Genesis of the Huangshannan high-Ni tenor magmatic sulfide deposit in the Eastern Tianshan,northwest China: Constraints from PGE geochemistry and Os–S isotopes

The Huangshannan magmatic Ni-Cu sulfide deposit is one of a group of Permian magmatic Ni-Cu deposits located in the southern Central Asian Orogenic belt in the Eastern Tianshan, northwest China. It is characterized by elevated Ni tenor (concentrations in recalculated 100% sulfide) in sulfide within ultramafic rocks (9–19 wt%), with values much higher than other deposits in the region. Sulfides of the Huangshannan deposit are composed of pentlandite, chalcopyrite, and pyrrhotite and the host rock is relatively fresh, indicating that the high-Ni tenor is a primary magmatic feature rather than formed by alteration processes. It is shown that sulfides with high-Ni tenor can be generated by sulfide-olivine equilibrium at an oxygen fugacity of QFM +0.5, for magmas containing 450 ppm Ni and 20% olivine. Ores with >10 wt% sulfur have relatively low PGE and Ni tenors compared to other ores, R factor (mass ratio of silicate to sulfide liquid) modeling of Ni indicates that they formed at moderate R values (150–600). Based on this constraint on R values, ores with <10 wt% sulfides in the Huangshannan deposit can be segregated from a similar parental magma with 0.05 ppb Os, 0.023 ppb Ir, and 0.5 ppb Pd at R values between 600 and 3000. This, coupled with the supra-cotectic proportions of sulfide liquid to cumulus silicates in the Huangshannan ores imply mechanical transport and deposition of sulfide liquid in a magma pathway or conduit, in which sulfides must have interacted with large volumes of silicate magma. Platinum and Pd depletion relative to other platinum group elements (PGEs) are observed in fresh and sulfide-rich samples (S > 4.5 wt%). As sulfide-rich samples are also depleted in Cu, and as interstitial sulfides in those samples are physically interconnected at a scale of several cms, the low Pt and Pd anomalies are attributed to solid Pt and Pd phases crystallization and retention with the monosulfide solid solution (MSS) and Cu-rich sulfide liquid percolation during MSS fractionation. This finding indicates that Pt anomalies in sulfide-rich rocks from magmatic Ni-Cu deposits in the Eastern Tianshan are the result of sulfide fractionation rather than a hydrothermal effect. ¹⁸⁷Os/¹⁸⁸Os_(278Ma) values of the lherzolite samples vary from 0.27 to 0.37 and γOs_(278Ma) values vary from 110 to 189, indicating significant magma interaction with crustal sulfides, rich in radiogenic Os. Well constrained γOs values and δ³⁴S values (−0.4 to 0.8‰) indicate that crustal contamination occurred at depth before the arrival of the magma in the Huangshannan chamber. Regionally, deposits with high-Ni tenor have not been reported other than the Huangshannan deposit; however, many intrusions with high-Ni contents in olivine are present in NW China, such as the Erhongwa, Poyi and Poshi intrusions. Those intrusions are capable of forming high-Ni tenor sulfides due to olivine-sulfide-silicate equilibrium and relative high-Ni content in parent magma, making them attractive exploration targets.     

Geochemical constraints on Cu–Fe and Fe skarn deposits in the Edong district,Middle–Lower Yangtze River metallogenic belt,China

Copper and iron skarn deposits are economically important types of skarn deposits throughout the world, especially in China, but the differences between Cu and Fe skarn deposits are poorly constrained. The Edong ore district in southeastern Hubei Province, Middle–Lower Yangtze River metallogenic belt, China, contains numerous Fe and Cu–Fe skarn deposits. In this contribution, variations in skarn mineralogy, mineralization-related intrusions and sulfur isotope values between these Cu–Fe and Fe skarn deposits are discussed.The garnets and pyroxenes of the Cu–Fe and Fe skarn deposits in the Edong ore district share similar compositions, i.e., dominantly andradite (Ad_29–100Gr_0–68) and diopside (Di_54–100Hd_0–38), respectively. This feature indicates that the mineral compositions of skarn silicate mineral assemblages were not the critical controlling factors for variations between the Cu–Fe and Fe skarn deposits. Intrusions associated with skarn Fe deposits in the Edong ore district differ from those Cu–Fe skarn deposits in petrology, geochemistry and Sr–Nd isotope. Intrusions associated with Fe deposits have large variations in their (La/Yb)_N ratios (3.84–24.6) and Eu anomalies (δEu = 0.32–1.65), and have relatively low Sr/Y ratios (4.2–44.0) and high Yb contents (1.20–11.8 ppm), as well as radiogenic Sr–Nd isotopes (εNd(t) = − 12.5 to − 9.2) and (⁸⁷Sr/⁸⁶Sr)_i = 0.7067 to 0.7086. In contrast, intrusions associated with Cu–Fe deposits are characterized by relatively high Sr/Y (35.0–81.3) and (La/Yb)_N (15.0–31.6) ratios, low Yb contents (1.00–1.62 ppm) without obvious Eu anomalies (δEu = 0.67–0.97), as well as (⁸⁷Sr/⁸⁶Sr)_i = 0.7055 to 0.7068 and εNd(t) = − 7.9 to − 3.4. Geochemical evidence indicates a greater contribution from the crust in intrusions associated with Fe skarn deposits than in intrusions associated with Cu–Fe skarn deposits. In the Edong ore district, the sulfides and sulfates in the Cu–Fe skarn deposits have sulfur isotope signatures that differ from those of Fe skarn deposits. The Cu–Fe skarn deposits have a narrow range of δ³⁴S values from − 6.2‰ to + 8.7‰ in sulfides, and + 13.2‰ to + 15.2‰ in anhydrite, while the Fe skarn deposits have a wide range of δ³⁴S values from + 10.3‰ to + 20.0‰ in pyrite and + 18.9‰ to + 30.8‰ in anhydrite. Sulfur isotope data for anhydrite and sedimentary country rocks suggest that the formation of skarns in the Edong district involved the interaction between magmatic fluids and variable amounts of evaporites in host rocks.     

