Monazite dating of granitic gneisses and leucogranites from the Kerala Khondalite Belt,southern India: implications for Late Proterozoic crustal evolution in East Gondwana

Two stages of granitic magmatism occurred during the Pan-African evolution of the Kerala Khondalite Belt (KKB) in southern India. Granitic gneisses were derived from porphyritic granites, which intruded prior to the main stage of deformation and peak-metamorphism. Subsequently, leucogranites and leucotonalites formed during fluid-absent melting and intruded the gneiss sequences. Monazites from granitic gneisses, leucogranites and a leucotonalite were investigated by conventional U-Pb and electron microprobe dating in order to distinguish the different stages of magma emplacement. U-Pb monazite dating yielded a wide range of ages between 590–520 Ma which are interpreted to date high-grade metamorphism rather than magma emplacement. The results of this study indicate that the KKB experienced protracted heating (>50 Ma) at temperatures above 750–800 °C during the Pan-African orogeny. The tectonometamorphic evolution of the study area is comparable to southern Madagascar which underwent a similar sequence of events earlier than the KKB. The results of this study further substantiate previous assertions that the timing of high-grade metamorphism in East Gondwana shifted from west to east during the Late Proterozoic.     

MnNCKFMASH phase relations in cordierite-orthopyroxene migmatitic gneisses, southern india: implications for low-pressure crustal melting under granulite-facies

Cordierite-orthopyroxene migmatitic gneisses exposed in Achankovil unit of the Kerala Khondalite Belt, southern India show evidences of melting, melt extraction and in-situ crystallization of melt under granulite-facies conditions. The sequential mineral assemblages garnet + biotite + orthopyroxene + plagioclase + quartz (± melt) in the mesosomes and garnet + biotite + orthopyroxene + cordierite + plagioclase + K-feldspar + quartz + melt in the melanosomes makes the Achankovil cordierite-orthopyroxene migmatitic gneisses a good example of anatectic rocks, where substantial melt fractions remained in-situ during decompression and cooling. Therefore, the rocks provide an opportunity to investigate deep crustal processes and record of rheological (thermal and mechanical) reequilibration prevailed during the final stages of orogeny. The significance of cordierite formation and its possible relationship with melt formation are investigated applying theoretical calculations in the MnO-Na₂O-CaO-K₂O-FeO-MgO-Al₂O₃-SiO₂-H₂O (MnNCKFMASH) system. Results of numerical modelling of the mineral assemblages in pressure-temperature-composition (P-T-X) pseudosections using Perple_X infer that the sequence of reactions involving formation of cordierite-orthopyroxene-melt assemblage is consistent with an isothermal decompression (with a pressure drop of >1.5 kbars) at high temperatures (>800 °C), forming leucosomes. Biotite dehydration melting reactions, occurring above 4.5 kbars constrain prograde arm of the P-T trajectory and is interpreted as a product of crustal thickening, which was followed by rapid decompression. The final stage of exhumation is characterized by rehydration of cordierites in the melanosome by melt-solid interactions at exceptionally low-pressure (??3.2 kbars) conditions. The high-temperature isothermal decompression inferred from the mineral reactions and P-T-X pseudosections constitute a clockwise P-T path for the exhumation of the lower crust. This clockwise P-T path is consistent with the common tectonic model accepted for the genesis of granulite-facies migmatites during crustal thickening and later unroofing, accompanied with arc-continent collision. Our conclusions indicate low-P metamorphism and anatexis can be traced to convergent setting, where melt buoyancy considerably decreases density of the lithosphere and modifies rheology leading to rapid exhumation of the lower crust. Therefore, the crustal evolution in the Kerala Khondalite Belt is correlated with two stage processes: (i) thickening of the crust in relation to a continental-arc setting, followed by (ii) exhumation along a high-temperature stable geotherm with sufficient pressure release associated with syn- to post-convergence transpression and transtension.     

Gneiss-charnockite relation around Ponmudi,southern Kerala: evidences and implications of prograde charnockite formation in southern India

Isochemical conversion of garnet-biotite bearing paragneiss to charnockite in the Precambrian Khondalite belt of southern Kerala is described from Ponmudi area. Petrographic evidences indicate the formation of hypersthene by the breakdown of biotite in the presence of quartz following the reaction: Biotite + quartz → hypersthene + K-feldspar + vapour. The estimated pressure — temperature conditions of metamorphism are around 5–7 kbars and 750° ± 40°C. Presence of CO₂-rich, mixed CO₂-H₂O and H₂O-rich inclusions were noticed in gneiss as well as in charnockites. Charnockites contain abundant CO₂-rich inclusions.     

