Thomsen's parameters from p‐wave measurements in a spherical sample‡

The aim of this paper is to understand the seismic anisotropy of the overburden shale in an oilfield in the North West Shelf of Western Australia. To this end, we first find the orientation of the symmetry axis of a spherical shale sample from measurements of ultrasonic P‐wave velocities in 132 directions at the reservoir pressure. After transforming the data to the symmetry axis coordinates, we find Thomsen's anisotropy parameters δ and ? using these measurements and measurements of the shear‐wave velocity along the symmetry axis from a well log. To find these anisotropy parameters, we use a very fast simulated re‐annealing algorithm with an objective function that contains only the measured ray velocities, their numerical derivatives and the unknown elasticity parameters. The results show strong elliptical anisotropy in the overburden shale. This approach produces smaller uncertainty of Thomsen parameter δ than more direct approaches.     

The effect of clay distribution on the elastic properties of sandstones

The shape and location of clay within sandstones have a large impact on the P‐wave and S‐wave velocities of the rock. They also have a large effect on reservoir properties and the interpretation of those properties from seismic data and well logs. Numerical models of different distributions of clay – structural, laminar and dispersed clay – can lead to an understanding of these effects. Clay which is located between quartz grains, structural clay, will reduce the P‐wave and S‐wave velocities of the rock. If the clay particles become aligned or form layers, the velocities perpendicular to the alignment will be reduced further. S‐wave velocities decrease more rapidly than P‐wave velocities with increasing clay content, and therefore Poisson's ratios will increase as the velocities decrease. These effects are more pronounced for compacted sandstones. Small amounts of clay that are located in the pore space will have little effect on the P‐wave velocity due to the competing influence of the density effect and pore‐fluid stiffening. The S‐wave velocity will decrease due to the density effect and thus the Poisson's ratio will increase. When there is sufficient clay to bridge the gaps between the quartz grains, P‐wave and S‐wave velocities rise rapidly and the Poisson's ratios decrease. These effects are more pronounced for under‐compacted sandstones. These general results are only slightly modified when the intrinsic anisotropy of the clay material is taken into account. Numerical models indicate that there is a strong, nearly linear relationship between P‐wave and S‐wave velocity which is almost independent of clay distribution. S‐wave velocities can be predicted reasonably accurately from P‐wave velocities based on empirical relationships. However, this does not provide any connection between the elastic and petrophysical properties of the rocks. Numerical modelling offers this connection but requires the inclusion of clay distribution and anisotropy to provide a model that is consistent with both the elastic and petrophysical properties. If clay distribution is ignored, predicting porosities from P‐wave or S‐wave data, for example, can result in large errors. Estimation of the clay distribution from P‐wave and S‐wave velocities requires good estimates of the porosity and clay volume and verification from petrographic analyses of core or cuttings. For a real data example, numerical models of the elastic properties suggest the predominance of dispersed clay in a fluvial sand from matching P‐wave and S‐wave velocity well log data using log‐based estimates of the clay volume and porosity. This is consistent with an interpretation of other log data.     

Influence of crack distribution of rocks on P‐wave velocity anisotropy – a laboratory and field scale study‡

The purpose of this paper is the comparison of P‐wave velocity and velocity anisotropy, measured at different scales under laboratory and field conditions. A shallow seismic refraction survey with shot/receiver spacing of up to 10 m was carried out on a flat outcrop of lhertzolite in the southern part of the Balmuccia massif. Oriented rock samples were also obtained from the locality. The particular advantage of the laboratory method used is the possibility of measuring velocity in any direction under controlled conditions. Laboratory tests were made on spherical peridotite samples, 50 mm in diameter, by ultrasonic velocity measurements in 132 directions (meridian and parallel networks) under confining stress ranging from atmospheric to 400 MPa. The mean P‐wave velocity of the field and laboratory data differed by between 20–30%. In addition, P‐wave velocity anisotropy of 25% was detected in the field data. Whereas the anisotropy in the laboratory samples in the same orientation as the field surveys was less than 2%. This observed scaling factor is related to the different sampling sizes and the difference in frequencies of applied elastic waves. With an ultrasonic wavelength of 10 mm, laboratory samples represent a continuum. The field velocities and velocity anisotropy reflect the presence of cracks, which the laboratory rock samples do not contain. Three sub‐vertical fracture sets with differing strikes were observed in the field outcrop. Estimates of fracture stiffness from the velocity anisotropy data are consistent with other published values. These results highlight the difficulty of using laboratory velocity estimates to interpret field data.     