Seawater contribution to polymetallic Ni–Mo–PGE–Au mineralization in Early Cambrian black shales of South China: Evidence from Mo isotope,PGE, trace element,and REE geochemistry

The Early Cambrian black shale sequence of the Niutitang Formation in South China hosts a synsedimentary, organic carbon-rich, polymetallic sulfide layer with extreme metal concentrations, locally mined as polymetallic Ni–Mo–PGE–Au ore. In combination with previously reported data, we present Mo isotope, platinum-group element (PGE), and trace and rare-earth element (REE) data for the polymetallic sulfide ores and host black shales from four mine sites (Dazhuliushui and Maluhe in Guizhou Province, and Sancha and Cili in Hunan Province, respectively), several hundred kilometers apart. The polymetallic sulfide ores have consistently heavy δ^98/95Mo values of 0.94 to 1.38‰ (avg. 1.13 ± 0.14‰, 1σ, n = 11), and the host black shale and phosphorite have slightly more variable δ^98/95Mo values of 0.81‰ to 1.70‰ (n = 14). This latter variation is due to variable paleoenvironmental conditions from suboxic to euxinic, and partly closed-system fractionation in isolated marine sedimentary basins. Both the polymetallic sulfides and host black shales show PGE distribution patterns similar to that of present-day seawater, but different from those of ancient submarine-hydrothermal deposits and modern submarine hydrothermal fluids. The polymetallic sulfide bed has a generally consistent metal enrichment by a factor of 10⁷ compared to present-day seawater. PAAS-normalized REE + Y patterns of the polymetallic sulfide bed are characterized by a remarkably positive Y anomaly, consistent with an origin of the REE predominantly from seawater. Small positive Eu anomalies in some of the sulfide ores could reflect minor hydrothermal components involved. The Mo isotope, PGE, and trace and rare-earth element geochemical data suggest that metals in the polymetallic Ni–Mo–PGE–Au sulfide ore layer were scavenged mostly from Early Cambrian seawater, by both in-situ precipitation and local re-deposition of sulfide clasts.     

Extremely negative and inhomogeneous sulfur isotope signatures in Cretaceous Chilean manto-type Cu–(Ag) deposits,Coastal Range of central Chile

Chilean manto-type (CMT) Cu(–Ag) hydrothermal deposits share a characteristic association of volcano-sedimentary Jurassic to Lower Cretaceous host rocks, style of mineralization, ore and associated mineralogy and geochemistry, with ore grades typically > 1%Cu, that make this family of deposits significant and interesting, both academically and economically. Although often stratabound, geological evidence supports an epigenetic origin for these deposits. We present a detailed stable isotope study of La Serena and Melipilla–Naltahua Lower Cretaceous deposits, central Chile, which reveals extremely negative δ³⁴S values, to − 50‰, which are among the lowest values found in any ore deposit. In addition, the range of δ³⁴S values from sulfides in the two areas is very wide: − 38.3 to − 6.9‰ in La Serena, and − 50.4 to − 0.6‰ in Melipilla–Naltahua. These new data significantly extended the reported range of δ³⁴S data for CMT deposits. Co-existing sulfates range from 7.9 to 14.3‰, and are exclusive to La Serena deposit. The wide sulfide isotopic range occurs at deposit and hand specimen scale, and suggests a polygenic sulfur source for these deposits, where bacteriogenic sulfide dominates. While sulfur isotope data for the bulk of Jurassic CMT deposits, northern Chile, suggests a predominant magmatic source in their origin (mean = − 2.7 ± 1.9‰, 1σ), contributions of a magmatic component is only likely to be involved at Melipilla–Naltahua deposit.The δ¹³C values obtained for calcites associated with the mineralization range from − 20.1 to 0.2‰ also suggesting polygenic carbon sources, with the likely strong involvement of degradation of organic matter and leaching of limestone.Two different genetic models, with involvement of hydrocarbon, are proposed for both areas. For Melipilla–Naltahua, a two-step model can be developed as follows: 1) Framboidal pyrite growth, with very low δ³⁴S, formed by bacterial sulfate reduction in an open system, and with diagenetic degradation of oil-related brines, leaving pyrobitumen. 2) Cu-bearing stage, replacing of framboidal pyrite, inheriting depleted sulfur as low as − 50.4‰, together with sulfides directly precipitated from a hydrothermal fluid with δ³⁴S close to 0‰. For La Serena, a single step model fits best, without framboidal pyrite generation. Cu-bearing sulfides were precipitated mainly in veins where Cu plus base metal-bearing hydrothermal fluids mixed with H₂S generated by bacterial sulfate reduction in the host rocks. Isotopic evidence clearly illustrates that bacterial activity, perhaps enhanced by hydrothermal activity, was fed by hydrocarbon brines and sulfate remobilized from continental evaporites. It is possible that variable ecological conditions led to different extents of isotopic fractionation, adding to the typical sulfur isotopic heterogeneity of such bacterial systems. For both areas, the Cu-bearing stage occurred during the peak to waning stages of the very low-grade metamorphism that affected the Lower Cretaceous sequence.     

Mineral chemistry and H–O–S–Pb isotopic compositions of skarn type copper deposits in the Jiurui district of the Middle-Lower Yangtze River metallogenic belt,Eastern China

The skarn type copper deposits are widespread in the Jiurui district in the Middle-Lower Yangtze River metallogenic belt. This paper reports a detailed study on mineral chemistry, and H, O, S and Pb isotopic compositions on skarn silicate and sulfide minerals in the three major skarn dominant deposits (Wushan, Dongleiwan and Dengjiashan). The Wushan skarn deposit is characterized with prograde garnet-dominated and clinopyroxene limited skarns with average andradite content of 83% and hedenbergite content of 10%, whereas the Dongleiwan and Dengjiashan deposits are featured with retrograde skarn alteration with abundant hydrous minerals such as epidote and chlorite. The garnet and clinopyroxene compositions show 59% andradite and 15% hedenbergite for the Dongleiwan skarns, and 43% and 22% for the Dengjiashan skarns respectively. The pistacite components (Ps value) defined as Fe^3 +/(Fe^3 ++ Al) and Fe^3 +/Fe^2 + value of epidote are 0.12 and 1.63 for the Wushan skarns, 0.30 and 32.73 for the Dongleiwan skarns, and 0.17 and 42.85 for the Dengjiashan skarns. It is suggested that the prograde skarn mineralization in the three deposits was all formed in a relatively oxidizing environment, with the Wushan showing the highest oxidation potential and the Dengjiashan having the least oxidation potential. However, in the retrograde skarns, the Dongleiwan and Dengjiashan deposits show higher oxidation potential than that of Wushan. The three deposits show similar sulfur isotopic compositions of − 2.9 to + 1.4‰ and similar lead isotopic compositions with ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios of 17.900 to 18.205, 15.538 to 15.649 and 38.170 to 39.025, respectively. All the three deposits should have similar magmatic origin for the ore-forming materials based on their S and Pb isotopes. The oxygen isotopic compositions of the prograde and retrograde fluids in the three deposits show some differences, with δ¹⁸O_Fluid values of + 8.13‰ and + 7.81‰ for the Wushan, + 6.47‰ and + 2.33‰ for the Dongleiwan, and + 8.27‰ and + 4.43‰ for the Dengjiashan. But the hydrogen isotopic compositions are similar for the prograde (− 65 to − 31‰) and retrograde (− 64 to − 33‰) fluids. Therefore, the fluid origins and evolution may be different in each deposit. The hydrothermal fluids for the prograde skarns in all three deposits were likely derived from magmatic–hydrothermal sources, but the Dongleiwan and Dengjiashan show a higher proportion of meteoric water input in the retrograde stage. Considering the similar average prograde temperatures (574 to 560 °C) as calculated from coexisting garnet–clinopyroxene pairs, and similar retrograde temperatures (281 to 246 °C) as calculated from chlorite chemistry for the three deposits, we suggest that the trigger for deposition of sulfide ores in the Wushan garnet-dominated skarn deposit was mainly caused by system cooling with temperature drop along with magmatic intrusion and crystallization process. The Dongleiwan and Dengjiashan skarn deposits constitute a well developed retrograde skarn system with abundant epidote, chlorite, quartz and calcite, which probably caused by fluid mixing of high-temperature saline magmatic–hydrothermal fluids with cooler, oxidizing and dilute meteoric water.     

