The Xitieshan volcanic sediment-hosted massive sulfide deposit,North Qaidam,China: Geology,structural deformation and geochronology

The Xitieshan deposit (~ 64 Mt at 4.86% Zn, 4.16% Pb, 58 g/t Ag, and 0.68 g/t Au) is hosted by the Middle to Late Ordovician Tanjianshan Group of the North Qaidam tectonic metallogenic belt, NW China. This belt is characterized by island arc volcanic, ultra-high pressure (UHP) metamorphic and ophiolitic rocks. The Tanjianshan Group constitutes a succession of metamorphosed bimodal volcanic and sedimentary rocks, which are interpreted to have formed on the margin of a back-arc ocean basin between the Qaidam block and the Qilian block.Four stratigraphic units are identified within the Ordovician Tanjianshan Group. From northeast to southwest they are: 1) unit a, or the lower volcanic-sedimentary rocks, comprising bimodal volcanic rocks (unit a-1) and sedimentary rocks (unit a-2) ranging from carbonates to black carbonaceous schist; 2) unit b, or intermediate-mafic volcaniclastic rocks, characterized by intermediate to mafic volcaniclastic rocks intercalated with lamellar carbonaceous schist and minor marble lenses; 3) unit c, a purplish red sandy conglomerate that unconformably overlies unit b, representing the product of the foreland basin sedimentation during the Early Silurian; 4) unit d, or mafic volcanic rocks, from base to up, comprising the lower mafic volcaniclastic rocks (unit d-1), middle clastic sedimentary rocks (unit d-2), upper mafic volcaniclastic rocks (unit d-3), and uppermost mafic volcanic rocks (unit d-4). Unit a-2 hosts most of the massive sulfides whereas unit b contains subordinate amounts.The massive stratiform lenses constitute most of the Xitieshan deposit with significant amount of semi-massive and irregularly-shaped sulfides and minor amounts in stringer veins. Pyrite, galena and sphalerite are the dominant sulfide minerals, with subordinate pyrrhotite and chalcopyrite. Quartz is a dominant gangue mineral. Sericite, quartz, chlorite, and carbonate alteration of host rocks accompanies the mineralization.U-Pb zircon geochronology yields three ages of 454 Ma, 452 Ma and 451 Ma for the footwall felsic volcanic rocks in unit a-1, sedimentary host rocks in unit a-2 and hanging-wall unit b, respectively. The Xitieshan deposit is considered to be coeval with the sedimentation of unit a-2 and unit b of the Tanjianshan Group. The Xitieshan deposit has been intensely deformed during two phases (main ductile shear and minor ductile-brittle deformation). The main ductile shear deformation controls the general strike of the ore zones, whereas minor deformation controls the internal geometry of the ore bodies. ⁴⁰Ar-³⁹Ar age of muscovite from mylonitized granitic gneisses in the ductile shear zone is ~ 399 Ma, which is interpreted to date the Xitieshan ductile shear zone, suggesting that Early Devonian metamorphism and deformation post-dated the Tanjianshan Group.The Xitieshan deposit has many features similar to that of the Bathurst district of Canada, the Iberian Pyrite Belt of Spain, the Wolverine volcanogenic massive sulfide deposit in Canada. Based on its tectonic setting, host-rock types, local geologic setting, metal grades, geochronology, temperatures and salinities of mineralizing fluid and source of sulfur, the Xitieshan deposit has features similar to sedimentary exhalative (SEDEX) and VMS deposits and is similar to volcanic and sediment-hosted massive sulfide (VSHMS) deposits.     

Base and precious metal mineralization in Middle Jurassic rocks of the Lesser Caucasus: A review of geology and metallogeny and new data from the Kapan,Alaverdi and Mehmana districts

The polymetallic Cu–Au–Ag–Zn ± Pb, Cu–Au and Cu deposits in the Kapan, Alaverdi and Mehmana mining districts of Armenia and the Nagorno–Karabakh region form part of the Tethyan belt. They are hosted by Middle Jurassic rocks of the Lesser Caucasus paleo-island arc, which can be divided into the Kapan Zone and the Somkheto–Karabakh Island Arc. Mineralization in Middle Jurassic rocks of this paleo-island arc domain formed during the first of three recognized Mesozoic to Cenozoic metallogenic epochs. The Middle Jurassic to Early Cretaceous metallogenic epoch comprises porphyry Cu, skarn and epithermal deposits related to Late Jurassic and Early Cretaceous intrusions. The second and third metallogenic epochs of the Lesser Caucasus are represented by Late Cretaceous volcanogenic massive sulfide (VMS) deposits with transitional features towards epithermal mineralization and by Eocene to Miocene world-class porphyry Mo–Cu and epithermal precious metal deposits, respectively.The ore deposits in the Kapan, Alaverdi and Mehmana mining districts are poorly understood and previous researchers named them as copper–pyrite, Cu–Au or polymetallic deposits. Different genetic origins were proposed for their formation, including VMS and porphyry-related scenarios. The ore deposits in the Kapan, Alaverdi and Mehmana mining districts are characterized by diverse mineralization styles, which include polymetallic veins, massive stratiform replacement ore bodies at lithological contacts, and stockwork style mineralization. Sericitic, argillic and advanced argillic alteration assemblages are widespread in the deposits which have intermediate to high-sulfidation state mineral parageneses that consist of tennantite–tetrahedrite plus chalcopyrite and enargite–luzonite–colusite, respectively. The ore deposits are spatially associated with differentiated calc-alkaline intrusions and pebble dykes are widespread. Published δ³⁴S values for sulfides and sulfates are in agreement with a magmatic source for the bulk sulfur whereas published δ³⁴S values of sulfate minerals partly overlap with the isotopic composition of contemporaneous seawater. Published mineralization ages demonstrate discrete ore forming pulses from Middle Jurassic to the Late Jurassic–Early Cretaceous boundary, indicating time gaps of 5 to 20 m.y. in between the partly subaqueous deposition of the host rocks and the epigenetic mineralization.Most of the described characteristics indicate an intrusion-related origin for the ore deposits in Middle Jurassic rocks of the Lesser Caucasus, whereas a hybrid VMS–epithermal–porphyry scenario might apply for deposits with both VMS- and intrusion-related features.The volcanic Middle Jurassic host rocks for mineralization and Middle to Late Jurassic intrusive rocks from the Somkheto–Karabakh Island Arc and the Kapan Zone show typical subduction-related calc-alkaline signature. They are enriched in LILE such as K, Rb and Ba and show negative anomalies in HFSE such as Nb and Ta. The ubiquitous presence of amphibole in Middle Jurassic volcanic rocks reflects magmas with high water contents. Flat REE patterns ([La/Yb]_N = 0.89–1.23) indicate a depleted mantle source, and concave-upward (listric-shaped) MREE–HREE patterns ([Dy/Yb]_N = 0.75–1.21) suggest melting from a shallow mantle reservoir. Similar trace element patterns of Middle Jurassic rocks from the Somkheto–Karabakh Island Arc and the Kapan Zone indicate that these two tectonic units form part of one discontinuous segmented arc. Similar petrogenetic and ore-forming processes operated along its axis and Middle Jurassic volcanic and volcanosedimentary rocks constitute the preferential host for polymetallic Cu–Au–Ag–Zn ± Pb, Cu–Au and Cu mineralization, both in the Somkheto–Karabakh Island Arc and the Kapan Zone.     