Experimental estimation of velocities and anisotropy of a series of Swedish crystalline rocks and ores

To provide a guide for future deep (<1.5 km) seismic mineral exploration and to better understand the nature of reflections imaged by surface reflection seismic data in two mining camps and a carbonatite complex of Sweden, more than 50 rock and ore samples were collected and measured for their seismic velocities. The samples are geographically from the northern and central parts of Sweden, ranging from metallic ore deposits, meta‐volcanic and meta‐intrusive rocks to deformed and metamorphosed rocks. First, ultrasonic measurements of P‐ and S‐wave velocities at both atmospheric and elevated pressures, using 0.5 MHz P‐ and S‐wave transducers were conducted. The ultrasonic measurements suggest that most of the measured velocities show positive correlation with the density of the samples with an exception of a massive sulphide ore sample that shows significant low P‐ and S‐wave velocities. The low P‐ and S‐wave velocities are attributed to the mineral texture of the sample and partly lower pyrite content in comparison with a similar type sample obtained from Norway, which shows significantly higher P‐ and S‐wave velocities. Later, an iron ore sample from the central part of Sweden was measured using a low‐frequency (0.1–50 Hz) apparatus to provide comparison with the ultrasonic velocity measurements. The low‐frequency measurements indicate that the iron ore sample has minimal dispersion and attenuation. The iron ore sample shows the highest acoustic impedance among our samples suggesting that these deposits are favourable targets for seismic methods. This is further demonstrated by a real seismic section acquired over an iron ore mine in the central part of Sweden. Finally, a laser‐interferometer device was used to analyse elastic anisotropy of five rock samples taken from a major deformation zone in order to provide insights into the nature of reflections observed from the deformation zone. Up to 10% velocity‐anisotropy is estimated and demonstrated to be present for the samples taken from the deformation zone using the laser‐interferometery measurements. However, the origin of the reflections from the major deformation zone is attributed to a combination of anisotropy and amphibolite lenses within the deformation zone.     

Estimating azimuthal stress‐induced P‐wave anisotropy from S‐wave anisotropy using sonic log or vertical seismic profile data

Most sedimentary rocks are anisotropic, yet it is often difficult to accurately incorporate anisotropy into seismic workflows because analysis of anisotropy requires knowledge of a number of parameters that are difficult to estimate from standard seismic data. In this study, we provide a methodology to infer azimuthal P‐wave anisotropy from S‐wave anisotropy calculated from log or vertical seismic profile data. This methodology involves a number of steps. First, we compute the azimuthal P‐wave anisotropy in the dry medium as a function of the azimuthal S‐wave anisotropy using a rock physics model, which accounts for the stress dependency of seismic wave velocities in dry isotropic elastic media subjected to triaxial compression. Once the P‐wave anisotropy in the dry medium is known, we use the anisotropic Gassmann equations to estimate the anisotropy of the saturated medium. We test this workflow on the log data acquired in the North West Shelf of Australia, where azimuthal anisotropy is likely caused by large differences between minimum and maximum horizontal stresses. The obtained results are compared to azimuthal P‐wave anisotropy obtained via orthorhombic tomography in the same area. In the clean sandstone layers, anisotropy parameters obtained by both methods are fairly consistent. In the shale and shaly sandstone layers, however, there is a significant discrepancy between results since the stress‐induced anisotropy model we use is not applicable to rocks exhibiting intrinsic anisotropy. This methodology could be useful for building the initial anisotropic velocity model for imaging, which is to be refined through migration velocity analysis.     