S,Pb, and Sr isotope geochemistry and genesis of Pb–Zn mineralization in the Huangshaping polymetallic ore deposit of southern Hunan Province,China

The Huangshaping Pb–Zn–W–Mo polymetallic deposit, located in southern Hunan Province, China, is one of the largest deposits in the region and is unique for its metals combination of Pb–Zn–W–Mo and the occurrence of significant reserves of all these metals. The deposit contains disseminated scheelite and molybdenite within a skarn zone located between Jurassic granitoids and Carboniferous sedimentary carbonate, and sulfide ores located within distal carbonate-hosted stratiform orebodies. The metals and fluids that formed the W–Mo mineralization were derived from granitoids, as indicated by their close spatial and temporal relationships. However, the source of the Pb–Zn mineralization in this deposit remains controversial.Here, we present new sulfur, lead, and strontium isotope data of sulfide minerals (pyrrhotite, sphalerite, galena, and pyrite) from the Pb–Zn mineralization within the deposit, and these data are compared with those of granitoids and sedimentary carbonate in the Huangshaping deposit, thereby providing insights into the genesis of the Pb–Zn mineralization. These data indicate that the sulfide ores from deep levels in the Huangshaping deposit have lower and more consistent δ³⁴S values (− 96 m level: + 4.4‰ to + 6.6‰, n = 13) than sulfides within the shallow part of the deposit (20 m level: + 8.3‰ to + 16.3‰, n = 19). The δ³⁴S values of deep sulfides are compositionally similar to those of magmatic sulfur within southern Hunan Province, whereas the shallower sulfides most likely contain reduced sulfur derived from evaporite sediments. The sulfide ores in the Huangshaping deposit have initial ⁸⁷Sr/⁸⁶Sr ratios (0.707662–0.709846) that lie between the values of granitoids (0.709654–0.718271) and sedimentary carbonate (0.707484–0.708034) in the Huangshaping deposit, but the ratios decreased with time, indicating that the ore-forming fluids were a combination of magmatic and formation-derived fluids, with the influence of the latter increasing over time. The lead isotopic compositions of sulfide ores do not correlate with sulfide type and define a linear trend in a ²⁰⁷Pb/²⁰⁴Pb vs. ²⁰⁶Pb/²⁰⁴Pb diagram that is distinct from the composition of the disseminated pyrite within sedimentary carbonates and granitoids in the Huangshaping deposit, but is similar to the lead isotopic composition of sulfides within coeval skarn Pb–Zn deposits in southern Hunan Province. In addition, the sulfide ores have old signatures with relative high ²⁰⁷Pb/²⁰⁶Pb ratios, suggesting that the underlying Paleoproterozoic basement within southern Hunan Province may be the source of metals within the Huangshaping deposit.The isotope geochemistry of sulfide ores in the Huangshaping deposit shows a remarkable mixed source of sulfur and ore-forming fluids, and the metals were derived from the basement. These features are not found in representative skarn-type Pb–Zn mineralization located elsewhere. The ore-forming elements (S, Pb, and Zn) from the granitoids made an insignificant contribution to sulfide precipitation in this deposit. However, the emplacement of granitoids did provide large amounts of heat and fluids to the hydrothermal system in this area and extracted metals from the basement rocks, indicating that the Jurassic magmatism associated with the Huangshaping deposit was crucial to the Pb–Zn mineralization.     

The Ordovician igneous rocks with high Sr/Y at the Tongshan porphyry copper deposit,satellite of the Duobaoshan deposit,and their metallogenic role

A strong link between high Sr/Y arc magmas and porphyry Cu–Mo–Au deposits has been recognized in recent years. The Tongshan and Duobaoshan deposits are representative large Cu–Mo–Au deposits in NE China. We report LA–ICP–MS zircon U–Pb crystallization age of 471.5 ± 1.3 Ma for Tongshan ore-related granitoid. Re–Os isotopic analyses of the two chalcopyrite samples from Tongshan deposit show a model age range of 470.2–477.1 Ma. The Duobaoshan and Tongshan ore-related granitoids show higher Sr/Y and La/Yb ratios. The δ³⁴S values of sulphides from the Duobaoshan and Tongshan deposits vary from −2.3‰ to 0.0‰, belonging to a magmatic-hydrothermal system. The Pb isotopic ratios of the sulphides from the Duobaoshan and Tongshan deposit range from 17.201 to 18.453 for ²⁰⁶Pb/²⁰⁴Pb, 15.445 to 15.551 for ²⁰⁷Pb/²⁰⁴Pb, and 36.974 to 37.999 for ²⁰⁸Pb/²⁰⁴Pb, indicating the addition of lower crustal material. The Duobaoshan and Tongshan granitoids were formed in a subduction-related continental arc setting, produced by partial melting of juvenile hydrous basalts underplating the deep continental crust during the Ordovician.     

Geochronology,petrology and geochemistry of the Beiligaimiao magmatic sulfide deposit in a Paleozoic active continental margin,North China