Geology,U-Pb geochronology,and stable isotope geochemistry of the Tunca semi-massive sulfide mineralization,Black Sea region,NE Turkey: Implications for ore genesis

Upper Cretaceous volcano-sedimentary sequences of the Eastern Pontide orogenic belt, NE Turkey, are host to significant VMS mineralization, including near Tunca. The initial stages of felsic volcanism within the mineralized area are marked by the eruption of dacitic lavas and breccias of the Kızılkaya Formation. This was accompanied by the emplacement of domelike hematitic dacites. Autobrecciated and volcaniclastic rocks, both in situ and resedimented, were likely generated from extrusive portions of these dacite bodies. Basaltic volcanism is marked by the eruption of the lava flows and pillow lavas of the Çağlayan Formation. Hiatuses in basaltic activity are marked by thin horizons of volcaniclastics and mudstones. The uppermost felsic volcanic units were accompanied by resedimentation of autoclastic facies from previous volcanism and represent the latest phase of Upper Cretaceous volcanism in the area. The semi-massive sulfide mineralization is associated with a late stage of the initial felsic volcanism. U-Pb LA-ICP-MS zircon dating of a dacitic tuff breccia yielded an age of 88.1 ± 1.2 Ma (Coniacian-Upper Cretaceous), which is interpreted to be the age of the sulfide occurrences.A concentric zoned alteration pattern is observed in the footwall rocks. The alteration pattern is considered to have formed by lateral migration of hydrothermal fluids which had ascended along the discharge conduit. Fluid inclusion data indicate precipitation or mobilization processes within a relatively narrow temperature range of 152–255 °C (avg. 200 °C). The low-salinity fluids in the fluid inclusions, less than 5.9 wt% NaCl equivalent, are consistent with typical modified seawater-dominant hydrothermal vent fluids. Sulfur isotope analysis of the Tunca sulfides yields a narrow range of 1.5–4.1 per mil. These δ³⁴S values are also typical of many VMS deposits. Most of the recorded δ¹⁸O values (+7.1 to +14.0 per mil) are greater than 9 per mil. The most intensely hydrothermally altered rocks tend to have lower δ¹⁸O values relative to the less altered rocks. Collectively, the geologic relationships, mineralization style, and the lack of seafloor ore facies suggest that mineralization is principally of sub-seafloor origin. The most geologically reasonable interpretation of the genesis of the Tunca mineralization is the continuous interaction between the host rocks and seawater-derived fluids, without significant involvement of a magmatic fluid.     

Indium in cassiterite and ores of tin deposits

The results obtained with LA-ICP-MS by less abundant lighter ¹¹³In isotope and EPMA show that in cassiterite of cassiterite–quartz veins the indium contents do not exceed 160 ppm, while cassiterite from Sn–sulfide veins is characterized by higher indium contents from 40 to 485 ppm; sulfides of Sn–sulfide veins unlike sulfides of cassiterite–quartz veins also have the highest indium contents: Fe-sphalerite (100–25,000 ppm), chalcopyrite (up to 1000 ppm), and stannite (up to 60,000 ppm). Indium contents in the Sn–sulfide ore of the Tigrinoe and Pravourmiiskoe deposits obtained using SR-XRF, ICP-MS and atomic absorption methods range from 10 to 433 ppm with average values of 56–65 ppm. Indium-rich Sn–sulfide mineralization in five large Sn–Ag ore districts of the Far East Russia (Khingansky, Badzhalsky, Komsomolsky, Arminsky, Kavalerovsky) provides the impetus for further exploration of deposits with Sn–sulfide mineralization as the most promising indium resources in Russia. Empirical observations from geology and geochronology of cassiterite–quartz and Sn–sulfide mineralization show that the combined contribution from granite and alkaline–subalkaline mafic sources and multistage ore-forming processes doubled indium resources of deposits being the main factors in the formation of high grade indium mineralization.     

Genesis of the Zhengguang gold deposit in the Duobaoshan ore field,Heilongjiang Province,NE China: Constraints from geology,geochronology and S-Pb isotopic compositions

The Zhengguang gold deposit in the Duobaoshan ore field, hosted in volcanic rocks of the Middle Ordovician Duobaoshan Formation, is one of the largest gold deposits in the Northeastern Great Xing’an Range of the Central Asian Orogenic Belt (CAOB). The deposit comprises the No. I, II and III ore zones with a total resource exceeding 35 tonnes of Au, 100,000 tonnes of Zn and 100 tonnes of Ag. A genetic relationship between gold mineralization and concealed tonalite porphyry is inferred based on the characteristics of cryptoexplosive breccia and hydrothermal alteration indicative of porphyry-type and epithermal mineralization. Zircon LA-ICPMS U-Pb dating reveals that the tonalite porphyry was emplaced at 462.1 ± 1.8 Ma (Middle Ordovician). The δ³⁴S_V-CDT values of sulfide minerals range from −3.0‰ to −1.7‰ with an average of −2.33‰, indicating that sulfur was mainly derived from a magmatic source. The Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb ranging from 17.572 to 17.629, ²⁰⁷Pb/²⁰⁴Pb from 15.424 to 15.486, and ²⁰⁸Pb/²⁰⁴Pb from 37.206 to 37.418) suggest a major mantle component for Pb and, by inference, for other ore metals. Therefore, we suggest that the ore-forming elements in the Zhengguang gold deposit may be related to the mantle-sourced tonalite porphyry. On the basis of the geological characteristics and geochemical signatures documented in this study, we conclude that the Zhengguang gold deposit was formed in a porphyry to epithermal transitional environment associated with the concealed tonalite porphyry, as part of the Duobaoshan porphyry-epithermal ore system that is related to the subduction of the Paleo-Asian Ocean during the Ordovician.     