Sediment geochemistry of coastal environments,southern Kerala,India: implication for provenance

Late Quaternary sediments representing the floodplain, estuary and offshore environments of southern Kerala were investigated to infer provenance. The grain size reveals the dominance of sand to silty clay, clay to clayey silt and clayey silt in the floodplain, estuary and offshore sediments, respectively. The chemical index of alteration (CIA) values and A-CN-K plot attributes to high, moderate and low weathering in floodplain, estuary and offshore regions, respectively. The SiO₂/Al₂O₃ values lesser than Post-Archean Australian Shale indicate low to moderate maturity for the estuarine and offshore sediments. The geochemical immaturity indicates its derivation from low to moderately weathered source rocks. The major and trace elemental ratios and discriminant function diagrams attribute that the sediments were derived from intermediate to felsic source rocks. The enrichment of Cr and Ni concentration in the sediments compared to the upper continental crust, related to the contribution of orthopyroxenes, weathered from charnockite and garnets from the granulite terrain, respectively.     

Fluid inclusions in high-grade gneisses of the Kapuskasing structural zone,Ontario: metamorphic fluids and uplift/erosion path

Fluid inclusions in quartz grains from five samples of high-grade rocks (two paragneisses, an amphibolite, a mafic gneiss and a tonalite dike) from the 2.7 Ga Kapuskasing structural zone (KSZ), Ontario, were examined with petrographic, microthermometric and laser Raman techniques. Three types of fluid inclusions were observed: CO₂-rich, H₂O-rich and mixed CO₂-H₂O. CO₂-rich fluid inclusions are pseudosecondary or secondary in nature and are generally pure CO₂; a few contain varying amounts of CH₄·H₂O-rich fluid inclusions are secondary in nature, contain variable amounts of dissolved salts, and generally contain daughter crystals. Mixed CO₂-H₂O fluid inclusions occur where trails of H₂O-rich inclusions intersect trails of CO₂-rich inclusions. Isochores for high density (p=1.03 g/cm³) pseudosecondary, pure CO₂ inclusions intersect the lower pressure portion of the estimated P-T field for high-grade metamorphism, implying that pure CO₂ was the peak metamorphic fluid. The variable CH₄ content of CO₂ inclusions within graphite-bearing samples suggests that CH₄ was introduced locally after the formation of the CO₂ inclusions; however the origin of the CH₄ remains problematic. An aqueous fluid clearly penetrated the gneisses after the peak metamorphism (during uplift/erosion), forming secondary inclusions and contributing to the minor retrogressive hydration observed in these rocks. The presence of the pseudosecondary, high-density CO₂ inclusions in quartz crystals in the KSZ rocks constrains the uplift/ erosion path for the KSZ to one of simultaneous decrease in pressure and temperature.     

Low-density CO2-rich fluid inclusions from charnockites of southwestern Madurai Granulite Block, southern India; implications on graphite mineralization

Characterization of fluid inclusions in graphite-bearing charnockites from the southwestern part of the Madurai Granulite Block in southern India reveals a probable relation with the formation and break down of graphite during the high-grade metamorphism. The first-generation monophase pure CO₂ inclusions, the composition of which is confirmed by laser Raman spectroscopy, recorded moderate density (0.77–0.87 g/cc) corresponding to low tapping pressure (around 2 kb) than that of the peak granulite-facies metamorphism. The precipitation of graphite, as inferred from graphite inclusions and δ¹³C values of the graphite from the outcrops, is interpreted as the cause of this lowering of fluid density. An intermediate generation of pseudosecondary inclusions resulted from the re-equilibration or modification of the first-generation fluids and the CO₂ formed is interpreted to be the oxidation product from graphite. The youngest generation of fluids which caused widespread retrogression of the granulites is a low-temperature (350 °C) high-saline (32.4–52.0 wt% NaCl equivalent) brine. Carbon isotope data on the graphite from the charnockites show δ¹³C values ranging from −11.3 to −19.9‰, suggesting a possibility of mixing of carbon sources, relating to earlier biogenic and later CO₂ fluid influx. Combining the information gathered from petrologic, fluid inclusion and carbon stable isotope data, we model the fluid evolution in the massive charnockites of the southwestern Madurai Granulite Block.     