Love-Rayleigh wave incompatibility and possible deep upper mantle anisotropy in the Iberian peninsula

Love and Rayleigh wave phase velocities are analyzed with the goal of retrieving information about the anisotropic structure of the Iberian lithosphere. The cross-correlation method is used to measure the interstation phase velocities between diverse stations of the ILIHA network at periods between 20 and 120 s. Despite the 2-D structure of the network, the Love wave data are too few to enable an analysis of phase velocity azimuthal variations. Azimuthal averages of Love and Rayleigh wave phase velocities are calculated and inverted both in terms of isotropic and anisotropic structures. Realistic isotropic models explain the Rayleigh wave and short-period Love wave phase velocities. Therefore no significant anisotropy needs to be introduced in the crust and down to 100 km depth in the upper mantle to explain our data. A discrepancy is observed only at long periods, where the data are less reliable. Love wave data at periods between 80 and 120 s remain 0.15 km/s faster than predicted by isotropic models explaining the long-period Rayleigh wave data. Possibilities of biases in the measurements due to interferences with higher modes are examined but seem unlikely. A transversely isotropic model with 8% of S-wave velocity anisotropy in the upper mantle at depths larger than 100 km can explain the whole set of data. In terms of a classical model of mantle anisotropy, this corresponds to 100% of the crystals perfectly oriented in the horizontal plane in a pyrolitic mantle. This is a rather extreme model, which predicts at time delay between 0 and 2 seconds for split SKS.     

云南高黎贡山典型板岩地震波各向异性研究

板岩作为一种浅变质岩在我国有着广泛的分布,对其地震波速度的研究将有助于对这类过渡性岩石的有效区分,对于浅层地壳的各向异性研究也具有重要意义.本文对采自云南丙中洛地区的板岩样品进行了地震波速度的室内实验研究,其中部分实验是在加拿大Dalhousie High Pressure Laboratory完成.实验获得了板岩在围压10~600 MPa条件下、不同构造主方向（X,Y和Z）上的地震波速度,在围压600 MPa时,X、Y、Z三个方向的P波速度分别为6.58、6.46、5.91 km/s,平均速度为6.30 km/s,S波平均速度约为3.62 km/s,V_P/V_S=1.74;并初步分析了板岩地震波速度、横波分裂及其波速各向异性随着围压的变化规律,发现所测量的板岩在较低围压（<150 MPa）时波速的各向异性随围压升高而迅速减小,主要是由于其内部微裂隙的定向排列引起的,而随着围压的继续增加（>150 MPa时）微裂隙基本闭合,黑云母、阳起石等片状矿物的定向排列成为其地震波各向异性的主导诱因,此时（围压为600 MPa）V_P、V_S的各向异性分别稳定在13%、16%左右.本研究所获取的基础实验数据及所探讨的板岩地震波性质将为确定地壳上部显微裂隙的优选定向、浅层地壳的各向异性分析、地球物理模型条件约束等提供基础.     

Stress‐dependent elastic anisotropy of sandstones

Elastic wave velocities in sandstones vary with stress due to the presence of discontinuities such as grain boundaries and microcracks within the rock. In the presence of non-hydrostatic stress fields the elastic wave velocities in sandstones often show significant stress-induced anisotropy. The elastic anisotropy due to any discontinuities within the rock can be written in terms of a second-rank and a fourth-rank tensor which quantify the effect on the elastic wave velocities of the orientation distribution and normal and shear compliances of the discontinuities. This allows elastic wave velocity measurements to be inverted to obtain the components of these tensors. Application of the method to ultrasonic velocity measurements made in a triaxial loading frame shows that a simple theory using only the second-rank tensor allows the P-wave stress-induced anisotropy to be predicted to reasonable accuracy from the S-wave anisotropy and vice versa, thus confirming the correctness of the underlying model. Deviations between the measurements and the predictions of this simplified theory are used to determine the ratio of the normal to shear compliance of the discontinuities. The discontinuities are found to be more compliant in shear than in compression.     