Likely “mantle plume” activity in the Skellefte district,Northern Sweden. A reexamination of mafic/ultramafic magmatic activity: Its possible association with VMS and gold mineralization

Most attention has been given to the geology of the extensive VMS and subordinate precious metals mineralization in the Skellefte district. Less attention has been given to indications of deep-seated origins of felsic and mafic/ultramafic volcanic rocks; of VMS and precious metals mineralizing fluids; and the primary origins of these metals. A holistic view of the significance of mafic/ultramafic volcanic rocks to both the geotectonic evolution of the area and the existence of its important base and precious metals deposits has never been presented. These subjects are discussed in this investigation.Primitive mantle normalized spider diagrams of rare-earth-elements (REE) distinguish two groups of mafic/ultramafic volcanic rocks, each with distinct geochemical characteristics: a mid-ocean-ridge “MORB”-type, and a geochemically unusual and problematic calc–alkaline–basalt “CAB”-type which is the main subject of this investigation. The “MORB”-type mafic volcanic rocks are mostly older than the Skellefte Group felsic volcanic rocks hosting the VMS deposits, whereas the more primitive “CAB”-type mafic/ultramafic volcanic rocks are mostly younger.A common source for these “CAB”-type, mafic-(MgO wt.% < 14%) and ultramafic-(MgO wt.% > 14%) volcanic rocks is suggested by their similar and distinctive geochemical features. These are near-chondritic (Al-undepleted) Al₂O₃/TiO₂ ratios; moderate to strong high-field-strength-element (HFSE) depletion; light-rare-earth-element (LREE) enrichment and moderate heavy-rare-earth-element (HREE) depletion. They outcrop throughout an area of at least 100 × 100 km. Gold mineralization is spatially associated with ultramafic volcanic rocks.Zr and Hf depletion has been shown to be associated with Al-depletion in mafic/ultramafic volcanic rocks elsewhere, and has been attributed to deep-seated partial melting in ascending mantle plumes. Zr and Hf depletion in “CAB”-type Al-undepleted mafic/ultramafic volcanic rocks is therefore unusual. The solution to this dilemma is suggested to be contamination of an Al-depleted mantle plume by felsic crustal rocks whereby Al-depleted ultramafic magmas become Al-undepleted. It will be argued that this model has the potential to explain previous observations of deep-seated origins; the spatial association of ultramafic volcanic rocks with occurrences of gold mineralization; and even the primary origin of metals in VMS deposits.     

In situ zircon U–Pb dating and O isotopes of the Neoarchean Hongtoushan VMS Cu–Zn deposit in the North China Craton: Implication for the ore genesis

The Hongtoushan volcanogenic massive sulfide (VMS) deposit is the largest Archean Cu–Zn deposit in China, located in the Qingyuan greenstone belt on the northern margin of the North China Craton. The Cu–Zn mineralization was stratigraphically controlled by the interbeds (~ 100 m in thickness) of mafic–felsic volcanic sets and overlain by banded iron layers. However, the relationship between VMS deposits and associated volcanics has not been examined. This study ultimately clarifies the times and sources of the volcanics and mineralization. Based on in situ zircon U–Pb and O isotope on VMS-hosting mafic, felsic volcanic rocks, banded and massive sulfide ores and postmineralization pegmatite vein, we considered that there were two main formation stages for the Qingyuan Cu–Zn deposits; one was exhalative-hydrothermal sedimentation and another was further Cu–Zn enriched by later hydrothermal processes. The timing of the first stage occurred at 2571 ± 6 Ma based on the magmatic zircons in the VMS-hosting mafic volcanic rocks, from which the inherited zircons also indicate the existence of 2.65–3.12 Ga ancient supercrustal rocks in the Qingyuan district. A modern mantle-like δ¹⁸Ozircon value of 5.5 ± 0.1‰ (2SD) for this volcanism was well preserved in the inherited core domains of ore samples. It suggests that the mafic volcanics was most likely sourced from partial melting of juvenile crust, e.g., TTG granites. A large-scale metamorphic or hydrothermal event is documented by the recrystallized zircons in sulfide ores. The timing is tightly constrained by the hydrothermal zircon U–Pb ages. They are 2508 ± 4 Ma for the banded ore, 2507 ± 4 Ma for the massive ore and 2508 ± 2 Ma for the postmineralization pegmatite vein. These indistinguishable ages indicate that the 2507 Ma hydrothermal systems played a significant role in the upgrading of the VMS Cu–Zn orebodies. The weighted δ¹⁸O values of hydrothermal zircons show a successively increasing trend from 6.0 ± 0.1‰ (2σ) for the banded ore, 6.6 ± 0.2‰ (2σ) for the massive ore to 7.3 ± 0.2‰ (2σ) for the later pegmatite vein. This variation might be induced by gradual inputting of the δ¹⁸O-rich oceanic crust and/or oceanic sediment during the hydrothermal cycling system. Considering its modern mantle-like oxygen isotope composition of 2571 Ma volcanism, a submarine volcanic hydrothermal system involving mantle plumes is a preferred setting for the Neoarchean VMS Cu–Zn deposits in the Qingyuan greenstone belt.     

