Hydroxy acids in Antarctic lake sediments and their geochemical significance

Hydroxy acids in sediments of Lakes Bonney, Fryxell, Joyce and Vanda, and unnamed ponds (B2, NF1, NF2 and L4) as well as in cyanobacterial mats from the McMurdo Sound region of southern Victoria Land in Antarctica have been studied to clarify their features and elucidate their source organisms. Normal and branched (iso and anteiso) 2-hydroxy acids were found in all the samples studied with the predominance of even- and odd-carbon numbers, respectively. The most dominant 2-hydroxy acids in the sediments were mainly short-chain components (<C₂₀). Normal and branched 3-hydroxy acids were detectewith the predominance of even- and odd-carbon numbers, respectively, in total concentrations between 0.48 and 53 μg/g of dry sediment. (ω-1)-Hydroxy acids were all long-chains (C₂₂, C₂₄, C₂₆, C₂₈ and C₃₀). 9,10-Dihydroxyhexadecanoic and/or 9,10-dihydroxyoctadecanoic acids were identified in all the sediments and a cyanobacterial mat. The composition of hydroxy acids differ considerably among the lakes and ponds, suggesting the difference of source organisms. These 2-, 3- and (ω-1)-hydroxy, and 9,10-dihydroxy acids may be derived from cyanobacteria and microalgae, in addition to non-photosynthetic microorganisms. Cyanobacteria and microalgae which are widely distributed in the world, may be important sources of hydroxy acids in the natural environments.     

Characterisation of the non-asphaltene products of mild chemical degradation of asphaltenes

The major steranes of the non-asphaltene fraction of Nigerian tar sand bitumen (maltene) are the c₂₇-c₂₉ diasteranes [13β(H),17α(H); 20R + S] and C₂₈-C₂₉ regular steranes [14β (H),17β (H); 20S]. The reducing metal reaction products of the corresponding asphaltenes (maltene-I) contain mainly C₂₇-C₂₉ regular steranes with the 14β(H),17β(H); 20R + S and 14α(H),17α(H); 20R + S configurations as well as the corresponding diasteranes having the 13β(H),17α(H); 20R + S configuration. These sterane distributions suggest that maltene-I corresponds to an unaltered oil whilst the maltene is equivalent to the product of severe biodegradation of maltene-I. This is consistent with maltene-I being the remnant of “original oil” trapped within the asphaltene matrix and protected from the effect of in-reservior biodégradation.Degradation of Nigerian asphaltenes by refluxing with ferric chloride-acetic anhydride or methanolic potassium hydroxide also releases soluble reaction products having the characteristics of unaltered oil such as the presence of n-alkanes having an unbiased distribution. These methods appear to be milder and more suitable than reducing metal reactions for releasing hydrocarbons occluded by asphaltenes.     

Thermodynamic stability of various alkylated, dealkylated and rearranged 17α- and 17β-hopane isomers using molecular mechanics calculations

The thermodynamic stability of selected alkylated, dealkylated and rearranged 17α- and 17β-hopane isomers in the C₂₇, C₂₈, C₂₉, C₃₀ and C₃₁ families were calculated using molecular mechanics (MM2) methods and, where possible, calculated equilibrium ratios of certain isomers were compared with observed ratios of isomers in thermally mature crude oil samples. Those calculated and observed ratios having similar values include: (1) the relative distributions among 17β(H)/17α(H) and 21β(H)/21α(H)-hopanes including the absence of the 17β(H),21β(H)- and 17α(H),21α(H)-hopanes; (2) the 22R/22S ratios in 30-methyl-17α-hopane and 30-methyl-17β-moretane; (3) the relative distributions among 17α(H)/17β(H)- and 21α(H)/21β(H)-28,30-bisnorhopanes and among 25,28,30-trisnorhopanes, including the relatively greater stability of 17β(H) isomers in contrast to the regular hopane series; and (4) the ratios of 28(18−17S)abeo hopanes with respect to their unrearranged counterparts including the C₂₇ compounds, Ts/Tm.     