Effect of sub‐core scale heterogeneities on acoustic and electrical properties of a reservoir rock: a CO2 flooding experiment of brine saturated sandstone in a computed tomography scanner

The effect of sub‐core scale heterogeneity on fluid distribution pattern, and the electrical and acoustic properties of a typical reservoir rock was studied by performing drainage and imbibition flooding tests with CO₂ and brine in a laboratory. Moderately layered Rothbach sandstone was used as a test specimen. Two core samples were drilled; one perpendicular and the other parallel to the layering to allow injection of fluids along and normal to the bedding plane. During the test 3D images of fluid distribution and saturation levels were mapped by an industrial X‐ray CT‐scanner together with simultaneous measurement of electrical resistivity, ultrasonic velocities as well as amplitudes. The results showed how the layering and the flooding direction influenced the fluid distribution pattern and the saturation level of the fluids. For a given fluid saturation level, the measured changes in the acoustic and electrical parameters were affected by both the fluid distribution pattern and the layering orientation relative to the measurement direction. The P‐wave amplitude and the electrical resistivity were more sensitive to small changes in the fluid distribution patterns than the P‐wave velocity. The change in amplitude was the most affected by the orientation of the layering and the resulting fluid distribution patterns. In some instances the change due to the fluid distribution pattern was higher than the variation caused by the change in CO₂ saturation. As a result the Gassmann relation based on ‘uniform' or ‘patchy' saturation pattern was not suitable to predict the P‐wave velocity variation. Overall, the results demonstrate the importance of core‐imaging to improve our understanding of fluid distribution patterns and the associated effects on measured rock‐physics properties.     

低孔隙度泥页岩应力依赖的各向异性裂纹演化特性研究

本文在实验室对所获取的东营地区层理发育的低孔隙度页岩和泥岩的各向异性裂纹演化特性进行了研究,获得了各向同性条件下泥页岩的力学与超声波响应特性,分析了应力幅度对于页岩声波速度和各向异性的影响.主要结论包括:(1)泥页岩在循环载荷下存在滞后效应,表明其经历了去压实或油气产生导致的超压;(2)泥岩和页岩具有不同程度的各向异性,随着各向同性压力的增高微裂隙逐渐闭合,样品的各向异性程度减弱;(3)分析了岩石韧度和裂纹损伤参数随压力的变化特征,相比泥岩,页岩各向异性程度更高,随压力变化更明显,其裂纹导致的附加各向异性更强;(4)分析了各向异性岩石的动态弹性模量特征,由于软裂隙空间的闭合,动态弹性模量在低压条件下都随着围压的增加有硬化趋势.     

不同尺度裂缝对弹性波速度和各向异性影响的实验研究

裂缝广泛分布于地球介质中并且具有多尺度的特点,裂缝尺度对于油气勘探和开发有着重要的意义.本文制作了一组含不同长度裂缝的人工岩样,其中三块含裂缝岩样中的裂缝直径分别为2 mm、3 mm和4 mm,裂缝的厚度都约为0.06 mm,裂缝密度大致相同(分别为4.8%、4.86%和4.86%).在岩样含水的条件下测试不同方向上的纵横波速度,实验结果表明,虽然三块裂缝岩样中的裂缝密度大致相同,但是含不同直径裂缝岩样的纵横波速度存在差异.在各个方向上,含数量众多的小尺度裂缝的岩样中纵横波速度都明显低于含少量的大尺度裂缝的岩样中纵横波速度.尤其是对纵波速度和SV波速度,在不同尺度裂缝岩样中的差异更明显.在含数量多的小尺度裂缝的岩样中纵波各向异性和横波各向异性最高,而含少量的大尺度的裂缝的岩样中的纵波各向异性和横波各向异性较低.实验测量结果与Hudson理论模型预测结果进行了对比分析,结果发现Hudson理论考虑到了裂缝尺度对纵波速度和纵波各向异性的影响,但是忽略了其对横波速度和横波各向异性的影响.     