Genesis of the Zinkgruvan stratiform Zn-Pb-Ag deposit and associated dolomite-hosted Cu ore,Bergslagen, Sweden

Zinkgruvan, a major stratiform Zn-Pb-Ag deposit in the Paleoproterozoic Bergslagen region, south-central Sweden, was overprinted by polyphase ductile deformation and high-grade metamorphism (including partial melting of the host succession) during the 1.9–1.8 Ga Svecokarelian orogeny. This complex history of post-ore modification has made classification of the deposit difficult. General consensus exists on a syngenetic-exhalative origin, yet the deposit has been variably classified as a volcanogenic massive sulfide (VMS) deposit, a sediment-hosted Zn (SEDEX) deposit, and a Broken Hill-type (BHT) deposit. Since 2010, stratabound, cobaltiferous and nickeliferous Cu ore, comprising schlieren and impregnations of Cu, Co and Ni sulfide minerals in dolomitic marble, is mined from the stratigraphic footwall to the stratiform Zn-Pb-Ag ore. This ore type has not been fully integrated into any of the existing genetic models. Based on a combination of 1) widespread hematite-staining and oxidizing conditions (Fe₂O₃ > FeO) in the stratigraphic footwall, 2) presence of graphite and reducing conditions (Fe₂O₃ < FeO) in the ore horizon and hangingwall and 3) intense K-feldspar alteration and lack of feldspar-destructive alteration in the stratigraphic footwall, we suggest that both the stratiform Zn-Pb-Ag and the dolomite-hosted Cu ore can be attributed to the ascent and discharge of an oxidized, saline brine at near neutral pH. Interaction of this brine with organic matter below the seafloor, especially within limestone, formed stratabound, disseminated Cu ore, and exhalation of the brine into a reduced environment on the sea floor produced a brine pool from which the regionally extensive (>5 km) Zn-Pb-Ag ore was precipitated.Both ore types are characterized by significant spread in δ³⁴S, with the sulfur in the Cu ore and associate marble-hosted Zn mineralization on average being somewhat heavier (δ³⁴S = −4.7 to +10.5‰, average 3.9‰) than that in the stratiform Zn-Pb-Ag ore (δ³⁴S = −6 to +17‰, average 2.0‰). The ranges in δ³⁴S are significantly larger than those observed in syn-volcanic massive sulfide deposits in Bergslagen, for which simple magmatic/volcanic sulfur sources have been invoked. Mixing of magmatic-volcanic sulfur leached from underlying volcanic rocks and sulfur sourced from abiotic or bacterial sulfate reduction in a mixing zone at the seafloor could explain the range observed at Zinkgruvan.A distinct discontinuity in the stratigraphy, at which key stratigraphic units stop abruptly, is interpreted as a syn-sedimentary fault. Metal zonation in the stratiform ore (decreasing Zn/Pb from distal to proximal) and the spatial distribution of Cu mineralization in underlying dolomitic marble suggest that this fault was a major feeder to the mineralization. Our interpretation of ore-forming fluid composition and a dominant redox trap rather than a pH and/or temperature trap differs from most VMS models, with Selwyn-type SEDEX models, and most BHT models. Zinkgruvan has similarities to both McArthur-type SEDEX deposits and sediment-hosted Cu deposits in terms of the inferred ore fluid chemistry, yet the basinal setting has more similarities to BHT and felsic-bimodal VMS districts. We speculate that besides an oxidized footwall stratigraphy, regionally extensive banded iron formations and limestone horizons in the Bergslagen stratigraphy may have aided in buffering ore-forming brines to oxidized, near-neutral conditions. In terms of fluid chemistry, Zinkgruvan could comprise one of the oldest known manifestations of Zn and Cu ore-forming systems involving oxidized near-neutral brines following oxygenation of the Earth’s atmosphere.     

Re–Os dating of chalcopyrite from selected mineral deposits in the Kalatag district in the eastern Tianshan Orogen,China

The Kalatag Cu–Zn–Au district contains a number of economically important Cu deposits in eastern Tianshan in Xinjiang, NW China. Due to the lack of precise mineralization ages, the metallogenesis of this area has long been a matter of debate. In this study, chalcopyrite Re–Os isotope methods are used to date the South Meiling Cu–Zn and Hongshi Cu deposits in the eastern part of Kalatag area.The South Meiling Cu–Zn deposit is hosted in volcanic-sedimentary rocks of the Late Ordovician to Early Silurian Daliugou Formation. The deposit consists of two parts: a concordant massive sulfide ores and discordant vein-type ores located in the footwall strata. The principal ore minerals are pyrite, chalcopyrite, sphalerite, minor tetrahedrite, galena and pyrrhotite. Gangue minerals include quartz, sericite and barite, and minor chlorite, plagioclase and carbonate minerals. The Hongshi Cu deposit represents a hydrothermal vein system hosted in the mafic volcanic rocks of Daliugou Formation. The orebodies are associated with quartz veins and controlled by subsidiary faults of the Kalatag fault. The ore-forming process can be divided into the early, middle and late stages and is characterized by quartz–pyrite, quartz–chalcopyrite–pyrite and quartz–carbonate–gypsum veins, respectively.Re–Os analyses of chalcopyrite from the South Meiling Cu–Zn deposit yield an isochron age of 434.2 ± 3.9 Ma and initial ¹⁸⁷Os/¹⁸⁸Os ratio of 0.647 ± 0.098 (MSWD = 0.59). Re–Os analyses of chalcopyrite from the Hongshi Cu deposit yield an isochron age of 431.8 ± 2.7 Ma and initial ¹⁸⁷Os/¹⁸⁸Os ratio of − 0.165 ± 0.075 (MSWD = 0.77). Since chalcopyrite is the primary copper mineral, we interpret these isochron ages as the timing of Cu mineralization, based on field geology and petrographic evidence. These results suggest that the Re–Os ages presented here provide, for the first time, a direct constraint on an early Paleozoic Cu mineralization event of the eastern Tianshan Orogen. The high initial ¹⁸⁷Os/¹⁸⁸Os ratios (0.647 ± 0.098) ratio of ~ 434 Ma chalcopyrite from the South Meiling deposit suggest that the metal was sourced from a two end-member mixing of crust and mantle materials. Moreover, we propose that the VMS mineral system and hydrothermal vein system of the Kalatag district were related to the south-dipping subduction of the Kalamaili oceanic plate during the Late Ordovician–Silurian.     