Geosteranes: Identification and synthesis of a novel series of 3-substituted steranes

A novel series of 3-alkyl and 3-carboxyalkyl-5β(H)-steranes 7–10 along with a full homologous series of carboxyalkyl-sterane (C₁ to C₆) 4–6 with 3α(H)5α(H) configuration have been identified in marine-evaporitic oils from Fazenda Belém, Potiguar Basin (Brazil) on the basis of mass spectral interpretation. The synthesis of enantiomerically pure 3α-alkyl-5β(H)-cholestane and 3β-alkyl-5α(H)-cholestane standards and their coinjection with petroleum fractions confirmed the structural assignments.     

The use of bisnorhopane as a stratigraphic marker in the Oseberg Back Basin, North Viking Graben, Norwegian North Sea

This paper discusses the occurrence of 28,30-dinor-17α,18α,21β-hopane (bisnorhopane) in stratigraphically, fairly well preserved Viking Group sections from wells in local depressions in the North Viking Graben Area. The results show the presence of high relative amounts of bisnorhopane in the “Syn-rift sections”, whilst the “Post-rift sections” contain little or no bisnorhopane. Since most exploration wells are drilled on structural highs, primarily penetrating the “Post-rift Draupne”, this may explain why many analyzed source rock sections in this area contain little bisnorhopane.As a correlation of Draupne sections using the vertical, relative bisnorhopane distributions, it is suggested to be a potential stratigraphic marker for the area, indicating the presence of “Syn-rift Draupne” sediments.The relative bisnorhopane amounts follow a logarithmic reduction with depth and thermal maturity. The bisnorhopane signal is nearly extinguished at 3700 m depth at a maturity of R_o = 0.9–1.0%.     

The role of “excess” CO2 in the formation of trona deposits

The prevailing theory for the formation of trona [Na₃(CO₃)(HCO₃) · 2(H₂O)] relies on evaporative concentration of water produced by silicate hydrolysis of volcanic rock or volcaniclastic sediments. Given the abundance of closed drainage basins dominated by volcanics, it is puzzling that there are so few trona deposits and present-day lakes that would yield dominantly Na–CO₃ minerals upon evaporation. Groundwater in the San Bernardino Basin (southeastern Arizona, USA and northeastern Sonora, Mexico) would yield mainly Na–CO₃ minerals upon evaporation, but waters in the surrounding basins would not. Analysis of the chemical evolution of this groundwater shows that the critical difference from the surrounding basins is not lithology, but the injection of magmatic CO₂. Many major deposits of trona and Na–CO₃-type lakes appear to have had “excess” CO₂ input, either from magmatic sources or from the decay of organic matter. It is proposed that, along with the presence of volcanics, addition of “excess” CO₂ is an important pre-condition for the formation of trona deposits.     

Primary cracking of kerogens. Experimenting and modelling C1, C2–C5, C6–C15 and C15+ classes of hydrocarbons formed

Mathematical models of hydrocarbon formation can be used to simulate the natural evolution of different types of organic matter and to make an overall calculation of the amounts of oil and/or gas produced during this evolution. However, such models do not provide any information on the composition of the hydrocarbons formed or on how they evolve during catagenesis.From the kinetic standpoint, the composition of the hydrocarbons formed can be considered to result from the effect of “primary cracking” reactions having a direct effect on kerogen during its evolution as well as from the effect of “secondary cracking” acting on the hydrocarbons formed.This report gives experimental results concerning the “primary cracking” of Types II and III kerogens and their modelling. For this, the hydrocarbons produced have been grouped into four classes (C₁, C₂–C₅, C₆–C₁₅ and C₁₅₊). Experimental data corresponding to these different classes were obtained by the pyrolysis of kerogens with temperature programming of 4°C/min with continuous analysis, during heating, of the amount of hydrocarbons corresponding to each of these classes.The kinetic parameters of the model were optimized on the basis of the results obtained. This model represents the first step in the creation of a more sophisticated mathematical model to be capable of simulating the formation of different hydrocarbon classes during the thermal history of sediments. The second step being the adjustment of the kinetic parameters of “secondary cracking”.     

