As and 24–64 mg/L Fe obtained from the uncovered tailings confirming the role of biosolids-influenced reduction and mobilization of As in the form of As³⁺ species. The evidence suggests that reductive dissolution of goethite influenced by the biosolids-cover caused the mobilization of As as As³⁺ species.     

Uraniferous paleoplacers of the Mesoarchean Mahagiri Quartzite,Singhbhum craton,India: Depositional controls,nature and source of > 3.0 Ga detrital uraninites

The quartz-pebble conglomerate (QPC)-hosted detrital uranium mineralization is unique in character in terms of their restricted distribution before 2.2 Ga atmosphere during pre-Great Oxidation Event (pre-GOE). Such QPC paleoplacer deposits over the world are good targets for moderate to high tonnage and low grade uranium deposits and more importantly for their gold content. The Mahagiri Quartzite, dated c. 3.02 Ga for their youngest detrital zircon population, is developed unconformably over the Mesoarchean Singhbhum Granite (3.44 Ga to 3.1 Ga). The Mahagiri Quartzite includes a conglomerate-pebbly sandstone dominated subaerial alluvial fan to coastal braided plain sequence in the lower parts and shallow marine mature quartz arenite in the upper parts. The alluvial fan-braided plain deposits in the lower parts host a number of pyritiferous and uraniferous conglomerate and pebbly sandstone beds. The uraninite grains are rounded to subrounded in outline suggesting mechanical transport and detrital origin. Together with detrital pyrite and uraninite constitute the example of > 3.0 Ga paleoplacer closely comparable to the Witwatersrand Au–U deposits. EPMA and SEM-EDS studies suggest that the uraninite grains are rich in Th (> 4 wt.%), S and REE-Y. Chemical formula calculations from EPMA analyses suggest uraninite grains belong to two populations with different oxidation states as revealed from Y/REE and cation U^4 +: U^6 + [apfu] ratios. The U contents of the detrital uraninite grains from Mahagiri are significantly lower than that of the ideal stoichiometric composition of UO₂. This is mainly due to higher amount of heterovalent cationic substitution by Th, REE, Y, Pb, and Ca in Mahagiri QPC uraninite structures, and partial alteration and metamictization of uraninites. Alteration due to metamictization resulted in elevated concentration of Si, Al, P, and Ca in more altered and metamict uraninite grains. The REE pattern is typically flat with comparable LREE–HREE concentration. The high Th content flat REE-pattern suggests that the uraninitere presents high temperature phases (> 350 °C) and are magmatic in origin. The Mahagiri detrital uraninite grains suggest existence of highly felsic and K-rich (richer than TTG) granodiorite–granite–monzogranite suites (GGM) of rocks older than 3.1 Ga in the Singhbhum craton.     

Geology,geochronology and fluid characteristics of the Pingqiu gold deposit,Southeastern Guizhou Province,China

The junction of the southeastern Guizhou, the southwestern Hunan, and the northern Guangxi regions is located within the southwestern Jiangnan orogen and forms a NE-trending ∼250 km gold belt containing more than 100 gold deposits and occurrences. The Pingqiu gold deposit is one of the numerous lode gold deposits in the southeastern Guizhou district. Gold mineralization is hosted in Neoproterozoic lower greenschist facies metamorphic rocks and controlled by fold-related structures. Vein types present at Pingqiu include bedding-parallel and discordant types, with saddle-reefs and their down limb extensions dominating but with lesser discordant types. The major sulfide minerals are arsenopyrite and pyrite, with minor sphalerite, galena, chalcopyrite, and rare pyrrhotite, marcasite, and tetrahedrite. Much of the gold is μm- to mm-sized grains, and occurs as fracture-controlled isolated grains or filaments in quartz, galena, sphalerite, pyrite, and wallrock.Three types of fluid inclusions are distinguished in hydrothermal minerals. Type 1 aqueous inclusions have homogenization temperatures of 171–396 °C and salinities of 1.4–9.8 wt% NaCl equiv. Type 2 aqueous-carbonic inclusions yield final homogenization temperatures of 187–350 °C, with salinities of 0.2–7.7 wt% NaCl equiv. Type 3 inclusions are carbonic inclusions with variable relative content of CO₂ and CH₄, and minor amounts of N₂ and H₂O. The close association of CO₂-rich inclusions and H₂O-rich inclusions in groups and along the same trail suggests the presence of fluid immiscibility. The calculated δ¹⁸O_H2O values range from 4.3‰ to 8.3‰ and δD_H2O values of fluid inclusions vary from −55.8‰ to −46.9‰. A metamorphic origin is preferred on the basis of geological background and analogies with other similar deposit types.Two ore-related sericite samples yield well-defined ⁴⁰Ar/³⁹Ar plateau ages of 425.7 ± 1.7 Ma and 425.2 ± 1.3 Ma, respectively. These data overlap the duration of the Caledonian gold mineralization along the Jiangnan orogen, and suggest that gold mineralization was post-peak regional metamorphism and occurred during the later stages of the Caledonian orogeny.Overall, the Pingqiu gold deposit displays many of the principal characteristics of the Bendigo gold mines in the western Lachlan Orogen (SE Australia) and the Dufferin gold deposit in the Meguma Terrane (Nova Scotia, Canada) but also some important differences, which may lead to the disparity in gold endowment. However, the structural make-up at deposit scale, and the shallow mining depth at present indicate that the Pingqiu gold deposit may have considerable gold potential at depth.