The Beiligaimiao magmatic Ni-Cu sulfide deposit is located in the northern rim of the North China Block, which was an active continental margin related to the southward subduction of the Paleo-Asian oceanic plate to the north in the Paleozoic. This deposit has never been studied before but is an excellent example of sulfide mineralization in arc settings that have been commonly overlooked by exploration geologists worldwide. Sulfide mineralization in the deposit is hosted in a mafic-ultramafic complex that consists of a small ultramafic body surrounded by an older and much larger gabbroic intrusion. Disseminated sulfide zones are present in both intrusive bodies but only those close to the surface within the ultramafic body have been mined in the past. The sulfide-mineralized ultramafic body is composed of olivine websterite and orthopyroxenite with a gradational contact between them. SIMS U-Pb dating of zircon crystals from a large olivine websterite sample yields a crystallization age of 269.4 ± 2.1 Ma, which is ∼25 Ma younger than the Erbutu subduction-related magmatic Ni-Cu sulfide deposit that occurs ∼50 km to the north. Orthopyroxene crystals in the Beiligaimiao ultramafic rocks have Mg^# [100 Mg/(Mg + Fe), molar] of 77–78, significantly lower than those in the ultramafic rocks of the Erbutu deposit. Olivine crystals in the Beiligaimiao ultramafic rocks have forsterite (Fo) contents from 72 to 75 mol%, which are also significantly lower than those in the ultramafic rocks of the Erbutu deposit (Fo, 86–88 mol%). The mineral chemical data indicate a more fractionated parental magma for the former. Ca-depletion in olivine (i.e., <1000 ppm Ca), which is common for ultramafic cumulates in arc settings worldwide, is present in both deposits. Like Erbutu, the host rocks of the Beiligaimiao deposit are characterized by enrichments in light rare earth elements (REE) relative to heavy REE and pronounced negative Nb-Ta anomalies, consistent with ultramafic rocks in arc settings. The δ³⁴S values of sulfide separates from the Beiligaimiao deposit are 1.7 to 2.5‰, significantly lower than those for the Erbutu deposit but still slightly higher than the MORB value (−1.5 to 0.5‰). Olivine websterites in the Beiligaimiao deposit have ε_Nd from −8.9 to −9.5 and (⁸⁷Sr/⁸⁶Sr)_i close to 0.7075, which are similar to those of an enriched lithospheric mantle. An orthopyroxenite sample from the deposit has much lower ε_Nd (−12.6) coupled with much higher (⁸⁷Sr/⁸⁶Sr)_i ratio (0.7132), indicating ∼25% crustal contamination. The Sr-Nd-S isotope data support the premise that both crustal contamination and addition of crustal sulfur played a role in triggering sulfur saturation in the parental magma of the Beiligaimiao deposit. Since the immediate country rocks are exclusively gabbros, these processes likely took place at depth. The close temporal and spatial association of the Beiligaimiao and Erbutu deposits points to the possibility that more Permian arc-type magmatic sulfide deposits are yet to be discovered in the region.     

An Early Cretaceous carbonate replacement origin for the Xinqiao stratabound massive sulfide deposit,Middle-Lower Yangtze Metallogenic Belt,China

Stratabound massive sulfide deposits are widespread along the Middle-Lower Yangtze Metallogenic Belt (MLYMB) and serve as an important copper producer in China. Two contrasting genetic models have been proposed, interpreting the stratabound massive sulfide deposits as a Carboniferous SEDEX protore overprinted by Cretaceous magmatic-hydrothermal system or an Early Cretaceous carbonate replacement deposit. These two contrasting models have been applied to the Xinqiao stratabound Cu-Au sulfide deposit, which is dominated by massive sulfide ores hosted in marine carbonates of the Carboniferous Chuanshan and Huanglong Formations, with minor Cu-Au skarn ores localized in the contact zone between the Cretaceous diorite Jitou stock and the Carboniferous carbonate rocks. New SIMS zircon U-Pb dating suggests that the Jitou stock formed at 138.5 ± 1.1 Ma (2σ, MSWD = 0.6). Pyrite Re-Os dating yields an imprecise date of 142 ± 47 Ma (2σ, MSWD = 7.8). The geochronological data thus constrain the mineralization of the Xinqiao deposit at Early Cretaceous.Fluid inclusions in prograde skarn diopside have homogenization temperatures of 450–600 °C and calculated salinities of 13–58 wt.% NaCl equiv. Quartz from the stratabound ores and pyrite-quartz vein networks beneath the stratabound ores have homogenization temperatures of 290–360 and 200–300 °C, with calculated salinities of 5–12 and 2–10 wt.% NaCl equiv., respectively. Quartz from the skarn ores and veins beneath the stratabound ores have δ¹⁸O values of 12.32 ± 0.55 (2 SD, n = 22) and 15.57 ± 1.92‰ (2 SD, n = 60), respectively, corresponding to calculated δ¹⁸O values of 6.22 ± 1.59 (2σ) and 6.81 ± 2.76‰ (2σ) for the equilibrated ore-forming fluids. The fluid inclusion and oxygen isotope data thus support a magmatic-hydrothermal origin rather than a SEDEX system for the stratabound ores, with the hydrothermal fluids most likely being derived from the Jitou stock or associated concealed intrusion. Results from this study have broad implications for the genesis and exploration of other stratabound massive sulfide deposits along the MLYMB.     

Nickel sulfide deposits in Australia: Characteristics,resources, and potential

Australia's nickel sulfide industry has had a fluctuating history since the discovery in 1966 of massive sulfides at Kambalda in the Eastern Goldfields of Western Australia. Periods of buoyant nickel prices and high demand, speculative exploration, and frenetic investment (the ‘nickel boom’ years) have been interspersed by protracted periods of relatively depressed metal prices, exploration inactivity, and low discovery rates. Despite this unpredictable evolution, the industry has had a significant impact on the world nickel scene with Australia having a global resource of nickel metal from sulfide ores of ∼ 12.9 Mt, five world-class deposits (> 1 Mt contained Ni), and a production status of number three after Russia and Canada. More than 90% of the nation's known global resources of nickel metal from sulfide sources were discovered during the relative short period of 1966 to 1973. Australia's nickel sulfide deposits are associated with ultramafic and/or mafic igneous rocks in three major geotectonic settings: (1) Archean komatiites emplaced in rift zones of granite–greenstone belts; (2) Precambrian tholeiitic mafic–ultramafic intrusions emplaced in rift zones of Archean cratons and Proterozoic orogens; and (3) hydrothermal-remobilized deposits of various ages and settings. The komatiitic association is economically by far the most important, accounting for more than 95% of the nation's identified nickel sulfide resources. The ages of Australian komatiitic- and tholeiitic-hosted deposits generally correlate with three major global-scale nickel-metallogenic events at ∼ 3000 Ma, ∼ 2700 Ma, and ∼ 1900 Ma. These events are interpreted to correspond to periods of juvenile crustal growth and the development of large volumes of primitive komatiitic and tholeiitic magmas caused by large-scale mantle overturn and mantle plume activities. There is considerable potential for the further discovery of komatiite-hosted deposits in Archean granite–greenstone terranes including both large, and smaller high-grade (5 to 9% Ni) deposits, that may be enriched in PGEs (2 to 5 g/t), especially where the host ultramafic sequences are poorly exposed.Analysis of the major komatiite provinces of the world reveals that fertile komatiitic sequences are generally of late Archean (∼ 2700 Ma) or Paleoproterozoic (∼ 1900 Ma) age, have dominantly Al-undepleted (Al₂O₃/TiO₂ = 15 to 25) chemical affinities, and often occur with sulfur-bearing country rocks in dynamic high-magma-flux environments, such as compound sheet flows with internal pathways facies (Kambalda-type) or dunitic compound sheet flow facies (Mt Keith-type). Most Precambrian provinces in Australia, particularly the Proterozoic orogenic belts, contain an abundance of sulfur-saturated tholeiitic mafic ± ultramafic intrusions that have not been fully investigated for their potential to host basal Ni–Cu sulfides (Voisey's Bay-type mineralization). The major exploration challenges for finding these deposits are to determine the pre-deformational geometries and younging directions of the intrusions, and to locate structural depressions in the basal contacts and feeder conduits under cover. Stratabound PGE–Ni–Cu ± Cr deposits hosted by large Archean–Proterozoic layered mafic–ultramafic intrusions (Munni Munni, Panton) of tholeiitic affinity have comparable global nickel resources to many komatiite deposits, but low-grades (< 0.2% Ni). There are also hydrothermal nickel sulfide deposits, including the unusual Avebury deposit in western Tasmania, and some potential for ‘Noril'sk-type’ Ni–Cu–PGE deposits associated with major flood basaltic provinces in western and northern Australia.     