Biomarker assemblage of some Miocene-aged Bulgarian lignite lithotypes

Two homogeneous (humovitrain and xylain) and one heterogeneous (humoclarain) lithotype macerals, separated from a lignite, were subjected to mild reductive treatment by NaH. The extensive chromatographic separation of the decalin-soluble fraction revealed some structural peculiarities. A strong predominance of α-phyllocladane was characteristic for all macerals. Series of n-, iso-, and anteiso-alkanes, regular isoprenoids, alkylbenzenes and 1-methyl-4-n-alkylcyclohexanes were identified by mass spectrometry. An angiosperm source input was represented by friedelane, lupane and seco-hopane structures. Products of des-A and des-E-ring cleavages and C-10 demethylation were registered by mass spectrometry. The main difference was in the hopane distribution pattern. A strong prevalence of extended ββ-hopanes was found in the humoclarain sample. The mass spectral data revealed the existence of a basic difference in hopane precursors—diploptent or diplopterol for the homogeneous lithotypes and bacteriohopanetetrol for the heterogeneous lithotype.     

Radiocaesium dispersion and fixation in the lagoon systems of “Ria de Aveiro”, Portugal

Radiocaesium (¹³⁷Cs) dispersion and Cs⁺ fixation were studied in the sediments collected from the lagoon systems of “Ria de Aveiro”. The Cs⁺ sorption was tested for the fine mica grains and for the < 2 μm clay fractions extracted from silty clays. The Cs⁺ exchange is found strongly onto mica-rich fractions than smectite-rich fractions. The distribution coefficient increases if the silty material is constituted by rich-mica clay fractions or if the non-clay minerals are removed from the silty-clay material. The samples studied behave as multisite ion exchange, where Cs⁺ engages in ion-exchange reactions with hydrated cations on planar sites on expansible layer silicates. Higher concentrations of the ¹³⁷Cs were found associated with mica-rich silty clays. The ¹³⁷Cs ranges from 3.2 to 3.9 Bq kg^− 1 in the < 38 μm fractions and from 2.9 to 3.3 Bq kg^− 1 in the < 64 μm fractions.     

Early generation of 20S-5α(H),14α(H),17α(H)- and 5α(H),14β(H),17β(H)-steranes in low salinity lacustrine shales

A quantitative sterane biomarker study was conducted on a series of paralic freshwater lacustrine shale samples ranging in maturity from immature to near oil window maturity taken from Section 3 of the Shahejie Formation (Es3) in the Liaohe Basin, N.E. China. Concentrations of 5α(H),14α(H),17α(H)-20S and 5α(H),14β(H),17β(H)-steranes remain nearly constant throughout the sample suite. However, the decrease in the absolute concentrations of the 20R-5α(H),14α(H),17α(H)-C₂₉ steranes with increasing maturity results in an increase in the conventionally defined maturity parameters, 20S/(20S + 20R)-ααα and αββ/(ααα + αββ) sterane ratios. In addition, the data suggest that relatively early generation of 5α(H),14α(H),17α(H)-20S and 5α(H),14β(H),17β(H)-steranes has occurred in lacustrine sediments with a vitrinate reflectance 0.3% (R_o). The data provide strong support for the major importance of relative thermal stability of epimers, but do not exclude the possibility of isomerization as a viable mechanism for production.     

Environmental control of carbon isotope variations in Pennsylvania black-shale sequences, Midcontinent, U.S.A.