Cordierite as a sensor of fluid conditions in high-grade metamorphism and crustal anatexis

Cordierite H₂O and CO₂ volatile saturation surfaces derived from recent experimental studies are presented for P–T conditions relevant to high‐grade metamorphism and used to evaluate fluid conditions attending partial melting and granulite formation. The volatile saturation surfaces and saturation isopleths for both H₂O and CO₂ in cordierite are strongly pressure dependent. In contrast, the uptake of H₂O by cordierite in equilibrium with melts formed through biotite dehydration melting, controlled by the distribution of H₂O between granitic melt and cordierite, D_w[D_w = wt% H₂O (melt)/wt% H₂O(Crd)], is mainly temperature dependent. D_w = 2.5–6.0 for the H₂O contents (0.4–1.6 wt percentage) typical of cordierite formed through biotite dehydration melting at 3–7 kbar and 725–900 °C. This range in D_w causes a 15–30% relative decrease in the total wt% of melt produced from pelites. Cordierite in S‐type granites are H₂O‐rich (1.3–1.9 wt%) and close to or saturated in total volatiles, signifying equilibration with crystallizing melts that achieved saturation in H₂O. In contrast, the lower H₂O contents (0.6–1.2 wt percentage) preserved in cordierite from many granulite and contact migmatite terranes are consistent with fluid‐absent conditions during anatexis. In several cases, including the Cooma migmatites and Broken Hill granulites, the cordierite volatile compositions yield a_H2O values (0.15–0.4) and melt H₂O contents (2.2–4.4 wt%) compatible with model dehydration melting reactions. In contrast, H₂O leakage is indicated for cordierite from Prydz Bay, Antarctica that preserve H₂O contents (0.5–0.3 wt%) which are significantly less than those required (1.0–0.8 wt%) for equilibrium with melt at conditions of 6 kbar and 860 °C. The CO₂ contents of cordierite in migmatites range from negligible (< 0.1 wt%) to high (0.5–1.0 wt%), and bear no simple relationship to preserved cordierite H₂O contents and a_H2O. In most cases the cordierite volatile contents yield total calculated fluid activities (a_H2O + a_CO2) that are significantly less than those required for fluid saturation at the P–T conditions of their formation. Whether this reflects fluid absence, dilution of H₂O and CO₂ by other components, or leakage of H₂O from cordierite is an issue that must be evaluated on a case‐by‐case basis.     

Synthetic fluid inclusions - VII. Re-equilibration of fluid inclusions in quartz during laboratory-simulated metamorphic burial and uplift

ABSTRACT P-T conditions inferred from fluid inclusions in metamorphic rocks often disagree with the values predicted from mineral equilibria calculations. These observations suggest that inclusions formed during early stages of regional metamorphism continue to re-equilibrate during burial and subsequent uplift in response to differential pressure. P-T conditions accompanying burial and uplift were experimentally simulated by initially forming pure H₂O inclusions in quartz at elevated temperatures and pressures, and then re-equilibrating the inclusions in the presence of a 20 wt% NaCl solution such that final confining pressures ranged from 5 kbar above to 4 kbar below the initial internal pressure of the inclusions at the temperature of re-equilibration. In all samples re-equilibrated at confining pressures below the internal pressure, some inclusions were formed that had compositions of 20 wt% NaCl and densities in accord with the final P-T conditions. Additionally, some inclusions were observed to contain fluids of intermediate salinities (between 0 and 20 wt% NaCl). Densities of these inclusions were also consistent with formation at the re-equilibration P-T conditions. The remainder of the fluid inclusions observed in these samples contained pure H₂O and their homogenization temperatures corresponded to densities intermediate between the initial and final P-T conditions. In short-term experiments (7 days) where the initial internal overpressure exceeded 1 kbar, no inclusions were found that contained the original density and none were found to have totally re-equilibrated. Instead, most H₂O inclusions re-equilibrated until their internal pressures were between ∼750 and 1500 bars above the confining pressure, regardless of the initial pressure differential. In a long-term experiment (52 days), inclusions re-equilibrated at a lower confining pressure than the initial internal pressure displayed homogenization temperatures corresponding to a range in final internal pressures between 0 kbar (i.e. total re-equilibration) and 1.2 kbar above the confining pressure. In experiments where the confining pressure during re-equilibration exceeded the initial internal pressure, densities of pure H₂O inclusions increased to values intermediate between the initial and final P-T conditions. Additionally, these inclusions were generally surrounded by a three-dimensional halo of smaller inclusions, also of intermediate density, resulting in a texture similar to that previously ascribed to decrepitation from internal overpressure. In extreme cases where confining pressures were 4–5 kbar above the initial pressure, the parent inclusion almost completely closed leaving only the three-dimensional array of small (5 μm) inclusions, the outline of which may be several times the volume of the original inclusion. Groups of such inclusions closely resemble textures commonly observed in medium- to high-grade metamorphic rocks. Inclusions containing 10 and 42 wt% NaCl solutions trapped at 600 °c and 3 kbar were re-equilibrated at 600 °c and 1 kbar for 5 days in dry argon to evaluate the importance of H₂O diffusion as a mechanism of lowering the inclusion bulk density. Salinities of re-equilibrated inclusions obtained from freezing point depressions and halite dissolution temperatures indicate that original compositions were preserved. Density changes similar to those previously described were noted in these experiments, in inclusions showing no visible microfractures. Therefore, density variations observed in inclusions in this study, re-equilibrated under rapid deformation conditions, are considered to result from a change in the inclusion volume, without significant loss of contents by diffusion or leakage.     