Geology,geochronology and fluid characteristics of the Pingqiu gold deposit,Southeastern Guizhou Province,China

The junction of the southeastern Guizhou, the southwestern Hunan, and the northern Guangxi regions is located within the southwestern Jiangnan orogen and forms a NE-trending ∼250 km gold belt containing more than 100 gold deposits and occurrences. The Pingqiu gold deposit is one of the numerous lode gold deposits in the southeastern Guizhou district. Gold mineralization is hosted in Neoproterozoic lower greenschist facies metamorphic rocks and controlled by fold-related structures. Vein types present at Pingqiu include bedding-parallel and discordant types, with saddle-reefs and their down limb extensions dominating but with lesser discordant types. The major sulfide minerals are arsenopyrite and pyrite, with minor sphalerite, galena, chalcopyrite, and rare pyrrhotite, marcasite, and tetrahedrite. Much of the gold is μm- to mm-sized grains, and occurs as fracture-controlled isolated grains or filaments in quartz, galena, sphalerite, pyrite, and wallrock.Three types of fluid inclusions are distinguished in hydrothermal minerals. Type 1 aqueous inclusions have homogenization temperatures of 171–396 °C and salinities of 1.4–9.8 wt% NaCl equiv. Type 2 aqueous-carbonic inclusions yield final homogenization temperatures of 187–350 °C, with salinities of 0.2–7.7 wt% NaCl equiv. Type 3 inclusions are carbonic inclusions with variable relative content of CO₂ and CH₄, and minor amounts of N₂ and H₂O. The close association of CO₂-rich inclusions and H₂O-rich inclusions in groups and along the same trail suggests the presence of fluid immiscibility. The calculated δ¹⁸O_H2O values range from 4.3‰ to 8.3‰ and δD_H2O values of fluid inclusions vary from −55.8‰ to −46.9‰. A metamorphic origin is preferred on the basis of geological background and analogies with other similar deposit types.Two ore-related sericite samples yield well-defined ⁴⁰Ar/³⁹Ar plateau ages of 425.7 ± 1.7 Ma and 425.2 ± 1.3 Ma, respectively. These data overlap the duration of the Caledonian gold mineralization along the Jiangnan orogen, and suggest that gold mineralization was post-peak regional metamorphism and occurred during the later stages of the Caledonian orogeny.Overall, the Pingqiu gold deposit displays many of the principal characteristics of the Bendigo gold mines in the western Lachlan Orogen (SE Australia) and the Dufferin gold deposit in the Meguma Terrane (Nova Scotia, Canada) but also some important differences, which may lead to the disparity in gold endowment. However, the structural make-up at deposit scale, and the shallow mining depth at present indicate that the Pingqiu gold deposit may have considerable gold potential at depth.     

Genesis of the Zinkgruvan stratiform Zn-Pb-Ag deposit and associated dolomite-hosted Cu ore,Bergslagen, Sweden

Zinkgruvan, a major stratiform Zn-Pb-Ag deposit in the Paleoproterozoic Bergslagen region, south-central Sweden, was overprinted by polyphase ductile deformation and high-grade metamorphism (including partial melting of the host succession) during the 1.9–1.8 Ga Svecokarelian orogeny. This complex history of post-ore modification has made classification of the deposit difficult. General consensus exists on a syngenetic-exhalative origin, yet the deposit has been variably classified as a volcanogenic massive sulfide (VMS) deposit, a sediment-hosted Zn (SEDEX) deposit, and a Broken Hill-type (BHT) deposit. Since 2010, stratabound, cobaltiferous and nickeliferous Cu ore, comprising schlieren and impregnations of Cu, Co and Ni sulfide minerals in dolomitic marble, is mined from the stratigraphic footwall to the stratiform Zn-Pb-Ag ore. This ore type has not been fully integrated into any of the existing genetic models. Based on a combination of 1) widespread hematite-staining and oxidizing conditions (Fe₂O₃ > FeO) in the stratigraphic footwall, 2) presence of graphite and reducing conditions (Fe₂O₃ < FeO) in the ore horizon and hangingwall and 3) intense K-feldspar alteration and lack of feldspar-destructive alteration in the stratigraphic footwall, we suggest that both the stratiform Zn-Pb-Ag and the dolomite-hosted Cu ore can be attributed to the ascent and discharge of an oxidized, saline brine at near neutral pH. Interaction of this brine with organic matter below the seafloor, especially within limestone, formed stratabound, disseminated Cu ore, and exhalation of the brine into a reduced environment on the sea floor produced a brine pool from which the regionally extensive (>5 km) Zn-Pb-Ag ore was precipitated.Both ore types are characterized by significant spread in δ³⁴S, with the sulfur in the Cu ore and associate marble-hosted Zn mineralization on average being somewhat heavier (δ³⁴S = −4.7 to +10.5‰, average 3.9‰) than that in the stratiform Zn-Pb-Ag ore (δ³⁴S = −6 to +17‰, average 2.0‰). The ranges in δ³⁴S are significantly larger than those observed in syn-volcanic massive sulfide deposits in Bergslagen, for which simple magmatic/volcanic sulfur sources have been invoked. Mixing of magmatic-volcanic sulfur leached from underlying volcanic rocks and sulfur sourced from abiotic or bacterial sulfate reduction in a mixing zone at the seafloor could explain the range observed at Zinkgruvan.A distinct discontinuity in the stratigraphy, at which key stratigraphic units stop abruptly, is interpreted as a syn-sedimentary fault. Metal zonation in the stratiform ore (decreasing Zn/Pb from distal to proximal) and the spatial distribution of Cu mineralization in underlying dolomitic marble suggest that this fault was a major feeder to the mineralization. Our interpretation of ore-forming fluid composition and a dominant redox trap rather than a pH and/or temperature trap differs from most VMS models, with Selwyn-type SEDEX models, and most BHT models. Zinkgruvan has similarities to both McArthur-type SEDEX deposits and sediment-hosted Cu deposits in terms of the inferred ore fluid chemistry, yet the basinal setting has more similarities to BHT and felsic-bimodal VMS districts. We speculate that besides an oxidized footwall stratigraphy, regionally extensive banded iron formations and limestone horizons in the Bergslagen stratigraphy may have aided in buffering ore-forming brines to oxidized, near-neutral conditions. In terms of fluid chemistry, Zinkgruvan could comprise one of the oldest known manifestations of Zn and Cu ore-forming systems involving oxidized near-neutral brines following oxygenation of the Earth’s atmosphere.     