A reversal of the conventional carbon isotope relationship, “terrestrial-lighter-than-marine” organic matter, has been documented for two Pennsylvanian (Desmoinesian) cyclothemic sequence cores from the Midcontinent craton of the central United States. “Deep” water organic-rich phosphatic black shales contain a significant proportion of algal-derived marine organic matter (as indicated by organic petrography, Rock-Eval hydrogen index and ratios) and display the lightest δ¹³C-values (max −27.80‰ for kerogen) while shallower water, more oxic facies (e.g. fossiliferous shales and limestones) contain dominantly terrestrial organic matter and have heavier δ¹³C_kerogen-values (to −22.87‰ for a stratigraphically adjacent coal). δ¹³C-values for extract fractions were relatively homogeneous for the organic-rich black shales with the lightest fraction (often the aromatics) being only 1‰, or less, more negative than the kerogen. Differences between extract fractions and kerogens were much greater for oxic facies and coals (e.g. saturates nearly 5‰ lighter than the kerogen).A proposed depositional model for the black shales calls upon a large influx of nutrients and humic detritus to the marine environment from the laterally adjacent, extremely widespread Pennsylvanian (peat) swamps which were rapidly submerged by transgression of the epicontinental seas. In this setting marine organisms drew upon a CO₂-reservoir which was in a state of disequilibrium with the atmosphere, being affected by isotopically light “recycled-CO₂” derived from the decomposition of peaty material in the water column and possibly from the anoxic diagenesis of organic matter in the sediments.     

Geodynamic significance of the Raspas Metamorphic Complex (SW Ecuador): geochemical and isotopic constraints

The Raspas Metamorphic Complex of southwestern Ecuador is regarded as the southernmost remnant of oceanic and continental terranes accreted in the latest Jurassic–Early Cretaceous. It consists of variably metamorphosed rock types. (1) Mafic and ultramafic rocks metamorphosed under high-pressure (HP) conditions (eclogite facies) show oceanic plateau affinities with flat REE chondrite-normalized patterns, Nd_{150 Ma} ranging from +4.6 to 9.8 and initial Pb isotopic ratios intermediate between MORB and OIB. (2) Sedimentary rocks metamorphosed under eclogitic conditions exhibit LREE enriched patterns, strong negative Eu anomalies, Rb, Nb, U, Th, Pb enrichments, low Nd_{150 Ma} values (from −6.4 to −9.5), and high initial ⁸⁷Sr/⁸⁶Sr and ^206,207,208Pb/²⁰⁴Pb isotopic ratios suggesting they were originally sediments derived from the erosion of an old continental crust. (3) Epidote-bearing amphibolites show N-MORB affinities with LREE depleted patterns, LILE, Zr, Hf and Th depletion, high Nd_{150 Ma} (>+10) and low initial Pb isotopic ratios.The present-day well defined internal structure of the Raspas Metamorphic Complex seems to be inconsistent with the formerly proposed interpretation of a “tectonic mélange”. The association of oceanic plateau rocks and continent-derived sediments both metamorphosed in HP conditions suggests that the thin edge of the oceanic plateau first entered the subduction zone and dragged sediments downward of the accretionary wedge along the Wadatti–Benioff zone. Subsequently, when its thickest part arrived into the subduction zone, the oceanic plateau jammed the subduction processes, due to its high buoyancy.In Ecuador and Colombia, the latest Jurassic–Early Cretaceous suture involves HP oceanic plateau rocks and N-MORB rocks metamorphosed under lower grades, suggesting a composite or polyphase nature for the latest Jurassic–Early Cretaceous accretionary event.     