Distal Pb-Zn-Ag veins associated with the world-class Donggou porphyry Mo deposit,southern North China craton

The southern North China craton hosts numerous world-class porphyry Mo and Pb-Zn-Ag vein deposits. Whether or not the Pb-Zn-Ag veins are genetically associated with the porphyry Mo system remains contentious. Here we focus on the genetic relationships between the Sanyuangou Pb-Zn-Ag vein deposit and the world-class Donggou porphyry Mo deposit, and discuss the potential implications from the spatial and temporal relationships between porphyry and vein systems in the southern North China craton.At Sanyuangou, vein-hosted sulfide mineralization mainly comprises pyrite, sphalerite, and galena, with minor chalcopyrite, pyrrhotite, bornite, tetrahedrite, covellite, polybasite and argentite. The mineralization is hosted by a quartz diorite stock, which has a zircon U-Pb age of 1756 ± 9 Ma. However, sericite from alteration selvages of Pb-Zn-Ag sulfide mineralization yields a well-defined ⁴⁰Ar/³⁹Ar plateau age of 115.9 ± 0.9 Ma. Although nominally younger, the sericite ⁴⁰Ar/³⁹Ar age is similar to the age of the nearby Donggou porphyry Mo deposit (zircon U-Pb age of 117.8 ± 0.9; molybdenite Re-Os ages of 117.5 ± 0.8 Ma and 116.4 ± 0.6 Ma). Pyrite from Donggou has elevated contents of Mo and Bi, whereas pyrite from Sanyuangou is enriched in Cu, Zn, Pb, Ag, Au, and As. This trace element pattern is consistent with metal zonation typically observed in porphyry related metallogenic systems. Pyrite grains from Sanyuangou have lead isotopes overlapping those from Donggou (17.273–17.495 vs. 17.328–17.517 for ²⁰⁶Pb/²⁰⁴Pb, 15.431–15.566 vs. 15.408–15.551 for ²⁰⁷Pb/²⁰⁴Pb, and 37.991–38.337 vs. 38.080–38.436 for ²⁰⁸Pb/²⁰⁴Pb). Collectively, the geological, geochronological, and geochemical data support a magmatic-hydrothermal origin for the Sanyuangou Pb-Zn-Ag deposit and confirm that the Pb-Zn-Ag veins and the Donggou Mo deposit form a porphyry-related magmatic-hydrothermal system.Given the widespread Pb-Zn-Ag veins and Mo mineralized porphyries in many districts of the southern North China craton, the model derived from this study has broad implications for further exploration of Mo and Pb-Zn-Ag resources in the area.     

The Eastern Black Sea-type volcanogenic massive sulfide deposits: Geochemistry,zircon U–Pb geochronology and an overview of the geodynamics of ore genesis

The Meso-Cenozoic geodynamic evolution of the eastern Pontides orogenic belt provides a key to evaluate the volcanogenic massive sulfide (VMS) deposits associated with convergent margin tectonics in a Cordilleran-type orogenic belt. Here we present new geological, geochemical and zircon U–Pb geochronological data, and attempt to characterize the metallogeny through a comprehensive overview of the important VMS mineralizations in the belt. The VMS deposits in the northern part of the eastern Pontides orogenic belt occur in two different stratigraphic horizons consisting mainly of felsic volcanic rocks within the late Cretaceous sequence. SHRIMP zircon U–Pb analyses from ore-bearing dacites yield weighted mean ²⁰⁶Pb/²³⁸U ages ranging between 91.1 ± 1.3 and 82.6 ± 1 Ma. The felsic rocks of first and second horizons reveal geochemical characteristics of subduction-related calc-alkaline and shoshonitic magmas, respectively, in continental arcs and represent the immature and mature stages of a late Cretaceous magmatic arc. The nature of the late Cretaceous magmatism in the northern part of the eastern Pontides orogenic belt and the various lithological associations including volcaniclastics, mudstones and sedimentary facies indicate a rift-related environment where dacitic volcanism was predominant. The eastern Pontides VMS deposits are located within the caldera-like depressions and are closely associated with dome-like structures of felsic magmas, with their distribution controlled by fracture systems. Based on a detailed analyses of the geological, geophysical and geodynamic information, we propose that the VMS deposits were generated either in intra arc or near arc region of the eastern Pontides orogenic belt during the southward subduction of the Tethys oceanic lithosphere.     

Zircon and titanite U-Pb dating of the Zhangjiawa iron skarn deposit,Luxi district,North China Craton: Implications for a craton-wide iron skarn mineralization

The North China craton hosts numerous iron skarn deposits containing more than 2600 Mt of iron ores, mostly with an average grade of >45 wt% Fe, which have been among the most important source of high-grade iron ores for the last three decades in China. These deposits typically form clusters and can be roughly divided into the western and eastern belts, which are located in the middle of Trans-North China orogen and to the west of the Tan-Lu fault zone in the eastern part of North China craton, respectively. The western belt mainly consists of the southern Taihang district, as well as the Linfen and Taiyuan ore fields, whereas the eastern belt comprises the Luxi and Xu-Huai districts. The Zhangjiawa deposit in the Luxi district has proven reserves of 290 Mt at an average of 46% Fe (up to >65%). The iron mineralization occurs mainly along contact zones between the Kuangshan dioritic intrusion and middle Ordovician marine carbonate rocks that host numerous evaporite intercalations. Titanite grains from the mineralized skarn are closely intergrown with magnetite and retrograde skarn minerals including chlorite, phlogopite and minor epidote, indicating a hydrothermal origin. The titanite grains have extremely low REE contents and low Th/U ratios, consistent with their precipitation directly from hydrothermal fluids responsible for the iron mineralization. Ten hydrothermal titanite grains yield a weighted mean ²⁰⁶Pb/²³⁸U age of 131.0 ± 3.9 Ma (MSWD = 0.1, 1σ), which is in excellent agreement with a zircon U-Pb age (130 ± 1 Ma) of the ore-related diorite. This age consistency confirms that the iron skarn mineralization is temporally and likely genetically related to the Kuangshan intrusion. Results from this study, when combined with existing isotopic age data, suggest that iron skarn mineralization and associated magmatism throughout both the eastern and western belts took place coevally between 135 and 125 Ma, with a peak at ca. 130 Ma. As such, those deposits may represent the world's only major Phanerozoic iron skarn concentration hosted in Precambrian cratons. The magmatism and associated iron skarn mineralization coincide temporally with the culmination of lithospheric thinning and destruction of the North China craton, implying a causal link between the two.     