Geology,geochemistry and genesis of the Qianfanling quartz-vein Mo deposit in Songxian County,Western Henan Province,China

The Qianfanling Mo deposit, located in Songxian County, western Henan province, China, is one of the newly discovered quartz-vein type Mo deposits in the East Qinling–Dabie orogenic belt. The deposit consists of molybdenite in quartz veins and disseminated molybdenite in the wall rocks. The alteration types of the wall rocks include silicification, K-feldspar alteration, pyritization, carbonatization, sericitization, epidotization and chloritization. On the basis of field evidence and petrographic analysis, three stages of hydrothermal mineralization could be distinguished: (1) pyrite–barite–quartz stage; (2) molybdenite–quartz stage; (3) quartz–calcite stage.Two types of fluid inclusions, including CO₂-bearing fluid inclusions and water-rich fluid inclusions, have been recognized in quartz. Homogenization temperatures of fluid inclusions vary from 133 °C to 397 °C. Salinity ranges from 1.57 to 31.61 wt.% NaCl eq. There are a large number of daughter mineral-CO₂-bearing inclusions, which is the result of fluid immiscibility. The ore-forming fluids are medium–high temperature, low to moderate salinity H₂O–NaCl–CO₂ system. The δ³⁴S values of pyrite, molybdenite, and barite range from − 9.3‰ to − 7.3‰, − 9.7‰ to − 7.3‰ and 5.9‰ to 6.8‰, respectively. The δ¹⁸O values of quartz range from 9.8‰ to 11.1‰, with corresponding δ¹⁸O_fluid values of 1.3‰ to 4.3‰, and δ¹⁸D values of fluid inclusions of between − 81‰ and − 64‰. The δ¹³C_V-PDB values of fluid inclusions in quartz and calcite have ranges of − 6.7‰ to − 2.9‰ and − 5.7‰ to − 1.8‰, respectively. Sulfur, hydrogen, oxygen and carbon isotope compositions show that the sulfur and ore-forming fluids derived from a deep-seated igneous source. During the peak collisional period between the North China Craton and the Yangtze Craton, the ore-forming fluids that derived from a deep igneous source extracted base and precious metals and flowed upwards through the channels that formed during tectonism. Fluid immiscibility and volatile exsolution led to the crystallization of molybdenite and other minerals, and the formation of economic orebodies in the Qianfanling Mo deposit.     

Geology,geochemistry and age of the Hukeng tungsten deposit,Southern China

The Hukeng tungsten deposit, located in the Wugongshan area in central part of Jiangxi province, South China, is a large-scale quartz-vein wolframite deposit. It is hosted in the Hukeng granitic intrusion. Based on the mineral assemblage and crosscutting relationship of the veins, three mineralization stages are identified, including: (1) quartz–wolframite stage, (2) quartz–fluorite–wolframite stage, and (3) quartz–pyrite–sphalerite–wolframite stage.The homogenization temperatures of fluid inclusions in vein quartz vary from 220 to 320 °C, and the salinities are from 0 to 10 wt.% NaCl equiv.; corresponding densities range from 0.7 to 1 g/cm³. These features indicated that the ore-forming fluids in the Hukeng tungsten deposit have medium temperature, low density and low salinity.The δ¹⁸OSMOW values of quartz range from 10.8‰ to 14.4‰, with corresponding δ¹⁸O_fluid values of 3.7‰ to 7.7‰, and δD values of fluid inclusions of between ? 70‰ and ? 55‰. The combined isotopic data indicate that the ore-forming fluids of the Hukeng tungsten deposit were mainly derived from magmatic water, with some minor input from meteoric water.We have carried out molybdenite Re–Os and muscovite ⁴⁰Ar/³⁹Ar dating to constrain the timing of mineralization. Re–Os dating of six molybdenite samples yielded model ages ranging from 149.1 ± 2.0 to 150.7 ± 3.7 Ma, with an average of 150.0 Ma. The Re–Os analyses give a well-defined ¹⁸⁷Re/¹⁸⁷Os isochron with an age of 150.2 ± 2.2 Ma (MSWD = 0.60). Hydrothermal muscovite yields a plateau ⁴⁰Ar/³⁹Ar age of 147.2 ± 1.4 Ma. ⁴⁰Ar/³⁹Ar age is in good agreement with the Re–Os age. These ages show that the timing of tungsten mineralization occurred at about 150 Ma. Our new data, when combined with published geochronological results from the other major deposits in this region, suggest that widespread W mineralization occurred in the Late Jurassic throughout South China.     

Sulfur and lead isotopic compositions of massive sulfides from deep-sea hydrothermal systems: Implications for ore genesis and fluid circulation

Studies of sulfur and lead isotopic compositions in hydrothermal deposits are an important tool to determine the source and processes of both sulfur and lead, and to understand the origin of hydrothermal ore deposits. Here, the sulfur and lead isotopic compositions of sulfide minerals have been studied for different hydrothermal fields in the East Pacific Rise (EPR), Mid-Atlantic Ridge (MAR), Central Indian Ridge (CIR), Southwest Indian Ridge (SWIR), and North Fiji Basin (NFB). The sulfur isotopic compositions of the studied sulfide samples are variable (δ³⁴S 0.0 to 9.6‰, avg. δ³⁴S 4.7‰; n = 60), being close to the associated igneous rocks (~ 0‰ for, e.g., basalt, serpentinized peridotite), which may reflect the S in the sulfide samples is derived mainly from the associated igneous rocks, and a relatively small proportion (< 36%) of seawater sulfur incorporated into these sulfides during mixing between seawater (δ³⁴S 21‰) and hydrothermal fluid. In contrast for a mixed origin for the source of S, the majority of the lead isotopic compositions (²⁰⁶Pb/²⁰⁴Pb 17.541 ± 0.004 to 19.268 ± 0.001, ²⁰⁷Pb/²⁰⁴Pb 15.451 ± 0.001 to 15.684 ± 0.001, ²⁰⁸Pb/²⁰⁴Pb 37.557 ± 0.008 to 38.988 ± 0.002, n = 21) of the sulfides possess a basaltic Pb isotopic composition, suggesting that the lead in the massive sulfide is mainly leached from local basaltic rocks that host the sub-seafloor hydrothermal systems in sediment-free mid-ocean ridges and mature back-arc basins. Furthermore, sulfide minerals in the super-fast and fast spreading mid-ocean ridges (MORs) exhibit less spread in their the δ³⁴S values compared to sulfides from super-slow, and slow spreading MORs, which is most easily explained as a lesser degree of fluid-rock interaction and hydrothermal fluid-seawater mixing during hydrothermal ore-forming process. Additionally, the S and Pb isotope compositions of sulfides are controlled by the fluid processes for forming seafloor massive sulfide deposits. We demonstrate that the variable sulfur and lead isotopic compositions exhibit a relationship with the sulfur and lead sources, fluid–rock interaction, and fluid–seawater mixing.     