Elucidation of different forms of organic carbon in marine sediments from the Atlantic coast of Spain using thermal analysis coupled to isotope ratio and quadrupole mass spectrometry

Analysis of river, estuary and marine sediments from the Atlantic coast of Spain using thermogravimetry–differential scanning calorimetry–quadrupole mass spectrometry–isotope ratio mass spectrometry (TG–DSC–QMS–IRMS) was used to (a) distinguish bulk chemical hosts for C within a sediment and humic acid fraction, (b) track C pools with differing natural C isotope ratios and (c) observe variation with distance from the coast. This is the first application of such a novel method to the characterisation of organic matter from marine sediments and their corresponding humic acid fractions. Using thermal analysis, a labile, a recalcitrant and a refractory carbon pool can be distinguished. Extracted humic fractions are mainly of recalcitrant nature. The proportion of refractory carbon is greatest in marine sediments and humic acid fractions. Quadrupole mass spectrometry confirmed that the greatest proportion of m/z 44 (CO₂) and m/z 18 (H₂O) were detected at temperatures associated with recalcitrant carbon (510–540 °C). Isotope analysis detected progressive enrichment in δ¹³C for the sediment samples with an increase in marine influence. Isotopic heterogeneity in the refractory organic matter in marine sediments could be due to products of anthropogenic origin or natural combustion products. Isotope homogeneity of humic acids confirms the presence of terrigenous C in marine sediments, allowing the terrestrial input to be characterised.     

Petrologic and geochemical characteristics of “barkinite” from the Dahe mine, Guizhou Province, China

Although “barkinite” has long been studied by many geologists, its geochemical characteristics and environment of deposition are still not known in detail. In order to study the petrography and geochemical characteristics of “barkinite”, coal samples from two Permian coal seams were taken from the Dahe mine, Guizhou Province. The samples were separated into maceral fractions, and then analyzed by microscopical, isotopic, Rock-Eval, and geochemical methods. The microscopical results indicate that “barkinite” occurs as four main types. According to their relationship to other maceral groups, “barkinite” is ostensibly formed under variably dry–wet or oxidizing–reducing conditions. The extract yield, isotope data and Rock-Eval values of “barkinite” are different from other macerals. Microscopical and geochemical results indicate that “barkinite” forms part of the liptinite group.     

Geochemical, Sr–Nd and zircon U–Pb–Hf isotopic studies of Late Carboniferous magmatism in the West Junggar, Xinjiang: Implications for ridge subduction?

Voluminous granitic intrusions are distributed in the West Junggar, NW China, and they can be classified as the dioritic rocks, charnockite and alkali-feldspar granite groups. The dioritic rocks (SiO₂ = 50.4–63.8 wt.%) are calc-alkaline and Mg enriched (average MgO = 4.54 wt.%, Mg^# = 0.39–0.64), with high Sr/Y ratios (average = 21.2), weak negative Eu (average Eu/Eu = 0.80) and pronounced negative Nb–Ta anomalies. Their Sr–Nd and zircon Hf isotopic compositions ((⁸⁷Sr/⁸⁶Sr)_i = 0.7035–0.7042, ε_Nd(t) = 4.5–7.9, ε_Hf(t) = 14.1–14.5) show a depleted mantle-like signature. These features are compatible with adakites derived from partial melting of subducted oceanic crust that interacted with mantle materials. The charnockites (SiO₂ = 60.0–65.3 wt.%) show transitional geochemical characteristics from calc-alkaline to alkaline, with weak negative Eu (average Eu/Eu = 0.75) but pronounced negative Nb–Ta anomalies. Sr–Nd and zircon Hf isotopic compositions ((⁸⁷Sr/⁸⁶Sr)_i = 0.7037–0.7039, ε_Nd(t) = 5.2–8.0, ε_Hf(t) = 13.9–14.7) also indicate a depleted source, suggesting melts from a hot, juvenile lower crust. Alkali-feldspar granites (SiO₂ = 70.0–78.4 wt.%) are alkali and Fe-enriched, and have distinct negative Eu and Nb–Ta anomalies (average Eu/Eu = 0.26), low Sr/Y ratios (average = 2.11), and depleted Sr–Nd and zircon Hf isotopic compositions ((⁸⁷Sr/⁸⁶Sr)_i = 0.7024–0.7045, ε_Nd(t) = 5.1–8.9, ε_Hf(t) = 13.7–14.2). These characteristics are also comparable with those of rocks derived from juvenile lower crust. Despite of the differences in petrology, geochemistry and possibly different origins, zircon ages indicate that these three groups of rocks were coevally emplaced at ~ 305 Ma.A ridge subduction model can account for the geochemical characteristics of these granitoids and coeval mafic rocks. As the “slab window” opened, upwelling asthenosphere provided enhanced heat flux and triggered voluminous magmatisms: partial melting of the subducting slab formed the dioritic rocks; partial melting of the hot juvenile lower crust produced charnockite and alkali-feldspar granite, and partial melting in the mantle wedge generated mafic rocks in the region. These results suggest that subduction was ongoing in the Late Carboniferous and, thus support that the accretion and collision in the Central Asian Orogenic Belt took place in North Xinjiang after 305 Ma, and possibly in the Permian.     