Geological setting of the Wassa gold deposit,SW Ghana

Including past production, current indicated and inferred resources, Wassa is a 5 Moz poly-deformed early-orogenic gold deposit located on the eastern flank of the Ashanti Belt, in southwest Ghana. It is hosted by metamorphosed volcanic, intrusive and sedimentary rocks of the Sefwi Group (ca. 2260–2160 Ma). Early mineralization has an Eoeburnean age (2164 ± 22 Ma, Re–Os on pyrite) and is characterized by quartz veins, by a carbonate alteration of the host rocks, and by deformed gold-bearing pyrite. Remobilization of this gold occurred during the late stages of the Eburnean Orogeny (~ 2.1 Ga) and is associated with quartz-carbonate veins with visible gold and euhedral pyrites.     

An Early Cretaceous carbonate replacement origin for the Xinqiao stratabound massive sulfide deposit,Middle-Lower Yangtze Metallogenic Belt,China

Stratabound massive sulfide deposits are widespread along the Middle-Lower Yangtze Metallogenic Belt (MLYMB) and serve as an important copper producer in China. Two contrasting genetic models have been proposed, interpreting the stratabound massive sulfide deposits as a Carboniferous SEDEX protore overprinted by Cretaceous magmatic-hydrothermal system or an Early Cretaceous carbonate replacement deposit. These two contrasting models have been applied to the Xinqiao stratabound Cu-Au sulfide deposit, which is dominated by massive sulfide ores hosted in marine carbonates of the Carboniferous Chuanshan and Huanglong Formations, with minor Cu-Au skarn ores localized in the contact zone between the Cretaceous diorite Jitou stock and the Carboniferous carbonate rocks. New SIMS zircon U-Pb dating suggests that the Jitou stock formed at 138.5 ± 1.1 Ma (2σ, MSWD = 0.6). Pyrite Re-Os dating yields an imprecise date of 142 ± 47 Ma (2σ, MSWD = 7.8). The geochronological data thus constrain the mineralization of the Xinqiao deposit at Early Cretaceous.Fluid inclusions in prograde skarn diopside have homogenization temperatures of 450–600 °C and calculated salinities of 13–58 wt.% NaCl equiv. Quartz from the stratabound ores and pyrite-quartz vein networks beneath the stratabound ores have homogenization temperatures of 290–360 and 200–300 °C, with calculated salinities of 5–12 and 2–10 wt.% NaCl equiv., respectively. Quartz from the skarn ores and veins beneath the stratabound ores have δ¹⁸O values of 12.32 ± 0.55 (2 SD, n = 22) and 15.57 ± 1.92‰ (2 SD, n = 60), respectively, corresponding to calculated δ¹⁸O values of 6.22 ± 1.59 (2σ) and 6.81 ± 2.76‰ (2σ) for the equilibrated ore-forming fluids. The fluid inclusion and oxygen isotope data thus support a magmatic-hydrothermal origin rather than a SEDEX system for the stratabound ores, with the hydrothermal fluids most likely being derived from the Jitou stock or associated concealed intrusion. Results from this study have broad implications for the genesis and exploration of other stratabound massive sulfide deposits along the MLYMB.     

Epithermal deposits in South China: Geology,geochemistry, geochronology and tectonic setting

South China Block (SCB) is the broad area including the Yangtze Craton in the northwest and Huanan Orogen in the southeast. It is an important epithermal metallogenic province in China, containing at least 1 high-sulfidation (HS) and 42 low-sulfidation (LS) Au-Ag ± Cu ± Pb-Zn ± Sb epithermal deposits. Porphyry-type mineralization was recognized in four of the LS deposits, and thus they were regarded as LS–P type. These 43 deposits are mainly located in: (1) the Lower Yangtze River Belt and (2) the Northeastern Jiangnan Orogenic Belt in the Yangtze Craton, (3) the Wuyi-Yunkai Orogenic Belt and (4) the Southeast Coastal Volcanic Belt in the Huanan Orogen. They are mostly located in Mesozoic volcanic basins, especially where the regional faults and their subsidiaries occurred. The host rocks include Jurassic–Cretaceous volcanic-sedimentary rocks, coeval or slightly older subvolcanic, granitoids and breccias, and metamorphic basement rocks. The alteration of the HS epithermal deposit (Zijinshan Cu-Au) zoned from silicic (vuggy quartz), through alunite, to dickite and phyllic alteration zones, from the ore veins outwards. The alteration of the LS deposits is zoned from adularia-chalcedony-bladed calcite (or quartz pseudomorphs after bladed calcite) in ore veins to distal illite-sericite-chlorite-kaolinite assemblages. For those LS–P systems, besides the dominated LS alteration assemblages, phyllic and potassium silicate alteration related to porphyry mineralization were identified. Acid leaching textures and vein, stockwork and breccia structures are common in HS deposit, while the LS epithermal deposits are characterized by open-space filling, crustifications, colloform banding and comb structures. The ore-forming fluids are low-temperature, low-salinity meteoric water-dominated in most epithermal deposits in SCB, with variable input of magmatic water. The ore components were derived from both the deep magma and host rocks, and transported upwards or laterally and precipitated in the fracture systems by fluid boiling, mixing and cooling. Most of the epithermal deposits are formed at depth of < 1.5 km and < 300 °C, with few exceptions containing porphyry-type mineralization, such as the Zhilingtou, Yinshan and Longtoushan deposits. Deep drilling is suggested in these deposits as more epithermal and/or porphyry mineralization could be expected. The mineral systems were formed in Early Yanshanian (180–130 Ma) and Late Yanshanian (120–90 Ma) periods. The Early Yanshanian epithermal ore systems are mainly located in a series of E–W-trending metallogenic belts to the west of the Lishui–Haifeng Fault, which were formed in a syn- or post-collision tectonic setting by the collision between the SCB and its surrounding plates. The Late Yanshanian epithermal deposits are mainly located in Southeast Coastal Volcanic Belt, genetically related to the westward subduction of the paleo-Pacific plate.     