The origin of the Dapingzhang volcanogenic Cu–Pb–Zn ore deposit,Yunnan province,SW China: Constraints from host rock geochemistry and ore Os–Pb–S–C–O–H isotopes

The Dapingzhang volcanogenic Cu–Pb–Zn sulfide deposit is located in the Lancangjiang tectonic zone within the Sanjiang region, Yunnan province of southwestern China. The deposit occurs within a felsic volcanic dome belonging to a mid-Silurian volcanic belt stretching for more than 100 km from Dapingzhang to Sandashan. The mineralized volcanic rocks are predominantly keratophyre and quartz keratophyre with subordinate spilite. The Dapingzhang deposit is characterized by well-developed vertical zonation with stockwork ores in the bottom, disseminated sulfide ores in the middle, and massive sulfide ores in the top, overlain by a thin layer of chemical sedimentary exhalative rocks (chert and barite). The Re–Os age of the pyrites from the deposit is 417 ± 23 Ma, indistinguishable from the age of the associated felsic volcanic rocks. The associated felsic volcanic rocks are characterized by negative Nb–Ta anomalies and positive ε_Nd(t) values (+ 4.4–+6.5), similar to the coeval calc-alkaline volcanic rocks in the region. This observation supports the interpretation that the felsic volcanic rocks associated with the Dapingzhang deposit are the derivatives of arc basaltic magma by extensive fractional crystallization. The δ³⁴S values of the sulfides from the deposit vary from − 1.24 to + 4.32‰, indicating a predominantly magmatic source for the sulfur. The sulfides are also characterized by homogeneous and relatively low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.310–18.656, ²⁰⁷Pb/²⁰⁴Pb = 15.489–15.643 and ²⁰⁸Pb/²⁰⁴Pb = 37.811–38.662), similar to the Pb isotopic compositions of the associated volcanic rocks. The Pb isotopic data indicate that mantle-derived Pb is more prevalent than crust-derived Pb in the deposit. The S–Pb isotopic data indicate that the important ore-forming materials were mainly derived from the associated volcanic rocks. The δ¹³C_PDB and δ¹⁸O_SMOW values of the associated hydrothermal calcite crystals vary from − 2.3‰ to + 0.27‰ and from + 14.6 to + 24.4‰, respectively. These values are between the mantle and marine carbonate values. The narrow range of the δ¹³C_PDB values for the calcite indicates that carbon-bearing species in the hydrothermal fluids were primarily derived from marine carbonates. The δ¹⁸O values for the hydrothermal fluids, calculated from the measured values for quartz, are between − 2.1‰ and + 3.5‰. The corresponding δD values for the fluids range from − 59‰ to − 84‰. The O–H isotopic data indicate mixing between magmatic fluids and seawater in the ore-forming hydrothermal system. Similar to a typical volcanogenic massive sulfide (VMS) deposit, the ore-forming fluids contained both magmatic fluids and heated seawater; the ore metals and regents were derived from the underlying magma as well as felsic country rocks.     

The Cipoeiro gold deposit,Gurupi Belt,Brazil: Geology,chlorite geochemistry,and stable isotope study

The Cipoeiro gold deposit, located in the Gurupi Belt, northern Brazil, is hosted by tonalites of 2148 Ma. The deposit is controlled by splays related to the major strike-slip Tentugal shear zone, and at the deposit scale, the mineralization is confined to ductile–brittle shear zones. Mineralization style comprises thick quartz veins and narrow and discontinuous quartz-carbonate veinlets associated with disseminations in altered host rocks. The postmetamorphic hydrothermal paragenesis is composed of quartz, calcite, chlorite, white mica (phengite), pyrite, and minor albite. Electron microprobe analysis of chlorites reveals a relatively uniform chemical composition at depths of more than 100 m. The chlorites are characterized by (Fe + Mg) ratios between 0.37 and 0.47 and Al^IV ranging between 2.22 and 2.59 a.p.f.u. and are classified as Fe-chlinochlore. Temperatures calculated by applying the Al^IV contents of chlorites yield a relatively narrow interval of 305 ± 15°C. Stable isotope (O, H, C, S) compositions have been determined in silicate, carbonate, and sulfide minerals. The δ¹⁸O and δD values of the mineralizing fluid range from +2.4 to +5.7 and from −43‰ to −20‰, respectively, and are interpreted as having a metamorphic origin. The δ¹³C values of fluid CO₂ are in the range −10.7‰ to −3.9‰, whereas the fluid δ³⁴S is around 0‰. Carbon and sulfur compositions are not diagnostic of their sources, compatible as they are with mantle, magmatic, or average crustal reservoirs. The hydrothermal paragenesis, chlorite–pyrite coexistence, temperature of ore formation, and sulfur isotope evidence indicate relatively reduced fO₂ conditions for the mineralizing fluid. Geologic, chemical, and isotopic characteristics of the Cipoeiro deposit are compatible with the class of orogenic gold deposits.     

Genesis of the Zhengguang gold deposit in the Duobaoshan ore field,Heilongjiang Province,NE China: Constraints from geology,geochronology and S-Pb isotopic compositions

The Zhengguang gold deposit in the Duobaoshan ore field, hosted in volcanic rocks of the Middle Ordovician Duobaoshan Formation, is one of the largest gold deposits in the Northeastern Great Xing’an Range of the Central Asian Orogenic Belt (CAOB). The deposit comprises the No. I, II and III ore zones with a total resource exceeding 35 tonnes of Au, 100,000 tonnes of Zn and 100 tonnes of Ag. A genetic relationship between gold mineralization and concealed tonalite porphyry is inferred based on the characteristics of cryptoexplosive breccia and hydrothermal alteration indicative of porphyry-type and epithermal mineralization. Zircon LA-ICPMS U-Pb dating reveals that the tonalite porphyry was emplaced at 462.1 ± 1.8 Ma (Middle Ordovician). The δ³⁴S_V-CDT values of sulfide minerals range from −3.0‰ to −1.7‰ with an average of −2.33‰, indicating that sulfur was mainly derived from a magmatic source. The Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb ranging from 17.572 to 17.629, ²⁰⁷Pb/²⁰⁴Pb from 15.424 to 15.486, and ²⁰⁸Pb/²⁰⁴Pb from 37.206 to 37.418) suggest a major mantle component for Pb and, by inference, for other ore metals. Therefore, we suggest that the ore-forming elements in the Zhengguang gold deposit may be related to the mantle-sourced tonalite porphyry. On the basis of the geological characteristics and geochemical signatures documented in this study, we conclude that the Zhengguang gold deposit was formed in a porphyry to epithermal transitional environment associated with the concealed tonalite porphyry, as part of the Duobaoshan porphyry-epithermal ore system that is related to the subduction of the Paleo-Asian Ocean during the Ordovician.     