Molecular genetic markers and maturity indices in intermontane lacustrine facies: Kishenehn formation, Montana

Molecular markers have considerable promise as thermal maturation indicators in source rocks having a well-defined depositional environment. This occurs in the Kishenehn Formation (northwest Montana and southeast British Columbia), an Oligocene unit comprised of fluvial and lacustrine shales. Up to 3 km of these non-marine sediments were deposited in a 900 sq.km elongated half graben atop the Precambrian rocks of the Lewis Thrust sheet. Specific outcrops of the Coal Creek Member of the Kishenehn Formation are known to contain excellent potential source rocks, including extensive oil shales. The source rock potential and molecular marker geochemistry of most of the major Kishenehn outcrops have now been investigated, and regional results are presented in this paper.source rock analysis of a regional suite of Kishenehn samples indicates excellent petroleum potential (immature Type I kerogen) throughout the basin. Several classes of distinctive diagenetic molecular markers occur within the Coal Creek Member of the Kishenehn Formation, including diasterenes, spirosterenes, methylspirosterenes, B-ring monoaromatic anthrasteroids, ββ-hopanes and moretanes. Molecular markers indicative of non-marine deposition include dehydroabietane (conifer input) and an onocerane recently identified in leaf fossils of Miocene lacustrine beds in adjacent Idaho. Triterpane ratios are significantly more sensitive than vitrinite reflectance methods in assessing thermal maturation in the Kishenehn, and are successfully used in this study to order outcrop locations according to thermal maturity level. The systematic variation of specific markers with increasing thermal maturation suggests that molecular correlation is feasible, and could provide a method of assessing stratigraphic continuity in the basin.     

Solid inclusions of magmatic halite and sylvite in felsic granitoids, Sierra Norte, Córdoba, Argentina