利用瑞利面波相速度和方位各向异性研究鄂尔多斯块体的岩石圈变形特征

利用在鄂尔多斯块体内部布设的45个宽频带流动台站和固定台站的资料,用双平面波方法反演了20~143 s共12个周期的基阶瑞利面波的平均相速度和方位各向异性,并反演了一维S波速度结构.反演结果显示50~100 s中长周期的瑞利面波相速度高于AK135速度模型的相速度,为高速异常,S波速度显示高速异常主要位于180 km深度范围内,表明鄂尔多斯块体保留有厚的高速岩石圈.20~111 s周期的方位各向异性强度小于1%,较小的各向异性表明鄂尔多斯块体岩石圈变形较弱.20~50 s周期的平均快波方向为近EW向,67~143 s周期的平均快波方向为NW-SE向,相对发生了整体改变,快波方向的转变约开始于80~100 km深度范围,这表明岩石圈上下部存在着由不同变形机制导致的各向异性.上部岩石圈中各向异性可能主要为残留的“化石”各向异性,而下部岩石圈各向异性可能是现今板块构造运动导致的变形而形成.鄂尔多斯块体岩石圈垂向上的变形差异可能主要与岩石圈温度随深度的变化以及青藏高原NE-NNE向挤压引起的上部岩石圈逆时针旋转有关.     

Simulation of full-waveform log in saturated cracked formations using Hudson's approach

We study the propagation of elastic waves that are generated in a fluid‐filled borehole surrounded by a cracked transversely isotropic medium. In the model studied the anisotropy and borehole axes coincide. To obtain the effective elastic moduli of a cracked medium we have applied Hudson's theory that enables the determination of the overall properties as a function of the crack orientation in relation to the symmetry axis of the anisotropic medium. This theory takes into account the hydrodynamic mechanism of the elastic‐wave attenuation caused by fluid filtration from the cracks into a porous matrix. We have simulated the full waveforms generated by an impulse source of finite length placed on the borehole axis. The kinematic and dynamic parameters of the compressional, shear and Stoneley waves as functions of the matrix permeability, crack orientation and porosity were studied. The modelling results demonstrated the influence of the crack‐system parameters (orientation and porosity) on the velocities and amplitudes of all wave types. The horizontally orientated cracks result in maximal decrease of the elastic‐wave parameters (velocities and amplitudes). Based on the fact that the shear‐ and Stoneley‐wave velocities in a transversely isotropic medium are determined by different shear moduli, we demonstrate the feasibility of the acoustic log to identify formations with close to horizontal crack orientations.     

Preliminary models of upper mantle P and S wave velocity structure in the western South America region

Upper mantle P and S wave velocities in the western South America region are obtained at depths of foci from an analysis of travel time data of deep earthquakes. The inferred velocity models for the Chile–Peru–Ecuador region reveal an increase of P velocity from 8.04 km/s at 40 km to 8.28 km/s at 250 km depth, while the S velocity remains almost constant at 4.62 km/s from 40 to 210 km depth. A velocity discontinuity (probably corresponding to the L discontinuity in the continental upper mantle) at 220–250 km depth for P and 200–220 km depth for S waves, with a 3–4% velocity increase, is inferred from the velocity–depth data. Below this discontinuity, P velocity increases from 8.54 km/s at 250 km to 8.62 km/s at 320 km depth and S velocity increases from 4.81 km/s at 210 km to 4.99 km/s at 290 km depth. Travel time data from deep earthquakes at depths greater than 500 km in the Bolivia–Peru region, reveal P velocities of about 9.65 km/s from 500 to 570 km depth. P velocity–depth data further reveal a velocity discontinuity, either as a sharp boundary at 570 km depth with 8–10% velocity increase or as a broad transition zone with velocity rapidly increasing from 560 to 610 km depth. P velocity increases to 10.75 km/s at 650 km depth. A comparison with the latest global average depth estimates of the 660 km discontinuity reveals that this discontinuity is at a relatively shallow depth in the study region. Further, a velocity discontinuity at about 400 km depth with a 10% velocity increase seems to be consistent with travel time observations from deep earthquakes in this region.     