Development of regional uplift and uplift-related strata in Gunsan Basin,Yellow Sea: implications for Cenozoic crustal extension

ABSTRACT

The Mesozoic–Cenozoic Gunsan Basin is the northeastern part of the Northern South Yellow Sea Basin between eastern China and the Korean Peninsula. On the basis of seismic interpretation, this study presents and interprets geologic features of regionally uplifted structures, the Haema Arch, located in the central western part of the basin. The Haema Arch is defined as dome-shaped uplift complexes, 95 km long and 60 km wide. It is characterized by prominent basement uplifts along its margin and plunging syncline inside the arch. The marginal large-scale uplifts are bounded by outward-dipping faults. The uplift-related strata are identified on the hanging wall block of the bounding faults and within the Haema Arch, which can be divided into pre-, syn-, and post-uplift units. The pre-uplift unit rests on the acoustic basement and shows an upturned stratal pattern near the marginal large-scale uplift. The syn-uplift unit locally occurs on the hanging wall block of the bounding faults along the northern and southern margins. The uplift of the Haema Arch and its coeval fault-controlled subsidence possibly occurred during the late Oligocene. The post-uplift unit initially formed on remnant topographic lows during the early Miocene and subsequently covered the overall area of the Haema Arch and the Gunsan Basin. The late Oligocene uplifting of the Haema Arch can be interpreted as an isostatic response to tectonic unloading by the arch-bounding faults that possibly extend to detachment faults. We suggest that the Gunsan Basin underwent crustal thinning and extensional deformation during the late Oligocene, which accounts for the coeval uplifting and fault-controlled subsidence in the study area.     

Sapphirine/kornenipine-bearing rocks and crustal uplift history of the Limpopo belt,Southern Africa

Sapphirine/kornerupine-bearing rocks occur within the anorthosites of the Messina layered intrusion in the Limpopo mobile belt of Zimbabwe. The X_Mg range of the major minerals is as follows: cordierite (0.98-0.93); enstatite (0.97-0.86); chlorite (0.98-0.92); phlogopite (0.98-0.90); sapphirine (0.98-0.86); kornerupine (0.94-0.88); gedrite (0.96-0.85); spinel (0.92-0.78). There are four rock types, the constituent minerals of which have different values, which decrease in the above mineral order; other minerals are corundum, sillimanite and relict kyanite. We recognise twenty reactions without phlogopite and nine reactions involving phlogopite. The textural relations and the plots of the microprobe data of coexisting minerals in the MgO-Al₂O₃-SiO₂-(H₂O) system are consistent with the following sequence of main reactions: (1) enstatite+corundum cordierite+sapphirine; (4) sapphirine+sillimanite cordierite+corundum; (8) kornerupine+corundum cordierite+sapphirine; (13) kornerupine cordierite+sapphirine+enstatite; (15) enstatite+spinel chlorite+sapphirine; (18) cordierite+sapphirine chlorite+corundum; (20) sapphirine chlorite+corundum+spinel. The early reactions are shown by coarse-grained reaction intergrowths, kornerupine and gedrite breakdown is shown by finer-grained symplectites, and the latest reactions by very fine-grained products in micro-fractures. These selected reactions illustrate a remarkably steep trajectory from thePT peak close to 10 kbar and 800° C to the minimum observable at 3.5–4.5 kbar and 700° C as indicated by the pure MASH system. Very rapid uplift took place under nearly isothermal conditions. The protolith of this material was possibly sedimentary, derived from altered volcanic rocks. The bulk composition is close to the composition of kornerupine or to a mixture of alunite, chlorite and pyrophyllite. These texturally and mineralogically complex rocks contain a wealth of relevant data for documenting crustal uplift history.     