This study provides evidence for the existence of halite and sylvite solid inclusions in igneous quartz and feldspars, the first to be reported in intrusive rocks, and to partially constrain the physicochemical environment that lets halides crystallize under magmatic conditions.Halite and sylvite solid inclusions were found included in quartz and feldspars from a micrographic–granophyric assemblage in a miarolitic aplite and, rarer, in alkali-feldspar from a miarolitic monzogranite. Monzogranite and aplite represent I-type, K-enriched postcollisional rocks of the Late Cambrian–Early Ordovician Sierra Norte–Ambargasta batholith in the Eastern Sierras Pampeanas. Both granitoids fall among the most evolved felsic rocks of the batholith, with aplite approaching haplogranitic compositions. Halite is far more common than sylvite and the presence and distribution of one or both halides are erratic within the felsic intrusive bodies. Halides occur as small skeletal grains, commonly in cross-shaped aggregates of less than 50 μm. No K or Na was found at the detection limits of EDS in either halite or sylvite respectively. Textural relationships suggest that the alkali-chlorides separated from the melt near the minima along the quartz–feldspar cotectics of P_H2O > 160 < 200 MPa in a silica-, and potassium-rich magmatic system at approximately 750–700 °C, prior to the H₂O-vapor saturated miarole-forming stage.Computed ratios for the magmatic volatile phase (MVP) coexisting with melt at the early stage of aplite crystallization are: NaCl/HCl = 0.11–0.97 and KCl/HCl = 0.24–1.62, being the highest range of values (0.79–0.97 and 1.45–1.62, respectively) found in those alkali-chloride-bearing samples. Maximum HCl/ΣCl_(MVP) (0.28 to 0.31) indicates higher total Cl concentration in the MVP of alkali-chloride-bearing aplites, which is much higher in the halite-free aplite samples (HCl/ΣCl_(MVP) = 0.59 to 0.74). One miarolitic monzogranite sample, where halite solid inclusions are present, also yielded the highest ratios for NaCl/HCl_(MVP) (0.91) and KCl/HCl_(MVP) (1.46), and the HCl/ΣCl_(MVP) is 0.30. A high HCl concentration in the fluid phase is suggested by the log f(HF)/f(H₂O) = − 4.75 to − 4.95, log f(HCl)/f(H₂O) = − 3.73 to − 3.86, and log f(HF)/f(HCl) = − 0.88 to − 1.22, computed at 750 °C after biotite composition. The Cl concentrations at 800 °C, computed with a D^v/l_Cl = 0.84 + 26.6P (P at 200 MPa), yielded values within the range of  70 to 700 ppm Cl in the melt and  4000 to 40 000 ppm Cl in the coexisting MVP. The preferential partitioning of Cl in the vapor phase is controlled by the D^v/l_Cl; however, the low concentration of Cl in the melt suggests that high concentrations of Cl are not necessary to saturate the melt in NaCl or KCl.Cl-saturation of the melt and coexisting MVP might have been produced by a drop in Cl solubility due to the near-haplogranitic composition of the granitoids after extreme fractionation, probably enhanced by fluctuating reductions of the emplacement pressure in the brittle monzogranite host. Liquid immiscibility, based in the differential viscosity and density among alkali-chloride saturated hydrosaline melt, aluminosilicate felsic melt, and H₂O-rich volatiles is likely to have crystallized halite and sylvite from exsolved hydrosaline melt. High degrees of undercooling might have been important at the time of alkali-chloride exsolution. The effectiveness of alkali-chloride separation from the melt at magmatic temperatures is in line with the interpretation of “halite subtraction” as a necessary process to understand the origin of the “halite trend” in highly saline fluid inclusions from porphyry copper and other hydrothermal mineralizations, despite the absence of the latter in the Cerro Baritina aplites, where this process preceded the exsolution of halite-undersaturated fluids.Pervasive alteration of the monzogranite country rock as alkali-metasomatic mineral assemblages, the mineral chemistry of some species, and the association of weak molybdenite mineralization are compatible with the activity of alkaline hypersaline fluids, most likely exsolved during the earliest stages of aplite consolidation.     

Lipid geochemistry of Lake Kinneret

Lake Kinneret, a relict lake from the Neogene, is characterised by the dominance among its phytoplankton of the dinoflagellate Peridinium cinctum. The lipid geochemistry of Lake Kinneret is discussed herein in terms of the biology, chemistry and hydrology of the lake. Lipids isolated from two sediment sections (surface and 15 cm deep), obtained from the deepest point of Lake Kinneret, include: (1) 4α-methyl-5α (H)-stanols and related derivatives characteristic of P. cinctum, the novel sterol 4a-methylgorgosterol, and peridinosterol and 4α-methylgorgostanol, not previously reported to occur in lacustrine sediments; (2) C₃₀ and C₃₂ alkane-1,15-diols, not previously reported to occur in contemporary lacustrine deposits, and (3) products of early diagenesis. Many similarities were observed with the more widely studied marine dinoflagellates and marine sediments with dinoflagellate input.     