云南西部地壳深部结构特征

在云南西部,穿过红河、小江断裂带完成了一条长360 km、呈北东向的深地震宽角反射/折射剖面.通过对该测线的观测资料进行一维、二维模拟解释,得到了沿剖面的二维地壳速度模型.研究结果显示,沿测线Moho界面埋深横线变化大,其西南侧Moho埋深约35 km,东北侧Moho最大埋深可达43 km.沿剖面从西南到北东方向,地壳平均P波速度从5.9 km/s逐渐增加到6.13 km/s,但显著低于全球大陆平均值.结合以往的接收函数和面波联合反演结果,我们推算沿测线从西南到东北,其下方地壳泊松比介于0.23~0.25之间.剖面西南侧上地壳具有异常低的P波速度和泊松比,暗示其下方上地壳以α-相长英质组分为主;而剖面东北上地壳相对较高的P波速度和泊松比则暗示其物质组成以花岗岩-花岗闪长岩为主.研究区下地壳的P波速度和泊松比分别介于6.25~6.75 km/s和0.24~0.26 km/s之间,暗示其上部组成以花岗岩相的片麻岩为主,而下部组成则以角闪石类岩石为主.红河断裂两侧地壳速度显著不同,从浅到深其速度差异逐渐变弱,但红河断裂两侧地壳厚度变化较大.而小江断裂下方两侧地壳速度和地壳厚度变化并没有红河断裂那么明显.     

Pore fluid viscosity effects on P‐ and S‐wave anisotropy in synthetic silica‐cemented sandstone with aligned fractures

Ultrasonic (500 kHz) P‐ and S‐wave velocity and attenuation anisotropy were measured in the laboratory on synthetic, octagonal‐shaped, silica‐cemented sandstone samples with aligned penny‐shaped voids as a function of pore fluid viscosity. One control (blank) sample was manufactured without fractures, another sample with a known fracture density (measured from X‐ray CT images). Velocity and attenuation were measured in four directions relative to the bedding fabric (introduced during packing of successive layers of sand grains during sample construction) and the coincident penny‐shaped voids (fractures). Both samples were measured when saturated with air, water (viscosity 1 cP) and glycerin (100 cP) to reveal poro‐visco‐elastic effects on velocity and attenuation, and their anisotropy. The blank sample was used to estimate the background anisotropy of the host rock in the fractured sample; the bedding fabric was found to show transverse isotropy with shear wave splitting (SWS) of 1.45 ± 1.18% (i.e. for S‐wave propagation along the bedding planes). In the fractured rock, maximum velocity and minimum attenuation of P‐waves was seen at 90° to the fracture normal. After correction for the background anisotropy, the fractured sample velocity anisotropy was expressed in terms of Thomsen's weak anisotropy parameters ε, γ & δ. A theory of frequency‐dependent seismic anisotropy in porous, fractured, media was able to predict the observed effect of viscosity and bulk modulus on ε and δ in water‐ and glycerin‐saturated samples, and the higher ε and δ values in air‐saturated samples. Theoretical predictions of fluid independent γ are also in agreement with the laboratory observations. We also observed the predicted polarisation cross‐over in shear‐wave splitting for wave propagation at 45° to the fracture normal as fluid viscosity and bulk modulus increases.     