Petrological and geochemical characteristics of Marunthurkota syenites from the Kerala khondalite belt,southern India

This note reports new occurrences of syenite bodies around Marunthurkota area from the Kerala khondalite belt (KKB). Petrological and geochemical studies suggest that the syenites have a pronounced A-type affinity, metaluminous characteristics with high concentrations of alkalies, Rb, Sr, Zr, and high K₂O/Na₂O ratio. Miaskitic nature (agpaitic index<1) of syenite suggest involvement of CO₂ related phase in their genesis. The petrological characteristics signify crystallization of the rock at shallow levels within the crust. Geochemistry favours mantle origin of the magma and enrichment of Ba and Sr are indicative of involvement of carbonatite melt in the source region. The study envisages the presence of a juvenile CO₂ enriched upper mantle below the southern Indian continental crust during the Pan-African time.     

Physical volcanology and geochemistry of Palaeoarchaean komatiite lava flows from the western Dharwar craton,southern India: implications for Archaean mantle evolution and crustal growth

ABSTRACT

Palaeoarchaean (3.38–3.35 Ga) komatiites from the Jayachamaraja Pura (J.C. Pura) and Banasandra greenstone belts of the western Dharwar craton, southern India were erupted as submarine lava flows. These high-temperature (1450–1550°C), low-viscosity lavas produced thick, massive, polygonal jointed sheet flows with sporadic flow top breccias. Thick olivine cumulate zones within differentiated komatiites suggest channel/conduit facies. Compound, undifferentiated flow fields developed marginal-lobate thin flows with several spinifex-textured lobes. Individual lobes experienced two distinct vesiculation episodes and grew by inflation. Occasionally komatiite flows form pillows and quench fragmented hyaloclastites. J.C. Pura komatiite lavas represent massive coherent facies with minor channel facies, whilst the Bansandra komatiites correspond to compound flow fields interspersed with pillow facies. The komatiites are metamorphosed to greenschist facies and consist of serpentine-talc ± carbonate, actinolite–tremolite with remnants of primary olivine, chromite, and pyroxene. The majority of the studied samples are komatiites (22.46–42.41 wt.% MgO) whilst a few are komatiitic basalts (12.94–16.18 wt.% MgO) extending into basaltic (7.71 – 10.80 wt.% MgO) composition. The studied komatiites are Al-depleted Barberton type whilst komatiite basalts belong to the Al-undepleted Munro type. Trace element data suggest variable fractionation of garnet, olivine, pyroxene, and chromite. Incompatible element ratios (Nb/Th, Nb/U, Zr/Y Nb/Y) show that the komatiites were derived from heterogeneous sources ranging from depleted to primitive mantle. CaO/Al₂O₃ and (Gd/Yb)_N ratios show that the Al-depleted komatiite magmas were generated at great depth (350–400 km) by 40–50% partial melting of deep mantle with or without garnet (majorite?) in residue whilst komatiite basalts and basalts were generated at shallow depth in an ascending plume. The widespread Palaeoarchaean deep depleted mantle-derived komatiite volcanism and sub-contemporaneous TTG accretion implies a major earlier episode of mantle differentiation and crustal growth during ca. 3.6–3.8 Ga.     