A review of the geological characteristics and mineralization history of iron deposits in the Altay orogenic belt of the Xinjiang,Northwest China

In this review, we describe the geological characteristics and metallogenic–tectonic origin of Fe deposits in the Altay orogenic belt within the Xinjiang region of northwestern China. The Fe deposits are found mainly within three regions (ordered from northwest to southeast): the Ashele, Kelan, and Maizi basins. The principal host rocks for the Fe deposits of the Altay orogenic belt are the Early Devonian Kangbutiebao Formation, the Middle to Late Devonian Altay Formation, with minor occurrences of Lower Carboniferous and Early Paleozoic metamorphosed volcano-sedimentary rocks. The principal mineral-forming element groups of the deposits are Fe, Fe–Cu, Fe–Mn, Fe–P, Fe–Pb–Zn, Fe–Au, and Fe–V–Ti. The Fe deposits are associated with distinct formations, such as volcanic rocks, skarn deposits, pegmatites, granite-related hydrothermal vein mineralization, and mafic pluton-related V–Ti-magnetite deposits. The Fe deposits are most commonly associated with volcanic rocks in the upper Kangbutiebao Formation, in the volcano-sedimentary Kelan Basin, and in skarn deposits at several localities, including the lower Kangbutiebao Formation in the volcano-sedimentary Maizi Basin, and the Altay Formation at Jiaerbasidao–Kekebulake region. Homogenization temperatures of fluid inclusions in the prograde, retrograde and sulfide stages of the skarn type deposit are mainly medium- to high-temperature (cluster between 200 and 500 °C), medium-temperature (cluster between 200 and 340 °C) and low- to medium temperature (cluster between 160 and 300 °C), respectively. Ore fluids in the sedimentation period in the volcano-sedimentary type deposit are characterized by low- to medium temperature (with a peak around 190 °C), low to moderate salinity (3.23 to 22.71 wt.% NaCl equiv). Ore fluids in the pegmatite type deposit are characterized by low- to medium temperature (with a peak at 240 °C), low salinity (with a peak around 9 wt.% NaCl equiv). An analysis of the isotopic data for Fe deposits from the Altay orogenic belt indicates that the sulfur was derived from several sources, including volcanic rocks and granite, as well as bacterial reduction of sulfate from seawater. The present results indicate that different deposit types were derived from various sources. The REE geochemistry of rocks and ores from the Fe deposits in the Altay orogenic belt suggests that the ore-forming materials were derived from mafic volcanic rocks. Based on isotopic age data, the timing of the mineralization can be divided into four broad intervals: Early Devonian (410–384 Ma), Middle Devonian (377 Ma), Early Permian (287–274 Ma), and Early Triassic (c. 244 Ma). The ore-forming processes of the Fe deposits are closely related to volcanic activity and the emplacement of intermediate and felsic intrusions. We conclude that Fe deposits within the Altay orogenic belt developed in a range of tectonic settings, including continental arc, post-collisional extensional settings, and intracontinental settings.     

Compositional variations of several Early Permian magmatic sulfide deposits in the Kalatongke district,southern Altai,western China: With genetic and exploration implications

A Permian magmatic Ni-Cu sulfide deposit cluster occurs in the Kalatongke district in the Southern Chinese Altai Orogenic Belt, western China. These deposits are associated with the mafic units of the Y1, Y2, Y3, Y9 and G21 mafic-intermediate complexes. In this paper we report the first zircon U-Pb ages for the Y3 and G21 intrusions, which are 283.3 ± 1.3 Ma and 281.1 ± 1.5 Ma, respectively. Our new age data confirm that the sulfide-bearing mafic units of the Y1, Y2 (connected with Y1 at depth), Y3, Y9 and G21 intrusions all formed in Early Permian between ∼281 and ∼287 Ma. New and existing petrological-geochemical data show some important regular variations between these deposits. The host lithologies change from olivine-bearing rocks for the Y1-Y2-Y9 deposits to olivine-free rocks such as norite for the Y3 deposit and leucogabbro for the G21 deposit. The olivine Fo contents of the Y1 deposit are up to 82 mol%, which are slightly higher than those of the Y2 deposit (up to 81 mol%) and the Y9 deposit (up to 79 mol%). The average plagioclase An contents of the olivine-bearing Y1-Y2-Y9 deposits are higher than those of the olivine-free Y3-G21 deposits. Among the three deposits (Y1, Y2 and Y3) that occur closely along the same structural lineament, the Ni/Cu ratios of bulk sulfides decrease from the olivine-bearing deposits (Y1 and Y2) to the olivine-free deposit (Y3). The PGE tenors of these deposits (Y1, Y2 and Y3) and the nearby coeval deposits (Y9 and G21) are extremely low, indicating that their parental magmas are severely depleted in PGEs. The variations of PGE tenors within a single deposit as well as among the different deposits are mainly due to variable R factors. The host rocks of these deposits are all characterized by elevated initial ⁸⁷Sr/⁸⁶Sr ratios from 0.7045 to 0.7047, positive εNd values from 4.95 to 6.86, positive εHf values of zircon from 9 to 16, and elevated δ¹⁸O values of zircon from 6.15 to 6.7‰. The isotope data indicate that the parental magmas for these deposits experienced up to ∼15 wt% crustal contamination. The δ³⁴S values of the sulfide minerals from these deposits are from −3.1‰ to 0.4‰, with a peak at −2.2‰, indicating the involvement of crustal sulfur. The isotope data and mineral chemistry together indicate that both olivine fractional crystallization and addition of crustal sulfur played a role in triggering sulfide saturation in the parental magmas for these deposits. Based on higher Ni/Cu ratios of sulfide mineralization in the olivine-bearing intrusions (Y1, Y2, Y9) than in the coeval olivine-free intrusions (Y3, G21), we recommend that Ni exploration in the region focus on the olivine-bearing intrusions that were emplaced in the Early Permian.     

Relative contribution of magmatic and post-magmatic processes in the genesis of the Thompson Mine Ni-Co sulfide ores,Manitoba, Canada