Boron,sulphur and copper isotope systematics in the orogenic gold deposits of the Archaean Hattu schist belt,eastern Finland

The Hattu schist belt is located in the western part of the Archaean Karelian domain of the Fennoscandian Shield. The orogenic gold deposits with Au–Bi–Te geochemical signatures are hosted by NE–SW, N–S and NW–SE oriented shear zones that deform 2.76–2.73 Ga volcanic and sedimentary sequences, as well as 2.75–2.72 Ga tonalite–granodiorite intrusions and diverse felsic porphyry dykes. Mo–W mineralization is also present in some tonalite intrusions, both separate from, and associated with Au mineralization. Somewhat younger, unmineralized leucogranite intrusions (2.70 Ga) also intrude the belt. Lower amphibolite facies peak metamorphism at 3–5 kbar pressures and at 500–600 °C temperatures affected the belt at around 2.70 Ga and post-date hydrothermal alteration and ore formation. In this study, we investigated the potential influence of magmatic-hydrothermal processes on the formation of orogenic gold deposits on the basis of multiple stable isotope (B, S, Cu) studies of tourmaline and sulphide minerals by application of in situ SIMS and LA ICP MS analytical techniques.Crystal chemistry of tourmaline from a Mo–W mineralization hosted by a tonalite intrusion in the Hattu schist belt is characterized by Fe^3 +–Al^3 +-substitution indicating relatively oxidizing conditions of hydrothermal processes. The range of δ¹¹B data for this kind of tourmaline is from − 17.2‰ to − 12.2‰. The hydrothermal tourmaline from felsic porphyry dyke swith gold mineralization has similar crystal chemistry (e.g. dravite–povondraite compositional trend with Fe^3 +–Al^3 + substitution) and δ¹¹B values between − 19.0‰ and − 9.6‰. The uvite–foitite compositional trend and δ¹¹B ‰ values between − 24.1% and − 13.6% characterize metasomatic–hydrothermal tourmaline from the metasediment-hosted gold deposits. Composition of hydrothermal vein-filling and disseminated tourmaline from the gold-bearing shear zones in metavolcanic rocks is transitional between the felsic intrusion and metasedimentary rock hosted hydrothermal tourmaline but the range of average boron isotope data is essentially identical with that of the metasediment-hosted tourmaline. Rock-forming (magmatic) tourmaline from leucogranite has δ¹¹B values between − 14.5‰ and − 10.8‰ and the major element composition is similar to that of the metasediment-hosted tourmaline.The range of δ³⁴S_VCDT values measured in pyrite, chalcopyrite and pyrrhotite is from − 9.1 to + 8.5‰, which falls within the typical range of sulphur isotope data for Archaean orogenic gold deposits. In the Hattu schist belt, positive δ³⁴S_VCDT values characterize metasediment-hosted gold ores with sulphide parageneses dominated by pyrrhotite and arsenopyrite. The δ³⁴S_VCDT values are both positive and negative in ore mineral parageneses within felsic intrusive rocks in which variable amounts of pyrrhotite are associated with pyrite. Purely negative values were only recorded from the pyrite-dominated gold mineralization within metavolcanic units. Therefore the shift of δ³⁴S_VCDT values to the negative values reflects precipitation of sulphide minerals from relatively oxidizing fluids. The range of measured δ⁶⁵Cu_NBS978 values from chalcopyrite is from − 1.11 to 1.19‰. Positive values are common for mineralization in felsic intrusive rocks and negative values are more typical for deposits confined to metasedimentary rocks. Positive and negative δ⁶⁵Cu_NBS978 values occur in the ores hosted by metavolcanic rocks. There is no correlation between sulphur and copper isotope data obtained in the same chalcopyrite grains.Evaluation of sulphur and boron isotope data together and comparisons with other Archaean orogenic gold provinces supports the hypothesis that the metasedimentary rocks were the major sources of sulphur and boron in the orogenic gold deposits in the Hattu schist belt. Variations in major element and boron isotope compositions in tourmaline, as well as in the δ³⁴S_VCDT values in sulphide minerals are attributed to localized involvement of magmatic fluids in the hydrothermal processes. The results of copper isotope studies indicate that local sources of copper in orogenic gold deposits may potentially be recognized if the original, distinct signatures of the sources have not been homogenized by widespread interaction of fluids with a large variety of rocks and provided that local chemical variations have been too small to trigger changes in the oxidation state of copper during hydrothermal processes.     

Inhomogeneous lithospheric thinning in the central North China Craton: Zircon U–Pb and S–He–Ar isotopic record from magmatism and metallogeny in the Taihang Mountains

The large scale Mesozoic magmatism and related metallogeny in the Taihang Mountains (TM) provide important clues for the lithospheric thinning of the North China Craton (NCC). Among the ore deposits, the vein gold mineralization of Shihu in the Fuping region and the skarn ore deposit of Xishimen in the Wu'an region represent typical Mesozoic metallogeny in the TM. In the Shihu gold mine, the Mapeng batholith is dominantly composed of monzogranite and granodiorite, whereas, the Wu'an pluton in the Xishimen iron mine mainly comprises monzonite and diorite. Here we present zircon LA–ICP-MS U–Pb data from 8 samples which reveal the timing of magmatism in the TM as ca. 130 Ma, which is contemporaneous with the large-scale metallogeny in the margins of the NCC. The δ³⁴S values recorded in the sulfide minerals from the Shihu gold deposit and the Xishimen skarn iron deposit show a range of 2.2‰–5.0‰, and 11.6‰–18.7‰, respectively. Helium isotopic compositions of fluid inclusions in pyrite from the Shihu gold deposit vary from 0.12 to 1.98 Ra (where Ra is the ³He/⁴He ratio of air = 1.39 × 10^? 6), with calculated mantle helium values of 1.4%–25%, whereas, those of the Xishimen skarn iron deposit range from 0.06 to 0.19 Ra, with calculated mantle helium of 0.7%–2.2%. The S–He–Ar isotopic data suggest a lower crustal origin for the ore-forming components, with variable inputs of mantle source. The large population of inherited zircons in our samples, with ²⁰⁷Pb/²⁰⁶Pb ages ranging between 2500 Ma and 1800 Ma, also supports crustal participation. Our data reveal that the Shihu gold deposit witnessed greater mantle input than the Xishimen skarn iron deposit, suggesting that the continental lithosphere is markedly thinner under the Fuping region than that under the Wu'an region. Our interpretation is also supported by published data from two ultra-broadband high-precision magnetotelluric sounding profiles across the TM region showing a variation in the lithosphere thickness from 155 km to 70 km while moving from the south (Wu'an region) to the north (Fuping region). Our study suggests that inhomogeneous lithospheric thinning in the central NCC occurred at least as early as ca. 130 Ma ago.