Cordierite gneisses and associated lithologies of the Guri area,Northwest Guayana Shield,Venezuela

Gneisses in the Guri area of the Venezuelan Guayana Shield contain mineral assemblages with cordierite, garnet, sillimanite, hypersthene, biotite and Fe-Ti oxide intergrowths.Analysis of mineral assemblages and compositional relationships in the light of experimental data indicate metamorphic conditions of 725–800° C, 5–6 kb P _T , <P _T for the highest grade rocks and 650–700° C, 5–7 kb P _T , approximating P _T for the lowest grade rocks. Oxygen fugacities in different lithologies ranged between those of the MH and QFM buffers.The distribution coefficient K _D (Mg-Fe) (gar-bio), decreases by 0.006 per atom percent increase in (Mn/Mn+Mg+Fe)gar, falls in the range of K _D typical of the sillimanite-K feldspar zone and granulite facies, and is systematically lower in lower grade rocks-all in accord with observation in other localities. K _D (Mg-Fe) (cord-bio) ranges from 3.0 in the highest grade rocks to 10.0 in the lowest grade rocks, appears independent of FeO/MgO of cordierite or biotite, and varies systematically with grade. In contrast with conclusions based on observation in other localities, data from the Guri area suggest -K_D(cord-bio) may be a sensitive index of grade.A number of mineralogic and geologic observations are difficultly reconciled with existing experimental data.     

Alkali granite-syenite-carbonatite association in Munnar Kerala,India; implications for rifting,alkaline magmatism and liquid immiscibility

Occurrence of carbonatite is reported from the Munnar area, Kerala, where an alkali granite-syenite-carbonatite association is seen emplaced along the intersection zone of the Attur and Kerala fault-lineaments. The carbonatites are of two varieties, a calcite-rich sovite and a very coarse grained, calcite and dolomite bearing alvikite. Higher levels of SiO₂, Al₂O₃ and CaO are characteristic of these as compared to the composition of typical carbonatites. The transition element levels are high whereas the incompatible elements show lower values. The low Sr values, lower amount of apatite and absence of rare metal minerals preclude a primary carbonatite magma. The associated syenite and alkali granite have higher K₂O, K₂O/Na₂O, K/Rb, K/Ba and transition element levels. Petrochemical features suggest the rock association to be a result of separation of an immiscible fraction of less viscous carbonate liquid during cooling and ascent from a more viscous polymerized alkali silicate phase. The pre-requisites for melt equilibration and liquid immiscibility were achieved through volatile degassing related to crustal warping and rifting. The unique alkaline association of Munnar, which shows spatial relationships with deep-seated faults as well as a probable triple-point junction, is suggested to be a signature of late Precambrian alkaline magmatism which manifested in the Indian shield as a precursor to the rifting of the continental margin.     

Multi-stage crustal growth and Neoarchean geodynamics in the Eastern Dharwar Craton,southern India