A laboratory study of seismic velocity and attenuation anisotropy in near-surface sedimentary rocks

The laboratory ultrasonic pulse‐echo method was used to collect accurate P‐ and S‐wave velocity (±0.3%) and attenuation (±10%) data at differential pressures of 5–50 MPa on water‐saturated core samples of sandstone, limestone and siltstone that were cut parallel and perpendicular to the vertical borehole axis. The results, when expressed in terms of the P‐ and S‐wave velocity and attenuation anisotropy parameters for weakly transversely isotropic media (ɛ, γ, ɛ_Q, γ_Q) show complex variations with pressure and lithology. In general, attenuation anisotropy is stronger and more sensitive to pressure changes than velocity anisotropy, regardless of lithology. Anisotropy is greatest (over 20% for velocity, over 70% for attenuation) in rocks with visible clay/organic matter laminations in hand specimens. Pressure sensitivities are attributed to the opening of microcracks with decreasing pressure. Changes in magnitude of velocity and attenuation anisotropy with effective pressure show similar trends, although they can show different signs (positive or negative values of ɛ, ɛ_Q, γ, γ_Q). We conclude that attenuation anisotropy in particular could prove useful to seismic monitoring of reservoir pressure changes if frequency‐dependent effects can be quantified and modelled.     

利用含可控裂缝人工岩样研究裂缝密度对各向异性的影响

利用新方法制作出含可控裂缝的双孔隙人工砂岩物理模型,具有与天然岩石更为接近的矿物成分、孔隙结构和胶结方式,其中裂缝密度、裂缝尺寸和裂缝张开度等裂缝参数可以控制以得到实验所需要的裂缝参数,岩样具有真实的孔隙和裂缝空间并可以在不同饱和流体状态下研究流体性质对于裂缝介质性质的影响.本次实验制作出一组具有不同裂缝密度的含裂缝人工岩样,对岩样利用SEM扫描电镜分析可以看到真实的孔隙结构和符合我们要求的裂缝参数,岩样被加工成八面棱柱以测量不同方向上弹性波传播的速度,用0.5 MHz的换能器使用透射法测量在饱和空气和饱和水条件下各个样品不同方向上的纵横波速度,并得出纵横波速度、横波分裂系数和纵横波各向异性强度受裂缝密度和饱和流体的影响.研究发现流体对于纵波速度和纵波各向异性强度的影响较强,而横波速度、横波分裂系数和横波各向异性强度受饱和流体的影响不大,但是对裂缝密度的变化更敏感.     

阿尔泰-阿尔金地学断面地壳结构

根据阿尔泰—阿尔金地学断面的地震纵、横波资料,建立了地壳速度及泊松比结构. 测区的地壳具有明显的三分结构特征,其纵波速度自上而下依次为6.0～6.3km/s、6.3～6.6km/s及6.9～7.0km/s;阿尔泰南缘的地壳最厚,为56km,准噶尔盆地的地壳最薄,为46km,大部分地区的地壳厚度为50km 左右. 准噶尔盆地与天山之间上地幔顶部的纵波速度为7.7～7.8km/s ;阿尔泰南缘及塔里木盆地上地幔顶部的纵波速度较高,为7.9～8.0km/s. 测线南部,包括东天山及塔里木东缘,自地表至30km深处的地壳纵波速度低,泊松比为0.25,表明上地壳主要为石英及花岗质成分;而测线北部(包括阿尔泰及准噶尔盆地)的中、上地壳则呈现较高的泊松比（0.26～0.27）,可能为基性地壳的体现. 厚15～30km的下地壳纵波速度（6.9～7.0km/s）较高,泊松比为0.26～0.28,可能以镁铁质的麻粒岩成分为主. 位于天山及其南侧地壳中部的低速层（VP=5.9km/s, σ=0.25）则可能为晚古生代的构造热事件中的花岗质侵入岩.     

利用远震接收函数方法研究南海西沙群岛下方地壳结构

利用西沙琛航岛流动地震台站和永兴岛固定地震台站的资料,提取了远震P波接收函数,结合正演和反演方法模拟了台站下方的地壳结构.模拟结果显示:西沙群岛地壳顶部存在2 km厚的新生代低速沉积层,横波速度只有2.0~2.2 km/s;上地壳为一速度梯度带,横波速度由2 km处的3.4 km/s逐渐增加到12 km深度时的3.8 ...