Origin of methane in high-arsenic groundwater of Taiwan – Evidence from stable isotope analyses and radiocarbon dating

Groundwaters in the confined aquifers of the Chianan and Ilan coastal plains of Taiwan are rich in dissolved methane (CH₄). Serious endemic “blackfoot disease”, which occurred in the Chianan plain, especially during AD1950-1970, has been demonstrated to have arisen from drinking highly reducing groundwater with abnormal arsenic and humic substance levels. In order to explore the origin of CH₄ and its hydrological implications, stable carbon isotope ratios (δ¹³C) and radiocarbon (¹⁴C) ages of exsolved CH₄, dissolved inorganic carbon (DIC), and sedimentary biogenic sediments from a total of 34 newly completed water wells at 16 sites were determined. The main results obtained are as follows: (1) The δ¹³C_CH4 (−65‰ to −75‰) values indicate that, except for one thermogenic sample (δ¹³C_CH4=38.2‰) from the Ilan plain, all CH₄ samples analyzed were produced via microbially mediated CO₂ reduction. Many δ¹³C_DIC values are considerably greater than −10‰ and even up to 10‰ due to Rayleigh enrichment during CO₂ reduction. (2) Almost all the ¹⁴C ages of CH₄ samples from the shallow aquifer (I) (<60 m depth) are greater than the ¹⁴C ages of coexisting DIC and sediments, suggesting the presence of CH₄ from underlying aquifers. (3) The ¹⁴C ages of coexisting CH₄, DIC and sediments from aquifer (II) of the Chianan plain are essentially equal, reflecting in-situ generation of CH₄ and DIC from decomposition of sedimentary organic matter and sluggishness of the groundwater flow. On the other hand, both CH₄ and DIC from each individual well of the relatively deep aquifers (III) and (IV) in the Chianan plain are remarkably younger than the deposition of their coexisting sediments, indicating that current groundwaters entered these two aquifers much later than the deposition of aquifer sediments. (4) Each CH₄ sample collected from the Ilan plain is older than coexisting DIC, which in turn is distinctly older than the deposition of respective aquifer sediments, demonstrating the presence of much older CO₂ and CH₄ from underlying strata.     

Algal pigments in sediments as a measure of eutrophication in the Baltic environment

A method of quantitative comparison of eutrophication of an area is proposed for the Baltic Sea, based on pigment content in sediments. The pigments concerned were chlorins a (i.e. chlorophylls a, b and selected chlorophyll a derivatives) and chlorophylls c. The analyses were performed on 300 samples from different layers of recent (0–10 cm) sediments, collected from about 50 stations, at different sites of the southern Baltic, including the estuaries of the two largest Polish rivers, in different seasons between 1992 and 2001, before and after the great flood of July 1997. The results are related to sampling site, sediment layer and hydrological conditions and also to organic carbon and E_h in sediments, oxygen and salinity in near-bottom waters. Depending on different chlorin a content in 0–1 and 0–10 cm layers, the sampling sites are classified into one of three groups: 1. Szczecin Lagoon and the Deep of Gda sk stations (permanently eutrophic, chl a in 0–1 cm >40 nmol/g, Σchlns a in 0–1 in 0–10 cm layer, Σchlns a_A in Σchlns a=55–65%), 2. Open sea stations (mesotrophic/oligotrophic, chl a in 0–1 cm <10 nmol/g, Σchlns a in 0–1 in 0–10 cm layer, Σchlns a_A in Σchlns a 50%; and 3. Coastal stations (periodically eutrophic, chl a in 0–1 cm 10–40 nmol/g, Σchlns a_A in Σchlns a 40%). The correlation coefficient between chlorophyll a and chlorophylls b and c indicates the classes of algae, which could be the main source of organic matter in the sediments. A high correlation with chlorophylls c is a marker of diatoms; a high correlation with chlorophyll b is a marker of green algae; and low correlation both with chlorophylls b and c—indicates a high blue–green algae input.