The Dharwar Craton is a composite Archean cratonic collage that preserves important records of crustal evolution on the early Earth. Here we present results from a multidisciplinary study involving field investigations, petrology, zircon SHRIMP U–Pb geochronology with in-situ Hf isotope analyses, and whole-rock geochemistry, including Nd isotope data on migmatitic TTG (tonalite-trondhjemite-granodiorite) gneisses, dark grey banded gneisses, calc-alkaline and anatectic granitoids, together with synplutonic mafic dykes along a wide Northwest – Southeast corridor forming a wide time window in the Central and Eastern blocks of the Dharwar Craton. The dark grey banded gneisses are transitional between TTGs and calc-alkaline granitoids, and are referred to as ‘transitional TTGs’, whereas the calc-alkaline granitoids show sanukitoid affinity. Our zircon U–Pb data, together with published results, reveal four major periods of crustal growth (ca. 3360-3200 Ma, 3000-2960 Ma, 2700-2600 Ma and 2570-2520 Ma) in this region. The first two periods correspond to TTG generation and accretion that is confined to the western part of the corridor, whereas widespread 2670-2600 Ma transitional TTG, together with a major outburst of 2570–2520 Ma juvenile calc-alkaline magmatism of sanukitoid affinity contributed to peak continental growth. The transitional TTGs were preceded by greenstone volcanism between 2746 Ma and 2700 Ma, whereas the calc-alkaline magmatism was contemporaneous with 2570–2545 Ma felsic volcanism. The terminal stage of all four major accretion events was marked by thermal events reflected by amphibolite to granulite facies metamorphism at ca. 3200 Ma, 2960 Ma, 2620 Ma and 2520 Ma. Elemental ratios [(La/Yb)_N, Sr/Y, Nb/Ta, Hf/Sm)] and Hf-Nd isotope data suggest that the magmatic protoliths of the TTGs emplaced at different time periods formed by melting of thickened oceanic arc crust at different depths with plagioclase + amphibole ± garnet + titanite/ilmenite in the source residue, whereas the elemental (Ba–Sr, [(La/Yb)_N, Sr/Y, Nb/Ta, Hf/Sm)] and Hf-Nd isotope data [εHf_(T) = −0.67 to 5.61; εNd_(T) = 0.52 to 4.23; ] of the transitional TTGs suggest that their protoliths formed by melting of composite sources involving mantle and overlying arc crust with amphibole + garnet + clinopyroxene ± plagioclase + ilmenite in the residue. The highly incompatible and compatible element contents (REE, K–Ba–Sr, Mg, Ni, Cr), together with Hf and Nd isotope data [εHf_(T) = 4.5 to −3.2; εNd_(T) = 1.93 to −1.26; ], of the sanukitoids and synplutonic dykes suggest their derivation from enriched mantle reservoirs with minor crustal contamination. Field, elemental and isotope data [εHf_(T) = −4.3 to −15.0; εNd_(T) = −0.5 to −7.0] of the anatectic granites suggest their derivation through reworking of ancient as well as newly formed juvenile crust. Secular increase in incompatible as well as compatible element contents in the transitional TTGs to sanukitoids imply progressive enrichment of Neoarchean mantle reservoirs, possibly through melting of continent-derived detritus in a subduction zone setting, resulting in the establishment of a sizable continental mass by 2700 Ma, which in turn is linked to the evolving Earth. The Neoarchean geodynamic evolution is attributed to westward convergence of hot oceanic lithosphere, with continued convergence resulted in the assembly of micro-blocks, with eventual slab break-off leading to asthenosphere upwelling caused extensive mantle melting and hot juvenile magma additions to the crust. This led to lateral flow of hot ductile crust and 3D mass distribution and formation of an orogenic plateaux with subdued topography, as indicated by strain fabric data and strong seismic reflectivity along an E-W crustal profile in the Central and Eastern blocks of the Dharwar Craton.     

黔中隆起及周缘地区下组合含油气流体包裹体研究

应用均一法测温及激光拉曼探针等技术对黔中隆起地区下组合含油气流体包裹体进行了研究,结果表明该区烃类包裹体个体较小,无色,形态不规则,其烃类成分以CH4为主,具明显干气特征,部分包裹体内含CO2,分析认为是碳酸盐(碳酸氢钙)因温度、压力的变化分解所致.均一温度测试结果显示下组合油气包裹体形成时的温度分别位于85～125℃、125～165℃两个温度段,结合该地区埋藏史及古地温史研究,确定本区成藏期分别为早中寒武世-早三叠世及早三叠世-中晚侏罗世.     

Retrograde deformation within the Carthage-Colton Zone as recorded by fluid inclusions and feldspar compositions: tectonic implications for the southern Grenville Province

The Carthage-Colton Zone (CCZ), located in the northwestern portion of the Proterozoic Adirondack terrane, forms the boundary between the Adirondack lowlands and highlands and is characterized by textures indicative of ductile deformation. Samples from three rock types have been collected from this zone: (1) pyroxene bearing syenite gneisses of the Diana igneous complex; (2) paragneiss samples from near the northwestern boundary of the Diana complex; (3) a quartz-rich metasediment. Feldspar geothermometry performed on the Diana metasyenites shows that porphyroclasts are relict igneous grains that formed atT900° C, while dynamic recrystallization occurred at temperatures as low as 470 to 550° C as shown by the compositions of feldspar neoblasts. All samples examined in this study from the CCZ contain a suite of CO₂-rich fluid inclusions that are distinctive both texturally and in their microthermometric behavior (Th=-27.7 to-7.1° C) as compared to CO₂-rich Adirondack fluid inclusions that do not lie within this zone (Th=-45.9 to +31.0° C). The results from fluid inclusion microthermometry and feldspar geothermometry restrict the conditions of dynamic recrystallization to temperatures and pressures of 400 to 550° C and 3 to 5 kbar. The retrograde pressure-temperature path must pass through these conditions. Similar fluid inclusion results have been obtained from the Parry Sound Shear Zone (PSSZ) which is a Grenvillian shear zone that is located in Southern Ontario (Lamb and Moecher 1992). However, the inferred retrogradeP-T paths for these two areas, the CCZ and the PSSZ, are different and this difference may be a result of late deformation along shear zones that are located between the two areas.