The Ni-Co-(PGE) sulfide deposits of the Thompson Nickel Belt (TNB) in Northern Manitoba, Canada are part of the fifth largest nickel camp in the world based on contained nickel; past production from the TNB deposits is 2500 kt Ni. The Thompson Deposit is located on the eastern and southern flanks of the Thompson Dome structure, which is a re-folded nappe structure formed during collision of the Trans-Hudson Orogen with the Canadian Shield at 1.9–1.7 Ga. The Thompson Deposit is almost entirely hosted by P2 member sulfidic metasedimentary rocks of the Paleoproterozoic Ospwagan Group. Variably serpentinised and altered dunites, peridotites and pyroxenites contain disseminated sulfides and have a spatial association with sediment-hosted Ni sulfides which comprise the bulk of the ore types. These rocks formed from rift-related komatiitic magmas that were emplaced at 1.88 Ga, and subsequently deformed by boudinage, thinning, folding, and stacking.Disseminated sulfide mineralization in the large serpentinised peridotite and dunite intrusions that host the Birchtree and Pipe Ni-Co sulfide deposits typically has 4–6 wt% Ni in 100% sulfide. The disseminated sulfides in the less abundant and much smaller boudinaged serpentinised peridotite and dunite bodies associated with the Thompson Deposit have 7–10 wt% Ni in 100% sulfide. The majority of Thompson Mine sulfides are hosted in the P2 member of the Pipe Formation which is a sulfidic schist developed from a shale prololith; the mineralization in the schist includes both low Ni tenor (<1 wt% Ni in sulfide) and barren sulfide (<200 ppm Ni) and a Ni-enriched sulfide with 1–18 wt% Ni in 100% sulfide. The semi-massive and massive sulfide ores show a similar range in Ni tenor to the metasediment-hosted mineralization, but there are discrete populations with maximum Ni tenors of ∼8, 11 and 13 wt% Ni in 100% sulfide. The variations in Ni tenor are related to the Ni/Co ratio (high Ni/Co correlates with high Ni tenor sulfide) and this relationship is produced by the different Ni/Co ratios in sulfides with a range in proportions of pyrrhotite and pentlandite. Geological models of the ore deposit, host rocks, and sulfide geochemical data in three dimensions reveal that the Thompson Deposit forms an anastomosing domain on the south and east flanks of a first order D3 structure which is the Thompson Dome. In detail, a series of second order doubly-plunging folds on the eastern and southern flank control the geometry of the mineral zones. The position of these folds on the flank of the Thompson Dome is a response to the anisotropy of the host rocks during deformation; ultramafic boudins and layers of massive quartzite in ductile metasedimentary rocks control the geometry of the doubly-plunging F3 structures. The envelope of mineralization is almost entirely contained within the P2 member of the Pipe formation, so the deposit is clearly folded by the first order and second order D3 structures. The sulfides with highest Ni tenor (typically >13 wt% Ni in sulfide) define a systematic trend that mirrors the configuration of the second order doubly-plunging F3 structures on the flanks of the Dome. Although moderate to high Ni tenor mineralization is sometimes localized in fold hinges, more typically the highest Ni tenor mineralization is located on the flanks of the fold structures.There is no indication of the mineralogical and geochemical signatures of sedimentary exhalative or hydrothermal processes in the genesis of the Thompson ores. The primary origin of the mineralization is undoubtedly magmatic and this was a critical stage in the development of economic mineralization. Variations in metal tenor in disseminated sulfides contained in ultramafic rock indicate a higher magma/sulfide ratio in the Thompson parental magma relative to Birchtree and Pipe. The variation in Ni tenor of the semi-massive and massive sulfide broadly supports this conclusion, but the variations in metal tenor in the Thompson ores was likely created partly during deformation. The sequence of rocks was modified by burial and loading of the crust (D2 events) to a peak temperature of 750 °C and pressure of 7.5 kbar. The third major phase of deformation (D3) was a sinistral transpression (D3 event) which generated the dome and basin configuration of the TNB. These conditions allowed for progressive deformation and reformation of pyrrhotite and pentlandite into monosulfide solid solution as pressure and temperature increased; this process is termed sulfide kinesis. Separation of the ductile monosulfide solid solution from granular pentlandite would result in an effective separation of Ni during metamorphism, and the monosulfide solid solution would likely be spread out in the stratigraphy to form a broad halo around the main deposit to produce the low Ni tenor sulfide. Reformation of pentlandite and pyrrhotite after the peak D2 event would explain the broad footprint of the mineral system. The effect of the D3 event at lower pressure and temperature would have been to locally redistribute, deform, and repeat the lenses of sulfide.The understanding of the relationships between petrology, stratigraphy, structure, and geochemistry has assisted in formulating a predictive exploration model that has triggered new discoveries to the north and south of the mine, and provides a framework for understanding ore genesis in deformed terrains and the future exploration of the Thompson Nickel Belt.     

Cenozoic metallogeny of Greece and potential for precious,critical and rare metals exploration

The Cenozoic metallogeny in Greece includes numerous major and minor hydrothermal mineral deposits, associated with the closure of the Western Tethyan Ocean and the collision with the Eurasian continental plate in the Aegean Sea, which started in the Cretaceous and is still ongoing. Mineral deposits formed in four main periods: Oligocene (33–25 Ma), early Miocene (22–19 Ma), middle to late Miocene (14–7 Ma), and Pliocene-Pleistocene (3–1.5 Ma). These metallogenic periods occurred in response to slab-rollback and migration of post-collisional calc-alkaline to shoshonitic magmatism in a back-arc extensional regime from the Rhodopes through the Cyclades, and to arc-related magmatism along the active south Aegean volcanic arc. Invasion of asthenospheric melts into the lower crust occurred due to slab retreat, and were responsible for partial melting of metasomatized lithosphere and lower crustal cumulates. These geodynamic events took place during the collapse of the Hellenic orogen along large detachment faults, which exhumed extensive metamorphic core complexes in mainly two regions, the Rhodopes and the Cyclades. The detachment faults and supra-detachment basins controlled magma emplacement, fluid circulation, and mineralization.The most significant mineralization styles comprise porphyry, epithermal, carbonate-replacement, reduced intrusion-related gold, intrusion-related Mo-W and polymetallic veins. Porphyry and epithermal deposits are commonly associated with extensive hydrothermal alteration halos, whereas in other cases alteration is of restricted development and mainly structurally controlled. Porphyry deposits include Cu-Au-, Cu-Mo-Au-Re, Mo-Re, and Mo-W variants. Epithermal deposits include mostly high- and intermediate-sulfidation (HS and IS) types hosted in volcanic rocks, although sedimentary and metamorphic rock hosted mineralized veins, breccias, and disseminations are also present. The main metal associations are Cu-Au-Ag-Te and Pb-Zn-Au-Ag-Te in HS and IS epithermal deposits, respectively. Major carbonate-replacement deposits in the Kassandra and Lavrion mining districts are rich in Au and Ag, and together with reduced intrusion-related gold systems played a critical role in ancient economies. Finally hundreds of polymetallic veins hosted by metamorphic rocks in the Rhodopes and Cyclades significantly add to the metal endowment of Greece.